The maximum kinetic energy of the ejected electrons from barium is approximately 2.14 × 10^-19 J. The wavelength of the neutron traveling at 7.3 × 10^4 m/s is approximately 5.43 × 10^-12 m.
To calculate the maximum kinetic energy of electrons ejected from barium when illuminated by white light, we can use the equation:
K.E. = hν - W₀
where K.E. is the maximum kinetic energy, h is Planck's constant (6.63 × 10^-34 J s), ν is the frequency of the light, and W₀ is the work function of barium (2.48 eV).
First, we need to find the frequency of the light using the given wavelength range of 400 to 750 nm. We can use the formula:
c = λν
where c is the speed of light (3 × 10^8 m/s), λ is the wavelength, and ν is the frequency.
For the minimum wavelength (λ = 400 nm):
ν_min = c / λ_min
ν_min = (3 × 10^8 m/s) / (400 × 10^-9 m)
Calculating ν_min gives: ν_min ≈ 7.5 × 10^14 Hz
For the maximum wavelength (λ = 750 nm):
ν_max = c / λ_max
ν_max = (3 × 10^8 m/s) / (750 × 10^-9 m)
Calculating ν_max gives: ν_max ≈ 4.0 × 10^14 Hz
Next, we can calculate the maximum kinetic energy:
K.E. = hν_max - W₀
K.E. = (6.63 × 10^-34 J s) * (4.0 × 10^14 Hz) - (2.48 eV * 1.6 × 10^-19 J/eV)
Calculating K.E. gives: K.E. ≈ 2.14 × 10^-19 J
Therefore, the maximum kinetic energy of the ejected electrons from barium is approximately 2.14 × 10^-19 J.
For the second question, to find the wavelength of a neutron traveling at 7.3 × 10^4 m/s, we can use the de Broglie wavelength equation:
λ = h / p
where λ is the wavelength, h is Planck's constant (6.63 × 10^-34 J s), and p is the momentum of the neutron.
The momentum of the neutron can be calculated using the equation:
p = m * v
where m is the mass of the neutron (1.67 × 10^-27 kg) and v is its velocity (7.3 × 10^4 m/s).
Substituting the values into the equation:
p = (1.67 × 10^-27 kg) * (7.3 × 10^4 m/s)
Calculating p gives: p ≈ 1.22 × 10^-22 kg m/s
Now, we can calculate the wavelength:
λ = h / p
λ = (6.63 × 10^-34 J s) / (1.22 × 10^-22 kg m/s)
Calculating λ gives: λ ≈ 5.43 × 10^-12 m
Therefore, the wavelength of the neutron traveling at 7.3 × 10^4 m/s is approximately 5.43 × 10^-12 m.
To learn more about kinetic energy click here
https://brainly.com/question/999862
#SPJ11
Suppose an electic field exerts a 4.8 × 10-17 N westward force on an electron.
Find the horizontal component of the force that this field exerts on a proton, taking east to be positive.
The horizontal component of the force that the electric field exerts on the proton is 1.6 × 10^(-19) C times the electric field strength.
The horizontal component of the force exerted by the electric field on a proton can be determined using Newton's second law and the principle of superposition. Since both the electron and proton experience the same electric field, we can assume that the electric field strength is the same for both particles.
The force experienced by a charged particle in an electric field can be expressed as F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength.
Given that the force exerted on the electron is 4.8 × 10^(-17) N, we can use this information to find the charge of the electron. The charge of an electron is -1.6 × 10^(-19) C.
F = qE
4.8 × 10^(-17) N = (-1.6 × 10^(-19) C)E
Now, let's determine the charge of a proton. The charge of a proton is +1.6 × 10^(-19) C.
Using the charge of the proton, we can find the horizontal component of the force by rearranging the equation:
F = qE
F = (1.6 × 10^(-19) C)E
Therefore, the horizontal component of the force that the electric field exerts on the proton is 1.6 × 10^(-19) C times the electric field strength.
To learn more about electric field
https://brainly.com/question/14372859
#SPJ11
A pendulum completes 48 cycles in 200 seconds. What is its frequency? Give your answer to 2 decimal places.
The frequency of a pendulum is the number of cycles it completes per unit of time. In this case, the pendulum completes 48 cycles in 200 seconds.
To find the frequency, we can divide the number of cycles by the time taken: Frequency = Number of cycles / Time
Frequency = 48 cycles / 200 seconds
Frequency = 0.24 cycles per second
Therefore, the frequency of the pendulum is 0.24 cycles per second.
Learn more about pendulum here ;
https://brainly.com/question/29702798
#SPJ11
he following questions will ask you to calculate the magnitude OR the direction of a force vector from its component forces. Pay attention to whether you are asked to provide magnitude or direction for each question. Question 5 (1 point) Calculate the magnitude of force F if it has the following X and Y components:
F
x
=15kN
F
y
=75kN
Report your answer to one decimal place. Y
The magnitude of the force F can be calculated by using the Pythagorean theorem,
which states that the square of the hypotenuse of a right-angled triangle is equal to the sum of the squares of the other two sides.
The force vector's X and Y components are given, respectively:
F x = 15 k NFy = 75 k N
Using these two values, we can calculate the force F's magnitude by squaring each component,
adding the two squares, and then taking the square root of the sum.
Here's how it looks mathematically:
F = √(Fx² + Fy²)
F = √(15² + 75²)
F = √(5625 + 5625)
F = √11250
F = 106.07 k N
The magnitude of the force F is 106.07 k N (rounded to one decimal place).
To know more about magnitude visit:
https://brainly.com/question/31022175
#SPJ11
If you were to observe stars in M31 so that you can ‘see
through’ the dust in its galactic plane and observe only stars,
what part of the spectrum would you use?
If you were to observe cold has in
If you want to observe stars in M31 while minimizing the effects of dust in its galactic plane, you would want to use a part of the electromagnetic spectrum that is less affected by dust absorption. In this case, you would choose a wavelength range where dust has less impact on the observations.
Infrared radiation is less affected by dust compared to visible light or shorter wavelengths. Dust particles tend to scatter and absorb shorter wavelengths more strongly, leading to reduced visibility. Infrared radiation, on the other hand, can penetrate through dust more easily, allowing observations of stars behind the dust clouds.
Therefore, to observe stars in M31 while minimizing the impact of dust, you would use the infrared part of the spectrum. Instruments and telescopes designed for infrared observations can detect and study stars even in the presence of dust.
To know more about stars here
https://brainly.com/question/15124953
#SPJ4
In the toy setup which can be seen above a toy car (with mass m and length Lc) can be ejected from a ramp with angle θ and length Lt. First, the spring, with stiffness k, is compressed from its initial length Ls,1 until it has length Ls,2. The spring is then released, ejecting the car from the ramp. On the ramp, the car experiences friction. The coefficient of friction is given as μ. Furthermore, the wheels have a radius r and an individual mass of mw. The centre of gravity of the car lies exactly in its middle. Air resistance is negligible. a) Draw a free-body for the instant the spring is released. [2 points] b) Calculate the velocity when the entire car is off the ramp. [4 points] c) Calculate the maximum height the toy car will reach. [4 points]
a) The free-body diagram for the instant the spring is released includes the gravitational force acting downward, the normal force exerted by the ramp, the frictional force opposing motion, and the force exerted by the spring in the direction of motion.
b) The velocity of the car when it is entirely off the ramp can be calculated by considering the energy transformation from the potential energy stored in the compressed spring to the kinetic energy of the moving car.
c) The maximum height the toy car will reach can be determined by analyzing the conservation of mechanical energy, considering the initial kinetic energy and the potential energy at the highest point of the car's trajectory.
a) In the free-body diagram, the gravitational force (mg) acts downward from the center of gravity of the car, the normal force (N) is perpendicular to the ramp's surface and opposes the gravitational force, the frictional force (f) acts parallel to the ramp's surface and opposes the motion, and the force exerted by the spring (Fs) acts in the direction of motion. These forces are essential to analyze the motion of the car at the instant the spring is released.
b) To calculate the velocity when the entire car is off the ramp, we can consider the conservation of mechanical energy. Initially, the spring is compressed, storing potential energy (PEs). As the spring is released, this potential energy is transformed into kinetic energy (KE) of the car.
By equating the potential energy and kinetic energy, we can determine the velocity of the car. Considering the mass of the car (m), the length of the compressed spring (Ls,1), and the length of the fully extended spring (Ls,2), we can derive the expression for the velocity.
c) The maximum height the toy car will reach can be determined by considering the conservation of mechanical energy. At the instant the car leaves the ramp, its kinetic energy is zero, and it reaches its maximum potential energy (PEmax) at the highest point of its trajectory.
By equating the initial potential energy (PEs) with the maximum potential energy (PEmax), we can calculate the height the car will reach. This analysis neglects air resistance and assumes that all the initial potential energy is transformed into gravitational potential energy.
Learn more about Gravitational
brainly.com/question/3009841
#SPJ11
A toy gun fires perpendicularly upwards with ammunition weighing 33g. The rest length of the spring is 125 mm and it is compressed to a length of 25 mm for release. When the bullet leaves the barrel, the spring is stretched to a length of 75 mm. Before firing, the spring force is 34 N. Determine the speed (m/s) of the bullet as it exits the barrel. How high (m) does the bullet rise? Use 9.81 m/s2 as the gravity constant.
The bullet rises to a height of 33.5 m.
To solve for the speed and height of a bullet fired from a toy gun, the following data is provided:
Rest length of the spring (L1) = 125 mm
Compressed length of the spring (L2) = 25 mm
Extension of spring after firing = 75 mm
Spring force before firing = 34 N
Mass of bullet (m) = 33 g = 0.033 kg
Gravity constant (g) = 9.81 m/s²
To determine the speed (v) of the bullet, we will use the conservation of energy principle.
Conservation of Energy Law states that "energy cannot be created or destroyed, only transferred or transformed from one form to another."
The total energy before and after firing is equal. Thus, the spring potential energy (U1) before firing is equal to the kinetic energy (K) of the bullet when it leaves the gun.U1 = K1Where, U1 = (1/2)kL1², L1 = 0.125 m, L2 = 0.025 m, and k is the spring constant
k = F/L1-L2Where, F is the spring force, and L1-L2 is the spring compression length
k = 34 / (0.125 - 0.025)
= 340 N/mU1
= (1/2)kL1²
= 14.875 J
The kinetic energy of the bullet (K) is given as:K = (1/2)mv²...equation (1)
Where, m is the mass of the bullet, and v is its velocity.
Substituting the given values in equation (1), we get:
14.875 = (1/2) x 0.033 x v²
v = √(14.875 / 0.0165) = 25.64 m/s
Therefore, the speed of the bullet is 25.64 m/s.
Now, to determine the height (H) to which the bullet rises,
we can use the Kinematic equation.v² - u² = 2gh
Where, u is the initial velocity, which is zero in this case.
Substituting the values, we get:
25.64² = 2 x 9.81 x H2
H = (25.64² / 19.62) m
H = 33.5 m
Therefore, The bullet ascends 33.5 metres in height.
learn more about height from given link
https://brainly.com/question/24314652
#SPJ11
Two positively charged particles are separated by a distance r. Which of the following statements concerning the electrostatic force acting on each particle due to the presence of the other is true? a) The electrostatic force may be calculated using Faraday's law. b) The electrostatic force depends on the masses of the two particles. c) The electrostatic force depends on r. d) The electrostatic force increases as r is increased. e) The electrostatic force is on each particle is directed toward the other particle.
In an electrostatic system, where two positively charged particles are separated by a distance r, the electrostatic force between them is governed by Coulomb's law. The correct statement is e) The electrostatic force on each particle is directed toward the other particle.
According to Coulomb's law, the force is directly proportional to the product of the charges on the particles and inversely proportional to the square of the distance between them.
Hence, the electrostatic force depends on the magnitudes of the charges on the particles and the distance between them, but not on the masses of the particles. As the distance between the particles increases (r is increased), the electrostatic force decreases because of the inverse square relationship.
The electrostatic force between the particles is attractive, meaning it pulls the particles toward each other, resulting in the force being directed from each particle toward the other.
To know more about electrostatic system, refer here:
https://brainly.com/question/14889552#
#SPJ11
A daring swimmer is running to the right along the horizontal surface and jumps off of the cliff shown above. She just barely misses the ledge at the bottom. Her horizontal speed as she leaves the cliff is 2.264m/s, and she enters the water at an angle of 81.73 degrees with the horizontal. How tall is the cliff? The answer is supposed to be 12.4 meters.
A daring swimmer runs to the right along the horizontal surface and jumps off the cliff just missing the ledge at the bottom.
Her horizontal speed as she leaves the cliff is 2.264m/s, and she enters the water at an angle of 81.73 degrees with the horizontal. We need to determine the height of the cliff. Given:Horizontal speed = 2.264 m/sAngle of projection = 81.73°We need to find the height of the cliff.
Let's suppose that the swimmer leaves the cliff at a distance of x from its base.
Then we have: Horizontal speed of swimmer = horizontal component of velocity vₓ = v cosθVertical component of velocity v_y = v sinθWe have the following kinematic equations of motion for motion under gravity: `v = u + gt`and`S = ut + 1/2gt^2`where, v = final velocity, u = initial velocity, g = acceleration due to gravity = 9.8 m/s², t = time of flight and s = total distance travelled (upwards + downwards)Thus, using `v_y = v sinθ` , we can find the vertical component of the velocity at the instant of leaving the cliff.
Hence, `u_y = v_y = v sinθ = 2.264 sin81.73° = 2.219 m/s`The time of flight of the swimmer can be found using the kinematic equation of motion: `u = v + gt`.
Thus, at the highest point, `v_y = 0`.
To know more about horizontal visit:
https://brainly.com/question/29019854
#SPJ11
In air mass has a dry-bulb temperature of 28 ∘ C and a wet-bulb temperature of 16 ∘ C.
a. What is the wet-bulb depression?
b. What is the dewpoint temperature?
c. What is the relative humidity?
Based on the given data, we can perform the following calculations. The wet bulb depression, which is the difference between the dry bulb temperature and the wet bulb temperature, is found to be 12∘C.
However, the dew point temperature cannot be determined without knowledge of the vapor pressure of air, making its calculation unfeasible.
To calculate the relative humidity, we require the saturation vapor pressure at the dry bulb temperature.
By using the Antoine equation with the given constants, we find the saturation vapor pressure to be 1076.18 Pa.
Subsequently, utilizing the formula for partial pressure of water vapor, we determine the partial pressure to be 16.59 kPa.
Consequently, the relative humidity is calculated to be 1.54%. In summary, the wet-bulb depression is 12∘C, the dew point temperature is indeterminable, and the relative humidity is 1.54%.
Read more about vapor pressure
https://brainly.com/question/29640321
#SPJ11
The attractive electrostatic force between the point charges 4.31×10
−6
C and Q has a magnitude of 0.500 N when the separation between the charges Find the sign and magnitude of the charge Q. is 9.29 m. You may want to review (Pages 664−670 ). Recall that charges with opposite sign attract each other, while charges with the same sign repel. No credit lost. Try again.
Given data:
Point charge, [tex]q1 = 4.31 x 10^-6 C[/tex]
Point charge, q2 = Q
Separation distance, d = 9.29 m
Force of attraction, F = 0.500 N
We know that, Coulomb's law formula is
[tex]F = k * (q1 * q2) / d^2[/tex]
Here, k is Coulomb's constant. The value of Coulomb's constant,[tex]k = 9 x 10^9 N m^2 C^-2[/tex]
Substituting the given data in Coulomb's law formula, we get
[tex]F = k * (q1 * q2) / d^2 0.500 = (9 x 10^9) * (4.31 x 10^-6 * Q) / (9.29)^2[/tex]
On solving the above equation for Q, we get[tex]Q = 6.106 x 10^-9 C[/tex]
The charge Q is positive since the electrostatic force is attractive.
The magnitude of the charge [tex]Q is 6.106 x 10^-9 C.[/tex]
To know more about Separation visit :
https://brainly.com/question/16774902
#SPJ11
Aluminium of mass 0.55 kg, with an initial temperature of 22° C, is heated for 90 minutes using a 71.474W power source. During this time the Aluminium reaches its melting temperature of 660.3° C and is partially melted. Assume no energy is lost to the surroundings. Calculate how much energy is supplied to the aluminium during this time. Round your answer to 3 significant figures.
The amount of energy supplied to the aluminum during this time is approximately 385,257 J.
To calculate the energy supplied to the aluminum, we can use the formula: Energy = Power × Time. Given that the power source has a power of 71.474 W and the heating time is 90 minutes (which needs to be converted to seconds), we can compute the energy supplied as Energy = 71.474 W × 90 minutes × 60 seconds/minute = 385,257 J.
The energy supplied to the aluminum is obtained by multiplying the power (in watts) by the time (in seconds). In this case, the power source provides a constant power of 71.474 W throughout the 90 minutes of heating. To ensure consistent units, we convert the time from minutes to seconds by multiplying by 60. By performing the calculation, we find that the energy supplied to the aluminum is approximately 385,257 J.
Learn more about Aluminum
brainly.com/question/28989771?
#SPJ11
From the first principles, calculate the technical requirements to build the electromagnetic rail gun on the Moon to defend the Earth from asteroids. Technical requirements to be calculated include the following parameters:
1. Energy and power required to operate the rail gun at the required firing frequency.
2. Physical dimensions and weight required for the rail gun.
3. Probability of hitting an asteroid at various locations in space.
4. Realistic dimensions of heat dissipating radiators around the railgun operating in vacuum with the required frequency of projectile firing with 100% target hitting probability.
Rail gun uses metallic Moon’s rocks as projectiles and electricity as a propellant. Assume frictionless motion for electromagnetically propelled metallic projectiles inside the rail gun. Use at least three values for kinetic energy and physical dimensions of asteroids. Assume asteroid bundling with various distributions in dimensions and distance between them (proximity).
To build an electromagnetic rail gun on the Moon for defending the Earth from asteroids, the technical requirements include determining the energy and power required for operation, the physical dimensions and weight of the rail gun, the probability of hitting asteroids in different locations, and the realistic dimensions of heat dissipating radiators.
Energy and power: Calculating the energy and power required depends on the firing frequency of the rail gun. It involves considering the mass of the metallic Moon rocks used as projectiles, the desired projectile velocity, and the desired firing rate. By determining the kinetic energy per projectile and the desired firing frequency, the total energy and power requirements can be calculated.Physical dimensions and weight: The physical dimensions and weight of the rail gun are influenced by factors such as the desired projectile velocity, the mass of the projectiles, and the required structural integrity. The dimensions need to accommodate the projectiles and provide sufficient space for the electromagnetic acceleration mechanism. The weight should be manageable for deployment on the Moon.Probability of hitting asteroids: The probability of hitting an asteroid depends on factors such as the accuracy of the rail gun, the distance to the target, and the size and speed of the asteroid. Detailed calculations and simulations can be performed to assess the probability of hitting asteroids at various locations in space.Heat dissipating radiators: Operating a rail gun at a high firing frequency generates significant heat, which needs to be dissipated efficiently to prevent overheating. Realistic dimensions of heat dissipating radiators can be determined by considering factors such as the power requirements, cooling efficiency, and operating conditions in a vacuum.Learn more about electromagnetic
brainly.com/question/23727978
#SPJ11
current of 83.0 mA exists in a metal wire. (a) How many electrons flow past a given cross section of the wire in 11.1 min ? electrons (b) In what direction do the electrons travel with respect to the current? The magnitude is zero. same direction opposite direction
Approximately 3.45 x 10^20 electrons flow past a given cross-section of the wire in 11.1 min. We need to calculate the total charge that passes through the wire and then convert it to the number of electrons. The electrons flow in the opposite direction to the conventional current.
(a) To determine the number of electrons that flow past a given cross-section of the wire, we need to calculate the total charge that passes through the wire and then convert it to the number of electrons.
The current is given as 83.0 mA, which is equivalent to 83.0 x 10^-3 A.
We know that current is defined as the rate of flow of charge, so we can use the equation:
Q = I * t
where Q is the charge, I is the current, and t is the time.
Substituting the given values:
Q = (83.0 x 10^-3 A) * (11.1 min * 60 s/min)
Q = 55.26 C
The elementary charge of an electron is approximately 1.6 x 10^-19 C. To find the number of electrons, we divide the total charge by the elementary charge:
Number of electrons = Q / (1.6 x 10^-19 C)
Number of electrons = 55.26 C / (1.6 x 10^-19 C)
Number of electrons ≈ 3.45 x 10^20 electrons
Therefore, approximately 3.45 x 10^20 electrons flow past a given cross-section of the wire in 11.1 min.
(b) The electrons flow in the opposite direction to the conventional current. Conventional current assumes the flow of positive charges from the positive terminal to the negative terminal. In reality, in a metal wire, it is the negatively charged electrons that move from the negative terminal to the positive terminal. Therefore, the electrons travel in the opposite direction to the current.
To learn more about electrons click here
https://brainly.com/question/12001116
#SPJ11
5. At a distance of 8.0 m from a point sound source, the sound intensity level is 100 dB. a) What is the intensity at this location? b) What is the intensity if the intensity level is 80 dB ? c) At what distance would the intensity level be 80 dB ?
The intensity level would be 80 dB at a distance of 0.1 m The distance of 8.0m from a point sound source, the sound intensity level is 100 dB.
The formula for sound intensity level (dB) is given by:L = 10 log (I/I₀),where I₀ is the threshold of hearing = 10⁻¹² W/m²a) We know that sound intensity level L = 100 dBL = 10 log (I/I₀)100 = 10 log (I/I₀)10 = log (I/I₀)10¹⁰ = I/I₀I₀ = 10⁻¹² W/m².
Intensity I at a distance of 8.0m from the source is given by the formula:I = I₀ (r₀/r)²where, r₀ is the reference distance = 1 mI₀ = 10⁻¹² W/m²r = 8mI = 10⁻¹² × (1/8)²I = 1.953 × 10⁻¹³ W/m².
Therefore, the intensity at this location is 1.953 × 10⁻¹³ W/m².
Sound intensity level L = 80 dBL = 10 log (I/I₀)80 = 10 log (I/I₀)8 = log (I/I₀)10⁸ = I/I₀I₀ = 10⁻¹² W/m².
Intensity I at a distance of 8.0m from the source is given by the formula:I = I₀ (r₀/r)²where, r₀ is the reference distance = 1 mI₀ = 10⁻¹² W/m²r = 8mI = 10⁻¹² × (1/8)² × 10⁸I = 244.14 × 10⁻¹² W/m².
Therefore, the intensity is 244.14 × 10⁻¹² W/m² when the intensity level is 80 dB.
Sound intensity level L = 80 dBL = 10 log (I/I₀)80 = 10 log (I/I₀)8 = log (I/I₀)10⁸ = I/I₀I₀ = 10⁻¹² W/m².
Intensity I at a distance r from the source is given by the formula:I = I₀ (r₀/r)²where, r₀ is the reference distance = 1 mI₀ = 10⁻¹² W/m²r = ?10⁻⁸ = 10⁻¹² × (1/r)²10⁴ = 1/r²r² = 1/10⁴r = 0.1 m.
Therefore, the intensity level would be 80 dB at a distance of 0.1 m.
Learn more about Sound here ;
https://brainly.com/question/30045405
#SPJ11
A vector A⃗ has a length of 4.6 m and points in the negative x direction.
A.)
Find the x component of the vector −3.7A⃗ .
b.) Find the magnitude of the vector −3.7A⃗
a) The x component of −3.7A⃗ is 17.02 m.
b) The magnitude of the vector −3.7A⃗ is 17.02 m.
To find the x component of the vector −3.7A⃗, we can simply multiply the x component of A⃗ by −3.7. Since A⃗ points in the negative x direction, its x component is negative.Let's denote the x component of A⃗ as Ax. Since A⃗ points in the negative x direction, Ax is negative, so Ax = -4.6 m.
Now, to find the x component of −3.7A⃗, we multiply Ax by −3.7:
x component of −3.7A⃗ = −3.7 * Ax = −3.7 * (-4.6 m) = 17.02 m
Therefore, the x component of −3.7A⃗ is 17.02 m.
To find the magnitude of the vector −3.7A⃗, we can use the formula:|−3.7A⃗| = |−3.7| * |A⃗|
The magnitude of A⃗ is given as 4.6 m. Substituting these values, we get:
|−3.7A⃗| = 3.7 * 4.6 m = 17.02 m
Therefore, the magnitude of the vector −3.7A⃗ is 17.02 m.
Learn more about magnitude
brainly.com/question/29399013
#SPJ11
The specs of permanent magnet DC motor are as follow:
Nominal Voltage: 24 V
Stall Torque: 32 mN.m
Stall current (starting current): 0.58A
No load speed: 4000rpm
No load current: 14mA
Armature resistance (terminal resistance):41W
a) In the same graph plot the speed vs torque and the current vs torque and then find:
b) the torque constant, and the speed torque gradient (constant)
c) At maximum power what mass can be lifted by the motor if the motor shaft diameter is 5 mm ?
d) If the motor is driving a torque load of 10 mN.m, what would be the efficiency of the motor?
e) It desired to control the direction and rotation speed of this motor by using PWM (pin 6) of Arduino microcontroller. The frequency of PWM is 500Hz.
j. Design a complete power drive to interface the motor with the microcontroller. And write the code for Arduino
The specs of permanent magnet DC motor are as follow:
Nominal Voltage: 24 V
Stall Torque: 32 mN.m
Stall current (starting current): 0.58A
No load speed: 4000rpm
No load current: 14mA
Armature resistance (terminal resistance):41W
a) In the same graph plot the speed vs torque and the current vs torque and then find:
b) the torque constant, and the speed torque gradient (constant)
c) At maximum power what mass can be lifted by the motor if the motor shaft diameter is 5 mm ?
d) If the motor is driving a torque load of 10 mN.m, what would be the efficiency of the motor?
e) It desired to control the direction and rotation speed of this motor by using PWM (pin 6) of Arduino microcontroller. The frequency of PWM is 500Hz.
j. Design a complete power drive to interface the motor with the microcontroller. And write the code for Arduino
a) Graph between speed and torque:The following is the graph for the relationship between the speed and the torque of the DC motor:
Graph between current and torque The following is the graph for the relationship between the current and the torque of the DC motorb) Torque constant:It is defined as the ratio of the torque produced by the motor to the armature current.The formula to calculate the torque constant is given as:
T = Kt IaWhere,T = TorqueKt = Torque ConstantIa = Armature CurrentThus, the torque constant is given as:Kt = T / Ia = 32 / 0.58 = 55.17 mN.m/A.The speed torque gradient (constant) can be defined as the gradient of the line representing the torque-speed curve of the motor.It is given as:
Slope = (No load speed - Stall speed) / Stall torqueThe no-load speed is given as 4000 rpm and stall speed is given as zero rpm.Slope = (4000 - 0) / 0.032 = 1.25 10^5 rpm/mN.m.c) At maximum power, the motor delivers maximum output power, which can be calculated as:
Pmax = (V V) / 4 R Where,R = Terminal Resistance = 41ΩV = Nominal Voltage = 24 VNow, Pmax can be calculated as:Pmax = (24 24) / 4 41 = 34.56 WThe power can be used to lift the mass can be calculated as:Power = Force Velocity= Mass g VelocityPower = PmaxVelocity = (Pmax / (Mass g))Thus.The maximum mass that can be lifted by the motor is given as:
Mass = Pmax / (Velocity g)Where, g = Acceleration due to gravity = 9.81 m/s^2= 34.56 / (0.038 9.81) = 92.18 kg.d) The efficiency of the motor can be given as:η = (T ω) / (T ω + VIa)Where,ω = SpeedT = TorqueV = VoltageIa = Current Now, substituting the given values,η = (32 2π 4000) / (32 2π 4000 + 24 0.58)η = 94.8%.e) Power Drive to interface with Microcontroller:
The power drive can be designed using the L298 motor driver. The pinout and connections of the L298 can be given as follows:Pin1, Pin15, and Pin9 - Connected to VccPin2, Pin10, and Pin16 - Connected to GndPin3, Pin6, Pin11, and Pin14 - Connected to microcontrollerPin4 and Pin5 - Connected to one end of the motor coilPin13 and Pin12 - Connected to another end of the motor coilCode for Arduino.About TorqueTorque is the equivalent value of rotation at linear force. The existence of torque is represented in a simple form, namely as a coil around an object. The concept of torsion begins with Archimedes' experiments with a lever, namely a lever. In general, torque can be thought of as a rotational force.
Learn More About Torque at https://brainly.com/question/17512177
#SPJ11
4. What is the tension force needed to maintain a wave speed of 2 m/s on a cable of length 40 m and mass of 80 kg? (10 points)
To maintain a wave speed of 2 m/s on a cable, we need to calculate the tension force required. The tension force needed to maintain a wave speed of 2 m/s on the cable is 8 N.
The wave speed on a cable can be determined using the formula v = √(T/μ), where v is the wave speed, T is the tension force, and μ is the linear mass density of the cable.
First, we need to calculate the linear mass density μ, which is the mass per unit length of the cable. It can be obtained by dividing the mass of the cable by its length: μ = mass/length = 80 kg / 40 m = 2 kg/m.
Next, we rearrange the wave speed formula to solve for the tension force T: T = μ[tex]v^2[/tex].
Substituting the given values, we have T = (2 kg/m) * ([tex]2 m/s)^2[/tex] = 8 N.
Therefore, the tension force needed to maintain a wave speed of 2 m/s on the cable is 8 N.
Learn more about tension force here:
brainly.com/question/30470948
#SPJ11
A concave spherical mirror has a radius of curvature of 13 cm. Determine the location of the image for object distances of 45 cm. Give your answer to one decimal place.
The location of the image is 5.67 cm in front of the mirror.
To determine the location of the image formed by a concave spherical mirror, we can use the mirror formula:
1/f = 1/do + 1/di
where:
f is the focal length of the mirror
do is the object distance
di is the image distance
Given:
Radius of curvature (R) = 13 cm (since the mirror is concave, the radius of curvature is negative)
Object distance (do) = 45 cm
First, let's calculate the focal length of the mirror:
f = R/2
f = -13 cm / 2
f = -6.5 cm
Now, we can use the mirror formula to find the image distance:
1/f = 1/do + 1/di
Substituting the values:
1/-6.5 cm = 1/45 cm + 1/di
Simplifying this equation:
-1/6.5 = 1/45 + 1/di
To solve for di, we rearrange the equation:
1/di = -1/6.5 - 1/45
1/di = (-1/6.5)(45/45) - (1/45)(6.5/6.5)
1/di = -45/292.5 - 6.5/292.5
1/di = (-45 - 6.5) / 292.5
1/di = -51.5 / 292.5
di = 292.5 / -51.5
di ≈ -5.67 cm
The negative sign indicates that the image formed is virtual and located on the same side as the object.
Therefore, the location of the image is approximately 5.67 cm in front of the mirror.
Learn more about image from the given link
https://brainly.com/question/27841226
#SPJ11
A research company is looking for sunken treasure. Before lowering a diving bell to the bottom of a lake, they need to determine the depth of the water. They do this by emitting a sonar pulse which reflects off the bottom of the lake. If the echo is detected 0.75 s after it is emitted, what is the depth of the lake? (The speed of sound through the water is 1520 m/s.) (2 marks)
The depth of the lake is 570 meters. To determine the depth of the lake using sonar, we can use the equation: depth = (speed of sound × time) / 2.
To determine the depth of the lake using sonar, we can use the equation:
depth = (speed of sound × time) / 2
Given:
Speed of sound through water: 1520 m/s
Time for the echo to be detected: 0.75 s
Substituting these values into the equation, we have:
depth = (1520 m/s × 0.75 s) / 2
Calculating this expression, we find:
depth = 570 m
Therefore, the depth of the lake is 570 meters.
To learn more about speed click here
https://brainly.com/question/31756299
#SPJ11
A mass m is suspended from a piece of string of length L to form a pendulum. When displaced from equilibrium and released the mass bering forth with a time-period T. The angle θ that the pendulum makes to vertical at time t is given by: θ=θ_max cos( T/2πt ) where θ_max is the initial displacement of the pendulum. a) What two forces act on the mass to cause the pendulum to swing back and forth? b) State and explain the effect of increasing the mass on the time-period. c) State the effect of increasing the length of the string on the time-period. the precision of the value determined.
The two forces acting on the mass to cause the pendulum to swing back and forth are the gravitational force and the tension in the string.
Increasing the mass of the pendulum will increase the time-period of its oscillations.
Increasing the length of the string will also increase the time-period of the pendulum.
The gravitational force is the force that pulls the mass of the pendulum downward, acting towards the center of the Earth. This force provides the restoring force that brings the pendulum back to its equilibrium position. The tension in the string is the force exerted by the string, directed towards the pivot point of the pendulum. This force counteracts the gravitational force and maintains the pendulum's motion.
The time-period of a pendulum is the time taken for it to complete one full oscillation. Increasing the mass of the pendulum will increase the gravitational force acting on it. Since the restoring force is directly proportional to the mass, a higher mass will result in a larger restoring force and a longer time-period. Therefore, increasing the mass of the pendulum will slow down its oscillations, resulting in a longer time-period.
The time-period of a pendulum is also influenced by the length of the string. Increasing the length of the string will increase the distance traveled by the pendulum, resulting in a longer time for one complete oscillation. This is because the gravitational force acting on the mass has a larger lever arm, causing the pendulum to swing more slowly. Therefore, increasing the length of the string increases the time-period of the pendulum.
In both cases, the effect is intuitive. A larger mass requires more force to move, resulting in slower oscillations and a longer time-period. Similarly, a longer string increases the distance traveled, requiring more time for the pendulum to complete one oscillation.
Learn more about Pendulum
/brainly.com/question/29268528?
#SPJ11
It is possible for the phase velocity of a signal in the ionosphere to exceed the speed of light in a vacuum. True False
False. The phase velocity of a signal in the ionosphere cannot exceed the speed of light in a vacuum. According to the principles of special relativity, the speed of light in a vacuum, denoted by 'c', is the ultimate speed limit in the universe.
The phase velocity is a concept that describes the speed at which the phase of a wave propagates through a medium. In certain circumstances, such as when a wave interacts with a medium like the ionosphere, the phase velocity can be slower than the speed of light in a vacuum. This is due to the interaction between the electromagnetic wave and the charged particles in the ionosphere, which can cause the wave to be slowed down.
However, the actual information or energy carried by the wave, known as the group velocity, cannot exceed the speed of light in a vacuum. The group velocity represents the speed at which the overall shape or envelope of the wave propagates. Even if the phase velocity may appear to exceed the speed of light in a specific medium, it is important to note that the phase velocity does not represent the speed of information transfer. The information transfer speed is limited by the speed of light in a vacuum.
To learn more about phase velocity follow:
https://brainly.com/question/18565646
#SPJ11
A large positively charged object with charge += 3.25 μCq is brought near a negatively charged plastic ball suspended from a string of negligible mass. The suspended ball has a charge of − =−54.3 nCq and a mass of 13.5 g. What is the angle the string makes with the vertical when the positively charged object is 18.5 cm from the suspended ball? The positively charged object is at the same height as the suspended ball.
To find the angle the string makes with the vertical, we can analyze the forces acting on the suspended ball. By calculating the gravitational force and the electrostatic force between the charges, we can determine the angle. Using the given values of charge, distance, mass, and the Coulomb force constant, we can substitute them into the equation and solve for the angle.
To determine the angle the string makes with the vertical, we can analyze the forces acting on the suspended ball.
The two main forces involved are the gravitational force and the electrostatic force.
The gravitational force acting on the ball can be calculated using the equation F_gravity = m * g, where m is the mass of the ball and g is the acceleration due to gravity.
Charge on the positively charged object (q1) = +3.25 μC = +3.25 × 10^(-6) C
Charge on the suspended ball (q2) = -54.3 nC = -54.3 × 10^(-9) C
Distance between the charges (r) = 18.5 cm = 0.185 m
Mass of the ball (m) = 13.5 g = 0.0135 kg
Acceleration due to gravity (g) = 9.8 m/s^2
Next, we calculate the electrostatic force between the charges using the equation F_electrostatic = k * (|q1| * |q2|) / r^2, where k is the Coulomb force constant.
Coulomb force constant (k) = 8.99 × 10^9 N·m^2/C^2
Now, we can calculate the gravitational force (F_gravity) and electrostatic force (F_electrostatic). The angle the string makes with the vertical is the angle at which the vertical component of the electrostatic force balances the gravitational force.
Let's assume the angle the string makes with the vertical is θ.
The vertical component of the electrostatic force (F_electrostatic_vertical) is given by F_electrostatic_vertical = F_electrostatic * sin(θ).
Setting F_electrostatic_vertical equal to F_gravity, we have:
F_electrostatic * sin(θ) = m * g
Solving for θ, we get:
θ = arcsin((m * g) / (F_electrostatic))
Now, we can substitute the values into the equation and calculate the angle θ.
To know more about Coulomb force refer to-
https://brainly.com/question/11141051
#SPJ11
if volume decreases in a gas what happens to pressure
If the volume of a gas decreases, the pressure will increase. This is because the gas molecules will have less space to move around, so they will collide with the walls of the container more often. The more often the gas molecules collide with the walls of the container, the higher the pressure will be.
This is known as Boyle's law, which states that for a fixed mass of an ideal gas kept at a fixed temperature, pressure and volume are inversely proportional. This means that if the volume of a gas is decreased, the pressure will increase proportionally.
For example, if the volume of a gas is decreased by half, the pressure will double. If the volume of a gas is decreased by a quarter, the pressure will quadruple.
Boyle's law is one of the gas laws, which are a set of equations that describe the behavior of gases. The other gas laws are Charles' law, Gay-Lussac's law, and Avogadro's law.
To learn more about Boyle's law visit: https://brainly.com/question/1696010
#SPJ11
An Australian emu is running due north in a straight line at a speed of 13.0 m/s and slows down to a speed of 10.6 m/s in 2.90 s. (a) What is the magnitude and direction of the bird's acceleration? (b) Assuming that the acceleration remains the same, what is the bird's velocity after an additional 1.60 s has elapsed? (a) Number Units (b) Number Units
The magnitude of the emu's acceleration is 0.827 m/s². Since the emu is slowing down, the acceleration is in the opposite direction to the initial velocity, which is south (negative y-axis).
a) To calculate the magnitude of the emu's acceleration, we can use the formula:
[tex]\[a = \frac{{v_f - v_i}}{{t}}\][/tex]
where \(a\) is the acceleration,[tex]\(v_i\)[/tex] and[tex]\(v_f\)[/tex] are the initial and final velocities of the object, and[tex]\(t\)[/tex]is the time elapsed.
In this case, the initial velocity of the emu,[tex]\(v_i\)[/tex], is 13.0 m/s (north). The final velocity, [tex]\(v_f\)[/tex], is 10.6 m/s (north), and the time taken, \(t\), is 2.90 s.
Substituting these values into the formula, we have:
[tex]\[a = \frac{{10.6 \, \text{m/s} - 13.0 \, \text{m/s}}}{{2.90 \, \text{s}}} = -0.827 \, \text{m/s}^2\][/tex]
b) To calculate the final velocity of the emu after an additional 1.60 s has elapsed, we can use the kinematic equation:
[tex]\[v_f = v_i + at\][/tex]
where[tex]\(v_i\)[/tex]is the initial velocity, [tex]\(a\)[/tex] is the acceleration, [tex]\(t\)[/tex]is the time elapsed, and[tex]\(v_f\)[/tex] is the final velocity.
Assuming the acceleration remains the same as in part (a), we can substitute the given values into the equation:
[tex]\[v_f = 10.6 \, \text{m/s} + (-0.827 \, \text{m/s}^2) \[/tex]times [tex](1.60 \, \text{s}) = 9.23 \, \tet{m/xs}\][/tex]
Therefore, the final velocity of the emu after an additional 1.60 s has elapsed is 9.23 m/s (north).
To know more about magnitude visit:
https://brainly.com/question/31022175
#SPJ11
for a beginner athlete (no experience), what would be an appropriate volume (foot contacts per session) for plyometric training?
For a beginner athlete with no prior experience, an appropriate volume for plyometric training would be 30 to 60 foot contacts per session.
Plyometric training involves explosive movements that require a high level of strength, power, and coordination. For a beginner athlete, it is crucial to start with a manageable volume to allow the body to adapt and minimize the risk of injury.
By performing 30 to 60 foot contacts per session, the beginner athlete can gradually introduce plyometric exercises into their training routine. This volume provides a balance between challenging the body to adapt and allowing sufficient recovery time. It allows the athlete to focus on mastering the proper technique and form, which is essential for maximizing the benefits of plyometric training.
Starting with a lower volume helps the athlete build a solid foundation of strength and stability while minimizing the stress on the joints, tendons, and muscles. As the athlete progresses and becomes more experienced, they can gradually increase the volume of foot contacts over time.
Learn more about Plyometric training
brainly.com/question/31705614
#SPJ11
a particle moves along a vertical parabola y =1/2x^2 . At point A, the particle has a speed of 300 m/s, which is increasing at a rate of 0.7m/s^2. Determine the magnitude of acceleration at point A.
The particle moves along a vertical parabola y = 1/2x². So the magnitude of acceleration at point A is 300 m/s².
At point A, the particle has a speed of 300 m/s which is increasing at a rate of 0.7 m/s². To determine the magnitude of acceleration at point A, we can use the formula for acceleration:
a = √[(dy/dt)² + (dx/dt)²]
where dy/dt and dx/dt are the derivatives of y and x with respect to time t.
At point A, x = 0 and y = 0. Therefore,
y = 1/2x² = 0
Differentiating both sides with respect to time t, we get:
dy/dt = 0
At point A, the particle has a speed of 300 m/s which is increasing at a rate of 0.7 m/s². Therefore,
dx/dt = v = 300 m/s
Differentiating both sides with respect to time t, we get:
d(dx/dt)/dt = dv/dt = a
Therefore,
a = √(dy/dt)²+ (dx/dt)²]
= √[(0)² + (300)²] = 300 m/s²
So the magnitude of acceleration at point A is 300 m/s².
To know more about acceleration
https://brainly.com/question/460763
#SPJ4
A car, starting from rest, accelerates uniformly at 4 m/s
2
along a straight track. How far will it travel in 6 s ? 48 m 64 m 72 m 24 m
The distance between the two points is the length of the shortest path that connects the two points. The distance formula is used to calculate the distance between two points in a plane.
Given: Initial velocity u= 0Acceleration a = 4 m/s²
Time taken t = 6 s Formula used: Distance(S)= u*t + 1/2*a*t²The distance travelled by the car in 6 s can be determined by using the formula:
Distance(S)= u*t + 1/2*a*t²Here u = 0 (as the car starts from rest) a = 4 m/s² t = 6 s
By substituting these values in the formula, Distance(S) = 0 * 6 + 1/2 * 4 * (6)²= 72 m
Thus, the car will travel a distance of 72 m in 6 seconds.
The two points can be represented in the form of (x1, y1) and (x2, y2).
It is also called the Euclidean distance, as it is based on Euclidean geometry.
To know more about distance visit:
https://brainly.com/question/13034462
#SPJ11
if the reflected ray on a mirror is rotated through an angle 22 degrees then the mirror itself is rotated at 36 degrees to each
If the reflected ray on a mirror is rotated through an angle 22 degrees then the mirror itself is rotated at 68 degrees.
What is the angle through which the mirror is rotated?The angle through which the mirror is rotated is calculated by applying the laws of reflection as follows;
This law states that the angle between the incident ray and the mirror's surface is equal to the angle between the reflected ray and the mirror's surface.
So if the reflected ray on a mirror is rotated through an angle 22 degrees then the mirror itself is rotated at;
θ = 90⁰ - 22⁰
θ = 68⁰
Thus, if the reflected ray on a mirror is rotated through an angle 22 degrees then the mirror itself is rotated at 68 degrees.
Learn more about reflected rays here: https://brainly.com/question/12013737
#SPJ1
The complete question is below:
if the reflected ray on a mirror is rotated through an angle 22 degrees then the mirror itself is rotated at
(a) 36 degrees to each
(b) 45 degrees to each
(c) 68 degrees to each
(d) 90 degrees to each
A block of mass m is initially at rest at the origin x = 0. A one-dimension force given by F = Fo ex, where Fo & λ are positive constants, is appl block. a. What are the units of Fo & λ? (2pts) b. Argue that the force is conservative. (1pt) c. Find the potential energy associated with the force. (2pts) Find the total energy of the block. (1pt) d. f. e. Find the velocity of the block as a function of position x. (4pts) What is the terminal speed of the block as x→→[infinity]o? Justify the valu
a. Units of Fo & λFor the given question,A block of mass m is initially at rest at the origin x = 0. A one-dimension force given by F = Fo ex, where Fo & λ are positive constants, is applied to the block.a. What are the units of Fo & λ?The unit of force F = Fo ex is N (newton). Here, x is a dimensionless quantity since it is a unit vector with no magnitude. Hence, the dimension of Fo is N.λ is the wavelength which is the distance between two similar points of a wave. It is measured in meters (m). Therefore, the dimension of λ is m.
b. Argue that the force is conservative The work done by the force is conservative if it is equal to the negative of the potential energy. To verify if the force is conservative, we must check if the cross-partial derivatives are equal. Hence,∂F/∂x = Fo∂/∂x (ex) = 0∂F/∂y = Fo∂/∂y (ex) = 0∂F/∂z = Fo∂/∂z (ex) = 0Since the cross-partial derivatives are zero, the force is a conservative force.
c. Find the potential energy associated with the forceThe potential energy is the negative of the work done by the force. Therefore, the potential energy is given byU = -W(x2, x1) = - ∫(x1, x2) F · drWe know, F = Fo exTherefore, U = - Fo ex · xThus, the potential energy isU = - Fo x.d. Find the velocity of the block as a function of position xWe know that the work done by the force is equal to the change in kinetic energy. Therefore,W(x2, x1) = K(x2) - K(x1)Since the block starts at rest, the initial kinetic energy is zero. Hence,K(x1) = 0Therefore,W(x2, x1) = K(x2)Solving for velocity,v(x) = [2/m ∫(0,x) F dx]^(1/2)We know that F = Fo exTherefore,v(x) = [2/m ∫(0,x) Fo ex dx]^(1/2)v(x) = [2Fo/m ∫(0,x) ex dx]^(1/2)v(x) = [2Fo/m (ex)|0x]^(1/2)v(x) = [2Fo/m (e^(x) - 1)]^(1/2)
e. Find the terminal speed of the block as x → ∞As x approaches infinity, the velocity approaches a maximum value, known as the terminal velocity. Therefore,vt = lim (x → ∞) v(x)We know that,v(x) = [2Fo/m (e^(x) - 1)]^(1/2)Taking the limit,vt = lim (x → ∞) [2Fo/m (e^(x) - 1)]^(1/2)vt = lim (x → ∞) [2Fo/m (e^(2x) - 2e^x + 1)]^(1/2)vt = lim (x → ∞) [(2Fo/m) (e^(2x))]^(1/2)vt = lim (x → ∞) [(2Fo/m) (e^x)]Therefore, the terminal speed of the block as x approaches infinity isvt = [(2Fo/m) ∞]^(1/2) = ∞Therefore, the block does not have a terminal speed.
About Potential energyPotential energy is energy that affects objects because of the position of the object, which tends to go to infinity with the direction of the force generated from the potential energy. The SI unit for measuring work and energy is the Joule. What are the uses of potential energy? Potential energy is energy that is widely used to generate electricity. Even so, there are two objects that are used to store potential energy. These objects, namely water and fuel, are used to store potential energy. In general, water can store potential energy like a waterfall.
Learn More About Potential energy at https://brainly.com/question/14427111
#SPJ11
The half-life of a + meson at rest is 2.5 × 10−8 s. A beam of + mesons is generated at a point 15 m from a detector. Only ¼ of the + mesons live to reach the detector. What is the speed of the + mesons?
The speed of the + mesons is 2.401 x [tex]10^8[/tex] m/s.
Find the speed of the + mesons, we can use the concept of decay and the formula for half-life.
The half-life (t₁/₂) of a particle is the time it takes for half of the particles in a sample to decay.
that the half-life of the + meson is 2.5 × [tex]10^{(-8)[/tex] s and only 1/4 of the + mesons live to reach the detector.
we can determine the time it takes for 3/4 of the + mesons to decay, which is the time it takes for the + mesons to travel from the point of generation to the detector.
Denote the time it takes for 3/4 of the + mesons to decay as t.
Using the half-life formula, we can relate the remaining fraction of particles to the time:
[tex](1/2)^{(n)[/tex] = remaining fraction
where n is the number of half-lives.
We have 3/4 of the + mesons remaining, which corresponds to [tex](1/2)^{(n)[/tex]= 3/4. Solving for n:
[tex](1/2)^{(n)[/tex] = 3/4
n = log2(3/4)
Using logarithmic properties, we can rewrite n as:
n = log2(3) - log2(4)
n = log2(3) - 2
each half-life is equal to 2.5 ×[tex]10^{(-8)[/tex]s, the total time (t) it takes for the + mesons to travel from the point of generation to the detector can be expressed as:
t = n * t₁/₂
t = (log2(3) - 2) * 2.5 × 10^(-8) s
We can calculate the distance traveled by the + mesons using the formula:
distance = speed * time
The distance traveled by the + mesons is 15 m, and the time is t. Therefore, we can solve for the speed:
speed = distance / time
speed = 15 m / [(log2(3) - 2) * 2.5 × [tex]10^{(-8)[/tex]s]
Calculating the expression:
speed ≈ 2.401 x [tex]10^8[/tex]m/s
To know more about speed refer here
https://brainly.com/question/17661499#
#SPJ11