If your engine is flooded with gasoline, you should push the accelerator to the floor and hold for:_______.

If we increase the length of the resistor, resistance will also increase and vice-versa.

It is given that in a wire simulation, we have to adjust only the length of the resistor.

It required to find the effect on resistor when adjust only the length of the resistor.

As we know that the length is directly proportional to the resistance of the wire that means is we increase the size or length of the wire then it also increase the resistance present in the wire. On the other hand if we decrease the length of the wire, it will decrease the resistance. This can be represented as:

Resistance = resistivity × length/area

This is also because there is more collision of the flowing electrons in the wire to the metal ions present there.

Thus if we increase the length of the resistor, resistance will also increase and vice-versa.

Learn more about the resistance here:

https://brainly.com/question/11431009

#SPJ4

The maximum height reached by the ball is 0.46m.

To find the answer, we have to know about the potential energy of a spring mass system.

                       [tex]k=400N/m\\m=1kg\\x=0.150m\\h=?\\[/tex]

                             [tex]U=\frac{1}{2}kx^2 \\U=mgh[/tex]

                    [tex]h=\frac{kx^2}{2mg} =\frac{400*(0.15)^2}{2*1*9.8} =0.46m[/tex]

Thus, we can conclude that, the maximum height reached by the ball is 0.46m.

Learn more about the potential energy here:

https://brainly.com/question/26962934

#SPJ4

The amount of work done by the gravitational field of the earth do on the rock is 29.4 d (J).

Work is done when energy is transferred from one store to another.

Work is also done when a force causes an object to move.

The amount of work done by the gravitational field of the earth do on the rock is calculated as follows;

W = Fd

where;

W = (mg)d

W = (3 x 9.8)d

W = 29.4 d

Thus, the amount of work done by the gravitational field of the earth do on the rock is 29.4 d (J).

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Answer:13,3 m/s

Explanation:We can use the Torricelli equation:

v^2=v0^2+2ah

the initial velocity is 0

v0^2=0

so:

v^2=0+2*9,8*9

v^2=176,4

v=13,3 (approx)

Answer:

For me i think the answer will be 13.72m/s

The pressure of nitrogen which is needed to maintain a N2 concentration of 0. 53 m is 3.2 × 10^(4).

It is defined as the continuous physical force applied on or against an object by something which is in contact with it.

It is also defined as the force per unit area.

The henry law constant is thr ratio of the partial pressure of compound in air to the concentration of compound in water at given temperature.

C= kp

where,

C is the concentration of compound = 0.53m

k is the henry constant = 6. 2×10−4matm

p is the pressure of compound

By substituting all the value we get,

C = 6. 2×10−4 × p

0.53 = 6. 2×10−4 × p

p = 0.53/6. 2×10−4

p = 3.2 × 10^(4)

Thus we find that the pressure needed to maintain a N2 concentration of 0. 53 m is 3.2 × 10^(4).

learn more about Henry's law:

https://brainly.com/question/16222358

#SPJ4

The power expended is calculated as 91,100 W.

We know that the acceleration can be obtained by the use of the equation;

v = u + at

v = final velocity

u = initial velocity

t = time

a = acceleration

a= v - u/t

a =  27 - 0/ 5.2 = 5.2 m/s^2

Thus;

v^2 = u^2 + 2as

but u= 0 m/s

v^2 = 2as

s =  v^2/2a

s = (27)^2/2 * 5.2

s = 70 m

Now;

Work done =  1300 kg * 5.2 m/s^2 * 70 m = 473200 J

Power = 473200 J/5.2 seconds

Power =  91,100 W

Learn more about power expended:https://brainly.com/question/11579192

#SPJ1

The electric energy is 32 uj

The electric potential of a point charge is [tex]V=kQ/r[/tex], or [tex]V = k Q / r[/tex]. Electric potential is a scalar while the electric field is a vector. While the total electric field can be computed by adding individual fields as vectors, the voltage resulting from a collection of point charges can be calculated by adding voltages as integers.

It is decided to set the potential at infinity to zero. [tex]E=Fq=kQr^2[/tex], but V for a point charge reduces with distance while decreasing with distance squared. Remember that the electric field E is a vector, but the electric potential V is a scalar with no direction.

The electric energy is (8×4)=32 uj

Learn more about electric energy  herebrainly.com/question/24403138

#4219.

The electric potential at that point in space is 8 v is 32uj

what is electric potential energy?

Potential energy is the energy within an object relative to its position and proximity to other objects within a field.

The electric potential of a point charge is V=kQ/rV=kQ/r , or V = k Q / rV=kQ/r . Electric potential is a scalar while the electric field is a vector. While the total electric field can be computed by adding individual fields as vectors, the voltage resulting from a collection of point charges can be calculated by adding voltages as integers.

It is decided to set the potential at infinity to zero.

but V for a point charge reduces with distance while decreasing with distance squared. Remember that the electric field E is a vector, but the electric potential V is a scalar with no direction.

The electric energy is (8×4)=32 uj

learn more about electric potential from here: https//brainly.com/question/28167853

#SPJ4

A concave mirror is also referred to as a converging mirror and it can be defined as a type of mirror that is designed and developed with a reflective surface that is typically curved inward and away from the source of light.

Basically, one common use of a convex mirror include the following:

A convex mirror is also referred to as a diverging mirror and it can be defined as a type of mirror that is designed and developed with a reflective surface that typically bulges outward toward the source of light.

Basically, one common use of convex mirror is as rear-view mirrors in automobiles vehicles.

Read more on convex mirror here: https://brainly.com/question/24175067

#SPJ1

Answer:

If the light were incident upon two polarizers at right angles, no light would get thru - thus each polarizer must block 50% of the light.

One polarizer would allow 50% of the light to pass.

The electric field inside a metallic conductor that is in electrostatic equilibrium is zero.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field.

Since there are many electrons, there is also a strong force of repulsion between them. Therefore, the electrons travel to the conductor's surface to reduce the repulsion between them. Therefore, we can state that there is no net charge present inside the conductor.

So, The electric field inside a metallic conductor that is in electrostatic equilibrium is zero.

Learn more about conductors here:

https://brainly.com/question/14795050

#SPJ4

6 V drop occurs across the 6 ohm resistor in the parallel circuit diagram. The correct answer is C.

Since this parallel combination is connected with a cell, the potential difference through each resistor will be 6 volts. Now using I=V/R,

Current through 3 ohm resistor = 6/3 = 2 V

Current through 6 ohm resistor = 6/6 = 1 V

And the total current will be the sum of individual current in each resistor using Kirchoff’s junction law, Total current = 3 ampere

Since it is parallel combination the current passing across two resistors can differ but the voltage drop will remain the same.

To know more about resistance:

https://brainly.com/question/12381649

#SPJ1

Answer:

The force he will apply is 666.667 N

Explanation:

The impulse is given as the product of Force and time:

              Impulse (I) = F * t

As we are provided with the impulse and that is:

I = 100 ns and t = 0.15 s

So, required force is:

                 F = I/t

                 F = 100/0.15

                 F = 666.6667 N

Answer:

[tex] \boxed{\sf54 \: kobo}[/tex]

Explanation:

Energy = Power × Time

Energy = 900× 4 ×5 = 18000 wh

Energy = 18000 wh = 18 kwh

Cost of 1 unit electricity = 3 kobo

cost of 18 unit electricity= 18 × 3 = 54 kobo

Answer:

54 Kobo

Explanation:

Units of electricity are measured in kilowatt hours (kWh).

Given information:

Convert the wattage of the electric iron from watts to kilowatts.

1000 watts (W) = 1 kilowatt (kW)

⇒ 900 watts = 1 ÷ 1000 = 0.9 kilowatts

This means that the power consumption of the electric iron is 0.9 kW per hour of use.

Total hours spent pressing clothes:

= 4 hours per week for 5 weeks

= 4 × 5

= 20 hours

Total power consumption:

= number of kW × number of hours

= 0.9 × 20

= 18 kWh

To find the total cost, multiply the total kWh by the cost per kWh:

⇒ Cost = 18 × 3 = 54 Kobo

μk = 0.106 is the coefficient of kinetic friction between the box and the floor

When the box is moving across the flat surface with a constant velocity, the force applied to it must be equal to the kinetic frictional force applied to the object:

F = μk*W = μk*mg

Where,

F = Force applied on box = 52 N

m = mass of box = 50 kg

g = 9.8 m/s²

μk = coefficient of kinetic friction between box and floor

hence,

52 N  = μk(50 kg)(9.8 m/s²)

μk = (52 N)/(490 N)

μk = 0.106

Kinetic friction is the name for a force that exists between sliding parts. A force opposing a body's forward motion is applied to one that is moving on the surface. The kinetic friction coefficient between the two materials will determine the magnitude of the force.

To learn more about kinetic friction please visit -
https://brainly.com/question/19557684
#SPJ4

The near-point distance of the eye is 11 cm.

The near-point distance of the eye is the closest possible distance an object can be from the eye in order for its image to be formed on the retina. It can also be termed the closest distance of accommodation.

The near-point distance of the eye in the given scenario can be calculated using the lens formula given below:

1/f = 1/v + 1/u

where;

f = focal length

v = image distance

u = object distance

From the data provided;

f = 2.20 cm

v = 2.75 cm

u = ?

Solving for u:

1/u = 1/f - 1/v

1/u = 1/2.20 - 1/2.75

1/u = 0.91

u = 11 cm

In conclusion, the lens formula is used to determine the eye's near-point distance.

Learn more about eye's near-point distance at: https://brainly.com/question/16391605

#SPJ1

The frequency and the period are inversely proportional.

[tex]f=\dfrac{1}{T}[/tex] where T is the period

We're given:

Because the frequency and the period are reciprocals of each other, we can find the period of the sound by finding the reciprocal of the frequency:

[tex]T=\dfrac{1}{1000}[/tex]

[tex]T=\dfrac{1}{1000}[/tex]

The possible impact of the maunder minimum on earth is a) lower temperatures

The Maunder Minimum, also known as the "prolonged sunspot minimum", was a period around 1645 to 1715 during which sunspots became exceedingly rare. During a 28-year period (1672–1699) within the minimum, observations revealed fewer than 50 sunspots.

The most recent grand solar minimum occurred during Maunder Minimum (1645–1710), which led to reduction of solar irradiance by 0.22% from the modern one and a decrease of the average terrestrial temperature by 1.0–1.5°C

During the Maunder Minimum, the Sun emitted less strong ultraviolet light, and so less ozone formed. The decrease in ozone affected planetary waves, the giant wiggles in the jet stream that we are used to seeing on television weather reports

correct option is

a) lower temperatures

To learn more about Maunder Minimum here

https://brainly.com/question/9328449

#SPJ4

Two vectors have magnitudes of 10 and 15. The angle between them when they are drawn with their tails at the same point is 65. The component of the longer vector along the line of the shorter is 6.33 .

A vector is a quantity or phenomenon that has two independent properties: magnitude and direction. The term also denotes the mathematical or geometrical representation of such a quantity. Examples of vectors in nature are velocity, momentum, force, electromagnetic fields, and weight.

The taller component will be 15 . There will be two components taller component , one in the direction of shorter component and other perpendicular to the shorter wavelength .

The component of longer wavelength in the direction of shorter will be  

= 15 cos (theta ) = 15 cos (65) = 6.33

where theta  is the angle between both the vectors

To learn more about vectors here

https://brainly.com/question/13322477

#SPJ4

Answer:

Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. Ideally, the device preserves the input power and simply trades off forces against movement to obtain a desired amplification in the output force. The model for this is the law of the lever.”

Explanation:

a person can pull approximately 60% of their own weight horizontally along the ground in good conditions. So if we need a 500 lb pull to get something done and we have a single groundman who weighs 200 lb and can therefore generate around 120 lb of pull, how can we accomplish this 500 lb pull? The simple answer is that the groundman can go find 4 or 5 good friends who are willing to drop everything and come and help him pull on the rope.

Answer:

that's all I could do.hope it helps.

The work done by the unstretched spring is 5 J.

Hooke's law states that the extension of a given material is directly proportional to the force applied as log as the elastic limit is not exceeded. Thus we have to know that; F = Ke

F = force applied

K = force constant

e = extension

Using the graph;

K = F/e

F = 200N

e = 5 cm or 5 * 10^-2 m

K = 200N/ 5 * 10^-2 m

K = 4000 N/m

Now;

Work = 1/2Ke^2

Work = 0.5 *  4000 N/m * (5 * 10^-2 m)^2

Work = 5 J

Learn more about Hooke's law:https://brainly.com/question/13348278

#SPJ1

The mass of an object that experiences a gravitational force of 685 N near earth's surface where g = 9.80 m/s² is 98.89 kg.

Any two mass-containing objects are attracted to one another by the gravitational force. Because it consistently attempts to pull masses together rather than pushing them apart, the gravitational force is known as attractive.

In reality, everything in the cosmos is tugging on everything else, including you!

According to the question,

The gravitational force of 685 N near earth's surface.

The acceleration due to gravity is  g = 9.80 m/s².

The formula for force acting of the body under the influence of gravitation is ;

Force = mass×acceleration

Substitute the given values;

685 = m×9.8

m = 685/9.8

m = 69.89 kg.

Therefore, mass of an object is 69.89 kg.

To know more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

Rubbing water (isopropyl alcohol) has lesser surface tension than that water.

Water possesses a surface tension of 72 dynes/cm.

Whereas rubbing alcohol has a surface tension of 23 dynes/cm.

Surface tension is the propensity of liquid surfaces at rest to shrink to the smallest possible surface area.

Because the atoms on the outside of the molecules (often hydrogens) lack strong hydrogen bonding capabilities, most organic liquids have very low surface tensions. Because isopropanol contains just 28%, OH and the remainder is CH or CH3, the linkages that hold a droplet together are few and far between.

The only substance with a higher surface tension than water is liquid mercury (450 dyne/cm).

Learn more about surface tension here:

https://brainly.com/question/19390213

#SPJ4

Time Period of Oscillation-1/32800 Hz

Time Period of Oscillation - 3.04 × 10¹.

Two related parameters are oscillation frequency and period. Actually, they are the opposites of one another. As a result, the following formula can be used to determine the quartz crystal's oscillation period:

Time Period of Oscillation = 1/Oscillation Frequency

where.

Frequency of Oscillation-32.8 KHz

Frequency of Oscillation - 32800 H₂

Therefore

Time Period of Oscillation-1/32800 Hz

Time Period of Oscillation - 3.04 × 10¹.

learn more about Oscillation https://brainly.com/question/12622728

#4256

The time period of oscillation is 3.04×10

what is time period?

A time period (denoted by 'T'' ) is the time taken for one complete cycle of vibration to pass a given point.[1] As the frequency of a wave increases, the time period of the wave decreases. The unit for time period is 'seconds'.

The related parameters are oscillation frequency and period.They are the opposite of the another.As a result the formula to be used is

frequency=1/time

given:

Frequency of oscillation=32.8khz=32800hz

therefore,

time period of oscillation=1/32800hz

time period of oscillation=3.04×10

learn more about oscillation from here: https://brainly.com/question/28167898

#SPJ4

The sample summary paragraph which discusses an experiment and the results based on the reason why some substances require larger additions before a color change was seen is given below:

If the substance has a weak base solution (pH=8) and you add phenolphthalein, for example, you would only see a pink color change if a lot of phenolphthalein because it is used for stronger bases.

Also, when phenolphthalein is added to acids and weak bases, they tend to have a colorless coloration.

However, if phenolphthalein is added to a strong base, there would be a color change that is noticeable and it would be changed to pink.

This refers to the compound that has the ability to remove a proton from a very weak acid.

Hence, we can see that a summary paragraph is given above based on the use of large addition of elements to some substances before there is a noticeable color change is mentioned above.

Read more about strong bases here:

https://brainly.com/question/15192126

#SPJ1

The change in heat q for the aluminum cup is 141 J.  

A substance's heat capacity is the amount of heat needed to increase its overall temperature by one degree. The heat capacity is known as the specific heat capacity or the specific heat if the substance's mass is unity.

change in heat -

The amount of heat Q that is transported to create a temperature shift depends on the substance and phase involved, the mass of the system, and the magnitude of the temperature change. (A) The temperature change and the amount of heat transported are directly inversely related.

The answer's sign dig is determined by a calculation's lowest sign digits.

The solution will need 3 digits because the temperatures are provided with 3 significant digits and the specified heat has 3 significant digits (the mass has 4 significant digits).

31.91 g   * 0.903 J/g-C  *  (26.1 - 21.2 C) = 141 J

to learn more about Specific Heat go to - https://brainly.com/question/21406849

#SPJ4

A Final statement or concluding statement

The equation that relates wavelength, frequency, and speed of light is

c=λ × ν

To find wavelength, λ = c / f

λ = wavelength in meters

ν = frequency in Hertz (Hz) or 1s or [tex]s^{-1}[/tex].

= 3 ×[tex]10^{8}[/tex] m/s / 4. 75 × [tex]10^{14}[/tex] [tex]s^{-1}[/tex](Using velocity of light as 3 x 108 m/s)

= [tex]6.3[/tex]×[tex]10^{-7}[/tex]m

= [tex]6.3[/tex] × [tex]10^{2}[/tex] nm

Electromagnetic radiation is an electric and magnetic disturbance that travels at the speed of light through space. It has no mass or charge and travels in packets of radiant energy known as photons or quanta.Radio waves and microwaves, as well as infrared, ultraviolet, gamma, and x-rays, are examples of EM radiation.  Electromagnetic radiation moves at a constant speed in the form of a waveform.

The relationship of velocity to wavelength and frequency reveals the wave characteristics of EM radiation.

To learn more about Wavelength of radiation from the given link

https://brainly.com/question/10831225

#SPJ4

Answer:

2k

Explanation:

100W X 10h = 1000Wh = 1KWh thus cost is 2k

Answer:B

0.02166 ohms

Explanation:

Answer:

Explanation:

Formula

Voltage (volts) = current (amps) * resistance (0hms). The terms in brackets are the units.

Givens

V = 13 volts

I = 600 amps

R =  ? ohms

Solution

V = I * R

13 = 600 * R                  Divide both sides by 600

13/600 = 600R/600     Do the division

0.0216 ohms = R           This is almost a dead short.

Answer

R = 0.0216