As energy moves out from the sun’s core toward its surface, it first travels by __________, then by __________, and then by ________

Sucrose, a disaccharide (consisting of two monosaccharides), is table sugar.

A digestive enzyme called sucrase catalyses the breakdown of sucrose into its component sugars, fructose and glucose. One type, sucrase-isomaltase, is secreted at the brush boundary of the small intestine. Invertase, a form of the sucrase enzyme that is more frequently found in plants, also hydrolyzes sucrose but does it in a different way.

Maltose is converted to glucose by maltase. Succrase and lactase, respectively, break down other disaccharides like sucrose and lactose. Sucrase and lactase are enzymes that break down sucrose (also known as "table sugar") and lactose (sometimes known as "milk sugar"), respectively, into glucose and fructose.

Learn more about Sucrase here:

https://brainly.com/question/910699

#SPJ4

An endothermic reaction is favored by raising the temperature of a system in dynamic equilibrium. The mechanism absorbs the increased heat to offset the alteration you made. An exothermic reaction is favored by a system's temperature falling while it is in dynamic equilibrium.

Any chemical process that takes heat from its surroundings is said to be endothermic. The reaction's activation energy comes from the energy that was absorbed. This kind of reaction is characterized by its icy sensation.

An exothermic reaction is one in which energy is given off as heat or light. In contrast to an endothermic process, which draws energy from its surroundings, an exothermic reaction transfers energy into the environment.

Materials like hydrocarbons reacting with oxygen to produce combustion products like water and carbon dioxide is an example of an exothermic process.

learn more about endothermic reaction here

https://brainly.com/question/6506846

#SPJ4

The delocalized cloud of π electrons in benzene is formed by the overlap of 6 p-orbitals.

So, option B is correct one.

In the case of hydrocarbons, delocalisation occurs in benzene rings , where a hexagon of six carbon atoms has decalized electrons spread over the whole ring.

All of the carbon atoms in the benzene rings are [tex]sp^{2}[/tex] orbitals around the ring produces a framework of six sigma bonds, while the unhybridized p-orbitals which are perpendicular to this plane over in side-to-side fashion to form three pi-bonds.

To learn more about benzene

https://brainly.com/question/14525517

#SPJ4

A molecular size affects the rate of evaporation when the larger the intermolecular forces in a compound, the slower the evaporation rate and this correlates with temperature change.

Molecular size seems to have an effect on evaporation rates in that the larger a molecule gets or grows from a base chemical formula, its evaporation rate will get slower.

This is a measure of the area a molecule occupies in three-dimensional space as this relates to the physical size of an individual molecule.

Hence, we can see that a molecular size affects the rate of evaporation the larger the forces, the lower the rate.

Read more about molecular size here:

https://brainly.com/question/16616599

#SPJ1

The process of evaporation by which liquid water changes to vapor is shown by a chemical formulae as follows:

Three separation methods that can be used to reverse a physical change include:

Evaporation is the process by which liquids changes to vapor or gas spontaneously.

The rate of evaporation of a liquid increases with increase in temperature of the liquid. The rate of evaporation also increases with increase in surface area of the liquid exposed as well as with increase in wind speed.

The process by which liquid water changes to vapor can be represented by chemical formulae as follows:

H₂O (l) → H₂O (g)

In the equation above, the liquid phase of water, l, is undergoing change to gaseous phase, g.

b. Separation techniques are techniques which are used to separate mixtures of substances.

Three separation methods that can be used to reverse a physical change include:

In conclusion, physical changes are those changes that are easily reversible and which no new products are formed.

Learn more about evaporation of water at: https://brainly.com/question/25310095

#SPJ1

The primary sources of acidity in acid rain are the gases SO[tex]_{2}[/tex] and NO[tex]_{x}[/tex] So, the correct option is (c) SO[tex]_{2}[/tex] and NO[tex]_{x}[/tex]

A chemical process that starts when gases like sulphur dioxide and nitrogen oxides are discharged into the atmosphere leads to acid rain. These substances have the ability to ascend very far into the sky, where they combine and react with oxygen, water, and other chemicals to produce acid rain, an additional form of acidic pollution.

Acidic particles corrode metal and hasten the deterioration of paint and stone. Power plants are the primary sources of SO[tex]_{2}[/tex] . Burning fossil fuels produces nitrogen dioxide (like gasoline). Cars, lorries, and power plants are the biggest producers of NO[tex]_{2}[/tex].

Therefore, The primary sources of the acidity in acid rain are the gases SO[tex]_{2}[/tex] and NO[tex]_{x}[/tex].So, the correct option is (c) SO[tex]_{2}[/tex] and NO[tex]_{x}[/tex]

Learn more about acid rain here;

https://brainly.com/question/11543614

#SPJ4

2mol of Hydrogen peroxide releases 196.6KJ heat

1mol releases

5mol releases

Answer: 491.5

Explanation:

Hope this helps :)

0.42 mol 7.3 L volume of O2 is produced when 28. 5 g of hydrogen peroxide (H2O2) decomposes to form water and oxygen at 150°C and 2. 0 atm

A moderate antiseptic used topically to treat minor burns, scrapes, and cuts is hydrogen peroxide. As a mouth rinse, it can be used to assist clear mucus or soothe minor oral irritation (caused, for example, by canker/cold sores, or gingivitis).

Stronger than chlorine, chlorine dioxide, and potassium permanganate, hydrogen peroxide is a potent oxidant.

Human blood is exposed to a hydrogen peroxide solution, which causes the peroxide to break down and release oxygen. Before transfusion, this process has been utilized to oxygenate banked blood.

When hydrogen peroxide comes into contact with skin, a chemical process takes place that causes hydrogen peroxide to turn white. When the solution oxidizes, oxygen bubbles that arise give the mixture a white, foamy appearance.

To learn more about hydrogen peroxide please visit -
https://brainly.com/question/18709693
#SPJ4

The conductivity of the solution in a reaction can be used to measure rates of reactions involving aqueous electrolytes. The correct option is D.

Conductivity is a property that tells if a material can pass heat and light through it. Conductor are hose material that pass the heat and plight through it. Those material that do not transfer the heat are called non-conductor.

The conductivity of a solution in a reaction. To measure the change in the rates of a solution that involve the aqueous electrolyte, the conductivity of the solution is measured.

Thus, the correct option is D. aqueous electrolytes.

To learn more about conductivity, refer to the link:

https://brainly.com/question/21496559

#SPJ4

The question is incomplete. Your complete question is given below:

These are the options:

Gaseous substances

brightly colored substances

organic compounds

aqueous electrolytes

Explanation:

According to orbital hybridization theory, in ethene the C atoms are using sp2 hybrid orbitals. This leaves one unhybridized p orbital available to form the second bond (Pi bond) in the C-C double bonds.

One sp2 hybrid orbital from each C atom overlap to form one sigma bond between the two carbon atoms. One p orbital from each C atom then overlap to form a pi bond that completes the C-C double bond. The H atoms are bonded via sigma bonds to the C atoms when the H s orbitals overlap with the remaining sp2 hybrid orbitals from each C.

Alkali metals nitrates on heating give the corresponding nitrogen dioxide and oxygen.

These are the metals which forms alkali when dissolved in water. They are any of the soft, light, reactive metals of Group 1 of the periodic table.

Some examples of alkali metals are as follows:

A periodic table is a tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same column.

So therefore, alkali metals nitrates on heating give the corresponding nitrogen dioxide and oxygen.

Learn more about alkali metals:

https://brainly.com/question/3511615

#SPJ1

Answer:

A solution with a ph of 6 has 100 times as many hydrogen ions as a solution with a ph of 8.

Explanation:

At 7 on the pH scale, a solution is neutral. Any pH lower than 7 is acidic and any pH above 7 is basic.

Acidity is a measure of the concentration of hydrogen ions in a solution. The more acidic a solution, the more hydrogen ions it has. Therefore, if the pH is decreasing, the hydrogen ion concentration is increasing.

The pH scale increases by a factor of 10. This means that for every one unit change, the hydrogen ion concentration changes tenfold. Therefore, if the pH is decreasing by 2 units (from pH 8 to pH 6), the hydrogen ion concentration should increase 100-fold (10 x 10 = 100).

12.28 L volume at 6.98atm in sample gas occupies 10. 28 l at 8. 34atm. Hence, option A is correct.

Ideal gas is a hypothetical gas whose molecules occupy negligible space and have no interactions, and which consequently obeys the gas laws exactly.

In the limit of low pressures and high temperatures, where the molecules of the gas move almost independently of one another, all gases obey an equation of state known as the ideal gas law:

PV = nRT,

When Temperature is constant so, it follow Boyle's law:

P1 V1 = P2 V2

P1 = 8.34atm, V1 = 10.28 L, P2 = 6.98atm

V2 = P1 V1 / P2

V2 = 8.34atm x 10.28 / 6.98atm

V2 = 12.28 L

12.28 L volume at 6.98atm in sample gas occupies 10. 28 l at 8. 34atm. Hence, option A is correct.

Learn more about ideal gas, Here:

https://brainly.com/question/3961783

#SPJ4

Answer:

Al₂O₃ + 6 NaOH -----> 2 Al(OH)₃ + 3 Na₂O

Explanation:

This is a double-displacement reaction. In these reactions, the cation of one compound is swapped with the cation of another.

It is important that the new products have an overall charge of 0. To do this, some compounds must have more than 1 atom of each ion.

1.) Al(OH)₃

-----> Al³⁺ and OH⁻

-----> +3 + (-1) + (-1) + (-1) = 0

2.) Na₂O

-----> Na⁺ and O²⁻

-----> +1 + 1 + (-2) = 0

An equation is balanced when there is an equal amount of each element on both sides of the reaction. If these values are unequal, you can add coefficients to modify the amounts of particular compounds.

The unbalanced equation:

Al₂O₃ + NaOH -----> Al(OH)₃ + Na₂O

Reactants: 2 aluminum, 4 oxygen, 1 sodium, 1 hydrogen

Products: 1 aluminum, 4 oxygen, 2 sodium, 3 hydrogen

The balanced equation:

Al₂O₃ + 6 NaOH -----> 2 Al(OH)₃ + 3 Na₂O

Reactants: 2 aluminum, 9 oxygen, 6 sodium, 6 hydrogen

Products: 2 aluminum, 9 oxygen, 6 sodium, 6 hydrogen

Answer:

The reactivity series allows us to predict correctly how metals will react. Another importance is that so we can use displacement. We can spot a more reactive metal allowing us to displace a less reactive metal from a compound or an equation.

Hope this helped! Marking me brainliest will be very helpful!

Please comment below if you require more assistance from me! :)

Importance of Metal Reactivity Series are:

What are metal reactivity series?

Metal reactivity series is a chart of listing the metals in the order of decreasing reactivity.

See the below reaction:

K(s)        +            [tex]H_2O[/tex]   →           KOH(aq)              +                  1/2 [tex]H_2[/tex] (g)

Potassium      water              Potassium Hydroxide                Hydrogen

Lets see the reaction between Lead with Hydrochloric acid and Sulphuric acid.

Pb (s)      + 2HCl (aq)           →              [tex]PbCl_2[/tex] (aq)           +       [tex]H_2[/tex] (g)

Lead        Hydrochloric acid          Lead chloride                  Hydrogen

Pb (s)      +   [tex]2H_2SO_4[/tex]             →     [tex]PbSO_4[/tex]              +   [tex]SO_2[/tex]                   +   [tex]H_2O[/tex]

Lead         Sulphuric acid            Lead Sulphate      Sulphur dioxide    water

To learn more about Metal reactivity series:

brainly.com/question/17469010

#SPJ2

The product of reduction of ethyl 4-oxobutanoate with sodium borohydride in ethanol at room temperature for 30 minutes is ethyl 4- hydroxybutanoate .

Sodium borohydride is a relatively selective reducing agent  Ethanolic solutions of Sodium borohydride reduces aldehyde , and ketone , in the presence of acid chloride , ester , epoxide , lactones , acids , nitriles , nitro groups.

The sodium borohydride does not reduce ester group because sodium borohydride is not strong enough and the electrophilicity at carbony carbon of ester is not more as compare toaldehyde , and ketone

The product of reduction of ethyl 4-oxobutanoate with sodium borohydride in ethanol at room temperature for 30 minutes is ethyl 4- hydroxybutanoate .

to learn more about sodium borohydride and ethanol click here ,

https://brainly.com/question/12955502

#SPJ4

Old and inefficient mining smokestacks contaminate the soil around abandoned mine sites.

A mine is an area from which natural resources are extracted such as coal, metals, etc. A mine is known to be the source of many heavy metals as well as acid.

As such the statement that does not represent the impact of mining services is that; "Old and inefficient mining smokestacks contaminate the soil around abandoned mine sites".

Learn more about mine sites:https://brainly.com/question/25875677

#SPJ1

The pH after 10. 0 ml of 0. 40 M NaOH is added to 20. 0 ml of 0. 50 M HCl is 13.3 .

Calculation ,

[ [tex]OH^{-}[/tex] ] = [tex]M_{1} V_{1} -M_{2} V_{2} /V_{1} +V_{2}[/tex]

where M is molarity and V is the volume .

[ [tex]OH^{-}[/tex] ] = 0. 50 M × 20. 0 ml - 0. 40 M × 10. 0 ml / 10. 0 ml +20. 0 ml

[ [tex]OH^{-}[/tex] ] = 6/30 = 0.2

pOH = -㏒[ [tex]OH^{-}[/tex] ]  =  -㏒ 0.2 = 0.7

pH = 14 - pOH =  14 - 0.7 = 13.3

Therefore , the pH after 10. 0 ml of 0. 40 M NaOH is added to 20. 0 ml of 0. 50 M HCl is 13.3 .

To learn more about pH please click here

https://brainly.com/question/15289741

#SPJ4

The "break-even" interest rate for year n that equates the return on an n-period zero-coupon bond to that of an n - 1 - period zero-coupon bond rolled over into a one-year bond in year n is defined as the forward rate.

A forward rate is a specified price agreed by all parties involved for the delivery of a good at a specific date in the future. The use of forward rates can be speculative if a buyer believes the future price of a good will be greater than the current forward rate. Alternatively, sellers use forward rates to mitigate the risk that the future price of a good materially decreases.

Regardless of the prevailing spot rate at the time the forward rate meets maturity, the agreed-upon contract is executed at the forward rate. For example, on January 1st, the spot rate of a case of iceberg lettuce is $50. The restaurant and the farmer agree to the delivery of 100 cases of iceberg lettuce on July 1st at a forward rate of $55 per case. On July 1st, even if the price per case has decreased to $45/case or increased to $65/case, the contract will proceed at $55/case.

To extract the forward rate, we need the zero-coupon yield curve.

We are trying to find the future interest rate [tex]{\displaystyle r_{1,2}}{\displaystyle r_{1,2}}[/tex]  for time period  

[tex]{\displaystyle (t_{1},t_{2})}(t_1, t_2), {\displaystyle t_{1}}t_{1}[/tex]  and  [tex]{\displaystyle t_{2}}t_{2}[/tex]  expressed in years, given the rate  [tex]{\displaystyle r_{1}}r_{1}[/tex]  for

time period  [tex]{\displaystyle (0,t_{1})}(0, t_1)[/tex]  and rate [tex]{\displaystyle r_{2}}r_{2}[/tex]  for time period [tex]{\displaystyle (0,t_{2})}(0, t_2)[/tex].  To do this, we use the property that the proceeds from investing at rate  [tex]{\displaystyle r_{1}}r_{1}[/tex] for

time period [tex]{\displaystyle (0,t_{1})}(0, t_1)[/tex]  and then reinvesting those proceeds at rate

[tex]{\displaystyle r_{1,2}}{\displaystyle r_{1,2}}[/tex]  for time period  [tex]{\displaystyle (t_{1},t_{2})}(t_1, t_2)[/tex]  is equal to the proceeds from

investing at rate [tex]{\displaystyle r_{2}}r_{2}[/tex] for time period [tex]{\displaystyle (0,t_{2})}(0, t_2)[/tex].

Learn more about forward rate here : https://brainly.com/question/28016374

#SPJ4

There are 0. 650 moles of sodium bromide can be produced from the reaction of 1. 03 moles of bromine gas with 0. 650 moles of sodium .

Calculation ,

To find the number of moles of sodium bromide we have to write balanced chemical equation first .

[tex]2Na (s)+ Br_{2}(g)[/tex] → 2NaBr (s)

from the equation we can conclude that 2 moles sodium react with one mole of bromine to form 2 mole of sodium bromide .

But  1. 03 moles of bromine gas ( that is equal to the number of moles required in the equation) with 0. 650 moles of sodium ( that is half of required mole ) is given .

So, sodium is present as limiting reactant .

So , the number of sodium bromide formed is equal to the number of moles of sodium atom.

Hence ,  the number of sodium bromide formed =  0. 650 moles

To learn more about sodium bromide please click here

https://brainly.com/question/15409724

#SPJ4

The mass, in grams, of the chlorine gas will be 0.84 grams

At standard temperature and pressure, 22.4 L of gas has 1 mole of the gas in it.

This time, what we have is 265 mL of the gas at STP. 265 ml is equivalent to: 265/1000 = 0.265 L

If.

22.4 L = 1 mole

Then,

0.265 L = 0.265 x 1/22.4 = 0.01183 moles

This means that 0.01183 moles of chlorine is present in the gas at STP.

Mass of 0.01183 moles of chlorine = moles x molar mass.

The molar mass of chlorine gas is 71

Mass of the chlorine gas = 0.01183 x 71 = 0.84 grams

More on gases at STP can be found here: https://brainly.com/question/14004233

#SPJ1

3rd statement about this acidic reaction is not true

In acidic reactions,  Litmus paper is available in red and blue varieties and is typically more trustworthy. To determine whether a solution is normal or acidic, use litmus paper. The acid or basic strength is not precisely outlined in Litmus's paper. Thus, Base causes red litmus to turn blue.

The pH scale has numbers 0 through 14. Seven is the neutral pH. Over 7 is a base, and anything below 7 is acidic.

H+ ions are present in all acidic reactions. As a result, whether mineral or organic, all acid solutions transmit electricity. They allow an electric current to flow through them.

To learn more about acidic reaction please visit -
https://brainly.com/question/3069273
#SPJ4

Hydroplaning occurs when water between the tires and the road builds until the tires begin to ride on a film of water, resulting in traction loss.

The motor vehicles or aircraft tires passing over wet pavement may lose contact with sufficient speed or water depth for a particular given tread design. The tires lose the braking friction required for stopping and start to hydroplane or aquaplane when they come into contact with water. Wet road surfaces can cause tires to hydroplane . This could result in loss of control and steering ability.

learn more about hydroplane

https://brainly.com/question/9422840

#SPJ4

The statement that the concentration of carbon will not change if gaseous water is added to the system is false. The concentration of carbon will increase.

Concentration of a substance is the present of a substance in a per-unit square of an area. It is the total amount of solute present in the solution.

The equilibrium is C(s) + H₂O(g) < - > CO(g) + H₂(g), ΔH = 2296 J.

If we increase or add the gaseous water in the system, the amount of carbon will increase because the carbon is a gas, and increasing the pressure will increase the volume of the gas, at Constant temperature.

Thus, the statement is false.

To learn more about concentration, refer to the link:

https://brainly.com/question/16942697

#SPJ4

A monosaccharide that consists of 5 carbon atoms, one of which is in a ketone group, is classified as a(n) ketopentose.

Ketone family

The suffix "-one" is added after locating the carbonyl group and, if necessary, designating it with a location number. Ketones are given their common names by first identifying the alkyl groups linked to the carbonyl (in alphabetical order), followed by the prefix "ketone." Several Regular Ketones. The three most significant ketones in terms of scale are acetone, methyl ethyl ketone, and cyclohexanone. Though less frequently than in general organic chemistry, they are still widespread in biochemistry. The simplest ketone is dimethyl ketone, or CH3COCH3, often known as acetone.

To learn more about the ketone group refer here:

https://brainly.com/question/14002520

#SPJ4

England topped what torturous temp for the first time of 40°C

For the first time ever, Britain experienced temperatures on Tuesday of over 40 degrees Celsius, or 104 degrees Fahrenheit, as a fierce heat wave moved northwest, causing raging wildfires, fatalities, and forced home evacuations throughout a Europe that was terrifyingly unprepared to deal with the new reality of extreme weather.

A heat wave is a period of very hot weather that may also be accompanied by significant humidity, especially in nations with maritime climates. While there are several definitions, a heat wave is typically assessed in relation to the local climate and the average temperatures for the time of year.

Learn more about Heat wave here:

https://brainly.com/question/28000177

#SPJ4

Pair of LiI and Ca(NO3)2 is soluble in water.

Here LiI stands for lithium iodide and Ca(NO3)2 stands for Calcium Nitrate.

Water's polarity, which is the unequal sharing of electrons among its atoms, is what allows it to be such a great solvent. Typically, water is held together through this polarity of partial positive and negative charges. Positive is attracted to negative, making a cohesive structure. When polar compounds or ions are added to water, they break up into smaller components, or dissolve, to become part of the solution. The water's partial charges attract different parts of the compound, making them soluble in water.

Polar Molecules

Similar to ions, polar molecules are able to dissolve in water. Like water, polar molecules have partial positive and negative charges. The attraction between opposite partial charges helps polar molecules dissolve in water.

Water doesn't have a full positive or negative charge; instead, it possesses a partial positive and partial negative charge. This is because oxygen is a lot more electronegative than hydrogen. This means that oxygen draws more electrons to it than the hydrogen does. Since more electrons are moving towards the oxygen, it has a slightly higher negative charge than water's hydrogen atoms.

Let's look at another simple example: a carbon-fluorine bond. Since fluorine is more electronegative than carbon, it draws more electrons over to it, making it partially negative.

To learn more about Polarity : https://brainly.com/question/26849258

#SPJ4

pH of the solution after 24. 00 ml of the hcl has been added is 12.87

millimoles NaOH = mL x M = 24.00 mL x 0.25 M = 6.00

millimoles HCl = 24.00 mL x 0.10 M = 2.40

total volume = 48.00 mL

.................................NaOH + HCl ==>NaCl + H2O

initial.........................6.00.........0............0.........0

added.....................................2.40............................

change.................... -2.40......-2.40.........+2.40.... +2.40

equilibrium.................3.60.........0..............2.40.......2.40

The NaCl contributes nothing to the pH of the final solution. The pH is determined by the excess of NaOH present. (NaOH) = millimoles/mL = 3.60/48.00 = 0.075 M = (OH^-)

pOH = -log (OH^-). Then

pOH = -log (0.075)

pOH =1.1249

As we know,

pH + pOH = pKw = 14.00

pH=14-pOH

pH=14-1.1249

pH=12.87

pH is a logarithmic measure of an aqueous solution's hydrogen ion concentration. pH = -log[H+], where log is the base 10 logarithm and [H+] is the concentration of hydrogen ions in moles per liter.

The pH of an aqueous solution describes how acidic or basic it is, with a pH less than 7 being acidic and a pH greater than 7 being basic. A pH of 7 is regarded as neutral (e.g., pure water). pH values typically range from 0 to 14, though very strong acids may have a negative pH and very strong bases may have a pH greater than 14.

Learn more about pH:

https://brainly.com/question/491373

#SPJ4

A membrane is impermeable to charged molecules and does not allow the passage of ions because the charged molecules possess polarity and the membrane possesses hydrophobic interiors.

Charged hydrophilic molecules of all sizes, from small molecules to giant enzymes, can now be made more soluble via a technique called hydrophobic ion pairing. Hydrophobic molecules having hydrophilic moieties are ionically coupled with charged hydrophilic molecules, and the resulting uncharged complex is water-insoluble and will precipitate in aqueous conditions.

With polar solvents like water or alcohol, hydrophilic compounds can easily establish hydrogen bonds. Ionic (charged) groups with oxygen or nitrogen atoms make up the chemical structure of hydrophilic compounds. Typically, a substance's hydrophilicity is determined by its polarity. A molecule will be hydrophobic overall even if it has polar covalent bonds and these bonds are distributed symmetrically.

Learn more about hydrophobic here:

https://brainly.com/question/18522370

#SPJ4