The population of soweto is rising due to City of Johannesburg's latest draft Integrated Development Plans (IDP) indicating that the province increased by a little over 1.7 million people between 2012 and 2017 – which is the equal of adding the population of Soweto every five years.
What is Soweto understood for?Soweto is widely understood for a series of demonstrations led by thousands of black school-aged pupils in 1976 to oppose the introduction of Afrikaans in local schools. Researchers were met with police brutality and hundreds of children lost their lives at the writings of law enforcement.
Why is the inhabitants of Johannesburg growing?Johannesburg grew overnight when gold was located in 1896, drawing people from about the world. By 1931, the population had surpassed 400,000, which then creased during the Second World War. In 1995, the UN estimated that the Johannesburg metropolitan area had a inhabitants of 1.8 million.
To learn more about the population, refer
https://brainly.com/question/1437549
#SPJ9
Use technology to create a scatter plot of the data collected for the first ten exoplanets in Part 1. In two or more complete sentences describe the trend in the data values displayed by the scatterplot. In your description, include what type of technology was used to create the scatterplot. Upload your scatter plot and summary in the box below.
The data about exoplanets are missing here but a scatter plot is a diagram used to represent the association between two or more variables.
What is a scatter plot?A scatter plot is a graphical representation of the relationships between two or more variables, which are presented by specific dots spread along the diagram.
The main technology that can be used to diagram a scatter plot is an Excel file by going to the Insert tab (charts group) and then clicking the Scatter symbol.
In conclusion, the data about exoplanets are missing here but a scatter plot is a diagram used to represent the association between two or more variables.
Learn more about scatter plots here:
https://brainly.com/question/27874837
https://brainly.com/question/6592115
#SPJ1
Why are assemblages of fossils seen in successive geological periods so different?
The reason behind the assemblages of fossils is so different because there was a rapid continental drift.
What is continental drift?When there was a motion that took place among the tectonic plates and as a result there was the movement of the continents. It was a hypothesis in the context of the Earth's continents.
According to it, it is the Earth's continents that have been moved over geologic time relative to each other. Because of all this, there was an appearance of the drift across the ocean bed. All this resulted in assemblages of fossils in such a way, that it appears different on different continents.
Thus, the assemblages of fossils were seen so differently because there was a rapid continental drift.
Learn more about continental drift from here:
https://brainly.com/question/15122129
#SPJ4
Why does building on flood plains increase the risk of flood disasters?
A. All of these
B. The soft, permeable ground is not strong enough to support dams or flood defenses, leaving towns vulnerable.
C. Flood plains are made of porous layers of earth and rock . When it floods, they soak up water and become swollen, which can knock down buildings on top of them.
D. Developing an area usually includes laying asphalt, concrete and other impermeable materials which prevent the ground from soaking up water.
Answer:
C.
Explanation:
The rocks soak up and become more heavier to be underground so it rises up and start destroying buildings from the under
A point b on a segment with endpoints a (1,4) and c (8,2) partitions the segment in a 3:1 ratio. find the coordinates of point b
Our overall goal in this problem is to find the location of a point b that lies on the line between points A and C.
What do know from what's given?
Location of point A
Location of point C
The relative distance of point B along the segment/line AC (given as a ratio of 3:1)
Now that we have listed everything we know, lets figure out what we can calculate based on this information:
Since we have both the locations of points A and C, lets calculate the length of this segment. For this we can think of this edge as the hypotenuse of a right triangle that is formed from the height (which is the distance between the x-coordinates) and the base (which is the distance between the y-coordinates).
We'll need two equations here:
Distance:
Calculate the distances for the height and the base of this triangle formed from the segment AC (the hypotenuse of the right triangle)
a (base) = |x2 - x1| ... where A (x1,y1) and C (x2,y2)
b (height) = |y2 - y1| ... where A (x1,y1) and C (x2,y2)
Note: Absolute value is used here since distance is always positive
Pythagorean Theorem:
Once we know the distance of the base and the height, we'll be able to calculate the segment (aka the hypotenuse of this formed triangle)
c2 = a2 + b2
After we calculate the distances for a and b, we can then solve for c, giving us the length of segment AC. Great! We're halfway there - next is to figure out how far point B is from points A and C, using the distance along the segment AC.
Recall the third piece of information we were given: the relative distance of point T along segment AC. How can we represent this information in an equation using the distance of segment AC?
The ratio to which point T splits the segment AC is given as 3:1 - this means that one part is 3 times as long as the other part. The natural question to ask here is "3 times as long as what?" This 'what' piece is what we want to find out - lets call it x.
Another important observation to make is that this ratio is describing two parts of a whole segment - so if we think of this is two pieces of a whole, we can think of it as '3 times something' and '1 times something' is equivalent to the entire segment.
So, using this terminology with x, lets rewrite what we said in words into an equation:
3x + 1x = c (Length of AC)
Solving for x, we see that x = [tex]\frac{C}{4}[/tex]
Now that we have the distance from point D to point T, and from Point T to point F, we can take up the final step of determining the location of T.
Lets imagine the entire segment ABC as the hypotenuse of a triangle again. This time we want to imagine (feel free to draw this yourself as well) a like straight down from T, perpendicular to the base of this right triangle.
What we have now is a small right triangle (with segment DT as the hypotenuse) within a larger right triangle (with segment DF as the hypotenuse). What this means is that we have two proportional triangles.
With this information, we can create a proportion statement that says:
(AT) Hypotenuse small Triangle / Height smallTriangle ~ (AC) Hypotenuse large Triangle / (b) Height large Triangle
Recall that we had solved for b in the beginning as the y distance between points D and F. This means the only variable missing is Height small Triangle, which results to be:
Height small Triangle = (AT) Hypotenuse small Triangle × (b) Height large Triangle / (DF) Hypotenuse large Triangle
Adding Height small Triangle to the y coordinate of point F gives us point T's y coordinate.
Now that we have the hypotenuse length and the height length of the small triangle formed by AT (as the hypotenuse) we can plug in those numbers into the Pythagorean theorem to since for there final missing side: the base:
Base small Triangle 2 = (AT) Hypotenuse small Triangle 2 Height small Triangle 2
Finally, we add Base small Triangle to the x coordinate of point B gives us point T's x coordinate.
Learn more about point segment :
brainly.com/question/4939857
#SPJ4
What was the proximate cause of the most recent mass extinction event (65 million years ago) recorded in the fossil record?
Meteorite impact was the proximate cause of the most recent mass extinction event (65 million years ago) recorded in the fossil record.
What was Meteorite impact?
A meteorite impact happens when an object that was circling the Sun that is stony, metallic (usually iron), or ice flies through the atmosphere and collides with the surface of the Earth.
What are the effects of a meteorite impact?
Asteroid impacts can have a variety of negative effects on human populations. Hills and Goda [1993] and Collins et al. [2005] both acknowledge and present a list of seven such impact effects. The five are thermal radiation, cratering, seismic shaking, ejecta deposition, and tsunami.
Learn more about Meteorite impact: https://brainly.com/question/9929282
#SPJ4
how does banking system help in economics development
Fjords found along the coasts of norway, new zealand, and alaska were formed by ______.
Fjords found along the coasts of Norway, New Zealand, and Alaska were formed by glacial scouring.
Long, deep, and narrow bodies of water that extend far inland are known as fjords. Fjords are frequently located in valleys that are U-shaped and have steep granite walls on either side. Most countries with fjords are Norway, Chile, New Zealand, Canada, Greenland, and Alaska in the United States.
In areas where past or present glacial extended below the present sea level, fjords can be discovered. A fjord is created when a glacier retreats, leaving behind a classic U-shaped valley that is then filled with water by the sea.
Learn more about fjords here
https://brainly.com/question/16354539
#SPJ4
If you are planning a vacation to the beach and find out that the town has prevailing winds coming from the ocean. What is the weather likely to be
If during the plans that you are making , the prevailing wind is damp and it is cold, then there is the possibility that the weather is going to be damp and cold.
Why would the weather be damp and cold?This is due to the weather that is being experienced in the particular area. Weather can be defined as the atmospheric condition of a person over a period of time.
The weather of a place could be cold and damp when the wind that is coming from the ocean happens to be the same way.
Read more on ocean wind here: https://brainly.com/question/758053
#SPJ1
What did kepler discover about the periods of planets and their distances from the sun?.
What is a popular theory for the difference in atmospheres of the jovian planets versus terrestrial planets?
High temperatures and solar wind in the inner planets allowed most of the volatiles to be driven off the terrestrial planets, but not the Jovian planets.
Terrestrial planets have higher density than Jovian planets.Jovian planets are mostly gas and liquid, terrestrial planets are solid and rocky.Jovian planets are almost gaseous and they are larger than terrestrial planets.
Planetary theory is a theory about the formation of planets. According to the planetary system hypothesis, when a planetary system forms, there will be a protoplanetary disk with material from the nebula from which the planetary system originates. This material is gradually assembled by gravity to form small pieces.
To know more about jovian planets:
https://brainly.com/question/13105744
#SPJ4
Wanda is responsible for a series of seismic sensors placed at remote locations. These sensors have low-bandwidth connections and she would like to place computing power on the sensors to allow them to preprocess data before it is sent back to the cloud. What term best describes this approach
The EDGE COMPUTING approach is used when seismic sensors are placed at remote locations to allow them to preprocess data before it is sent back to the cloud.
What is an EDGE COMPUTING?This refers to a type of distributed computing framework that brings enterprise applications closer to data sources such as IoT devices or local edge servers.
The idea of this computing resolves around its proximity to data at its source can deliver strong business benefits to allow faster insights, improved response times and better bandwidth availability.
Hence, the EDGE COMPUTING approach is used when seismic sensors are placed at remote locations to allow them to preprocess data before it is sent back to the cloud.
Read more about EDGE COMPUTING
brainly.com/question/23858023
#SPJ1
Occluded fronts characterize the beginning stages of a middle latitude cyclone.
a. true
b. false
It is a false statement that an occluded fronts is characterized as the beginning stages of a middle latitude cyclone.
What is a middle latitude cyclone?It refers to the synoptic scale low pressure system that has cyclonic flow that is found in the middle latitudes in a counter-clockwise form in northern hemisphere.
Most time, what occurs during the occluded front phase of a middle latitude cyclone is that there is a dryness and coolness of the air that causing a dissipation of the system.
Therefore, It is a false statement that an occluded fronts is characterized as the beginning stages of a middle latitude cyclone.
Read more about latitude cyclone
brainly.com/question/2215965
#SPJ1
The reaction of automobile exhaust and ultraviolet light produces?
Answer:
photchemical smog
hope this helps
Which factors led to the Dust Bowl of the 1930s?
MULTIPLE CHOICE!!!
fertilizer runoff
volcanic eruption
earth tremors
clearing of grasslands
erosion
overgrazing
Answer:
Explanation:
The Dust Bowl of the 1930s was caused by erosion, overgrazing, fertilizer runoff & the clearing of grasslands.
Write a paragraph about about it’s kind of about is kind of use in the settlement for example industry
Land usage is the use that humans make of the land that is at their disposal.
What are the uses of land?Residential: This kind of land use is primarily intended for homes, whether they are single- or multi-family structures. It also covers the various types of density and dwellings that can be built,l.
Commercial: Structures like warehouses, retail centers, stores, restaurants, and office buildings fall under the category of commercial land use.
Industrial: Depending on the nature of the industry, numerous forms of industrial land use exist. Industrial zones permit the establishment of factories, warehouses, and shipping facilities by companies in the light, medium, and heavy industries. There may, however, be environmental laws that must be complied with.
Agricultural: The safeguarding of land parcels from non-agricultural usage is the subject of agricultural zoning. Laws regulate the number of non-farm residences, the size of properties, and the kind of activities that are permitted in these zones.
Recreational: In this category, the land is used to build sports stadiums, swimming pools, golf courses, playgrounds, open spaces, and parks.
Public use: Under this sort of land use, social infrastructure, such as educational institutions and healthcare facilities, is created.
Infrastructure development: The land is used to build highways, streets, metro stations, railroads, and airports, among other types of infrastructure.
Learn more about land use on:
https://brainly.com/question/26096989
#SPJ1
please help me with this
Given is the Euro-Asia outline map.
Countries by no. on the map:
1.Turkey 2.Israel 3.Lebanon 4.Jordan 5.Saudi Arabia 6.Kuwait 7.UAE 8.Qatar 9.Yemen 10.Oman 11.Syria 12.Iraq 13.Not in the map 14.Not in the map 15.Turkmenistan 16.Uzbekistan 17.Kazakhstan 18.Russia 19.Kyrgyzstan 20.Tajakistan 21.Afghanistan 22.Iran 23.Bahrain 24.Pakistan 25.India 26.Maldives 27.Sri lanka 28.Nepal 29.Bhutan 30.Bangladesh 31.Burma 32.China 33.Mongolia 34.North Korea 35.South Korea 36.Japan 37.Taiwan 38.Philippines 39.Vietnam 40.Cambodia 41.Laos 42.Thailand 43.Malasiya 44.Singapore 45.Indonesia 46.Brunei 47.Timor
Know more about maps here:
https://brainly.com/question/19130581
#SPJ1
Cross pollination with media of insect is called
Cross pollination with media of insect is called Entomophily.
Hope it helps !_____________________________________________
Delicate frostlike accumulations of ice form as supercooled cloud or fog droplets encounter objects and freeze on contact. what do we call this type of precipitation?
Delicate frostlike accumulations of ice form as supercooled cloud or fog droplets encounter objects and freeze on contact. This type of precipitation is called rime.
Rimes are deposit of ice crystals that forms on objects at temperatures below freezing. Frost occurs when super-cooled water droplets in fog come into contact with surfaces that are below freezing. The droplets are so small that they freeze as soon as they touch an object. Rime is common on the windward slopes of super-cooled, cloud-covered mountains.
It consists of small ice particles with air pockets between them. This structure results in the typical white appearance and granular structure. Due to the rapid freezing of individual super-cooled droplets, the cohesive forces between adjacent ice particles are relatively low and the deposits can be easily shattered or removed from the object on which they are formed.
Know more about rime here
https://brainly.com/question/9365227
#SPJ4
If dr. taylor's stroke involved a blood clot in a similar location in her right hemisphere instead of her left hemisphere?
If dr. taylor's stroke involved a blood clot in a similar location in her right hemisphere instead of her left hemisphere leads to ischemic stroke.
The two hemispheres are connected by a thick band of nerve fibers called the corpus callosum. The halves of the brain can communicate with each other through this "bridge". The dura mater of the brain and the dura mater of the spinal cord are identical. The sclera of the brain is thinner. The sclera of the brain is made up of two distinct layers.
The sclera of the brain is made up of two distinct layers. The cerebral cortex is the "executive unit" of the nervous system, the home of our conscious mind. It allows us to become aware of ourselves and our feelings, communicate, remember, understand, and initiate voluntary movements.
To know more about hemisphere:
https://brainly.com/question/9223949
#SPJ4
The majority of the more than 3,800 minerals are silicates. group of answer choices true false
The majority of the more than 3,800 minerals are silicates. This statement is True.
Silicates are minerals that are composed of silicon and oxygen. Silicates are the largest, most fascinating, and most complex class of minerals. Silicates make up about 95% of the Earth's crust and upper mantle, are major constituents of most igneous rocks, and are found in significant amounts in sedimentary and metamorphic layers. They are also important components of lunar samples, meteorites, and most asteroids. In addition, planetary research have demonstrated their presence on the surfaces of Mercury, Venus and Mars.
Know more about silicates here
https://brainly.com/question/13432339
#SPJ4
In order to keep up with the tidal force of the moon, the tidal bulge waveform moves across earth's oceans at a speed of about 1,600 ________ per hour.
In order to keep up with the tidal force of the moon, the tidal bulge waveform moves across earth's oceans at a speed of about 1,600 KM per hour.
The tidal bulge waveform is the distortion of water and Earth that we call a tidal bulge is a result of deformation of earth and water materials at different places on Earth and response to the combined gravitational effect of Moon and sun. It is two ocean bulges created on opposite sides of Earth due to the moon's gravitational pull and the ocean's resistance to the pull.
High and low tides are caused by the Moon. The Moon's gravitational pull generates something called the tidal force. The tidal force causes Earth—and its water—to bulge out on the side closest to the Moon and the side farthest from the Moon. These bulges of water are high tides.
Learn more about tidal bulge:
https://brainly.com/question/7139451
#SPJ4
Because lenses act like a prism to separate the colors of the spectrum, they produce a troublesome effect known as ________.
Because lenses act like a prism to separate the colours of the spectrum, they produce a troublesome effect known as Chromatic abberation.
Chromatic aberration (CA), also known as chromatic distortion and spherochromatism in optics, is when a lens fails to bring all colours into focus at the same location. It results from dispersion because the lens elements' refractive indices change depending on the light's wavelength.
Most transparent materials lose refractive index as wavelength increases. Because a lens's refractive index determines its focal length, variations in that index have an impact on focusing. Chromatic aberration appears as colour "fringes" along the lines dividing the dark and light areas of the image.
Learn more about Chromatic aberration here:
https://brainly.com/question/13089079
#SPJ4
Which is most likely to produce mafic lava?
a. Island arc
b. Continental arc
c. Could be either
The air masses that have the greatest influence on weather conditions in the central united states are ________.
The air masses that have the greatest influence on weather conditions in the central United States are :- "cP and mT"
"cP and mT"
The air masses in and around North America include the continental arctic (cA), maritime polar (mP), maritime tropical (mT), continental tropical (cT), and continental polar (cP) air masses.Influence of air masses on temperature at a place.The position of a place in relation to the air mass's source and the air mass's trajectory as it departs from that region determine the impact that air masses have on a place's temperature. For instance, one's climate will be very consistent throughout the year if they are situated in the center of an air mass source region. You would be in the center of the continental polar air mass if you lived in north central Canada (cP). For the most of the year, you can anticipate chilly to frigid temperatures and low humidity levels.However, if you live in central Illinois, you will experience a much greater variation in temperature because you are in the boundary zone between several different air masses. Two air masses in particular influence this region, cP and mT. The cP air brings cool, dry weather while mT air is responsible for humid and warm conditions. When these air masses collide, storms are generated.To learn more about Air Masses, click the links.
https://brainly.com/question/19626802
#SPJ4
What does Steel mean by “sitopia”?
Explanation:
in sitopia steel mean if we can eat well we are on the way to living
Assume that you need to determine the rate at which infiltration occurs in an area. what are the variables you must consider before you can formulate an answer?
The variables that must be considered for formulating the rate at which infiltration occurs in an area are hydraulic conductivity, percolation, net-rainfall, soil type and flow.
Infiltration is the flow of water below the soil surface under gravity action and pressure effects.
The following are the variables-
1. Hydraulic conductivity- It is the limiting value of infiltration when the soil is saturated and homogeneous.
2. Percolation- The vertical water flow under the influence of gravity.
3. Net-rainfall- Amount of rain that falls on the ground. It is also called Production factor.
The others factors include soil type, soil coverage, topography, flow supply, soil compaction and soil humidity.
To learn more about Infiltration here
https://brainly.com/question/13544596
#SPJ4
In order to increase renewable energy Multiple Choice the sources of energy for an area will need to be more diverse. most communities will have to be redesigned to be off the grid. every community will have to invest in solar energy. every community will have to invest in wind energy.
In order to increase renewable energy, most communities will have to be redesigned to be off the grid.
The answer is option B.
As the world dynamics related to renewable energy is converting, there is an improved shift from fossil fuels to renewable strength as more international locations are capitalizing on the benefits and electricity capability renewables have and both growing and advanced international locations are investing greater in renewable strength.
Renewables made up almost 20 percent of the application-scale U.S. energy era in 2020, with the bulk coming from hydropower (7.three percent) and wind strength (8.4 percent). Solar technology (inclusive of distribution), which made up 3.3 percent of total U.S. technology in 2020, is the fastest-developing electricity source.
Learn more about renewable energy here: https://brainly.com/question/79953
#SPJ1
Identify each country or body of water. israelegyptiraniraqsaudi arabiakuwaitturkeypersian gulfmediterranean seaarabian sea
Answer:
look at the picture
Explanation:
I WAS RIGHT
How would an object in earth's atmosphere be deflected as a result of earth's rotation?
Answer:
to the right in the Northern Hemisphere, and to the left in the Southern Hemisphere
What was the most desired commodity in long-distance trade?
a. silk
b. spices
c. ivory
d. gold
Silk was the most desired commodity in long-distance trade
What is Silk?Silk is a natural protein fabric that may be woven into textiles in some forms. Silk is a protein fiber consisting primarily of fibroin that is produced by certain insect larvae to construct cocoons. The most well-known silk is made from the cocoons of captive-reared mulberry silkworm larvae Bombyx mori.
Silk manufacturing began in China during the Neolithic period (Yangshao culture, 4th millennium BC). Silk remained restricted to China until the Silk Road was established sometime around the second millennium BC. For another thousand years, China maintained a virtual monopoly on silk production.
Silk fabric was invented in Ancient China and has since played an important role in their culture and economy.
To learn more about Silk from the given link:
https://brainly.com/question/24869354
#SPJ4