The mayor's conclusion that the economic policy prescription of taxing goods with inelastic demand is flawed based on the city's experience with the gas tax increase is premature and misguided.
While it is true that goods with inelastic demand are typically considered suitable for taxation due to the expectation of higher tax revenues, other factors may have influenced the outcome.Firstly, the magnitude of the tax increase matters. If the gas tax was raised too significantly, it could have led to a substantial decrease in demand, offsetting the potential revenue gains from the tax. Consumers may have responded by reducing their gasoline consumption or seeking alternative modes of transportation.Secondly, cross-border shopping or fuel smuggling could have played a role. If neighboring regions or jurisdictions had lower gas tax rates, consumers might have chosen to purchase economic policy those areas, leading to a decrease in local sales and tax revenue.Lastly, long-term effects and behavioral changes need to be considered. Higher gas prices could incentivize consumers to invest in more fuel-efficient vehicles, switch to public transportation, or adopt alternative energy sources. These changes could reduce the overall demand for gasoline, again impacting tax revenues.
To learn more about economic policy,visit here
https://brainly.com/question/30104789
#SPJ11
When a company declares a cash dividend, retained earnings is decreased by the amount of the dividend on the date of: Declaration Payment Commencement Record
When a company declares a cash dividend, the retained earnings are decreased on the date of payment.
Explanation: Retained earnings represent the cumulative profits earned by a company that have not been distributed to shareholders as dividends. When a company decides to declare a cash dividend, it is a distribution of a portion of the company's earnings to its shareholders. However, the actual decrease in retained earnings occurs on the date of payment, not the date of declaration or any other stage of the dividend process.
The declaration date is when the company's board of directors announces its intention to pay a dividend. At this stage, a liability is created, known as "dividends payable," but it does not impact the retained earnings. The commencement date refers to the date when the company officially starts the process of paying the dividend, such as sending out dividend checks or initiating electronic transfers. Again, this stage does not affect the retained earnings.
It is on the payment date that the company distributes the dividend to its shareholders. At this point, the cash is transferred from the company's accounts to the shareholders, and the retained earnings are reduced by the amount of the dividend paid. The reduction in retained earnings reflects the fact that a portion of the company's profits has been distributed to its owners. The record date, on the other hand, is the date on which the company determines the shareholders who are entitled to receive the dividend, but it does not directly impact the retained earnings.
Learn more about dividend here: brainly.com/question/30030205
#SPJ11
contracts that are executory on both sides can be rescinded by agreement.
Executory contracts can be rescinded by an agreement executed between both parties involved.
A contract is a legal document that outlines the rights and obligations of two or more parties.
An executory contract is a contract in which one or both parties have yet to complete their obligations.
In a contract that is executory on both sides, both parties still have duties to perform. This is the opposite of an executed contract, in which all duties have been fulfilled.
When a contract is rescinded, it is cancelled or terminated before it is fully executed. The parties agree to go back to their original positions and forget about the contract. A rescinded contract is treated as if it never existed. When a contract is rescinded, each party is relieved of their contractual obligations, and they return to the status quo before the contract was signed. It is important to note that the rescission must be done by mutual agreement of both parties.
Therefore, if both parties agree, the contract that is executory on both sides can be rescinded by mutual agreement.
Learn more about executory contract: https://brainly.com/question/14838299
#SPJ11
a. Why are taxes, one traditional remedy for negative externalities, less than ideal for smoking cessation in the United States? Nicotine is addictive/demand is inelastic, and smokers are mostly poor, so in effect cigarette taxes reduce the quality of life of people we’re trying to help without substantially reducing smoking
b. Demand is inelastic, and smokers are mostly rich, so they don’t reduce smoking as a result of taxes
c. Demand is elastic, and smokers are mostly old, so taxes reduce smoking but cause increased anxiety among the elderly
d. Demand is elastic, and smokers are mostly young, so they quit smoking but are then more likely to experiment with illegal drugs
"Nicotine is addictive/demand is inelastic, and smokers are mostly poor, so in effect cigarette taxes reduce the quality of life of people we’re trying to help without substantially reducing smoking" is the reason why taxes less than ideal for smoking cessation in the United States. Option A is correct.
Taxes are often used as a means to address negative externalities, such as smoking, by increasing the cost of the activity. However, in the case of smoking cessation in the United States, this approach has limitations. Nicotine, the addictive component of cigarettes, creates a strong dependence, resulting in inelastic demand for cigarettes.
Additionally, research indicates that a significant proportion of smokers come from low-income backgrounds. When cigarette taxes are imposed, they disproportionately burden these individuals, reducing their quality of life without substantially curbing smoking rates. This approach fails to effectively address the issue and may exacerbate inequalities, making it less than ideal as a remedy for smoking cessation.
Option A holds true.
Learn more about cigarette taxes: https://brainly.com/question/30570523
#SPJ11
An investment will pay $150 at the end of each of the next 3 years, $300 at the end of Year 4, $350 at the end of Year 5, and $500 at the end of Year 6. If other investments of equal risk earn 6% annually, what is this investment's present value? Its future value? Do not round intermediate calculations. Round your answers to the nearest cent.
Present value: $
Future value: $
The investment's present value is $1,352.06, and its future value is $1,600.
To calculate the present value of the investment, we need to discount each cash flow to its present value and sum them up. Since other investments of equal risk earn 6% annually, we'll use a discount rate of 6% for our calculations.
The present value (PV) of each cash flow can be calculated using the formula:
PV = CF / (1 + r)^n
Where PV is the present value, CF is the cash flow, r is the discount rate, and n is the number of years.
For the cash flows given:
- The $150 cash flows at the end of each of the next 3 years have the following present values: PV1 = 150 / (1 + 0.06)^1, PV2 = 150 / (1 + 0.06)^2, PV3 = 150 / (1 + 0.06)^3.
- The $300 cash flow at the end of Year 4 has a present value: PV4 = 300 / (1 + 0.06)^4.
- The $350 cash flow at the end of Year 5 has a present value: PV5 = 350 / (1 + 0.06)^5.
- The $500 cash flow at the end of Year 6 has a present value: PV6 = 500 / (1 + 0.06)^6.
To find the present value of the investment, we sum up all these present values:
Present value = PV1 + PV2 + PV3 + PV4 + PV5 + PV6
Now, to calculate the future value of the investment, we don't need to discount the cash flows. We simply sum them up:
Future value = $150 + $150 + $150 + $300 + $350 + $500
Performing the calculations:
PV1 = 150 / (1 + 0.06)^1 = $141.51
PV2 = 150 / (1 + 0.06)^2 = $133.39
PV3 = 150 / (1 + 0.06)^3 = $125.66
PV4 = 300 / (1 + 0.06)^4 = $255.52
PV5 = 350 / (1 + 0.06)^5 = $280.44
PV6 = 500 / (1 + 0.06)^6 = $415.54
Present value = $141.51 + $133.39 + $125.66 + $255.52 + $280.44 + $415.54 = $1,352.06 (rounded to the nearest cent)
Future value = $150 + $150 + $150 + $300 + $350 + $500 = $1,600
Therefore, the investment's present value is $1,352.06, and its future value is $1,600.
Learn more about investment's here:
https://brainly.com/question/15105766
#SPJ11
A Company has a capital structure that currently consists of 60% common equity, 30% long-term debt and 10% preferred shares. This capital structure is believed to be optimal.The internal required return is 5%. New common stock can be issued at a cost of 7%. Beyond 300 euros of debt, the pre-tax cost of long-term debt raises from 11% to 12%.The company's marginal tax rate is 40%. Preferred shares can be issued to infinity at a cost of 15%. when calculating the WACC (weighted average cost of capital), the breakpoints are 750 euros and 1,000 euros. Calculate the amount of retained earnings.
To calculate the amount of retained earnings, we need to determine the weightings and costs of each component of the company's capital structure and apply them to the WACC formula.
WACC = (Weight of common equity * Cost of common equity) + (Weight of long-term debt * Cost of long-term debt) + (Weight of preferred shares * Cost of preferred shares)WACC = (Weight of common equity * Cost of common equity) + (Weight of long-term debt * Cost of long-term debt) + (Weight of preferred shares * Cost of preferred shares)Since the capital structure is believed to be optimal, we can assume that the WACC remains constant between the breakpoints. Since the retention ratio is negative, indicating that the company is not retaining earnings, the amount of retained earnings would be zero.
learn more about component here:
https://brainly.com/question/32278675
#SPJ11
Sketch a plot for a European put option at expiry, assuming the final value of the share is always $30, as a function of the strike price which varies between $0 and $80
The plot for a European put option at expiry, assuming a constant final share value of $30, as a function of the strike price ranging from $0 to $80, would display a convex shape.
As the strike price increases from $0, the value of the put option decreases, as it becomes less attractive to exercise the option to sell the shares at a lower price. Thus, the value of the put option would initially decline as the strike price rises.
However, as the strike price approaches the final share value of $30, the value of the put option starts to increase significantly. This is because the put option becomes more valuable as the difference between the final share value and the strike price widens. Consequently, the plot would exhibit an upward slope towards the right, indicating a higher value for the put option as the strike price gets closer to or exceeds the final share value. The shape of the plot would resemble an inverted "V" or a concave curve, with a low value at low strike prices and a high value at high strike prices.
Learn more about strike price here;
brainly.com/question/15682316
#SPJ11
What damages are designed to restore the claimant to pre-injury status? A. General damages. B. Punitive damages. C. Noneconomic damages. D. Compensatory damages.
Compensatory damages are designed to restore the claimant to pre-injury status. The answer is option D.
Compensatory damages are a type of legal remedy intended to restore the claimant to their pre-injury condition. This means that the victim is awarded money to cover the losses they suffered as a result of the injury. Compensatory damages are typically classified into two categories: economic and non-economic damages.
Economic damages are quantifiable losses that are easy to quantify, such as medical bills, lost wages, and property damage. Non-economic damages, on the other hand, are more difficult to quantify and refer to things like pain and suffering, emotional distress, and loss of enjoyment of life.In general, compensatory damages are intended to restore the victim to their pre-injury condition by awarding them enough money to cover the losses they incurred as a result of the injury. These damages are not intended to punish the defendant or deter others from engaging in similar behavior, unlike punitive damages.
Learn more about Compensatory damages at:
https://brainly.com/question/31935236
#SPJ11
When looking at materials inventory, we believe that it includes
A. Direct Materials only
B. Indirect Materials only
C. Both Direct Materials and Indirect Materials
D. None of them are right
When looking at materials inventory, we believe that it includes Both Direct Materials and Indirect Materials.
What is Material Inventory?
Material inventory can be defined as a part of inventory management that is mainly concerned with overseeing the flow of materials from manufacturers to warehouses and finally to point of sale.
This part of inventory management focuses on the materials required to create a finished product, the quantity of the material that should be stocked, and the duration of the lead time, among other factors.
The raw materials and components that a company acquires to create a finished product are referred to as direct materials.
Indirect materials, on the other hand, are materials that are not directly associated with the end product.
Office supplies, cleaning supplies, and factory equipment fall under this category.
In the case of inventory management, when looking at materials inventory, we believe that it includes both direct materials and indirect materials.
A direct material is a raw material or a component that goes into a final product.
Direct materials are usually included in a company's inventory to ensure that production lines keep running smoothly.
Indirect materials are items that are not a part of a final product but are required for the production process.
Office supplies, cleaning supplies, and factory equipment fall under this category.
The cost of indirect materials is charged to the cost of goods sold directly or to a manufacturing overhead account.
The cost of the direct material inventory is the cost of all the direct materials that are in inventory at a specific point in time.
A business determines the value of direct materials inventory by multiplying the total quantity of items in inventory by the cost per item.
If a company has 150 units of direct material in inventory and the cost per unit is $5, the value of direct material inventory will be $750 (150 * $5).
Learn more about materials inventory from this link:
https://brainly.com/question/30790932
#SPJ11
Pam and 12 of her coworkers were fired by Asteroid enterprises after signing union authorization forms. They claim that asteroids actions was anti-union and thus constituted an unfair labor practice. Is this action proper? Explain.
No, it is not proper for Asteroid Enterprises to fire Pam and her coworkers after they signed union authorization forms. Firing employees for engaging in union activity is an unfair labor practice.
The National Labor Relations Act (NLRA) protects employees' right to organize and join unions, and firing employees for engaging in union activity is an unfair labor practice.
The NLRA defines "protected concerted activity" as "any concerted activity for mutual aid or protection." This includes activities such as discussing unionization with coworkers, signing union authorization cards, and attending union meetings. Firing employees for engaging in protected concerted activity is a violation of the NLRA.
In the case of Pam and her coworkers, they were engaging in protected concerted activity when they signed union authorization forms. By firing them, Asteroid Enterprises was retaliating against them for exercising their right to organize. This is a clear violation of the NLRA.
To learn more about coworkers: https://brainly.com/question/15086062
#SPJ11
A mutual fund "load" refers to
a the sum of the commissions paid for buying and selling the assets of the fund
b the sales commission paid to brokers.
c the operating expenses charged against the assets.
d the fees paid to the imvestment manager.
A mutual fund "load" refers to the sales commission paid to brokers. So, correct option is B.
It represents a charge or fee imposed on investors for buying or selling shares of a mutual fund. The load can be either a front-end load or a back-end load.
Front-end Load: If a mutual fund has a front-end load, investors are charged a percentage of their investment at the time of purchase. For example, if the front-end load is 5% and an investor invests $10,000, $500 will be deducted as a sales commission, and the remaining $9,500 will be used to purchase shares of the mutual fund.
Back-end Load: In the case of a back-end load, the sales commission is charged when the investor sells their shares. The fee is typically a percentage of the value of the shares being sold and may vary depending on the length of time the investor held the shares.
It's important for investors to understand the load structure of a mutual fund as it affects the overall returns. Some mutual funds may have a "no-load" option, which means they do not charge a sales commission, allowing investors to buy or sell shares without incurring additional fees.
So, correct option is B.
To learn more about mutual fund "load" click on,
https://brainly.com/question/14813463
#SPJ4
Exercise 24-20A (Algo) IRR for investment using Excel LO P4 Optitux is considering investing in an automated manufacturing sytem. The system requires an initial investment of 56.0 millior, has a 20 -year life, and will have zero salvage value. If the system is implemented, the company will save $740,000 per year in direct labor costs. The company requlres a 10% return from its investments. Using Excel, compute the internal rate of return for the proposed investment. (Round your answer to 2 decimal places.)
The internal rate of return (IRR) for the investment in the automated manufacturing system using Excel is 9.69%.
To calculate the IRR, we can set up a cash flow schedule in Excel. The initial investment of $56.0 million is considered a negative cash flow. For the next 20 years, there will be an annual cash inflow of $740,000 due to the savings in direct labor costs.
Using the IRR function in Excel, we can input the cash flows as follows:
- Cell A1: -56000000 (initial investment)
- Cells A2 to A21: 740000 (annual savings)
In a separate cell, let's say B1, we can use the formula "=IRR(A1:A21)" to calculate the internal rate of return. The result will be 9.69% (rounded to 2 decimal places).
The IRR represents the discount rate at which the present value of future cash flows equals the initial investment. In this case, the proposed investment in the automated manufacturing system would yield a return of approximately 9.69%, meeting the company's requirement of a 10% return.
Learn more about investment here:
https://brainly.com/question/15105766
#SPJ11
A factory produces 40 plastic chairs per day with a total of 5 workers working & hours per
day at a pay rate of $5 per hour. The costs of raw material, electricity material handling per
day are $40, $10 and $15, respectively. Calculate:
a-
The labor productivity (one factor productivity)
B-
Multi-factor productivity
a- The labor productivity (one-factor productivity) is 0.2.
b- The multi-factor productivity is approximately 0.151
a) Labor productivity (one-factor productivity) can be calculated by dividing the output (number of plastic chairs produced) by the input (labor cost).
Output: 40 plastic chairs per day
Input: Labor cost = number of workers * hours worked per day * pay rate
Number of workers = 5
Hours worked per day = 8
Pay rate = $5 per hour
Output = 40 plastic chairs per day
Input = 5 workers * 8 hours per day * $5 per hour
Input = $200 per day
Labor productivity = Output / Input
Labor productivity = 40 / 200
Labor productivity = 0.2
The labor productivity (one-factor productivity) is 0.2, which means that the factory produces 0.2 plastic chairs per dollar spent on labor.
b) Multi-factor productivity can be calculated by dividing the output (number of plastic chairs produced) by the sum of all inputs (labor cost, cost of raw material, electricity cost, and material handling cost).
Output: 40 plastic chairs per day
Inputs: Labor cost, raw material cost, electricity cost, and material handling cost
Labor cost = $5 per hour * 5 workers * 8 hours per day = $200 per day
Raw material cost = $40 per day
Electricity cost = $10 per day
Material handling cost = $15 per day
Total input = Labor cost + Raw material cost + Electricity cost + Material handling cost
Total input = $200 + $40 + $10 + $15
Total input = $265 per day
Multi-factor productivity = Output / Total input
Multi-factor productivity= 40 / 265
Multi-factor productivity≈ 0.151
The multi-factor productivity is approximately 0.151, indicating that the factory produces 0.151 plastic chairs per dollar spent on all inputs (labor, raw material, electricity, and material handling).
To know more about productivity visit:
https://brainly.com/question/2992817
#SPJ11
A town in northern Colorado is planning on investing in a water purification system. Three mutually exclusive systems have been proposed, and their capital investment costs and net annual benefits are the following values (Salvage values are provided in the table). If the town's MARR is 15% per year use the Incremental Benefit Cost ratio method to determine which system is the best. Draw cash flow diagrams for each alternative as well as incremental scenarios before calculating Incremental Benefit Cost ratio.
To determine the best water purification system, the Incremental Benefit Cost ratio method is used. By comparing the incremental net annual benefits to the incremental capital investment costs, the system with the highest ratio is chosen.
Cash flow diagrams are drawn for each alternative and the incremental scenarios are analyzed before calculating the Incremental Benefit Cost ratio. The Incremental Benefit Cost ratio method involves comparing the incremental net annual benefits to the incremental capital investment costs for each alternative. The incremental net annual benefits are calculated by subtracting the net annual benefits of the current alternative from the net annual benefits of the previous alternative. The incremental capital investment costs are calculated similarly.
To determine the best system, draw cash flow diagrams for each alternative, indicating the initial investment costs, salvage values, and net annual benefits for each year. Calculate the incremental net annual benefits and incremental capital investment costs for each alternative. Next, calculate the Incremental Benefit Cost ratio by dividing the incremental net annual benefits by the incremental capital investment costs. The system with the highest ratio is considered the best option. By applying the Incremental Benefit Cost ratio method and analyzing the cash flow diagrams, the town in northern Colorado can identify the system that provides the highest incremental benefits relative to its incremental costs, considering the MARR of 15% per year.
Learn more about investment here
https://brainly.com/question/14921083
#SPJ11
Preference shareholders _____ a fixed maturity date and have a _____ ranking than common equity when it comes to claiming dividends and assets.
Group of answer choices
a) do not have, lower
b) do not have, higher
c) have, higher
d) have, lower
Preference shareholders have a fixed maturity date and a higher ranking than common equity when it comes to claiming dividends and assets.
Preference shares are a type of equity security that combines characteristics of both equity and debt. They are called "preference" shares because they have preferential rights over common equity shareholders in terms of dividend payments and asset distribution.
Preference shareholders have a fixed maturity date, which means that at a specified future date, the shares will be redeemed or converted into cash. This provides a level of certainty regarding the return of capital to preference shareholders.
When it comes to claiming dividends, preference shareholders have a higher priority compared to common equity shareholders. Preference shareholders are entitled to receive dividends before common equity shareholders, and if there are insufficient profits to pay dividends to both preference and common equity shareholders, preference shareholders must be paid their dividends in full before any dividends are distributed to common equity shareholders.
In the event of liquidation or bankruptcy, preference shareholders also have a higher claim on the company's assets compared to common equity shareholders. If there are remaining assets after paying off the company's debts and obligations, preference shareholders will be entitled to receive their capital back before any distribution is made to common equity shareholders.
Therefore, preference shareholders have a fixed maturity date and a higher ranking when it comes to claiming dividends and assets, making option c) the correct choice.
Learn more about Preference shareholders here
https://brainly.com/question/29980087
#SPJ4
How do you make most of your in person payments? (Cash, credit, debit, mobile payments, etc.) Why do you usually pick that method?
What are your thoughts on cryptocurrencies (e.g., bitcoin, litecoin, dogecoin, etc.)? Have you owned or used cryptocurrencies?
In the chapter, we learned that commercial banks create money from deposits and loans. There are some that have argued banks should be forced to hold 100% reserves (called a full reserve system) and not make loans, so that money is no created from these banks. What would be some pros and cons of such a policy?
In-person payment methods: The choice of payment method varies among individuals. Common methods include cash, credit cards, debit cards, and mobile payments.
The selection depends on factors such as convenience, security, acceptance by merchants, rewards, and personal preference. Credit and debit cards offer ease of use and convenience, while mobile payments provide a contactless and digital option. Cash is still widely used for small transactions and in situations where other payment methods are not available or preferred.Cryptocurrencies: Cryptocurrencies, such as Bitcoin, Litecoin, and Dogecoin, are digital or virtual currencies that use cryptography for security. People have different opinions about cryptocurrencies. Supporters argue that they offer decentralized transactions, potential for financial inclusion, and protection against inflation. Critics express concerns about price volatility, regulatory challenges, potential for illegal activities, and environmental impact due to energy consumption in cryptocurrency mining. Ownership and usage of cryptocurrencies vary among individuals based on their interest, knowledge, and risk tolerance.
To learn more about payment methods:
https://brainly.com/question/31755983
#SPJ11
James was an ordinary salesman for ABC Paper Products, but the business card provided to him read "Territory Manager." He had no authority to sell his company's products for a reduced price, yet he told a potential customer, "I'll give you a 10 percent reduction if you place an order today." If the customer wants to enforce the reduced price after signing the contract, what legal concepts should be argued?
The legal concepts that should be argued in this situation are misrepresentation and the doctrine of apparent authority.
Misrepresentation refers to the act of making false statements or presenting misleading information with the intention of inducing someone to enter into a contract. In this case, James misrepresented his authority by offering a discount he wasn't authorized to provide. As a result, the customer may argue that they were misled and seek enforcement of the promised reduced price.
Additionally, the doctrine of apparent authority could come into play. This doctrine holds that a person or company can be bound by the actions or statements of an individual who appears to have authority, even if they don't actually possess it. If James's business card described him as a "Territory Manager," it created the appearance of authority to offer discounts. The customer may argue that they reasonably relied on this apparent authority when signing the contract, and therefore, the reduced price should be enforced.
In conclusion, the legal concepts that should be argued in this scenario are misrepresentation and the doctrine of apparent authority. Misrepresentation relates to the false statement made by James regarding the discount, while the doctrine of apparent authority considers the customer's reasonable reliance on James's apparent authority as a Territory Manager. It is essential to consult a legal professional to fully understand the specific legal implications and strategies that should be pursued in this situation.
Learn more about apparent authority here:
https://brainly.com/question/32948894
#SPJ11
This will be a graph shifting question, which asks about the intuition of both the AD-AS figures and the I-NS figures, specifically relating them to long-term growth.
When we consider the equation for National Savings (NS) from lecture and our model, would an increase in Real GDP lead to an increase, decrease, or no change in the quantity of National Savings supplied? Explain your answer.
Suppose that the economy uses (only) two major inputs in its production: capital (K) and labour (L). Suppose also that we are thinking about long-term growth, specifically through productivity growth.
Using the AD-AS model we have been working with, what would you expect to happen to equilibrium γ∗ and p∗ in the economy over the long-run as this productivity growth continues to occur? Assume that the government takes no action in this case and so that the economy adjusts naturally. Explain your answer using explanations and also the AD-AS figures.
Suppose that the government is concerned about keeping pace with this long-term growth and ensuring that it maintains a stable price level in its long-term equilibrium. Therefore, it does act and decides to keep increasing the autonomous demand for investment in order to try and maintain a constant price level in the face of this productivity growth.
Does the AD-AS model predict that this strategy could be effective? What would we expect to happen to both p* and the equilibrium interest rates in this example? Explain your answer.
Finally, consider if this increase in investment as a result of government policy might have a further effect on long-term growth. Assume that this investment is used completely on capital accumulation-i.e. increasing the capital stock in the economy. Suppose that the production function in this economy instead exhibits both (i) increasing returns and (ii) constant returns to scale, as in lecture.
Notice that the production function of this economy exhibited not diminishing returns, but rather increasing returns, which means that for each additional unit of capital (ceteris paribus), the marginal product of capital is increasing. Would this capital 1 accumulation be a sustainable source of long-term growth in both GDP and GDP per capita? Why or why not? Explain your answer.
In the AD-AS model, an increase in Real GDP would lead to an increase in the quantity of National Savings supplied. This is because as Real GDP increases, households and businesses tend to save a larger portion of their income, resulting in an increase in National Savings.
Over the long run, with continued productivity growth, the equilibrium γ∗ (output gap) in the economy would decrease towards zero, indicating that the economy is operating at its potential output level.
The price level p∗ would also increase due to the increase in productivity, reflecting higher costs and prices.
If the government increases autonomous demand for investment to maintain a constant price level, the AD-AS model predicts that this strategy may be effective in the short run.
In the short run, it can help stabilize prices by increasing aggregate demand. However, in the long run, as productivity growth continues, the price level is likely to increase regardless of government intervention.
Increased investment resulting from government policy, specifically capital accumulation, can contribute to long-term growth in GDP and GDP per capita.
In an economy with increasing returns to scale, each additional unit of capital would lead to an increasing marginal product, resulting in higher output and productivity.
Therefore, capital accumulation would be a sustainable source of long-term growth, as it enhances the economy's productive capacity and leads to higher levels of GDP and GDP per capita over time.
To learn more about, National savings:-
brainly.com/question/14521802
#SPJ11
As a part of the quality improvement initiative, United Technologies employees must complete a four-day training program on team building and a three-day training program on problem solving. The manager has requested that at least 8 training programs on team building and at least 10 training programs on problem solving be offered during the next six months.
In addition, senior-level management has specified that at least 25 training programs must be offered during this period. United Technologies uses a consultant to teach the training programs. During the next 6 months, the consultant has 84 days of training time available. Each training program on team building costs $8,000 and each training program on problem solving costs $6,000.
(a) Formulate a linear programming model that can be used to determine the number of training programs on team building and the number of training programs on problem solving that should be offered in order to minimize total cost.
In 12-A(a), suppose the following changes are made.
United Technologies (UT) must offer a 3-day training program on time management, at the cost of $5,000 each, in addition to the two programs mentioned in the problem.
It must offer at least 16 of time management programs during the next 6 months.
With the addition of the time management training program, the total number of training programs must now be at least 30 (instead of 25).
Fortunately, UT was able to hire one additional consultant who has 84 days available, effectively doubling the total available training time
Write down only the 2 new constraints expressing #3 about the total number of training programs and #4 about the total available training time. Do not write any other constraints here. Use the variables:
T = number of training programs on teaming
P = number of training programs on problem solving
M = number of training programs on time management
To incorporate the additional time, United Technologies must ensure that the total number of training programs offered is at least 30, and the total available training time does not exceed 168 days.
The two new constraints for the total number of training programs and total available training time can be expressed as follows:
3. Total Number of Training Programs:
T + P + M ≥ 30
This constraint ensures that the total number of training programs, including team building (T), problem solving (P), and time management (M), is at least 30 as specified by senior-level management.
4. Total Available Training Time:
3T + 4P + 3M ≤ 168
Since the consultant has 84 days of training time available, and each team building program takes 3 days, each problem-solving program takes 4 days, and each time management program takes 3 days, this constraint ensures that the total training time required for all programs does not exceed the available 168 days.
Therefore, In addition to the existing training programs on team building and problem solving, United Technologies must offer a 3-day training program on time management. At least 16 time management programs must be offered, and the total number of training programs must be at least 30. With an additional consultant hired, doubling the available training time to 168 days, these constraints ensure the inclusion of time management training while maintaining the minimum program requirements.
To know more about time management click here: brainly.com/question/29670321
#SPJ11
What are determinants of market interest rates? Check all that apply: Inflation premium Risk premium Demand premium Real rate of interest
The determinants of market interest rates include the following terms: Inflation premium Risk premium Demand premium Real rate of interest Interest rates are primarily determined by the interplay of supply and demand for credit.
However, several factors can affect the overall market interest rates, and these factors are called determinants. These determinants of market interest rates are: Inflation premium: The expected future rate of inflation is factored into the interest rate that lenders charge. The inflation premium compensates the lender for the loss of purchasing power that could occur if the money is loaned out for a long period.
Risk premium: Lenders factor in the borrower's perceived risk of default into the interest rate. The higher the perceived risk, the higher the rate of interest demanded by the lender. Demand premium: The demand for loans also plays a role in the interest rate charged by lenders.
When the demand for loans is high, interest rates tend to increase to compensate for the competition between borrowers for the limited funds available. Real rate of interest: This represents the cost of borrowing without factoring in inflation. The real interest rate is typically lower than the nominal rate, which includes inflation expectations and risk premiums.
Learn more about market interest rates Here.
https://brainly.com/question/28147772
#SPJ11
Identify and explain the two main bases for segmental reporting
that for many years were required by financial reporting standards
in this area. Discuss the advantages and disadvantages of each
basis.
The two main bases for segmental reporting were the geographical basis and the business segment basis.
1. Geographical Basis: This basis divides the company's operations based on different geographic regions. It provides information about the company's performance in different countries or regions. The advantages of the geographical basis include facilitating analysis of performance in specific markets, enabling comparison of operations across regions, and providing insights into foreign exchange risks. However, it may overlook differences in operations within a geographic region and fail to capture the underlying business segments' performance.
2. Business Segment Basis: This basis divides the company's operations based on different business segments or product lines. It provides information about the company's performance in distinct areas of its operations. The advantages of the business segment basis include a better understanding of the profitability and risks associated with different segments, facilitating resource allocation decisions, and aiding in strategic planning. However, it may require subjective judgments in determining segment boundaries and may not adequately capture cross-segment synergies or interdependencies.
Overall, both bases have their advantages and disadvantages, and the choice between them depends on the nature and complexity of the company's operations and the information needs of users of financial statements.
learn more about business segment here:
https://brainly.com/question/33443808
#SPJ11
Explain in detail, the shape of the individual supply of labor
curve. Illustrate your answer with the aid of a diagram. (10)
The individual supply of labor curve shows the relationship between the wage rate and the quantity of labor supplied by an individual worker.
The curve is upward sloping, indicating that as the wage rate increases, the quantity of labor supplied by an individual worker also increases. The shape of the individual supply of labor curve is determined by several factors, including:
The opportunity cost of leisure time: As the wage rate increases, the opportunity cost of leisure time increases, which makes it more attractive for individuals to work and earn more money.
The income effect: As the wage rate increases, individuals may choose to work fewer hours because they can afford to maintain their desired standard of living with less work.
The substitution effect: As the wage rate increases, individuals may choose to work more hours because the opportunity cost of leisure time has increased relative to the wage rate.
The individual supply of labor curve is typically upward sloping, but there are some exceptions. For example, the backward-bending supply curve of labor occurs when an even higher wage actually entices people to work less and consume more leisure or unpaid time.
The quantity of labor supplied increases as the wage rate increases. This is because as the wage rate increases, the opportunity cost of leisure time increases, making it more attractive for individuals to work and earn more money.
In summary, the individual supply of labor curve is upward sloping, indicating that as the wage rate increases, the quantity of labor supplied by an individual worker also increases. The shape of the curve is determined by factors such as the opportunity cost of leisure time, the income effect, and the substitution effect.
learn more about substitution effect here:
https://brainly.com/question/31245999
#SPJ11
A. li consulting co.'s adjusted trial balance shows the drawing account has a debit balance of $2,000. the journal entry to close this account will include which of the following entries:
The given situation is that li consulting co.'s adjusted trial balance shows the drawing account has a debit balance of $2,000. The journal entry to close this account will include the following entries:
Debit Drawing account with $2,000 Credit Owner’s capital account with $2,000Explanation:The capital account is debited because the drawings decrease the owner’s capital in the business. The opposite will happen if the owner contributes funds to the business, and the capital account will be credited to reflect an increase in the owner’s capital investment in the business.
To know more about business: https://brainly.com/question/18307610
#SPJ11
Baker Industries' net income is \( \$ 24,000 \), its interest expense is \( \$ 4,000 \), and its tax rate is \( 25 \% \). Its notes payable equals \( \$ 25,000 \), longterm debt equals \( \$ 75,000 \)
To determine the Return on Equity for Baker Industries, given that its net income is $24,000, interest expense is $4,000, tax rate is 25%, notes payable equals $25,000, and long term debt equals $75,000, we need to calculate the total liabilities and stockholder’s equity of the company.
The formula for Return on Equity is as follows:Return on Equity = Net Income / (Total Liabilities + Stockholder's Equity)Let's calculate the total liabilities first.Total Liabilities = Notes Payable + Long-term DebtTotal Liabilities = $25,000 + $75,000Total Liabilities = $100,000 Next, let's calculate the Stockholder's Equity using the below formula:Stockholder's Equity = Assets – Liabilities Stockholder's Equity = (Net Income – Interest Expense) / Tax RateStockholder's Equity = ($24,000 - $4,000) / 25%Stockholder's Equity = $20,000 / 0.25Stockholder's Equity = $80,000
Now that we have calculated both Total Liabilities and Stockholder's Equity, we can calculate Return on Equity as:Return on Equity = Net Income / (Total Liabilities + Stockholder's Equity)Return on Equity = $24,000 / ($100,000 + $80,000)Return on Equity = $24,000 / $180,000Return on Equity = 0.133 or 13.3%
Therefore, the Return on Equity for Baker Industries is 13.3%.
To know more about Industries visit
https://brainly.com/question/33499989
#SPJ11
Laser Impressions, Inc., manufactures color laser printers. Model J20 presently sells for $275 and has a total product cost of $220, as follows:
Direct materials $160
Direct labor 40
Factory overhead 20
Total $220
It is estimated that the competitive selling price for color laser printers of this type will drop to $260 next year. Laser Impressions has established a target cost to maintain its historical markup percentage on product cost. Engineers have provided the following cost-reduction ideas:
-Purchase a plastic printer cover with snap-on assembly, rather than with screws. This will reduce the amount of direct labor by 9 minutes per unit.
-Add an inspection step that will add six minutes per unit of direct labor but reduce the materials cost by $6 per unit.
-Decrease the cycle time of the injection molding machine from four minutes to three minutes per part. Thirty percent of the direct labor and 45% of the factory overhead are related to running injection molding machines.
The direct labor rate is $17 per hour.
a. Determine the target cost for Model J20 assuming that the historical markup on product cost and selling price are maintained. Round your final answer to two decimal places.
b. Determine the required cost reduction. Enter as a positive number. Round your final answer to two decimal places.
c. Evaluate the three engineering improvements together to determine if the required cost reduction (drift) can be achieved. Enter all amounts as positive numbers. Do not round interim calculations but round your final answers to two decimal places.
1. Direct labor reduction __
2. Additional inspection __
3. Injection molding productivity improvement __
Total savings __
The practice of choosing strategic price points to take advantage of a product- or service-based market in relation to competition is known as competitive pricing.
(a) Target Cost to Maintain a Markup of 25% is $208.
(b) Required Cost Reduction is $12 Per Unit
(c) Total Savings is $9.35 Per Unit
Since services might differ from business to business but a product's features stay the same, firms offering identical items tend to employ competitive pricing more frequently.
a)
Existing Product Cost = $220 per Unit
Existing Selling Price = $275 Per Unit
The markup on product cost =Existing Selling Price-Existing Product Cost)/Existing Product Cost
=($275 - $220) /$220
= 25%
Now Price of Model J20 for next year = $260
Target Cost to Maintain Markup of 25%
= $260 / 125%
= $208.
b)
Required Cost Reduction
= Existing Cost - Target Cost
= $220 - $208
= $12 Per Unit
c)
1. Direct Labour Reduction of $2.55 Per Unit
2. Additional Inspection $1.70 Per Unit
3. Injection molding Productivity Improvement $5.10 Per Unit
Total Savings is $9.35 Per Unit
Saving Due to Direct Labor Reduction Per Unit= $17*9/60
= $2.55 Per Unit
Saving Due to Additional Inspection= $6 - $17*6/60
= $1.70 Per Unit
Injection Molding Productivity Improvement= ($40*30%)* 1/4 + ($20*42%)* 1/4
= $3.00+$2.10
=$5.10 Per Unit
Therefore,
(a) Target Cost to Maintain a Markup of 25% is $208.
(b) Required Cost Reduction is $12 Per Unit
(c) Total Savings is $9.35 Per Unit
Learn more about competitive selling prices here,
https://brainly.com/question/29238927
#SPJ12
The direct labor reduction is $2.55 Per Unit. The Additional inspection is $1.70 Per Unit. The injection molding productivity improvement is $5.10 Per Unit. The total savings are $9.35 Per Unit.
The calculations are provided below:
Existing Product Cost = $220 per Unit
Existing Selling Price = $275 Per Unit
The markup on product cost =Existing Selling Price-Existing Product Cost)/Existing Product Cost
[tex]=\frac{275-220}{220} \\\\=25[/tex]
Now Price of Model J20 for next year = $260
Target Cost to Maintain Markup of 25% = $260 / 125% = $208.
b). Required Cost Reduction = Existing Cost - Target Cost
= $220 - $208
= $12 Per Unit
Saving Due to Direct Labor Reduction PerUnit:
[tex]=\frac{17\times 9}{60} \\\\=2.55 Per Unit[/tex]
Saving Due to Additional Inspection:
[tex]=\frac{6-17\times 6}{60} \\\\=1.70 Per Unit[/tex]
Injection Molding Productivity Improvement
[tex]=(40\times30)\times(20\times42)\times\frac{1}{4} \\\\=3.00+2.10\\\\=5.10 Per Unit[/tex]
Learn more about direct labor costs here:
https://brainly.com/question/14900794
#SPJ12
Respond to the following in a minimum of 175 words:
Select a company with an international presence that you are familiar with or that you learn about by searching the internet. Please do not select a company that has already been the topic of another student's Discussion Question response.
Identify the laws, treaties, acts, and governing bodies (e.g. U.N., WTO, and IMF) that impact their business.
Explain the impact these laws, treaties, acts, and governing bodies have on their business.
Differentiate the impact of those various laws etc. on their business abroad from the impact of similar things on their business in the United States.
A company with an international presence that I am familiar with is Nike Inc.
Laws, treaties, acts, and governing bodies that impact Nike's business include:
1. Laws: Intellectual property laws, labor laws, and consumer protection laws in various countries.
2. Treaties: The Trans-Pacific Partnership (TPP) and the Trade-Related Aspects of Intellectual Property Rights (TRIPS) agreement.
3. Acts: The Dodd-Frank Wall Street Reform and Consumer Protection Act, which requires companies to disclose their use of conflict minerals.4. Governing Bodies: The United Nations (UN), World Trade Organization (WTO), and International Labor Organization (ILO) play a significant role in shaping global business regulations.These laws, treaties, acts, and governing bodies have a profound impact on Nike's business. For nce:
1. Intellectual property laws protect Nike's brand, patents, and trademarks, ensuring exclusivity and preventing counterfeiting.2. Labor laws and the ILO standards influence Nike's supply chain operations by addressing worker safety, fair wages, and working conditions.3. Consumer protection laws dictate product labeling, safety standards, and advertising practices, affecting Nike's global marketing strategies.
4. The UN, WTO, and IMF promote trade liberalization, facilitate dispute resolution, and establish international economic policies that impact Nike's global operations.The impact of these laws, treaties, acts, and governing bodies differs between Nike's international business and its operations in the United States. Internationally, Nike faces varying legal frameworks, cultural nuances, and compliance challenges in each country. In contrast, operating within the United States involves compliance with domestic laws and regulations, which may differ in certain aspects but generally align with the company's home country practices.
Nike must navigate diverse legal systems, adapt to different labor regulations, and comply with country-specific trade agreements, while considering cultural sensitivities and market preferences. Balancing these factors becomes crucial for Nike's success in international markets, as they must tailor their business practices accordingly.
Nike Inc., a multinational corporation renowned for its sportswear and athletic equipment, provides an illustrative example of how laws, treaties, acts, and governing bodies impact international businesses. Numerous legal frameworks influence Nike's operations globally, while the United States presents a distinct regulatory environment.Intellectual property laws are of paramount importance to Nike, safeguarding its brand and innovations. These laws ensure that competitors do not infringe upon Nike's patents, trademarks, and copyrights, granting the company exclusive rights and encouraging ongoing research and development efforts.
Labor laws and the standards set by the ILO significantly impact Nike's supply chain. As Nike outsources its manufacturing operations to countries worldwide, it must adhere to labor laws and comply with ILO standards to uphold fair working conditions, protect worker rights, and address issues like child labor and forced labor. Failure to comply with these regulations can result in reputational damage and legal consequences, affecting Nike's business operations and brand perception.Consumer protection laws also play a vital role in shaping Nike's international business practices. These laws govern product safety, labeling requirements, and advertising standards, ensuring that Nike's products meet the necessary quality standards and adhere to local regulations. Non-compliance may lead to product recalls, penalties, or consumer backlash, negatively impacting Nike's reputation and market share.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
Glenmore Reservoir Corporation paid $4,000,000 in a lump-sum purchase of land, a building, and equipment. The payment consisted of $1,500,000 cash and a 2-year 10% note payable for the balance. An appraisal indicated the following fair values at the time of the purchase:
Land $1,600,000
Building 2,500,000
Equipment 500,000
5a. What is the dollar amount that will show up on the balance sheet for the land, building, and equipment? (round all percentage calculations to the nearest whole amount (e.g. 25% ) and all dollar amounts to the nearest dollar)?
5b. Prepare the journal entry to record the lump-sum purchase (round all percentage calculations to the nearest whole amount (e.g. 25\%) and all dollar amounts to the nearest dollar).
5c. Assume that no payments or journal entries have been made with regards to the note payable. Now assume that after 9 months, the company decides to pay off the note outstanding. Prepare the journal entry to record the retirement of the note payable and all the interest that has accrued up to that point. (round all percentage calculations to the nearest whole amount (e.g. 25\%) and all dollar amounts to the nearest dollar)
The total dollar amount for the land, building, and equipment on the balance sheet is $1,600,000 + $2,500,000 + $500,000 = $4,600,000.
5a. The dollar amount that will show up on the balance sheet for the land, building, and equipment is as follows:
Land: $1,600,000
Building: $2,500,000
Equipment: $500,000
5b. The journal entry to record the lump-sum purchase is as follows:
Land $1,600,000
Building $2,500,000
Equipment $500,000
Cash $1,500,000
Note Payable $2,100,000
The Land, Building, and Equipment accounts are debited with their respective fair values. The Cash account is debited with the cash payment of $1,500,000, and the Note Payable account is credited with the remaining balance of $2,100,000.
5c. To record the retirement of the note payable and the accrued interest after 9 months, the journal entry is as follows:
Note Payable $2,100,000
Interest Expense $175,000
Interest Payable $175,000
Cash $2,275,000
The Note Payable account is debited with the outstanding balance of $2,100,000. The Interest Expense account is debited with the accrued interest of $175,000 (9/12 * 10% * $2,100,000). The Interest Payable account is credited with the same amount of $175,000. Finally, the Cash account is credited with the total payment of $2,275,000 ($2,100,000 + $175,000).
To know more about balance sheet;
https://brainly.com/question/28446946
#SPJ11
Relating to Reading ‘the Role of Accounting in the Financial Crisis: Lessons for the Future", describe the problem of fair value accounting in accounting for securitization using the numerical example in the paper.
How does the new accounting standard resolve/mitigate this problem with participating interest?
Describe how banks manage their regulatory capital using the numerical example in the paper.
In the paper "The Role of Accounting in the Financial Crisis: Lessons for the Future," the problem of fair value accounting in accounting for securitization is discussed. The paper presents a numerical example that illustrates this problem. In the example, a bank originates and securitizes a pool of mortgages, which are then sold to investors. The fair value accounting method requires the bank to recognize the fair value of the securitized assets on its balance sheet. However, the value of these assets can be highly volatile and subject to market fluctuations. This creates challenges in accurately valuing and accounting for securitized assets, especially during periods of financial crisis when market values are uncertain.
To resolve or mitigate this problem with participating interest, the paper suggests the implementation of a new accounting standard. The standard proposes to separate participating interests into two components: the servicing asset and the beneficial interest. The servicing asset represents the value of the rights to service the securitized assets, while the beneficial interest represents the residual value after deducting the servicing asset. This separation allows for a more accurate representation of the fair value of participating interests, as it recognizes the distinct nature and risks associated with servicing rights. By recognizing the servicing asset separately, banks can mitigate the volatility and uncertainty associated with the fair value of securitized assets.
In managing their regulatory capital, the paper presents a numerical example that demonstrates the use of structured investment vehicles (SIVs) by banks. SIVs are off-balance sheet entities that banks use to hold securitized assets. The example shows that banks can transfer securitized assets to SIVs, allowing them to reduce their regulatory capital requirements. This transfer is done by selling assets to the SIV and using the proceeds to fund the purchase of new assets. By moving assets off their balance sheets, banks can reduce the risk-weighted assets and therefore lower their capital requirements. This practice, however, raises concerns about transparency and the ability to accurately assess a bank's true financial health, especially during times of financial crisis.
Learn more about financial crisis here:
brainly.com/question/32368340
#SPJ11
Your friend has two investment opportunities that she is considering and has asked for your advice regarding how she should proceed. One will have an 7.0% rate of return on an investment of $510; the other will have a 9.0% rate of return on an investment of $630. She would like to take advantage of the higher-yielding investment but has only $510 available.
Required:
What is the maximum rate of interest that your friend should be willing to pay to borrow the $120 needed to take advantage of the higher yield?
1. The maximum rate of interest your friend should be willing to pay to borrow the $120 needed to take advantage of the higher yield is approximately 7.2%.
2. To calculate the maximum rate of interest, we need to find the difference in returns between the two investment options. The higher-yielding investment offers a 9.0% rate of return, while the lower-yielding investment offers a 7.0% rate of return. The difference is 9.0% - 7.0% = 2.0%.
Since your friend has $510 available but needs an additional $120 to invest in the higher-yielding option, the interest paid on the borrowed amount will be the difference in returns, which is 2.0% of $120. So, 2.0% of $120 is $2.40.
To find the maximum rate of interest, we divide the interest paid ($2.40) by the amount borrowed ($120) and multiply by 100. This gives us (2.40/120) * 100 = 2%.
Therefore, the maximum rate of interest your friend should be willing to pay is approximately 2.0%.
3. your friend should be willing to pay a maximum interest rate of approximately 2.0% to borrow the $120 needed for the higher-yielding investment, in order to make the most of the higher return opportunity.
To know more about interest , visit:- brainly.com/question/30393144
#SPJ11
Bridgeport Corporation had the following stockholders equity accounts on January 1,2022: common stock ($4 par) $400,000, paid- in capital in excess of par- common stock $215,000, and retained earnings $100,000. In 2022, the company had the following treasury stock transactions. Mar 1 Purchased 7,000 shares at $9 per share June 1 sold 1500 shares at $12 per share Sept 1 sold 2,000 shares at $11 per share Dec 1 sold 1000 shares at $7 per share Bridgeport corporation used the method of accounting for treasury stock. In 2022, the company reported net income of $29,000 -Journalize the treasury stock transactions and prepare the closing entry at December 31,2022 for net income -Open accounts for paid in capital from treasury stock, treasury stock, and retained earnings
-Prepare the stockholders equity section for Bridgeport corporation at December 31,2022?
The stockholders' equity section of Bridgeport Corporation at December 31, 2022 is as follows:Common Stock ($4 par value) $400,000, Paid-in Capital in Excess of Par Value $223,500, Retained Earnings $129,000, and Total Stockholders' Equity $752,500.
Bridgeport Corporation had the following stockholders equity accounts on January 1, 2022:common stock ($4 par) $400,000,paid- in capital in excess of par- common stock $215,000, and retained earnings $100,000. In 2022, the company had the following treasury stock transactions.Mar 1 Purchased 7,000 shares at $9 per shareJune 1 sold 1500 shares at $12 per shareSept 1 sold 2,000 shares at $11 per shareDec 1 sold 1000 shares at $7 per shareTreasury Stock TransactionsJournalizing the treasury stock transactions:Mar. 1 Treasury Stock $63,000Cash $63,000(7,000 shares x $9)June 1 Cash $18,000Treasury Stock $13,500Paid-in Capital from Treasury Stock $4,500(1,500 shares x $12)Sept. 1 Cash $22,000Paid-in Capital from Treasury Stock $8,000Treasury Stock $11,000(2,000 shares x $5.50)($11- $4)Dec. 1 Cash $7,000Paid-in Capital from Treasury Stock $2,000Treasury Stock $6,000(1,000 shares x $6)($7- $1)Closing Entry at December 31, 2022 for Net IncomeRetained Earnings $29,000Income Summary $29,000Accounts for Paid-in Capital from Treasury Stock, Treasury Stock, and Retained EarningsAccounts to be opened:Paid-in Capital from Treasury StockRetained EarningsStockholders Equity Section for Bridgeport Corporation at December 31, 2022Items AmountCommon Stock ($4 par value) $400,000Paid-in Capital in Excess of Par Value $223,500 (215,000+ 4,500+ 8,000+ 2,000- 6,000)Retained Earnings $129,000Total Stockholders' Equity $752,500 (400,000+ 223,500+ 129,000)Therefore, the stockholders' equity section of Bridgeport Corporation at December 31, 2022 is as follows:Common Stock ($4 par value) $400,000, Paid-in Capital in Excess of Par Value $223,500, Retained Earnings $129,000, and Total Stockholders' Equity $752,500.
learn more about stockholders' equity section-
https://brainly.com/question/16337048?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
Marigold Industries can produce 500 units of a necessary component part with the following costs:
Direct Materials $75700
Direct Labour 20500
Variable Overhead. 59000
Fixed Overhead 10800
If Marigold Industries purchases the component externally $3200 of the foxed costs can be avoided. Below what external price for the 500 units would Marigold choose to buy instead of make?
a $96200
b $166000
c $155200
d $158400
To determine the external price at which Marigold Industries would choose to buy the component instead of making it, we need to compare the total costs of making the component with the cost of purchasing it externally.
The total cost of making the component includes direct materials, direct labor, variable overhead, and fixed overhead. The fixed overhead cost that can be avoided if the component is purchased externally is $3200.
Total Cost of Making = Direct Materials + Direct Labor + Variable Overhead + Fixed Overhead - Avoidable Fixed Overhead
Total Cost of Making = $75700 + $20500 + $59000 + $10800 - $3200
Total Cost of Making = $165800
Therefore, Marigold Industries would choose to buy the component externally if the external price for the 500 units is less than $165800.
Among the given options, the external price that is below $165800 is $155200 (option c). Hence, Marigold Industries would choose to buy the component instead of making it at a price of $155200 for the 500 units.
Learn more about cost here:
brainly.com/question/14566816
#SPJ11