The oxygen consumption for a burmese python at 20 contractions per minute 5,30,35,10,15,20,25 contractions per minute.
PythonThe Eastern Hemisphere's tropical and subtropical regions are home to the genus Python, a family of constricting snakes. For non-venomous flecked snakes, François Marie Daudin suggested the name "Python" in 1803. There are now 10 recognized python species. A new species has been established, and three previously recognized python subspecies have been elevated.
Ythons lack venom, and colubrids (rear-fanged snakes) either lack venom entirely or have a weak venom. It is important to take venomous elapid (front-fanged snake) bites seriously and treat them accordingly. Massive snakes called pythons have a brutal killing style. These snakes, like other strong constrictors like anacondas, will capture their victims with their mouths and wrap around them.
What was the oxygen consumption for a burmese python at 20 contractions per minute?
Learn more about Python here:
https://brainly.com/question/15083944
#SPJ4
The average person will absorb no more than how many mg of calcium at one time?
a. 1500
b. 500
c. 200
d. 1000
The average person will absorb no more than 500 mg of calcium at one time.
So, option B is correct one.
For maximum absorption, no more than 500 mg of calcium should be taken in a single dose. The absorption of the minerals is actually lower by taking too high an amount of calcium at one time from a supplement. Calcium is absorb from the food. If you think you need more a calcium supplement , ask your doctor or dietitian to recommend one. Taking too high amount of calcium at one time, particularly from a supplement , can actually lower the absorption of the mineral.
learn more about calcium
https://brainly.com/question/4023397
#SPJ4
Nitrous acid, hno2, has a ka of 7. 1 ✕ 10-4. what are [h3o ], [no2-], and [oh -] in 0. 40 m hno2?
Nitrous acid, hno2, has an acid dissociation constant - ka of 7. 1 ✕ 10-4. what are [h3o ], [no2-], and [oh -] in 0. 40 m hno2 - 4829 M [OH^-] = 1.439 x 10^-14 M
The acid dissociation constant (Ka) is used to differentiate between strong and weak acids. Strong acids have very high Ka values. The Ka value is determined by examining the equilibrium constant for acid dissociation. The acid dissociates more readily as the Ka increases.
The original molecular definition of an acid, according to Arrhenius, is a molecule that dissociates in an aqueous solution, releasing the hydrogen ion H+ (a proton): HA A + H+. acid dissociation constant is an equilibrium constant for this dissociation reaction.
To learn more about acid dissociation constant please visit -
https://brainly.com/question/4363472
#SPJ4
What is the order of reaction with respect to a and b for a reaction that obeys the rate law: rate = k[a]4[b]5?
The order of reaction with respect to a is 4 and with respect to b is 5 for a reaction that obeys the rate law.
The order of reaction is equal sum of power of concentration of the each reactant present in the reaction that obeys the rate law . The order of individual reactant or species present in the rate law is equal to the power of the of concentration of the respective species or reactant .
Example : If rate law is given as,
rate = k[tex][a]^{4} [b]^{5}[/tex]
The order of reaction with respect to a is 4 and with respect to b is 5 for a reaction that obeys the rate law.
To learn more about order of reaction please click here
https://brainly.com/question/1769080
#SPJ4
What is the percent by volume of ethanol in gasohol when 95 ml of ethanol is added to sufficient gasoline to make 1.0 l of gasohol?
The percentage of volume of ethanol is 9.5%.
What is volume by volume percentage?Volume/volume percentage (v/v% or percent v/v) is a unit used to express how much of a material is present in a solution. It is defined as the volume of the solute divided by the sum of the volumes of the solution, multiplied by one hundred. Examples: The average alcohol concentration (v/v%) of wine is 12 percent.
The formula used to get the volume of ethanol in percentages is
Percent of volume of ethanol = (volume of solute / total volume) * 100
Percent volume of Ethanol = (volume of ethanol / total volume) * 100
= 95mL / 1000mL * 100
= 9.5%
to know more go to - https://brainly.com/question/14589084
#SPJ4
A student sets up the following equation to convert a measurement.
(The ? stands for a number the student is going to calculate.)
Fill in the missing part of this equation.
Answer:
[tex]\frac{1 m}{100 cm}[/tex]
Explanation:
The final answer has a different set of units. In particular, meters (m) changes to centimeters (cm). To make this change, you need to multiply the first value by proportions.
When writing these proportions, it is important that they are arranged in a way that allows for the cancellation of units. For instance, since m is located in the denominator, it must be located in the numerator of the conversion.
Proportion:
1 m = 100 cm
The full expression:
[tex]-1.7*10^5\frac{V}{m}[/tex] · [tex]\frac{1 m}{100 cm}[/tex] = [tex]? \frac{V}{cm}[/tex] ^As you can see, the old unit (m) cancels out and you are left with cm in the denominator.
What would it mean if you added liquid bromine to your final transfer hydrogenation product and the resulting mixture converted from dark maroon to clear upon heating?
For breaking alkenes, liquid bromine was utilized. When liquid bromine is added to the finished product and it turns clear, it has reacted.
The principal test used to determine the organic compound's unsaturation in a qualitative examination of organic compounds is the bromine water test. It aids in determining the compound's functional group.
Unsaturated hydrocarbons and bromine water engage in an additional process. When the double bond breaks, bromine is added. The reaction's final result has no color.
However, there is no addition reaction when bromine water combines with saturated hydrocarbons. As a result, the solution's hue is unchanged and remains brown.
So, a qualitative test for saturated and unsaturated hydrocarbons is a reaction with liquid bromine.
The presence of unsaturated hydrocarbons, or functional groups with double bonds, can be seen in the mixture when it transforms into a clear
Learn more about bromine here:
https://brainly.com/question/11341029
#SPJ4
Moderate alcohol consumption is no more than ________ alcoholic drink(s) daily for adult women and up to ________ drink(s) daily for adult men
Moderate alcohol consumption is no more than [tex]One[/tex] alcoholic drink(s) daily for adult women and up to [tex]Two[/tex] drink(s) daily for adult men.
What is an alcohol?
Alcohol is an organic compound containing a hydroxyl group and a carbon atom; Alcohol can be an intoxicant found in alcoholic beverages.
An alcoholic drink (also called an alcoholic beverage, adult beverage, or simply a drink) is a drink that contains ethanol, a type of alcohol that acts as a drug and is produced by fermentation of grains, fruits, or other sources of sugar.
The consumption of alcoholic drinks, often referred to as "drinking", plays an important social role in many cultures. Most countries have laws regulating the production, sale, and consumption of alcoholic beverages.
So, according to the scientific studies, the alcoholic consumption for women in a day is not more then one and for men is not for two drink(s)
1 Drink includes:
For beer: 355 ML
For Wine: 148 ML
Learn more about alcohol: https://brainly.com/question/22875792
#SPJ4
Draw the major product formed in the reaction involving an acid anhydride dissolved in alcohol.
Learn more about acid anhydride here:
https://brainly.com/question/3678985
#SPJ4
A metal object is to be gold-plated by an electrolytic procedure using aqueous AuCl3 electrolyte. How much gold may be deposited in 3.0 min by a constant current of 10. A
Answer:
This is the answer
Explanation:
charges passed = current x time = 10 x 3 x 60
= 1800 C
mole of charge = 1800 / 96500
= .01865 moles
Au+3 contains 3 positive charges
3 mole of charge will deposit 1 mole of Au .01865 moles will deposit .01865 / 3 mole
= 6.2167 x 10-3 moles.
What is the molarity of nickel ii chloride at 0.500 liters with 1 mole of nickel ii chloride solution?
Answer:
Molarity = 2 M
Explanation:
The molarity can be found using the molarity ratio:
Molarity = moles / volume (L)
You can plug the given moles and volume into the ratio and solve.
Molarity = moles / volume
Molarity = 1 mole / 0.500 L
Molarity = 2 M
Calculate the number of molecules present in 3.4 moles of Ammonia (NH3) [At No. N=7, H=1]
The 3.4 moles of Ammonia (NH₃) have 2.0475 x 10²⁴ molecules of it.
What is a Mole?A mole is a unit used to count the elementary particles such as atoms, molecules, or ions of a substance.1 mole has a fixed value that is 6.022 x 10²³ of something and is known as Avogadro’s number. Avogadro’s number is represented by [tex]N_A[/tex]For example, a mole of hydrogen atom means 6.022 x 10²³ atoms of hydrogen and one mole of hydrogen molecule (H₂) is equal to 6.022 x 10²³ molecules of hydrogen which also means 2 x 6.022 x 10²³ atoms of hydrogen.How to calculate the number of molecules of an atom?We know,
The number of moles is given by
[tex]n =\frac{m}{M}[/tex]
The number of molecules is the product of a number of moles and Avogadro's number[tex]N_A[/tex]
Number of molecules of NH₃ = [tex]n \times N_A[/tex]
= 3.4 x 6.022 x 10²³
= 2.0475 x 10²⁴ molecules
Hence, 3.4 moles of Ammonia have 2.0475 x 10²⁴ molecules
Learn more about mole:
https://brainly.com/question/26416088?referrer=searchResults
#SPJ1
3. 4 g of a nonelectrolyte dissolved in 78. 3 g of water produces a solution that freezes at −4. 5∘c. what is the molar mass of this solute? kf=1. 86∘cm?
3. 4 g of a nonelectrolyte dissolved in 78. 3 g of water produces a solution. The molar mass of the solute will be 17.94.
What is molar mass?
Molar mass of a substance is its mass in grams in per mole of a solution.
Freezing point: Freezing point of a substance is a temperature at which a liquid starts to solidify.
Depression in the freezing point can be calculated
[Depression in freezing point of pure solvent—Freezing point of solution] =[(0) - (-4.5)] °C =4.5 °C
molar mass = Number of moles of solute m / Mass of solvent in Kg
3.4g / M x 1/ 0.0783 kg = 43.42
Substitute AT by 4.5°C , Kr by 1.86 °C/m, and m by 43.42 m in equation (1) as follows:
1.86 x 43.42 / 4.5 = 17.94
Therefore, molar mass of solute to be 17.94.
To learn more about molar mass, refer to the link:
https://brainly.com/question/22997914
#SPJ4
Calculate the ph of a 0.377 m solution of ethylenediamine ( h2nch2ch2nh2 ). the pa values for the acidic form of ethylenediamine ( h 3nch2ch2nh 3 ) are 6.848 ( pa1 ) and 9.928 ( pa2 ).
The final answer is 11.71
The concentration of a given solution (H2NCH2CH2NH2) is 0.314 M
pa1 = 6.848
a1 = 1.42 X [tex]10^{-7}[/tex]
Pa2 = 9.928
a2 = 1.18 X [tex]10^{-10}[/tex]
The equation is given as;
NH2CH2CH2NH2 + H2O ---> NH2CH2CH2NH3+ + OH-
Initial 0.314 0 0
Change -x +x +x
Equilibrium 0.314 -x x x
b1 = Kw / Ka2 = 10^-14 / 1.18 X 10^-10 = 8.47 X 10^-5 = [NH2CH2CH2NH3+][OH-] / [NH2CH2CH2NH2]
8.47 X 10^-5 = x^2 / 0.314 -x
8.47 X 10^-5 X 0.314 - 8.47 X 10^-5x = x^2
x^2 - 2.66 X 10^-5 + 8.47 X 10^-5x = 0
on solving
x = 0.0051 M = [NH2CH2CH2NH3+] = [OH-]
[NH2CH2CH2NH2] = 0.314 - 0.0051 = 0.3089 M
For the second dissociation,
NH2CH2CH2NH3+ + H2O ---> +NH3CH2CH2NH3+ + OH-
Initial 0.0051 0 0.0051
Change -x +x +x
Equilibrium 0.0051 -x x 0.0051 +x
b2 = Kw / Ka1 = 10^-14 / 1.42 X 10^-7 = 7.04 X 10^-8 = [+NH3CH2CH2NH3+] [OH-] / [+NH3CH2CH2NH2]
7.04 X 10^-8 = x (0.0051+x) / (0.0051-x)
We may ignore x in the denominator as b2 is very low
7.04 X 10^-8 = x (0.0051+x) / (0.0051)
3.59 X 10^-10 = 0.0051x + x^2
x = 7.039 X 10^-8 M
[OH-] = 0.0051 + x = 0.0051 approx
[+NH3CH2CH2NH3+] = x = 7.039 X 10^-8 M
NH2CH2CH2NH3+ = 0.0051 +x = 0.0051 M approx
pOH = --log [OH-] = -log 0.0051 = 2.29
pH = 14 - pOH = 11.71
Learn more about ph: https://brainly.com/question/12609985
#SPJ4
What is the concentration of a 57. 10 ml solution of hbr that is completely titrated by 35. 00 ml of a 0. 200 m naoh solution?
The concentration of 57.10 ml solution is Hbr that is completely titrated is 0.326.
What is concentration?Concentration is the total amount of substance in one unit of a solution. The concentration is more when there is less solvent.
Concentration = mass / volume
From the formula of dilution M1V1 = M2V2
Given that the volume 1 is 57.10
Volume 2 is 35.00
Mass is 0.200.
M2 is ?
Putting the values in the equation:
0.200 x 57.10 = m2 x 35.00 = 0.326
m2 = 0.326
Thus, the concentration of a 57. 10 ml solution of Hbr is 0.326 m.
To learn more about concentration, refer to the below link:
https://brainly.com/question/17329736
#SPJ4
With respect to bonding and electrical conductivity, respectively, sulfur hexafluoride, sf6(g), would be described as?
With respect to bonding and electrical conductivity, respectively, sulfur hexafluoride, sf6(g), would be described as "covalent and a nonconductor" because sulfur hexafluoride would be a covalent compound since neither fluorine nor sulfur are metallic elements and aqueous solutions containing covalent bonding do not conduct electricity.
What is electrical conductivity?The ability of an electrical charges or heat to move through a material is measured by its conductivity. A material is considered a conductor if it offers relatively minimal resistance to the transfer of thermal or electric energy.
The electricity is conducted by-
Particles that are electrically charged migrate, which results in electrical conductivity in metals. The existence of electron pairs, that are electrons in an atom's outer shell that really are free to move, is what distinguishes the atom of metal elements. Metals can carry an electric current thanks to these "free electrons."Valence electrons can migrate through into the lattice that makes the physical configuration of a metal because they are free to do so. Free electrons pass an electrical charges as they move through metal in an electric field, resembling billiard balls striking one another.To know more about the Electrical conductivity, here
https://brainly.com/question/902006
#SPJ4
Structures of compounds people use every day are shown. From which group of unsaturated hydrocarbons is each derived? 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right. In a segment of an ongoing chain, 3 iterations of this structure are bonded together by single bonds from the bottom right C H 2 of one structure to the bottom left C H 2 of the next.
The group of unsaturated hydrocarbons which 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right is derived from Alkenes
What are organic compounds?Organic compounds are compounds which contains carbon and hydrogen
Some few classes or organic compounds or hydrocarbons are as follows:
AlkanesAlkenesAlkynesAlkanolsAlkanoic acidKetonesEstersSo therefore, the group of unsaturated hydrocarbons which 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right is derived from Alkenes
Learn more about organic compounds:
https://brainly.com/question/1594044
#SPJ1
Answer:
The answer is A.) Alkene
All the answers in that section are:
Alkene
Aromatic Hydrocarbon
Alkene
Alkyne
Explanation:
Here's the picture as proof. Hope it helps!
What locally acting chemicals are derived from arachidonic acid? multiple choice question. peptide hormones prostaglandins corticosteroids neurotransmitters
Prostaglandins locally acting chemicals are derived from arachidonic acid.
What does arachidonic acid produce?
Arachidonic acid is then quickly transformed into active metabolites, including prostaglandins, prostacyclin, and thromboxanes by cyclooxygenases and leukotrienes by lipoxygenases Page et al (2006). These metabolites' physiological effects are numerous and varied.Is prostaglandins a local hormone?
Prostaglandins are the most diversified group of eicosanoids and are believed to be produced in the majority of bodily tissues. This particular local hormone activates the inflammatory response and pain receptors.What is arachidonic acid found in?
Arachidonic acid can be found mainly in the fatty parts of meats and fish (largely red meat), so vegetarians usually have lower levels of arachidonic acid in the body than those with omnivorous diets. There is a great deal of controversy about arachidonic acid.Learn more about Prostaglandins
brainly.com/question/27180318
#SPJ4
Complete and balance the molecular equation, including the phases, for the reaction of aqueous potassium sulfate, k2so4 , and aqueous strontium iodide, sri2.
The complete and balanced molecular equation is-
K₂SO₄(aq) + SrI₂(aq) → KI(aq)+ SrSO₄(s)
Both sides of the reaction must have an equal amount of atoms in each element to balance the equation.
What is a balanced chemical reaction?A balanced chemical reaction is one in which both the reactant and product sides of the reaction include an equal number of atoms from each of the constituent components. For the chemical equation to adhere to the Law of the conservation of mass, it must be balanced.An equation that has the same number of each type of atom on both sides of the arrow is said to represent a balanced chemical reaction. A chemical reaction is represented symbolically in writing by a chemical equation. The chemical(s) used as the reactant(s) are listed on the left and the chemical(s) used as the product(s) are listed on the right. A chemical reaction requires an equal number of atoms in the reactants and products because, according to the rule of conservation of mass, atoms cannot be generated or destroyed throughout the process.How to balance a molecular chemical equation?First of all, identify the most complicated or complex substances.If possible, start with that material and pick an element or elements that are present in only one reactant and one product. To get the same number of atoms of this element(s) on both sides, adjust the coefficients.If polyatomic ions are present on both sides of the chemical equation, they should be balanced as a whole.The remaining atoms are then balanced, typically ending with the substance that is the least complicated and, if necessary, employing fractional coefficients. In order to get whole numbers for the coefficients if a fractional coefficient was used, multiply both sides of the equation by the denominator.To learn more about Molecular equation click on-
https://brainly.com/question/1594155
#SPJ4
Balanced molecular equation is :
K₂SO₄(aq) + SrI₂(aq) → KI(aq)+ SrSO₄(s)
What is Balanced equation?
If both the reactants and the products of a chemical reaction have the same number of atoms and total charge, the equation for the reaction is said to be balanced. In other words, the mass and charge balances on both sides of the reaction are equal.The equation must be balanced so that each type of atom appears in equal amounts on both the left and right sides of the arrow. This is accomplished by altering the compounds' coefficients (numbers placed in front of compound formulas).In an imbalanced chemical equation, the reactants and products of a reaction are provided, but the amounts required to satisfy the conservation of mass are not given.Learn more about the balanced equation with the help of the given link:
https://brainly.com/question/12192253
#SPJ4
Which of the following can be mixed in solution with H₂CO3 to make a buffer?
OA. Na₂CO3
OB. HF
O C. NaHCO3
OD. NH3
SUBMIT
NaHCO3 is can be mixed in solution with H₂CO3 to make a buffer.
Sodium bicarbonate (IUPAC name: sodium bicarbonate, commonly known as baking soda or sodium bicarbonate) is a compound with the chemical formula NaHCO3. It is a salt composed of a sodium cation (Na+) and bicarbonate anion (HCO3-). Sodium bicarbonate is a crystalline white solid that often looks like a fine powder. It has a slightly salty, alkaline taste similar to soda carbonate (sodium carbonate). The natural mineral form is Narcolite. It is a component of sodium bicarbonate and is dissolved in many mineral springs.
Sodium bicarbonate is an antacid used to relieve heartburn and acid indigestion. Doctors may also prescribe sodium bicarbonate to reduce the acidity of blood and urine under certain conditions.
Learn more about Sodium bicarbonate here: https://brainly.com/question/20693952
#SPJ1
During an experiment, the percent yield of calcium chloride from a reaction was 82.38%. theoretically, the expected amount should have been 105 grams. what was the actual yield from this reaction? caco3 hcl → cacl2 co2 h2o 105.3 grams 101.1 grams 95.6 grams 86.5 grams
The actual theoretically yield from this reaction is 86.5 grams.
What is theoretically yield?
Theoretical yield is the quantity of a product obtained from the complete conversion of the limiting reactant in a chemical reaction. It is the amount of product resulting from a perfect (theoretical) chemical reaction, and thus not the same as the amount you'll actually get from a reaction in the lab.∵ The percentage yield = (actual yield/theoretical yield) * 100.
To calculate the theoretical yield from the balanced reaction:
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O,
It is clear that 1 mole of CaCO₃ reacts with 2 mole of HCl to produce 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole H₂O.
to calculate the no. of moles of 95.0 g CaCO₃
n = mass/molar mass = (95.0 g)/(100.0869 g/mole) = 0.95 mol.
Using cross multiplication:
1 mole of CaCO₃ produce → 1 mole of CaCl₂, from stichiometry.
∴ 0.95 mole of CaCO₃ produce → 0.95 mole of CaCl₂.
∴ The mass of CaCl₂ (theoretical yield) = (no. of moles) * (molar mass) ⇒(0.95 mole)*(110.98 g/mole) = 105.34 g.
∵ The percentage yield = (actual yield/theoretical yield)*100.
The percentage yield = 82.15%, theoretical yield = 105.34 g.
∴ The actual yield of CaCl₂ = (The percentage yield)(theoretical yield)/100
= (82.15%)(105.34 g)/100 = 86.53 g ≅ 86.5 g.
So, the actual theoretically yield from this reaction is 86.5 grams.
Learn more about theoretically yield
brainly.com/question/14966377
#SPJ4
How many grams of sodium chloride are there in 550 ml of a 1. 90 m aqueous solution of sodium chloride?
There are 61.06 grams of of sodium chloride in its aqueous solution.
An aqueous solution is the one in which solvent is always water. Water is the most used universal solvent.
According to the question,
Volume of water = 550 ml = 0.55 L
Molarity of solution = 1.90 M
Formula for molarity = moles of solute / volume of solvent
1.90 = moles of solute / 0.55 L
Moles of solute = 1.90 × 0.55 L = 1.045 moles
Now, moles = mass / molar mass
molar mass of NaCl = 58.44 g/mol
Therefore, 1.045 = mass / 58.55 g/mol
Hence, mass in grams = 1.045 × 58.44 g/mol
Mass = 61.07 grams
To know more about aqueous solution, here
brainly.com/question/22280117
#SPJ4
Which of the following is always equal on each side of a balanced chemical equation?
Select one:
O a. The total number of ions.
Ob. The total number of molecules.
Oc. The total number of atoms of each element.
Od. The total number of different chemical compounds.
Answer:
the total number of molecules
Answer:
C.) The total number of atoms of each element.
Explanation:
An equation is balanced when there is an equal amount of each element on both sides of a reaction. If these values are not identical, they can be changed by adding coefficients to alter the amount of each molecule. By modifying the amount of molecules within the reaction, you can make the total number of atoms of each element equal on both sides.
write a careful description of a metal or an alloy . Use the correct scientific terms.
Explain which properties of metals are particularly suited to the function it has. a) The name of the instrument/ things /apparatus
b) i) If you choose an alloy: please states the name of all the metals that are consisted
in that alloy
ii) If you choose a single type of metal: Please state the metal.
c) Please include explanation in no:2 The example of properties are sonorous,
malleable and so on…..
d) please include descriptions that can fit atleast 2 slides, thank you and have a great/blessing day!
Brass is an alloy of copper and zinc and is durable, malleable and sonorous.
What are alloys?Alloys are products which are obtained from a mixture of two or more metallic elements.
Alloys are preferred to the individual elements because they combine the desirable properties of their component elements.
An example of an alloy is brass.
Brass is mixture of copper and zinc. It combines the shiny and anti-rust properties of zinc with the durability and sonorous property of copper.
It very sonorous and malleable and is used in many musical instruments.
In conclusion, alloys are produced by mixing two or more metals together.
Learn more about alloys at: https://brainly.com/question/14582025
#SPJ1
There are 30.974 grams of phosphorus in one mole. approximately how many atoms of phosphorus are there in one mole? (5.01) 6.02 × 1023 c. 6.02 × 10-23 5.145 × 10-23 d. 1.86 × 1025
There are approximately 6.02 × 10²³ atoms of phosphorus in one mole of 30.974 grams of phosphorus (option A).
How to calculate number of atoms?The number of atoms of a substance can be calculated by multiplying the number of moles of the substance by Avogadro's number. That is;
no of atoms = no of moles × 6.02 × 10²³
According to this question, there are 30.974 grams of phosphorus in one mole of phosphorus. The number of atoms can be calculated as follows:
no of moles of P = 30.974g ÷ 31g/mol = 0.99mol
number of atoms = 0.99 mol × 6.02 × 10²³
number of atoms = 6.02 × 10²³ atoms
Therefore, there are approximately 6.02 × 10²³ atoms of phosphorus in one mole of 30.974 grams of phosphorus.
Learn more about number of atoms at: https://brainly.com/question/8834373
#SPJ1
A catalyst that exists in solution with the reaction mixture is called a ______ catalyst. Multiple choice question. homogeneous intermediate enzyme heterogeneous
Answer: Homogeneous catalyst
Would chromium-51 be useful for dating rocks containing chromium?
why is it not advisable to use sodium hydrogen instead of sodium hydrogen carbonate to relieve pain after being bitten by a bee
Answer:
iron deficiency
Explanation:
For a particular redox reaction, bro− is oxidized to bro−3 and fe3 is reduced to fe2. complete and balance the equation for this reaction in basic solution. the phases are optional
The balanced chemical equation in a basic solution will be,
[tex]BrO^{-} + 4OH^{-} +4Fe^{+3}[/tex] → [tex]BrO_{3} ^{-} + 4H_{2} O+4Fe^{+2}[/tex]
The reaction in which oxidation and reduction reaction takes place simultaneously is called redox reaction or oxidation - reduction reaction .
Rules for the balanced chemical equation in a basic solution are :
First write half - reaction.Now balancing the main atoms in the reactionNow balancing the hydrogen and oxygen atoms on both sides of the reaction .If the oxygen atoms is not balance on both side then add water molecule at that side at that side where more number of oxygen atom is present.If the hydrogen atom are not balanced on both side then add hydroxide ion at that side of where less number of hydrogen are present.Now at last balance the charge.Therefore, the balanced chemical equation in a basic solution will be,
[tex]BrO^{-} + 4OH^{-} +4Fe^{+3}[/tex] → [tex]BrO_{3} ^{-} + 4H_{2} O+4Fe^{+2}[/tex]
To learn more about redox reaction
https://brainly.com/question/13293425
#SPJ4
Na3po4 dissolves in water to produce an electrolytic solution. what is the osmolarity of a 2. 0 × 10-3 m na3po4 solution?
When Na3po4 dissolves in water to produce an electrolytic solution. The osmolarity of a 2. 0 × 10-3 m Na3po4 solution is 0.008osmol/L.
Osmolarity is defined as the number of osmoles of solute particles per unit volume of the solution.
In other words osmolarity is the multiple if molarity
Osmolarity = i× molarity
Here i represents the van't Hoff factor,
[tex]Na_{3}PO_{4}[/tex] ⇒ [tex]3Na^{+} + PO_{4} ^{-}[/tex]
3 Moles of [tex]Na_{} ^{+}[/tex] + 1 mole [tex]PO_{4} ^{-}[/tex] = 4
The number of moles of particles of solute produced in solution are actually called osmoles.
As a result, the van't Hoff factor will be equal to
i=4 Moles ions produced (osmoles) 1mole [tex]Na_{3} PO_{4}[/tex] .dissolved =4
Since we know that,
[tex]Na_{3} PO_{4}[/tex] = [tex]2.0 * 10^{-3} M[/tex]
Osmolarity =
[tex]4*2.0*10^{-3} M[/tex] = [tex]8.0 * 10^{-3} osmol L -10s[/tex]
Thus, the Osmolarity of given solution is 0.008 osmol/L.
learn more about Osmolarity:
https://brainly.com/question/13597129
#SPJ4
The interval shown here represents a _____.
1.) strong acid
2.) weak acid
3.) weak base
4.) strong base
The given pH scale range from [tex]0-3[/tex] indicates the strong acid.
The pH scale, which ranges from [tex]0 -14[/tex], was developed by Sorensen to quantitatively define the strength of an acid and a base.
A pH value indicates the amounts of hydrogen ions and, hydroxide ions present. The negative logarithm of the hydrogen ion concentration is referred to as pH and is represented by:
[tex]pH = -log [H^{+} ][/tex]
For acids, the pH value is always less than [tex]7[/tex].
For bases, the pH value is always more than [tex]7[/tex].
For neutral solution, pH value is equal to [tex]7[/tex].
Thus, for the provided pH scale range [tex]0-3[/tex], it represents strong acid which will give large concentration of protons on dissociation. since lower pH value indicates higher concentration of protons created by an acid.
Learn more about pH scale here:
https://brainly.com/question/10825137
#SPJ1