A solution with a ph of 6 has ________ times as many hydrogen ions as a solution with a ph of 8.

x2=x+2 at x=−1 and x=2 so we have no need to worry about the end-points

f(x)=x+2−x^2

df/dx=1–2x

and that is zero (indicating a maximum) at x=1/2

So the maximum distance is f(1/2)=2.5–0.25=2.25

learn more about maximum distance between curves here:

https://brainly.com/question/1603866

#SPJ4

The enol carbon or ∝-carbon  nucleophile attacks at molecular bromine in the acid-catalyzed α-bromination of a ketone

Treatment of ketones with bromine in the presence of acid will results in formation of a new C-Br bond at the alpha position. The purpose of the acid  is to catalysed formation of the enol from ketone , which is active nucleophile in the reaction. This reaction is called haloform reaction which is used to identify the methyl substituted ketone in the presence of aldehyde.

learn more about ketone

https://brainly.com/question/4439718

#SPJ4

The pH of a buffer solution containing acid of pKa 7.5 will be 8.1.

The pH of a solution indicates its acidity or basicity. A pH below 7 is acidic, while pH above 7 is basic. 7 is considered as the neutral value.

A buffer is a solution that has the ability to resist the change in pH when an acid or a base is added to it. The natural example of buffer is blood.

According to the question, pKa of acid = 7.5

If concentration of base is x then, concentration of acid will be x/4.

According to the Henderson–Hasselbalch equation,

pH = pKa + log [A⁻] / [HA]

pH = 7.5 + log [[tex]\frac{x}{x/4}[/tex]]

pH = 7.5 + log 4 ⇒ 7.5 + 0.602

pH = 8.1

To know more about buffer, here

brainly.com/question/22821585

#SPJ4

It is necessary to add zncl 2 to promote the reaction of hcl with some alcohols as this reaction is reversible to make it irreversible ZnCl2 is used.

ZnCl2 is used as Lewis acid catalyst. Since Cl- is weaker nucleophile than Br. The lewis acid ZnCl2 coordinate with oxygen of alcohol and proceed the reaction in forward direction.

HCl is less reactive with alcohols whereas the bond between H and Cl is stronger than HBr and HI.

Hence its reaction with alcohols need a catalyst ZnCl2, which helps in the breaking of bond between H and Cl.

Therefore, Luca's reagent is used in the reaction of HCl and alcohol.

learn more about lucas reagent:

https://brainly.com/question/14291045

#SPJ4

At equilibrium the concentrations of:

[HSO₄⁻] = 0.10 M;

[SO₄²⁻] = 0.037 M;

[H⁺] = 0.037 M;

There is initially very little H+ and no SO₄²⁻ in the solution. A salt is KHSO₄⁻. All KHSO₄⁻ will split apart into K⁺ and HSO₄⁻ ions. [HSO₄⁻] will initially be present at a concentration of 0.14 M.

HSO₄⁻ will not gain H⁺ to produce H₂SO₄ since H₂SO₄ is a strong acid.  HSO₄⁻ may act as an acid and lose H⁺ to form SO₄²⁻. Let the final H⁺ concentration be x M. Construct a RICE table for the dissociation of HSO₄²⁻.

R   [tex]HSO_4^-[/tex]    ⇄  [tex]H^+ + SO_4^2^-[/tex]

I    [tex]0.14[/tex]

C   [tex]- x[/tex]               [tex]+x[/tex]       [tex]+x[/tex]

E   [tex]0.14-x[/tex]        [tex]x[/tex]         [tex]x[/tex]

[tex]K_a = 1.3[/tex] × [tex]10^-^2[/tex] for [tex]HSO^-_4[/tex] . As a result,

[tex]\frac{[H^+]. [SO_4^2^-]}{HSO_4^-} = K_a[/tex]

[tex]K_a[/tex] is large. It is no longer valid to approximate that [tex][HSO^-_4][/tex] at equilibrium is the same as its initial value.

[tex]\frac{x^2}{0.14-y} = 1.3 * 10^-^2[/tex]

[tex]x^2+1.3*10^-^2x - 0.14[/tex] × [tex]1.3[/tex] × [tex]10^-^2= 0[/tex]

Solving the quadratic equation for [tex]x , x \geq 0[/tex] since [tex]x[/tex] represents a concentration;

                             [tex]x=0.0366538[/tex]

Then, round the results to 2 significant figure;

Learn more about concentration here:

https://brainly.com/question/14469428

#SPJ4

n oxidative phosphorylation, ATP production is coupled to the events in the electron-transport chain

The answer is A.

We know the formula for molarity :

Molarity = Number of moles ÷ Volume

Let's assume there are 0.6 moles of NaCl in 1 liter of ocean water.

Then, mass of salt is :

27.94 g/mole is the molar mass of the unknown gas.

Use Graham's Law, which indicates that the square root of a gas's molar mass determines its rate of effusion.

The following equation compares two distinct gases, (a) and (b), and expresses this:

sqrt(M(b)/M) = R(a)/R(b) (a)

R is the effusion rate.

square root = sqrt

the molar mass, M

In response to your query, if gas (a) is the unknown gas and Xe(M = 131 g/mol) is the second gas, we have:

sqrt(M(Xe)/M(a) = 2.165, where R(a)/R(Xe)

Square both sides, and you get:

(2.165)² = 131 g/mol/ M (a)

M(a)(2.165)² = 131

M(a) is equal to 131/(2.165)² = 27.94 g/mol.

Having a molar mass of 27.94 g/mol, the unknown gas.

Learn more about Graham's law of effusion here https://brainly.com/question/22359712

#SPJ4

Fluids used for an intravenous fluid transfusion must be isosmotic with bodily fluids.

Intravenous fluids, sometimes abbreviated as "IV fluids," are liquids that are administered to replace water, sugar, and salt that you may need if you're ill or having surgery and are unable to eat or drink regularly. Through a drip, Intravenous fluids are administered directly into a vein.

In order to treat or prevent dehydration, Intravenous fluids are carefully prepared liquids that are injected into a vein. They are applied to patients of all ages who are ill, hurt, becoming dehydrated from physical activity or the heat, or who are having surgery. Rehydrating intravenously is a straightforward, risk-free treatment that is frequently used.

To learn more about Intravenous Fluids please visit -
https://brainly.com/question/2869075
#SPJ4

The  Cm of the Microsand concentration in the tanks when expressed in grams of Microsand per liter (g/L) is known to be 3.8 g/L.

This is known to be a kind of  aggregate, that is said to be exempted from clay and shale and it is one that can rightly fine to pass via a No. 100 (that is 150 µm) sieve.

Note that from the question:

The Average of six samples = 30mg/L.

Then one need to Multiply:

30 by 300gpm x 1 Train x 1700 ( this is the use of the bulk density conversion factor).

Then one need to also Divide by (4000 gpm x 2000 mL) =  1.8 g/L.

Lastly you then multiply by 2,

1.8 g/L x 2  = 3.8 g/L.

Therefore, looking at the solution above, the Cm of the Microsand concentration in the tanks  is seen to be 3.8 g/L.

Learn more about flocculation from

https://brainly.com/question/15057637

#SPJ1

Nitrogen (N2) and hydrogen (H2) gases react to form ammonia, which requires -99.4 J/K of standard entropy (ΔS°).

What is standard entropy?

The difference between the total standard entropies of the reaction mixture and the summation of the standard entropies of the outputs is the standard entropy change. Each entropy in the balanced equation needs to be compounded by its coefficient, as shown by the letter "n."

Calculation:

Balancing the given reaction following-

1/2 N₂(g) + 3/2 H₂ (g)→ NH₃ (g)

ΔS° = [1 mol x S° (NH₃)g] - [1/2 mol x S° (N₂)g] - [3/2 mol x S°(H₂)g]

Here S° = standard entropy of the system

Insert into the aforementioned equation all the typical entropy values found in the literature:

ΔS° = [1 mol x 192.45 J/mol.K] - [1/2 mol x 191.61 J/mol.K] - [3/2 mol x 130.684 J/mol.K]

⇒ΔS° = - 99.4 J/K

Therefore, the standard entropy, ΔS° is -99.4 J/K.

Learn more about standard entropy here:

https://brainly.com/question/14356933

#SPJ4

The molar mass of the acid if 28. 5 ml of the koh solution is required to neutralize the sample is 90.23g/mol.

Molarity = (moles of solute/volume of solution) × 1000

Given,

Molarity of KOH solution = 0.180 M

Volume of solution = 28.5 mL

0.180 = (moles of KOH/ 28.5) × 1000

Moles = (0.18× 28.5)/1000

= 0.00513 mol

HA + KOH ------- KA + H2O

1 moles of KOH reacts with 1 moles of HA.

So, 0.00513 moles of KOH react with 0.00513 moles of HA.

Number of moles= given mass/ Molar mass

Given,

Mass of HA = 0.462 g

Moles of HA = 0.00512 mol

0.00512 = 0.462/ Molar mass

Molar mass = 90.23 g/ mol.

Thus the molar mass of HA required to neutralize the 28.5 mL of KOH is 90.23g/mol.

learn more about molar mass or moles:

https://brainly.com/question/26416088

#SPJ4

The valence electrons are present in the lewis formula for the perchlorate ion will be 32.

The electrons in such an atom's outermost atomic shell known as the valence electrons may be those that orbit the nucleus. Core electrons are mostly in filled orbitals some of which are located closest to the nucleus.

The formula of perchlorate ion is [tex]ClO^{-} _{4}[/tex].

The valence electrons of Cl is 7 and the valence electrons of oxygen is 6 , one negative charge . By adding the total valence electron, it will be 32.

The valence electrons are present in the lewis formula for the perchlorate ion will be 32.

Hence, the correct answer will be option (e).

To know more about valence electrons

https://brainly.com/question/13993867?

#SPJ4

Epimerization and Enediol rearrangement are the two most common unwanted side reactions which can occur when monosaccharides are treated with base.

Epimerization is a process in stereochemistry in which there is a change in the configuration of only one chiral centre. As a result, a diastereomer is formed. The classical example of this in medicine is tetracycline. In acidic conditions around pH 4, tetracycline readily undergoes epimerization at position 4, and an inactive 4-epitetracycline is produced, which on dehydration forms 4-epianhydrotetracycyline, a highly toxic product. This toxic compound can also be formed from acid catalysed (at lower pH) dehydration of tetracycline via anhydrotetracycline.

Enediol rearrangement is a  transformation which occurs at basic medium and allows the conversion of epimers, defined as isomeric forms that differ in the position of the hydroxyl group at C-2. In this way it is possible to transform through the enediol intermediate glucose to mannose and vice versa.

Another important isomerization process through the enediol rearrangement is the interconversion of glucose and fructose. Thus, the enolization proceeds by migration of proton at position 2, to carbon at 1.

Monosaccharides contain both alcohol and carbonyl functional groups. This allows monosaccharides to undergo many of the reactions typical for these functional groups. In particular, alcohols can be converted to esters, converted to ethers, converted to acetals, or oxidized. Carbonyls can be reacted with nucleophiles, be reduced to form alcohols, or be oxidized to form carboxylic acids.

To learn more about Epimerization : https://brainly.com/question/11381631
#SPJ4

The ph of the solution will be acidic. It is because of the higher ka value of ammonia as compared to kb of nitrate

As we know, A salt solution contains ammonium cation (ka = 5.7 × 10^–10) and nitrite anion (kb = 1.4 × 10^–11) in equal proportions but the ka and kb are different.

As we see that the value of ka is higher than the kb that's why the ph level will be acidic.

Acidic solutions are sour in taste as compared to alkaline solutions.

We know that the ph scale basically ranges from 0 to 14. The ph solutions less than 7 are acidic and greater than 7 are basic.

learn more about the acidic: https://brainly.com/question/940314

#SPJ4

Answer:

subscript

Explanation:

H₂ O   means there are two hydrogen atoms and one oxygen atom

               the ' ₂ '  is a subscript

option (B) KOH is the correct answer

KOH is the substance that, when added to the solution, is most likely to raise the pH .

To learn more about pH visit:

https://brainly.com/question/24276261

#SPJ4

Na -k pumps couple atp hydrolysis with the transport of Na and k.

Both ions are used for active transport.

d. K+ and Na+ both diffuse into the cell along their concentration gradients and drive the transport of glucose.

Na/K pump is a pump located on the plasma membrane which uses ATP to move 3 Na ions out the cell and brings in 2 K ions into the cell. It is an example of primary active transport. As a consequence, concentration of Na is higher outside the cell, while K concentration is higher inside the cell.

Glucose is transported in the cell against its gradient, together with Na ions (symport) which move down their concentration gradient.

This is an example of secondary active transport because it uses the energy from the primary active transport to move other substances such as glucose against their own gradients.

Learn more about atp hydrolysis :https://brainly.com/question/13056741

#SPJ4

Rusting of Iron is the formation of rust which is characterized by formation of layer of red colour. Formula of Rust is Ferric Oxide (Fe₂O₃) where iron exhibits oxidation state of +3.

Following are the indicators of rusting:

Even if the Reddish brown rust is not visible on the iron surface, then also Ferroxyl Indicator turns blue in presence of Iron ions.

Learn more about Rusting of Iron here, https://brainly.com/question/10843927

#SPJ4

A symmetrical acid anhydride will undergo a reaction with an alcohol to give an ester and a carboxylic acid. An asymmetrical acid anhydride will undergo a reaction with an alcohol to give two esters and two carboxylic acids.

Learn more about Acid anhydride and alcohol reaction here:

https://brainly.com/question/7260193

#SPJ4

In a solution, when the concentrations of a weak acid and its conjugate base are equal: 1. the -log of the concentration of H+ and the -log of the Ka are equal.

Any acid that entirely ionises in solutions is considered a strong acid. When positioned, it emits the most hydrogen ions or protons.

Acids that don't entirely dissociate in solution are referred to as weak acids. In other words, any acid that is not a strong acid qualifies as a weak acid. The amount of dissociation determines how strong an acid is; the more dissociation, the stronger the acid.

Learn more about Acids and bases here:

https://brainly.com/question/27915098

#SPJ4

The concentration of hydroxide ion of a solution with a pH of 8. 25 is 1.77×[tex]10^{6}[/tex] M

Calculation,

The pH of a solution tells us about concentration of the [tex]H^{+[/tex] ion ( proton ) in solution. However, if we know the value of pH , we can calculate pOH with the help of pH and from pOH we can find concentration of hydroxide ions in the solution.

pH + pOH = 14

8. 25 + pOH = 14

pOH = 14 - 8. 25 = 5.75

Since, pH = -㏒[ [tex]H^{+[/tex] ]

Similarly, pOH = -㏒[[tex]OH^{-[/tex] ]

If pOH = 5.75 , that means that -㏒[[tex]OH^{-[/tex] ]  = 5.75 ,which means that,

[[tex]OH^{-[/tex] ]  = [tex]10^{-5.75}[/tex] = 1.77×[tex]10^{6}[/tex].

So, we know that the concentration of the [tex]OH^{-[/tex] ions in the solution with pH of 8.25 is 1.77×[tex]10^{6}[/tex] Molar

to learn more about hydroxide ion

https://brainly.com/question/25883474

#SPJ4

Answer:

1 mole of H2SO4 contains 2 x 6.023 x 10²³ So, 0.1 mole of H2SO4 contains =2 x 6.023 x 10²³ x 0.1

= 1.2 x 10²³atoms of hydrogen

hello there !!

In the Question it's asked that total atoms present in 0.1 mol of H2So4.

so , in the question number of moles is given as 0.1 mole

=> n = 0.1 mole

and total atoms present are = ???

So , in H2So4 molecule there are two hydrogen atoms

=> H2So4 → 2 hydrogen atoms

one mole of H2So4 consist of ;

=> 2 × 6.022 × 10²³

1 mol = 6.022 × 10 ²³ atoms

Therefore, 0.1 mole of H2So4

=> 0.1 × 2 × 6.022 × 10²³ Atoms

=> 0.1 × 2 × 6.022 × 10²³ Atoms=> 12.004 × 10²² Atoms

Answer:

C. C-14 decays but C-12 stays the same after death.

Explanation:

C-12 is stable and won't change.  C-14 is slightly radioactive.  It decays over time to C12.  A living plant or animal has a fairly constant C14/C12 ratio during it's lifetime.  Sources of food have a fairly consistent C-14/C-12 ratio.  Once it dies, the C-14 is no longer replenished, so the ratio of C-14 to C-12 drops over time, giving paleontologists the ability to carbon-date the sample.  The less C-14, the older the sample.

A conjugate acid is given by the acid-base theory of Bronsted–Lowry. The conjugate acid of a weak base, trimethylamine is ((CH₃)₃NH⁺) trimethylammonium ion.

A conjugate acid is a compound that has been formed when a base accepts the hydrogen or the proton ion from an acid. It can also be said that a hydrogen ion is added to a base.

The conjugate acid differs from the base by the addition of one proton ion to it. The reaction of a weak base, trimethylamine can be shown as,

(CH₃)₃N(aq) + H₃O⁺(aq) ⇌ (CH₃)₃NH⁺(aq) + H₂O(l)

Here, the trimethylamine compound has accepted a proton from hydronium to produce a conjugate acid, trimethylammonium cation, (CH₃)₃NH⁺.

Therefore, trimethylammonium (CH₃)₃NH⁺ is the conjugate acid of trimethylamine.

Learn more about conjugate acid here:

https://brainly.com/question/12883745

#SPJ4

option (b) freezing water is the correct answer.

Freezing water is an example of an exothermic process.

We can observe that melting of an ice is an example of endothermic process whereas, freezing of water is considered to be an example for exothermic process.

Water releases heat when it solidifies, warming the area around it. As a result, freezing is an exothermic process.

In the above given options,

To learn more about exothermic process visit:

https://brainly.com/question/12321421

#SPJ4

Answer:

B.) Freezing water

Explanation:

I got it correct on founders edtell

Correct option is C

Latent heat of vaporization is the amount of heat required to bring about the phase transition from liquid to gaseous state, at its boiling point.

The substance is Propane :

10140000 J of heat is used to boil 28.47 kg at 298 K. Here, the important thing is, the liquid is changing to vapor and the temperature is not changing means it's a phase change. So, the formula used for this is:

                        q=m× Δ[tex]H_{vap}[/tex]

where, q is the heat energy, m is mass and  Δ[tex]H_{vapour}[/tex]  is the enthalpy of vaporization.

Let's rearrange the formula for  as:

Given mass of the liquid = 28.47kg

Heat required to boil the liquid = 10.14 ×[tex]10^{2} J[/tex]

Let's plug in the values: [tex]\frac{10.14*10^{2}J }{28.47Kg} =356164\frac{J}{Kg}[/tex]

Rounding off 356164 will turn into 356000 J[tex]Kg^{-1}[/tex]

Hence, the right choice is C. propane 356000 j[tex]Kg^{-1}[/tex]

What is latent heat ?

Latent heat, energy absorbed or released by a substance during a change in its physical state (phase) that occurs without changing its temperature.

Learn more about latent heat of vaporization :

brainly.com/question/24203857

#SPJ4

Answer: Everything can dissolve in water because water is considered a universal solvent

Explanation: Liquid water is cooler than solid salt and sugar, allowing them to dissolve easily.

According to the concept of solubility, as water is considered to be a universal solvent salt and sugar both are able to dissolve in water as water is a universal solvent.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.

Learn more about solubility,here:

https://brainly.com/question/29857840

#SPJ2

The volume in the final system that was initially enclosed in a 12.3 liter cylinder with a moveable piston at 300 K and 2.0 atm is 36.9L.

The volume of a given amount of gas can be calculated by using the combined gas law formula as follows;

P1V1/T1 = P2V2/T2

Where;

According to this question, 1.0 mole of a gas is enclosed in a 12.3 liter cylinder with a moveable piston at 300 K and 2.0 atm.

However, half of the gas is removed, leaving 0.50 mole in the cylinder and the system is warmed to 900 K. The volume in the final system can be calculated as follows:

2 × 12.3/300 = 2 × V2/900

0.082 = 2V2/900

73.8 = 2V2

V2 = 73.8 ÷ 2

V2 = 36.9L

Therefore, the volume in the final system that was initially enclosed in a 12.3 liter cylinder with a moveable piston at 300 K and 2.0 atm is 36.9L.

Learn more about volume at: https://brainly.com/question/12357202

#SPJ1

Answer:

Explanation:

it's 18.45, my sister just got the guestion right! hope it helps :)