The speed of light in crown glass with the index of refraction is 1.97×10^8 m/s.
Given index of refraction= 1.52
speed of light in vaccum= 3×10^8 m/s
speed of light in medium=c/n= 3×10^8/1.52= 1.97×10^8 m/s
About index of refraction:
The ratio of the speed of light in a vacuum to that in a second medium with a higher density is used to compute the refractive index (also known as the index of refraction). In mathematical formulae and descriptive writing, the letter n or n' is most frequently used to represent the refractive index variable.
The index of refraction controls how much light is refracted or twisted when it enters a substance.
Learn more about index of refraction here:
https://brainly.com/question/23750645
#SPJ4
The ramp has an efficiency of 80%. If you perform 600 J of work, how much useful work does the ramp do
The ramp does 480J of useful work with an efficiency of 80% .
What is efficiency of work done ?Efficiency is the ratio of the useful energy released by a system to the input energy .Mathematically, efficiency of energy = out put energy/ input energy What is the useful work done by the ramp having efficiency 80% and an input work done 600J?The efficiency =output work done/ input work done 80% =output work done/ 600Joutput work done =( 80×600)/100=480J
Thus, we can conclude that the useful work done by the ramp is 480J.
Learn more about efficiency of energy here:
brainly.com/question/14280607
#SPJ1
Due to its motion in the magnetic field of the bar magnet, the charge will experience a force in which direction?
Due to its motion in the magnetic field of the bar magnet, the charge will experience a force perpendicular to both the velocity of the charge and the magnetic field
Magnetic Field is the region around a magnetic material or a moving electric charge within which the force of magnetism acts. A pictorial representation of the magnetic field which describes how a magnetic force is distributed within and around a magnetic material.
If you point your pointer finger in the direction the positive charge is moving, and then your middle finger in the direction of the magnetic field, your thumb points in the direction of the magnetic force pushing on the moving charge is called right hand rule .
The magnitude of the force is proportional to q, v, B, and the sine of the angle between v and B.
Hence , the magnetic force on a free moving charge is perpendicular to both the velocity of the charge and the magnetic field with direction given by the right hand rule.
To learn more about magnetic field here
https://brainly.com/question/11514007
#SPJ4
The world’s longest organ pipe, in the boardwalk hall auditorium in atlantic city, is 64 feet long. what is the fundamental frequency of this openopen pipe?
The fundamental frequency of this open-open pipe is 8.82 Hz
The quantity of waves that pass a set location in a predetermined period of time is known as frequency. Frequency is the number of full cycles per second in the alternating current direction for an oscillating or fluctuating current. The hertz, also known as Hz, is the accepted unit of frequency.
The temporal rate of change observed in oscillatory and periodic phenomena, such as mechanical vibrations, audio signals (sound), radio waves, and light, is specified by the frequency, an essential parameter in science and engineering.
Assume vs = 344 m/s
f1 = vs/2L
= 344 m/s/ 2∙64 ft/(3.281 ft/m)
= 8.82 Hz
To know more about Frequency refer:
https://brainly.com/question/14131991
#SPJ4
A car drives around a curve with a radius of 42 m at a velocity of 24 m/s. what is the centripetal acceleration of the car? m/s2
Answer:
13.7 m/s^2
Explanation:
Radius, r= 42m
Velocity, v= 24m/s
Ac= V^2/r
Ac=(24)^2/42
Ac= 13.7m/s2
The centripetal acceleration is 13.7 m/s².
Calculation:Centripetal acceleration is given by,
Ac = v²/r
where,
Ac = centripetal acceleration
v = velocity
r = radius
Given,
v = 24 m/s
r = 42 m
To find,
Ac =?
Put the value in the formula,
Ac = v²/r
= (24)²/42
= 576/42
= 13.7 m/s²
Hence, the centripetal acceleration is 13.7 m/s².
Learn more about centripetal acceleration here:
https://brainly.com/question/11445192
#SPJ4
If the current coming out a battery in a series circuit is 2 A, the current going into
the battery on the other side must be
Answer:
2 A
Explanation:
Kirchhoff Laws to the circuit consisting more than two batteries, the current leaving the battery is as same as entering the battery
electronicsstackexchangecom
A 12 V battery is connected to a resistor, a light bulb, and a buzzer. What are the energy conversions that occur in the circuit?
The energy conservation that occurred in the circuit when a 12 V battery is connected to a resistor, a light bulb, and a buzzer is light energy (light bulb) and to sound energy (buzzer).
What is energy conservation?The principle of energy conservation states that energy can neither be created nor destroyed but can be transferred from one form to another.
When a 12 V battery is connected to a resistor, a light bulb, and a buzzer, the energy conservation that occur in the circuit is light energy (light bulb) and to sound energy (buzzer).
Thus, the energy conservation that occurred in the circuit when a 12 V battery is connected to a resistor, a light bulb, and a buzzer is light energy (light bulb) and to sound energy (buzzer).
Learn more about energy conservation here: https://brainly.com/question/166559
#SPJ1
Why is it necessary to level the rotating platform? How would the motion of the revolving mass be affected if the base were not level? Explain
It necessary to level the rotating platform to maintain uniform circular motion.
The outcomes will be negatively impacted if the platform is not level since the heavy end will sway toward the side that is low.
To maintain a balance of the speed it is necessary to level the rotating platform.
What is uniform circular motion?When a particle follows a circular path while maintaining a constant speed, its motion is described as being uniformly circular.
Why is circular motion uniform?A body moving in a circular motion while maintaining a consistent speed is known as uniform circular motion. The velocity changes, but the speed doesn't. A particle's speed is constant if it is moving in a circular motion.Why is uniform circular motion important?Uniform circular motion is a crucial example of direction change while keeping constant speed. In that instance, the object's direction must change continuously in order to keep it moving in a circle while the object's speed remains constant, therefore "uniform."To learn more about uniform circular motion visit:
https://brainly.com/question/2285236
#SPJ4
When you apply a force, f, to an object you get an acceleration of 2m/s2. If you apply the same force to an object with twice the mass, what is the acceleration? m/s.
The consequent acceleration, in, is caused by doubling the net force, F, acting on the same object.ms^-2 is going to 2a.What is net force?The vector sum of the forces exerted on a particle or body is known as the net force. As with all actual forces combined, its corresponding torque, or net force, forms the resultant force and affects the object's rotational motion. A torque-free resultant force may be defined by a system of forces.Learn more about net force with the help of given link:https://brainly.com/question/18038995#SPJ4
The acceleration would be 1m/s²
What is Force?
putting pressure to a door to push or pull it. Because force is a vector variable, it has both magnitude and direction. Force is defined as the "product of mass and acceleration of a body," in accordance with Newton's second law.
Acceleration - any process that alters velocity. There are only two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a speed and a direction.
if the force applied is f
the mass of the object is m
and acceleration is a = 2m/s²
so the relation will be,
f = ma
f = m×2
ATQ,
Now, when mass is 2m
a = f/m
a = 2m / 2m
a = 1 m/s²
to learn more about Acceleration go to - https://brainly.com/question/12550364
#SPJ4
FInal physics question please help asap
The cannonball will be 311.8 m far in meter when it travels horizontally
What is a Projectile ?A projectile is any object like stone, ball or javelin that take a parabolic path when thrown into the air.
The following parameters are given from the question
Ф = 30°u = 60 m/sg = 10 m/s²R = ?Resolve the initial velocity into horizontal and vertical components. That is,
Horizontal component = ucosФVertical component = usinФTo calculate the range that is, the horizontal distance, will can first calculate the total time take by the ball to reach the ground.
Total time T = 2usinФ / g
Substitute all the parameters
T = (2 x 60sin30) / 10
T = (2 x 30) / 10
T = 60 / 10
T = 6 s
The horizontal distance R = ucosФ x T
R = 60 x cos 30 x 6
R = 311.77 m
Therefore, the cannonball will travel 311.8 m approximately horizontally.
Learn more about Projectile here: https://brainly.com/question/24949996
#SPJ1
Which group of theorists believe that we should study only what we can directly observe and measure?
Learning Through Observation
Albert Bandura believed that associations and direct reinforcements simply could not account for all learning. "Learning would be exceedingly laborious, not to mention hazardous if people had to rely solely on the effects of their own actions to inform them what to do," he famously wrote in his 1977 book Social Learning Theory.
Instead, he proposed that much of learning takes place through observation. Children observe the actions of those around them, particularly caregivers and siblings, and then imitate these behaviors. In his well-known Bobo doll experiment, Bandura revealed just how easily children could be led to imitate even negative actions. Children who watched a video of an adult beating up a large inflatable doll were then much more likely to copy those same actions when given a chance.
Perhaps most importantly, Bandura noted that learning something does not necessarily result in a change in behavior. Children frequently learning new things through observation, but might not engage in such behaviors themselves until there is actually a need or motivation to utilize the information.
hope it helps you
A proton moving eastward with a velocity of 5. 0 × 103 m/s enters a magnetic field of 0. 20 t pointing northward. what is the magnitude and direction of the force that acts on the proton?
The magnitude of the force is 1.6*10^-16 N. The direction of force is upward.
The definition of force is the push or pull that causes a massed object to change its velocity. Force is an external agent that has the power to alter a body's resting or moving position. It has a direction and a magnitude. The total amount of forces exerted on an object is referred to as the magnitude of force.
The strength of the force increases when all the force is pulling in the same direction. When force is exerted on an item from different angles, the force's strength reduces. The amount that encapsulates the force's strength is known as its magnitude.
To learn more about force please visit -
https://brainly.com/question/10645619
#SPJ4
F 2000. kg of ice cover your driveway, how many kilojoules of heat would be required to melt it? the heat of fusion of water is 334 j/g .
Answer:
668 000 kJ
Explanation:
2000 kg = 2000 000 gm
2000000 gm * 334 J/g = 668 000 000 J = 668 000 kJ
Type the correct answer in the box. use numerals instead of words. anne has a sample of a substance. its volume is 20 cm3, and its mass is 100 grams. what is the sample’s density? the sample’s density is g/cm3.
The density of sample is 5 g/cm3
Given:
volume of sample = 20 cm3
mass of sample = 100 grams
To Find:
density of sample
Solution: Density is the measure of how much “stuff” is in a given amount of space. For example, a block of the heavier element lead (Pb) will be denser than the softer, lighter element gold (Au). A block of Styrofoam is less dense than a brick. It is defined as mass per unit volume
density = mass/volume
d = 100/20
d = 5 g/cm3
So, density of sample is 5 g/cm3
Learn more about Density here:
https://brainly.com/question/1354972
#SPJ4
What does it mean when work is positive? Velocity is greater than kinetic energy. Kinetic energy is greater than velocity. The environment did work on an object. An object did work on the environment.
Work is said to be positive when Kinetic energy is greater than velocity (option B). Details about work can be found below.
What is work?Work is a measure of energy expended in moving an object; most commonly, force times distance. This means that no work is done if the object does not move.
However, work can either positive or negative depending on the direction of the object and the force applied.
When force and displacement are in the same direction, the work performed on an object is said to be positive work.
This further means that the kinetic energy, which is the energy due to motion, will be greater than the velocity of the object in order to overcome the object.
Therefore, work is said to be positive when kinetic energy is greater than velocity.
Learn more about work at: https://brainly.com/question/18094932
#SPJ1
Answer: (B) Kinetic energy is greater than velocity
Explanation:
What is free-fall acceleration toward the sun at the distance of the earth's orbit?
Answer:
The free fall acceleration toward the sun at the distance of the earth's orbit is 9.8m/s^2
A wooden block contains some nails so that its density is exactly equal to that of water. if it is placed in a tank of water and released from rest when it is completely submerged, it will?
A wooden block contains some nails so that its density is exactly equal to that of water. if it is placed in a tank of water and released from rest when it is completely submerged, it will remain where it is released.
The concept of density seeks to measure the weight of an object in relation to its size. It is the measure of how packed together the particles of that object are. An object placed in a liquid displaces a certain volume of the liquid, based on the relative density of the object and the liquid.
If an object is less dense than a liquid in which it is placed, it displaces a smaller volume of the liquid than its volume, hence only some part of the object will be seen to be under the liquid, the other part will float.
If an object is denser than the liquid in which it is placed, it displaces a larger volume of the liquid than its own volume, making the object to sink and is submerged, sometimes to the bottom of the liquid, but mostly below the point at which it was released.
Finally, if the density of an object and the liquid into which it is submerged is the same. the object's mass per unit volume is the same as the liquid's mass per unit volume, hence the weight and force created due to density will balance and cancel each other out hence making the object to remain where it was submerged.
Learn more about Density here : https://brainly.com/question/1354972
#SPJ4
A "sound" is different than a "sound wave"
because
A. sound is how an animal (including humans) perceives a sound
wave
B. a sound wave can exist without creating a sound
C. sounds only exist within brains
D. all of the above
Answer:
sound is how an animal or human perceives a sound wave
A cardiac pacemaker can be affected by a static magnetic field as small as 1. 7 mt. how close can a pacemaker wearer come to a long, straight wire carrying 28 a?
A cardiac pacemaker can be affected by a static magnetic field as small as 1. 7 mt. pacemaker wearer comes to a long, straight wire carrying 28 amperes.
A pacemaker is a device that regulates an unsteady heartbeat. A pacemaker is inserted into one or more cardiac chambers using flexible, insulated wires called leads. The electrical pulses needed to change the heart rate are delivered by these lines. Some of the most recent pacemakers don't need leads.
The risk of problems is often quite low while having a pacemaker put. The primary worry is that the pacemaker will no longer be able to regulate the heartbeat due to a malfunction or a wire that has moved out of place. The average patient lived 101.9 months (or 8.5 years) after having a pacemaker implanted; at 5, 10, 15, and 20 years later, 65.6%, 44.8%, 30.8%, and 21.4% of patients were still living, respectively.
To learn more about pacemakers please visit -
https://brainly.com/question/3063545
#SPJ4
The closest distance peacemaker come to is r=3mm.
How to find closest distance?Given data:-
B=1.7mt.
I=28A.
by using the equation B=(μ₀I)/2πr
r=μ₀I/2πB
r=[tex]\frac{4\pi *10^{-7} Tm/A *28A}{2\pi (0.0017T)}[/tex]
r=32*[tex]10^{-4}[/tex]m
r=3.2mm.
thus from the above conclusion we can say that when magnetic field is 1.7mt and current =28A then pacemaker can come close r=3.2mm.
Learn more about the magnetic field and current here:-https://brainly.com/question/1594186
#SPJ4
A student volunteers to enter a hypoxic breathing chamber with very low po2 for 10 minutes, and his alveolar po2 drops to 50 mm hg. what other change would occur?
When an individual enters a hypoxic breathing chamber, the changes that would occur would be an increase in the blood pH.
What is hypoxic breathing chamber?A hypoxic breathing chamber is a type of chamber that is built with the ability to cause an artificial high-altitude conditions.
There are various changes that would occur in the body when placed in a hypoxic state. These changes include the following:
Decrease in alveolar oxygen pressure,Increase in blood pH (acidosis)breathlessness, pallor, tachycardia, and pulmonary hypertension.Therefore, when an individual enters a hypoxic breathing chamber, the changes that would occur would be an increase in the blood pH.
Learn more about hypoxia here:
https://brainly.com/question/13870938
#SPJ1
A stretched string is observed to have four equal segments in a standing wave driven at a frequency of 480 hz. what driving frequency will set up a standing wave with five equal segments?
600Hz is the driving frequency needed to create a standing wave with five equal segments.
To find the answer, we have to know about the fundamental frequency.
How to find the driving frequency?The following expression can be used to relate the fundamental frequency to the driving frequency;f(n) = n * f (1)
where, f(1) denotes the fundamental frequency and the driving frequency f(n).
The standing wave has four equal segments, hence with n=4 and f(n)=4, we may calculate the fundamental frequency.f(4) = 4× f (1)
480 = 4× f(1)
f(1) = 480/4 =120Hz.
So, 120Hz is the fundamental frequency.
To determine the driving frequency necessary to create a standing wave with five equally spaced peaks? For, n = 5,f(n) = n 120Hz,
f(5) = 5×120Hz=600Hz.
Consequently, 600Hz is the driving frequency needed to create a standing wave with five equal segments.
Learn more about the fundamental frequency here:
https://brainly.com/question/2288944
#SPJ4
The speed of a car is increased uniformly from 11 meters per second to 19 meters per second. the average speed of the car during this interval is________.
Answer:
ΔV=Vi + Vf
2
ΔV= 11m/s + 19m/s
2
ΔV= 15m/s
Explanation:
What potential difference is required in an electron microscope to give an electron wavelength of 4. 5 nm?
Potential difference required in an electron microscope to give an electron wavelength of 4. 5 nm will be 0.063 V.
The difference in potential between two points that represents the work involved or the energy released in the transfer of a unit quantity of electricity from one point to the other is called potential difference.
The wavelength of an electron is calculated for a given energy (accelerating voltage) by using the de Broglie relation between the momentum p and the wavelength λ of an electron
lambda = 4.5 nm = 4.5 * [tex]10^{-9}[/tex] m
h = [tex]6.626 * 10^{-34}[/tex] J s
e = 1.6 * [tex]10^{-19}[/tex] C
m = 9.1 * [tex]10^{-31}[/tex] kg
Energy = eV
lambda = h / [tex]\sqrt{2mE}[/tex] = h / [tex]\sqrt{2m(eV)}[/tex]
[tex](lambda)^{2}[/tex] = [tex]h^{2}[/tex] / (2m (eV))
V = [tex]h^{2}[/tex] / (2 m e [tex](lambda)^{2}[/tex] )
V = [tex](6.626 * 10^{-34} )^{2}[/tex] / 2 * 9.1 * [tex]10^{-31}[/tex] * 1.6 * [tex]10^{-19}[/tex] * [tex](4.9 * 10^{-9}) ^{2}[/tex]
V = 0.063 V
To learn more about wavelength of an electron here
https://brainly.com/question/17295250
#SPJ4
The electric field at a distance of 10 cm from an isolated point particle with a charge of 2 x 10–9 c is:________
The electric field at a distance of 10 cm from an isolated point particle with a charge of 2 x 10–9 c is 1.8×10³N/C.
When the charge is present in any form, an electric field is linked with each point in space. The value of E, also known as electric field strength, electric field intensity, or simply the electric field, expresses the magnitude and direction of the electric field.
The electric field is formally defined as a vector field associated with each location in space, the force per unit charge exerted on a positive test charge at rest at that point. The electric charge or time-varying magnetic fields generate the electric field. The magnitude of the electric field produced by a point charge Q is given by this equation.
To learn more about electric field please visit -
https://brainly.com/question/15800304
#SPJ4
Ritemade machinery, inc., designs, makes, and sells a drill press. steel equipment company copies the design without ritemade's permission. steel's conduct is actionable provided that:_______
Ritemade machinery, inc., designs, makes, and sells a drill press. steel equipment company copies the design without ritemade's permission. steel's conduct is actionable provided that RiteMade's design is patented.
A design patent is a form of legal protection of the unique visual qualities of a manufactured item. A design patent may be granted if the product has a distinct configuration, distinct surface ornamentation or both or A patent is an exclusive right granted for an invention.
In other words, a patent is an exclusive right to a product or a process that generally provides a new way of doing something, or offers a new technical solution to a problem.
If you create original sketches of your designs, those sketches are protected by copyright law. That means that no one can copy, distribute, publicly display, etc. your sketch without your permission.
To learn more about legal protection here
https://brainly.com/question/14479936
#SPJ4
How does position depend on time on a free falling motion, for short distance, near the surface of the earth?
Answer:
if an object is in free fall for a longer time its position will increase at an exponential rate because the object is accelerating
A positive charge of 94. 0 nc is 22. 0 cm from a negative charge of 53. 0 nc. the force on one of the charges due to the other is approximately________.
A positive charge of 94. 0 NC is 22. 0 cm from a negative charge of 53. 0 NC. The force on one of the charges due to the other is approximately 92.6× 10⁹ N
Force between the two charges depends upon the charges, distance between the charges and the medium between the two charges. It is given by:
F = kq₁q₂ / r²
where q₁ is the charge of the first charge
q₂ is the charge of the second charge
r is the distance between the charges
k is the permitivitty of medium
F is the force between the two charges
Given , q₁ = 94NC
q₂ = 53NC
r = 22cm = 0.22m
On subsituting,
F = 9 × 10⁹ × 94 × 53 / (0.22)²
⇒ F = 92.6 × 10⁹ N
Since, the force between the two charges is equal on both the charges hence, force on one of the charges due to the other is approximately 92.6× 10⁹ N.
Learn more about Force here, https://brainly.com/question/11516376
#SPJ4
If you are operating under basicmed, what is the maximum speed at which you may fly?
Answer:
250 kts
Explanation:
is the flight restriction for BasicMed
If the fifth order minimum in the diffraction pattern of a thin slit is at 40° from the central maximum, what is the highest order minimum in the pattern?
The highest order minimum in the diffraction pattern [tex]7^{0}[/tex].
Diffraction patternThe same way that an imaging mode electron beam is focused on the material to create an image, a parallel electron beam is used to create diffraction patterns. The beam transmitted is focused on the screen's diffraction pattern by the intermediate lens and its chosen area aperture, which determines the beam's width.
Crystallography studies of materials can benefit from the diffraction mode. Using this mode, one can establish the space group and orientation of crystals. the anoparticle's diffraction pattern, which is depicted on the left. The little spots and rings in polycrystalline samples indicate that it is crystalline.
A disc's closely spaced tracks work as a diffraction grating to create the well-known rainbow pattern that is seen while staring at a disc, which is one of the most spectacular instances of diffraction.
If the fifth order minimum in the diffraction pattern of a thin slit is at 40° from the central maximum, what is the highest order minimum in the pattern?
Learn more about diffraction pattern here:
https://brainly.com/question/12290582
#SPJ4
Waves start as a disturbance (an input of energy) in a medium (water, air, the earth etc). The energy of the disturbance is moved from the starting point to other places in the medium by what means?
A
It depends on whether the wave is longitudinal or transverse. Transverse waves move energy differently than longitudinal waves.
B
The means of energy movement in a wave depends on the magnitude (force) of the original wave. Strong waves propagate by a different method than weak ones.
C
Molecules in the original disturbance disturb (move) adjacent molecules which disturb more adjacent molecules and so the wave travels.
D
It depends on the wavelength of the wave, short wavelength waves travel faster and move energy differently than long wavelength waves.
C. Molecules in the original disturbance disturb (move) adjacent molecules which disturb more adjacent molecules and so the wave travels.
What is wave?A wave can be defined as a propagating dynamic disturbance of one or more quantities.
A wave can be propagated in longitudinal or transverse method.
When waves start as a disturbance (an input of energy) in a medium (water, air, the earth etc).
The energy of the disturbance is moved from the starting point to other places in the medium by molecules in the original disturbance disturb (move) adjacent molecules which disturb more adjacent molecules and so the wave travels.
Thus, the correct option is C.
"Molecules in the original disturbance disturb (move) adjacent molecules which disturb more adjacent molecules and so the wave travels".
Learn more about waves here: https://brainly.com/question/25847009
#SPJ1
Water (3090 g ) is heated until it just begins to boil. if the water absorbs 5.09×105 j of heat in the process, what was the initial temperature of the water?
The initial temperature of the water was 60.64 degree Celsius.
What is heat energy?Heat is the type of energy that travels from a high-temperature system to a low-temperature system when it is transmitted between things or systems of different temperatures. also known as thermal energy or heat energy. Usually, heat is expressed in Btu, calories, or joules.
Calculation for the initial temperature of the water;
The formula for release of heat energy is given by;
Q = mc∆t
Q = heat energy
m = mass
c = specific heat (of water)
∆t= change in temperature (= final - initial temp)
final temp of water = boiling point of water i.e. 100*C
'c' for water = 4.186 joule/gram °C
The mass 'm' = 3090 g.
The energy absorbed by water is 5.09×[tex]10^{5}[/tex] = 509000 J.
Let 'T' be the initial temperature.
Substitute all the value in formula to get the equation.
509000 = 3090 × 4.186 × (100 - T)
100 - T = 39.35
T = 100 - 39.35
T = 60.64
Therefore, the initial temperature of the water was 60.64 degree Celsius.
To know more about the thermal energy, here
https://brainly.com/question/19666326
#SPJ4