A thin-walled hollow sphere has a radius 4cm from the center
of the sphere, the eletric field points radially inward and
has a magnitude of 1.5 × 10^4NC^-1 How much charge is on the surface

The rate energy is consumed this statement describes power.

Hence, Option C is correct answer.

Power is related to energy by that it is the rate at which energy is transferred.

It is a measure of the rate at which work is done.

According to the definition of power, Power is the amount of energy transferred or converted or consumed per unit time.

SI unit of power is watt.

By definition, 1 watt is equal to one joule of work done per second. So if P represents power in watts, E is the change in energy (number of joules) and t is the time taken in seconds then:

P=[tex]\frac{E}{t}[/tex]= [tex]\frac{1 Joule}{1 Second}[/tex]= 1 Watt.

Thus from the above conclusion we can say that, The rate energy is consumed describes power.

Hence, Option C is correct answer

Learn more about Power and energy here:

https://brainly.com/question/1634438

#SPJ1

Answer: Downstroke: When the handle of a water pump is lifted up, the piston is pushed down. It is downstroke of the piston. In this condition, the volume of part A decreases and water pressure increases in this part. The increased pressure shuts the valve ‘A’ and opens the valve ‘B’ It makes the water of part A into pass part B of the cylinder.

Upstroke: When the handle is pushed down, it lifts the piston up. It is upstroke. During upstroke, the volume of part A increases and water Downstroke Upstroke pressure at that part decreases. It makes valve A opened and valve B closed. Thus, the water from the source enters into part A of the cylinder. The water of part B is lifted up and it comes out from the spout.

Explanation:

(a) Converting 45.0° to radians is 0.785 radian.

(b) Converting 13.0 rad to revolutions is 2.1 rev.

(c) Converting 76.5 revolution per minute to rad/s is 8.02 rad/s.

To convert 45.0 degrees to radians, we use the following method;

180⁰ = π radians

45⁰ = ?

= (45 x π)/180

= 0.785 radian

2π radians = 1 rev

13 radians = ?

= (13)/(2π)

= 2.1 rev

= 76.6 rev/min x 2π rad/rev x 1 min/60 s

= 8.02 rad/s

Thus, converting 45.0° to radians is 0.785 radian.

Converting 13.0 rad to revolutions is 2.1 rev.

Converting 76.5 revolution per minute to rad/s is 8.02 rad/s.

Learn more about revolution per minute here: https://brainly.com/question/11801946

#SPJ1

The electric filed in V/m is 1.58 * 10^6 V/m

We know that the electric field is obtained as the ratio of the voltage to the distance that separates the plates.

Thus;

E = V/d

E = electric field

V = voltage

d = distance of separation

E = 24 * 10^3 V/1.52 * 10^-2 m

E = 1.58 * 10^6 V/m

Learn more about electric field :https://brainly.com/question/8971780

#SPJ1

Answer:

Total mass of combination = 2+3+5 = 10kg.

Acceleration produced = 2m/s^2

hence force =( total mass × acceleration)= (2×10)= 20 N.

Net force on 3kg block = acceleration × mass = (2 × 2 )= 4 N

applied force on 2 kg block = 20N

Force between 2 kg and 3 kg block = (20-4) = 16N. ans

Net force on 3 kg block = 3 × 2 =6N.

Applied force on 3 kg block due to 2 kg block = 16N.

hence, force between 3 kg and 5 kg block = (16-6) = 10N .

answers:-

(a) 20 N

(b) 16N

(c) 10 N

It is useful to use a model in order to demonstrate how an electric circuit works.

In science, a model is a graphical representation that my result useful to predict the behavior of the components of a given system that works together to produce a particular outcome.

For example, an electrical circuit can be modeled by taking into account resistance, voltage, and intensity as parameters of functioning.

The electrical circuits are graphically represented by modeling the movement or flow of negatively charged electrons (e-) from the negative pole to the positive pole of a closed electric circuit.

In conclusion, it is useful to use a model (ie., a scientific model) to demonstrate how an electric circuit works.

Learn more about scientific models here:

https://brainly.com/question/13134745

#SPJ1

Answer:

by using a magnetic field

Use a magnet to attract the iron fillings from the sand!

Hope this helps!

Since T = 2πm/Be the period of revolution of the electron is independent of velocity and radius of path

For an electron moving in a uniform magnetic field, the force on the electron is given by

F = Bev where

Also, this magnetic force equals the centripetal force on the electron, F'

F' = mv²/r where

Since both forces are equal,

F = F'

Bev = mv²/r

Be = mv/r

We know that angular speed, ω = v/r. So,

Be = mω

Also, angular speed, ω = 2π/T where T = period of revolution of electron

So, Be = m2π/T

Making T subject of the formula, we have

T = 2πm/Be

so, since T = 2πm/Be the period of revolution of the electron is independent of velocity and radius of path

Learn more about period of revolution of electron here:

https://brainly.com/question/17081554

#SPJ1

Answer:

When an object is immersed in water. it is pulled downwards due to gravitational pull of earth. Water exerts upward force on the object. This makes object rise up. This upward force is called buoyancy or upthrust.

Answer:

Using the relation V^2 = U^2 + 2× a× S

V^2 = 50^2 + (2× 5 × 240 )

V^ 2 = 2500 + 2400

V^ 2 = 4900

V= (4900)^0.5 = 70 m/s

hence, velocity at a distance of 240 m will be 70m/s.

Now using the relation,

V= U + a× t

70 = 50 + 5 × t

20 = 5 × t

t = 20/5 = 4m/s

hence , time required to travel a distance of 240m will be 4s.

Answer: R=

A

2

+B

2

+2ABcosθ

​

θ=90

o

cos90

o

=0

R=

A

2

+B

2

​

=

3N

2

+4N

2

​

=5N

Explanation:

A bottle of water weighs 25 pounds. If the bottle weighs 5 pounds, then it contains  0.599132136584 gal .

A bottle weighs 25 pounds ,

we know that 1 Gallon = 8.34 Lb

so, 25 lb = 2.995660682922 gal

and if the bottle weighs 5 pounds then ,

5 lb = 0.599132136584 gal

hence, 2.4 gal less.

Define pound.

a. a unit of weight equivalent to l6 ounces avoirdupois (453.59237 grams), the fundamental unit of weight in the FPS system;

b. a unit of weight equal to 12 ounces troy or 12 ounces apothecaries' (373.2418 grams).

It is an imperial unit of mass or weight measurement.

Define gallons.

In both imperial and US customary units, the gallon is a unit of volume.

Learn more about pounds and gallons here:-

https://brainly.com/question/1462470

#SPJ1

[tex]E = \int\limits^2_{-3} {} \, \frac{27dy}{( 4 - y)^2}[/tex] is the integrals for the magnitude of the electric field.

A characteristic of electricity exists at every location in space when charge of any kind is present. The value of E, often known as the electric field strength, electric field intensity, or just the electric field, expresses the strength and direction of the electric field.

The formula for the electric field due to a point charge is:

[tex]E = \frac{kq}{r^2}[/tex]

Here q is the charge, r is the distance from the charge, and k = 8.99 × [tex]10^9 Nm^2/ C^2[/tex]

Imagine an infinitely - tiny portion of this charge distribution that has a charge [tex]dq[/tex]. This charge produces an electric field dE with magnitude:

                           [tex]\int\limits^ {} \, dE = \int\limits^ {} \, \frac{k dq}{r^2}[/tex]

                               [tex]E = \int\limits^ {} \, \frac{k dq}{r^2}[/tex]

Here, λ = 3.0 nC/m dq

           = λ.dy dE = ∫k.dq

From y = -3 m to y = 2 m, there is a 3.0 nC/m uniform linear charge distributed along the y axis.

The integrals for the magnitude of the electric field at y = 4 m on the y axis:

[tex]E = k \lambda \int\limits^2_{-3} {} \, \frac{dy}{( 4 - y)^2}[/tex]

[tex]E = \int\limits^2_{-3} {} \, \frac{27dy}{( 4 - y)^2}[/tex]

Learn more about electric field here:

https://brainly.com/question/14372859

#SPJ1

The volume of the tire at the given diameter and thickness of tube is determined as  1,128.2 cubic inch.

Volume is a scalar quantity expressing the amount of three-dimensional space enclosed by a closed surface.

The volume of the tire is the measure of the product of area and thickness of the tire.

The volume of the tire is calculated as follows;

Radius of the tire = 0.5 x 26" = 13"

Volume of the tire = Area x thickness

Volume of the tire = πr² x h

where;

Volume of the tire = π(13)² x (2.125)

Volume of the tire =  1,128.2 cubic inch

Thus, the volume of the tire at the given diameter and thickness of tube is determined as  1,128.2 cubic inch.

Learn more about Volume of tire here: https://brainly.com/question/1972490

#SPJ1

Answer:

Electrical force

Explanation:

The electrons aren't actually touching each other. Normal is something on something pushed by gravity by they are touching, frictional is rubbing, applied is pushing

Answer:

C

Explanation:

Gravity is the main reason that make our planets to pull each other

He observes that "There are no miracles. There's no such thing as fate. Nothing's meant to be." this is a false statement.

The term miracle is known to be something that is said to be an extraordinary event and it is one that often manifest in a kind of a divine intervention in the lives and affairs of human such as healing miracles, miracle jobs, miraculous meeting, etc.

Note that bad things that happens to people often makes them not to believe in the extraordinary but it does exist.

Hence, He observes that "There are no miracles. There's no such thing as fate. Nothing's meant to be." this is a false statement.

Learn more about fate from

https://brainly.com/question/14294848

#SPJ1

Answer:

No you can't cuz,if you put water instead of clock oil in Millikan oil drop your experiment will fail and it won't turn out the way you wanted it to be

Answer:

Explanation:

Binding energy, amount of energy required to separate a particle from a system of particles or to disperse all the particles of the system. Binding energy is especially applicable to subatomic particles in atomic nuclei, to electrons bound to nuclei in atoms, and to atoms and ions bound together in crystals.

As mass increases, the following which is found to be always true is a corresponding increase in the inertia and is therefore denoted as option C.

This is defined as the property of a body to resist changes in velocity or motion. Such feature is characterized by the body having the tendency to remain at rest or in uniform motion unless an external force acts on it.

When mass increase, inertia also increases due to the large amount of force which is needed to change the direction or motion of a body in this scenario. On the other hand, when mass decreases, there is a corresponding decrease in the inertia which is present in a given body over a period of time.

This is therefore the reason why mass of a body is directly proportional to its inertia and makes it the most appropriate choice.

Read more about Inertia here https://brainly.com/question/1140505

#SPJ1

Free Fall under gravity and time of meeting is used to find out the required answer.

∴ Let us assume, the upward direction to be positive and and downward direction to be negative.

Given, Velocity of P, = 40m/s

Distance travelled by P,

∴Using First Equation of motion for particle P,

v = u + at

⇒ 0 = 40 + (-10)t

⇒ t = 4s  ; which is the time taken by P to rise up

Now, Maximum Height(s) reached by particle P,

∴Using second equation of motion,

s = ut + 1/2at²

⇒ s = 40×4 + 1/2 × (-10) × 4²

⇒ s = 80m

a) Particle P is falling when Q is shot up after 4s from the initial time

∴ Using third equation of motion using Free Fall under Gravity,

V² = U² + 2aH₁

⇒ H₁ = 15² - 0/ 2(-10)

⇒ H₁ = 11.25m

Hence, Particle P and Q meet at a distance (H₂) from ground,

∴ Height, H₂ = s - H

⇒ H₂ = 80 - 11.25 = 68.75m

Hence, Particle P and Q meet at a distance of 68.75m from ground.

∴ Using First equation of motion for Particle P using the Time of Meeting,

v = u + at₁

⇒ 15 = 0 + (-10) t₁

⇒ t₁ = 1.5s  ; which is equal to the fall time of P and Rise time of Q

b) For particle Q

∴ Using second equation of motion,

H₂ = u₂t₁ + 1/2at₁

⇒ 11.25 = u₂ × 1.5 + 1/2 (-10) × 1.5

⇒ u₂ = 15 m/s

Hence, the Velocity with which Particle Q was shot is 15m/s in the upward direction.

Learn more about Free Fall under gravity here, https://brainly.com/question/13299152

#SPJ1

Answer: By dividing airflow by duct cross section.

Explanation:

In short, air velocity in the ducts is calculated by dividing airflow by duct cross-section. Airflow is expressed as a simple number. Example: Air conditioner has a max. airflow of 600 CFM.

(a) The position of the coin placed next to the convex side of a thin spherical glass shell is 3.68 cm.

(b) The size of the image is 1.8.

The position of the coin placed next to the convex side of a thin spherical glass shell is calculated as follows;

1/d = 1/f - 1/d'

where;

Focal length = r/2 = 17 cm / 2 = 8.5 cm

1/d = 1/8.5 - (-1/6.5)

1/d = 1/8.5 + 1/6.5

1/d = 0.1176 + 0.1538

1/d = 0.2714

d = 1/0.2714

d = 3.68 cm

Magnification, M = d'/d

M = (6.5)/(3.68)

M = 1.8

Thus, the position of the coin placed next to the convex side of a thin spherical glass shell is 3.68 cm.

The size of the image is 1.8.

Learn more about magnification here: https://brainly.com/question/1599771

#SPJ1

The constant angular acceleration (in rad/s²) of the centrifuge is 255.66 rad/s².

The constant angular acceleration of the centrifuge is calculated as follows;

ωf² = ωi² - 2αθ

where;

When the centrifuge is switched off, the final angular velocity = 0

Initial angular velocity: ωi = 3,750 rev/min x 2π rad/rev x 1 min/60 s = 392.7 rad/s

angular displacement: θ = 48 rev = 48 rev x 2π rad/rev = 301.6 rad

0 = ωi² - 2αθ

2αθ = ωi²

α = ωi²/2θ

α = (392.7²) / (2 x 301.6)

α = 255.66 rad/s²

Thus, the constant angular acceleration (in rad/s²) of the centrifuge is 255.66 rad/s².

Learn more about angular acceleration here: https://brainly.com/question/25129606

#SPJ1

The amount of time required for reflected sunlight to travel from the moon to the earth according to the given distance between then and the speed of light is; 1.28 seconds.

It follows from the task content that the time required for the reflected sunlight to reach the earth can be evaluated if the speed of light is known in which case, the speed of light, c = 3× 10⁸ m/s.

Consequently, we have time taken, t evaluated as follows;

Time taken, t = distance/speed

t = 3.85 ×10⁵ × 10³/3× 10⁸

t = 3.85/3

t = 1.28 seconds.

Read more on speed of light;

https://brainly.com/question/104425

#SPJ1

At point E

The energy of a roller coaster could either be potential energy, kinetic energy or a combination of both potential and kinetic energy.

Using analogies, the energy of the roller coaster at point E can be compared to a falling fruit from a tree which falls onto a pavement and is the rolling towards the floor. Point E can be compared to the midpoint of the fall of the fruit.

At point E

In conclusion, the energy of the rollercoaster at E is both Kinetic and potential energy,

Learn more about potential and kinetic energy at: https://brainly.com/question/18963960

#SPJ1

Answer:

the stomach has too much oxygen stored inside

From the first circuit (see attached), it is correct to state that I₄ = 40mA. See the explanation below.

A path that is designed to transport electric current is that is referred to as a circuit.

I = 200mA

= 20mA + 140mA + I₄

I₄ = 200 - 160

I₄ = 40mA

From the above, we can rightly posit:

R₄ = 3/(40x 10⁻³)

= 75 Ω

Hence

V₆ =  V₄ - V₅

= 3v - 2v

= 1v

R₆ therefore, =

V₆/I₆

= 1/ (40 x 10 ⁻³)

= 14.28 Ω

I₃ = I₄ + I₆

= 40 + 140

= 180mA

R₃ = 9/(180 x 10⁻³)

= 50Ω

R₂ = 12/20 x (10⁻³)

= 60 Ω

Then,

Vbattery =

200 x 10⁻³ x90

= 18 volts

The above indices is used to complete the image. See Circuit Image II.

Learn more about Circuits:
https://brainly.com/question/27206933
#SPJ1

Answer:

The magnitude of a torque about a fixed axis is calculated by finding the lever arm to the point where the force is applied and using the relation |→τ|=r⊥F | τ → | = r ⊥ F , where r⊥ is the perpendicular distance from the axis to the line upon which the force vector lies.

Explanation:

:)