Answer:
They're are useful in providing larger frictional force
Explanation:
The football shoes have spikes or studs because the studs or spikes provides larger frictional force than normal shoes while running on the grass.
The studs helps to prevent a player from slipping on the grass and help to run faster and change direction quickly without slipping.
You start walking from a point on a circular field of radius 0.5 km and 1 hour later
you are at the same point. What is your average speed for the whole journey?
Answer:
1). average velocity= displacement/time
= here displacement is zero
= 0/1
= 0 m/s
2). average speed= total distance/time
=2πr/1
=(2×22/7×5/10)/1
22/7
3.14 km/h
hope it helps you
please mark brainliest
Explanation:
Answer:
[tex]\sf \fbox{speed = 3.14 kmph}[/tex]
Explanation:
Given:
Radius of circular field (r) = 0.5 Km
Time taken to complete one round of field (t)= 1 hour
To find:
Average speed for the whole journey=?
Solution:
To find the average speed we will have to find the actual distance covered in given time, & the actual distance covered would be equal to the
[tex] \sf \: perimeter \: of \: circular \: field = 2 \pi r \\ \sf 2 \pi r = 2 \times 3.14 \times 0.5 = 3.14 \: km[/tex]
Distance covered in 1 hour is 3.14 km,
[tex]\small \sf Average \: speed = \frac{Distance}{Time} = \frac{3.14}{1} \\ \small \sf \fbox{speed = 3.14 kmph}[/tex]
[tex] \small\sf \: Thanks \: for \: joining \: brainly \: community! [/tex]
After an action potential, the opening of additional voltage-gated \text{________} channels and the inactivation of sodium channels, cause the membrane to return to its resting membrane potential.
After an action potential, the opening of voltage-gated potassium channels and Na channels causes the membrane to return to its resting membrane potential.
What is an action potential?An action potential is defined as a difference in electrical charges across the cell membrane due to the unequal distribution of ions.
An action potential is produced by potassium and sodium channels that allow the movement of positive ions across the membrane.
In conclusion, after an action potential, the opening of voltage-gated potassium channels and Na channels causes the membrane to return to its resting membrane potential.
Learn more about action potential here:
https://brainly.com/question/7778945
#SPJ1
Which of the following describe advantages of using radio waves over other electromagnetic waves to transmit information to Earth? Select ALL that apply.
A
Radio waves travel faster.
B
Radio waves take less energy to produce.
C
Radio waves transmit more types of information.
D
Radio waves have a lower frequency, which makes them safer for humans.
E
Radio waves have higher energy, which makes their signal easier to capture.
The correct options are:
D
"Radio waves have a lower frequency, which makes them safer for humans."
B
"Radio waves take less energy to produce."
Why do we radio waves over other electromagnetic waves to transmit information to Earth?
Radio waves are electromagnetic waves with frequencies on the range from 10 KHz to 10 THz.
Now, remember that all electromagnetic waves have the same speed, which is the speed of light, and the energy of a wave is proportional to its frequency.
Particularly, we can see that radio waves have small frequencies (smaller than infrared light) so these waves carry very little energy.
With that in mind, the correct options are.
D
"Radio waves have a lower frequency, which makes them safer for humans."
B
"Radio waves take less energy to produce."
These are the two main reasons of why we use radio waves.
If you want to learn more about electromagnetic waves.
https://brainly.com/question/14015797
#SPJ1
An airplane flies with a velocity of 55.0 m/s [35o N of W] with respect to the air (this is known as air speed). If the velocity of the airplane according to an observer on the ground is 40.0 m/s [53o N of W], what was the wind velocity?
The wind velocity of the plane in discuss can be evaluated by means of the air velocity if the plane and the observed velocity is; 20.98m/s.
What is the wind velocity of the according to the observed velocity?It follows from the task content that the air velocity of the plane in discuss is; 55.0 m/s [35o N of W] while the observed velocity is; 40.0 m/s [53o N of W].
Hence, the components of both velocities can be evaluated as follows;
55.0 m/s [35o N of W] = (55cos35, 55sin35) = (45.05, 31.55)
40.0 m/s [53o N of W] = (24.07, 31.95)
Hence, the wind velocity can then be evaluated as follows;
Wind velocity = (24.07 - 45.05, 31.95- 31.55)
Wind velocity = (-20.98, 0.40)
The wind velocity would therefore have a magnitude of; √(-20.98)² + (0.40)²
= 20.98 m/s.
Read more on velocity components;
https://brainly.com/question/25854506
#SPJ1
When measuring a condominium you should calculate ____ using _______ measurements.
When measuring a condominium you should calculate GLA using interior measurements.
What is condominium?A condominium is an individually owned home surrounded by other homes.What is GLA?GLA stands for Gross Living Area
The GLA is the "total area of finished, above-grade residential space; computed by measuring the outer perimeter of the structure and comprises only finished, habitable, above-grade dwelling space," according to The Dictionary of Real Estate Appraisal.How is GLA calculated?To determine a property's above-grade gross living area, the appraiser should divide the external building dimensions by the number of floors. (The below-grade area is likewise subject to the measuring process)The appraiser should utilize interior perimeter unit dimensions to determine the gross living area for units in condo or co-op structures.Basements and garages, even those that are partially above-grade, are not to be counted in the number of rooms above grade.Pros of condominium:Lower-maintenance livingSense of securitySocializing opportunitiesAffordabilityAmenitiesCons of condominium:HOA rulesInvestment riskHigher interest ratesLack of privacyLimited outdoor spaceRising HOA feesSpecial assessmentsRestrictive rental policiesTo learn more about condominium visit:
https://brainly.com/question/14054404
#SPJ4
What is a supply chain designed to optimize both forward and reverse flows?
a. open-loop supply chain
b. closed-loop supply chain
c. bullwhip-loop supply chain
d. reverse-loop supply chain
The correct option is b. closed-loop supply chain
Closed-loop supply chain is designed to optimize both forward and reverse flows.
What is closed-loop supply chain?Businesses recycle their waste volume to make new products in such a closed-loop supply chain. This method of resource conservation and energy conservation is sustainable.
Some characteristics of closed-loop supply chain are-
Although there are many natural resources on the planet, such as freshwater and oil, they are limited and will eventually run out. Fortunately, numerous governments all across the world have created and put into effect ways to lessen resource waste.Likewise, companies can contribute to the preservation of natural resources by implementing the closed-loop supply chain (CLSC). The appeal of a CLSC or negligible supply chain is that it centers on material reuse, composting, and recycling. As a result, the closed-loop supply chain encourages manufacturers to come up with creative uses for End-of-Life (EOL) products rather than disposing of them in landfills.To know more about supply chain, here
https://brainly.com/question/15207236
#SPJ4
When the atmosphere becomes loaded with particles, only the _____ wavelengths are able to penetrate the atmosphere.
Visible light are able to penetrate the atmosphere
What is Wavelength?A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is often defined in wireless systems in metres (m), centimetres (cm), or millimetres (mm).
The electromagnetic spectrum is made up of a variety of electromagnetic radiations, including radio waves, microwaves, infrared light, visible light, ultraviolet light, X-rays, and gamma rays. Because the earth's atmosphere blocks off the majority of the electromagnetic spectrum's wavelengths, most electromagnetic energy from space cannot reach the planet's surface.
. A portion of the electromagnetic spectrum that humans can see with our eyes is the visible light or spectrum. The electromagnetic spectrum's band that can most easily reach Earth's surface is also this one.
to learn more about Wavelength go to - https://brainly.com/question/14640182
#SPJ4
A 0. 20-kg ball is attached to a vertical spring. the spring constant is 28 n/m. when released from rest, how far does the ball fall before being brought to a momentary stop by the spring?
A 0. 20-kg ball is attached to a vertical spring. The spring constant is 28 n/m. when released from rest, the ball will fall at a distance of x = 0.14 m before being brought to a momentary stop by the spring.
The spring constant is the force needed to stretch or compress a spring, divided by the distance that the spring gets longer or shorter. It's used to determine stability or instability in a spring
Elastic potential energy is Potential energy stored as a result of deformation of an elastic object, such as the stretching of a spring. It is equal to the work done to stretch the spring, which depends upon the spring constant k as well as the distance stretched.
When ball is released from rest with spring , it will loose some potential energy . Hence , loss in potential energy of the ball = gain in potential energy of spring
m*g*x = 1/2 * k * [tex]x^{2}[/tex]
0.20 * 9.8 * x = 1/2 * 28 * [tex]x^{2}[/tex]
x = (2 * 0.20 * 9.8) / 28
x = 0.14 m
To learn more about spring constant here
https://brainly.com/question/14670501
#SPJ4
A lorenz curve represents the cumulative percentage of total income received along the ________ and the cumulative share of population along the ________
A lorenz curve represents the cumulative percentage of total income received along the horizontal axis and the cumulative share of population along the vertical axis.
The distribution of the cumulative percent of occurrences by the cumulative percent of population is shown graphically by the Lorenz Curve. By expanding the neighbourhood income quintile group, the horizontal axis (x-axis) of the curve shows the cumulative percent of persons in the population, and the vertical axis (y-axis) shows the cumulative percent of events in the population.
The Lorenz curve can be described as the proportion of the population that the neighbourhood income quintile represents holding the proportion of population events.
Learn more about lorenz curve here:
https://brainly.com/question/14233099
#SPJ4
A particle moving in a straight line with uniform deceleration has a velocity of 40m/s at point P, 20m/s at point Q
and comes to rest at point R where QR=50m .Calculate the
1.Distance PQ
2.Time taken to cover PQ
3.Time taken to cover PR
The distance between PQwill be 10,time taken to cover PQ will be 0.25sec and time taken to cover PR will be 3sec.
What is uniform deceleration?
Uniform deceleration is when velocity decrease by equal intervals of time .
Given ,
Velocity at P is 40 m/ s,
Velocity at Q is 20 m/ s
Distance between QR will be 50m.
let the whole distance between PR will be x,
so time taken of PQ, equating both times of PQ and QR we will get this,
x-50/40 = 50/ 20
after calculating ,
x = 60m , this the distance of whole straight line
60-50=. 10 m
the distance between PQ will be 10
2) time taken to cover PQ
. V= d/ t
t= 0.25s
3) time taken to cover PR
20=60/ t
t= 3sec.
to learn more about uniform deceleration click here https://brainly.in/question/325091
#SPJ9
1. PQ=150m.
2. PQ: [tex]t=5s[/tex]
3. QR: [tex]t=5s[/tex]
What is velocity?The vector quantity velocity (v), denoted by the equation v = s/t, quantifies displacement (or change in position, s) over the change in time (t). Speed (or rate, r) is a scalar number, denoted by the equation r = d/t, that quantifies the distance traveled (d) over the change in time (t).
QR=50m.
[tex]V_{Q} (u)=20ms^{-1} ,V_{R} v[/tex]
[tex]v^{2} =u^{2}+2as[/tex]
[tex]0=20^{2} +2a*50[/tex]
100a=-400
[tex]a=-4ms^{-2}[/tex]
1. Distance PQ:
[tex]u_{p} (u)=40msx^{-1} , v_{Q (v)=20ms^{-1}[/tex]
[tex]v^{2} =u^{2} +2as[/tex]
[tex]20^{2} =40^{2} -2*4s[/tex]
400=1600-400
8s=1600-400
[tex]s=\frac{1200}{8} =150m[/tex]
PQ=150m
2.Time taken to cover PQ:
v=u+at
20=40-4t
4t=40-20
[tex]t=\frac{20}{4}=5s[/tex]
3. Time taken to cover PR:
v=u+at
0=20-4t
[tex]t=\frac{20}{4}=5s[/tex]
1. PQ=150m.
2. PQ: [tex]t=5s[/tex]
3. QR: [tex]t=5s[/tex]
To learn more about velocity, refer to:
https://brainly.com/question/25749514
#SPJ4
An immersion heater has a power rating of 1500 watts. it is used to heat water for coffee. how long (in minutes) should it take to bring 0. 7 l of water from room temperature (20°c) to 80°c?
1.96 minutes long should it take to bring 0. 7 l of water from room temperature (20°c) to 80°c.
To find the answer, we have to know about the heat energy.
How to find the time taken to raise the temperature?It is given that,[tex]Power,P=1500W\\Volumw, V=0.7L\\T_1=20^0C \\T_2=80^0C[/tex]
We have to find mass of water first, and the expression is,[tex]m=\rho V=1kg/L*0.7L=0.7kg[/tex]
Heat energy required to raise the temperature from 20 to 80 degree Celsius is,[tex]Q=mc\Delta T=0.7*4182(80-20)\\Q=1.76*10^5J[/tex]
where, c equals to 4182J/kg°C.
This energy can be related with power and then the time will be,[tex]t=\frac{E}{P} =\frac{1.76*10^5}{1500} =117.3s=1.96minutes.[/tex]
Thus, we can conclude that, 1.96 minutes long should it take to bring 0. 7 l of water from room temperature (20°c) to 80°c.
Learn more about heat energy here:
https://brainly.com/question/27381457
#SPJ4
The radiation emitted by a heat source reaches its peak wavelength at 6. 69 µm. determine the temperature (in celsius) of the source
the temperature of the source is 159.884°C
How to determine the temperature of the source ?given data:-
λmax=6.69
by using weins law:- Wien’s law, also called Wien’s displacement law, relationship between the temperature of a blackbody (an ideal substance that emits and absorbs all frequencies of light) and the wavelength at which it emits the most light .The wavelength at which maximum radiation is emitted is expressed by the Greek letter “ λ ”.T is the object's temperature in Kelvin, and the constant is 2,897 μm.The higher the object's temperature, the faster the molecules will vibrate and the shorter the wavelength will be.
λmax = constant / temperature(in kelvin) temperature(in kelvin) = constant/λmax temperature(in kelvin) =2897/6.69
temperature(in kelvin)=433.03
temperature(in celsius) = temperature(in kelvin)-273.15
temperature(in celsius)= 159.88
Thus from the above conclusion we can say that at peak wavelength at 6. 69 µm the temperature is 159.884°C.
Learn more about the weins law here: https://brainly.in/question/15651476
#SPJ4
In a similar rolling race (no slipping), the two objects are 2 solid cylinders of the same mass but different radii. which reaches the bottom first?
The solid cylinder reaches the bottom first.
A (solid) cylinder is a solid that has two parallel planes and a cylindrical surface surrounding it. An element of the cylinder is a line segment that is determined by an element of the cylindrical surface between two parallel planes. A cylinder's components are all the same length. The material's velocity would be higher if the moment of inertia was lower and the radius of gyration k was smaller. In comparison to a hollow cylinder with k as 1, a solid cylinder with k as 1/2 will move at a faster speed. Their energies at both levels, including potential energy and energy lost through friction, would stay the same because they had the same mass and radius.
Learn more about solid cylinders here brainly.com/question/18801887
#4269
A solid cylinder and a hollow cylinder of the same mass and radius, both initially at rest, roll down the same inclined plane without slipping. Choose the correct options.
The solid cylinder reaches the bottom first.
A solid object will always roll down the ramp faster than a hollow object of the same shape regardless of their exact mass or diameter.
The solid cylinder has a lower moment of inertia than the hollow one does. Although they have the same mass, all the hollow cylinder's mass is concentrated around its outer edge so its moment of inertia is higher.
The velocity would be greater for the material with radius of gyration k is lower of for which the moment of inertia is lower. Solid cylinder with k as 1/2 will have greater velocity as compared to hollow cylinder which has k as 1. As they have same mass and radius their energies at both the levels would remains same including the potential energy and energy lost due to friction.
learn more about moment of inertia from here: https://brainly.com/question/28167913
#SPJ4
The development and use of alternative energy source is very necessary in present day world. Explain this statement.
Answer:
In today's world pollution is very high so alternative energy such as solar energy help us to make pollution free world. So it is necessary to use alternative energy.
A disk rotates with constant angular acceleration of 5. 45~\text{rad/s}^25. 45 rad/s 2. starting from rest, it turns through 220 rad. how much time elapses while it turns through the 220 radians?
The time elapsed is 8.98 sec when it turns through the 220 radians.
given:
initial angular velocity (ω°) = 0 rad/secangular acceleration (α) =5.45 [tex]rad/sec^{2}[/tex]total angular displacement (Ф) = 220 radusing second equation of motion for rotation
we get ,
[tex]220=0.t + \frac{1}{2}.5.45.t^{2}[/tex]
t^2 =80.98
t=8.98sec
therefore time elapsed is 8.98sec .
learn more about equation of rotation here:
https://brainly.com/question/2063327
#SPJ4
A wave of wavelength 1.2m travels 11.2m to a wall in 2s. what's the frequency of the wave
Answer: f = 4.67 Hz
Explanation:
We can approximate the wave as a traveling wave, therefore the speed of the wave is constant
v = d / t
the total distance remember, in going to the wall and back is
d = 2 11.2 = 22.4 me
we substitute
v = 22.4 / 4.0
v = 5.6 m / s
now we can use the relationship between the speed of the wave, its wavelength and u frequency
v =λ f
f = v /λ
f = 5.6 / 1.2
f = 4.67 Hz
A 0. 22 kg clay target is fired at an angle of 35° to the horizontal. it reaches a maximum height of 4. 6 m. what is its initial speed when it is launched?
A 0. 22 kg clay target is fired at an angle of 35° to the horizontal. It reaches a maximum height of 4. 6 m. Its initial speed when it is launched will be u = 16.66 m/s
Projectile motion is the motion of an object thrown (projected) into the air. After the initial force that launches the object, it only experiences the force of gravity. The object is called a projectile, and its path is called its trajectory.
The object's maximum height is the highest vertical position along its trajectory. The horizontal displacement of the projectile is called the range of the projectile. The range of the projectile depends on the object's initial velocity.
h (max) = [tex]u^{2}[/tex] [tex]sin^{2}[/tex](theta) / 2g
given
theta = 35°
Maximum height = 4. 6 m.
u = ?
4.6 = [tex]u^{2}[/tex] * [tex]sin^{2}[/tex](35) / 2* 9.8
u = 16.66 m/s
To learn more about projectile motion here
https://brainly.com/question/11049671
#SPJ4
A stone that is thrown vertically upwards was having a velocity of 15m/s after reaches 2/3 of its maximum height. What is the maximum height that can be reached by the stone?
A. 9.8m
B. 11.5m
C. 22.9m
D. 34.4m
The correct answer is option B. The maximum height that can be reached by the stone is determined as 11.5 m.
Maximum height attained by the stoneThe maximum height attained by the stone when it is a 2/3 of its total height is calculated as follows;
v² = u² - 2gh
where;
v is final velocity at maximum height, v = 0u is initial velocityg is acceleration due to gravity0 = u² - 2gh
2gh = u²
h = u²/2g
h = (15²)/(2 x 9.8)
h = 11.48 m
h = 11.5 m
Thus, the maximum height that can be reached by the stone is determined as 11.5 m
Learn more about maximum height here: https://brainly.com/question/12446886
#SPJ1
What is the free energy of activation of a one-step reaction? how is it qualitatively related to the rate constant of the reaction?
Learn more about free energy here:
https://brainly.com/question/14562388
#SPJ4
Find the distance traveled by a particle with position (x, y) as t varies in the given time interval. x = 2 sin2(t), y = 2 cos2(t), 0 ≤ t ≤ 4
The distance traveled by the particle at the given time interval is 0.28 m.
Position of the particle at time, t = 0
The position of the particle at the given time is calculated as follows;
x = 2 sin2(t)
y = 2 cos2(t)
x(0) = 2 sin2(0) = 0
y(0) = 2 cos2(0) = 2(1) = 2
Position of the particle at time, t = 4x = 2 sin2(t)
y = 2 cos2(t)
x(4) = 2 sin2(4) = 0.28
y(4) = 2 cos2(4) = 2(1) = 1.98
Distance traveled by the particle at the given time intervald = √[(x₄ - x₀)² + (y₄ - y₀)²]
d = √[(0.28 - 0)² + (1.98 - 2)²]
d = 0.28 m
Thus, the distance traveled by the particle at the given time interval is 0.28 m.
Learn more about distance here: https://brainly.com/question/23848540
#SPJ1
(Repost) I need help with this physics question. Thanks in advance! Answer ASAP.
The time taken for the tiny saliva to travel is 0.55 second.
The horizontal distance traveled at speed of 4 m/s is 2.2 m.
The horizontal distance traveled at speed of 20 m/s is 11 m.
Time of motion of the tiny saliva
The time taken for the tiny saliva to travel is calculated as follows;
h = vt + ¹/₂gt²
where;
v is initial vertical velocity = 0g is the acceleration due to gravityh = 0 + ¹/₂gt²
h = ¹/₂gt²
2h = gt²
t² = 2h/g
t = √(2h/g)
Substitute the given parameters and solve for time of motion;
t = √(2 x 1.5 / 10)
t = 0.55 second
Horizontal distance traveled at speed of 4 m/sX = Vx(t)
X = (4 m/s)(0.55)
X = 2.2 m
Horizontal distance traveled at speed of 20 m/sX = (20)(0.55)
X = 11 m
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Which statement about nuclear fusion is correct? A. Two hydrogen electrons become protons during fusion. B. Helium nuclei can fuse to form elements such as nitrogen.
C. The fusion reaction lasts for several hundred years. D. Large nuclei break apart to form smaller nuclei.
Answer:
A is the answer
Explanation:
Yes, Two hydrogen electrons become protons during fusion.
By far, the most common fusion reaction in nature combines two hydrogen atoms to make a helium atom.
Answer:
B
Explanation:
A no
B Yes ....can fuse all the way up to making Iron
C no
D no .... the opposite
The aeroplane then continues at a CONSTANT VELOCITY for a further 800 m before leaving the runway. The length of the runway is 2 000 m. 8 m-s-1 1 .2 1.3 → Define the term vector. Convert 67 m-s¹ to km.h¹. 67 m-s¹ Calculate the: .3.1 3.2 1.3.3 3.4 30 s 800 m Acceleration of the aeroplane during the first 30 seconds Distance travelled by the aeroplane during the first 30 seconds Time taken by the aeroplane to travel the 800 m Length of the runway NOT USED when the aeroplane leaves the runway (2) (1 (4 (4 (3
800 = 0 + [tex]\frac{1}{2}[/tex]a(30)[tex]^{2}[/tex]
800 = 450a
a = 1.77m[tex]s^{-2}[/tex]
Distance = s = ut + [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]s = 0+ [tex]\frac{1}{2}[/tex]1.77[tex]t^{2}[/tex]
s = [tex]\frac{1}{2}[/tex]1.77(30)[tex]^{2}[/tex]
s = 796.5m
Time taken = distance / velocityt = 800/8
t = 100 sec
Length of the runway not used = total length of runway-total length covered before leaving runway2000 -800
length = 1200m
Learn more about distance here:
https://brainly.com/question/15172156
#SPJ1
50. a kangaroo can jump over an object 2.50 m high. (a) calculate its vertical speed when it leaves the ground. (b) how long is it in the air?
Answer:
The easiest way to do this is to realize that the time to fall is the same as the rise time (conservation of energy can easily verify this)
S = 1/2 g t^2 time to fall 2.5 m
t = (5 / 9.8)^1.2 = .714 sec time in air
v = a t = 9.8 * .714 = 7 m/s initial vertical speed
Check:
S = v t - 1/2 g t^2 where v is the initial vertical speed
S = 7 * .714 - 4.9 * .714^2 = 2.5 m total vertical distance traveled
Peripheral vision is the sharpness of your eyesight that is very important in driving a vehicle? true or false?
True.
Peripheral vision is very important in driving a vehicle.
What is peripheral vision?Peripheral vision is the area of your field of vision that is not directly in front of you. You can keep your eyes on what's in front of you while using peripheral vision to see when other automobiles are passing you. For example, peripheral vision can tell you when it's safe to cross a street, when a pedestrian is attempting to cross, or when you need to go to the car wash because a bird just peed on your window.
Peripheral vision works in conjunction with central vision to help you make informed driving decisions. You can spot potential dangers before they enter your field of vision by using your peripheral vision.
Learn more about peripheral vision here:
https://brainly.com/question/1566111
#SPJ4
What happens to heat energy when it is not increasing the temperature of the substance in the beaker? use your heating curve to explain your answer
When heat energy is not increasing the temperature of the substance in the beaker, the heating curve will start to increase and then flatten as it melts and is a solid with liquid.
What is Heating curve?This can be referred to as a type of graph which shows the relationship between the heating system supply temperature and the outside air temperature.
The heat energy not being able to increase the temperature is the reason why there will be solid present in the liquid. This is as a result of it not reaching its required melting point which is why all the substances aren't melted and is therefore the most appropriate choice.
Read more about Heating curve here https://brainly.com/question/14094062
#SPJ1
A ball is gently dropped from a height of 20 m onto a hard surface where it make an elas
1) Show that the speed of the ball just before hits the ground is 20m/s (g=10m/s2)
2) Why isn’t the accelera
3) Use axes below to sketch a graph of how the velocity of the ball varies with
several bounces
Answer:
20 m/s
Explanation:
Use the position/displacement formula to find out how long the ball is in the air:
(distance) = (initial velocity)*(time) + (1/2)*(acceleration)*(time)^2
20 = 0*t + 1/2*10*t^2
t^2 = 4
t = 2 seconds
Use the velocity formula:
(final velocity) = (initial velocity) + (acceleration)*(time)
Vf = 0 + 10*2
Vf = 20 m/s
The fixed assets turnover ratio of gd products is 13. 6 and that of its competitor, ap goods inc. , is 6. 0. what does this financial data primarily imply?
The correct answer is GD Products collects receivables more quickly than AP Goods.
Analysts typically utilize the fixed asset turnover ratio (FAT) to gauge operating performance. This efficiency ratio assesses a company's capacity to generate net sales from its fixed-asset investments, specifically property, plant, and equipment (PP&E). It compares net sales (income statement) to fixed assets (balance sheet) (PP&E). Utilized as a net of accumulated depreciation is the fixed asset balance. A greater fixed asset turnover ratio shows that a business has utilized fixed asset investments to drive sales effectively. A greater ratio suggests that management is making better use of its fixed assets. No information can be gleaned from a high FAT ratio about a company's capacity to produce reliable earnings or cash flows.
Learn more about investment here:-
https://brainly.com/question/15353704
#SPJ4
A 7.2 magnitude earthquake, with an epicenter in Northern Mexico, was felt over 100 miles away in Southern California because waves generated by earthquakes
A
do not require a medium to propagate.
B
travel away from the epicenter with no interference.
C
carry energy through Earth's crust.
D
can be measured on a Richter scale.
Answer:
B
because waves generated
What quantities determine the resistance of a piece of material? choose all that apply
The resistance depends upon the length, area and material of the material.Option (a), (b) and (c) is correct.
Quantities that determine the resistance:
The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area. Resistance also depends on the material of the conductor.
A conductor's or circuit element's resistance typically rises as temperature rises. Some conductors exhibit negligible resistance at very low cooling rates. Even after the electromotive force is removed from these substances, known as superconductors, currents still flow through them.The conductance, 1/R, is the reciprocal of resistance and is measured in reciprocal ohm units, or mho.
The complete question is:
What quantities determine the resistance of a piece of material? Choose all that apply.
a)The length of the piece of material
b)The cross-sectional area of the piece of material
c)The type of material
d)The voltage across the material
e)The current flowing through the piece of material
Learn more about Resistance here:
https://brainly.com/question/14547003
#SPJ4