The acceleration of the car is 3.56 m/s².
What is acceleration?Rate of change of velocity with time, both in terms of speed and direction. A point or object going straight ahead is accelerated when it accelerates or decelerates.
Some characteristics of acceleration are-
Acceleration is a vector quantity since it has a both magnitude and a direction. A vector quantity is also velocity. The velocity vector change during a time interval divided by that of the time interval is the definition of acceleration. The limit of both the ratio of the change in speed throughout a given interval of time approaches zero determines the instantaneous acceleration (at the specific time and location) ( Instantaneous rates of change). For instance, acceleration will be stated as metres per second if velocity is represented in meters per second.The formula for acceleration is;
[tex]\bar{a}=\frac{v-v_{0}}{t}=\frac{\Delta v}{\Delta t}[/tex]
[tex]\begin{aligned}&\bar{a}=\text { average acceleration } \\&v=\text { final velocity } \\&v_{0}=\text { starting velocity } \\&t=\text { elapsed time }\end{aligned}[/tex]
The starting velocity is 3.50 m/s
The final velocity is 14.8 m/s.
The elapsed time is 3.17 s.
Substitute all the values in the formula of acceleration;
[tex]\bar{a}=\frac{14.8-3.50}{3.17}\\\bar{a}=3.56[/tex]
Therefore, the acceleration of the car is 3.56 m/s².
To know more about acceleration, here
https://brainly.com/question/460763
#SPJ4
When ever nitrogen is used to pressurize or blow debris out of the system the nitrogen?
I need help with these 2 physics questions ASAP thanks (Note, ignore problem 6 as I have solved it)
The final velocity of the ball is 20.8 m/s. Option C
What is the final speed?Now we have the equation;
v^2 = u^2 + 2gh
v = final velocity
u = initial velocity
a = acceleration
s = distance
v^2 = (11.4)^2 + (2 * 10 * 15.5)
v^2 = 129.96 + 310
v = √ 129.96 + 310
v = 20.8 m/s
b)
Given that;
R = u^2sin2θ/g
Where;
g = acceleration due to gravity
θ = acute angle
u = velocity
R = (60)^2 sin2(30)/10
R = 310 m
Learn more about projectile:https://brainly.com/question/11422992
#SPJ1
Discuss the application of faraday's law to the existence (not the sign) of the induced voltage before you energize the primary coil
The application of faraday's law to the existence (not the sign) of the induced voltage before you energize the primary coil
The magnitude of the emf generated in a circuit is proportional to the rate of change with time t of the magnetic flux that cuts across the circuit emf, according to this relationship, also known as Faraday's law of induction (to distinguish it from his laws of electrolysis).
According to Faraday's law of induction, when a magnetic field changes, a voltage results. This difference in electric potential can induce electric currents to flow.
The first faraday's law states that the amount of chemical change caused by a current at an electrode-electrolyte interface is proportional to the amount of electricity used, while the second law states that different substances can undergo different amounts of chemical change when the same amount of electricity is applied to them.
To learn more about faraday's law please visit-
https://brainly.com/question/1640558
#SPJ4
If the signal light changes from green to yellow as you enter the intersection, you should:_______
When the light turns from green to yellow while you are already in the intersection, proceed through the intersection at a safe speed.
To find the answer, we have to study more about the importance of traffic signals.
What are the importance of yellow signal light in traffic?Recognize that you have the right-of-way when a yellow light is flashing. Reduce your speed as you get close to a flashing yellow light and keep an eye out for other cars that might not be paying attention to or respecting your right-of-way. You should safely stop your car at any intersection where there is a constant yellow light. When the light turns from green to yellow while you are already in the intersection, proceed through the intersection at a safe speed.Thus, we can conclude that, When the light turns from green to yellow while you are already in the intersection, proceed through the intersection at a safe speed.
Learn more about the traffic signals here:
https://brainly.com/question/15244990
#SPJ1
How does the value of gravitational
acceleration change when the distance
from the centre of the Earth increases?
Explanation:
according to my understanding, the value of gravitational acceleration changes because;different planets have different gravitational pull.
for example you may ask yourself why is it that the gravitational acceleration is not the same on earth and the moon.
this is because the gravitational force acting on an object on earth is greater than the gravitational force acting on an object and the Moon .
You know the moon is located in the space and one can fly, stand,dance etc.
all because the gravitational acceleration is low.
as for me when the distance from the centre of the Earth increases,
the gravitational acceleration decreases.
A good example is given by the moon.
The moon is miles away from the Earth and its gravitational acceleration is quite low .hope you got me.
Doug is doing work. without knowing exactly what he is doing, which can be said about the work he is doing?
Energy is transferred.
What is Work?Every time labour is performed, energy is transmitted, as shown by the definition of work in physics. Work is the result of the displacement's magnitude and the component of force acting in that direction.
What are 3 types of work done?
Positive Negative Zero work done.Work is the result of force and distance, or the force exerted over a specific distance. In other words, Work = Force x Distance.
Joules are used to measure work.
1. Positive Work: Positive work is when a force moves an object in that direction. The motion of a ball descending toward the earth while it is displaced in the direction of the force of gravity is an illustration of this type of labour.
2. Negative Work: The work is said to be negative if the force and the displacement are in the opposing directions. For instance, if a ball is thrown high, its displacement will also be upwards, while the force from the earth's gravity will be downward.
3. Zero Work: When the force and displacement directions are parallel to one another, there is no work done on the item by the force.
to learn more about Work go to - https://brainly.com/question/6535839
#SPJ4
Answer:Energy is transferred.
Explanation: Took the test and Passed
An electron moving at in a 1. 25-t magnetic field experiences a magnetic force of. what angle does the velocity of the electron make with the magnetic field? there are two answers
The angle the velocity of the electron make with the magnetic field is sin(∅) = 90° answer.
The equation F = qv X B may be damaged down into two elements, the significance and the path. The importance is given by F = qv B sin(∅),
Magnetic field = 1. 25-tesla
F = qv B sin(∅)
= sin(∅) = F/qv B
sin(∅) = qv X B/qv B
sin(∅) = 90° answer.
The most importance of the magnetic pressure appearing at the electron whilst its velocity v is perpendicular to B i.e magnetic discipline. The route of the force acting on the electron is the course the palm of the left hand faces. The path of the magnetic area, the direction of the transferring rate, and the route of the pressure on the particle are all perpendicular to each other.
Learn more about magnetic force here:-https://brainly.com/question/2279150
#SPJ4
The central pitch around which a scale and its associated harmonies is built is called _______.
The central pitch around which a scale and its associated harmonies is built is called Tonic.
What is tonic?As the first and last notes of the scale used to compose a piece of music, the tonic pitch serves as both the focal point of the composing process and the pitch designation for the key.What is a wave? the regular, systematic spread of disturbances from one location to another. The waves that travel on water's surface are the most well-known, but waves also exist in sound, light, and the movement of subatomic particles. The disturbance periodically oscillates with a set frequency and wavelength in the simplest waves.Types of waves:Transverse and longitudinal waves are the two types of waves. While longitudinal waves are similar to those of sound, consisting of alternating compressions and rarefactions in a medium. Transverse waves are like those on water, with their surface moving up and down.To learn more about tonic visit:
https://brainly.com/question/18101863
#SPJ4
What charge in microcoulombs needs to be plaaced at the orgin to create an electric force?
It follows coulombs law.
According to Coulomb’s law, the force of attraction or repulsion between two charged bodies is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. It acts along the line joining the two charges considered to be point charges.
In Short: F ∝ q1q2/d2
where,
ε is absolute permittivity,
K or εr is the relative permittivity or specific inductive capacity
ε0 is the permittivity of free space.
K or εr is also called a dielectric constant of the medium in which the two charges are placed.
One coulomb of charge is that charge which when placed at rest in vacuum at a distance of one metre from an equal and similar stationary charge repels it and is repelled by it with a force of 9 x 109 newton.
Learn more about Coulombs law here:
https://brainly.com/question/506926
#SPJ4
According to the solar nebula theory,whyisthereacommon direction of revolution and rotation for most objects in the solar system?
According to the solar nebula theory, the common direction of revolution and rotation for most objects in the solar system is because most objects in the Solar System have a common direction of revolution and rotation because they formed from the same rotating gas cloud.
The nebular theory states that our solar system formed from the gravitational collapse of a giant interstellar gas cloud—the solar nebula.
In nebula hypotheses its been said that solar system formed at the same time as the Sun . The nebular hypothesis is the idea that a spinning cloud of dust made of mostly light elements, called a nebula, flattened into a protoplanetary disk, and became a solar system consisting of a star with orbiting planets
Laplace theorized that the Sun originally had an extended hot atmosphere throughout the Solar System, and that this protostar cloud cooled and contracted. As the cloud spun more rapidly, it threw off material that eventually condensed to form the planets.
Since , Most objects in the Solar System have a common direction of revolution and rotation because they formed from the same rotating gas cloud.
To learn more about solar system here
https://brainly.com/question/12075871
#SPJ4
Let u = ⟨1, 5⟩, v = ⟨–3, 3⟩, and w = ⟨2, 3⟩. what is the direction angle of 4w – (2u v)?
The direction angle of 4w- (2u v) is equal to 353.7°.
Direction angle of a vectorA vector's direction angle is the angle formed by the positive x-axis and the vector v. The arctangent of the ratio between the vertical and horizontal components of the vector, v=ai+bj, can be used to determine the direction angle,, of the vector.
What is the formula for direction?Use the formula = arctan(y/x) to determine the direction of the vector v = (x, y), where is the smallest angle the vector makes with the horizontal axis and x and y are its component vectors.
Does an angle have a direction?The angle a vector creates with a horizontal line is used to determine the vector's direction. The formula:where x is the horizontal change and y is the vertical change, gives the direction angle of a vector.
learn more about direction angle here
https://brainly.com/question/17330233
#SPJ4
What does an alpha particle consist of? one proton and two neutrons two protons and two neutrons two protons and one electron one proton and two electrons
They are helium nuclei, which consist of two protons and two neutrons. The net spin on an alpha particle is zero. They result from large, perilous atoms via a process called alpha decay.
What is helium nuclei?The nucleus of the helium atom also understood as the α-particle, includes two protons and two neutrons, encompassed by two electrons.Alpha particles are helium nuclei with two protons and two neutrons attached. The development of their high mass and an electrical charge is their inability to infiltrate as deep as other particles such as protons and electrons.Particle beams contain α (alpha)-particles, β (beta)-particles, neutron beams, etc. α-particles are helium middles consisting of two protons and two neutrons that have lived removed at high speed, while β-particles are electrons removed from a nucleus. Particle shafts also include neutron beams and proton beams.To learn more about helium nuclei, refer to:
https://brainly.com/question/26226232
#SPJ4
A process in which a large nucleus splits into two or more parts is called ?
(A) nuclear fission
An alpha particle is made up of _____.
(C) two protons and two neutrons
Which statement best describes the type of radioactive decay shown in the model?
(D) The model shows alpha decay, which is a type of nuclear fission.
Is beta decay a form of nuclear fission?
Responses
(A) No, it is not because the mass number does not change.
Which statement correctly classifies gamma emission?
(D) Gamma emission is a type of radioactive decay, but it is not a fission reaction.
Explanation:i just did the quick check, hope this helps.
An electron is traveling at 0. 85c. what is its mass? (the rest mass is 9. 11 × 10-31 kg. )
The mass of the electron is [tex]1.72\times 10^{-30}[/tex] Kg.
How can we calculate the mass of the electron?To calculate the mass of the electron we are using the formula,
[tex]m=\frac{m_{0} }{\sqrt{1-\frac{v^{2} }{c^{2} } } }[/tex]
Here we are given,
[tex]m_0[/tex]=The rest mass of an electron = [tex]9. 11 \times 10^{-31}[/tex] kg.
v= The velocity of electron = 0. 85c.
c= The velocity of light = c. (c=[tex]3\times 10^8[/tex] m/s)
We have to found the mass of an electron = m Kg.
Now we substitute the known values, we found that,
[tex]m=\frac{9. 11 \times 10^{-31} }{\sqrt{1-\frac{(0.85c)^{2} }{c^{2} } } }[/tex]
Or,[tex]m=\frac{9. 11 \times 10^{-31} }{\sqrt{1-(\frac{0.85c}{c})^2 } }[/tex]
Or,[tex]m=\frac{9. 11 \times 10^{-31} }{\sqrt{1-({0.85})^2 } }[/tex]
Or, [tex]m=1.72\times 10^{-30}[/tex] Kg.
From the above calculation we can conclude that, The mass of the electron is [tex]1.72\times 10^{-30}[/tex] Kg.
Learn more about electron:
https://brainly.com/question/860094
#SPJ4
If a violin string vibrates at 430 hz as its fundamental frequency, what are the frequencies of the first four harmonics?
If a violin string vibrates at 430 hz as its fundamental frequency,then the frequencies of the harmonics are 880, 1320, 1760
The frequency in physics is the number of waves passing a fixed location in a unit of time. It also indicates how many cycles or vibrations a body in periodic motion experiences in a given unit of time.
How frequently something occurs is what is meant by the word frequency. A person blinking their eyelids 47 times in a minute is an example of frequency. the quality or state of happening frequently.
Integer (whole-number) multiples of the fundamental frequency are used to define harmonics, which are voltages or currents that function at certain frequencies. This means that for a waveform with a fundamental frequency of 50 Hz, the second harmonic frequency would be 100 Hz (2 x 50 Hz), the third harmonic would be 150 Hz (3 x 50 Hz), etc.
To learn more about frequency please visit -
https://brainly.com/question/5102661
#SPJ4
If he were able to maintain this constant rate of acceleration, what would have been his speed as he finished the race?
a) 4.8 m/s² his average acceleration during the first 2.5 s
b) 15 m distance he cover during the first 2.5 seconds.
c) 31 m/s his speed as he finished the race.
(a) How to calculate the Average Acceleration ?Average acceleration is calculated by using Newtons first law of motion
v = u + at
where
u is initial velocity
v is final velocity
a is constant acceleration
t is time
Given u = 0m/s , v = 12 m/s and t = 2.5 sec
Therefore average acceleration is given by
[tex]a=\frac{v}{t}[/tex]
[tex]a=\frac{12}{2.5}[/tex]
a = 4.8 m/sec²
b) Here we will use newtons second law of motion
[tex]s=ut+\frac{1}{2}at^{2}[/tex]
On substituting value we get
s = 15m
c) Here we will use newtons third law of motion
v² = u² + 2as
Here u = 0 , a = 4.8 m/s² and s = 100 m
Therefore
v² = 960
v = 31 m/s
Disclaimer: the question was given incomplete in the portal. Here is the complete question.
Question: Usain Bolt's 100m sprint Runner set the world record for the100 meter sprint during the 2009World Championships in Berlin with a time of 9.58 s, reaching a top speed of 12 m/s in about 2.5 s.
a. What was his average acceleration during the first 2.5 s?
b. What distance did he cover during the first 2.5 seconds, assuming his acceleration was constant?
c. If he were able to maintain this constant rate of acceleration, what would have been his speed as he finished the race?
Learn more about Newtons law of motion here:
https://brainly.com/question/12525794
#SPJ4
Suppose a bicyclist rides at a constant velocity of 4.4 m/s up a 10° slope. the total mass of bicycle and rider is 85 kg. neglecting air friction, what is his power output?
Power output will be = 637.7448 W
Newton's third law states that when two bodies interact, they apply forces to one another that are equal in magnitude and opposite in direction. The third law is also known as the law of action and reaction.
Power Output means the average rate of electric energy delivery during one Metering
The upward force by which the bicycle is riding up will be equal and opposite to m*g*sin(10°) (using newtons third law)
Force (upward ) = m*g*sin(10°)
given
v = 4.4 m/s
mass (m) = 85 kg
F (upward ) = m*g*sin(10°)
ma = m*g*sin(10°)
a = g*sin(10°)
= 9.8 * sin(10°) = 1.7052 m / [tex]s^{2}[/tex]
Power = work / time = Force . displacement / time = mass * acceleration * velocity
= m * a * v
= 85 * 1.7052 * 4.4
= 637.7448 W
To learn more about Newton's third law here
https://brainly.com/question/23772134
#SPJ4
What is the reactance of a 9. 0×10−2 μf capacitor connected to a 23 kv (rms), 550 hz line?
The Capacitive reactance of the capacitor is 3.22kΩ.
To find the answer, we have to study about the Capacitive reactance.
How to find the Capacitive reactance?It is given that,[tex]C=9*10^{-8}F\\f=550Hz\\[/tex]
Thus, the expression for capacitive reactance will be,[tex]X_c=\frac{1}{2\pi fC}[/tex]
By substituting values, we get,[tex]X_c=\frac{1}{2\pi *550*9*10^{-8}} \\\\X_c=3.22*10^3Ohm.[/tex]
Thus, we can conclude that, the Capacitive reactance of the capacitor is 3.22kΩ.
Learn more about the Capacitive reactance here:
https://brainly.com/question/27853857
#SPJ4
When two vectors are added geometrically (by drawing them), how are they arranged?
Two vectors are added geometrically (by drawing them), they arranged in such a way that Tail of one touching the head of the other .
A vector is a quantity or phenomenon that has two independent properties: magnitude and direction. The term also denotes the mathematical or geometrical representation of such a quantity. Triangle law of vector addition is used to find the sum of two vectors when the head of the first vector is joined to the tail of the second vector.
Magnitude of the resultant sum vector R: R = √([tex]P^{2}[/tex] + 2PQ cos θ + [tex]Q^{2}[/tex])
According to the Parallelogram law of vector addition: If two vectors are considered to be the adjacent sides of a parallelogram, then the resultant of the two vectors is given by the vector that is diagonal passing through the point of contact of two vectors. drawn from the same point.
To learn more about vectors here
https://brainly.com/question/13322477
#SPJ4
The electric potential at the origin of an xy-coordinate system is 40 v. a -8.0-μc charge is brought from x = [infinity] to that point. what is the electric potential energy of this charge at the origin?
Electric potential energy of that charge at origin = 40 V
Electric potential, the amount of work needed to move a unit charge from a reference point to a specific point against an electric field.
The electric potential energy of any given charge or system of changes is termed as the total work done by an external agent in bringing the charge or the system of charges from infinity to the present configuration without undergoing any acceleration.
Electric potential energy is defined as the total potential energy a unit charge will possess if located at any point in the outer space.
Potential energy at a point = change in electric potential to bring it from infinity to that point
Potential energy = Potential at that point - Potential at infinity
conventionally , potential at infinity is taken as zero
Potential energy = Potential at that point
hence , Potential energy of that charge at origin = Electric Potential at the origin
Potential energy of that charge at origin = 40 V
To learn more about Electric potential energy here
https://brainly.com/question/16890427?referrer=searchResults
#SPJ4
The flow of electricity can be compared of water in
The flow of electricity can be compared of water in the pipes because both water and electricity moves in the channel.
How we compare the flow of electricity to water?Water flowing in pipes is like flowing of electricity in a circuit. A battery is like a pump from where electricity comes and moves in the circuit. Electrons flowing through wires are like water molecules flowing through pipes. So in comparison between water and electricity, both water and electricity are similar to each other in flowing and movement.
So we can conclude that the flow of electricity can be compared of water in the pipes because both water and electricity moves in the channel.
Learn more about electricity here: https://brainly.com/question/776932
#SPJ1
A car moving 18.2 m/s starts to coast up a frictionless 10.0 degree hill. how far does it roll before coming to a stop
The distance covered by the car before it stops is 98.58 m.
Calculation:Force acting on the car will be
ma = -mg sinθ
where,
m = mass of the car
a = acceleration of the car
g = acceleration due to gravity
θ = angle of inclination
Given,
θ = 10°
Put the values in the above equation,
ma = -mg sinθ
a = -g sin 10°
a = -10 (0.173)
a = -1.73 m/s²
We know the initial velocity is 18.2m/s and when the car comes to a stop the final velocity becomes zero.
u = 18.2 m/s
v= 0 m/s
Using one of the kinematics equations,
v² - u² = 2as
0 - (18.2)² = 2 (-1.73) (s)
331.24 = 3.36 (s)
s = 98.58 m
Hence, the distance covered by the car before it stops is 98.58 m.
Learn more about the other way to solve such numerical here:
https://brainly.com/question/12985617
#SPJ4
Considering how the predictions compare to the observations, what does this imply about the mass distributed in the galaxy?
Answer:
The observations show a higher velocity than is predicted, mainly in the galaxy's outer regions, indicating that there is more mass in the exterior areas than we can see.
The observations show higher velocities than is predicted, mostly in the outer regions of the galaxy, indicating that there is more mass in the outer regions than we can see.
GalaxyA galaxy is a collection of gravitationally bound stars, stellar remains, interstellar gas, dust, and dark matter. The name comes from the Greek word galaxias, which means "milky" in reference to the Milky Way galaxy, which houses the Solar System. Galaxies range in size from dwarfs, which have fewer than 100 million stars, to supergiants, which have 100 trillion stars around their galaxy's center of mass. Galaxies, on average, contain an estimated 100 million stars.
A galaxy can be classified as elliptical, spiral, or irregular based on how it appears to the human eye. Supermassive black holes are considered to be present in the centers of several. Sagittarius A*, the name given to the center black hole of the Milky Way, has a mass that is four million times that of the Sun.
Learn more about galaxy here:
https://brainly.com/question/2905713
#SPJ4
Electrolysis can be used to purify silver. What mass of silver would plate onto the pure electrode if a current of 6. 8 a flowed through the cell for 72 minutes?
32.88grams of (Ag) silver would plate onto the pure electrode if a current of 6. 8A flowed through the cell for 72 minutes.
Silver can be electroplated at the cathode of an electrolysis cell by the half-reaction:
Ag+(aq)+e→Ag(s).
By Using the equation
Q= I×t, where Q = charge
I = current = 6.8 A
t= time in seconds= 72×60=4320s
So,
Q=6.8×4320
Q = 29,376C
We see that 1 mole of electrons produces 1 mole of Ag from the half reaction.
1mole of electrons= 96,500C
xmoles of electrons= 29,376C
Cross multiplying;
29,376= 96,500 × x
Now , dividing both sides of the by 96,500
29,376/96,500=x
0.3044 moles of electrons will produce
0.3044×108 = 32.88grams of Ag
Therefore, 32.88grams of (Ag) silver would plate onto the pure electrode if a current of 6. 8A flowed through the cell for 72 minutes.
Learn more about Ag here;
https://brainly.com/question/3023145
#SPJ4
In a naturally converging beam, the distance from the face of the transducer to the narrowest point of the beam is known as?
Answer:
focal length
Explanation:
This describes focal length of the beam
Which has more total enthalpy 3kg of 20% of salt brine at 65 degrees Celsius or 5kg of 20% salt brine at 50 Degrees celsius, assuming 0 enthalpy at 0 degrees celsius? The specific heat capacity of 20% salt brine is 3.56kJ/kg*C
The 3kg of 20% of salt brine at 65 degrees Celsius has more enthalpy than the 5kg of 20% salt brine at 50 Degrees Celsius.
What is enthalpy?Enthalpy is defined as the total heat content of a system. The enthalpy is a measure of the total work which the system can do plus the internal energy of the system.
The enthalpy of the given solutions can be calculated as follows:
Enthalpy = mass * specific heat capacity * temperature change.For the 3kg of 20% of salt brine at 65 degrees;
mass of salt = 3 * 20% = 0.6 kg
specific heat capacity = 3.56kJ/kg*C
temperature change = 65°C
Enthalpy = 0.6 * 3.56 * 65
Enthalpy = 232 kJ
For the 5kg of 20% salt brine at 50 Degrees Celsius;
mass of salt = 5 * 20% = 1 kg
specific heat capacity = 3.56kJ/kg*C
temperature change = 50°C
Enthalpy = 1 * 3.56 * 50
Enthalpy = 178 kJ
Therefore, the 3kg of 20% of salt brine at 65 degrees Celsius has more enthalpy.
In conclusion, the enthalpy or heat content of the solutions depends on the mass and temperature change.
Learn more about enthalpy at: https://brainly.com/question/14047927
#SPJ1
Three resistors of 4. 0, 6. 0, and 10. 0 ω are connected in parallel. if the combination is connected in series with a 12. 0-v battery and a 2. 0-ω resistor, what is the current through the 10. 0-ω resistor
The current through the 10 Ω resistor is 0.586A which is connected with a resistor in series combination.
Voltage divides in a Series combination and current divides in a parallel combination.
Let the three resistors joined in parallel be R₁, R₂, R₃
where, R₁= 4 Ω
R₂ = 6 Ω
R₃ = 10 Ω
Given, a battery of 12V and a 2Ω resistor say r is series with the parallel combination.
Equivalent resistance(R) in parallel combination is:
1/R = 1/R₁ + 1/R₂ + 1/R₃
1/R = 1/4 + 1/6 + 1/10
On solving, R = 1.9 Ω
Now, the Equivalent resistance(R) of parallel combination is in series with r = 2Ω
Let Equivalent resistance of Series combination be R'
R' = R + r
R' = 1.9 + 2 Ω
R' = 3.9 Ω
Now let's calculate the voltage drop in the resistor r = 2Ω
v = i × r where, i is the current in r and v is the voltage drop across r
v = 3.07 × 2
v = 6.14V
Voltage drop, V' across the Equivalent resistance(R) in parallel combination = Total voltage - voltage drop in the resistor r
V' = 12 - 6.14 V
V' = 5.86V
Now, the Voltage drop, V' across the Equivalent resistance(R) in parallel combination is same for all the three resistors R₁, R₂, R₃
So, Voltage is same in a parallel combination.
V' = I × R₃
5.86 = I × 10
I = 0.586A
Hence, The current through the 10 Ω resistor is 0.586A
Learn more about Series combination here, https://brainly.com/question/12400458
#SPJ4
What is the energy (in ev) of an x-ray photon that has a wavelength of 2. 4 nm ?
_______________
λ=2,4 nm = 2,4·10⁻⁹ m
c=3·10⁸ m/s
h=6,63·10⁻³⁴ J·s = 4,14·10⁻¹⁵ eV·s
_______________
E - ?
_______________
[tex]\displaystyle \boldsymbol{E}=h\nu =h \frac{c}{\lambda} =4,14\cdot 10^{-15} \; eV\cdot s\cdot \; \frac{3\cdot 10^8\; m/s}{2,4\cdot 10^{-9}\; m} =517,5\; eV\approx \boldsymbol{518\; eV}[/tex]
A runner exerts 2,000 j of work while traveling 10 m along a horizontal stretch of track. what average force was exerted by the runner?
The average force exerted by the runner is 200N.
A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
When a force is exerted across a distance to an item, work is accomplished. This implies that the total energy of an object will be impacted when a force is applied to it over a distance.
Work = Force x Distance
Force = work / distance
Force = 2000 J / 10 m
Force = 200 N
Hence, the average force exerted by the runner was 200N.
To know more about force refer to:
https://brainly.com/question/19129
#SPJ4
Sun has an eective temperature of about 5800 kelvins. What is the peak wavelength emitted by the sun?
By Wien's displacement law we can conclude that, the peak wavelength emitted by the sun for 5800K temperature is 499nm.
To find the answer, we have to know about Wien's distribution law.
How to find the maximum wavelength?The black-body radiation curve for various temperatures will peak at various wavelengths that are inversely proportional to the temperature, according to Wien's displacement law.It is given that, Sun has an active temperature of about 5800 kelvins.Thus, by Wien's distribution law, the maximus wavelength is,[tex]wavelength*T=2.898*10^{-3}mK\\wavelength=\frac{2.898*10^{-3}mK}{5800K}=499nm.[/tex]
Thus, by Wien's displacement law we can conclude that, the peak wavelength emitted by the sun for 5800K temperature is 499nm.
Learn more about the Wien's displacement law here:
https://brainly.com/question/15684028
#SPJ4
If the resistance in a circuit connected to a constant current is halved, how is the voltage in the circuit affected?.
The voltage is reduced by a factor of 2.
What is resistance?
Resistance is a proportion of the opposition to flow stream in an electrical circuit. Opposition is estimated in ohms, represented by the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who concentrated on the connection between voltage, current and resistance.The equation to compute the obstruction utilizing Ohm's Law is given as keeps:R = V I.
where,
R is the resistance of the resistor R in ohms (Ω)
V is the voltage drop in the resistor in volts.
To learn more about resistance from the given link
https://brainly.com/question/24858512
#SPJ4