What is the molality of a nh₄no₃ solution of 125 g of nh₄no₃ (80.0434 g/mol) in 275 g of water (18.0153 g/mol)?

Answer:

4.43 g Cl₂

Explanation:

To find the mass of Cl₂, you need to (1) convert moles HCl to moles Cl₂ (via the mole-to-mole ratio from equation coefficients) and then (2) convert moles Cl₂ to grams (via the molar mass). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units. The final answer should have 3 significant figures like the given value.

4 HCl(g) + O₂(g) -----> 2 Cl₂(g) + 2 H₂O(g)
^                                   ^

Molar Mass (Cl₂): 2(35.453 g/mol)

Molar Mass (Cl₂): 70.906 g/mol

0.125 moles HCl          2 moles Cl₂             70.906 g
--------------------------  x  ----------------------  x  -------------------  =  4.43 g Cl₂
                                     4 moles HCl              1 mole

The volume of 5.0 m hcl is required to react completely with 3.00 g of magnesium is 20 L.

Mg + 2HCl -----MgCl2 + H2

Given,

Molar mass of Mg = 24g/mol

Mole = Given mass/ Molar mass

Mole= 3/24

= 0.125 mol

From the given equation we get to know that

Mol ratio of Mg and HCl is 1:2.

Therefore,

mol of HCl = (2/1) × mol of Mg

=2× 0.125

= 0.25

Molarity = m× V

= M/m

= 5/0.25

= 20L

Thus, we find that the volume of 5.0 m hcl is required to react completely with 3.00 g of magnesium is 20 L.

learn more about Molarity:

https://brainly.com/question/26921570

#SPJ4

Answer:

3.0 L O₂

Explanation:

If CO reacts at STP, it means that there are 1.0 moles of CO. To find the moles of O₂, you need to use the mole-to-mole ratio from the given equation.

1.0 moles CO            1 mole O₂
----------------------  x  ---------------------  =  0.5 moles O₂
                                2 moles CO

To calculate the liters of oxygen, you need to use Avogadro's Law:

V₁ / N₁ = V₂ / N₂

In this equation, "V₁" and "N₁" represent the volume and moles of the first molecule. "V₂" and "N₂" represent the volume and moles of the second molecule. You can plug the given and calculated values into the equation and simplify to isolate V₂.

V₁ = 6.0 L                     V₂ = ? L

N₁ = 1.0 moles              N₂ = 0.5 moles

V₁ / N₁ = V₂ / N₂                                            <----- Avogadro's Law

(6.0 L) / (1.0 moles) = V₂ / (0.5 moles)         <----- Insert values

6.0 = V₂ / (0.5 moles)                                   <----- Simplify left side

3.0 = V₂                                                         <----- Multiply both sides by 0.5

**I am not 100% confident on this answer. Please let me know if it is incorrect**

Answer:

2CO(g) + O2(g) → 2CO2(g)

If 9.0 L of O2 react at STP, how

many moles of CO2 form during the

reaction?

[?] mol CO2

Explanation:

What would it be if it was 9.0?

A piston-cylinder device contains helium gas, during a reversible, isothermal process the entropy of the helium will sometimes increase.

As entropy of an ideal gas depends on pressure and temperature . Hence , entropy change during isothermal process if pressure changes . Enropy changes whenever there is a transfer of heat . The change in entropy is the heat added divided by the temperature at which the transfer took place .

A piston-cylinder is a moving device that is made tight by the piston rings. It moves inside in a cylinder in the form of liquid and later expands and then contracts.

To learn more about  reversible isothermal process

https://brainly.com/question/15429172

#SPJ4

The potential of the hydrogen in water gives the pH of the acidity and basicity of the solution. The pH of the solution is 9.06. Thus, option iii is correct.

The pH of a substance is given by the subtraction of the pOH from 14 which is the range of the pH scale.

The dissociation reaction for ammonia is given as,

NH₃ (aq) + H₂O (l)  ⇄  NH₄⁺ (aq) + OH⁻ (aq)

Here, the concentration of ammonia is [NH₃] - x, ammonium ion is [NH₄⁺] + x, and hydroxide ion is x.

The molar concentration of ammonia is,

M = (0.12 M × 0.2 L) ÷ 0.45 L = 0.053 M

The molar concentration of ammonium ion is,

M = (0.15 M × 0.25 L) ÷ 0.45 L = 0.083 M

From the base dissociation constant and previous concentration from the reaction, the value of x or hydroxide ion is calculated as,

Kb = [NH₄⁺][OH⁻] ÷ [NH₃]

1.8 × 10⁻⁵ (0.053 - x) - (0.083 + x) × x = 0

x = [OH⁻] = 1.15 x 10⁻⁵

The pH from the hydroxide ion is calculated as,

pOH = - log [OH⁻]

= - log (1.15 x 10⁻⁵)

= 4.94

Further,

pH = 14 - pOH

= 14 - 4.94

= 9.06

Therefore, option iii. 9.06 is the pH of the solution.

Learn more about pH here:

https://brainly.com/question/14790520

#SPJ4

Al₂(SO₄)₃ + 3BaI₂ → 2AlI₃ + 3BaSO₄

Answer:

1.1 atm

Explanation:

moles of neon =  10.0g /20.2g/mole =.495 mole

moles of ar      =  10.0 g /39.9 g/mole= .251 mole

the partial pressure of each is determined  by their mole fractions of the entire mix

Ne   .495 mole / (.495 + .251 mole)   * 1.6 atm =

      1.1 atm    ( to two significant figures)

When the reactants have less enthalpy than the products, then heat energy is given out. That is option A.

An exothermic reaction is a type of reaction in which the energy level of the reactants are higher than that of the product.

It is this discrepancy in the energy levels of both the reactants and products would lead to the generation and release of energy into the surrounding environment.

The enthalpy of exothermic reaction is gotten by the difference between the energy needed to break the bonds of reactants and the energy needed for the formation of products.

Therefore,when the reactants have less enthalpy than the products, then heat energy is given out.

Learn more about enthalpy here:

https://brainly.com/question/14291557

#SPJ1

The correct answer choice which is the most common use of polyvinyl chloride is: plastic pipes. Option C

Below are some other uses of polyvinyl chloride:

Polyvinyl Chloride (PVC) is polymer which is used in various applications including widespread use in building, transport, packaging, electrical and healthcare applications.

So therefore, the most common use of polyvinyl chloride is in the making of plastic pipes

Learn more about polyvinyl chloride:

https://brainly.com/question/26356455

#SPJ1

Answer:

1.0535×10(exponent24)

Explanation:

N (number of molecules)

n(number of moles)

L( Avogadro's constant )

N=n×L

N=1.75×6.02×10(exponent 23)

Explanation:

In one mole we always have:

1 mol = 6.02 X 10²³ molecules

So emulates simple rule of 3 we will have;

1 mol ----------> 6.02 X 10²³

1.75 moles ----> X

X = 1.0535 X 10²⁴ molecules

Hope this helps, Good studies!

The volume of the aqueous solution of sodium sulfate required is 153.85 mL.

The number of moles of the salt in the given mass is calculated as follows;

moles = reacting mass / molar mass

molar mass of  sodium sulfate = 142 g/mole

moles = (4.27) / (142)

moles = 0.03 mole

Concentration = moles/volume in liters

0.195 = 0.03/V

V = 0.03/0.195

V = 0.15385 liters

V = 153.85 mL

Thus, the volume of the aqueous solution of sodium sulfate required is 153.85 mL.

Learn more about volume here: https://brainly.com/question/1972490

#SPJ1

The pH= 7.57 ,  pOH = 6.86, and  [OH-] = 1.58 x 10⁻⁴ M M of the given solution.

pH is a scale that measures the acidity and basicity of a solution. Its ranges from 1 to 14. Seven is neutral.

The H given is 7. 2 × 10⁻⁸ m

Calculating the pOH

[H⁺] = 10^(-7.20)

[H⁺] = 6.31 x 10⁻⁹ M

pOH = 14 - 7.2

pOH = 6.8

Calculating the [oh−]

[OH⁻] = 1 x 10⁻¹⁴ / 6.31 x 10⁻⁹

[OH⁻] = 1.58 x 10⁻⁴ M

Calculating the pH

pH = 14 - 6.43

pH = 7.57

Thus, the pH= 7.57 , pOH = 6.86, and  [OH-] = 1.58 x 10⁻⁴ M.

To learn more about pH, refer to the below link:

https://brainly.com/question/22299206

#SPJ4

Pyruvate substance is a product of glycolysis, a precursor of gluconeogenesis and a precursor of the citric acid cycle

A crucial node in the network of metabolic pathways is pyruvate. Pyruvate can be transformed into ethanol, the amino acid alanine, fatty acids or energy through acetyl-CoA, carbohydrates through gluconeogenesis, and fatty acids or energy. As a result, it combines numerous important metabolic activities.

Pyruvate's main job is to carry carbon atoms into the mitochondrion where they are fully oxidized into carbon dioxide.

The final byproduct of glycolysis, pyruvate, is crucial to cell metabolism. It is made in the cytosol and then oxidized in the mitochondria, where it activates oxidative phosphorylation and feeds the citric acid cycle.

To learn more about pyruvate please visit -
https://brainly.com/question/9507938
#SPJ4

Answer:

(1/0)n

See attached explanation.

The most likely reaction product in the monobromination of 2-pentanone by bromine in the presence of acid in the dark is known to be 1-Bromo-2-pentanone

The term is known to be the bringing in of one bromine atom into  what we call an organic compound.

Note that the brominating of benzene is known to be a good example of what we know as electrophilic aromatic substitution reaction. In this kind of reaction, the electrophile (which is bromine) is said to forms a kind of sigma bond to that of the benzene ring, bringing in an intermediate. Then, a proton is said to be deleted from the intermediate to create a substituted of benzene ring.

Hence, The most likely reaction product in the monobromination of 2-pentanone by bromine in the presence of acid in the dark is known to be 1-Bromo-2-pentanone

Learn more about monobromination from

https://brainly.com/question/14356147

#SPJ1

See full question below

Identify the most likely reaction product(s) in the monobromination of 2-pentanone by bromine in the presence of acid in the dark.

a.) 1-Bromo-2-pentanone and 3-bromo-2-pentanone

b.) 1-Bromo-2-pentanone, 3-bromo-2-pentanone, and 4-bromo-2-pentanone

c.) 1-Bromo-2-pentanone, 3-bromo-2-pentanone, 4-bromo-2-pentanone, and 5-bromo-2-pentanone

d.) 3-Bromo-2-pentanone

e.)1-Bromo-2-pentanone

The heat of fusion (δhfus) of benzene (c6h6) is 10. 0kjmol while its heat of vaporization (δhvap) is 34. 1kjmol then enthalpy of sublimation (δhsub) of benzene is 44.1 kJ mol.

The heat of fusion is amount of heat involved during conversion of solid into liquid.

Solid →  liquid

The heat of vaporization is amount of heat involved during conversion of liquid into vapor.

liquid →  vapor

The enthalpy of sublimation is amount of energy involved during conversion of solid into vapor.

Solid → vapor

The enthalpy of sublimation is equal to sum of  heat of fusion and  heat of vaporization .

Mathematically,  heat of sublimation =  heat of fusion + heat of vaporization .

heat of sublimation =  10. 0 kJmol +  34. 1 kJmol. = 44.1 kJ mol

learn more about heat of fusion

https://brainly.com/question/14053504

#SPJ4

There are 4 different products will be formed from a poorly planned crossed aldol addition.

In a crossed aldol condensation, two distinct ketone and aldehyde reactants are used. Due to the possibility of several enolate nucleophiles as well as multiple carbonyl electrophiles, similar reactions typically result in a variety of distinct condensation products.

Ethanol and propanol undergo cross-aldol condensation, which results in two products:

Therefore, the correct answer will be option (d)

To know more about products

https://brainly.com/question/28027128

#SPJ4

There are four different products can be formed from a poorly planned crossed aldol addition.

So the correct option is D

Two distinct ketone and aldehyde reactants are used in a crossed condensation reaction. Due to presence of distinct ketone and aldehyde reactants there are possibility of formation of several enolate ion nucleophiles as well as multiple carbonyl electrophile .

Example : Ethanal and propanone undergoes cross-aldol condensation reaction and give results in two products.

First case: ethanal acts as enolate ion

Second case: propanone acts as enolate ion

Third case: when self condensation is also a product.

to learn more about aldol addition

https://brainly.com/question/27181779

#SPJ4

Energy required to raise the temperature from 35°C - 45 °C= 25116 J.

specific heat, the quantity of warmth required to raise the temperature of one gram of a substance by means of one Celsius degree. The units of precise warmth are generally energy or joules consistent with gram according to Celsius diploma. for instance, the unique warmth of water is 1 calorie (or 4.186 joules) according to gram in step with Celsius degree.

solving,

Sample of liquid = 400. 0 g

temperature = 30. 0 ºc

joules of energy are required to raise the temperature of the water to 45. 0 ºc

therefore rise in temperature 45 - 30 = 15°C

Specific heat capacity = 4.186 J/g m °C

In kelvin = 273 + 15 = 288

          = ∴ energy required = Q = m s ( t final - t initial)

            =  400*4.186 * 15

           = 25116 joule

Learn more about specific heat here:-https://brainly.com/question/21406849

#SPJ4

When 3. 41 g of C6H12O6 is dissolved in 85 ml of water the molality is 2.2m.

Molality is the amount of a substance dissolved in a certain mass of solvent.

Molality = moles of solute/ mass of solvent (kg)

Given,

Mass of solute = 3.14g

Molar mass of solute = 180 g

Mole of solute= given mass/molar mass

= 3.14/180

= 0.0189 mol.

Volume of solvent = 85 ml

Density of water = 1 g/cm3

Density = mass/ volume

mass = density × volume

= 1× 85

= 85g

Molality = (0.0189/ 85) × 1000

= 2.2m

Thus we find that the molality of given solution is 2.2m.

learn more about molality:

https://brainly.com/question/26921570

#SPJ4

Answer:

Atoms are made up of protons, neutrons, and electrons. The mass of an atom is determined by the total number of neutrons and protons in the nucleus. The difference between an atom and an ion is the number of electrons. The change of electrons does not change the mass because electrons have a negligible mass. In other words, the mass of electrons is so small, it is considered insignificant.

430 g of AgCl would be needed to make a 4.0m solution with a volume of 0.75 L.

Remember that mol/L is the unit of molarity (M).

We can compute the necessary number of moles of solute by multiplying the concentration by the liters of solution, according to dimensional analysis.

0.75L×4.0M=3.0mol

Then, using the periodic table's molar mass for AgCl, convert from moles to grams:

3.0mol×143.321gmol=429.963g

The final step is to round to the correct significant figure, which in this case is two: 430g.

Hence, 430 g of AgCl would be needed to make a 4.0m solution with a volume of 0.75 L.

Learn more about Molarity here:
https://brainly.com/question/8732513

#SPJ4

The differences between grasses and legumes are,

The advantage and disadvantage of grasses are given below.

Advantage:

Grasses helps to keep air clean, trap carbon dioxide , reduce erosion from storm water runoff , improve soil , decreases noise pollution and reduce temperature.

Disadvantage:

The advantage and disadvantage of legumes are given below.

Advantage:

Disadvantage:

learn about legumes

https://brainly.com/question/19900764

#SPJ4

A 1. 7 m solution of the acid ha has a ph of 1. 0, then the ka of the acid is 6.25×10^(-3).

The acid dissociation constant is defined as the value which is used to measure the strength of the specific acid in the solution.

Equation for general dissociation of strong or weak acid is

HA ----- (H+) + ( A-)

Ka can be expressed as

Ka = [H+] [A-]/[HA]

where [H+] is the concentration of H+ ions

Now, we will find the value of concentration of H+ ions

pH = -log [H+]

1 = -log[H+]

[H+] = antilog(-1)

[H+] = 0.1

By using ICE table, we find that the concentration of [HA] is

1.7-0.1

= 1.6

By substituting all the values we get,

Ka = 0.1 × 0.1/1.6

= 6.25×10^(-3)

Thus, we find that the Ka value of the given solution is 6.25×10^(-3).

learn more about acid dissociation constant:

https://brainly.com/question/2728613

#SPJ4

The  season that is shown in the picture attached is that:

Metals are known to often expand due to different factor. For example, the rails of a railway are known to often expand in summer and they tend to contract in winter. This tend to make the gaps kept to be between successive rails and it is one that allow for expansion.

Note also that  in Summer the expansion joint will tend to have little space as the two sides of the bridge is said to expand because of the heat and in terms of winter, it contract and there are bigger space as they tend to contract in the cold.

Hence, The  season that is shown in the picture attached is that:

Learn more about Metals from

https://brainly.com/question/4701542

#SPJ1

Warmer air can hold more water vapor than colder air.

Your home's windows are fogged with condensation. A musty odor can be detected in the air inside your home. When you breathe in, you can feel the moisture in the air. These indicators indicate that you should act quickly. Moisture levels in your home raise the overall temperature and make it feel hot.

Humidity is classified into two types: absolute and relative.

The former describes the humidity present in a parcel of air without taking temperature into account, whereas the latter describes the humidity present in the air while taking temperature into account. The former defines the amount of water content by dividing the parcel's weight by its volume, whereas the latter is calculated by dividing the amount of water content present by the total capacity of the parcel of air to hold multiplied by 100. The former decreases with height, whereas the latter becomes saturated when it reaches 100%.

Learn more about temperature and humidity:

https://brainly.com/question/22069910

#SPJ4

Ksp of PbBr₂ is 6.60 × 10⁻⁶. The molar solubility of PbBr₂ in pure water is 0.0118M.

Ksp or Solubility Product Constant is an equilibrium constant for the dissociation in an aqueous solution.

Molar solubility (S) is the concentration of the dissolved substance in a solution that is saturated.

Let the molar solubility be S upon dissociation.

PbBr₂ or Lead Bromide dissociates in pure water as follows:

                          PbBr₂ ----------> Pb⁺² + Br⁻

                                                     S      2S

Ksp = [Pb⁺²] [ Br⁻]

Ksp = (S) (2S)²

Ksp = 4S³

6.60 × 10⁻⁶ = 4S³

S = 0.0118M

Hence, the Molar solubility S is 0.0118M.

Learn more about Molar solubility here, https://brainly.com/question/16243859

#SPJ4

Answer:

Fe(C₂H₃O₂)₃,  Fe(CN)₃,  Pb(C₂H₃O₂)₄,  Pb(CN)₄

Explanation:

Cations (positively charged ions) can only form ionic bonds with anions (negatively charged ions). However, you can't just simply put one cation and one anion together to form a compound. Each compound needs to been neutral, or have an overall charge of 0. When cations and anions do not have charges that perfectly cancel, you need to modify the amount of each ion in the compound.

1.) Fe(C₂H₃O₂)₃

-----> Fe³⁺ and C₂H₃O₂⁻

-----> +3 + (-1) + (-1) + (-1) = 0

2.) Fe(CN)₃

-----> Fe³⁺ and CN⁻

-----> +3 + (-1) + (-1) + (-1) = 0

3.) Pb(C₂H₃O₂)₄

-----> Pb⁴⁺ and C₂H₃O₂⁻

-----> +4 + (-1) + (-1) + (-1) + (-1) = 0

4.) Pb(CN)₄

-----> Pb⁴⁺ and CN⁻

-----> +4 + (-1) + (-1) + (-1) + (-1) = 0

From the addition of 1 equivalent of HBr to 1,3-butadiene, 3-bromo-1-butene is obtained as a product.

What is moles?

Moles are defined as the smallest base unit that is equivalent to [tex]6.02214 X 10^{23}[/tex] units.

Moles are chemical entities, which are used to measure the mass or molecular mass of the compound, molecule, or atom. The moles are, for example can be explained as equal to the mass of the atom. For example, there is one mole in 12 grams of carboncarbon.

Thus the kinetic product formed is 3-bromo-1-butene.

Learn more about mole or mole fraction:

https://brainly.com/question/16031532

#SPJ4

Answer:

option b is the answer of given statementtwo atoms of potassium react with one molecule of chlorine to produce two molecules of potassium chloride