When a nonmetal bonds with a nonmetal, a covalent bond is involved. Details about non-metals can be found below.
What is a nonmetal?A nonmetal is an element, such as phosphorus or chlorine, that does not have the chemical or physical properties of a metal.
A metal is known to lose or donate electrons when it goes into a reaction, hence, an electrovalent bond is usually formed.
However, a nonmetal is known to accept or gain electrons when it goes into reactions. This means that when two nonmetals bonds in a chemical reaction, a covalent bond is formed between them.
Covalent bond is a type of chemical bond where two atoms are connected to each other by the sharing of two or more electrons.
Learn more about non-metals at: https://brainly.com/question/20602843
#SPJ1
What is the formula mass of copper(ii) fluoride?
a. 146.10
b. 165.10
c. 101.55
d. 90.00
e. none of the above
The correct option is (c) 101.55.
Copper fluoride (CuF) -Copper(II) Fluoride Dihydrate is slightly soluble in water and has uses in ceramics and in fluxes used for brazing and soldering.Iodide ions are strong reducing agents. Therefore, Copper (II) Iodide reduces to insoluble copper (I) iodide. Thus making CuI2, CuI. CuI is not stable, so it doesn't exist in solution.Copper(II) fluoride is an inorganic compound with the chemical formula CuF2. It is a white crystalline, hygroscopic solid with a rutile-type crystal structure, similar to other fluorides of chemical formulae MF2 (where M is a metal).What is copper fluoride used for?
Copper fluoride is used in ceramics and in fluxes for brazing and soldering. It is only marginally soluble in water. Fluoride compounds have a wide range of uses in modern science and technology, from etching and oil refining to synthetic organic chemistry and the production of medications.Learn more about copper fluoride
brainly.com/question/13130550
#SPJ4
Identify oxidation.
a. Increase in oxidation number.
b. Loss of electrons.
c. Decrease in oxidation number.
d. Gain of electrons.
e. Both A and B
Oxidation is "Increase in oxidation number" as well as loss of electrons.
A rise in oxidation number results from the loss of negative electrons, whereas a reduction in oxidation number results from the gain of electrons. As a consequence, the oxidized element or ion experiences a rise in oxidation number.
As a result of losing electrons in the process, a reactant oxidizes. When a reactant obtains electrons during a reaction, reduction takes place. This frequently happens when acid and metals react.
Therefore, Oxidation is "Increase in oxidation number" as well as loss of electrons.
Hence, the correct answer will be option (e)
To know more about Oxidation
https://brainly.com/question/16976470
#SPJ4
This liquid carries red blood cells and white blood cells around the body. It also transports several different substances in solution, including -------- and------- .
Answer:
Water and Salts
Explanation:
Hope it helps u....
Sodium hydroxide and water will react at room temperature. what does this indicate about its activation energy?
Answer:
Sodium hydroxide and water will react at room temperature. What does this indicate about its activation energy? The activation energy is at exactly 600 kJ. C. The activation energy is very low.
Explanation:
Why is the vapor pressure of a warm lake higher than the vapor pressure of a cold lake?
Answer:
Explanation:
Warm lake vapor pressure is higher than cold lake vapor pressure because it evaporates more quickly. In other words, as the temperature of warm water increases, the kinetic energy of the warm water molecule also increases. As the kinetic energy of the warm water molecule increases, the number of molecules conversion into a vapor also increases, thereby increasing the vapor pressure of warm water.
Answer:
B.
Warm water evaporates more quickly.
Explanation:
i got it right on edmentum!!
Drag the tiles to the correct boxes to compete the pairs. identify the types of chemical reactions occurring in the chemical equations. respiration photosynthesis combustion reaction of fossil fuels methane oxygen → water carbon dioxide heat arrowright glucose oxygen → carbon dioxide water energy arrowright water carbon dioxide sunlight → oxygen glucose arrowright
Photosynthesis: water + carbon dioxide + sunlight → oxygen + glucose
Respiration: glucose + oxygen → carbon dioxide + water + energy
Combustion: methane + oxygen → water + carbon dioxide + heat
What is photosynthesis?The process by which plants convert carbon dioxide, water, and sunshine into oxygen and sugar-based energy is known as photosynthesis.
water + carbon dioxide + sunlight → oxygen + glucose
What is respiration?The sugars created during photosynthesis are combined with oxygen during the process of respiration in plants to create energy for plant development.
glucose + oxygen → carbon dioxide + water + energy
What is a combustion reaction?Combustion is a chemical process between substances that often involves oxygen and produces heat and light in the form of flame.
methane + oxygen → water + carbon dioxide + heat
Learn more about respiration here:
https://brainly.com/question/14548564
#SPJ4
Photosynthesis: water + carbon dioxide + sunlight → oxygen + glucose
Respiration: glucose + oxygen → carbon dioxide + water + energy
Combustion: methane + oxygen → water + carbon dioxide + heat
What is photosynthesis?Green plants and certain other organisms convert light energy into chemical energy through a process called photosynthesis. Light energy is gathered and utilized during photosynthesis in green plants to change water, carbon dioxide, and minerals into oxygen and energy-rich organic molecules.What is respiration?The sugars created during photosynthesis are combined with oxygen during the process of respiration in plants to create energy for plant development. Respiration contrasts photosynthesis in several ways. Plants make their own sustenance to survive in the natural world.What is combustion?Combustion is a chemical reaction that takes place between two or more substances and releases heat and light in the form of a flame.To learn more about photosynthesis visit:
https://brainly.com/question/1388366
#SPJ4
Hydrocarbons containing only single bonds between the carbon atoms are called?
Answer:
Alkanes
Explanation:
Alkanes are hydrocarbons containing only single bonds between the parent chain carbons.
Alkenes are hydrocarbons containing at least one double bond between the parent chain carbons.
Alkynes are hydrocarbons containing at least one triple bond between the parent chain carbons.
What is the correct chemical name for the following structures pictured below?
The IUPAC names of the given compounds are 3-methylpentane, 1,3-butadiene, 1,3-dimethylcyclohexane, 2,3,5,5-tetramethyl-1,3-hexadiene, and 2,2-dimethylpentane respectively.
What are the IUPAC nomenclature rules?Find the longest continuous carbon chain. This chain is called a parent chain.Identify all the substituents attached to the parent chain.Number the carbon atoms from the end which gives the substituents the lowest number.If the substituent occurs more than one then the location of each point is given and the number of times the substituent occurs is indicated by a prefix like di, tri, tetra, and so on.Double bonds are always given preference. Give the double bond as low a number as possible.If there are two chains of equal lengths then choose the chain that hasgreatest numbers of side chainschain whose substituents have the lowest numberhaving least branched side chainsA cyclic (ring) hydrocarbon is represented by the prefix cyclo- which appears in front of the base name.Thus, following the IUPAC nomenclature rules the name of the given compounds are as follows:
3-methylpentane
1,3-butadiene
1,3-dimethylcyclohexane
2,3,5,5-tetramethyl-1,3-hexadiene
and 2,2-dimethylpentane
Learn more about IUPAC nomenclature:
https://brainly.com/question/14094007
#SPJ1
Mehtyl alcohol is called wood spirit. Its molecular formula is CH3OH. Calculate the number of moles that would contain 2.5*10^21 molecules of this compound.
The 2.5 x 10²¹ molecules of CH₃OH have 0.00415 moles.
What is the mole concept?The Mole concept is used to express the amount of substance conveniently. A mole is defined as the amount of substance that contains exactly 6.022 x 10²³ elementary particles of the given substance. Here, elementary particles refer to atoms, molecules, or ions.This fixed number 6.022 x 10²³ is known as Avogadro Number and is denoted by [tex]N_A[/tex]How to calculate the number of moles?The number of moles is given by
[tex]n=\frac{m}{M}[/tex]
When given mass = molar mass of a substance, then no of moles is equal to 1 which is equivalent to 6.022 x 10²³.
We also know,
1 mole has 6.022 x 10²³ molecules of CH₃OH
According to the mole concept,
6.022 x 10²³ molecules of CH₃OH is equal to 1 mole
2.5 x 10²¹molecules of CH₃OH is equal to [tex]\frac{2.5\times10^2^1}{6.022 \times 10^2^3}[/tex] moles
Thus, 2.5 x 10²¹molecules of CH₃OH are equal to 4.15 x 10⁻³ moles or 0.00415 moles
Learn more about the mole concept:
https://brainly.com/question/1427235
#SPJ1
Why is the 6 m naoh solution diluted before titrating the vinegar sample? How might your results be affected if you used the 6 m solution rather than the 0. 3 m naoh?
The 6 M solution NaOH solution diluted before titrating the vinegar sample because pH at the equivalence point changes very rapidly . It is very useful to have dilution solution , so that number of moles that are transferred per drop of the solution is low . So, pH change smaller amount per drop. Having more dilute solution also allows the titration to use volume that is easier to work with.
If you used the 6 M solution was used then the volume required for titration would go down by a factor of 6/0.3 = 20
This means that if a titration took 20ml of the 0.3 M solution then it would take 1ml of the NaOH solution.
Titration consists of adding a controlled and known amount of standard solution with an unknown until the reaction to be complete.
Learn more about NaOH solution
https://brainly.com/question/14296114
#SPJ4
How much sludge in cubic feet per person per year accumulates in lagoon systems?
1 to 2 feet (cubed) per person per year can be accumulated in lagoon systems.
What is meant by lagoon systems?Lagoons are basin-like to collect, retain, and treat wastewater for a predefined amount of time. They are pond-like bodies of water.
Components of lagoon systems:A septic tank plus a small earthen pond with a constant 3-foot depth make up a lagoon system. A septic tank is a sizable, underground, watertight, corrosion-resistant container that collects untreated sewage from a home's plumbing drains.Dumping by septage hauling trucks is a common cause of slug loading into lagoons.Depth of sludge on the bottom of a lagoon that indicates that the lagoon should be cleaned is 1 foot.carbon dioxide gas is used and produced by algae, causing variations in a lagoon's pH.Biological growth provides enough oxygen to sufficiently aerate most lagoons for treatment processes to work.pH above 8.5 keeps lagoons from generating odors.To learn more about lagoon systems visit:
https://brainly.com/question/11702948
#SPJ4
Unless otherwise instructed, you may use the periodic table in the Chemistry: Problems and Solutions
book for this test.
Which series of atomic numbers represents the ordering of consecutive elements within the periodic table?
O 1, 2, 3, 4, ...
O 1, 3, 5, 7, ...
O 10, 20, 30, 40, ...
O 2, 4, 8, 16, ...
The sequence of atomic numbers 1, 2, 3, and 4 denotes the periodic table's ordering of following elements.
What purpose do series serve?Series are significant because they offer a possible point of entry. It's possible for a user to merely be aware of the fact that a publication is part of a specific series or to be searching for all publications in that series without being aware of any of the individual titles. The series could potentially be used as a storage and control system.
A series element is what?There are two ways to recognize elements in a series: The elements are in series if there are two and only two connections between them and a single node. When two elements' currents are determined to be similar by KCL at a node, the elements are in series.
To know more about periodic table visit :
https://brainly.com/question/11155928
#SPJ1
A student weighs out 0. 0422 g of magnesium metal. The magnesium metal is reacted with excess hydrochloric acid to produce hydrogen gas. A sample of hydrogen gas is collected over water in a eudiometer at 32. 0°c. The volume of collected gas is 43. 9 ml and the atmospheric pressure is 832 mmhg. Using the experimentally collected data, calculate r and the percent error.
To learn more about Magnesium chloride reactions visit:
https://brainly.com/question/27891157
#SPJ4
List 4 major types of inhibition modes and clearly indicate the effect on vmax and km for each mode?
The 4 major types of inhibition are Competitive Inhibition, Non-competitive Reversible Inhibition, Non-competitive Irreversible Inhibition, and Uncompetitive Inhibition.
Types of inhibition modes:1. Competitive Inhibition: Competing inhibitors are substances that resemble an enzyme's natural substrate so closely that they vie for the active site. In order to stop additional reactions, the inhibitor binds to the active site and stays there.
The inhibitor and substrate fight for the enzyme's active site because the enzyme may react with the inhibitor and release the products as it normally would with its substrate
2. Non-competitive Inhibition:
Reversible: There is no competition in this instance because the inhibitor and substrate are not related. The substrate and the inhibitor may mix at various places of the complexes of the enzymes [E-I], [E-S], and [E-I-S].And in the Michaelis equation, this kind of inhibition lowers V max but has no impact on Km.The rate at which the enzyme is fully saturated is given by V = V max [S] / Km + [S] (V max).
(Km): The substrate is the Michaelis constant, at which the reaction rate is halved, or at V maximum.
Irreversible: These kinds of inhibitors impact the chemical alteration of an amino acid residue in the enzyme that plays a function in catalysis when they join with the enzyme nearby or at the active site.Additionally, this kind of inhibition lowers Vmax but has no impact on Km.
3. Uncompetitive Inhibition: is the last type, where the inhibitor attaches to the [E-S] complex to create [E-S-I] even if it has no affinity for the enzyme.
However, this kind of inhibition lowers both Vmax and Km.
Learn more about inhibition here:
https://brainly.com/question/13661646
#SPJ4
A bumblebee carries pollen from the male portion of a plant to the female portion of the similar plant. Fertilization occurs. Which statement is true about this type of reproduction?
Answer:
It’s sexual, and the offspring are genetically different from the parents
Explanation:
Since it is the same flower the bee is pollinating, the progeny will be genetically distinct if the bee were to transfer the pollen to the female part of the flower from the male part.
Part 1. determine the molar mass of a 0.314-gram sample of gas having a volume of 1.6 l at 287 k and 0.92 atm. show your work.
part 2. describe the temperature and pressure conditions at which the gas behaves like an ideal gas.
The molar mass of a substance can be calculated by dividing the mass of the substance by its number of moles.
However, the number of moles can be calculated using the following formula:
PV = nRT
Where;
P = pressureV = volumeR = gas law constantT = temperaturen = no of moles0.92 × 1.6 = n × 0.0821 × 287
1.47 = 23.56n
n = 1.47/23.56
n = 0.624moles
Molar mass = 0.314g ÷ 0.624mol
Molar mass = 0.503g/mol
Therefore, the molar mass of a 0.314-gram sample of gas having a volume of 1.6L at 287K and 0.92 atm is 0.503g/mol.
Learn more about molar mass at: https://brainly.com/question/12127540
#SPJ1
Compared to a solution with a ph value of 7, a solution with a thousand times greater hydronium ion concentration has a ph value of.
Answer:
pH = 4
Explanation:
pH is a base 10 logarithmic scale
1000 = 10^3
7 -3 = pH = 4
What is the mass of 4. 00 moles of helium, the gas commonly used to fill party balloons and lighter-than-air ships?
A coin collector has a bag of 50 pennies. What is weighted average of a penny in the sample according to the data?
The weighted average of a penny is = 67.9g
Calculation of average weightThe sample of penny for pre 1982 is a total of = 18 pennies.
The mass of each penny for pre 1982 = 3.1
Therefore the total weight for penny for pre 1982
= 18×3.1
= 55.8
The sample of penny for post 1982 is a total of = 32 pennies.
The mass of each penny for post 1982 = 2.5
Therefore the total weight for penny for post 1982
=32×2.5
= 80
The weighted average
= 55.8+80/2
= 135.8/2
= 67.9g
learn more about mass here:
https://brainly.com/question/14156113
#SPJ1
Write the henderson-hasselbalch equation for a propanoic acid solution (ch3ch2co2h, pa=4. 874)
The Henderson-hasselbalch equation for a propanoic acid solution is expressed as [A-]/[HA] = 2.7.
What is Henderson Hasselbalch Equation ?It is expressed as:
pH = pKa + log([A-]/[HA].
where,
[A-] is molar concentration of conjugate base and
[HA] is molar concentration of weak acid.
Given,
pH = 5.30
Substitute the value in the Henderson Hasselbalch equation
5.30 = 4.874 + log[A-]/ [HA]
log[A-]/[HA] = 5.30 - 4.874
[A-]/[HA] = 10^ 0.426
[A-]/[HA] = 2.7
Thus from the conclusion we can say that The henderson-hasselbalch equation for a propanoic acid solution is expressed as [A-]/[HA] = 2.7.
Learn more about Henderson Hasselbalch equation here:
https://brainly.com/question/13423434
#SPJ4
What two effects do impurities have on the melting point of an organic compound and why?
The two effects do impurities have on the melting point of an organic compound are given as ,
They tend to lower the overall melting point of the compound versus the value for he pure material .They ends to increase the range of the melting point values .The impurities decreases the melting point of the substance of organic compounds . This is because there are unwanted particles which weaken the lattice structure of the solids crystal due to which it become less stable and melts before its original melting point.
Example : Let take a clay and add dirt hen it breaks easily from the points where there is dirt . This is essentially what happens with impurities
Learn more about melting point
https://brainly.com/question/25777663
#SPJ4
Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
The main problem is the release of heat and thereby reducing yield of Ammonia.
What is chemical equilibrium?Chemical equilibrium is defined as the state of a reversible chemical reaction where there is no change in net amount of products and reactants involved in it.
What is an exothermic reaction?
Exothermic reaction is one of the chemical reactions that will produces heat during the formation of products.
At the chemical equilibrium, the chemical reaction will be as follows:
[tex]N_{2}[/tex] + 3[tex]H_{2}[/tex] → 2[tex]NH_{3}[/tex] + energy
The above chemical equilibrium equation indicates that energy will be released due to the reaction of nitrogen and hydrogen. The energy release increases the surrounding temperature and thereby it will reduce the yield of the ammonia. Thus it can be indicated as the major problem.
To know more about exothermic reaction visit:
https://brainly.com/question/10373907
#SPJ4
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteinsconcentration mechanisms do not include?
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include Boiling Stones.
What is Amino Acids ?Amino acids organic compounds. Amino acids are building block of life these are the molecules which combine to form proteins. Amino acids contain the amino functional group that is -NH₂ and carboxyl functional group that is -COOH.
Example: Glycine, Alanine etc.
Thus from the above conclusion we can say that Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include Boiling Stones.
Learn more about the Amino Acids here: https://brainly.com/question/2526971
#SPJ4
Calculate the mass of 3.4 moles of nitric acid (hno3). explain the process or show your work by including all values used to determine the answer.
Answer:
6.34917360^25g
Explanation:
It's been a while since I've done this type of problem so I'm not making any promises that its right hahaha, but I hope it helps anyway. Please let me know whether I'm right or not!
Enough of a monoprotic acid is dissolved in water to produce a 1. 50 m solution. the ph of the resulting solution is 2. 83. calculate the ka for the acid
1.4406 × 10⁻⁶ is the Ka(dissociation constant) for the acid.
The equilibrium constant for the reaction of an acid with water is the acid dissociation constant, where the acid, HA separates into H⁺ and A⁻ ions.
The acid dissociation constant is represented by (Ka).
So let's first imagine that the given monoprotic acid is HA.
HA will dissociate into H⁺ and A⁻ ions.
HA ⇒ H⁺ and A⁻
The formula used for Ka is
Ka = [H⁺] [A⁻] / [HA]
Given
pH = 2.83
[HA] = 1.50 M
From the given pH, we can calculate [H⁺] and [A⁻]
[H⁺] = [A⁻] = 1 × [tex]10^{-2.83}[/tex] = 1.47 × 10⁻³ M
Ka = 1.47 × 10⁻³ × 1.47 × 10⁻³ / 1.50
Ka = 1.4406 × 10⁻⁶
Hence, 1.4406 × 10⁻⁶ is the Ka for the acid.
Learn more about dissociation constant here https://brainly.com/question/3006391
#SPJ4
Which covenant requires the grantor to execute any necessary legal documents (within his power) necessary to fix title defects discovered after closing?
The covenant of further assurances requires the grantor to execute any necessary legal documents (within his power) necessary to fix title defects discovered after closing.
What Are the Six Covenants of Title?A warranty deed is typically signed by both parties when a seller transfers real estate to a buyer. According to Deed Claim, this document certifies that the seller is the legitimate owner of the property and is selling it free of any liens while transferring the legal title to the buyer. The assurances made by the seller are represented by the six covenants of title. Three covenants are regarded as existing covenants, and as such, they are applicable to the parties to the most recent transfer. The other three are future covenants, and if they are broken, any owner may bring a claim against any prior grantor.
Covenant of Seisin
The seller's rightful ownership of the property is guaranteed by the present covenant of seisin.
No Encumbrances
The seller guarantees that the property is possessed free and clear by making the current covenant against encumbrances.
Right to Convey
According to TheLaw.com, having the right to convey indicates that the seller is legally permitted to transfer the property to the buyer.
Quiet Enjoyment
The future covenant of quiet enjoyment guarantees that a third party's legal claim to title won't affect the buyer's right to possession.
Covenant of Warranty
The warranty covenant and the quiet pleasure covenant are extremely similar.
Further Assurances
This prospective covenant is a guarantee that, should the need ever arise, the grantor will take all reasonable steps to assist the grantee in perfecting the title.
Learn more about covenant here:
https://brainly.com/question/16004535
#SPJ4
One metal object is a cube with edges 3.00 cm and a mass of 140.4 g. a second is a sphere with a radius of 1.42 cm and a mass of 61.6 g. are these objects made of the same metal?
Yes, the objects made of the same metal.
The volume of the first object, which is a cube, is equal to the edge length cubed.
This volume is converted to mL as follows:
V1 = [tex](3 cm)^{3}[/tex] = 27 [tex]cm^{3}[/tex] = 27 mL
Based on its given mass, the density will be:
d1 = m1/V1
= 140.4g/ 27.0 mL
= 5.20g/mL
The following thing is a sphere. We calculate the volume of a sphere using the following formula, with the result expressed in mL:
V1 = 4/3 *[tex]\pi[/tex]* [tex](1.42)^{2}[/tex]
= 12 [tex]cm^{3}[/tex]
= 12 mL
The density based on the following mass will be
d2= m2/V2
= 61.6 g/12.0 mL
= 5.14 g/mL
These two computed densities are separated by about 1%. We can determine that these objects are made of the same metal based on the precision of +/- 1% provided.
To learn more about metal objects visit:
https://brainly.com/question/5269608
#SPJ4
Why is the vapor pressure of a warm pale higher than the vapor pressure of a cold lake
The vapor pressure of a warm pale higher than the vapor pressure of a cold lake because Warm water evaporates more quickly.
Hence, Option B is correct answer.
What is Evaporation ?The process in which a liquid or solid is converted into vapour is called Evaporation. When water gains the heat energy then it changes in to gas. When the temperature increases it speeds up the rate of evaporation.
The temperature of warm water increases, the kinetic energy of the warm water molecule also increases.
Thus from the above conclusion we can say that The vapour pressure of a warm lake is higher than the vapor pressure of a cold lake because Warm water evaporates more quickly.
Hence, Option B is correct answer.
Disclaimer: The question was given incomplete on the portal. Here is the complete questions.
Question: Why is the vapor pressure of a warm lake higher than the vapor pressure of a cold lake?
A. Warm water has a greater heat of vaporization.
B. Warm water evaporates more quickly.
C. Cool water evaporates more quickly.
D. Cool water has a greater heat of vaporization.
Learn more about the Evaporation here: https://brainly.com/question/9339710
#SPJ1
A solution of 5. 00 g of lauryl alcohol in 0. 100 kg of benzene freezes at 4. 1°c. what is the approximate molar mass of lauryl alcohol?
The approximate molar mass of lauryl alcohol is 183 g/mol.
As per Raoult's law:
[tex]T_b - T_s =KC m[/tex]
Tb = the freezing point of benzene (5.5oC), Ts = the freezing point of the solution, K = the cryoscopic constant (5.12 K*kg/mol for benzene), and Cm = the molality of the solution.
[tex]m_{l}[/tex]/M[tex]m_{s}[/tex] = [tex]C_{m}[/tex] where ml is the mass of lauryl alcohol and ms is the mass of the solvent.
[tex]T_b - T_s =KC m[/tex]=K[tex]m_{l}[/tex]/M[tex]m_{s}[/tex]
Therefore, M=[tex]\frac{Km_{l} }{(T_b - T_s)m_{s} }[/tex]=[tex]5.12*5/0.1(5.5-4.1)[/tex]=183 g/mol.
Lauryl alcoholAn organic substance called lauryl alcohol is created industrially from coconut or palm kernel oil. It is an alcoholic fat. The use of sodium lauryl sulfate and other sulfate esters of lauryl alcohol as surfactants is extremely common. In shampoos, sodium laureth sulfate, ammonium laureth sulfate, and sodium lauryl sulfate are all utilized. Lauryl alcohol has a floral scent and is flavorless and colorless. In addition to being a flavor-enhancing food additive, lauryl alcohol is also used to create medicines, lubricating lubricants, surfactants, and monolithic polymers. Lauryl alcohol is a kind of emollient used in cosmetics. Lauryl alcohol, a significant scent, and 1-bromododecane, an alkylating agent used to increase the lipophilicity of organic molecules, are both precursors to Lauryl alcohol.
A solution of 5. 00 g of lauryl alcohol in 0. 100 kg of benzene freezes at 4. 1°c. what is the approximate molar mass of lauryl alcohol?
Learn more about lauryl alcohol here:
https://brainly.com/question/14039964
#SPJ4
Compared with the energy it takes to separate oxygen and hydrogen from water. How much energy is released when they recombine?.
The same amount of energy is released when they recombine.
How to separate oxygen and hydrogen from water?Electrolysis is a promising choice for without carbon hydrogen creation from inexhaustible and atomic assets. Electrolysis is the method involved with utilizing power to part water into hydrogen and oxygen. This response happens in a unit called an electrolyzer. Electrolyzers can go in size from little, apparatus size hardware that is appropriate for limited scope dispersed hydrogen creation to huge scope, focal creation offices that could be tied straightforwardly to sustainable or other non-ozone depleting substance radiating types of power creation.How Does it Work?Like energy components, electrolyzers comprise of an anode and a cathode isolated by an electrolyte. Different electrolyzers capability in various ways, fundamentally because of the different kind of electrolyte material included and the ionic species it conducts.
To learn more about electrolysis from the given link
https://brainly.com/question/24063038
#SPJ4