Cyclic bromonium ion is the reactive intermediate that is formed in the reaction of an alkene with br2 and water. the correct answer is option(d).
A reactive intermediate is a highly reactive, high-energy, brief-lived molecule that, when produced in a chemical reaction, will swiftly transform into a stable molecule. They may occasionally be divided and stored. For instance, low temperatures and Matrix Isolation. Carbocations, carbanions, free radicals, carbenes, nitrenes, and benzyne are six different categories of reaction intermediates. These intermediaries are frequently produced when a chemical substance is chemically broken down.
Reactive intermediates can be used to explain the process of a chemical reaction. Reactive intermediates are high-energy, stable products that are present only in one of the intermediate phases of most chemical reactions, which typically involve more than one elementary step.
The complete question is:
What type of reactive intermediate is formed in the reaction of an alkene with Br2 and water to give a bromohydrin?
a.carbocation
b.carbanion
c.radical
d.cyclic bromonium ion
To know more about Reactive intermediates refer to: https://brainly.com/question/14994072
#SPJ4
The atmospheric layer in which gases do not maintain a uniform composition is the ________.
The layer of the earth's atmosphere in which gases do not maintain a uniform composition is the Heterosphere.
Heterosphere is simply the layer of an atmosphere in which the gases are split out according to molecular diffusion with an increase in altitude. Therefore, lighter species become more abundant than heavier species.The main components of the heterosphere are oxygen, helium, nitrogen, and hydrogen.
The lower layer is composed of nitrogen and oxygen.In the lower layers of the heterosphere, heavy molecules & atoms are present but lighter ones are present in the upper layer. According to Solar and temperature activities, the boundary between the molecules ranges. The heterosphere lies above the homosphere.
Learn more about the heterosphere: https://brainly.com/question/26417633
#SPJ4
Two gases are placed in a sealed flask and allowed to react. Which statement is true about the concentrations of the reactants and products when this closed system reaches dynamic equilibrium?
They will not necessarily be equal, but they will be constant.
What is dynamic equilibrium?In reversible reactions, dynamic equilibrium refers to a state in which the rate of the forward reaction is equal to that of the backward reaction.
Consdier the reaction below: A + B --> C + D
If the reaction is in dynamic equilibrium, the rate of formation of A and B will be the same as the rate of formation of C and D. However, this does not mean that the concentrations of the reactants and the products will be the same.
Since the rate of forward and backward reactions are equal, it means that the concentration of each of the species will be constant.
Thus, the above reaction is applicable to that of two reacting gases placed in a sealed flask and allowed to reach a dynamic equilibrium.
More on dynamic equilibrium can be found here: https://brainly.com/question/2363073
#SPJ1
They will be equal and constant. They will be equal but continuously changing. They will not necessarily be equal, and they will be continuously changing. They will not necessarily be equal, but they will be constant.
Identify the substance that conducts electricity. question 19 options: 1) nacl dissolved in water 2) solid nacl 3) solid sugar 4) sugar dissolved in water
The substance that conducts electricity is [tex]NaCl[/tex] dissolved in water.
So, option A is correct one.
When the sodium chloride dissolve in water , the sodium atoms and chlorine atoms separates under the presence of water molecules and exist as sodium cation and chloride anion . Now , they are free to move around in the water as positively and negatively charged ions . This separation of charge allows the solution to conduct electricity.
The solid [tex]NaCl[/tex] and solid sugar does not conduct electricity because it is not dissolve in water . Similarly, sugar dissolved in water does not conduct electricity .
to learn more about conduct electricity.
https://brainly.com/question/1458220
#SPJ4
How many fe(ii) ions are there in 20. 0 g of feso4 (molar mass=151. 9 g/mol) ? avogadro number=6. 0225x 1023
20 g of [tex]FeSO_4[/tex] contains [tex]7.94 \times 10^{22}[/tex] ions of [tex]Fe^2^+[/tex]
What is Mole?A mole is a unit to measure an amount of any substance which contains as many elementary particles as there in 12 g of Carbon 12.
A mole contains [tex]6.02214 \times 10^{23}[/tex] particles and this fixed number is called Avogadro’s number.
No. of moles is given by,
[tex]n =\frac{m}{M}[/tex]
where m = Given mass in grams
M = Molar mass
Here,
[tex]FeSO_4 \rightarrow Fe^2^+ + SO_4^2^-[/tex]
No. of moles of [tex]FeSO_4[/tex] = [tex]\frac{20g}{151.9gmol^-^1}[/tex] = 0.132 moles
No. of molecules of [tex]FeSO_4[/tex] = 0.132 x 6.022 x [tex]10^2^3[/tex] = 7.94 x [tex]10^2^2[/tex]
No. of molecules of [tex]FeSO_4[/tex] = no. of ions of [tex]Fe^2^+[/tex] = no of ions of [tex]SO_4^2^-[/tex]
Thus, no. of ions [tex]Fe^2^+[/tex] in 20 g of [tex]FeSO_4[/tex] is 7.94 x [tex]10^2^2[/tex]
Learn more about the mole concept:
https://brainly.com/question/20668126
#SPJ4
Why do you add hydroxide to your hexanediamine solution? what would occur if you did not add it?.
In order to react with the hydrochloric acid (HCl) created when the hexanediamine combines with the adiptic acid, NaOH was added to the hexanediamine solution. By combining with the HCl to create NaCl and water, the NaOH preserves the pH of the solution. HCl is taken out of the solution and the reaction is pushed in the direction of the products.
Hexanediamine solutionA C6 alkane-alpha, omega-diamine is hexanediamine. It serves as a xenobiotic metabolite for humans. It comes from a hydride.
Weight in Formula: 116.21Indication: 1,6-NH2(CH2)6NH2Risk Information: CorrosiveDensity: 0.854 (g/mL).Heat of Boiling (°C): 205Temp. Freeze (°C): 39–42Water and Alcohol Are Both Slightly SolubilizedSynonyms include 1,6-diaminohexane and hexamethyleneediamine.Shelf Life: 36 monthsWhat is the purpose of hexanediamine?
Hexanediamine is mostly used to make adhesive resins, resins for paper manufacturing, resins for water treatment, and unaltered resins. Hexanediamine is only used in industrial products; it is unlikely that consumers will come into touch with it.learn more about hexanediamine solution here
https://brainly.com/question/17112756
#SPJ4
What type of bond will typically form between boron and hydrogen based on their electronegativity?
The type of bond will typically form between boron and hydrogen based is boron-hydrogen-boron bridge bond also known as 3 centered two electron bond on the basis of their electronegativity.
What is electronegativity?Electronegativity is a tendency or chances of an element to accepts the single electron from any atom not only the lone pair of electrons.
Fluorine is smallest and the highly electronegative element of the periodic table after that oxygen is also an electronegative element after that nitrogen.
Therefore, it is known as 3 centered two electron bond on the basis of their electronegativity.
Learn more about electronegativity, here :
https://brainly.com/question/2060520
#SPJ4
As filtrate moves down the loop of henle, the surrounding interstitial fluid becomes _____ concentrated than the filtrate, so _____ leaves the filtrate.
As filtrate moves down the loop of Henle, the surrounding interstitial fluid becomes more concentrated than the filtrate, so water leaves the filtrate.
A gas at constant volume has a pressure of 4. 50 atm at 200k. What will be the pressure of the gas at 250k?
There will be 5.625 atm pressure of the gas at 250 K when a gas at constant volume has a pressure of 4. 50 atm at 200 K
According to gas law at constant volume the pressure of a given gas is directly proportional to the kelvin temperature .
[tex]P_{1} =T_{1}[/tex] (i)
[tex]P_{2} = T_{2}[/tex] (ii)
Where P and T is the pressure and temperature
Divide equation ( i ) by equation ( ii ) we get
[tex]P_{1}/P_{2}[/tex] = [tex]T_{1}/T_{2}[/tex]
Now putting the value of all given data in above final equation then we get.
4. 50 atm/[tex]P_{2}[/tex] = 200K/250K
[tex]P_{2}[/tex] = 4. 50 atm × 250K/ 200K = 5.625 atm
To learn more about gas law
https://brainly.com/question/12669509
#SPJ4
What is the electron configuration of a potassium ion when it has formed an ionic bond with a bromine ion?
[2.8.2] - exists the electron configuration of a potassium ion when it contains created an ionic bond with a bromine ion.
What is electron configuration simple definition?
electronic configuration, also called electronic structure or electron configuration, the arrangement of electrons in orbitals around an atomic nucleus.
What are the 4 types of electron configuration?
The four different types of orbitals (s,p,d, and f) have different shapes, and one orbital can hold a maximum of two electrons. The p, d, and f orbitals have different sublevels, thus can hold more electrons. As stated, the electron configuration of each element is unique to its position on the periodic table.Learn more about electron configuration
brainly.com/question/13497372
#SPJ4
5.04 Discussion: Reaction-Rate Factors
Discuss with your classmates your investigation about reaction-rate factors.
Describe how you conducted your experiment, and explain how you reached your conclusion.
Evaluate your investigation, and describe some ways that you could modify your investigation.
Respond to your classmates' experimental designs and conclusions. Do they support their conclusions with evidence?
Increasing the surface area of the reactant by pelletizing the calcium carbonate, and increasing the concentration of hydrochloric acid resulted in increase in the rate of reaction.
What is reaction rate?Reaction rate refers to the rate at which reactant molecules are consumed or the rate at which product molecules are formed.
The factors that affect reaction rate include:
TemperatureConcentrationSurface area of reactantsNature of reactantsPresence of catalystsGiven an experiment to determine effect of surface area of reactants and concentration on reaction rate of dilute hydrochloric acid and calcium carbonate:
It was observed that increasing the surface area of the reactant by pelletizing the calcium carbonate and increasing the concentration of hydrochloric acid made the reaction proceed faster.
In conclusion, reaction rate increases with increase in surface area.
Learn more about factors affecting reaction rate at: https://brainly.com/question/14817541
#SPJ1
What two properties (one chemical and one physical) combine to make bromcresol green useful as an acidity indicator?
Two properties are :
Bromcresol green is useful as an acidity indicator because it changes to yellow as the pH becomes more acidic
Also, the bromcresol green protons are easily dissociated making the color change visible and relatively quick.
Why is bromocresol green used as an indicator?
Bromocresol green (BCG) is a dye of the triphenyl methane family (triarylmethane dyes). It belongs to a class of dyes called sulfonephthaleins. It is used as a pH indicator in applications such as growth mediums for microorganisms and titrations.
How does a pH indicator work?
pH indicators detect the presence of H+ and OH-. They do this by reacting with H+ and OH-: they are themselves weak acids and bases. If an indicator is a weak acid and is colored and its conjugate base has a different color, deprotonation causes a color change.
What is chemical change and physical change?
Physical changes are reversible and do not produce a new substance. Chemical changes result in the production of a new substance and cannot be reversed.
Learn more about pH Indicators :
brainly.com/question/27648332
#SPJ4
A spherical balloon is inflating with helium at a rate of 48π ft3 min. How fast is the balloon's radius increasing at the instant the radius is 2 ft?
Answer:
Explanation:.
A radioactive isotope of potassium (K) has a half-life of 20 minutes. If a 255 gram sample of this isotope is allowed to decay for 80 minutes, how many grams of the radioactive isotope will remain? nd the O a. 8.0 0 b. 63.8 O c. 15.9 0 d 319
Answer:
15.94 g
Explanation:
80 mins is 4 half lives ( 20 min each)
255 * 1/2 * 1/2 * 1/2 * 1/2 = 255 * 1/2^4 = 15.94 g
Sodium has a density of 0.968 g/cm3 and crystallizes with a body-centered cubic unit cell. Part A Calculate the radius of a sodium atom.
The radius of a sodium atom is determined as 2.145 x 10⁻⁸ cm.
What is body-centered cubic unit cell?
Body-centered cubic (BCC) is the name given to a type of atom arrangement found in nature.
A body-centered cubic unit cell structure consists of atoms arranged in a cube where each corner of the cube shares an atom and with one atom positioned at the center.
Volume of the sodium atomThe volume of the sodium atom is calculated as follows;
V = ZM/Nρ
where;
Z is 2 for a body-centered cubic unit cellM is mass of sodium atom = 23 g/molρ is density of sodium atomN is Avogadro's numberV = (2 x 23) / (6.023 x 10²³ x 0.968)
V = 7.89 x 10⁻²³ cm³
Edge length of the unit cella = (V)^¹/₃
a = (7.89 x 10⁻²³ cm³)^¹/₃
a = 4.29 x 10⁻⁸ cm
Radius of the unit cellr = a/2
r = ( 4.29 x 10⁻⁸ cm) / 2
r = 2.145 x 10⁻⁸ cm
Thus, the radius of a sodium atom is determined as 2.145 x 10⁻⁸ cm.
Learn more about sodium atom here: https://brainly.com/question/25033306
#SPJ1
What is the equilibrium expression for
2SO3(g) 0₂(g) +2SO₂(g)
Answer:
[tex]K_{c} =\frac{[O_{2} ] [SO_{2} ]^{2} }{[SO_{3} ]^{2} }[/tex]
Explanation:
To construct the equilibrium constant, you need the balanced equation:
2 SO₃(g) -----> O₂(g) + 2 SO₂(g)
The equilibrium constant compares the concentrations of the products and the reactants.
The given expression follows this structure:
aA(g) ----> bB(g) + cC(g)
In this equation, the uppercase letters symbolize the molecules and the lowercase letters symbolize their corresponding coefficients in the balanced equation.
The general equilibrium expression looks like this:
[tex]K_{c} =\frac{[B]^{b} [C]^{c} }{[A]^{a} }[/tex]
To be clear, the concentrations in the numerator represent the gaseous products and the concentrations in the denominator represent the gaseous reactants.
Therefore, the equilibrium expression for this equation is:
[tex]K_{c} =\frac{[O_{2} ] [SO_{2} ]^{2} }{[SO_{3} ]^{2} }[/tex]
In state n = 1, the energy of the hydrogen atom is -13. 58 ev. what is its energy in state n = 2?
In state n = 1, the energy of the hydrogen atom is -13. 58 ev, then the energy in state n = 2 is -3.40eV.
For an electron located in an inner orbit to jump an upper orbit, it needs an energy equal to the difference between the two quantized orbits. This energy comes from the absorption of a photon with the same energy required. The formula for the energy levels of a Hydrogen atom is:
En = E/(n×n)
where E is the energy of the ground state and n is the energy level or state. Then the energy in n= 1 is
En = -13. 58/ 4
En = -3. 40eV
Thus, we find the value of energy of hydrogen atom in n=2 is -3. 40eV.
learn more about energy state:
https://brainly.com/question/13155289
#SPJ4
An element with the general electron configuration for its outermost electrons of ns2np1 would be in which element group?
Electron configuration is the electron distribution in the molecular and atomic orbital. An element with configuration ns²np¹ will be in the 3A group. Thus, option B is correct.
What is electronic configuration?The electronic configuration has been the arrangement and distribution of the sub-atomic particle, an electron in the atomic shells.
The electronic configuration given is, ns²np¹. Here, there are three valence electrons in the outermost orbit. As it has been known that the number of the valence electron gives the number of the group.
Therefore, option B. 3A group or 13 group is the correct option.
Learn more about electronic configuration here:
https://brainly.com/question/11182760
#SPJ4
Your question is incomplete, but most probably your full question was, An element with the general electron configuration for its outermost electrons of ns2np1 would be in which group?
a. 2a
b. 3a
c. 4a
d. 5a
e. 8a
For the energy diagram of the chemical reaction depicted here, which statement is the best conclusion?
The reaction is endothermic.
The reaction is endothermic.
The reaction will proceed without the input of energy.
The reaction will proceed without the input of energy.
The reaction is exothermic.
The reaction is exothermic.
The activation energy is not represented on the graph.
The reaction shown here is an exothermic reaction.
What is an exothermic reaction?An exothermic reaction is one in which the energy of the reactants is greater than the energy of the products. This implies that energy is given out in the process. Whether a reaction is endothermic or exothermic shows in the nature of the reaction profile curve.
For an endothermic reaction, the part of the diagram that represents the energy of the products is higher than the part that represents the energy of the reactants. This is clear from the image attached here.
If we look at the reaction graph very well, we will observe that the energy of the reactants is far above that of the products. Thus it follows that the reaction shown here is an exothermic reaction.
Learn more about exothermic reaction:https://brainly.com/question/15765092
#SPJ1
The _____ property allows the positioning of an element to the right or left of other elements.
Answer:
can u show the answer it give you for the question
The float property allows the positioning of an element to the right or left of other elements.
In the context of web development and CSS, the "float" property is used to control the positioning of elements within a container. It allows you to move an element to the left or right of its containing element, enabling other elements to flow around it.
When an element is floated, it is taken out of the normal flow of the document, allowing other elements to wrap around it. This can be particularly useful for creating layouts where you want elements to appear side by side or to create text flow around images.
The "float" property can take one of two values: "left" or "right". When an element is set to "float: left", it will move to the left of its containing element, and any subsequent elements will wrap around it on the right side. Conversely, when set to "float: right", the element will move to the right, and subsequent elements will wrap around it on the left side.
Learn more about web development from the link given below.
https://brainly.com/question/30403203
#SPJ2
The average rate of a reaction is a good approximation of an instantaneous rate when?
The average rate of a reaction is a good approximation of an instantaneous rate when the concentration is measured during relatively brief time intervals.
At any point during such a little period, the average rate will be extremely near to the instantaneous rate. The average rate will differ from the instantaneous rates inside the period more when time intervals are longer.
The concentration change during a chosen time period is the average rate. When you take the measurements makes a difference.
The rate at a specific moment is known as the instantaneous rate. Finding the slope of the tangent to the concentration vs. time curve at that point yields the answer.
Learn more about comparison between average and instantaneous rate here https://brainly.com/question/17960561
#SPJ4
A solution containing a buffer has an initial ph of 8.78. If a student adds 5 drops of hcl(aq) to this solution. What would be a reasonable ph for the resulting solution?
Buffer is a solution that has been known to have an acid and base dissolved with constant hydrogen concentration. If 5 drops of HCl are added to the buffer then the final pH will be 8.64. Thus, option a is correct.
What is pH?pH has been the concentration that is made of hydrogen or proton ions. The ions have been known to be released from the acids while the bases release the hydroxide ions.
The given buffer has a pH of 8.78, and hence, it is a basic buffer. If the solution of HCl (strong acid) is added to this buffer then the pH will decrease definitely. As only 5 drops are added there will be not much decrease in the pH.
Therefore, option a. the pH of the buffer after addition to HCl will be 8.64.
Learn more about buffers and pH here:
https://brainly.com/question/17878969
#SPJ4
Your question is incomplete, but most probably your full question was, A solution containing a buffer has an initial pH of 8.78. If a student adds 5 drops of HCl(aq) to this solution. What would be a reasonable pH for the resulting solution?
8.648.787.008.895.22To prevent the system refrigerant from quickly dropping in temperature and pressure, refrigerant recovery should?
To prevent the system refrigerant from quickly dropping in temperature and pressure, refrigerant recovery should Begin with a liquid
In the refrigeration cycle of air conditioners and heat pumps, refrigerants are working fluids that typically go through numerous phase changes from a liquid to a gas and back again.
In the refrigeration cycle, which cools a place, a refrigerant is a material, frequently a fluid. Refrigerants use the thermodynamic phenomenon of phase transitions, in which a fluid transforms into a gas or vice versa, to absorb heat and then release it to another area.
At room temperature, it is often a gas. Ammonia, sulfur dioxide, and non-halogenated hydrocarbons like propane are further typical refrigerants that are employed in a variety of applications.
To learn more about Refrigerants please visit -
https://brainly.com/question/13002119
#SPJ4
Heliox is a mixture of helium and oxygen gas used to help patients with breathing difficulties. It is also used for scuba diving. The total pressure in a tank of heliox is 208 atm. If the mole fraction of o2 is 0. 220, what is the partial pressure of he in the tank?.
It should be noticed that the mole fraction of all the system's components is 1.
Describe a mole fraction.the proportion between the moles of one component in a solution or other combination and the total moles of all the components.
What is a mole fraction and an illustration of one?In a mixture, a mole fraction is the ratio of molecules of one component. By way of illustration, if the mole fraction of methane in a gas is 0.90, then this implies that 90% of the molecules are methane. Since the amount fractions resemble mole fractions, methane makes up an additional 90% of the mixture.
The mole fraction is calculated in what way?By dividing the solute's moles by all the other molecules in solution, you may determine the solute's mole fraction.
learn more about mole fraction here
https://brainly.com/question/20343503
#SPJ4
What is the molar mass of a gas if a flask with a volume of 3. 16 l contains 9. 33 grams of the gas at 32. 0°c and 1. 00 atm?
The molar mass of a gas if a flask with a volume of 3. 16 L contains 9. 33 grams of the gas at 32. 0°C and 1. 00 atm is 1.17g/mol
Calculation ,
In this question we have to fist find the number of moles of gas by using ideal gas equation and from the help of number of moles we can determine molar mass.
According to ideal gas equation which is also known as ideal law ,
PV = nRT ...( i )
where P is the pressure of the gas = 1 atm
V is the volume of the gas in the flask with volume = 3. 16 L
R is the universal gas constant = 0.082 atm L/K mol
T is the temperature = 32. 0°C = 32 + 273 = 305 K
n is the number of moles = ?
Putting the value of Pressure P , volume V , temperature T , number of moles n and universal gas constant R in the equation (i) we get ,
1 atm ×3. 16 L = n× 0.082 atm L/K mol ×305 K
n = 1 atm ×3. 16 L / 0.082 atm L/K mol × 305 K = 0.126 mole
number of mole of a gas = 0.126 mole = given mass/ molar mass
molar mass = number of moles × Given mass = 0.126 × 9. 33 = 1.17g/mol
Learn about flask
https://brainly.com/question/14161066
#SPJ4
What does the duct calculator tell a technician about static pressure and airflow?
Answer:
It displays the static pressure loss over a length of 100 feet for a specific duct size and airflow.
What is a ductulator?People who work in the HVAC and construction industries use ductulators to size the ductwork in mechanical systems. It enables you to select the volumetric flow rate after selecting the static pressure you wish to keep in the duct. The ductulator offers you a wide range of rectangular duct diameters that will create this when you enter those criteria. It also displays the required diameter for a circular duct. The actual instrument is constructed of sturdy, thick paper, and it contains a rotating piece that lets you select the two settings I previously indicated.
I’ll mark u brainliest!!
What happened to the molecule when the electron was promoted to the antibonding orbital?.
the bond will break
The bond will dissolve (break) if the electron absorbs a photon and is moved from a bonding molecular orbital to an antibonding orbital since there is no longer an overall stabilizing interaction.
What is an antibonding orbital?An antibonding molecular orbital is the molecular orbital created by the destructive overlapping of atomic orbitals.
Why is it called antibonding orbital?Every atom will add one electron to the bond that makes up the lower energy bond. To prevent interacting with the other two electrons, the additional electron will occupy a higher energy state. The antibonding orbital is the name of this higher energy orbital.What orbitals form an antibond?The bonding orbitals are home to electrons that spend the majority of their time between the nuclei of two atoms, whereas the antibonding orbitals are home to electrons that spend the majority of their time outside the nuclei of two atoms.When an electron was elevated to the antibonding orbital, what happened?In contrast, putting electrons in antibonding orbitals will make the molecule less stable. The energy levels of the orbitals will determine how many electrons are filled. The lower energy orbitals will be filled first, and then the higher energy orbitals.To learn more about antibonding orbitals visit:
https://brainly.com/question/17303393
#SPJ4
What is the ph of a 2. 3 m solution of the weak acid h2s, with a ka of 1. 19×10−7? the equilibrium expression is: h2s(aq) h2o(l)⇋h3o (aq) hs−(aq)
The equilibrium expression is:
H2S (aq) + H2O (l) ⇋ H3O (aq) + HS (aq)
In order to calculate the pH of equation having aqueous solution of weak acid H2S, let’s assume that molar concentration of the products H3O and HS total released is ‘a’. Now as per given information concentration of weak acid H2S is 2.3 M. Thereby,
Ka = [H3O+] [HS] / [H2S]
1.19 x 10-7 = [a] * [a] / [2.3]
a2 = 1.19 x 10-7 x 2.3
a = 5.24 x 10-4
As per the calculation, the total concentration of the products released (HS) and (H3O) will be 5.24 x 10-4, on that basis, the pH of the weak acid (H2S) can be calculated as follows:
-log (0.000522494) = 3.28
To know more about the pH calculation:
https://brainly.com/question/13105728
#SPJ1
Suppose that 0.50 grams of barium-131 are administered orally to a patient. Approximately how many milligrams of the barium would still be radioactive two months later?
Two months later 13.8 milligrams of the barium-131 still be radioactive.
How is the decay rate of a radioactive substance expressed ?It is expressed as:
[tex]A = A_{0} \times (\frac{1}{2})^{t/T}[/tex]
where,
A = Amount remaining
A₀ = Initial Amount
t = time
T = Half life
Here
A₀ = 0.50g
t = 2 months = 60 days
T = 11.6 days
Now put the values in above expression we get
[tex]A = A_{0} \times (\frac{1}{2})^{t/T}[/tex]
[tex]= 0.50 \times (\frac{1}{2})^{60/11.6}[/tex]
[tex]= 0.50 \times (\frac{1}{2})^{5.17}[/tex]
= 0.50 × 0.0277
= 0.0138 g
= 13.8 mg [1 mg = 1000 g]
Thus from the above conclusion we can say that Two months later 13.8 milligrams of the barium-131 still be radioactive.
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: Suppose that 0.50 grams of ban that 0.50 grams of barium-131 are administered orally to a patient. Approximately many milligrams of the barium would still be radioactive two months later? The half-life of barium-131 is 11.6 days.
Learn more about the Radioactive here: https://brainly.com/question/2320811
#SPJ1
List the procedural steps, from start to finish, that are required to convert 2‑naphthol and allyl bromide into allyl 2‑naphthyl ether.
Catalysis is the process of boosting the pace of a chemical reaction by using a catalyst. Catalysts are not consumed in the reaction and so survive it.
To learn more about catalysis from the given link
https://brainly.com/question/1372992
#SPJ4