Let us consider a uniformly charged thin thread of length, L, which carries a total positive charge of Q and a cylinder of length, l, radius, r and permittivity of free space, εr, which is placed such that its axis coincides with that of the thread.
Now, we need to find the electric field at the surface of the cylinder which is due to the uniformly charged thread.
Let us use Gauss's Law to find the electric field at the surface of the cylinder:
∫E . dA = Q/εr
We know that the electric field E is radially outward, so the vector E and the vector d A are in the same direction, and so the dot product of the two vectors is equal to unity.
∫E . dA = ∫E dA cos θ
where θ is the angle between E and dA.
On the cylindrical surface, θ = 0°, as both E and dA are parallel.
∫E . dA = E ∫dA = 2πrlE
Using Gauss's Law:
∫E . dA = Q/εr
2πrlE = Q/εr
E = Q/(2πrlεr)
We know that the total positive charge of the thread is Q = 10 n C, the radius of the cylinder is r = 2 cm = 0.02 m, and its length is
l = 10 cm = 0.1 m.
Also, the permittivity of free space is εr = 8.85 × [tex]10^{-12}[/tex] F/m.
Substituting these values in the above expression for electric field E:
E = Q/(2πrlεr)
E = (10 × [tex]10^{-9}[/tex])/(2π × 0.018 × 0.02 × 8.85 × [tex]10^{-12}[/tex])
E = 25.8 N/C
Therefore, the electric field at the surface of the cylinder is 25.8 N/C.
To know more about length visit:
https://brainly.com/question/2497593
#SPJ11
The inductance of a closely packed coil of N turns is 2.0 ml. The magnetic flux through the coil is 1 uwb when the current is 20 mA. The number of turns N is a) 10 b) 20 c) 30 d) 40 e) 50
The number of turns N in the closely packed coil is d) 40, according to the given parameters.
To determine the number of turns N in the closely packed coil, we can use the formula for inductance:
L = (μ₀ * N² * A) / l,
where L is the inductance, μ₀ is the permeability of free space, N is the number of turns, A is the cross-sectional area, and l is the length of the coil.
Given that the inductance is 2.0 mH (millihenries), or 2.0 × 10⁻³ H, and the magnetic flux is 1 μWb (microweber), or 1 × 10⁻⁶ Wb, we can rearrange the formula:
N² = (L * l) / (μ₀ * A),
N² = (2.0 × 10⁻³ H * 1 × 10⁻⁶ Wb) / (4π × 10⁻ ⁷ H/m * A).
Since the units of H and Wb cancel out, we're left with:
N² = 5π * A,
where A is the cross-sectional area.
Now, we're given the current of 20 mA (milliamperes), or 20 × 10⁻³ A. The magnetic flux through the coil is given by:
Φ = L * I,
1 × 10⁻⁶ Wb = (2.0 × 10⁻³ H) * (20 × 10⁻³ A),
Simplifying, we find:
A = Φ / (L * I),
A = (1 × 10⁻⁶ Wb) / (2.0 × 10⁻³ H * 20 × 10⁻³ A),
A = 2.5 × 10⁻³ m².
Substituting this value back into the equation N² = 5π * A, we have:
N² = 5π * (2.5 × 10⁻³ m²),
N² ≈ 39.27.
Therefore, the number of turns N is approximately equal to the square root of 39.27, which is approximately 6.27. Since N must be a whole number, the closest option is 40 (d).
Learn more about Parameters
brainly.com/question/32612285
#SPJ11
An air-filled parallel-plate capacitor has plates of area 2.20 cm2 separated by 3.00 mm. The capacitor is connected to a(n) 21.0 V battery.
(a) Find the value of its capacitance. pF=
(b) What is the charge on the capacitor?
(c) What is the magnitude of the uniform electric field between the plates? N/C=
The magnitude of the uniform electric field between the plates is 7.00 × 10⁴ N/C.
Area of plates, A = 2.20 cm²
= 2.20 × 10⁻⁴ m²
Separation distance, d = 3.00 mm
= 3.00 × 10⁻³ m
Voltage applied, V = 21.0 V
(a) Value of Capacitance, C
The capacitance of an air-filled parallel plate capacitor is given as:
C = ɛ₀A/d
Where, ɛ₀ is the permitivity of free space = 8.85 × 10⁻¹² F/m
Therefore, the capacitance of an air-filled parallel plate capacitor is given as,
C = 8.85 × 10⁻¹² × (2.20 × 10⁻⁴)/3.00 × 10⁻³
= 6.49 pF
Therefore, the value of its capacitance is 6.49 pF
(b) Charge on the Capacitor
The formula to calculate the charge on a capacitor is given as,
Q = CV
Therefore, the charge on the capacitor is given by,
Q = 6.49 × 10⁻¹² × 21.0
= 1.36 × 10⁻¹⁰ C
Therefore, the charge on the capacitor is 1.36 × 10⁻¹⁰ C
(c) The magnitude of the uniform electric field between the plates is given by,
E = V/d
Where, V is the applied voltage = 21.0 V, and d is the separation distance = 3.00 × 10⁻³ m
Therefore, the magnitude of the uniform electric field between the plates is given by,
E = 21.0/3.00 × 10⁻³
= 7.00 × 10⁴ N/C
To learn more on electric field :
https://brainly.com/question/19878202
#SPJ11
Determine the specified property at the indicated state for H2O. Locate each state on a sketch of the T-v diagram.
(i) p= 300 kPa, v = 0.5 m3 kg-1. Find T' in °C.
(ii) p = 30 MPa, T = 200°C. Find v in m3 kg-1.
(iii) p= 1 MPa, T = 420°C. Find u in kJ kg-1
(iv) T=100°C, x = 0.6. Find v in m3 kg-1
Note: the critical pressure and critical temperature of H2O are equal to 22.09MPa and 374.14 respectively
Thermodynamics is a branch of physics that deals with the relationship between heat, work, and energy. It is applicable to a wide range of scientific disciplines, such as chemistry, mechanical engineering, and chemical engineering.
Using the steam tables we can find the value of T'. Therefore,T' = 115.63°C.
(ii) Given, p = 30 MPa, T = 200°C.
We need to find v in m3 kg-1.
For this problem, the given p and T are inside the "Superheated Vapor" phase region.
We can use the superheated steam tables to find the value of v.
Therefore,v = 0.1248 m3 kg-1
(iii) Here, p= 1 MPa, T = 420°C. We need to find u in kJ kg-1.
Using the steam tables, we can find the value of u.
Therefore,u = 3375 kJ kg-1.
(iv) We need to find v in m3 kg-1 when T=100°C, x = 0.6.
By using the steam tables, we can find the values of specific volume, specific internal energy, specific enthalpy, and specific entropy of the saturated liquid and vapor at the given temperature.
Then we can use the quality equation to find v.Therefore,v = 0.001028 m3 kg-1.
Learn more about Thermodynamics here ;
https://brainly.com/question/1368306
#SPJ11
Two 11.0Ω resistors are connected across the terminals of a 6.0 V battery, drawing a current of 0.43 A. a. A voltmeter is placed across the terminals of the battery. What is the reading on the voltmeter? (2) b. Calculate the internal resistance of the battery. (2)
a. The reading on the voltmeter placed across the terminals of the battery will be 6.0 V.
b. The internal resistance of the battery can be calculated as 5.6 Ω.
a. The reading on the voltmeter placed across the terminals of the battery will be the same as the battery's voltage, which is given as 6.0 V. This is because the voltmeter is connected directly across the terminals of the battery, measuring the potential difference (voltage) across it.
b. To calculate the internal resistance of the battery, we can use Ohm's law. The current flowing through the circuit is given as 0.43 A. The total resistance in the circuit can be calculated by adding the resistances of the two 11.0 Ω resistors connected in parallel, which gives a total resistance of 5.5 Ω.
Using Ohm's law, V = I * R, where V is the voltage, I is the current, and R is the resistance, we can rearrange the equation to solve for the internal resistance of the battery. Rearranging the equation, we have R = V / I. Plugging in the values of V as 6.0 V and I as 0.43 A, we can calculate the internal resistance as 5.6 Ω.
Therefore, the reading on the voltmeter will be 6.0 V and the internal resistance of the battery is 5.6 Ω.
Learn more about voltmeter here:
https://brainly.com/question/1511135
#SPJ11
Mass =?M⊕
Radius =1/2R⊕
Gravity =1 F⊕
• 1/4 x Earth's
• 1/2× Earth's
• 1× Earth's
• 2× Earth's
In the given expressions, M⊕ represents the mass of Earth, R⊕ represents the radius of Earth, and F⊕ represents the gravitational force on Earth.
Let's calculate the values based on the provided ratios:
1/4 x Earth's:
If we consider 1/4 x Earth's mass, the mass would be:
Mass = (1/4) x M⊕
1/2 × Earth's:
If we consider 1/2 × Earth's mass, the mass would be:
Mass = (1/2) x M⊕
1 × Earth's:
If we consider 1 × Earth's mass, the mass would be:
Mass = 1 x M⊕ = M⊕
2 × Earth's:
If we consider 2 × Earth's mass, the mass would be:
Mass = 2 x M⊕
Now, let's calculate the values for radius and gravity based on the given ratios:
Radius = 1/2R⊕:
If we consider 1/2 of Earth's radius, the radius would be:
Radius = (1/2) x R⊕
Gravity = 1 F⊕:
If we consider 1 times the gravitational force on Earth, the gravity would be:
Gravity = 1 x F⊕ = F⊕
To learn more about mass of Earth follow:
https://brainly.com/question/30501849
#SPJ11
A string of length L is displaced at its midpoint by a distance d and released at t=0. Find the first two normal modes that are excited and their amplitudes in terms of the initial displacement d.
The amplitude of the third normal mode is given by: (4d/3π) * sin(3πx/L). The wave equation of a string is given by :∂²y/∂x² = (1/v²)∂²y/∂t², where y is the displacement of the string, v is the velocity of the wave in the string, t is time and x is the position of any element in the string.
Using the general solution for the wave equation as y(x,t) = Σ(Ancos(nπvt/L) + Bnsin(nπvt/L)), we get, y(x,t) = Σ(An + Bncos(nπvt/L))sin(nπx/L), where An and Bn are constants of integration.
We have the following initial condition:y(L/2, 0) = dIf we apply this initial condition in the expression of y(x,t),
we get: y(x,t) = 4d/π * [sin(πx/L) + (1/3)sin(3πx/L) + (1/5)sin(5πx/L) + ...] * cos(πvt/L) (odd function).
Therefore, the string has odd symmetry.
Hence, only odd harmonics are present and the wave has the fundamental frequency and its odd harmonics. Therefore, the first two normal modes that are excited are: n = 1 and n = 3.
The amplitude of the first normal mode (fundamental frequency) is given by: 4d/π * sin(πx/L).
The amplitude of the third normal mode is given by: (4d/3π) * sin(3πx/L).
Learn more about wave equation here ;
https://brainly.com/question/4692600
#SPJ11
3 bulbs are in series and the same 3 bulbs are in parallel with
the same battery. Which battery will run out faster?
A. Parallel
B. Series
C. The same
D. Not enough info
When three bulbs are in series and the same three bulbs are in parallel with the same battery, the battery in the parallel circuit will run out faster. The correct option is A.
What are series and parallel circuits?A series circuit is a type of circuit in which there is just one path for current to flow. Components in a series circuit are connected in a sequential manner, such that the current flows through one component before moving on to the next.
Parallel circuit, on the other hand, has multiple paths for the current to flow. Components in a parallel circuit are connected such that each component is connected across the same voltage.
A battery will run out faster in the parallel circuit than in the series circuit because in the parallel circuit, the bulbs will have more current running through them than they do in the series circuit. This is due to the fact that in the parallel circuit, each bulb receives the full voltage from the battery, and the total current is divided among the bulbs. So, as more bulbs are added to the parallel circuit, the total current through the circuit increases, resulting in a quicker depletion of the battery.
To know more about series and parallel circuits, refer to the link below:
https://brainly.com/question/14997346#
#SPJ11
Evaluate the magnitude of the net magnetic force on a current loop of l
1
=2.7R,l
2
=9.6R, and r=7R in an external magnetic field
B
=4.1B
o
(−
j
^
) in terms of B
o
RI. Express your answer using two decimal places. Please note that a current of 3I runs on the wire.
The magnitude of the net magnetic force on a current loop is given by the formula:
F=BIl SinθThe current is 3I, so I = 3I.
The radius of the loop is r = 7R.
The length of the wire is l1 = 2.7R and l2 = 9.6R
The total length of the wire is L = l1 + l2 = 2.7R + 9.6R = 12.3R
The wire is in a magnetic field of B = 4.1Bo(-j) .
Thus, the magnitude of the net magnetic force on a current loop is given by:
F = BIL Sinθ
The current I = 3I
The length of the wire L = 12.3R
The magnitude of the magnetic field
B = 4.1Bo (-j)
F = BIL Sinθ = 4.1Bo (-j) × 3I × 12.3R × sin 90° = 15.15BI R
(Answer)
Therefore, the magnitude of the net magnetic force on a current loop of l1 = 2.7R, l2 = 9.6R, and r = 7R in an external magnetic field B = 4.1Bo (-j) in terms of Bo IR is 15.15.
To know more about magnetic visit :
https://brainly.com/question/13026686
#SPJ11
Three identical metallic spherical objects have individual charges of, q1 = -9.612 nC, q2 = +3.204 nC and q3 = +6.408 nC. If the three objects are brought into contact with each other at the same time and the separated, determine: a) the final net charge on q1 = __________ nC; b) the final net charge on q2 = __________ nC; c) the final net charge on q3 = __________ nC; d) the number of electrons that were removed from/added to q1 = __________ electrons were __________ q1.
Given three identical metallic spherical objects have individual charges of, q1 = -9.612 nC,
q2 = +3.204 nC,
and q3 = +6.408 nC.
If the three objects are brought into contact with each other at the same time and then separated, the final net charge on q1, q2, and q3 will be calculated as follows;
Initial total charge, Q = q1 + q2 + q3
Q= -9.612 nC + 3.204 nC + 6.408 nC
Q= -0.002 nC
The final net charge on q1, q2, and q3 is same as they are identical:
q1 + q2 + q3 = -0.002 nC
q1 = q2 = q3 = -0.002 nC/3
q1 = -0.0006667 nC
Therefore, the final net charge on q1, q2, and q3 is -0.0006667 nC.The charge on q1 before and after is -9.612 nC and -0.0006667 nC respectively. The difference is the number of electrons that were removed from/added to q1. The number of electrons can be calculated as follows;
Charge on an electron,
e = 1.6 ×[tex]10^{-19[/tex] C
Total number of electrons removed from
q1 = [(final charge on q1) - (initial charge on q1)] / e
q1 = [-0.0006667 - (-9.612)] / 1.6 × [tex]10^{-19[/tex]
q1 = 6.0075 × 1013
The number of electrons removed from q1 is 6.0075 × 1013, and electrons were removed from q1. Thus, option d is,
"The number of electrons that were removed from q1 = 6.0075 × 1013 electrons were removed from q1."
To know more about individual visit:
https://brainly.com/question/32647607
#SPJ11
Ро EO (1 – e-ax), where po and a are (b) The electric potential is given by the relation: V(x) constants. (i) Find the electric field intensity. (ii) If the medium permittivity is given by E(x) the volume charge density. = Egeax, determine the flux density, and (10 marks) (Total : 25 marks)
Given that:ρ = ρo (1-e⁻ᵃˣ) electric potential: V(x) electric field intensity: E(x) flux density: D(x)Medium permittivity: εVolume charge density:
ρVolumetric charge density is the quantity of electric charges per unit volume. It is measured in coulombs per cubic metre (C/m³). It is given by:ρ = dV/dVWhere V is the volume. Electric flux density is the electric flux per unit area. It is measured in coulombs per square metre (C/m²). It is given by:D = εEFrom Gauss’s law, the flux density through a closed surface is proportional to the charge enclosed. That is:Φ = Q/εWhere Q is the charge enclosed in the surface and Φ is the flux passing through the surface. It implies that the electric flux density can be determined using the charge enclosed.The electric field intensity is given by:E(x) = -dV/dxFrom the electric potential given,V(x) = ρo / a [1 - e⁻ᵃˣ]dV/dx = ρo / a e⁻ᵃˣE(x) = -ρo / a e⁻ᵃˣThe medium permittivity is given by:ε(x) = εeᵍᵉᵃˣWe are to determine the flux density. The charge density is given by:ρ = ε(dE/dx) = -ερo e⁻ᵃˣThe flux density is given by:D(x) = εE(x) + ρD(x) = ε(-ρo / a e⁻ᵃˣ) + (-ερo e⁻ᵃˣ)D(x) = -2ερo / a e⁻ᵃˣTherefore, the electric field intensity is E(x) = -ρo / a e⁻ᵃˣ, the flux density is D(x) = -2ερo / a e⁻ᵃˣ.
To Learn more about measured Click this!
brainly.com/question/33224621
#SPJ11
A bullet of mass 20g travelling at a speed of 350 m/s lodges in a wood block of mass 50kg with a specific heat constant, cp of 2kJ/kg K. (a) Draw a sketch of the bullet and wooden block before impact and include an appropriate system boundary to allow the average temperature rise in the block to be found. (b) Write down the generalised version of the first law of thermodynamics for a system and identify the terms that are not relevant to the system identified in (a); hence find the average rise in temperature caused by the bullet lodging in the wooden block
The average rise in temperature caused by the bullet lodging in the wooden block is -260.90 °C.
Given information:
Mass of the bullet, m_bullet = 20 g = 0.02 kg
Velocity of the bullet, v_bullet = 350 m/s
Mass of the wooden block, m_block = 50 kg
Specific heat constant of the wood, cp = 2 kJ/kg K
Step 1: Calculate the kinetic-energy of the bullet before impact.
The kinetic energy (KE) of the bullet is given by the formula:
KE = (1/2) * m_bullet * v_bullet^2
Substituting the given values:
KE = (1/2) * 0.02 kg * (350 m/s)^2
KE = 1225 J
Step 2: Calculate the heat transfer (Q) to the wooden block.
Since the bullet lodges in the wooden block, all of its kinetic energy is transferred to the block. Therefore, the heat transfer (Q) is equal to the kinetic energy of the bullet.
Q = KE = 1225 J
Step 3: Calculate the average rise in temperature (ΔT) of the wooden block.
The heat transfer (Q) can be expressed as:
Q = m_block * cp * ΔT
Rearrange the equation to solve for ΔT:
ΔT = Q / (m_block * cp)
Substituting the given values:
ΔT = 1225 J / (50 kg * 2 kJ/kg K)
ΔT = 12.25 K
Step 4: Convert the temperature rise from Kelvin to Celsius (if necessary).
Since the question asks for the average rise in temperature, we can report the value in Celsius if desired.
ΔT_Celsius = ΔT - 273.15
ΔT_Celsius = 12.25 K - 273.15
ΔT_Celsius ≈ -260.90 °C
Therefore, the average rise in temperature caused by the bullet lodging in the wooden block is approximately -260.90 °C.
Learn more about temperature from the given link
https://brainly.com/question/26866637
#SPJ11
Unless othenvise stated, alf objocts are locatod near the Earth's surlace, where g=9.80 m/s
2
A loaded Booing 747 jumbo jet has a mass of 20×10
5
kg What net force is required to give the plane an acceleration of 3.0 m/s
2
down the nunasy for takeolfs? Express your answer using two significant flgures.
A Boeing 747 jumbo jet has a mass of 20 x 105 kg.
The question asks what net force is required to give the plane an acceleration of 3.0 m/s² down the runway for takeoffs?First, we should calculate the force required to give the airplane an acceleration of 3.0 m/s².
This can be found using the following formula:F = m x aWhere F = force, m = mass and a = acceleration.Substituting the values given in the question:[tex]F = (20 x 105) kg x 3.0 m/s²F = 6.0 x 105 N[/tex]Now we have the force required to give the airplane an acceleration of 3.0 m/s².
This is not the net force required, since there are other forces acting on the plane when it is taking off.
The net force required to give the plane an acceleration of 3.0 m/s² can be found using Newton's second law of motion, which states:F_net = maWhere F_net = net force, m = mass and a = accelerationSubstituting the values given in the question:[tex]F_net = (20 x 105) kg x (9.8 + 3.0) m/s²F_net = 4.5 x 106 N[/tex]
The net force required to give the plane an acceleration of 3.0 m/s² down the runway for takeoffs is 4.5 x 106 N.
To know more about jumbo visit:
https://brainly.com/question/30766050
#SPJ11
in 2018, the James Webb Space Telescope is scheduled to launch. Which option is one of its new capabilities?
A. Being able to analyze the rocky terrains of new alien planets.
B. Being able to land on certain planets to retrieve samples.
C. Being able to investigate the atmospheres of alien planets and determine their molecular composition.
D. All options are correct.
C. Being able to investigate the atmospheres of alien planets and determine their molecular composition .The James Webb Space Telescope (JWST) is an advanced space observatory developed by NASA
The James Webb Space Telescope (JWST) is an advanced space observatory developed by NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). It was originally scheduled to launch in 2018 (though it actually launched on December 25, 2021), and it offers several new capabilities compared to previous space telescopes.
One of the key capabilities of the James Webb Space Telescope is its ability to investigate the atmospheres of alien planets and determine their molecular composition. By observing the light passing through the atmospheres of exoplanets, the telescope can analyze the different molecules present and provide valuable information about these distant worlds.
Options A and B are not accurate. The James Webb Space Telescope is an observatory located in space and is not designed to analyze rocky terrains or land on planets to retrieve samples. Therefore, the correct option is C: Being able to investigate the atmospheres of alien planets and determine their molecular composition.
To learn more about The James Webb Space Telescope follow:
https://brainly.com/question/8962979
#SPJ11
A layer of oil (n = 1.45) floats on a tank of water (n=1.33). Underneath the water is heavy glass (n=1.7), Finally there is air (n = 1.00) above the oil and below the glass. A light ray makes an angle of 35 degrees (incident) as it enters this sandwich. What angle does it make with the glass as it exits the sandwich? (Please show work and drawing)
The light ray entering the sandwich at an angle of 35 degrees exits the sandwich making an angle of approximately 28.67 degrees with the glass. This is determined by applying Snell's law and considering the refractive indices of water, oil, and glass.
To determine the angle at which the light ray exits the sandwich, we can apply Snell's law, which states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the refractive indices of the two media involved.
Since the light ray travels from water to oil, the angle of incidence in water is 35 degrees. We can calculate the angle of refraction in oil using Snell's law:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Here, n₁ is the refractive index of water (1.33), θ₁ is the angle of incidence in water (35 degrees), n₂ is the refractive index of oil (1.45), and θ₂ is the angle of refraction in oil.
Plugging in the values, we get:
1.33 * sin(35°) = 1.45 * sin(θ₂)
Solving for θ₂, we find:
θ₂ ≈ 32.85 degrees
Now, to find the angle with the glass as it exits the sandwich, we can again apply Snell's law, this time considering the transition from oil to glass. Using similar calculations, we find that the angle of refraction in glass is approximately 28.67 degrees.
Therefore, the angle the light ray makes with the glass as it exits the sandwich is approximately 28.67 degrees.
To know more about Snell's law,
https://brainly.com/question/31432930
#SPJ11
What is the charge per unit area in C/m2, of an infinite plane sheet of charge if the electric field produced by the sheet of charge has magnitude 3.0 N/C?
The charge per unit area of the infinite plane sheet of charge is approximately 26.55 x 10⁻¹² C/m².
The charge per unit area of an infinite plane sheet of charge can be determined using the formula:
σ = ε₀× E
where σ is the charge per unit area (in C/m²),
ε₀ is the vacuum permittivity (ε₀ = 8.85 x 10⁻¹²) C²/(N·m²)),
and E is the magnitude of the electric field (in N/C).
In this case, we are given that the electric field produced by the sheet of charge has a magnitude of 3.0 N/C.
Substitute this value into the formula to find the charge per unit area:
σ = ε₀ × E
σ = (8.85 x 10⁻¹² C²/(N·m²)) × 3.0 N/C
Performing the calculation:
σ = 8.85 x 10⁻¹² C²/(N·m²) × 3.0 N/C
σ = 26.55 x 10⁻¹² C/(N·m²)
Learn more about charge -
brainly.com/question/2373424
#SPJ11
16. a) A person walks north 125 m then south 48 m and finally east 35 m. If the whole trip takes 65 seconds find the speed and velocity of the person. b) an object at rest and accelerates iniformly at 38.5 m/s in 4.8 seconds. Find acceleration of the object, AND distance travelled in 4.8 seconds.
a) The speed and velocity of the person is 3.20 m/s and 0.54 m/s east respectively. Speed is the total distance divided by the total time, while velocity is the displacement divided by the total time.
b) The acceleration of the object is approximately 8.02 m/s², and the distance traveled in 4.8 seconds is approximately 92.1 m. . The distance traveled can be determined using the equation that relates distance, initial velocity, acceleration, and time.
a) To find the speed and velocity of a person who walks in different directions, we need to calculate the total distance traveled and the displacement. The total distance traveled by the person is the sum of the distances in each direction: 125 m + 48 m + 35 m = 208 m. The total displacement is the final position minus the initial position, which is 35 m east. The total time taken is 65 seconds. Therefore, the speed is 208 m / 65 s ≈ 3.20 m/s, and the velocity is 35 m east / 65 s ≈ 0.54 m/s east.
b) The acceleration of the object can be calculated by dividing the change in velocity by the time taken: acceleration = (final velocity - initial velocity) / time = (38.5 m/s - 0 m/s) / 4.8 s ≈ 8.02 m/s². The distance traveled by the object can be determined using the equation: distance = (initial velocity × time) + (0.5 × acceleration × time²) = (0 m/s × 4.8 s) + (0.5 × 8.02 m/s² × (4.8 s)²) ≈ 92.1 m.
Therefore, the acceleration of the object is approximately 8.02 m/s², and the distance traveled in 4.8 seconds is approximately 92.1 m.
Learn more about displacement here:
brainly.com/question/11934397
#SPJ11
A 0.270-kg block resting on a frictionless, horizontal surface is attached to a spring whose force constant is 83.8 N/m as in the figure below. A horizontal force F vector causes the spring to stretch a distance of 4.44 cm from its equilibrium position. Find the magnitude of F vector. What is the total energy stored in the system when the spring is stretched? Find the magnitude of the acceleration of the block immediately after the applied force is removed. Find the speed of the block when it first reaches the equilibrium position. If the surface is not frictionless but the block still reaches the equilibrium position, would your answer to part (d) be larger or smaller? larger smaller There is not enough information to answer. What other information would you need to know to find the actual answer to part (d) in this case? What is the largest value of the coefficient of friction that would allow the block to reach the equilibrium position?
The magnitude of the force F vector is approximately 3.72 N, the displacement of the spring is 0.0444m and potential energy stored is 0.0416 J. The magnitude of the acceleration of the block immediately after the applied force is removed is approximately 8.06 m/s^2.
To find the magnitude of the force F vector, we can use Hooke's Law, which states that the force exerted by a spring is proportional to the displacement from its equilibrium position.
F = -kx
Where F is the force exerted by the spring, k is the force constant of the spring, and x is the displacement from the equilibrium position.
Mass of the block (m) = 0.270 kg
Force constant of the spring (k) = 83.8 N/m
Displacement of the spring (x) = 4.44 cm = 0.0444 m
Using Hooke's Law, we can calculate the magnitude of the force F vector:
F = -kx
F = -83.8 N/m * 0.0444 m
F ≈ -3.72 N
The magnitude of the force F vector is approximately 3.72 N.
To find the total energy stored in the system when the spring is stretched, we can use the formula for potential energy stored in a spring:
Potential Energy = (1/2) kx^2
Potential Energy = (1/2) * 83.8 N/m * (0.0444 m)^2
Potential Energy ≈ 0.0416 J
The total energy stored in the system when the spring is stretched is approximately 0.0416 Joules.
When the applied force is removed, the block will undergo simple harmonic motion. The magnitude of the acceleration of the block at any point during simple harmonic motion can be given by:
a = ω^2 * x
Where ω is the angular frequency of the motion and can be calculated using ω = sqrt(k/m).
Force constant of the spring (k) = 83.8 N/m
Mass of the block (m) = 0.270 kg
ω = sqrt(83.8 N/m / 0.270 kg)
ω ≈ 14.28 rad/s
Now, we can calculate the magnitude of the acceleration of the block immediately after the applied force is removed:
a = ω^2 * x
a = (14.28 rad/s)^2 * 0.0444 m
a ≈ 8.06 m/s^2
To know more about spring constant, click here:-
https://brainly.com/question/29975736
#SPJ11
Mass =1/2M⊕
Radius = ? R⊕
Gravity =2 F⊕
8× Earth's
1× Earth's
1/2 × Earth's
1/4× Earth's
Given the mass of an object as half of the mass of Earth (1/2M⊕), and the gravitational force as 2 times the force on Earth (2F⊕), the radius of the object (R⊕) needs to be determined.
The gravitational force acting on an object depends on its mass and the distance from the center of the attracting body. In this case, the object's mass is given as half of the mass of Earth (1/2M⊕), and the gravitational force is given as 2 times the force on Earth (2F⊕). To determine the radius of the object (R⊕), we can use the formula for gravitational force:
F = G * (m1 * m2) / r^2
where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between their centers.
Given that the gravitational force is 2F⊕ and the mass of the object is 1/2M⊕, we can rewrite the formula as:
2F⊕ = G * ((1/2M⊕) * M⊕) / R⊕^2
Simplifying, we can cancel out M⊕ and rearrange the equation to solve for R⊕:
R⊕^2 = G * (1/4)
Taking the square root of both sides, we find:
R⊕ = √(G * (1/4))
Therefore, the radius of the object can be determined using the value of the gravitational constant (G).
Learn more about gravitational force here:
https://brainly.com/question/32609171
#SPJ11
A jogger runs with a speed of 3.30 m/sm/s in a direction 30.0∘ above the x axis.
A.)Find the x and y components of the jogger's velocity.
B.)Calculate the components of the velocity for the case where the speed of the jogger in part A is halved?
A) The x and y components of the jogger's velocity are approximately 2.86 m/s and 1.65 m/s, respectively.
B) When the speed is halved, the new x and y components of the jogger's velocity are approximately 1.43 m/s and 0.825 m/s, respectively.
To find the x and y components of the jogger's velocity, we can use trigonometry. Let's assume the x-axis is the horizontal axis and the y-axis is the vertical axis.A) Finding the x and y components of the jogger's velocity:
Given:
Speed (v) = 3.30 m/s
Angle (θ) = 30.0 degrees
To find the x-component (Vx) and y-component (Vy) of the velocity, we can use the following formulas:
Vx = v * cos(θ)
Vy = v * sin(θ)
Plugging in the values:
Vx = 3.30 m/s * cos(30.0°)
Vx = 3.30 m/s * √(3)/2
Vx ≈ 3.30 m/s * 0.866
Vx ≈ 2.86 m/s (rounded to two decimal places)
Vy = 3.30 m/s * sin(30.0°)
Vy = 3.30 m/s * 1/2
Vy = 1.65 m/s
Therefore, the x-component of the jogger's velocity is approximately 2.86 m/s, and the y-component is 1.65 m/s.
B) Finding the components of the velocity when the speed is halved:If we halve the speed, the new speed (v') would be half of the original speed:
v' = 3.30 m/s / 2
v' = 1.65 m/s
To find the new x-component (Vx') and y-component (Vy') of the velocity, we can use the same formulas as before:
Vx' = v' * cos(θ)
Vy' = v' * sin(θ)
Plugging in the values:
Vx' = 1.65 m/s * cos(30.0°)
Vx' = 1.65 m/s * √(3)/2
Vx' ≈ 1.65 m/s * 0.866
Vx' ≈ 1.43 m/s (rounded to two decimal places)
Vy' = 1.65 m/s * sin(30.0°)
Vy' = 1.65 m/s * 1/2
Vy' = 0.825 m/s
Therefore, when the speed is halved, the new x-component of the jogger's velocity is approximately 1.43 m/s, and the new y-component is 0.825 m/s.
Learn more about velocity
brainly.com/question/18084516
#SPJ11
A Particle in a Magnetic Field When moving in a magnetic field, some particles may experience a magnetic force. Without going into details - a detailed study of magnetic phenomena comes in later chapters-let's acknowledge that the magnetic field
B
is a vector, the magnetic force
F
is a vector, and the velocity
u
of the particle is a vector. The magnetic force vector is proportional to the vector product of the velocity vector with the magnetic field vector, which we express as
F
=ζ
u
×
B
. In this equation, a constant ζ takes care of the consistency in physical units, so we can omit physical units on vectors
u
and
B
. In this example, let's assume the constant ζ is positive. A particle moving in space with velocity vector
u
=−5.0
i
^
−2.0
j
^
+3.5
k
^
enters a region with a magnetic field and experiences a magnetic force. Find the magnetic force
F
on this particle at the entry point to the region where the magnetic field vector is (a)
B
=7.2
i
^
−
j
^
−2.4
k
^
and (b)
B
=4.5
k
^
. In each case, find magnitude F of the magnetic force and angle θ the force vector
F
makes with the given magnetic field vector
B
.
The velocity vector is u = −5.0 i^−2.0 j^+3.5 k^The magnetic field vector B in the first case is B = 7.2 i^−j^−2.4 k^The magnetic field vector B in the second case is B = 4.5 k^The magnetic force is given as F = ζ u × BHere, ζ is positive. Thus, we need to find the magnetic force and the angle between the force and the magnetic field vector for the given values of B.
(a) Magnetic field vector B = 7.2 i^−j^−2.4 k^Magnetic force F = ζ u × BMagnetic force F = ζ | u | | B | sin θ nWe have ζ as a constant of proportionality, so the magnetic force F is directly proportional to the magnitude of the velocity vector u and the magnetic field vector B and is given byF = K | u | | B | sin θ (where K is a constant of proportionality) The magnitude of the velocity vector u = √(−5.0² − 2.0² + 3.5²) = √34.25The magnitude of the magnetic field vector B = √(7.2² + 1² + (−2.4)²) = √59.76Therefore, the magnitude of the magnetic force isF = K | u | | B | sin θNow, we know that sin θ = | u × B | / | u | | B |Therefore,F = K | u | | B | (| u × B | / | u | | B |)⇒ F = K | u × B |This implies that F is the magnitude of the vector product of the velocity and magnetic field vectors F = ζ | u × B |And the angle θ between the force vector and the magnetic field vector is sin θ = | u × B | / | u | | B |⇒ θ = sin−1 (| u × B | / | u | | B |)Putting the values in the above expressions, we get:
F = ζ | −5.0(−2.4) − 3.5(−1) | = ζ (11.7)The magnetic force at the entry point to the region where the magnetic field vector is B is 11.7ζ N.We need to find the angle θ made by the force vector F with the magnetic field vector B.We have,F = ζ | −5.0(−2.4) − 3.5(−1) | = ζ (11.7)Now,| u | = √(−5.0² − 2.0² + 3.5²) = √34.25, | B | = √(7.2² + 1² + (−2.4)²) = √59.76 and| u × B | = √[−5.0²(−2.4)² − 3.5²(−2.4)² + 3.5²(−1)²] = √46.49sin θ = | u × B | / | u | | B | = √46.49 / (34.25 59.76)⇒ θ = sin−1 (sin θ) = sin−1(√46.49 / (34.25 59.76)) = 34.4°(approx)
(b) Magnetic field vector B = 4.5 k^Magnitude of the velocity vector u = √(−5.0² − 2.0² + 3.5²) = √34.25Magnitude of the magnetic field vector B = √(0² + 0² + 4.5²) = 4.5Therefore, the magnitude of the magnetic force is F = ζ | u | | B | sin θF = ζ | u × B |And the angle θ between the force vector and the magnetic field vector is sin θ = | u × B | / | u | | B |⇒ θ = sin−1 (| u × B | / | u | | B |)We have,F = ζ | −5.0(0) − 2.0(0) + 3.5(4.5) | = ζ (15.75) = 15.75ζ NAs | u × B | = | −5.0(0) − 2.0(0) + 3.5(4.5) | = 15.75, we have the magnetic force as 15.75ζ N.The angle θ made by the force vector F with the magnetic field vector B issin θ = | u × B | / | u | | B | = √46.49 / (34.25 4.5)⇒ θ = sin−1 (sin θ) = sin−1(√46.49 / (34.25 4.5)) = 50.4°(approx).
Hence the magnetic force and the angle between the force and the magnetic field vector for the given values of B are Magnetic force and the angle between the force and the magnetic field vector for :
(a) are 11.7ζ N and 34.4°(approx).Magnetic force and the angle between the force and the magnetic field vector for (b) are 15.75ζ N and 50.4°(approx).About Magnetic fieldThe magnetic field in physics, is a field formed by moving electric charges which causes a force to appear on other moving electric charges. A magnetic field is a vector field: that is associated with every point in a vector space that can change with time. The strength of the magnetic force comes from the interaction between the magnetic poles caused by the movement of electric charges (electrons) on objects.
Learn More About Magnetic field at https://brainly.com/question/14411049
#SPJ11
(8%) Problem 14: A jet traveling at Mach 2.5 flies at an altitude of 8.0 km. The jet passes directly over an observer standing on the ground (call this t = 0) and then at some later time t, the observer hears a sonic boom. The average speed of sound in air, over the path of the sound, is 334 m 50% Part (a) How long, in seconds, after the jet passes directly over the observer does she hear the boom? t = S ▷ A 50% Part (b) What horizontal distance (measured from the location of the observer) does the jet travel before the shock wave reaches the observer? Express in kilometers. X = km Grade Summary Deductions
To solve this problem, we can first calculate the time it takes for the sonic boom to reach the observer, and then determine the horizontal distance traveled by the jet before the shock wave reaches the observer.
a) To find the time it takes for the sonic boom to reach the observer, we need to consider the speed of sound and the altitude of the jet. The average speed of sound in air is given as 334 m/s. The altitude of the jet is 8.0 km, which is equivalent to 8,000 meters.
Using the formula for time, which is distance divided by velocity, we can calculate the time:
t = distance / velocity
t = 8,000 m / 334 m/s
t ≈ 23.95 seconds
Therefore, the observer will hear the sonic boom approximately 23.95 seconds after the jet passes directly over them.
b) To determine the horizontal distance traveled by the jet before the shock wave reaches the observer, we need to consider the speed of sound and the time it takes for the sonic boom to reach the observer.
The speed of sound remains constant at 334 m/s, and we have already calculated the time as 23.95 seconds. Therefore, we can find the horizontal distance using the formula:
distance = velocity × time
distance = 334 m/s × 23.95 s
distance ≈ 7,996.3 meters
Converting meters to kilometers:
distance ≈ 7.9963 kilometers
Therefore, the jet travels approximately 7.9963 kilometers horizontally from the location of the observer before the shock wave reaches them.
To learn more about sonic boom, Click here:
https://brainly.com/question/31609435
#SPJ11
1. E Boiling and condensation At the critical maximum nucleate boiling heat flux, the heating element may experiences a sudden temperature jump. 2. In Film Boiling the presence of a vapor film between the heater surface and the liquid is responsible for the low heat transfer rates in the film boiling region. 3. Condensation releases latent heat, which acts to cool the air. 4. The excess temperature, used in pool boiling problem is equal to Ts-Too. Answer with True or False
The first two statements are true. The last two statements are false.
1. At the critical maximum nucleate boiling heat flux, a sudden temperature jump can occur in a heating element. This phenomenon happens when the heat flux is at its maximum and the liquid near the heating surface transitions to a highly active boiling state. The sudden temperature jump is caused by the intense vapor generation and rapid heat transfer processes occurring at the surface.
2. Film boiling is a stage of boiling where a vapor film forms between the heater surface and the liquid. This vapor film acts as an insulating layer, leading to low heat transfer rates in the film boiling region. The vapor film reduces the contact between the heater surface and the liquid, hindering efficient heat transfer and resulting in lower overall heat transfer rates compared to other boiling regimes.
3. Condensation is the process in which a vapor or gas transforms into a liquid state. When condensation occurs, latent heat is released. However, contrary to the statement, the release of latent heat actually acts to heat the surroundings, not cool the air. This is because latent heat represents the energy released during the phase transition from gas to liquid, and it is transferred to the surrounding environment.
4. In pool boiling problems, the excess temperature is not equal to Ts - Too as stated. Instead, it is calculated as Ts - Tsub. Ts represents the surface temperature, and Tsub represents the saturation temperature of the liquid. The excess temperature is the temperature difference between the surface and the saturation temperature, which is used to characterize the heat transfer performance in pool boiling experiments or analyses.
Learn more about Condensation
https://brainly.com/question/30629848
#SPJ11
What capacitance is needed in a series with an 800-µH inductor
to form a circuit that radiates a wavelength of 300 m?
_______ pF
The capacitance needed in a series with an 800-µH inductor to form a circuit that radiates a wavelength of 300 m is approximately 17.74 pF.
The formula to calculate the capacitance needed for resonance in a series LC circuit is:
Capacitance = 1 / (4π² × Inductance × (Frequency)²).
First, we need to calculate the frequency using the formula:
Frequency = Speed of Light / Wavelength.
Given that the wavelength is 300 m and the speed of light is approximately 3 × 10⁸ m/s, the frequency is 1 × 10⁶ Hz.
Plugging the values into the capacitance formula, we find:
Capacitance = 1 / (4π² × (800 × 10⁻⁶ H) × (1 × 10⁶ Hz)²) ≈ 17.74 pF.
To know more about capacitance, refer here:
https://brainly.com/question/31871398#
#SPJ11
SIA C RA 22 Frictionless,tib 01 massless pulley 48 In Fig. 6-31, blocks A and B have weights of 44 N and 30 N. respectively. (a) Determine the minimum weight of block C to ad keep A from sliding if μ, between A and the table is 0.20. (b) Block C suddenly is lifted off A. What is the acceleration of block A if μk between A and the table is 0.15? od of follets batootib bos bold ens hun ba B спап апи п (g) 0°, (h) 30.0°, and (i) 60.0°? Figure 6-31 Problem 48.
The minimum weight of block C to keep A from sliding is 38.8 N, and acceleration of block A is 0.15 m/s^2. The minimum weight of block C is the weight that will cause the static friction force between block A and the table to be equal to the weight of block A.
The static friction force is equal to the coefficient of static friction between the two surfaces multiplied by the normal force. In this case, the coefficient of static friction is 0.20, the normal force is 44 N, and the minimum weight of block C is 0.20 * 44 N = 8.8 N.
(b) The acceleration of block A after block C is lifted off is 0.15 m/s^2.
The acceleration of block A is equal to the force of friction divided by the mass of block A. The force of friction is equal to the coefficient of kinetic friction between the two surfaces multiplied by the normal force.
In this case, the coefficient of kinetic friction is 0.15, the normal force is 44 N, and the mass of block A is 44 N / 9.8 m/s^2 = 4.5 kg.
So, the acceleration of block A is 0.15 * 44 N / 4.5 kg = 0.15 m/s^2.
To know more about friction, click here:-
https://brainly.com/question/28356847
#SPJ11
a. A novelty clock has a 0.0100−kg-mass object bouncing on a spring that has a force constant of 1.3 N/m. What is the maximum velocity of the object if the object bounces 3.00 cm above and below its equilibrium position? v
max = m/s
b. How many joules of kinetic energy does the object have at its maximum velocity? KE
max =
A The maximum velocity of the object is 1.08 m/s, b The object has 0.00658 joules of kinetic energy at its maximum velocity.
a. To find the maximum velocity of the object, we can use the principle of conservation of mechanical energy.
At the maximum displacement of 3.00 cm above and below the equilibrium position, all the potential energy of the system is converted into kinetic energy.
The potential energy of the system is given by the formula:
PE = (1/2)kx^2
where k is the force constant of the spring and x is the displacement from the equilibrium position.
In this case, x = 3.00 cm = 0.03 m, and k = 1.3 N/m.
PE = [tex](1/2)(1.3 N/m)(0.03 m)^2[/tex]
= 0.000585 J
Since all the potential energy is converted into kinetic energy at the maximum displacement, the kinetic energy at the maximum velocity is equal to the potential energy:
[tex]KE_{max[/tex] = PE = 0.000585 J
b. The kinetic energy (KE) of an object is given by the formula:
KE = (1/2)[tex]mv^2[/tex]
where m is the mass of the object and v is its velocity.
In this case, m = 0.0100 kg (given) and we need to find v_max.
Using the principle of conservation of mechanical energy, we can equate the kinetic energy at the maximum velocity to the potential energy:
[tex]KE_{max[/tex] = PE = 0.000585 J
Substituting the values:
(1/2)(0.0100 kg)[tex]v_{max^2[/tex] = 0.000585 J
Simplifying the equation:
[tex]v_{max^2[/tex] = (2)(0.000585 J) / 0.0100 kg
[tex]v_{max^2[/tex] = 0.0117 J / 0.0100 kg
[tex]v_{max^2[/tex] = 1.17 [tex]m^2/s^2[/tex]
Taking the square root of both sides:
[tex]v_{max[/tex] = √(1.17 [tex]m^2/s^2[/tex])
[tex]v_{max[/tex] ≈ 1.08 m/s
The maximum velocity of the object is approximately 1.08 m/s.
b. The object's kinetic energy at its maximum velocity is given by:
[tex]KE_{max[/tex] = [tex](1/2)(0.0100 kg)(1.08 m/s)^2[/tex]
= (1/2)(0.0100 kg)(1.1664 [tex]m^2/s^2[/tex])
≈ 0.00658 J
The object has 0.00658 joules of kinetic energy at its maximum velocity.
To know more about maximum velocity refer here
https://brainly.com/question/30763982#
#SPJ11
What value of inductance should be used if a 19.6 {k} \Omega reactance is needed at a frequency of 523 {~Hz} ?
Reactance (X) is an opposition of an inductor to a change in the electrical current flowing through it.
An inductor's reactance is directly proportional to its inductance and frequency of operation.
The formula that relates the reactance (X),
frequency (f),
and inductance (L) of an inductor is:
X = 2πfL
where: X is in Ohms (Ω)f is in Hertz (Hz)L is in Henrys (H)
To calculate the value of inductance (L) required for a reactance (X) of 19.6 kΩ at a frequency (f) of 523 Hz, the formula above can be rearranged as:
L = X/2πf
Substituting the given values:
L = 19.6 kΩ / 2π(523 Hz)
L = 19.6 × 10³ / 2π(523)
Henry
L = 19.6 × 10³ / 3285.7
Henry
L = 5.97
Henry (approx.)
the value of inductance that should be used if a reactance of 19.6 kΩ is required at a frequency of 523 Hz is approximately 5.97 Henry.
To know more about opposition visit:
https://brainly.com/question/29134649
#SPJ11
A sateilite is orbiting the earth just above its surface. The centripetal force making the satellite follow a circular trajectory is ust its weight, so its centripetal zeceleration is about 9.81 m s
2
. (the icceleration due to gravity near the earth's surface). If the earth's radius W about 6360 km, how Rast must the satellite be mowinn?How long will it takie for the satelife to complete one trip around this earth? A satellite is orbiting the earth just above its surface. The centripetai force making the satellite follow a circular trajectory tis justits Weight, so its centripetal acceleration is about 981 m/s
2
(the acceleration due to fravity near the earth's surfacel if the earth's rodius is about 6360 km, how tast must the satelike be movins? How long wilit take for the sataliite to complete one trip around the earti??
The satellite must be moving at a speed of about 7,905.52 m/s and its height from the surface of the earth should be about 42,155.59 m. The time taken by the satellite to complete one trip around the earth is about 50.78 minutes.
Centripetal acceleration, a = 9.81 m/s²Radius of the earth, R = 6360 km = 6,360,000 m.
Let the distance of the satellite from the center of the earth be r.
Time taken by the satellite to complete one revolution around the earth is given by:T = 2πr/v Where v is the velocity of the satellite.
Now, we know that the centripetal force acting on a body moving in a circular path is given by:F = m × a Where m is the mass of the body.
Further, we know that the gravitational force acting on a body of mass m near the surface of the earth is given by:F = m × gWhere g is the acceleration due to gravity near the surface of the earth.
Substituting the value of F in the expression of centripetal force, we get:m × g = m × ar = R + h Where h is the height of the satellite above the surface of the earth.
Substituting the value of a and simplifying, we get:h = 42,155.59 m.
Time taken by the satellite to complete one revolution around the earth is given by:T = 2πr/v.
The velocity of the satellite can be calculated as follows:
From the above equation, we get:v = √(GM/R) Where G is the universal gravitational constant and M is the mass of the earth.
Substituting the values, we get:v = 7,905.52 m/s.
Now, the distance traveled by the satellite in one revolution is equal to the circumference of the circle with radius r, i.e.C = 2πr.
Substituting the values, we get:C = 4,01,070.41 m.
Time taken by the satellite to complete one revolution around the earth is given by:T = C/vSubstituting the values, we get:T = 50.78 minutes.
Therefore, the satellite must be moving at a speed of about 7,905.52 m/s and its height from the surface of the earth should be about 42,155.59 m. The time taken by the satellite to complete one trip around the earth is about 50.78 minutes.
Learn more about gravitational force here ;
https://brainly.com/question/32609171
#SPJ11
An electric motor on an airplane operates on 36 volts and draws a current of 10 amperes. a. What is the power consumption of the motor? b. How much energy does the motor use during a 1 hour flight? hour is 3600 seconds)
The power consumption of a. the motor is 360 watts. b. The motor uses 1.296 x 10⁶ joules of energy during a 1-hour flight.
a. The power consumption of an electrical device can be calculated using the formula P = V * I, where P is power, V is voltage, and I is current.
Substituting the given values, we have P = 36 volts * 10 amperes = 360 watts.
Therefore, the power consumption of the motor is 360 watts.
b. Energy can be calculated by multiplying power by time. In this case, the power consumption of the motor is 360 watts, and the flight duration is 1 hour, which is equivalent to 3600 seconds.
Therefore, the energy used by the motor during the flight is
E = P * t = 360 watts * 3600 seconds
= 1.296 x 10⁶ joules.
Thus, the motor consumes 360 watts of power and uses 1.296 x 10⁶ joules of energy during a 1-hour flight.
To know more about power consumption, refer here:
https://brainly.com/question/30122759#
#SPJ11
A toy car (on a flat surface, frictionless surface) has initial kinetic energy KE and initial momentum p. A constant net force of F is applied to it. Find the velocity of the car at time t.
a). A car with mass, has a constant momentum of p. If m = 10kg and p = 10, find the displacement of the car at t = 10s.
To find the velocity of a toy car that has an initial kinetic energy, KE, and initial momentum, p, with a constant net force F applied to it at time t, the formula for Newton's Second Law of Motion will be used: force = mass x acceleration.
The force can be determined from the change in kinetic energy and change in momentum, respectively as:
force × time = ΔKE
ΔKE = 1/2 mv² - 1/2 mv₀²
force × time = Δp
Δp = mv - mv₀
from the two equations above, you can solve for velocity as:
fv = (Δp/m) + v₀
fv = (force × time / m) + v₀
Substituting the values of the variables in the formula:
v = (F × t / m) + v₀
v = ((F/10) × 2) + 0.5
v = (F/5) + 0.5
The formula for the velocity of the car at time t, with a constant net force F applied to it is:
v = (F/5) + 0.5
Part 2 : The displacement formula that is related to constant momentum is:
s = (p/m)t
where s = displacement,
p = momentum,
m = mass, and
t = time
If the mass of the car, m is 10kg, and its constant momentum is 10, then the displacement of the car at t = 10s is:
s = (10/10) × 10
s = 10 meters
Therefore, the displacement of the car at t = 10s is 10 meters.
To know more about energy visit:
https://brainly.com/question/8630757
#SPJ11
The radius of curvature of a spherical concave mirror is 15 cm. Describe the image formed when a 20 mm tall object is positioned a) 5 cm from the mirror, b) 20 cm from the mirror. For each case give the image distance, the image height, the type of image (real or virtual), and the orientation of the image (upright or inverted). Express your answer with the appropriate units.
(a) When the object is placed 5 cm from the concave mirror, the object distance (u) is -5 cm (-0.05 m). Using the mirror formula 1/f = 1/v + 1/u, where f is the focal length of the mirror, we can calculate the image distance (v). With a focal length of 15 cm (0.15 m), the equation becomes 1/0.15 = 1/v + 1/-0.05. Solving this equation, we find 1/v = 6.67 - (-20), resulting in 1/v = 26.67.
Thus, v is approximately 0.0375 m (3.75 cm). The magnification (m) is given by -v/u, which is -3.75/(-0.05) = 150 mm (15 cm). The image is real and inverted.
(b) When the object is placed 20 cm from the concave mirror, the object distance (u) is -20 cm (-0.2 m). Applying the mirror formula, 1/f = 1/v + 1/u, with a focal length (f) of 15 cm (0.15 m), we obtain 1/0.15 = 1/v + 1/-0.2. Solving this equation, we find 1/v = 6.67 - (-5), resulting in 1/v = 11.67. Hence, v is approximately 0.0856 m (8.56 cm). The magnification (m) is -v/u, which is -8.56/-0.2 = 0.856 m (85.6 cm). The image is real and inverted.
In summary, when the object is placed 5 cm from the concave mirror, the image is real, inverted, located at approximately 3.75 cm from the mirror, and has a magnification of 15 cm. When the object is placed 20 cm from the mirror, the image is also real, inverted, located at around 8.56 cm from the mirror, and has a magnification of 85.6 cm.
To Learn more about concave Click this!
brainly.com/question/14093215
#SPJ11