A capacitor is connected across an ac source. Suppose the frequency of the source is doubled. What happens to the capacitive reactance of the inductor?.

The hydroxide ion concentration in a solution is 3.31*10^-8M.

To find the answer, we have to know more concentration of solution.

                     [tex]pH=-log[H_3O^+][/tex]

                   [tex][H_3O^+]=-10^{pH}=10^{-6.25}=5.6*10^{-7}M[/tex]

                        [tex]K_w=[H_3O^+][OH^-]\\Where,\\K_w=10^{-14}[/tex]

                         [tex][OH^-]=\frac{K_w}{[H_3O^+]} =\frac{10^{-14}}{10^{-6.52}}\\\\[/tex]

                           [tex][OH^-]=3.31*10^{-8}M[/tex]

Thus, we can conclude that, the hydroxide ion concentration in a solution is 3.31*10^-8M.

Learn more about the concentration of solution here:

https://brainly.com/question/17206790

#SPJ4

The cardiac output is 180ml/min.

What is Stroke volume(SV)?

SV = End diastolic volume (EDV) - End systolic volume (ESV)

SV = 120ml - 30ml

SV = 90ml

What is Cardiac Output?

CO = Stroke volume(SV) x Heart rate (HR)

CO = 90ml x 90bpm

CO = 180ml/min

To learn more about cardiac output: https://brainly.com/question/22735565

#SPJ4

The government expenditure is $20 billion.

To find the answer, we have to know about the Gross Domestic Product.

Using the output approach, the gross domestic product is determined as follows:

              [tex]GDP=C+I_g+G+X_n[/tex]

Where: C is conception, Ig is the gross investment, G is government expenditure, and Xn is the net exports.

                     [tex]G=GDP-C-I_g-X_n\\G=100-60-30+10=20 billion-dollers.[/tex]

Thus, we can conclude that, the government expenditure is $20 billion.

Learn more about the gross domestic product here:

https://brainly.com/question/15707668

#SPJ4

The greater impact force (in magnitude) acts on a) the car

Since , both the objects that is the car and a massive truck is coming and colliding with a certain speed , which means they are acquiring some momentum because of mass and speed , since they are coming with certain momentum when collided must have impacted each other.

Momentum is the measure of product of mass and velocity , if both of them are coming with same velocity then total dependency of impact will be on their masses  , since  truck is massive and car is small sports car , that means truck must have greater mass than the car , hence the greater impact force act on  a) the car

To learn more about momentum here

https://brainly.com/question/24030570

#SPJ4

Chyme is a semi-liquid paste that results from the mixing of partially digested food with gastric juice in the stomach.

When food enters the stomach, the gastric gland releases gastric juice, which the stomach's muscular wall thoroughly stirs into the meal. Chyme is the term for partially digested food that contains gastric juice.

Only a small amount of chyme is released into the small intestine at a time. The movement of chyme from the stomach into the small intestine is regulated by the pyloric sphincter.

In contrast, chyle is a milky body fluid made up of lymph and free fatty acids that have been emulsified (FFAs). While roughage refers to the inorganic fibre included in food, it is generated in the small intestine after the breakdown of fatty foods and taken up by lymph channels specifically known as lacteals.

Learn more about Chyme here:

https://brainly.com/question/17315460

#SPJ4

The empirical formula of the antimony chloride is [tex]SbCl_{3}[/tex].

Chemical formulas for compounds that simply specify the proportions of the elements they contain rather than the exact number or arrangement of atoms are known as empirical formulas. The element in the compound with the lowest whole number ratio would be this one.

Data obtained from the question

Antimony (Sb) = 0.338 g

Chlorine (Cl) = 0.295 g

Divide by their molar mass.

Sb = 0.338 / 122 = 0.0028

Cl = 0.295 / 35.5 = 0.0083

Divide by the smallest.

Sb = 0.0028 / 0.0028 = 1

Cl = 0.0083 / 0.0028 = 3

Thus, the empirical formula of the compound is SbCl₃.

To know more about empirical formulas visit:
https://brainly.com/question/14044066

#SPJ4

An Olympic high diver has gravitational potential energy because of her height. As she dives, kinetic energy becomes of her energy just before she hits the water.

Gravitational potential energy is the energy possessed or acquired by an object due to a change in its position when it is present in a gravitational field. In simple terms, it can be said that gravitational potential energy is an energy that is related to gravitational force or to gravity.

Kinetic energy is the energy of motion, observable as the movement of an object, particle, or set of particles.

When the high diver is standing stable and not moving , that diver has a gravitational potential energy because of the height . The moment she dives , before hitting the water , from being stationary she gained some momentum and come in motion , due to motion her gravitational potential energy will change to kinetic energy before hitting the ground.

To learn more about Gravitational potential energy  here

https://brainly.com/question/15978356

#SPJ4

The form of energy  that is transferred as waste energy by the television set is heat energy (80 J).

Based on the law of  conservation of energy, energy can neither be created nor destroyed but can be converted from one form to another.

The useful energy supplied to television set is calculated as follows;

= 119 J + 1 J = 120 J

The wasteful energy of the television set is calculated as follows;

= 200 J - 120 J = 80 J

Thus, the form of energy  that is transferred as waste energy by the television set is heat energy (80 J).

Learn more about conservation energy here: https://brainly.com/question/166559

#SPJ1

Answer:

The independent variable is the cause. Its value is independent of other variables in your study. The dependent variable is the effect. Its value depends on changes in the independent variable.

hope this helps you

Hi, your answer is below.

Time dilation is usually defined as the slowing of the passage of time experienced by objects in motion relative to an observer; measurable only a relativistic speeds.  Because time moves at various rates for the two of them depending on their relative velocities and/or proximity to things of considerable mass, if two persons (or objects) are moving relative to one another, they will age at separate rates. They will age differently from one another over time since their two timepieces will really tick at separate speeds. If they cross paths again later, they will both have aged differently, which may be determined by using their own timepieces, presuming they each had one. Einstein's Special and General Relativity equations, which have undergone extensive testing over the past 115 years and have never been shown to falter, regulate this "time dilation." The general relativity theory of Einstein, which states that a huge body's gravity warps space-time around it, causes time to move more quickly or more slowly depending on how far away the mass is from the observer, is what causes this so-called "time-dilation" phenomenon.

Thank you,

Eddie

If the electric potential at a point in space is zero, then the electric field at that point must be zero.

To find the answer, we have to know about the electric field.

                       [tex]E=\frac{V}{L}[/tex]

Thus, we can conclude that, If the electric potential at a point in space is zero, then the electric field at that point must be zero.

Learn more about the electric field here:

https://brainly.com/question/27752270

#SPJ4

The fringes will be farther apart

The width of the centre maxima on a screen is twice the distance between the dark fringes on either side at a distance L away: The pattern of light spreads out as you get further away from the screen (bigger L). The pattern of light widens as the hole gets smaller (smaller a).

The double-slit experiment involves directing a beam of light at a wall that has two vertical slits. The pattern that results from the light passing through the slits is captured on a photographic plate. A single line of light is seen when one slit is covered, aligned with the open slit.

Learn more about Double slit experiment here:

https://brainly.com/question/24196709

#SPJ4

kinetic energy 8.0 s later will be 11.35 joules

Given:

inertia,I=0.034kgm²

torque,τ=0.11nm

time,t=8.0s

To find:

kinetic energy,KE

we can find the kinetic energy by using

[tex]k = \frac{1}{2} iω {}^{2} [/tex]

so firstly we will find ω by finding α

α=τ/I

α=0.11/0.34

=3.23

then we find ω

ω=α×t

=3.23×8

=25.84

[tex]k = \frac{1}{2}iω {}^{2} [/tex]

k=1/2×0.34×(25.84)2

=1/2×22.70

k=11.35

so kinetic energy is 11.35 joules

learn more about kinetic energy from https:/brainly.com/question/28136083

#SPJ4

In comparison to a vacuum, the speed of light in glass is 1.52 times slower.

To find the answer, we need to know more about the refractive index.

This implies that the speed of light is 1.52 times slower in glass than in a vacuum.

Learn more about the refractive index here:

https://brainly.com/question/14300646

#SPJ4

The military time corresponding to 3:00p.m is 1500, and it is pronounced as fifteen hundred hours.

To find the answer, we have to know more about the Military time.

Thus, we can conclude that the option B is right.

Learn more about the time here:

https://brainly.com/question/555814

#SPJ1

Possible beat frequencies with tuning forks of frequencies 255, 258, and 260 Hz are 2, 3 and 5 Hz respectively.

The beat frequency refers to the rate at which the volume is heard to be oscillating from high to low volume. For example, if two complete cycles of high and low volumes are heard every second, the beat frequency is 2 Hz. The beat frequency is always equal to the difference in frequency of the two notes that interfere to produce the beats. So if two sound waves with frequencies of 256 Hz and 254 Hz are played simultaneously, a beat frequency of 2 Hz will be detected. A common physics demonstration involves producing beats using two tuning forks with very similar frequencies. If a tine on one of two identical tuning forks is wrapped with a rubber band, then that tuning forks frequency will be lowered. If both tuning forks are vibrated together, then they produce sounds with slightly different frequencies. These sounds will interfere to produce detectable beats. The human ear is capable of detecting beats with frequencies of 7 Hz and below.

A piano tuner frequently utilizes the phenomenon of beats to tune a piano string. She will pluck the string and tap a tuning fork at the same time. If the two sound sources - the piano string and the tuning fork - produce detectable beats then their frequencies are not identical. She will then adjust the tension of the piano string and repeat the process until the beats can no longer be heard. As the piano string becomes more in tune with the tuning fork, the beat frequency will be reduced and approach 0 Hz. When beats are no longer heard, the piano string is tuned to the tuning fork; that is, they play the same frequency. The process allows a piano tuner to match the strings' frequency to the frequency of a standardized set of tuning forks.

Learn more about  beat frequency here : https://brainly.com/question/14157895

#SPJ4

When conducting a hypothesis test for a given sample size, if α is increased from 0.05 to 0.10, then the probability of incorrectly rejecting the null hypothesis increases ,the probability of incorrectly failing to reject the null hypothesis decrease, the probability of Type II error decreases.

A. the probability of incorrectly rejecting the null hypothesis increases

B. the probability of incorrectly failing to reject the null hypothesis decreases

C. the probability of Type II error decreases

Higher values of α make it easier to reject the null hypothesis, so choosing higher values for α can reduce the probability of a Type II error. The consequence here is that if the null hypothesis is true, increasing α makes it more likely that we commit a Type I error.

A type 1 error is also known as a false positive and occurs when a researcher incorrectly rejects a true null hypothesis. This means that your report that your findings are significant when in fact they have occurred by chance.

hence , all the options are correct

To learn more about null hypothesis here

https://brainly.com/question/19263925

#SPJ4

The value of the equivalent resistance for the three resistors connected in series will be the sum of the three values.

To find the answer, we have to know more about the equivalent resistance.

                [tex]R_E=R_1+R_2+..........+R_n[/tex]

               [tex]R_E=R_1+R_2+R_3[/tex]

Thus, we can conclude that, the value of the equivalent resistance for the three resistors connected in series will be the sum of the three values.

Learn more about the equivalent resistance here:

https://brainly.com/question/11603204

#SPJ4

Spring tides have higher high tides and lower low tides while on the other hand, neap tides are the tides that have lower high tides and higher low tides.

Spring tides are the type of tides in which higher high tides and lower low tides are present while on the other hand, neap tides are the tides that have lower high tides and higher low tides. The range of difference in water level between high and low tide is more larger in a spring tide as compared to neap tides.

So we can conclude that Spring tides have higher high tides and lower low tides while on the other hand, neap tides are the tides that have lower high tides and higher low tides.

Learn more about tides here: https://brainly.com/question/2604305

#SPJ1

At r = 0.766 R the magnetic field intensity will be half of its value at the center of the current carrying loop.

We have a circular loop of radius ' r ' carrying current ' i '.

We have to find at what distance along the axis of the loop is the magnetic field one-half its value at the center of the loop.

The formula to calculate the magnetic field intensity due to a current carrying ( i ) circular loop of radius ' R ' at a distance ' x ' on its axis is given by -

[tex]B(x) = \frac{\mu_{o} iR^{2} }{2(x^{2} +R^{2})^{\frac{3}{2} } }[/tex]

Now, for magnetic field intensity at the center of the loop can calculated by putting x = 0 in the above equation. On solving, we get -

[tex]B(0) = \frac{\mu_{o} i}{2R}[/tex]

Let us assume that the distance at which the magnetic field intensity is one-half its value at the center of the loop be ' r '. Then -

[tex]\frac{\mu_{o} iR^{2} }{2(r^{2} +R^{2})^{\frac{3}{2} } } = \frac{1}{2} \frac{\mu_{o}i }{2R}[/tex]

[tex]2R^{3} = (r^{2} +R^{2} )^{\frac{3}{2} }[/tex]

[tex]4R^{6} = (r^{2} +R^{2} )^{3}[/tex]

[tex]r^{2} =0.587R^{2}[/tex]

r = 0.766R

Hence, at r = 0.766 R - the magnetic field intensity will be half of its value at the center of the current carrying loop.

To solve more questions on magnetic field intensity, visit the link below-

brainly.com/question/15553675

#SPJ4

A Capacitor is a device consisting of two conductors that can be charged with equal and opposite charges, separated by a thin insulator.

According to principle of a capacitor, capacitor is a system of conductors or dielectric.

If there is a single conductor, it cannot holds very much current then its potential reaches to its maximum values and it cannot hold more charge.

If we place another conductor near it, its potential becomes low and it is able to store more charge.

We know from the definition of the capacitor, A capacitor is a two-terminal electrical device that possesses the ability to store energy in the form of an electric charge. It consists of two electrical conductors that are separated by a distance.  

Capacitors store energy by holding apart pairs of opposite charges. The simplest design for a capacitor is a parallel plate capacitor.

Therefore, this device is called a capacitor.

Learn more about capacitor:

https://brainly.com/question/13578522

#SPJ1

The angle between the transmission axes of the polarizers if it is desired that one-tenth of the incident intensity be transmitted, ∝ = 63.435°

We'll assume that [tex]I_{0}[/tex] represents the incident light's intensity. Two polarizers are provided to us, but the first polarizer's angle is not disclosed. The incident light in situations like this needs to be unpolarized. This is due to the fact that, regardless of angle, the transmitted intensity via the polarizer is reduced by half for unpolarized light:

[tex]I_{1} =\frac{1}{2} I_{0}[/tex]

Then,

[tex]I_{2} =\frac{1}{10} I_{0}[/tex]

By using Malu's law,

[tex]I_{2} =I_{1} cos^{2} \alpha[/tex]

That is,

[tex]cos^{2} \alpha = \frac{I_{2} }{I_{1} }[/tex]

In terms of [tex]I_{0}[/tex], we get

[tex]cos^{2} \alpha =\frac{0.1I_{0} }{0.5I_{0} }[/tex]

[tex]cos^{2} \alpha = 0.2[/tex]

Now the angle is,

[tex]cos\alpha =\sqrt{0.2}[/tex]

cos ∝ = 0.44721

[tex]\alpha =cos^{-1} (0.44721)[/tex]

Then, ∝ = 63.435°

This angle is measured with respect to the first polarizer angle.

Learn more about the polarizers here: https://brainly.com/question/13008007

#SPJ4

17.90 KJ of energy must be added to 69. 0 grams of water to change the temperature from 33°C to 95°C

Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree. The units of specific heat are usually calories or joules per gram per Celsius degree.

Heat added = H = mc(ΔT )

where,

H = heat

m = mass of water = 69 g

c = specific heat of water = 4.184 J/g/°C

ΔT = change in temperature

H = 69 * 4.184 * ( 95 - 33 )

H   = 17899.152 J

     = 17.90 KJ

To learn more about specific heat here

https://brainly.com/question/21041726

#SPJ4

A current of 0. 82A flows through a light bulb. The charge passed through the light bulb during 94 s is 77.08C

The amount of charge flown for a given period of time determines the current passed through a bulb or electrical body.

The relation between the charge, current and time is given as:

Q = I × t

where, Q is the charge flown through bulb

I is the current passed through bulb

t is the time for which charge passes through bulb

Given,

I = 0.82A

t = 94s

Q = ?

Substituting the values in the above formula:

Q = I × t

Q = 0.82 × 94

Q = 77.08C

Hence, The charge passed through the light bulb during 94 s is 77.08C

Learn more about Current here, https://brainly.com/question/2264542

#SPJ4

The five questions that I would like to be answered concerning human involvement in climate change would be disclosed below.

Climate change is defined as the change that affects the normal atmospheric patterns which is often related to the activities of the human and their environment.

The five questions that I would like to be answered concerning human involvement in climate change include the following:

From the definition, climate changes with respect to the activities of human beings. Such activities include the following:

Learn more about climate change here:

https://brainly.com/question/1789619

#SPJ1

Answer:

Book. Bottle. table are some examples of objects in equilibrium found in classroom

Answer:

if a car is increasing it's acceleration uniformly in a unit time, the graph will be moving away from it's origin. that's how you get this kind of graph.

Centimeter is the right answer.

When a student performs an experiment and must measure the lengths of four different objects: a textbook, a pencil, a cup, and a piece of bread, centimeter would be the most appropriate unit of measurement for her to use.

The other units are either too small or too big to use for the measurement of the given objects.

On considering kilometer we usually use the kilometer unit of measurement for the measurement of distance.

Considering meter, we can tell that 1 meter = 100 centimeters which is also more when measuring the above given objects.

Micrometer is very small to measure the above mentioned objects.

The micrometer is a commonly used unit of measurement for infrared radiation wavelengths, bacterial and biological cell sizes, and for classifying wool according to the diameter of the fibers.

So hence on comparing all the units we can conclude that centimeter is the appropriate unit of measurement to measure  a textbook, a pencil, a cup, and a piece of paper.

To learn more about units of measurement visit:

https://brainly.com/question/1125408

#SPJ4

The rms current in the transmission lines is I = 487.18 A.

The root-imply-rectangular (rms) voltage of a sinusoidal supply of electromotive force  is used to represent the source. it is the rectangular root of the time average of the voltage squared.

Alternating-present day circuits. the root-imply-square (rms) voltage of a sinusoidal source of electromotive force is used to symbolize the supply. it's far the square root of the time average of the voltage squared.

Electric power is  by using present day or the waft of electric fee and voltage or the capacity of rate to deliver electricity. A given cost of power can be produced by using any combination of contemporary and voltage values

power = 38 M watt

rms voltage = 78 K v

power = IV

I = power/V

I = (38 * 1000000)/78*1000

I = 487.18 A.

Learn more about rms current here:-https://brainly.com/question/20913680

#SPJ4

From the core concept introduced by Al-Haytham, modern cameras are created.

To find the answer, we have to know about the Camera Obscura.

Thus, we can conclude that, from the core concept introduced by Al-Haytham, modern cameras are created.

Learn more about the Camera Obscura here:

https://brainly.com/question/9486867

#SPJ1