Cu + 2NO₃⁻ + 4H⁺ → Cu⁺² + 2NO₂ + 2H₂O this is the balanced chemical equation in acidic medium.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now write the given equation
Cu + NO₃⁻ → Cu⁺² + NO₂
Here we can see that all atoms other than O and H are balanced.
In the given equation oxidation number of Cu changes from 0 to +2.
In the given equation oxidation number of N changes from 5 to 4.
Now multiply by 2 with NO₃⁻ and NO₂.
Cu + 2NO₃⁻ → Cu⁺² + 2NO₂
Now ad the water molecules in right hand side to balanced the O atoms.
Cu + 2NO₃⁻ → Cu⁺² + 2NO₂ + 2H₂O
Now add 4H⁺ on the left hand side to balance the H atoms.
Cu + 2NO₃⁻ + 4H⁺ → Cu⁺² + 2NO₂ + 2H₂O
Thus from the above conclusion we can say that Cu + 2NO₃⁻ + 4H⁺ → Cu⁺² + 2NO₂ + 2H₂O this is the balanced chemical equation in acidic medium.
Learn more about the Balanced Chemical Equation here: brainly.com/question/26694427
#SPJ4
How many electrons are shared between one nitrogen atom and one carbon atom? two three six seven
the nitrogen and the carbon are sharing six electrons! A single bond is created when two atoms share two electrons. If they share four, their bond is doubled. These two are actually sharing a six, which is a triple bond.
How many electrons does the carbon atom share?By sharing four pairs of electrons through the formation of four covalent bonds, carbon fills its outer energy level and achieves stability.
How many electrons do nitrogen atoms share?Only the nitrogen atoms' valence shells are taken into account while thinking about the bonding in a nitrogen molecule. Eight electrons can fit in total in nitrogen's outer shell. Therefore, the nitrogen atoms share three electrons each in order to produce the most stable structure.
What holds carbon and nitrogen together?One of the most frequent bonds in organic chemistry and biochemistry is the covalent bond between carbon and nitrogen. With five valence electrons, nitrogen is trivalent in simple amines, with the two extra electrons forming a lone pair.
learn more about covalent bond here
https://brainly.com/question/3447218
#SPJ4
How many protons, neutrons and electrons, in that order are present in the anion formed by one atom of 79se? group of answer choices 34, 34, 45 34, 45, 34 32, 45, 34 34, 45, 36 36, 45, 36
There are 34 protons , 45 neutrons and 36 electrons, in that order are present in the anion formed by one atom of 79Se .
Calculation
The number of electron / protons ( present in the nucleus ) of the atom is equal to atomic number .
The sum of number of electron / protons ( present in the nucleus ) and neutrons ( present in the nucleus ) of the atom is called atomic mass.
The atomic number of Se = 34
The Mass number or atomic mass of Se = 79
The anion of Se = [tex]Se^{-2}[/tex]
It means two electron loss by Se and form [tex]Se^{-2}[/tex] .
So , the difference between number of electrons and protons = 2
Hence , number of electron and proton in [tex]Se^{-2}[/tex] anion is 34 ( two less than number of protons ) and 36
To learn more about neutrons please click here .
https://brainly.com/question/1255220
#SPJ4
Draw the major organic product(s) of the reaction of p-bromoaniline with ch3i (excess)
The major product is p-bromo N,N,N -trimethylaniliniumiodide when p-bromoaniline react with excess CH₃I.
When p-bromoaniline react with methyl iodide it produces p-bromo N,N-dimethylaniline.
What happens when p-bromo N,N-dimethylaniline. reacts with excess methyl iodide ?When p-bromo N,N-dimethylaniline reacts with excess methyl iodide leading to the production of p-bromo N,N,N -trimethylaniliniumiodide.
Thus from the above conclusion we can say that The major product is p-bromo N,N,N -trimethylaniliniumiodide. when p-bromoaniline react with excess CH₃I.
Learn more about the Alkylation here: https://brainly.com/question/27927775
#SPJ4
What are Catalyst? What is the definition of Catalyst
Answer:
a substance that increases the rate of a chemical reaction without itself undergoing any permanent chemical change
a catalyst is a substance that increases the speed of reaction by lowering the activation energy or providing an alternative pathway of a lower activation energy(more likely for enzymes in bio).
it also doesnt take part in the reaction but in chemistry, there are homologous and homogenous catalysts where some may take part in the rxn BUT they are regenerated and are not used up
chem: more particles will have the energy to overcome the activation energy, resulting in a higher frequency of effective collision, so the rate of rxn ↑. (usually catalyst is transition metal)
bio: enzyme-substrate complex, where it is essentially what happens in the chemistry part above but the conclusion is that it takes lesser time for nutrients to be broken down and therefore digested.
Which of the first 20 elements in a Periodic table has atoms with the greatest mass?
An overpack containing four one-liter metal cans of NA1993, Compounds, cleaning liquid, a Class 3 (Flammable liquid), PG III, being offered for transportation by highway, may qualify for _______________
An overpack containing four one-liter metal cans of NA1993, Compounds, cleaning liquid, a Class 3 (Flammable liquid), PG III, being offered for transportation by highway, may qualify for specification packaging. This is further explained below.
What is specification packaging?Generally, The term "specification packaging" refers to a package that meets one of the packaging specifications or standards listed in this subchapter's parts 178 or 179.
In conclusion, It's possible that an overpack that contains four metal cans of one liter each filled with NA1993, Compounds, cleaning liquid, a Class 3 (Flammable liquid), PG III, and that's being provided for transportation on the highway might qualify as specified packing.
Read more about specification packaging
https://brainly.com/question/15494046
#SPJ1
The solutions that are used in this experiment have alcohols as both the solvent and the reactant. How is the excess alcohol removed?.
Excess alcohol is removed by Vacuum filtration.
What is vacuum filtration?Vacuum filtration is a methodology where a tension differential is kept up with across the channel medium by clearing the air beneath the channel paper. Vacuum filtration gives a power on the arrangement notwithstanding that of gravity and builds the pace of filtration. Vacuum filtration is the standard strategy utilized for isolating a strong fluid blend when the objective is to hold the strong (for instance in crystallization).How do you dry a product after vacuum filtration?The strong can be dried rapidly by washing the strong with an unpredictable fluid (methanol, CH3)2CO, or ether are normal) that the strong won't break up in. In the event that the filtrate is to be gathered, change the getting jar prior to washing.To learn more about vacuum filtration from the given link
https://brainly.com/question/24082009
#SPJ4
What amino acid is formed using the n-phthalimidomalonic ester synthesis when the following alkyl halides are used in the third step?.
Leucine and methionine are the amino acids formed using the n-phthalimido malonic ester synthesis.
The steps involved in phthalimido malonic ester synthesis:
Step 1: Deprotonation To Give An Enolate
In the first step, a base (CH3O– in this case) removes the most acidic proton from the ester (on C2 here, with a pKa of about 13) to give an enolate. The resulting enolate can be drawn as one of two resonance forms.
Step 2: SN2 Reaction Of The Enolate Nucleophile With An Alkyl Halide Electrophile.
Enolates are great nucleophiles. In the second step, the enolate acts as a nucleophile in an SN2 reaction to form a new C-C bond.
Step 3: Acidic Ester Hydrolysis
Acid and water are added to perform the aqueous hydrolysis of the ester to a carboxylic acid.
Step 4: Decarboxylation To Give An Enol
When carboxylic acids have a carbonyl group (C=O) two bonds away, they can readily lose carbon dioxide, because the carbonyl can act as an electron “sink” for the pair of electrons coming from the breaking C–C bond, forming an enol. This is called “decarboxylation”. Note how this is also the case for carboxylic acids with a ketone two bonds away, so-called “β-keto acids”.
Step 5: Tautomerization Of The Enol Back To The Carboxylic Acid
The enol that is formed is not a stable species. It can undergo transformation into its constitutional isomer: in this case, a carboxylic acid. These two constitutional isomers are in equilibrium with each other, although the “keto” form (with the carbonyl group) is greatly favoured. This process is called "tautomerism".
To learn more about SN2 mechanism:https://brainly.com/question/7213902
#SPJ4
Pop is made up of three major parts (water, carbon dioxide, and sugar). Assume that all other ingredients are present in insignificant amounts. Explain how could you determine the moles and particles of water, carbon dioxide, and sugar in your pop. Be sure to show any necessary formulas in your answer.
If you were given the the total # of grams of all three compounds with the % of each molecular compound - H2O, CO2 and sugar [you would need to know the type of sugar in the Pop such as C12H22O11 as to find its MM (molar mass)]
To begin take the % of each compound x the total grams of all the compounds. For illustrative purposes let's say it works out to be 50 grams of H2O in the POP. The same would be. done for CO2 and for the sugar.
Step 1) With the mass of each you could determine the # of moles of each:
Example if the number grams of water in the sample is 50g, to determine the # of moles of water you would do the following - 50g H20 x 1 mol/18g H20 = 2.8 mol H2O The same technique would be used for the other compounds to find the # of moles.
Step 2) To find the representative particles of each(molecules, atoms) you would do the following:
as the example given of above for H20 - 50 grams you calculated as shown above to be the number of mol of H20 = 2.8mol
From the number of mol of H20, to determine the # of molecules of water you would set up the following:
2.8 mol H20 x 6.02 x 10^23/1 mol H2O = 1.69 X 10^24 molecules of H20.
The same would be done for CO2 and the sugar.
Step 3) Now to find the number of atoms of element of the compound taking for example the H2O example above:
Take the # of molecules of H2O found above and set it up in the following manner:
1.69 X 10^24 molecules H2O x 2 atoms H/1 molecule H2O = 3.38 x 10^24 atoms H
1.69 x 10^24 molecules H2O x 1 atom O)/1 molecule H2O = 1.69 X 10^24 atoms O
The same would be done for CO2 and for the sugar compound.
Click and hold the chemistry book. slide it down so its surface touches the surface of the physics book. then slowly move the chemistry book back and forth to simulate friction. what happens to the speed of the particles of the chemistry book?
The temperature of the chemistry book decreasing as the chemistry book slides across it is the difference when motion is slower.
What is Temperature?
Temperature is a unit used to convey hotness or coolness. It can be stated in terms of any number of arbitrary scales and indicates the direction in which heat energy will naturally flow, i.e., from a hotter body to a cooler body (one at a lower temperature). Temperature is not the same as the energy of a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at a much higher temperature.
What is relation between motion and temperature ?
When motion is slow , there is an decrease in friction and decrease in thermal(heat) energy which leads to decrease in temperature.
Read more about Temperature here :
brainly.com/question/2331658
#SPJ4
Answer:
The speed of the particles of the chemistry book increases when the chemistry book slides across the physics book.
Explanation:
edmentum
Why is it important to know if a substance is a molecular compound or an ionic compound before predicting its effect on the boiling and freezing points of a solvent?
It is important to know if a substance is a molecular compound or an ionic compound because the boiling and freezing points of a solvent are colligative properties, and they depend on the solute particles.
What are molecular and ionic compounds?Molecular compounds are pure things called that are created when atoms are joined by the sharing of electrons. Ionic compounds are formed by transferring electrons between the elements.
It is important to know the type of compounds before predicting because the more the solute particles the more the freezing point and lower the boiling points. And it tells how much amount f solute will be fine in the solvent.
Thus, knowing if a material is a molecular or ionic compound is crucial since a solvent's boiling and freezing temperatures are collaborative features that are dependent on the solute particles.
To learn more about molecular and ionic compounds, refer to the link:
https://brainly.com/question/8860494
#SPJ4
Please help,
How could you tell a Ca(NO3)2 solution from a Zn(NO3)2 solution?
Answer:
you better give me brainliest
Explanation:
Zinc nitrate and calcium nitrate solution can be distinguished by reaction with ammonium hydroxide. Zinc forms a white gelatinous ppt. whereas there is no precipitation of calcium hydroxide even with excess of ammonium hydroxide
I have a mixture of sand salt and water from the sea. Describe in detail how I separate these three substances and explain why each method works
Answer:
You can separate a mixture of sand, salt and water by decantation and evaporation. Decantation will separate sand from salt and water. Sand remains in the original vessel, whereas salt and water is transfered to new vessel. Evaporation will separate salt from water.
find the relative molecular mass of MgCo3
The molecular mass of MgCO3 is 84.313 grams/mol.
How Does The molecular Mass Calculator Work?The standard atomic weights for that element are listed in a table, and each atom is compared to those values. The molar mass calculator displays the findings in a table at the bottom that includes the number of atoms, the atomic weights of the constituent elements, and the molecule's molecular weight. It provides a solution for a molecular formula's overall mass.From there, we dissect the components of the formula for magnesium carbonate: an atom of magnesium, an atom of carbon, an atom of oxygen, etc.You will need to unpack any bracketed expressions because (yet) we don't have brackets implemented. They have no impact on weight in any case. Multiply each element by how many times the structure in brackets appears. For instance: C6H5-3PCCO becomes C18H15-3PCCO.The relative molecular mass of MgCo3
Symbol Mg C O
Atoms 1 1 3
Name Magnesium Carbon Oxygen
Atomic 12 6 8
Molar Mass 24.305 12.011 15.999
Total 24.305 12.011 47.997=84.313
The molecular mass of MgCO3 is 84.313 grams/mol.
To learn more about molecular mass, refer to:
https://brainly.com/question/837939
#SPJ9
Lithium metal reacts with nitrogen gas to form lithium nitride. identify the balanced reaction that describes this process
Lithium metal reacts with nitrogen gas to form lithium nitride the balanced chemical equation will be 6Li + N₂ → 2Li₃N.
What is a balanced chemical reaction?In a balanced chemical reaction, the number of moles that are present at the side of the reactant must be always equal to the side of product formation this is known as a balanced chemical equation.
The balanced chemical reaction will be 6Li + N₂ → 2Li₃N.
Here 6 moles of lithium is reacting with one nitrogen but as it is in gaseous state it is N₂ after reacting with lithium it will give two moles
Therefore, balanced equation will be 6Li + N₂ → 2Li₃N
Learn more about balanced chemical reaction, here :
https://brainly.com/question/15178192
#SPJ4
a balloon filled with .5l of air at sealevel is submerged in the water to a depth that produces a pressure of 3.25 atm. What is the volume of the balloon at this depth
The balloon is filled with 0.5L of air at sea level and submerged to a depth. Since, there is no change in the Temperature, the process is Isothermal. It is a process in which the temperature T of the given system does not change and remains constant. Hence, ΔT=0
Any system in which the temperature is kept constant is stated as an Isothermal Process. Since, in the given question, Temperature is not changing, hence we can consider it to be an Isothermal Process.
Given:
Pressure at sea level, P₁= 1 atm
Volume at sea level, V₁= 0.5L
Pressure at depth, P₂= 3.25 atm
Volume at depth, V₂= ?
Since, the process is Isothermal, hence,
∴ P₁V₁ = P₂V₂
⇒ 1 × 0.5 = 3.25 × V₂
⇒ V₂ = 0.5/3.25
⇒ V₂ = 0.154L
So, the Volume of balloon at the depth is 0.154L.
Learn more about, Isothermal Process here, https://brainly.com/question/12023162
#SPJ1
Why do you add hydroxide to your hexanediamine solution? what would occur if you did not add it?.
In the polymerization reaction, the lone pair electrons on the NH₂ groups of hexanediamine attack the C=O groups of the dicarboxylic acid in a nucleophilic substitution reaction as shown in the image.
Hydroxide is added to remove any H⁺ ions present and keep the hexanediamine in the deprotonated form, so that the NH₂ lone pair electrons are available for reaction.
What if you don't add it ?If hydroxide is not added, the NH₂ groups will get protonated by H⁺ ions present to give NH₃⁺ groups, which cannot react.
To view similar questions based on Hydroxide,refer to:
https://brainly.com/question/15683618
#SPJ4
The elements of group IA have been termed alkali metals because of their ___ alkaline.
The elements of group IA have been termed alkali metals because of their oxides and hydroxides form alkaline.
What is an element?An element can be defined as a substance which cannot be split into simpler units by ordinary chemical process
Below are some examples of elements:
HydrogenHeliumLithiumBerylliumBoronCarbonNitrogenOxygenFluorineNeonAlkali metals refers to any of the soft, light, reactive metals of Group 1 of the periodic table.
Periodic table refers to a tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same column.
So therefore, the elements of group IA have been termed alkali metals because of their oxides and hydroxides form alkaline.
Learn more about elements:
https://brainly.com/question/6258301
#SPJ1
Project 1 Hypothesis Construction
Write a properly formatted hypothesis statement to answer this question: How does the amount of salt added to ice affect the rate at which the ice will melt?
Specify how you plan to change the independent variable by using terms such as increase or decrease. Also, specify how the dependent variable will change in response by using terms such as increase, decrease, or stays the same.
Criteria pts
Correct placement of IV 5
Correct placement of DV 5
If, then format 5
IV indicates either "increases" or "decreases" 5
DV indicates either "increases", "decreases", or "stays the same" 5
The hypothesis should be; "Increasing the amount of ice increases the rate at which the ice will melt"
What is a hypothesis?The term hypothesis refers to a tentative explanation that could be applied in order to explain an observation. When we give a hypothesis, it must be subjected to rigorous experimentation thus it can be confirmed or repelled by experiment.
Now, we can see that the question here is; "How does the amount of salt added to ice affect the rate at which the ice will melt?" This implies that the correct hypothesis here ought to have to do with the impact of the amount of ice in the affirmative.
Thus, the hypothesis should be; "Increasing the amount of ice increases the rate at which the ice will melt"
Learn more about hypothesis:https://brainly.com/question/13025783
#SPJ1
Which of the following are considered to be
part of the study of chemistry?
SELECT ALL THAT APPLY
a
properties of matter
b changes to matter
C
interactions between living things
d composition of matter
Chemistry deals with elements and compounds. The properties of matter, changes to matter, and composition of matter are studied in chemistry. Thus, options a, b, and d are correct.
What is chemistry?Chemistry is said to be a scientific field under natural sciences that studies the structure, properties, and composition of matter. It includes atoms, elements, and compounds.
The chemistry includes topics like the properties of matter, including the volume, density, temperature, etc., changes to a matter involving condensation, freezing, vaporization, melting, etc.
The composition of matter including the sub-atomic levels is studied in chemistry. Whereas, the interactions between living things are studied in biology.
Therefore, options a, b, and d. the properties, changes, and composition are studied in chemistry.
Learn more about chemistry here:
https://brainly.com/question/5243081
#SPJ2
The ratios aren't matching, how do I find correct ratios?
overall equation is ,
2FeSo4+heat→Fe203+SO2+SO3
What is Decomposition Reaction ?Decomposition reaction is when Reactant break down into simpler parts .
For decomposition reactions require energy input. The decomposition reaction happens in our everday life. The process of digestion food is a type of decomposition ,where breakdown of food from larger to smaller particles and large amount of energy release.
The decomposition is classified into
*thermolysis
*Electrolysis
*photolysis
The overall equation will be
2FeSo4+heat→Fe2O3+SO3+So2
to learn more about Decomposition Reaction cluck herehttps://brainly.com/question/8009068
#SPJ9
What is the color of the indicator thymol blue in a solution that has a ph of 11?.
Answer:
Red
Explanation:
Red color is evidenced when thymol blue indicator is in a solution having a pH of 11. A pH of 11 means that the solution is basic or alkaline. Therefore, the indicator turns red, indicating that the solution is alkaline.
When thymol blue indicator is in a acidic solution, the indicator remains blue.
What kind of intermolecular forces act between a water molecule and a chloride anion?
The intermolecular forces are present between the molecules and allow their interactions. The ion-dipole force is present between the water and the chloride ion.
What is ion-dipole intermolecular force?Ion-dipole intermolecular forces are present when the molecules have an ion and a neutral molecule that can interlink through an electrostatic attraction. These forces are present in solutions.
The chloride ions have a negative charge, whereas the water molecule has a neutral charge. Water is a polar molecule that has a partial negative and positive charge that can bond with the anion (chloride ion).
Therefore, the water and the chloride ions have ion-dipole intermolecular forces.
Learn more about ion-dipole force here:
https://brainly.com/question/14173758
#SPJ4
A 500-ml glass beaker is filled to the brim with ethyl alcohol at a temperature of 5. 00ºc. how much will overflow when its temperature reaches 22. 0ºc?
The volume of ethyl alcohol overflow will be 9.265mL.
To calculate the volume of ethyl alcohol overflow, we will use
∆V=V(á∆T)
Where,
∆V=volume expand
á=volumetric expansion Coefficients =0.00109/°C
V=initial volume =500ml
T'=final temp. =22°C
T=initial temp=5°C
Now,
∆V=500×(0.00109/°C) ×(22-5)
=500×(0.00109) (17)
=9.265ml
Thus, we find that the volume of ethyl alcohol overflow will be 9.265 mL.
learn more about ethyl alcohol:
https://brainly.com/question/11237501
#SPJ4
A balloon is filled with 3. 00 l of helium at a pressure of 765 torr. What is the volume of the balloon at an altitude where the pressure is 530 torr if the temperature remains constant?
The volume of the balloon at an altitude where the pressure is 530 torr if the temperature remains constant is 4.33 L
Calculation,
According to Boyle law, the pressure of a given quantity of gas varies inversely with its volume at constant temperature.
[tex]P_{1} V_{1} =k[/tex] .....(i)
[tex]P_{1}[/tex] is initial pressure =765 torr
[tex]V_{1}[/tex] is initial volume = 3L
k is constant
[tex]P_{2} V_{2} =k[/tex] ....(ii)
[tex]P_{2}[/tex] is final pressure = 530 torr
[tex]V_{2}[/tex] is final volume =?
k is constant
Combining equation (i) and (ii). we get,
[tex]P_{1} V_{1} =P_{2} V_{2}[/tex]
765 torr × 3L= [tex]V_{2}[/tex] ×530 torr
[tex]V_{2}[/tex] = 765 torr × 3L/530 torr = 4.33 L
Boyle law used during respiration or breathing.
To Learn more about Boyle law
brainly.com/question/1437490
#SPJ4
What would the corresponding
concentration values of OH- be for
the pH values: 1, 3, 5, 7, 9, 11?
The corresponding concentration values of OH⁻ for the pH values
of following are -
1- 10⁻¹
3- 10⁻³
5- 10⁻⁵
7- 10⁻⁷
9- 10⁻⁹
11- 10⁻¹¹
What do you mean by the pH value ?
pH is a logarithmic measure of the hydrogen ion concentration of an aqueous solution pH = -log[H+]
pH describes how acidic or basic an aqueous solution is, where a pH below 7 is acidic and a pH greater than 7 is basic. pH of 7 is considered neutral .
Functions of OH− :
OH− functions as a base .
Hydroxide is a diatomic anion with chemical formula OH−. It consists of an oxygen and hydrogen atom held together by a single covalent bond, and carries a negative electric charge.
Hence, this way pH values of these concentrations are mentioned .
Learn more about pH values ,here:
https://brainly.com/question/1503669
#SPJ1
What may indicate that the pressure within a container is increasing and that container failure may be imminent?
Answer:
An increase in the intensity of sounds or fire issuing from a relief valve.
What does "contents under pressure" mean?Propane serves as the propellant in all aerosols. R-12, a Freon that was the previous propellant, has been outlawed because it harms the ozone layer above the poles. Propane and R-12 share the same pressure-temperature characteristics.
Propane's boiling point is quite low. It desires a boil-off at ambient temperature. And it continues to do so until the pressure inside a closed container rises to roughly 150 psi (give or take depending on temperature), at which time the boiling point is raised high enough to cause the substance to stop boiling.
"Contents Under Pressure" is exactly what the notice indicates. Paint, hairspray, lubricant, wasp and hornet spray, among other liquids, can be found within an aerosol can, which is a pressure vessel. By inspecting the bottom, you may determine whether a vessel is a pressure vessel. If it is dished in like a bowl, it has the same pressure-holding end as a huge propane tank, with the exception that the curve on the latter has an outward orientation. On aerosol canisters, it is inward because they must sit upright for ease. A circular bottom just cannot accomplish that. But the top resembles an outer hemisphere more or less.
Thank you,
Eddie
Why do night bird have extraordinary night vision
Answer:
The low light eye sight depends on the rod cells of the eye,and the birds have more amount of rod cell in their eyes, that's why they have an extraordinary night vision
A molecular orbital that decreases the electron density between two nuclei is said to be ____.
a. nonpolar
b. antibonding
c. pi-bonding
d. hybridized
e. bonding
A molecular orbital that decreases the electron density between two nuclei is said to be antibonding.
The bonding orbital, which would be more stable and encourages the bonding of the two H atoms into [tex]H_{2}[/tex], is the orbital that is located in a less energetic state than just the electron shells of the separate atoms. The antibonding orbital, which has higher energy but is less stable, resists bonding when it is occupied.
An asterisk (sigma*) is placed next to the corresponding kind of molecular orbital to indicate an antibonding orbital. The antibonding orbital known as * would be connected to sigma orbitals, as well as antibonding pi orbitals are known as [tex]\pi[/tex]* orbitals.
Therefore, molecular orbital that decreases the electron density between two nuclei is said to be antibonding.
Hence, the correct answer will be option (b)
To know more about molecular orbital
https://brainly.com/question/13265432
#SPJ4
If you reacted 93.7 grams of iron with excess copper sulfate solution, what mass of copper would you expect to make? you may need to balance the equation first. fe cuso4 -> cu feso4
Answer is although the question should have 3 significant figures.
What is significant figures? Chemical equationFe + CuSO4 --> Cu + FeSO4
It is already balanced
Molar ratios1 mol Fe : 1 mol CuSO4 : 1 mol Cu : 1 mol FeSO4
atomic masses of Fe and CuFe: 55.8 g/mol
Cu: 63.5 g/mol
number of moles of Fenumber of moles = mass in grams / atomic mass = 93.7 g / 55.8 g/mol = 1.679 mol
number of moles of Cu:1 mol Fe / 1 mol Cu => 1.679 mol Fe / 1.679 mole Cu
mass of Cu in 1.679 moles Cumass = atomic mass * number of atoms = 63.5 g/mol * 1.679 moles = 106.6 g = 107 rounded to 3 significant figures.
To learn more about significant figures, refer to:
https://brainly.com/question/24491627
#SPJ4