Answer:
Explanation:
Formula
Voltage_p * Current_p = Voltage_s * Current_s
Comment
What the formula means is the voltage multiplied by the current in the primary = voltage multiplied by the current in the secondary.
Givens
Vp =100 v
Ip = 6 amps
Vs = x
Is = 0.75 amps
Solution
100 * 6 = 0.75* x
600 = 0.75 x Divide both sides by 0.75
600/0,75 = 0.75x/0.75
800v = x
What you have here is a step up transformer. It has a relatively small voltage (100 volts ) on the primary which the transformer changes to 800 volts in the secondary.
Answer
800 volts.
How do I create a run chart?
One of the simple ways to create a run chart is:
Open Microsoft Excel. You should see a blank worksheet with grid lines.Across the top row, (start with box A1), enter headings for the type of information you will enter into your run chart: Time Unit, Numerator, Denominator, Rate/Percentage. Enter in the time period and corresponding numerator and denominator data into the columns below your headingsSelect cell B2 (the border should light up blue)Type a forward slash: /Select cell C2 (it should light up green)Type a closed parenthesis: )Type a star (hold the SHIFT and 8 keys down at the same time): *Type the number 1000: 1000The whole equation should look like this: =(B2/C2)*1000Hit the “Enter” key. You will see a number with decimals appear in cell D2. Select the information you want to include in your run chart. This is usually the time unit and rate/percentage, which in this example, would be month and 30 day readmission rate.Click on the “Insert” tab, Select the “Line” graph option, then click on the “Line with Markers” boxA run chart should appear on the screen What is a Run Chart?This refers to the line chart that is plotted over time and displays observed data in a time sequence.
Hence, we can see that the simple tutorial on how to create a run chart with the use of an Excel Spreadsheet is given above.
Read more about run charts here:
https://brainly.com/question/24215818
#SPJ1
What pretakeoff check should be made of a vacuum-driven heading indicator in preparation for an ifr flight?
Answer:
After 5 minutes, set the indicator to the magnetic heading of the aircraft and check for proper alignment after taxi turns.
Explanation:
The pretakeoff check is that;
After 5 minutes, set the indicator to the magnetic heading of the aircraft and check for proper alignment after taxi turns.
Perform pre-flight checks on the vacuum-driven heading indicator, including the power source, zero setting, gyro drift, and accurate operation before an IFR flight.
We have,
Before a flight, especially for IFR (Instrument Flight Rules) operations, it's crucial to conduct a thorough pre-flight check of the vacuum-driven heading indicator, also known as the directional gyro or DG.
The heading indicator is a crucial instrument for maintaining proper heading during flight. Here are the key checks to perform:
- Power and Vacuum Source:
Ensure that the aircraft's vacuum system is functioning correctly and providing adequate suction to power the heading indicator.
Verify that the vacuum system pressure is within the manufacturer's specified range.
- Instrument and Case Inspection:
Visually inspect the heading indicator and its case for any signs of damage, cracks, or loose fittings.
Make sure the instrument's glass is clean and clear for easy readability.
- Zero Setting:
Set the heading indicator to the correct heading using the aircraft's magnetic compass or another reliable heading reference. This process is known as "synchronizing" the heading indicator.
- Gyro Drift Check:
- Operation Check:
Thus,
Perform pre-flight checks on the vacuum-driven heading indicator, including the power source, zero setting, gyro drift, and accurate operation before an IFR flight.
Learn more about pre-flight checks here:
https://brainly.com/question/34119472
#SPJ7
A microscope illuminator uses a transformer to step down the 120 V AC of the wall outlet to power a 12.0 V,50 W microscope bulb. What is the resistance of the bulb filament
Answer:2.88 ohms
Explanation:
R= V^2 / P
12^2/50
144/50
2.88 ohms
3. Write the differential equation xy + y² = 0 in differential form. E. Write the differential equation (y)2 - 5y + 6 = (x+y)(y-2) in standard form.
The differential equation x · y' + y² = 0 in differential form is x · dy + y² · dx = 0.
The standard form of the differential equation (y')² - 5 · (y') + 6 = (x + y) · (y' - 2) is the equation y' - y - 3 = x.
How to analyze ordinary differential equations
In the first part of this problem we have a nonlinear diferential equation of the form f(x, y, y') = 0, which has to be changed into diferential form, defined below:
M(x, y) dx + N(x, y) dy = 0, where y' = dy / dx. (1)
Now we proceed to work on the ordinary differential equation:
x · y' + y² = 0
x · y' = - y²
x · (dy / dx) = - y²
x · dy = - y² · dx
x · dy + y² · dx = 0
The differential equation x · y' + y² = 0 in differential form is x · dy + y² · dx = 0.
The second part of the problem involves another nonlinear differential equation, of which we must find its standard form, also defined below:
f(y', y) = g(x) (2)
Finally, we proceed to modify the equation:
(y')² - 5 · (y') + 6 = (x + y) · (y' - 2)
(y' - 3) · (y' - 2) = (x + y) · (y' - 2)
y' - 3 = x + y
y' - y - 3 = x
The standard form of the differential equation (y')² - 5 · (y') + 6 = (x + y) · (y' - 2) is the equation y' - y - 3 = x.
RemarkThe statement presents typing mistakes, correct form is shown below:
3. Write the differential equation x · y' + y² = 0 in differential form. Write the differential equation (y')² - 5 · y' + 6 = (x + y) · (y' - 2).
To learn more on differential equations: https://brainly.com/question/14620493
#SPJ1
The motor branch circuit short circuit and ground-fault protective device shall be capable of carrying the ______ current of the motor.
Answer:
Starting current
Explanation:
The motor branch circuit short circuit and ground-fault protective device shall be capable of carrying the Starting current of the motor.
The ________ system removes and reduces heat caused by friction between the moving engine parts and the explosion of fuel in the cylinders.
The cooling system removes and reduces the heat caused by friction between the moving engine parts and the explosion of fuel in the cylinders. The correct option is d)
What is the cooling system?The cooling system is a system that works on engines of machines and cars. It prevents friction for the parts of the engine that are moving and runs a smooth machine.
It also prevents the heating of the machines. Furthermore, it is like a liquid coolant that cools the machines and prevents overheating.
Thus, the correct option is d) cooling.
To learn more about the cooling system, refer to the below link:
https://brainly.com/question/18454101
#SPJ1
The question is incomplete. Your most probably complete question is given below:
a) steering
b) brake
c) suspension
d) cooling
A 500 kva load has a power factor of 90% lagging and is supplied by a 480 v source. Determine the three line currents
Answer:
pf=kw/kvar
Explanation: voltage p=vi
A tensile-reinforced t beam is to be designed to carry a uniformly distributed load on a 20-ftsimple span. The total moment to be carried is mu-5780 in-kips. Concrete dimensions, governed by web shear and clearance requirements, are b 20 in, b 10 in, he-5in, and d 20 in. Iffy 60 ksi and fe-4ksi, what tensile reinforcement is required at midspan? select appropriate reinforcement to provide this area of steel and check concrete cover limitations, assuming no. 3 stirrups. What total depth h is required? sketch your design.
The tensile reinforcement is required at midspan is 3.103 in^2 and the total depth h is required is 17 in.
organizing the information given in the statement:
t beam is to be designed to carry a uniformly distributed load on a 20-ftsimple spanThe total moment to be carried is mu-5780shear and clearance requirements, are b 20 in, b 10 in, he-5in, and d 20 in. Iffy 60 ksi and fe-4ksiWith that infromation we can say, total moment to be caried out in the bean is:
M=5780 in kips
Characteristics strength of concreete is 4ksi
Characteristics strength of steel is 60ksi
Find the depht of stress block:
[tex]a=\frac{A_s*f_y}{0.85*fc}[/tex]
Substitute 4ksi in fc, 60 ksi in fy we have:
[tex]a= 17.65 A_s[/tex]
Find the area of tensile reinforcement:
[tex]\phi M= \phi A_sf_y(d-a/2)\\5780=A_s*60(20-17.65A_s/2)\\A_s=3.103 in^2[/tex]
Provide 3 stirrups of 9 inches bar (wich has a diameter of 1.128 inches)
Provide 3 inch as cover fot T-beam, therefore the effective depth is:
h=20-3=17 in
See more about tensile-reinforced at brainly.com/question/18273420
#SPJ1
Cd, also called blank______, was the first widely available optical format for pc users.
Answer: Compact Disc
During welding in the vertical position, the torch angle can be varied to control sagging.
a. true
b. false
Answer:
A: True
Explanation:
The given statement is true.
During welding in the vertical position, the torch angle is not typically varied to control sagging. This statement is False.
Sagging, also known as downward distortion, occurs when the molten metal in the weld pool pulls downward due to gravity.
To control sagging, the primary method is to adjust the welding parameters, such as the welding current, travel speed, and electrode angle, rather than the torch angle.
Maintaining a proper travel speed and using appropriate welding techniques, such as weaving, can also help to manage sagging.
Ensuring proper joint preparation and fit-up, as well as using suitable welding procedures, are crucial in minimizing sagging and achieving high-quality vertical welds.
Know more about sagging:
https://brainly.com/question/339185
#SPJ7
c) Although Ethics means different thi ng to different people, its meaning
al ways has some ethical implications. Ethics are standards of right and
wrong, good and bad. They are concerned with what one has to do to fulfill one’s moral duty. In your opinion, is it good t o practice euthanasia in
Ghana?
I would say it is not good (ethical) to practice euthanasia in Ghana because it limits and prunes the chances and fundamental rights to life of a patient.
What are ethics?Ethics can be defined as a set of unwritten and written standards of good and bad, right and wrong, principles, values or rules of moral conduct that are established to guide human behaviors, especially with respect to their relationship with others.
What is euthanasia?Euthanasia can be defined as a medical practice which typically involves ending or cutting short the life of a terminally ill patient or someone who is experiencing great pain and suffering, in order to limit and end the patient's suffering.
In my opinion, I would say it is not good (ethical) to practice euthanasia in Ghana because it limits and prunes the chances and fundamental rights to life of a patient.
Read more on ethics here: brainly.com/question/24277955
#SPJ1
If the suction pressure of a system is 60 psig and the oil pump outlet is 85 psig, what is the net oil pressure?
Answer:
25 psig
Explanation:
The net oil pressure = 85 - 60 = 25 psig
The type of current that flows from the electrode across the arc to the work is called direct current electrode?
Answer:
Direct Control Electrode Negative) (DCEN)
Explanation:
The type of current that flows from the electrode across the arc to the work is called direct current electrode is called DCEN.
Which disk interface uses parallel data transfer but has high reliability and an advanced command set? group of answer choices sata pata scsi sas
A disk interface that is designed and developed to use parallel data transfer but with high reliability and an advanced command set is: C. PATA.
What is a hard-disk drive?A hard-disk drive can be defined as an electro-mechanical, non-volatile data storage device that is made up of magnetic disks (platters) that rotates at high speed.
What is Disk Management?Disk Management can be defined as a type of utility that is designed and developed to avail end users an ability to convert two or more basic disks on a computer system to dynamic disks.
In Computer technology, PATA is a disk interface that is designed and developed to use parallel data transfer but with high reliability and an advanced command set.
Read more on Disk Management here: brainly.com/question/6990307
#SPJ1
The regulator is closed when the adjusting screw is turned in (clockwise).
a. true
b. false
The regulator is closed when the adjusting screw is turned in (clockwise), this statement is false.
What is Regulator?Monitoring adherence to other legal and regulatory standards as well as contractual responsibilities to the government and users. establishing technical, safety, and quality requirements and ensuring that they are followed (if not already specified in the contract agreements). levying fines in the event of non-compliance.
The principal oversight organization for a bank or other financial institution is known as a primary regulator. Primary regulators are state or federal regulatory organizations, which are frequently the same organization that granted the financial institution's operating permit with a charter.
Hence, The regulator is closed when the adjusting screw is turned in (clockwise), it is turned Anticlockwise.
To know more about follow the link.
https://brainly.com/question/27289175
#SPJ5