What does +430 degrees celsius feel like?

The correct formula for the compound that forms between aluminum (Al) and sulfur (S) is (d) Al₂S₃.

The correct option is E, none of the above.

The reaction between aluminum (Al) and sulfur (S) is an example of a chemical reaction known as a combination or synthesis reaction. In this reaction, aluminum and sulfur combine to form a

.

The chemical equation for the reaction is:

2Al + 3S → Al₂S₃

Aluminum has a 3+ charge (Al³⁺) and sulfur has a 2- charge (S²⁻). In order to balance the charges, two aluminum ions (Al³⁺) are needed to combine with three sulfur ions (S²⁻), resulting in the formula Al₂S.

Learn more about compounds at: https://brainly.com/question/14782984

#SPJ1

In chemistry, the actual yield refers to the quantity of a product that is obtained during an experiment or a chemical reaction. The theoretical yield, on the other hand, refers to the maximum amount of product that can be obtained from a given amount of reactant, assuming the reaction proceeds to completion and there are no losses due to factors such as side reactions or incomplete conversion of reactants.

The percentage yield is the ratio of the actual yield to the theoretical yield, expressed as a percentage.

For example, consider the combustion of 10.0 grams of methane gas ([tex]CH_4[/tex]) in excess oxygen to produce carbon dioxide [tex](CO_2[/tex]) and water ([tex]H_2O[/tex]):

[tex]CH_4[/tex] + 2O2 → [tex]CO_2[/tex] + [tex]2H_2O[/tex]

The balanced chemical equation shows that one mole of CH4 reacts with two moles of O2 to produce one mole of CO2 and two moles of [tex]H_2O[/tex]. Therefore, the theoretical yield of CO2 is calculated as follows:

10.0 g [tex]CH_4[/tex] × (1 mol [tex]CH_4[/tex]/16.0 g [tex]CH_4[/tex]) × (1 mol [tex]CO_2[/tex]/1 mol CH4) × (44.0 g [tex]CO_2[/tex]/1 mol[tex]CO_2[/tex]) = 27.5 g [tex]CO_2[/tex]

If the actual yield of [tex]CO_2[/tex] obtained from the reaction is 23.5 g, the percentage yield can be calculated as follows:

Percentage yield = (23.5 g CO2/27.5 g CO2) × 100% = 85.5%

For more question actual yield

https://brainly.com/question/20884766

#SPJ8

Answer:

In Thomas Cole's painting "The Oxbow," Thomas Cole, the artist, shows himself sitting in the landscape while painting it.

Explanation:

In the painting called "The Oxbow" by Thomas Cole, the artist actually put himself in the picture. He's sitting right in the middle of the landscape, just like he placed himself in the painting, as if taking a selfie while working on it. It's like he took a snapshot of himself while he was working on the painting. This shows how much he cared about creating the artwork and how he felt a personal connection to the beautiful scenery. It's really fascinating because it gives us a glimpse into how he saw himself as an artist and how he wanted to capture the incredible beauty of nature through his art.

HAZWOPER training and certification recognize:

The correct option is both A and C

HAZWOPER (Hazardous Waste Operations and Emergency Response) training and certification recognize that a large number of victims (as much as 80%) in hazardous waste incidents or emergencies will self-present or be self-referred for medical treatment.

Additionally, HAZWOPER training acknowledges that victims may use any entrance they can access at a hospital, not just the emergency department entrance.

This is because individuals affected by hazardous materials may arrive at different areas of the hospital seeking medical assistance.

Therefore, option d. Both A and C are correct statements regarding the recognition of HAZWOPER training and certification.

Learn more about HAZWOPER at: https://brainly.com/question/31561828

#SPJ1

-173 degrees Celsius is an extremely frigid temperature, and it is beyond the freezing point of most substances. At this temperature, any exposed skin or tissue would almost instantly freeze, leading to severe frostbite or even the formation of ice crystals within the body. Breathing would be difficult and potentially dangerous, as the extremely cold air could cause damage to the respiratory system. In such extreme cold, metal objects may become brittle and break, and liquids would freeze rapidly. Overall, -173 degrees Celsius would feel unbearable and life-threatening.

At -173 degrees Celsius, the human body would not be able to withstand the extreme cold without proper insulation and protection. The cold would penetrate through clothing and any exposed skin, rapidly extracting heat from the body. Within seconds, the body would start experiencing pain, numbness, and tingling sensations as frostbite sets in. The extreme cold would cause blood vessels to constrict, impairing blood flow and oxygen supply to the extremities.

As a result, frostbite, tissue damage, and hypothermia would occur rapidly. Breathing in such cold temperatures would be challenging, as the cold air could cause constriction of the airways and potentially damage the lungs. In summary, -173 degrees Celsius would be an inhospitable and life-threatening environment that would quickly lead to severe frostbite, tissue damage, and potentially death.

for such more questions on temperature

https://brainly.com/question/4735135

#SPJ8

The units for atomic mass are atomic mass units (amu).  the atomic mass of copper for this location is 63.55 amu.

The chemical symbol Cu stands for copper. Copper is a soft, malleable, ductile metal that is a good conductor of heat and electricity. Copper is one of the most widely used metals in electrical and electronic equipment due to its superior conductivity and non-corrosive properties. This metal is widely used in wiring, roofing, plumbing, and electronic applications. Its atomic mass is 63.55 amu.The atomic mass of copper for this location can be determined using the following formula:

Atomic mass = (mass of isotope 1 x relative abundance of isotope 1) + (mass of isotope 2 x relative abundance of isotope 2)The atomic mass of copper for this location

= (62.93 x 0.6915) + (64.93 x 0.3085) = 63.55 amu

For more question atomic mass

https://brainly.com/question/30402000

#SPJ8

The mass of the excess reagent remaining after completion of reaction, given that 8 g of magnesium is heated with 8 g of phosphorous is 0.98 g

First, we shall obtain the mass of the excess reagent that reacted. This is shown below:

6Mg + P₄ -> 2Mg₃P₂

From the balanced equation above,

145.8 g of Mg reacted with 124 g of P₄

Therefore,

8 g of Mg will react with = (8 × 124) / 145.8 = 7.02 g of P₄

Finally, we shall obtain the mass of the excess reagent remaining after the reaction. Details below:

Mass of excess reagent, P₄ remaining = Mass given - mass reacted

= 8 - 7.02

= 0.98 g

Thus, the mass of the excess reagent remaining after the reaction is 0.98 g

Learn more about mass of excess reagent:

https://brainly.com/question/29117366

#SPJ1

Of the following, the true statement about the Lewis structure is drawn for [tex]CS_{2}[/tex] is c) Carbon makes two double covalent bonds

In the case of [tex]CS_{2}[/tex], carbon (C) is indeed in the middle of the molecule (option a). This is because carbon is less electronegative than sulfur (S), and the less electronegative element is typically placed in the center of the Lewis structure.

Each sulfur atom (S) shares six electrons with the carbon atom (C), not four (option b). Carbon forms double bonds with each sulfur atom, resulting in a total of four shared electrons between carbon and each sulfur atom (option c). This arrangement allows carbon and sulfur to achieve an octet of electrons around each atom.

Therefore, the correct answer is option c) Carbon makes two double covalent bonds. The other statements, options a), b), d), and e), are not entirely accurate based on the Lewis structure of [tex]CS_{2}[/tex]. Therefore, Option C is correct.

Know more about covalent bonds here:

https://brainly.com/question/3447218

#SPJ8

The claim that cold water boils faster than hot water is not true. The reason why this misconception may have emerged is likely due to a misunderstanding or misinterpretation of certain observations. However, there is no scientific evidence supporting this claim.

One possible reason for this misconception is the notion that hot water takes longer to reach its boiling point because it starts at a higher temperature. When comparing hot and cold water in terms of reaching the boiling point from room temperature, the cold water may appear to boil faster.

However, this is simply because the hot water has already gained a head start in terms of temperature. In reality, once both liquids reach their respective boiling points, the hot water will boil first.

Scientifically, the boiling point of water is determined by its temperature and pressure. Under normal atmospheric conditions, the boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit). Heating water raises its temperature, and once it reaches 100 degrees Celsius, it transitions into the gaseous state. The initial temperature of the water does not affect the boiling point itself.

In conclusion, the claim that cold water boils faster than hot water is a misconception. It likely arose from a misinterpretation of observations, and there is no scientific evidence to support this claim. The boiling point of water is solely determined by its temperature and pressure, regardless of whether the water is initially hot or cold.

for such more questions on evidence

https://brainly.com/question/6273210

#SPJ8

The number of moles of carbon (C) in the sample can be determined using its molar mass. The molar mass of carbon is approximately 12.01 g/mol. To calculate the number of moles, we divide the mass of carbon in the sample by its molar mass. In this case, the sample contains 7.90 grams of carbon. Therefore, the number of moles of carbon in the sample is:

7.90 g C / 12.01 g/mol = 0.657 mol C

The molar mass is the mass of one mole of a substance. In this case, the molar mass of carbon is 12.01 g/mol. By dividing the mass of carbon in the sample (7.90 g) by its molar mass, we can calculate the number of moles. This calculation is done because moles are a convenient unit for comparing different elements and compounds in chemical reactions. \The result of 0.657 moles of carbon indicates that there are 0.657 times Avogadro's number (6.022 x 10^23) of carbon atoms in the sample. This information is useful for determining the empirical formula, which represents the simplest whole number ratio of atoms in a compound. To calculate the empirical formula, we would also need to determine the number of moles of sulfur (S) in the sample and find the ratio of the two elements.

In summary, there are approximately 0.657 moles of carbon in the given sample.

for such more questions on moles

https://brainly.com/question/29367909

#SPJ8

Ribosomes are attached to the membrane of the ER, making it “rough.” The RER is also attached to the nuclear envelope that surrounds the nucleus. This direct connection between the perinuclear space and the lumen of the ER allows for the movement of molecules through both membranes.Answer:

Explanation:

TRUST

In the balanced equation [tex]2C_{2} H_{6}[/tex] + [tex]7 O_{2}[/tex] --> [tex]4 CO_{2}[/tex] + [tex]6H_{2}O[/tex] if 21 g of [tex]C_{2} H_{6}[/tex] reacts with 32 g O₂, C₂H6 is the limiting reactant.

To determine the limiting reactant, we need to compare the amount of each reactant to the stoichiometric ratio in the balanced equation.

Let's calculate the number of moles for each reactant using their molar masses:

For [tex]C_{2} H_{6}[/tex] (ethane):

Molar mass of [tex]C_{2} H_{6}[/tex] = 2(12.01 g/mol) + 6(1.01 g/mol) = 30.07 g/mol

Number of moles of C₂H6 = 21 g / 30.07 g/mol ≈ 0.698 mol

For O₂ (oxygen):

Molar mass of O₂ = 2(16.00 g/mol) = 32.00 g/mol

Number of moles of O₂ = 32 g / 32.00 g/mol = 1.00 mol

Next, we compare the moles of each reactant to the stoichiometric ratio in the balanced equation:

2 moles of [tex]C_{2} H_{6}[/tex] react with 7 moles of O₂ to produce 4 moles of CO₂ and 6 moles of H₂O.

From the given amounts, we have:

0.698 mol [tex]C_{2} H_{6}[/tex] and 1.00 mol O₂.

Using the stoichiometric ratio, we can calculate the expected amount of CO₂ and H₂O produced for each reactant:

For C₂H6:

Expected moles of CO₂ = 0.698 mol C₂H6 * (4 mol CO₂ / 2 mol C₂H6) = 1.396 mol CO₂

For O₂:

Expected moles of CO₂ = 1.00 mol O₂ * (4 mol CO₂ / 7 mol O₂) ≈ 0.571 mol CO₂

Comparing the expected moles, we see that the calculated amount of CO₂ is greater when used [tex]C_{2} H_{6}[/tex] as the limiting reactant. Therefore, the limiting reactant in this reaction is [tex]C_{2} H_{6}[/tex].

Know more about the Balanced equation here:

https://brainly.com/question/13451900

#SPJ8

The empirical formula of the compound is C₂H₁₆S₂N₃O.

The moles of each element is as follows::

For CO₂:

Carbon (C) has a molar mass of 12.01 g/mol.

Oxygen (O) has a molar mass of 16.00 g/mol.

Moles of C in CO₂ = 2.08 g / 12.01 g/mol = 0.173 moles

Moles of O in CO₂ = 2.08 g / 16.00 g/mol = 0.130 moles

For H₂O:

Hydrogen (H) has a molar mass of 1.01 g/mol.

Oxygen (O) has a molar mass of 16.00 g/mol.

Moles of H in H₂O = 1.28 g / 1.01 g/mol = 1.27 moles

Moles of O in H₂O = 1.28 g / 16.00 g/mol = 0.080 moles

For SO₃:

Sulfur (S) has a molar mass of 32.06 g/mol.

Oxygen (O) has a molar mass of 16.00 g/mol.

Moles of S in SO₃ = 4.77 g / 32.06 g/mol = 0.149 moles

Moles of O in SO₃ = 4.77 g / 16.00 g/mol = 0.298 moles

For HNO₃:

Hydrogen (H) has a molar mass of 1.01 g/mol.

Nitrogen (N) has a molar mass of 14.01 g/mol.

Oxygen (O) has a molar mass of 16.00 g/mol.

Moles of H in HNO₃ = 3.48 g / 1.01 g/mol = 3.45 moles

Moles of N in HNO₃ = 3.48 g / 14.01 g/mol = 0.248 moles

Moles of O in HNO₃ = 3.48 g / 16.00 g/mol = 0.217 moles

The simplest whole-number ratio of the elements will be:

Carbon: 0.173 moles / 0.080 moles ≈ 2.16

Hydrogen: 1.27 moles / 0.080 moles ≈ 15.88

Sulfur: 0.149 moles / 0.080 moles ≈ 1.86

Nitrogen: 0.248 moles / 0.080 moles ≈ 3.10

Oxygen: 0.080 moles / 0.080 moles = 1

Therefore, the empirical formula is C₂H₁₆S₂N₃O.

Learn more about empirical formulas at: https://brainly.com/question/1603500

#SPJ1

The final broth temperature will be approximately 38.4°C.

When mixing two substances with different temperatures, we can use the principle of conservation of energy. The energy lost by the hot substance (broth) is equal to the energy gained by the cold substance (water), assuming no energy is lost to the surroundings. This can be expressed using the equation:

Q_lost = Q_gained

The energy lost by the broth can be calculated using the formula:

Q_lost = m_broth * c_broth * (T_final - T_initial)

where m_broth is the mass of the broth, c_broth is its specific heat capacity, T_final is the final temperature, and T_initial is the initial temperature of the broth.

Similarly, the energy gained by the water can be calculated using:

Q_gained = m_water * c_water * (T_final - T_initial)

Since the two substances reach thermal equilibrium, we can set Q_lost equal to Q_gained:

m_broth * c_broth * (T_final - T_initial) = m_water * c_water * (T_final - T_initial)

Plugging in the given values and solving for T_final, we find that the final temperature of the broth is approximately 38.4°C.

for such more questions on temperature

https://brainly.com/question/4735135

#SPJ8

The mass of the solid aluminum that forms are 192.73 grams

To determine the mass of solid aluminum that forms, we need to use stoichiometry and the balanced chemical equation for the reaction between magnesium and aluminum nitrate.

The balanced chemical equation is:

3 Mg + 2 Al([tex]NO_{3}[/tex])3 → 3 Mg([tex]NO_{3}[/tex])2 + 2 Al

The equation shows that 3 moles of magnesium react with 2 moles of aluminum to produce 2 moles of aluminum nitrate.

To calculate the mass of solid aluminum, we need to know the amount of magnesium used. Given that the volume of the magnesium is 150.0 mL and its density is 1.738 g/cm³, we can calculate the mass of magnesium using the formula:

Mass = Volume × Density

Mass of magnesium = 150.0 mL × 1.738 g/cm³ = 260.7 g

Now, using the molar mass of magnesium (24.31 g/mol) and the molar ratio from the balanced equation, we can determine the moles of magnesium used:

Moles of magnesium = Mass of magnesium / Molar mass of magnesium

= 260.7 g / 24.31 g/mol

= 10.72 mol

According to the stoichiometry of the balanced equation, the ratio of moles of magnesium to moles of aluminum is 3:2. Therefore, the moles of aluminum formed will be:

Moles of aluminum = (2/3) × Moles of magnesium

= (2/3) × 10.72 mol

= 7.15 mol

Finally, we can calculate the mass of solid aluminum using its molar mass (26.98 g/mol):

Mass of aluminum = Moles of aluminum × Molar mass of aluminum

= 7.15 mol × 26.98 g/mol

= 192.73 g

Therefore, the mass of the solid aluminum that forms is approximately 192.73 grams.

Know more about the Balanced chemical equation here:

https://brainly.com/question/13451900

#SPJ8