If the pressure of 1.5 moles of a gas is 2 atm and the temperature is 27°C, what is the volume of the gas?
Group of answer choices

A. 9.25 L

B. 5.0 L

C. 37.0 L

D. 18.5 L

Answer:

0.116 M

Explanation:

(Step 1)

Calculate the amount of moles using the molarity ratio.

100.0 mL / 1,000 = 0.1000 L

Molarity = moles / volume

0.695 M = moles / 0.1000 L

0.0695 = moles

(Step 2)

Calculate the new molarity using the moles and new volume.

500.0 mL / 1,000 = 0.5000 L

Molarity = moles / volume

Molarity = 0.0695 moles / (0.1000 L + 0.5000 L)

Molarity = 0.0695 moles / (0.6000 L)

Molarity = 0.116 M

0.5376 g is the minimum mass of sodium sulfite that we should add.

Molarity (M) is defined as the number of moles of solute dissolved in 1L of solution. Molarity is also known as Molar concentration. The S.I unit of Molarity is molar (M) or mol/L.

The conversion sequence is

mL solution → L solution →  mol → g

[tex]80\ mL \times \frac{1\ L}{1000\ mL} \times \frac{0.04\ \text{mol Calcium nitrate solution}}{L} \times \frac{168\ \text{Calcium nitrate solution}}{\text{mol Calcium nitrate solution}}[/tex]

= 0.5376 g

Thus from the above conclusion we can say that 0.5376 g is the minimum mass of sodium sulfite that we should add.

Learn more about the Molarity here: https://brainly.com/question/26873446

#SPJ1

From the calculation, the equilibrium constant is obtained as 3. Option A

The term equilibrium constant shows the extent to which we could see the conversion of the reactants to products in a reaction system. Now we know that the equilibrium constant can be obtained by the use of the formula;

K = [H2] [I2]/[HI]^2

Now we have that at equilibrium;

[H2]  = 0.5 M

[I2] = 1.5 M

[HI] = 0.5M

It then follows that;

K = 1.5 * 0.5/( 0.5)^2

K = 3

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

C. The heat released when the aluminum is cooled from 70°C to 50°C is -180 J.

Specific heat capacity is the quantity of heat needed to raise the temperature per unit mass.

The heat released when the aluminum is cooled from 70°C to 50°C is calculated as follows;

Q = mcΔθ

where;

Q = (10)(0.9)(50 - 70)

Q = -180 J

Thus, the heat released when the aluminum is cooled from 70°C to 50°C is -180 J.

Learn more about heat capacity here: https://brainly.com/question/16559442

#SPJ1

See the attached image.

Answer:

2.60 L

Explanation:

To find the new volume, you need to use the Combined Gas Law:

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

In this equation, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure. volume, and temperature.

At STP, the pressure is 1.0 atm and the temperature is 273 K. Before you can plug the values into the equation, you need to convert pressure from torr to atm and the temperature from Celsius to Kelvin.

P₁ = 720 torr / 760 = 0.947 atm            P₂ = 1.0 atm

V₁ = 3.0 L                                                V₂ = ? L

T₁ = 25 °C + 273 = 298 K                       T₂ = 273 K

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]                                                  <----- Combined Gas Law

[tex]\frac{(0.947atm)(3.0L)}{298K}=\frac{(1.0atm)V_2}{273K}[/tex]                           <----- Insert values

[tex]\frac{2.84}{298K}=\frac{(1.0atm)V_2}{273K}[/tex]                                          <----- Multiply 0.947 and 3.0

[tex]0.00954=\frac{(1.0atm)V_2}{273K}[/tex]                                      <----- Simplify left side

[tex]2.60={(1.0atm)V_2}[/tex]                                         <----- Multiply both sides by 273

[tex]2.60L=V_2[/tex]                                                    <----- Divide both sides by 1.0

Answer:

H3PO4 (phosphoric acid) is weak acid

Explanation:

This is because weak acid is an acid that ionizes only slightly in an aqueous solution.

Answer:

D.) 2.5 moles

Explanation:

To find the moles of H₂, you need to multiply the given value by the mole-to-mole ratio. This ratio consists of the coefficients in front of the relevant molecules. It is important to arrange the ratio in a way that allows for the cancellation of units.

1 Mg + 2 HCl -----> MgCl₂ + 1 H₂
^                                            ^

2.5 moles Mg            1 moles H₂
-----------------------  x  ---------------------  =  2.5 moles H₂
                                   1 mole Mg

Answer:

BeCO3 will hydrolyze in an aqueous medium, yielding a basic solution.

Explanation:

In accord with the rules of salt hydrolysis, the cation [tex]Be^{2+}[/tex] can hydrolyze. The anion [tex]CO_{3} ^{2-}[/tex] can also hydrolyze, given that the resulting conjugate acid is weak.

Given that both ions hydrolyze, the Ka (acid ionization constant) and Kb (Base ionization constant) of each reactant (or product [that is, the conjugate acid and base for each ion]) must be compared.

Using the web (hopefully some sort of reference table has been provided to you):

Ka (for Be^2+) = [tex]3 * 10^{-7}[/tex]

Kb (for CO3^2-) = [tex]\frac{Kw (water)}{Ka (HCO3)}[/tex]

= [tex]\frac{1*10^{-14}}{4.7*10^{-11}}[/tex]

= [tex]2.1 * 10^{-4}[/tex]

The Kb > Ka, so the solution will be basic.

Hope this helps! My apologies if this answer is incorrect, I have not done this type of problem in a while.

Answer:

B.) 36.0 grams

Explanation:

To find the mass of water, you need to (1) convert grams H₂ to moles (using the molar mass), then (2) convert moles H₂ to moles H₂O (using mole-to-mole ratio from reaction coefficients), and then (3) convert moles H₂O to grams (using the molar mass). It is important to arrange the conversions in a way that allows for the cancellation of units.

Molar Mass (H₂): 2(1.008 g/mol)

Molar Mass (H₂): 2.016 g/mol

Molar Mass (H₂O): 2(1.008 g/mol) + 15.998 g/mol

Molar Mass (H₂O): 18.014 g/mol

2 H₂ + O₂ -----> 2 H₂O
^                        ^

4.0 g H₂            1 mole             2 moles H₂O           18.014 g
---------------  x  ----------------  x  ------------------------  x  ---------------  = 36 g H₂O
                          2.016 g             2 moles H₂              1 mole

a. The circulatory system in fish is one-directional while it is two-directional in humans.

b. P has a high concentration of carbon dioxide and low oxygen concentration whereas Q has high oxygen concentration and low carbon dioxide concentration.

The circulatory system is the system of organism and tissues which help to transport blood and other fluids through the body of a living organism.

The organs of the circulatory system include:

a. In the given diagram sowing the circulatory system of man and the fish, it can be seen that the direction of blood flow in the fish is one way through the heart. However, in humans, the direction of blood flow is two-way through the heart.

b. The gas in P has a high concentration of carbon dioxide and low oxygen concentration. However, the gas flowing through Q has high oxygen concentration and low carbon dioxide concentration.

In conclusion, the circulatory system is important in the exchange of gases in the body.

Learn more about circulatory system at: https://brainly.com/question/3597250

#SPJ1

The environmental conditions of the ocean are:

In our oceans, there are known to be a lot of environmental conditions that are known to often affect the growth, survival and also the productivity of marine organisms. These are the ones listed above.

Note that the increased concentration of chemicals, e.g.  nitrogen and phosphorus is one that can be harmful to marine life.

Hence, The environmental conditions of the ocean are:

Learn more about ocean from

https://brainly.com/question/25154137

#SPJ1

The number of moles of 210 grams of NaHCO₃ is 2.5 moles.

To calculate the number of moles use the formula

Number of moles = [tex]\frac{\text{Given Mass}}{\text{Molar Mass}}[/tex]

Mass of NaHCO₃ = 210 g

Now we have to find the Molar mass of NaHCO₃

= Atomic mass of Na + Atomic mass of H + Atomic mass of C + 3 (Atomic mass of O)

= 23 + 1 + 12 + 3 (16)

= 36 + 48

= 84 g/mol

Now put the value in above formula we get

Number of moles = [tex]\frac{\text{Given Mass}}{\text{Molar Mass}}[/tex]

                             = [tex]\frac{210\ g}{84\ g/mol}[/tex]

                             = 2.5 moles

Thus from the above conclusion we can say that The number of moles of 210 grams of NaHCO₃ is 2.5 moles.

Learn more about the Moles here: https://brainly.com/question/15356425

#SPJ1

56.4 g of platinum will contain 1.7417 x  [tex]10^{23}[/tex] atoms

According to Avogadro, 1 mole of any substance contains 6.022 x [tex]10^{23}[/tex] atoms of the substance.

The problem is we don't know how many moles of platinum that are present in 56.4 g. Thus, the first thing is to calculate the number of moles of platinum present in 56.4 g of the substance.

This can be achieved by using the formula, mole = mass/molar mass. Keep in mind that the molar weight of platinum is 195 g/mol.

Therefore,

Mole of 56.4 g of platinum = 56.4/195 = 0.2892 moles

If,

1 mole of any substance = 6.022 x [tex]10^{23}[/tex] atoms

Then,

0.2892 moles of platinum = 0.2892 x 6.022 x [tex]10^{23}[/tex] atoms = 1.7417 x  [tex]10^{23}[/tex] atoms

In other words, 56.4 g of platinum will contain 1.7417 x  [tex]10^{23}[/tex] atoms 1.7417 x  [tex]10^{23}[/tex] atoms of the metal.

More on the number of atoms in substances can be found here: https://brainly.com/question/11373631

#SPJ1

The pH of the solution when no base is added is 0.424.

An aqueous solution's acidity or basicity can be determined using the pH scale. The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

The chemical formula of hypochlorous acid is HClO.

1 mole of HClO produces 1 mole of hydrogen ions and 1 mole of fluoride ions.

KOH (aq) + HClO (aq) → KClO (l) + H2O (l)

To calculate the pH of the solution when no base is added, we use the equation:

[tex]p_{H} = - log {H}^{+}[/tex]

We are given:

[tex]H^{+} = 0.376 M[/tex]

Putting values in the above equation, we get:

[tex]p_{H} = - log (0.376)[/tex]

[tex]p_{H}[/tex] = 0.424

Hence, the pH of the solution when no base is added is 0.424

To know more about pH refer to:  

https://brainly.com/question/14960105

#SPJ1

Answer:

No.

Explanation:

HI is more polar than HF

Answer:

0.717 M LiOH

Explanation:

(Step 1)

Calculate the moles of H₃PO₄ using the molarity equation.

29.15 mL / 1,000 = 0.02915 L

Molarity = moles / volume (L)

0.205 M = moles / 0.02915 L

0.00598 = moles

(Step 2)

Convert moles H₃PO₄ to moles LiOH using the mole-to-mole ratio from reaction coefficients.

1 H₃PO₄ + 3 LiOH -----> Li₃PO₄ + 3 H₂O
^                ^

0.00598 moles H₃PO₄            3 moles LiOH
------------------------------------  x  --------------------------  =  0.0179 moles LiOH
                                                  1 mole H₃PO₄

(Step 3)

Calculate the molarity of LiOH using the molarity equation.

25.0 mL / 1,000 = 0.0250 L

Molarity = moles / volume (L)

Molarity = 0.0179 moles / 0.0250 L

Molarity = 0.717 M

Answer:

13.0 L

Explanation:

To find the volume, you need to use the Ideal Gas Law:

PV = nRT

In this equation,

-----> P = pressure (kPa)

-----> V = volume (L)

-----> n = moles

-----> R = Ideal Gas constant (8.314 kPa*L/mol*K)

-----> T = temperature (K)

After converting the temperature from Celsius to Kelvin, you can plug the given values into the equation and simplify to find "V". The final answer should have 3 sig figs to match the sig figs of the given values.

P = 855 kPa                                  R = 8.314 kPa*L/mol*K

V = ? L                                           T = 26.0 °C + 273.15 = 299.15 K

n = 4.47 moles

PV = nRT

(855 kPa)V = (4.47 moles)(8.314 kPa*L/mol*K)(299.15 K)

(855 kPa)V = 11117.48496

V =  13.0 L

Answer:

B.) Adhesion

Explanation:

A.) is incorrect. Viscosity is a measure of internal friction that affects the fluidity of a liquid.

B.) is correct. Adhesion is the ability of water to stick to other substances (which are not water).

C.) is incorrect. Surface tension is the tension created by the bonds of the surface particles.

D.) is incorrect. Density is a ratio that compares mass to volume.

The structure of isocynide is

N=C

What is the importance of VSEPR theory?

Valence bond theory describes the electronic structure of molecule .The theory says that electrons fills the atomic orbitals of an atom within a molecule .

In the structure of isocynide there are triple bonds between Nitrogen and carbon . The bond length is 115.8pm and the bond angle is 180°. There is two pi and one sigma bond .

to learn more about VSEPR theory click here https://brainly.com/question/23129240

#SPJ9



The structure of isocynide is H--N=C

Valence bond (VB) theory is a chemical bonding theory that describes the chemical bonding between two atoms. Like molecular orbital (MO) theory, it explains sticking using principles of quantum mechanics. According to valence bond theory, sticking is caused by the overlapping of half-filled atomic orbitals.

Valence Bond theory represents covalent bond formation as well as the electronic form of molecules. The theory assumes that electrons inhabit atomic orbitals of individual atoms within a molecule, and that the electrons of one atom are drawn to the nucleus of another atom.

To learn more about Valence Bond theory, refer

https://brainly.com/question/11552489

#SPJ9

The answer is C which is Reading Writing

A student who prefers to study by converting lecture or written information. The learning style of the student is reading writing. Thus option c is correct.

Learning style is defined as the hypothesis that learners can be classified based on how they process information.

It can also be defined as a set of theories aimed at explaining variances in individual learning.

There are basically seven types of learning style.

Reading and writing is one of the best style of learning as by this we can memorize the things for very long time.

Thus, the learning style of the student is reading writing. Thus option c is correct.

To learn more about learning style, refer to the link below:

https://brainly.com/question/1235988

#SPJ2

Once balanced, the coefficient of HCl in the following reaction: Mg + HCl → MgCl2 + H2 is 2 (option B).

A chemical reaction is said to be balanced when the number of moles of each atom of an element on both sides of the equation is the same.

According to this question, magnesium reacts with hydrochloric acid to form magnesium chloride and hydrogen gas as follows:

Mg + HCl → MgCl2 + H2

However, to balance the equation, we make use of coefficients, which are numbers placed in front of a compound to make the number of moles of atoms equal.

The balanced equation is as follows:

Mg + 2HCl → MgCl2 + H2

Therefore, once balanced, the coefficient of HCl in the following reaction: Mg + HCl → MgCl2 + H2 is 2.

Learn more about balanced equation at: https://brainly.com/question/7181548

#SPJ1

Using standard heats of formation, the standard enthalpy change for the reaction  is  mathematically given as

= 542.11 kJ

Generally, the equation for  standard enthalpy change is  mathematically given as

[tex]\Delta H rxn = \Delta H product - \Delta H reactant[/tex]

therefore,

[tex]\Delta H rxn = (\Delta H Br_2 + \Delta H 3F_2) - (\Delta H 2BrF_3)[/tex]

= (30.91 kJ + 3*0 kJ) - (2*(-255.6) kJ)

= 542.11 kJ

In conclusion, the standard enthalpy change for the following reaction is

= 542.11 kJ

Read more about enthalpy

https://brainly.com/question/13996238

#SPJ1

Answer: [tex]\Large\boxed{m=8.5~g}[/tex]

Rounded to the nearest 2 significant figures

Explanation:

Given information

Volume of Solution = 417 mL

Molarity of Solution = 0.327 M (mol / L)

Given molecular weight

Mg (Magnesium) = 24 g / mol

F (Flourine) = 19 g / mol

Total Weight (MgF₂) = 24 + 2 × 19 = 62 g /mol

Given formula

m = V × M × n

Convert the unit of volume to Liter

1 L = 1000 mL

417 mL = 417 / 1000 = 0.417 L

Substitute values into the given formula

m = (0.417) × (0.327) × (62)

Simplify by multiplication

m = 136.359 × 62

[tex]\Large\boxed{m=8.5~g}[/tex]

Hope this helps!! :)

Please let me know if you have any questions

If there was an inverse relationship between the temperature and the volume, our daily lives change because in high temperature things will contract.

If there was an inverse relationship between the temperature and the volume then with increasing temperature decrease occur in the volume of a substance. If this type of relationship is present in the world, the objects will contract when the temperature is high and expand when the temperature is low which make the solid materials expand at winter and contract at summer season.

So we can conclude that if there was an inverse relationship between the temperature and the volume, our daily lives change because in high temperature things will contract.

Learn more about temperature here: https://brainly.com/question/25677592

#SPJ1

The wavelength is obtained as 122 nm. Option A

We know that from the Bohr model of the atom, an electron can move from a higher energy level to a lower energy level or from a lower energy level to a higher energy level. This is the idea of energy quantization as put forward by Neill Bohr.

The wavelength can be obtained by the use of the formula;

1/λ = RH(1/n^2initial - 1/n^2 final)

λ = wavelength of the emitted light

RH = Rydberg's constant

n intial = initial energy level

nfinal = final energy level

Thus;

1/λ = 1.09 * 10^7(1/1^2 - 1/2^2)

1/λ = 1.09 * 10^7( 1 - 0.25)

λ = 122 nm

Learn more about the wavelength:https://brainly.com/question/13533093

#SPJ1

Answer:

80 ml

Explanation:

Moles to start =  .04 L * .6 M/L = .024 moles

   this is how much must be in the final dilution

         .2 moles / liter * x liter  = .024 moles

                x = .024 / .2 = .12   liter final volume

           start with   . 040    then add .080   to get .12 liter

  .080 liter = 80 ml