Why do the planets in our solar system orbit in approximately the same plane around the sun?

The piece of plastic has   1.256× 10¹³  protons  more than  that of electrons.

A proton is a subatomic particle with a defined mass of 1 and a charge of +1 (positive charge). The symbol for the proton is either p or p+.

An electron is a subatomic particle that has a negative electric charge and that actively orbits the nucleus of the atom .

To calculate ,

given ,

magnitude of charge , q=+2μC=+2×10⁻⁶

Since, protons carry positive charge. Then, we know that standard number of proton in 1 Coulomb of charge is,

1C=6.28×10¹⁸ protons

Number of protons in 1 microcoulomb charge is,

=6.28×10¹⁸×10⁻⁶

=6.28×10¹²

Then for the net charge of q, the number of protons is given as,

np= q×6.28×10¹²

np= 2×6.28×10¹²

np=1.256×10¹³ protons

Thus, the piece of plastic has 1.256×10¹³   more protons than electrons.

Lear more about electron and proton ,here:

https://brainly.com/question/1421805

#SPJ1

The pH of a 0.50 M solution of base B is found to be 10.19. The Kb of the base is 4.8 × 10⁻⁸.

Let's consider the following basic reaction.

B(aq) + H2O(l) ⇄ BH(aq) + OH⁻(aq)

First, we will calculate the pOH of the solution using the following expression. (14-10.19)=3.81

antilog -3.81=1.55×10^-4/0.50=4.8×10^-8

The pH of a 0.50 M solution of base B is found to be 10.19. The Kb of the base is 4.8 × 10⁻⁸.

Learn more about  Kb for this base here brainly.com/question/6465134

#4262

The [tex]K_b[/tex] of the base b is 4.805 × 10⁻⁸.

The dissociation constant is a type of equilibrium constant that measures the degree of dissociation of a salt.

[tex]K_a[/tex] is the dissociation constant for the acid which describes the strength of an acid.

[tex]K_b[/tex] is the dissociation constant of the base which describes the strength of a base.

pOH = 14 - pH = 14 - 10.19 = 3.81

pOH = -log[OH⁻]

3.81 = -log[OH⁻]

Antilog (-3.81) = [OH⁻]

[OH⁻] = 1.55 × 10⁻⁴

Here,

[tex]K_b= \frac{[BH^+][OH^-]}{[B]}[/tex]

     = [tex]\frac{(1.55\times10^{-4})(1.55\times10^{-4})}{0.50}[/tex]

     = 4.805 × 10⁻⁸

The Kb of the base b is 4.805 × 10⁻⁸

Learn more about dissociation constant:

https://brainly.com/question/9560811

#SPJ4

The significant figures will be 1.

As, weight of acetylsalicylic acid = 0. 4 g

We obtain 400 mg when we convert 0.4g of acetylsalicylic acid to mg.

So, 400 milligrams are worth 0.4 grams when converted to grams.

There is just one significant figure because 0 before a decimal is not significant i.e. 4.

The digits of a number that have relevance in relation to the measurement's resolution are known as significant figures. Additionally known as significant figures in chemistry. All experimental measurements are subject to some degree of uncertainity.

Check more such questions based on significant figure here:

brainly.com/question/24491627

#SPJ4

Answer:

5.12 atm

Explanation:

Before you can use the Ideal Gas Law to find the pressure, you need to convert grams to moles (via molar mass).

Molar Mass (H₂): 2(1.008 g/mol)

Molar Mass (H₂): 2.016 g/mol

 1.8 grams H₂               1 mole
----------------------  x  ----------------------  =  0.893 moles H₂
                                 2.016 grams

The Ideal Gas Law equation looks like this:

PV = nRT

In this equation,

-----> P = pressure (atm)

-----> V = volume (L)

-----> n = moles

-----> R = Ideal Gas Constant (0.0821 L*atm/mol*K)

-----> T = temperature (K)

After converting Celsius to Kelvin, you can plug the given values into the equation and simplify to find the pressure.

P = ? atm                                R = 0.0821 L*atm/mol*K

V = 4.3 L                                T = 27 °C + 273.15 = 300.15 K

n = 0.893 moles

PV = nRT

P(4.3 L) = (0.893 moles)(0.0821 L*atm/mol*K)(300.15 K)

P(4.3 L) = 22.0021

P = 5.12 atm

**Based on my past experiences, I believe the constant (R) you provided may have been mistyped. Instead of 0.821, I used 0.0821.**

Ester is the major product formed in the reaction involving an acid anhydride dissolved in alcohol.

Learn more about acid anhydride here:

https://brainly.com/question/3678985

#SPJ4

Answer:

The longest continuous chain

Explanation:

(a) The temperature goes up by 3⁰C.

(b) There is increase in temperature, so the reaction is exothermic.

(c) Examples of exothermic reaction include, rusting of Iron, burning of coal, reaction of strong acid and water.

(d) Examples of endothermic reaction include, melting solid salts and evaporating liquid water.

Exothermic reaction is a type of chemical reaction in which energy is transferred to or from the surroundings.

Examples of exothermic reactions include the following;

Endothermic reaction is a type of chemical reaction in which energy is absorbed from the surroundings.

Examples of endothermic reactions include the following;

From the increase in temperature from 15⁰C to 23⁰C, we can conclude that the temperature goes up by 3⁰C.

20⁰C - 17⁰C = 23⁰ - 20⁰C = 3⁰C.

Since there is increase in temperature, the reaction is exothermic.

Learn more about exothermic reaction here: https://brainly.com/question/2924714

#SPJ1

As the temperature increases, the speed of gas molecules increases

The kinetic theory state about the relationship between the speed and temperature of gas molecules as with an increase in temperature, the speed of gas molecules increases.

The energy that an object possesses as a result of its motion is known as kinetic energy.

The average of the kinetic energies of all the particles in a system is known as the average kinetic energy.

The following equation provides the answer:

K = [tex]\frac{3RT}{2}[/tex]

K= kinetic energy

R= gas constant

T= temperature

The kinetic theory of matter states that all matter is made of small particles that are in random motion and that have space between them.

To learn more about kinetic theory visit:

https://brainly.com/question/14349214

#SPJ4

The molarity of a solution in which 55. 49 g of calcium chloride is dissolved in enough water to make 500. ml of solution is 1M.

It is defined as number of moles of solute divided by volume of solution.

Given,

Mass of CaCl2 =55.49g

Molar mass of CaCl2 =40+35+35=110g

Mole= given mass/ molar mass

= 55.49/110=0.50mol.

Now, putting all values we get the molarity

Molarity =0.5×1000/500=1M

Thus, the molarity of given solution is 1M.

learn more about Molarity:

https://brainly.com/question/26921570

#SPJ4

The only way increase the buffer capacity is to increase the total concentration of the system (conjugated acid + base).

The buffer capacity can be defined as the amount of strong base needed to change the pH of 1 liter of solution by 1 pH unit.

To increase buffer capacity to modify buffer solution-

The buffer capacity of a buffer, consisting of a weak acid and its conjugated base is given by the following equation:

π=㏑ 10 [{H⁺} + K ÷ H⁺ + CKα [H⁺]  ÷ [H⁺]  + Kα]

With [H^+] the concentration of the H^+ ion ; C the total buffer concentration (i.e. acid + conjugated base) and Kα the acidity constant.

It is clear from this equation that the buffer capacity is directly proportional to the concentration.

So the only way increase the buffer capacity is to increase the total concentration of the system (conjugated acid + base).

Learn more about buffer capacity , here:

https://brainly.com/question/22904821

#SPJ4

The equilibrium constant, Keq for the reaction, given the data from the question is 0.084

The equilibrium constant, Keq for a reaction is the ratio of the concentration of the products raised to their coefficients to the ratio of the concentration of the reactants raised to their coefficients. For example, the equilibrium constant for the reaction nA + mB <=> eC can be obtained as follow

Keq = [C]^e / [A]^n × [B]^m

The equilibrium constant, Keq for the above reaction can be obtained as illustrated below:

Keq = [SO₂]^2 × [O₂] / [SO₃]^2

Keq = (0.17)^2 × (0.701) / (0.491)^2

Keq = 0.084

Thus, the equilibrium constant, Keq for the reaction is 0.084

Learn more about equilibrium constant:

https://brainly.com/question/17960050

#SPJ1

The mass of CH₄ that is consumed is 10.598 g.

The enthalpy of a system is defined as the sum of the internal energy of a system and the energy that is produced due to its pressure and volume.

It is given by

H = U+PV

The following reaction takes place during the combustion of CH₄

[tex]CH_4(g)+2O_2(g)\rightarrow CO_2(g)+2H_2O(g)[/tex]

Energy evolved during the combustion, E = 587.9 kJ

Enthalpy of combustion of methane, ∆H = 890.3 kJ

[tex]No of moles of CH_4 =\frac{energy evolved}{enthalpy of combustion}[/tex]

= 587.9 /890

Mass of CH₄  that is consumed = no of moles × molar mass of CH₄

  = 587.9 /890 × 16

   = 10.598 g

The mass of CH₄  which is consumed is 10.598 g

Learn more about enthalpy:

https://brainly.com/question/14047927

#SPJ4

Answer:

Thiols contain stronger acids than alcohols

Explanation:

Answer:

Sulfur is a bigger atom than oxygen and has a lower electgronegativity value. Therefore, the lone pair availability in thiol is higher than alcohol

Explanation:

When an allergen binds with IgE antibodies on mast cells, resulting in release of chemical mediators, this reaction is called Type I reactions.

The Type I reactions is also known as immediate hypersensitivity reaction.

This reaction involve immunoglobulin E ( IgE ) - mediated release of histamine and other mediators from mast cells and basophils .

Examples : anaphylaxis and allergic rhinoconjunctivitis.

The IgE molecules bind to high - affinity receptors on the surface of mast cells and basophils and the subsequently cross-linking of these molecules with the allergen releases performed and newly synthesized mediators.

To learn more about allergen

https://brainly.com/question/15418108

#SPJ4

There are  0.94 g mass of [tex]CaCO_{3}[/tex] is required to react completely with 25. 0 ml of 0. 750 m HCl .

Calculation ,

Mass of [tex]CaCO_{3}[/tex] = ?

The 1000ml of HCl  = 27.375 g

then the 1 ml of solution contains HCl = 27.375 g/1000×1

25 ml  of solution contains HCl = 27.375 g/1000 × 25 = 0.684 g

The chemical equation can be given as :

[tex]CaCO_{3} +HCl[/tex]  → [tex]CaCl_{2} +CO_{2} +H_{2} O[/tex]

2 mol of HCl reacts with 1 mol of [tex]CaCO_{3}[/tex]

The amount of [tex]CaCO_{3}[/tex] reacted is given by ,

100/71 × 0.684 g = 0.9639 g = 0.94 g

To Learn more about mass of calcium carbonate

https://brainly.com/question/13565765

#SPJ4

Half-life is the time taken for the concentration of the substance to reduce by 50%. The original sample of strontium had a mass of 1.6 gms. Thus, option d is correct.

The half-life of any radioactive substance is the time period at which the concentration will get reduced to half the initial amount. The initial mass of Sr-90 is calculated as,

[tex]N(t) = N_{0} (\dfrac{1}{2})^{ \frac{t }{t 1/2}}[/tex]

Given,

Quantity of the remaining substance N (t) = 0.40 gm

Initial radioactive substance quantity [tex]N_{0}[/tex] =?

Time duration (t) = 56 years

Half-life = 28 years

Substituting values above:

[tex]\begin{aligned} 0.40 &= N_{0} (\dfrac{1}{2}) ^{{\frac{56}{28}}\\\\0.40 &= N_{0} (\dfrac{1}{2})^{2}\end{aligned}[/tex]

= 1.6 gm

Therefore, option d. the initial mass of Sr is 1.6 gm.

Learn more about half-life here:

https://brainly.com/question/16145921

#SPJ4

We do not perform the titration while the sample is at its original temperature because reaction is too slow at original temperature and requires high activation energy.

A titration is a method where the concentration of an unknown solution is ascertained by comparing it to a solution of known concentration. The analyte (the unknown solution) is typically added in a known amount to the titrant (the known solution) from a buret until the reaction is finished.

The slow energy step in the reaction process may require a high activation energy, and the proportion of activated molecules needed to reach this reaction at room temperature or original temperature is too low, so most molecules cannot cross this peak. As a result, the reaction at room temperature proceeds very slowly (the final product is not reached). Heat can enhance the proportion of active molecules and catalyse a larger-scale reaction.

Learn more about room temperature here;

https://brainly.com/question/1747376

#SPJ4

When mixture of H2PO4- and OH- is allowed to react. The products of the reaction are as follow

H2PO4+ OH--------HPO4(2-)+H2O

In the reaction above H2PO4(2-) is donating the proton to OH Resulting in H2O and the deprotonated species. This makes it a bronsted lowry acid.

According to Bronsted lowry, acid are those which donate proton.

In the given problem, H2PO4- is bronsted lowry acid. So it donate electron to OH- to form water.

Thus, the product formed in the given reaction is water and H2PO4(2-).

learn more about bronsted lowry:

https://brainly.com/question/14407412

#SPJ4

Answer:

2 NaI ---> 2 Na + I₂

Explanation:

The only way the reactant NaI can decompose is by separating into 2 atoms, Na and I. However, you must take into account that iodine (I) exists as a diatomic molecule.

An equation is balanced when there is an equal amount of each element on both sides of the reaction. These amounts can be modified by adding coefficients in from of the molecules/atoms.

The unbalanced equation:

NaI -----> Na + I₂

Reactants: 1 sodium, 1 iodine

Products: 1 sodium, 2 iodine

The balanced equation:

2 NaI ---> 2 Na + I₂

Reactants: 2 sodium, 2 iodine

Products: 2 sodium, 2 iodine

The properties of all metals are "good conductors of heat and electricity".

Metals are excellent heat or electricity conductors and were malleable, ductile materials that may be pulled into wire and pounded into sheets. Apart from mercury, which appears a liquid at ambient temperature, most metals have solids with a distinctive silvery shine.

Due to the metals' atoms' ability to create a matrix across which outside electrons could easily travel, metals make good electrical and thermal conductors. The positive nuclei of the connecting metal ions are surrounded by a sea of electrons rather than orbiting their individual atoms.

Therefore, the properties of all metals are "good conductors of heat and electricity".

To know more about metals

https://brainly.com/question/18153051

#SPJ4

The metabolic process that takes place in an organism's cells is called cellular respiration. Both photosynthesis and cellular respiration contribute carbon dioxide to the biogeochemical cycle.

What is biogeochemical cycle?

The mechanism that distributes and circulates abiotic chemical elements among the various realms of the planet is known as the biogeochemical cycle. The carbon, water, nitrogen, phosphorus cycle, etc. are all included.

Carbon dioxide is released during cellular respiration as a waste gas into the atmosphere, where it is then taken by plants to produce energy, which is then utilized by the organism, which then releases more carbon dioxide. The ecological chain's carbon cycle continues from the producer to the consumer.

Therefore, the carbon cycle is influenced by photosynthesis and cellular respiration.

Learn more about the biogeochemical cycle here:

https://brainly.com/question/27786512

#SPJ4

The correct answer is nitrates.

The chemical formula for nitrate is [tex]NO_{3}[/tex]. Nitrate is a polyatomic ion. Nitrates are the name for salts that contain this ion. Common nitrate ingredients in explosives and fertilizers. Water is a solvent for almost all inorganic nitrates. Bismuth oxynitrate is one type of insoluble nitrate. Tests of endurance exercise performance show that dietary nitrate supplementation is effective. When young, healthy people consume significant amounts of nitrate, whether in the form of pure sodium nitrate or beet juice, their plasma nitrate concentration is quickly increased by a factor of 2 to 3, and this elevated nitrate concentration can be sustained for at least two weeks. Nitric oxide, or NO, is produced in response to elevated plasma nitrate.

Metal nitrates other than the alkali elements on heating decompose into the corresponding metal __ along with the evolution of nitrogen peroxide and oxygen.

Learn more about nitrates here:

https://brainly.com/question/12768349

#SPJ1

Acidosis is a disorder in which there is excess acid in the body. This condition can lead to hyperkalemia due to the diffusion of hydrogen ions in the intracellular fluid.

Hyperkalemia is an increased concentration of the fluid potassium level than normal. Though potassium (K) is needed by the body for various functions of the nervous system and muscles their excess can lead to diseases.

It can also be caused by acidosis, where the concentration of the hydrogen ion increases in the intracellular fluid which leads to a large movement of potassium ions toward the extracellular fluid.

Therefore, the condition of acidosis can cause hyperkalemia.

Learn more about hyperkalemia here:

https://brainly.com/question/8920601

#SPJ4

Answer:

Explanation:

The final answer has a different set of units. In particular, kilograms (kg) changes to grams (g) and meters (m) changes to centimeters (cm). To make this change, you need to multiply the first value by proportions.

When writing these proportions, it is important that they are arranged in a way that allows for the cancellation of units. For instance, since both kg and m are located in the numerator, they must be located in the denominators of the conversions.

Proportions:

1 kg = 1,000 g

1 m = 100 cm

The full expression:

As you can see, the old units cancel out and you are left with g and cm in the numerator.

Ethylene glycol has a specific heat of 0. 578 cal/(g°c). If 23.2 g of ethylene glycol absorbs 75.6 cal of heat energy. The temperature increase be 5.64°C.

The amount of heat needed to raise the temperature of 1 kg of substance.

It is expressed as

Q = mcΔT

where,

Q = Heat energy

m = Mass

c = Specific heat capacity

ΔT = Change in temperature.

Here,

Q = 75.6 cal

m = 23.3 g

c = 578  cal/(g°c)

Now put the values in above formula we get

Q = mcΔT

75.6 cal = 23.2 g ×  578  cal/(g°c) × ΔT

ΔT = 5.64°C

Thus from the above conclusion we can say that Ethylene glycol has a specific heat of 0. 578 cal/(g°c). If 23.2 g of ethylene glycol absorbs 75.6 cal of heat energy. The temperature increase be 5.64°C.

Learn more about the Specific Heat here: https://brainly.com/question/13439286

#SPJ4

As a result, the dry gas volume at STP is 45.58 cm 3.

Water vapor is present in the gas. Since H2 is created during the reaction and water vapor is irrelevant when determining the equivalent weight, we only need the dry gas. As a result, the volume of H2 gas can be calculated using the ideal gas law.

P 1 = 750 mm Hg, 14 mm Hg, 736 mm Hg V = 50 cm 3 T = 17 0 C = 290 K

P = 760mmHg, V =?cm3, T = 0 0 and C = 273K.

The Gas equation follows.

P 1V 1/ T1 = P 2V 2/ T2

290/73650 = 273/760V 2

= 290760V 2

= 7365027V 2 = 45.58 cm

As a result, the dry gas volume at STP is 45.58 cm 3.

Learn more about Volume here-

https://brainly.com/question/1578538

#SPJ1

The seasonal shifts of Earth's planetary wind and moisture belts are due to changes in the latitude that receives the sun's vertical rays.

The latitude refers to the specific geographic coordinates at some point of the Earth in relation to the Equator line.

Latitude and longitude are geographic coordinates that allow to localize a specific point in the world by using the center of the Earth's planet as point of origin.

The amount of sun rays received by a given latitude largely depends on the season since the Earth's planet has a light inclination that alter this amount of radiation.

In conclusion, the seasonal shifts are due to changes in the latitude that receives the sun's vertical rays.

Learn more about the latitude and radiation here:

https://brainly.com/question/3005929

#SPJ1

Organometallic Chemical reaction is a Grignard reaction. The critical intermediate (which can be isolated and enables the final product) is the formation of a carbon bond.

The Grignard Reaction is an organometallic chemical reaction that mostly produces C-C bonds. When organic molecules are combined with the Grignard reagent, the Grignard reaction occurs (Rmgx).

The Grignard Reaction is the conversion of an aldehyde or ketone into secondary or tertiary alcohol by the addition of an organomagnesium halide (Grignard reagent). A primary alcohol is produced when formaldehyde and oxygen react.

Alcohol and water molecules have acidic hydrogen atoms that Grignard reagents quickly react with. A proton substitutes the halogen in a Grignard reaction with water, producing an alkane as the end result. Therefore, the Grignard reagent offers a two-step process for changing a haloalkane into an alkane.

To learn more about Grignard's reaction please visit -
https://brainly.com/question/17135014
#SPJ4