Agar is used to assist establish an anaerobic environment that promotes nitrate reduction.
Nitrate Reduction test:
The nitrate in the broth is converted to nitrite by organisms that can produce the nitrate reductase enzyme, which can then be further converted to nitric oxide, nitrous oxide, or nitrogen. Anaerobic respiration and denitrification are two processes that can convert nitrate to a variety of compounds. While denitrification only reduces nitrate to molecular nitrogen, anaerobic respiration employs nitrate as the bacterium's final electron acceptor, reducing it to a range of chemicals.The nitrate reduction test is based on the detection of nitrite and its capacity to produce a red precipitate (prontosil), which is a water-soluble azo dye, when it combines with sulfanilic acid to create a complex (nitrite-sulfanilic acid).Learn more about the Nitrate reduction test with the help of the given link:
https://brainly.com/question/11181586
#SPJ4
2.04 thermal and chemical change
Explanation:
thermal changes are those in which heat exchange is involved like endothermic and exothermic
while in chemical changes collision between the reactant occurs which result into product
Atoms and molecules are way too small to be seen even with a microscope so how can we count how many there are?
Atoms and molecules are way too small to be seen even with a microscope so it can be counted by mass.
According to the context, the term actually may or may not encompass ions that meet this requirement. A molecule would be a collection of more than two atoms held together through attractive forces described as chemical bonds.
Atoms are incredibly tiny, with a diameter of around 1 x [tex]10^{-10}[/tex] meters. They can't be seen with a light microscope due to their small size. The composition of atoms can be observed and studied using a variety of ways, even if a light microscope might not be able to see one atom.
Therefore, atoms and molecules are way too small to be seen even with a microscope so it can be counted by mass.
To know more about molecules
https://brainly.com/question/19922822
#SPJ4
If 24. 7 g of barium chloride reacts with excess sodium sulfate, how many grams of sodium chloride will be produced
6.9 g of sodium chloride will be produced.
Antoine Lavoisier discovered in 1789 that mass is neither created nor destroyed in chemical reactions, which led to the formulation of the Law of Conservation of Mass. That is to say, the mass of any one element at the start of a reaction will be equal to that element's mass at the conclusion of the reaction.
The total mass of the reactants and products are equal under the principle of conservation of mass.
BaCl₂ + Na₂SO₄ => BaSO₄ + 2NaCl
Molecular weight of BaCl₂ = 137 + 35.5 × 2
= 208 g/mole
Molecular weight of NaCl = 22.99 + 35.45
= 58.44 g/mole
208 g/mol BaCl₂ produces 58.44 g/mole NaCl.
1 g/mol BaCl₂ produces (58.44 / 208) g/mole NaCl.
24.7 g BaCl₂ produces (58.44 / 208) × 24.7 g NaCl
= 6.9 g NaCl
Therefore, 6.9g of sodium chloride will be produced.
Learn more about conservation of mass here:
https://brainly.com/question/19038178
#SPJ4
Consider the Diels-Alder reaction of anthracene and maleic anhydride. What is the role of each of the reactants
The role of each of the reactants are:
The o=benzene (extra line+C)=o acts as the [Dienophile]The three benzene rings acts as the [diene]What is the Diels-Alder reaction?
The Diels–Alder reaction is known to be a kind of reaction that is said to exist between what we call a conjugated diene and that of an alkene (dienophile).
Note that the union of both leads to a unsaturated six-membered rings and because the reaction is one that entails the formation of a cyclic product through what we call a cyclic transition state, it is said to be known as a "cycloaddition".
Note that from the experiment, The role of each of the reactants are:
The o=benzene (extra line+C)=o acts as the [Dienophile]The three benzene rings acts as the [diene]Learn more about Diels-Alder reaction from
https://brainly.com/question/14496475
#SPJ1
Identify atleast 2 limitations of the simulation. how do these limitations influence the simulation
Which method is used for synthesis of ammonia?
The Haber-Bosch process
The dominant ammonia production process is the Haber-Bosch process invented in 1904 which requires high temperature (~500°C) and high pressure (150–300 bar), in addition to efficient catalysts3,4. Natural gas or coal is used as the energy source of the ammonia industry.Learn more about synthesis of ammonia
brainly.com/question/8869780
#SPJ4
3.0 mol Na reacts with 1.4 mol F2 according to the equation below:
2Na+F2= 2NaF
How many moles of NaF form from 1.4 mol F2?
Taking into account the reaction stoichiometry, 2.8 moles of NaF are formed when 3.0 mol Na reacts with 1.4 mol F₂.
Reaction stoichiometryIn first place, the balanced reaction is:
2 Na + F₂ → 2 NaF
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Na: 2 molesF₂: 1 mole2 NaF: 2 molesLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 2 moles of Na reacts with 1 mole of F₂, 3 moles of Na reacts with how many moles of F₂?
[tex]amount of moles of F_{2} =\frac{3 moles of Nax 1 moles of F_{2}}{2 moles of Na}[/tex]
amount of moles of F₂= 1.5 moles
But 1.4 moles of F₂ are not available, 1.4 moles are available. Since you have less moles than you need to react with 3 moles of Na, F₂ will be the limiting reagent.
Mass of NaF formedThe following rule of three can be applied: if by reaction stoichiometry 1 mole of F₂ form 2 moles of NaF, 1.4 moles of F₂ form how much mass of NaF?
[tex]moles of NaF=\frac{1.4 moles of F_{2}x2 moles of NaF }{1 mole of F_{2} }[/tex]
moles of NaF= 2.8 moles
Then, 2.8 moles of NaF are formed when 3.0 mol Na reacts with 1.4 mol F₂.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
If 2. 0 x 1023 argon {ar) atoms strike 4. 0 cm2 of wall per second at a 90° angle to the wall when moving with a speed of 45,000 cm s-1, what pressure {in atm) do they exert on the wall?
If 2. 0 x 1023 argon {Ar) atoms strike 4. 0 [tex]cm^{2}[/tex] of wall per second at a 90° angle to the wall when moving with a speed of 45,000 [tex]cm^{-1}[/tex].The pressure will be 0.295 atm.
The force delivered perpendicularly to an object's surface per unit area across which that force would be dispersed is known as pressure. In comparison to the surrounding pressure, gauge pressure defines the pressure. The units was using to express pressure vary.
Calculation of force:
Force excerted by the Ar atoms, (F) = Change in momentum for one Ar atom 7 / unit time × number of atom
F = 2mv /1s × number of atoms.
Putting the given data in above equation.
F = 2 × 39.95 amu × 450 m/s/ 1s × 1.66 × [tex]10^{-27}[/tex] kg /amu × 2 × [tex]10^{23}[/tex] atom
F = 11.94 N
Now, pressure can be calculated by using the formula:
P = Force exerted /area
P = 11.94 N/ 4.0 [tex]cm^{2}[/tex] × [tex]cm^{2}[/tex]/ [tex]10^{-4} m^{2}[/tex]
P = 0.295 atm
Therefore, the pressure will be 0.295 atm.
To know more about pressure
https://brainly.com/question/12971272
#SPJ4
Identify oxidation. increase in oxidation number. loss of electrons. decrease in oxidation number. gain of electrons
Oxidation is "increase in oxidation number".
A growth in oxidation number results from the losing of negatively charged electrons, whereas a reduction in oxidation number results from the gain of electrons. The result is just a rise in the oxidation number of the oxidized element and ion.
The elements in molecules and compounds were rearranged to create the products when there is a chemical reaction at the molecular level, which is where chemical changes take place. One type of chemical change is called oxidation.
Therefore, Oxidation is increase in oxidation number.
To know more about Oxidation
https://brainly.com/question/16976470
#SPJ4
What are the hybridization states of the carbon atoms involved in the conversion of trans to cis retinal?
The hybridization states of the carbon atoms involved in the conversion of trans to cis retinal is sp2.
What is Hybridization?
In the process of hybridization, the orbitals of different elements come together to create new orbitals for the atoms. The only characteristics that distinguish the new orbitals from the old orbitals are their energy and shape. It is used to learn about the various bond types, bond lengths, and bond energies that an element may produce.Cis to trans conversion takes place between the double-bonded carbons. Tetrahedral carbons in a single bond are designated as sp3, trigonal planar carbons in a double bond are designated as sp2, and linear carbons are designated as sp.Learn more about the Hybridization of carbon with the help of the given link:
https://brainly.com/question/6986666
#SPJ4
An ideal reversible heat pump is taking heat from the outside air at -14.0°c and discharging it into the house at 20.0°c. what is the coefficient of performance of this heat pump?
the coefficient of performance of this heat pump is 8.61.
What is Heat pump ?
The air source heat pump converts heat from the ambient air into a low-temperature liquid refrigerant. The pump compresses the liquid to raise its temperature using power. To release the heat it had been holding, it then condenses back into a liquid. Your underfloor heating system or radiators get heat.
coefficient of performance -The usable heating or cooling delivered to work (energy) needed ratio, also known as the coefficient of performance, or COP, of a heat pump, refrigerator, or air conditioning system. Higher efficiency, less energy (power) usage, and thus reduced operational costs are all related to higher COPs.
temperature of cold reservoir = -14.0°C
Tc = [ 273+ (-14.0)]K = 259K
temperature of hot reservoir = 20°C
Th = [ 273+ (20)]K = 293K
therefor, formula for coefficient of performance
Cop = Th/Th-Tc
Cop = 293/34
Cop = 8.61
to learn more about heat pump go to - https://brainly.com/question/3150928
#SPJ4
Calculate the standard potential, ∘, for this reaction from its δ∘ value. x(s) y2 (aq)⟶x2 (aq) y(s)δ∘=−61. 0 kj
The equilibrium potential and the standard free energy change can give the standard potential of the electrodes. The standard cell potential is 0.32 V.
What is standard free energy change?A reaction's standard free energy change (∆Gº') is the energy produced when the reactants undergo changes to form the product. It is given as,
ΔG° = -nFE° cell
Given,
Standard free energy change (ΔG°) = − 61. 0 kJ
Number of moles of electrons (n) = 2
Faraday's constant (F) = 96500 C
The standard cell potential (E° cell) is calculated as:
E° cell = ΔG° ÷ -nF
E° cell = − 61000 ÷ -(2 × 96500)
E° cell = 61000 ÷ 193000
= 0.32 V
Therefore, 0.32 V is the standard cell potential of the cell.
Learn more about standard free energy change here:
https://brainly.com/question/15124690
#SPJ4
A 1. 30-g sample of an unknown gas occupies 798 ml at 25. 0°Cand a pressure of 1. 00 atm. Find the molar mass of the gas.
A 1. 30-g sample of an unknown gas occupies 798 ml at 25. 0°C and a pressure of 1. 00 atm the the molar mass of the gas is
Calculation ,
According to ideal gas equation ,
PV = nRT ....(i)
where P is the pressure = 1atm
V is the volume of the unknown gas = 798 ml = 0.798 L
R is the universal gas constant = 0.082 atm L /K mol
T is the temperature of the gas = 25 °C = 298 K
n is the number of moles = ?
By putting the value of pressure , volume , temperature and universal gas constant in equation ( i) we get
1 atm ×0.798 L = n×0.082×298
n = 1 atm ×0.798 L/0.082×298 = 0.0326 mole
Number of moles (n) = given mass/ molar mass
molar mass = given mass/number of moles = 1. 30 g/0.0326 mole
molar mass = 39.87 g/mol
To learn more about molar mass please click here ,
https://brainly.com/question/12127540
#SPJ4
A local plant nursery uses large sprinklers to water the plants twice a day. the water contains phosphorus, which is a fertilizer that helps plants grow. some of the water becomes runoff and ends up in nearby streams and lakes. this is an example of which type of short-term human-induced environmental change? eutrophication non-sustainable harvesting nonnative species introduction deforestation
Eutrophication
In an aged aquatic habitat like a lake, eutrophication is the progressive rise in the concentration of phosphorus, nitrogen, and other plant nutrients. As the volume of organic matter that can be converted into nutrients increases, the productivity or fertility of such an ecosystem also naturally rises.
What is Eutrophication ?Eutrophication may be caused by a number of things, including overuse of fertilisers, untreated sewage, the use of phosphorous-containing detergents, and industrial waste discharge.
Eutrophication naturally. Natural eutrophication is a process that develops in water resources over a very long period of time as a result of a slow buildup of nutrients and organic waste. Anthropogenic or cultural eutrophication.Learn more about Eutrophication here:
https://brainly.com/question/26956972
#SPJ4
How many moles of iron atoms are obtained from 320kg of iron oxide
Answer: 4010 mol of iron atoms
Explanation:
Given Information
Iron Oxide = Fe₂O₃
Mass = 320 kg
Given atomic mass / molecular weight
Fe = 55.8 g / mol
O = 16.0 g / mol
Fe₂O₃ = 55.8 × 2 + 16.0 × 3 = 159.6 g / mol
Given formula
n = m / M
n = number of molesm = massM = molecular weightConvert the unit of mass to Gram
1 kg = 1000 g
320 kg = 320 × 1000 = 320 000 g
Substitute values into the given formula
n = m / M
n = (320000) / (159.6)
n ≈ 2005 mol of Fe₂O₃
Calculate the number of moles of Fe (Iron atoms)
Since each mole of Fe₂O₃ has 2 moles of Fe, then:
2005 × 2 =[tex]\Large\boxed{4010~mol~of~Fe}[/tex]
Hope this helps!! :)
Please let me know if you have any questions
Which of the following factors would reduce the yield of a reaction?
A. The reaction produces a large quantity of heat.
B. The products are more stable than the reactants.
C. The reaction may be reversible.
D. The reaction occurs very quickly.
The products being more stable than the reactants is the factor which would reduce the yield of a reaction and is denoted as option B under standard conditions.
What is a Chemical reaction?This is the process in which one or more substances which are referred to as reactants are converted into new substances which we call the products.
A chemical reaction involves atoms exhibiting different bond formation so as to ensure they acquire an octet configuration and promotes proper stability of the products.
When the products are more stable than the reactants it means it is unable to form other products thereby decreasing the yield which is why it was chosen as the most appropriate choice.
Read more about Chemical reaction here https://brainly.com/question/11231920
#SPJ1
In an sn2 reaction between bromomethane and hydroxide ion, the concentration of bromoethane is doubled and the concentration of hydroxide ion doubles the rate of reaction?
The rate of reaction in SN2 reaction becomes four times when the the concentration of bromoethane is doubled and the concentration of hydroxide ion doubles.
In SN2 reaction, the rate of reaction is depend on the concentration of both reactant.
For SN2 reaction,
r = k[bromoethane] [hydroxide ion]
r = k [CH3CH2Br] [OH]
When the concentration of bromoethane is doubled and the concentration of hydroxide ion doubles then,
r = k 2×[CH3CH2Br] × 2[OH]
r = 4k[CH3CH2Br] [OH]
Thus, we concluded that the rate of reaction in SN2 reaction becomes four times.
learn more about SN2 reaction:
https://brainly.com/question/27548297
#SPJ4
Dentify the reagents used to carry out the chlorination of benzene. a. cl2/ccl4 b. cl2/fecl3 c. cl2/nacl d. both b and c e. a, b and c
The reagents which are used to carry out the chlorination of benzene are cl2/fecl3 and cl2/nacl
Chlorination is the process of disinfecting drinking water by introducing chlorine to eradicate viruses, germs, and parasites. To get drinking water with safe levels of chlorine, various techniques can be utilized. Chlorination is the technique of disinfecting and eradicating bacteria from drinking water by adding chlorine to it.
To get drinking water with safe levels of chlorine, various techniques can be utilized. Chlorine can be found as solid calcium hypochlorite (Ca(OCl)2), sodium hypochlorite solution (NaOCl), or compressed elemental gas. Chlorine is added to water as part of the chlorination process, however the chlorinating substance need not be pure chlorine.
To learn more about chlorination please visit -
https://brainly.com/question/14962130
#SPJ4
What is the infusion of a radiopaque contrast medium, barium sulfate, into the rectum?
Infusion of radiopaque contrast medium, barium sulfate, into the rectum is technique used in barium enema.
What is barium enema?Barium enema is technique used for the detection of abnormalities or changes in the large intestine colon via X- rays. The exam is indicated for investigation of
megacolonchronic constigation bleeding in stools Inflammatory bowel diseases.Thus, from above we concluded that the silhouette of the colon. This type of diagnosis is used in the case of adnormal pain, rectal bleeding chronic diarrhea.
Learn more about barium enema:
https://brainly.com/question/14804614
#SPJ4
[?] describes how small molecules can be selectively removed from a colloidal suspension while retaining large molecules.
A) Dialysis
B) The Tyndall effect
Answer:
using a centrifuge
Explanation:
Centrifugation will make the large molecules to settle at the bottom.
The Most suitable answer is tyndall effect
What is the molarity of a NaOH solution if 32.47 mL is required to titrate 0.6013 g of potassium hydrogen phthalate (C8H5O4K)
Answer:
0.0907 M
Explanation:
Before you can calculate the molarity, you need to convert grams to moles (via molar mass) and convert mL to L.
(Step 1)
Molar Mass (C₈H₅O₄K):
8(12.011 g/mol) + 5(1.008 g/mol) + 4(15.998 g/mol) + 39.098 g/mol
Molar Mass (C₈H₅O₄K): 204.218 g/mol
0.6013 g C₈H₅O₄K 1 mole
------------------------------ x ------------------ = 0.00294 moles C₈H₅O₄K
204.218 g
(Step 2)
1,000 mL = 1 L
32.47 mL 1 L
--------------- x ----------------- = 0.03247 L
1,000 mL
(Step 3)
Molarity (M) = moles / volume (L)
Molarity = 0.00294 moles / 0.03247 L
Molarity = 0.0907 M
Americium–241 decays into neptunium–237. which correctly describes this process of radioactive decay? an unstable nucleus decays into a more stable nucleus. energy in the nucleus is converted into mass. the strong nuclear force splits the nucleus apart. the atom loses four protons.
When Americium–241 decays into neptunium–237, an unstable nucleus decays into a more stable nucleus.
What is Radioactive decay?
Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive. Three of the most common types of decay are alpha decay (α-decay), beta decay (β-decay), and gamma decay (γ-decay), all of which involve emitting one or more particles. The weak force is the mechanism that is responsible for beta decay, while the other two are governed by the electromagnetism and nuclear force. A fourth type of common decay is Electron Capture, in which an unstable nucleus captures an inner electron from one of the electron shells. The loss of that electron from the shell results in a cascade of electrons dropping down to that lower shell, resulting in emission of discrete X-rays from the transitions. A common example is Iodine-125 commonly used in medical settings.Radioactive decay is a stochastic (i.e. random) process at the level of single atoms. According to quantum theory, it is impossible to predict when a particular atom will decay, regardless of how long the atom has existed. However, for a significant number of identical atoms, the overall decay rate can be expressed as a decay constant or as half-life. The half-lives of radioactive atoms have a huge range; from nearly instantaneous to far longer than the age of the universe.The decaying nucleus is called the parent radionuclide (or parent radioisotope), and the process produces at least one daughter nuclide.Except for gamma decay or internal conversion from a nuclear excited state, the decay is a nuclear transmutation resulting in a daughter containing a different number of protons or neutrons (or both). When the number of protons changes, an atom of a different chemical element is created.To learn more about Radioactive decay: https://brainly.com/question/1770619
#SPJ4
What do the solubility rules tell you about the way to separate the second group of cations?
The second set of cations can be separated using solubility-product constants.
The creation of a new bond between the molecules of the solute and the solvent is known as solubility. Solubility is the greatest amount of solute that can be dissolved in a known amount of solvent at a specific temperature.
The amount of oil that will dissolve in the water column at a specific temperature and pressure is known as its solubility in water. The compound's water solubility increases with increasing polarity. The high water solubility of BTEX chemicals is one reason why they are found in groundwater so frequently. The ability of a medicine to dissolve is essential to its effectiveness. A drug substance cannot be absorbed without it, which results in limited bioavailability.
To learn more about solubility please visit -
https://brainly.com/question/8591226
#SPJ4
How much heat is gained by cu when 51. 8 g of cu is warmed from 15. 5°c to 76. 4°c? the specific heat of cu is 0. 385 j/(g · °c). show the set up and answer with unit
The heat is gained by Cu when 51. 8 g of Cu is warmed from 15. 5°c to 76. 4°c If the specific heat of Cu is 0. 385 j/(g · °c) is 999.42 J.
What is specific heat?Specific heat is defined as the heat which is required to raise the temperature by 1°C of the unit mass of a given substance by a given amount.
We are required to calculate the quantity of heat energy gained by Cu
As we know that,
Q = m × c ×∆T
where,
Q is the quantity of heat energy
m is mass of substance = 0.051kg
c is specific heat of substance = 385J/kg.°C
∆T is change in temperature = 50.9
By substituting all these value we will get,
Q = 0.051 × 385 × 50.9
Q = 999.42J
Thus, we calculated that the quantity of heat gained by 0.051kg of Cu is 999.42J.
learn more about specific heat:
https://brainly.com/question/21041726
#SPJ4
You are asked to weigh approximately 0. 4g of acetylsalicylic acid to the nearest mg. When you enter the data in grams in your lab notebook, how many significant figures will you record ?.
Number of significant figures will be 1
Given:
weight of acetylsalicylic acid = 0. 4g
To Find:
significant figures
Solution: Significant figures are the digits of value which carry meaning towards the resolution of the measurement. They are also called significant figures in chemistry. All the experimental measurements have some kind of uncertainty associated with them.
When we convert 0.4g acetylsalicylic acid to mg we get value 400mg
when we convert 400mg to gram we get value of 0.4 gram
Since 0 before a decimal is not significant so there is only one significant figure that is 4
Learn more about Significant figure here:
https://brainly.com/question/24491627
#SPJ4
A gaseous mixture containing 32.00 g n2 and 16.00 g ne is placed into an 4.00 l vessel at 0.00 °C. What is the pressure of the mixture?
The pressure of the mixture can be found out adding the Partial Pressure of the gas.
Partial pressure of gas is the pressure if it alone occupied the entire volume of original mixture.
Moles = given mass / molar mass
Given,
Mass of Nitrogen = 32g
Molar Mass of Nitrogen = 28g
Mass of Neon = 16g
Molar Mass of Neon = 20g
Volume of gas = 4L
Temperature of vessel = 0°C = 273K
Partial Pressure of nitrogen = P₁
Partial Pressure of neon = P₂
Moles of nitrogen, n₁= 32/28 = 1.14
Moles of neon, n₂= 16/20 = 0.8
Using Ideal gas equation for Nitrogen,
∴ P₁V = n₁RT
⇒ P₁ (1) = 1.14 × 0.082 × 273
⇒ P₁ = 25.52atm
Using Ideal gas equation for Neon,
∴ P₂V = n₂RT
⇒ P₂ (1) = 0.8 × 0.082 × 273
⇒ P₂ = 17.9 atm
Total pressure of the mixture can be found out by adding the partial pressures of both the gases.
Total pressure P = P₁ + P₂
P = 25.52 + 17.9 atm
P = 43.42 atm
Hence, total pressure of the mixture is 43.42atm
Learn more about Partial Pressure here, https://brainly.com/question/13199169
#SPJ4
Calcium oxide, cao, also known as quick lime, may react with carbon dioxide to form calcium carbonate, caco3. which acts as a lewis acid in the reaction?
When calcium oxide react with carbon dioxide to form calcium carbonate then carbon dioxide would react as a Lewis acid in the reaction.
A chemical species known as a Lewis acid has an empty orbital that can accept a pair of electrons from a Lewis base to produce a Lewis adduct.
In the reaction, orbital of carbon dioxide will be vacant orbital that's why it can be considered as Lewis acid.
Its reaction can be written as:
[tex]CaCO_{3}[/tex] → CaO +[tex]CO_{2}[/tex]
It is kind of decomposition reaction.
To know more about Lewis acid
https://brainly.com/question/15570523
#SPJ4
A pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is designated?
A pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is designated by alpha .
When aldohexoses undergo cyclization, anomers are formed. Anomers differ in the spatial position of the -OH group at [tex]C_{1}[/tex] . When the -OH group is positioned along the direction of [tex]-CH_{2} OH[/tex] , alpha anomer exists but when the -OH group is positioned opposite to the direction of the[tex]-CH_{2} OH[/tex] , then we have the beta anomer. Consider the alpha and beta anomers of galactopyranose and a pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is given as ,
To learn more about haworth structure
https://brainly.com/question/6623148
#SPJ4
What compound do you expect to be removed from the organic layer of the organic layer is extracted with 1 m naoh solution?
Hydrochloric acid (HCl) and brine both compound expect to be removed from the organic layer extracted with 1 m NaOH solution.
What is extraction?Using a solvent, a component of interest is selectively removed from a mixture during extraction. The process has been utilized to form the phase separation with the solvent in one phase, and the solute to be present in another phase.
The extraction process can be differentiated based on the phase of the solute and solvent. For example, solid-liquid, liquid-liquid, solid-gas and others.
The extraction with the use of the NaOH forms the solute to lose an electron to the hydroxide of the NaOH and forms the layer of the negative acid. The use of Brine and HCl forms to bond with the organic layer and mediate the extraction process.
Learn more about extraction, here:
https://brainly.com/question/16848369
#SPJ4
Neptunium-237 was the first isotope of a transuranium element to be discovered. the decay constant is /s. what is the half-life in years? half-life = y
The half-life in years of Neptunium-237 which was the first isotope is 2.1 [tex]10^{6}[/tex] years.
Neptunium is most stable and Neptunium-237 is undergoes alpha decay, it means Neptunium-237 is decays by the emission of alpha particles . Seven alpha particles is emitted during decay of Neptunium-237. Neptunium-237 is radioactive actinide elements and first transuranium element.
The transuranium synthesis process involves creating a transuranium element through the transmutation process . The transmutation process is the process of creating heavy elements from light elements. Hence the process is the transmutation of light elements. There are two types: artificial and natural transmutation.
to learn more about transuranium element.
https://brainly.com/question/1491386
#SPJ4
For the reaction c 2h₂ ---> ch₄, how many moles of hydrogen are required to produce 10 mol of methane, ch₄
The number of moles of hydrogen required will be 20 moles.
Stoichiometric mole ratioFirst, let us look at the balanced equation of the reaction:
[tex]C + 2H_2 --- > CH_4[/tex]
From the above equation, it is obvious that 1 mole of carbon requires 2 moles of hydrogen in order to produce a mole of methane.
In other words, the mole ratio of hydrogen to methane is 2:1. For every 1 mole of methane produced, 2 moles of hydrogen are consumed.
Now, what we want to produce is 10 moles of methane. The amount, in moles of hydrogen required, is calculated by:
10 moles x 2 = 20 moles.
Thus, 20 moles of hydrogen would be required to produce 10 moles of methane.
More on stoichiometric mole ratios can be found here: https://brainly.com/question/15053457
#SPJ1