Answer:
1. Carbon is very special because it can form so many compounds
2. Many carbon-based compounds are not attracted to water and so in general do not dissolve in water. As a result, water alone cannot be used to remove grease or oil from a surface, nor will water dissolve our skin, because all of these things are carbon compounds.
3. Carbon can also link together in long chains or rings, carbon to carbon to carbon to carbon and so on.
Explanation:
Calculate the pressure (in atm) exerted by 1.82 moles of a gas in a steel vessel of volume 5.43 l at 69.50 c.
The pressure in atm is 6.8.
Calculation,
According to ideal gas law,
PV = nRT ..(i)
P is pressure = ?V is volume = 5.43 Ln is number of moles = 1.82 moles T is temperature = 69.50°C = 69.50°C + 278 K = 247.50 KR is universal gas constant = 0.082 atm L/K molPutting the value of all given data in equation (i) we get,
P×5.43 L = 1.82 moles ×247.50 K × 0.082 atm L/K mol
P = 1.82 moles ×247.50 K × 0.082 atm L/K mol /5.43 L = 6.8 atm
Learn about pressure,
https://brainly.com/question/14760196
#SPJ4
Any request or distribution of phi should contain only the minimum amount of phi required to complete the intended task. True or false?.
True
The bare minimum required standard
The minimal necessary standard restricts uses, disclosures, and requests for PHI to the bare minimum amount required to fulfil the use's or disclosure's intended purposes.
What is HIPAA Minimum necessary standard ?Under the Privacy Rule's Minimum Necessary Standard, covered entities are required to take all necessary precautions to ensure that protected health information (PHI) is only accessed as much as is required to carry out the duties at hand.
When a health care provider seeks something or discloses something to them for medical treatment, the minimum necessary criterion does not apply. Additionally, it does not apply to disclosures or uses made to an individual or with that person's consent.In order to reduce the possibility of a breach or employee wrongdoing, this guideline aims to establish the precedent of handling PHI as little as feasible.Learn more about HIPAA here:
https://brainly.com/question/8109025
#SPJ4
When adjusted for any changes in δh and δs with temperature, the standard free energy change δg∘t at 600 k is equal to 1. 4×10^5j/mol. Calculate the equilibrium constant at 600 k.
The standard free energy change ΔG° at 600 K is equal to 1. 4×[tex]10^5[/tex]J/mol then the equilibrium constant at 600K is 0 .
Calculation ,
ΔG° = - RT㏑Kp
Where ΔG° = standard free energy change = 1. 4×[tex]10^5[/tex]J/mol
R = universal gas constant = 8.3 J / K mol
T = temperature = 600K
Kp = equilibrium constant
Now putting the value of all data in equation (i) we get ,
1. 4×[tex]10^5[/tex]J/mol = - 8.3 J / K mol × 600K ㏑Kp
- 1. 4×[tex]10^5[/tex]J/mol /8.3 J / K mol × 600K = ㏑Kp
㏑Kp = - 6972×[tex]10^5[/tex]
Kp = 0
To learn more about standard free energy change please click here ,
https://brainly.com/question/13625901
#SPJ4
Increased total serum lactic dehydrogenase (LD) activity, confined to fractions 4 and 5 is most likely to be associated with: A. Pulmonary infarction B. Hemolytic anemia C. Myocardial infarction D. Acute viral hepatitis
D.Acute Viral Hepatitis
inflammation of the liver caused by infection with one of the five hepatitis viruses
Hope it helps (≧∇≦)/
1) Calculate the empirical formula for a chemical compound that gives the following analysis: 66.6 g titanium and 33.4 g oxygen.
a) Ti_2O_3
b) Ti_2O
c) TiO_3
d) Ti_2
2) The empirical formula for a compound shows the symbols of the elements with subscripts indicating what?
a) actual numbers of atoms in a molecule
b) number of moles of the compound in 100 g
c) smallest whole-number ratio of the atoms
d) atomic masses of each element
3) In the tin oxide laboratory activity, what was the color of the vapor emitted when the nitric acid was added to the tin?
a) orange-brown
b) pink
c) green
d) blue
4) What is the empirical formula for a compound that is 36.6 percent potassium, 33.2 percent chlorine, and 29.9 percent oxygen?
KClO_2
KClO_3
K_2Cl_2O
K_2Cl_2O_5
5) What is the empirical formula for a compound that is 43.6 percent phosphorus and 56.4 percent oxygen?
P_3O_7
PO_3
P_2O_3
P_2O_5
1. The empirical formula of the compound is Ti₂O₃
2. The correct answer to the question is: smallest whole-number ratio of the atoms (Option C)
3. The correct answer to the question is: orange-brown (Option A)
4. The empirical formula of the compound is KClO₂
5. The empirical formula of the compound is P₂O₅
1. How to determine the empirical formulaTi = 66.6 gO = 33.4 gEmpirical formula =?Divide by their molar mass
Ti = 66.6 / 48 = 1.3875
O = 33.4 / 16 = 2.0875
Divide by the smallest
Ti = 1.3875 / 1.3875 = 1
O = 2.0875 / 1.3875 = 3/2
Multiply by 2 to express in whole number
Ti = 1 × 2 = 2
O = 3/2 × 2 = 3
Thus, the empirical formula of the compound is Ti₂O₃
2. What is empirical formula?This is the simplest formula of a compound which shows the smallest whole number ratio of the atoms present in the compound
With the above definition, we can conclude that the correct answer to the question is: smallest whole-number ratio of the atoms (Option C)
3. What colour is shown when nitric acid is added?In the tin oxide laboratory activity, the colour of the vapor emitted when nitric acid is added to the tin is: orange-brown
NOTE: This colour is visible when we carryout the practical experiment
Thus, the correct answer to the question is orange-brown (Option A)
4. How to determine the empirical formulaK = 36.6%Cl = 33.2%O = 29.9%Empirical formula =?Divide by their molar mass
K = 36.6 / 39 = 0.9385
Cl = 33.2 / 35.5 = 0.907
O = 29.9 / 16 = 1.8688
Divide by the smallest
K = 0.9385 / 0.907 = 1
Cl = 0.907 / 0.907 = 1
O = 1.8688 / 0.907 = 2
Thus, the empirical formula of the compound is KClO₂
5. How to determine the empirical formulaP = 43.6%O = 56.4%Empirical formula =?Divide by their molar mass
P = 43.6 / 31 = 1.406
O = 56.4 / 16 = 3.525
Divide by the smallest
P = 1.406 / 1.406 = 1
O = 3.525 / 1.406 = 5/2
Multiply by 2 to express in whole number
P = 1 × 2 = 2
O = 5/2 × 2 = 5
Thus, the empirical formula of the compound is P₂O₅
Learn more about empirical formula:
https://brainly.com/question/24297883
#SPJ1
100 POINTS - is air trapped in a jar a compound, element, homogeneous mixture or heterogeneous mixture
Answer:
homogenous mixture
Explanation:
homogenous mixtures appear in one phase and have even particle distribution.
Answer:
Air is indeed a homogeneous mixture of dinitrogen, dioxygen, carbon dioxide and a few other gases. All of the gases are in the same phase, and thus constitute a homogeneous mixture.
Explanation:
hope it helps you10 mL of 2(M) NaOH solution is added to 200 mL of 0.5 (M) of NaOH solution. What is the final concentration?
Hello its me Sanya yadav
Prove the following:V=U + AT
We know that,
acceleration (a) = final velocity(V)-initial velocity(U)/ Time taken(T)
Calculate the number of atps generated by completely oxidizing one molecule of tripalmitoylglycerol into co2 and h2o ?
The number of atps generated is 330 ATP
What is atps?
At the cellular level, energy is used and stored as adenosine triphosphate (ATP). Adenine, ribose, and three serially bound phosphate groups make up the structure of ATP, which is a nucleoside triphosphate.
Glycerol provided us with 2 ATP and 2 NADH. In b-oxidation, we obtained 8 NADH and 8 FADH from each fatty acid, but since there were 3 fatty acids, we also produced 24 NADH and 24 FADH. We used 24 acetyl-CoA molecules, which were converted into 24 ATP, 24 FADH, and 72 NADH molecules by the citric acid cycle. You should obtain the same figures after adding everything up.
80 NADH x 3 ATP/NADH = 240 ATP
32 FADH x 2 ATP/FADH = 64 ATP
102 + 64 + 26 ATP = 330 ATP.
to learn more about ATPs go to - https://brainly.com/question/22785248
#SPJ4
C4h5n(aq) h2o(l)⇌c4h5nh (aq) oh−(aq) express your answers as chemical formulas. enter your answers in the order given in the question separated by commas
In aqueous solutions, the hydrogen ion, also known as the hydronium ion, is a Bronsted-Lowry acid, while the hydroxide ion is a base as a result of the self-dissociation reaction.
[tex]C_4H_5N(aq) + H_2O(l)[/tex] ⇄ [tex]C_4H_5NH (aq) + OH^-(aq)[/tex]
[tex]Bronsted-\\Lowry Acid[/tex] [tex]Conjugate Acid[/tex]
Brønsted–Lowry acid-base theory:Any species that may transfer a proton (H+) to another molecule is a Brnsted-Lowry acid. Any species that can take a proton from another molecule is a Brnsted-Lowry base. In essence, a Brnsted-Lowry base is a proton acceptor (PA) and an acid is a proton donor (PD).
According to the Arrhenius theory, acids are defined as chemicals that dissociate in an aqueous solution to produce hydrogen ions (H+), whereas bases are defined as substances that produce OH (hydroxide ions).
The hydrogen ion, or hydronium ion, is a Brønsted–Lowry acid in aqueous solutions, and the hydroxide ion is a base, by virtue of the self-dissociation reaction.
Learn more about Brnsted-Lowry here:
https://brainly.com/question/12377772
#SPJ4
What is the molality of phosphoric acid, h3po4, in a solution prepared from 376 g of phosphoric acid and 1. 70×103 g of ethylene glycol, c2h4(oh)2?
The molality of phosphoric acid, h3po4, in a solution prepared from 376 g of phosphoric acid and 1. 70×103 g of ethylene glycol, c2h4(oh)2 is 2.25m.
Ethylene Glycol is known as C2H4 (OH)2.
It is used to prepare Antifreeze solution by adding water in it.
Given,
Mass of phosphoric acid = 376g
Mass of ethylene acid = 1.7 × 10 3g
Since ethylene glycol is in excess. So it is acts as a solvent and phosphoric acid acts as solute
As we know that,
Molar mass of phosphoric acid = 98g
Moles of phosphoric acid
= Given mass / Molar mass
=376 / 98
= 3.83
Molality is defined as the ratio of moles of solute to the mass of solvent.
Molality = Moles of solute / Mass of solvent
= 3.83 / 1.7 kg
= 2.25m.
Thus, we found that the molality of phosphoric acid is 2.25m.
learn more about molality:
https://brainly.com/question/26921570
#SPJ4
Assuming the salt is sodium chloride, what is the approximate molar concentration of salt in ocean water if the density of ocean water is 1.028 kg/l?
Molar concentration of Sodium chloride (NaCl) means the number of moles of sodium chloride present in 1L of water.
Molar mass of NaCl = Molar mass of Na + Molar mass of Cl
Molar mass of NaCl = 23 + 35.5
Molar mass of NaCl = 58.5g
∴ 1L of water contains 55.55 moles of water. Hence,
Mass of ocean water = 55.55 × 18 = 999.9g
Since, 1L of ocean water has a mass of 999.9g of which 3.5% is the salt.
hence, (999.9) (0.035) = 34.99g
So, No. of moles of NaCl = Mass of NaCl / 58g NaCl per mol
No. of moles of NaCl = 34.99/58.5
No. of moles of NaCl = 0.59 moles
So, Molar concentration or Molarity would be 0.59 moles present in 1L of solution.
Hence, Molarity or Molar Concentration = Moles of NaCl/ Volume of solution (in L)
Molarity = 0.59/1L
⇒ Molarity = 0.59M
Hence, the molarity is 0.59M
Learn more about Molarity here, https://brainly.com/question/8732513
#SPJ1
Determine the number of nh4 nh4 and co32−co32− ions required to form a neutral ionic compound
The number of NH₄⁺ NH₄⁺ and CO₃⁻² CO₃⁻² ions required to form a neutral ionic compound are 2 and 1 respectively.
A Neutral Ionic Compound means a compound that is made by both positively and negatively charged ions i.e. cations and anions respectively.
NH₄⁺ is called as Ammonium ion formed due to addition of H+ (Proton) in Ammonia and CO₃⁻² is called as Carbonate ion formed with a Trigonal Planar structure.
For a compound having NH₄⁺ and CO₃⁻², a neutral compound can be made by keeping the total charge on the compound to be zero.
Hence, Ammonium carbonate (NH₄) ₂CO₃ is a neutral compound formed by taking 2 NH₄⁺ and 1 CO₃⁻² ions.
So, for the formation of the Neutral compound i.e. Ammonium carbonate (NH₄) ₂CO₃ , 2 NH₄⁺ and 1 CO₃⁻² is needed.
Learn more about Neutral Ionic compounds here, https://brainly.com/question/13058663
#SPJ4
A chemist measures the solubility of lead(ii) bromide in water to be 2. 96 g/l. calculate the ksp value for the solid. the ksp value is ___________. group of answer choices
The solubility product, ksp of PbBr₂ is 2.102 × 10⁻⁶
What is solubility?The solubility of a solute is defined as the maximum amount of that solute that can be dissolved in a known quantity of solvent at a given temperature.
What is a solubility product?Some salts are sparingly soluble in a solvent. For them, we calculate the solubility product.
It is an equilibrium constant that defines the relationship between a solid and its respective ions in an aqueous solution in equilibrium.
The greater the solubility product, the greater the solubility and vice versa.
Here, the solubility of PbBr₂ = 2.96 g/l
Molar solubility of PbBr₂ = [tex]\frac{2.96}{molar mass of PbBr_2}[/tex] = 2.96/367 = 8.07 × 10⁻³
At equilibrium,
[tex]PbBr_2\rightarrow Pb^{2+} + 2Br^-[/tex]
1 mole of PbBr2 dissociates into 1 mole of Pb²⁺ ions and 2 moles of Br⁻
Let the molar concentration of Pb²⁺ be x, then the molar concentration of Br⁻ is 2x
Ksp = x.(2x)²
= 4x³
Substitute, x = 8.07 × 10⁻³
Ksp = 4 (8.07 × 10⁻³)³
= 2.102 × 10⁻⁶
Thus, The ksp of PbBr₂ is 2.102 × 10⁻⁶
Learn more about solubility product:
https://brainly.com/question/1419865
#SPJ4
In an electric current, the ___ particles flow or are pushed along a path
positive
negative
neutral
Which law states that the total pressure of a gas mixture is equal to the sum of the partial pressures of its individual gases?.
Dalton's law of partial pressures
The total pressure by a mixture of gases is equal to the sum of the partial pressures of each of the constituent gases.
What is John Dalton's law ?Dalton's law, which states that a gas mixture's overall pressure is equal to the sum of its component gases' partial pressures. The pressure that each gas would produce if it occupied the same volume of the mixture by itself at the same temperature is known as the partial pressure.
The pressure that each gas would produce if it occupied the same volume of the mixture at the same temperature alone is referred to as the partial pressure.Learn more about Dalton's law here:
https://brainly.com/question/14119417
#SPJ4
Aspirin is the common name for acetyl salicylic acid, C9H8O4. One tablet contains 0. 325 g of aspirin. How many moles of aspirin is this?
Answer:
.0017952905 mol
Explanation:
I hope this helps, I can't promise I got it right, please let me know haha!
A 0. 150 amp current is run through a solution of ni2 ions for 12. 2 hours. what mass of metal is deposited on the cathode?
The mass of nickel metal deposited on the cathode is 2.004 g.
What is electrolysis?When an ionic compound is decomposed into its elements by passing a direct electric current using a compound in its liquid form. The process is known as electrolysis.
At the cathode, cations are reduced and at the anode, anions are oxidized.
The main components used in the process of electrolysis are
electrolyte, electrodes,external power sourceCurrent passed through the solution, I = 0.150 A
Time, t = 12.2 hrs = 12.2×60×60 = 43920 sec
Charge, q = It = 0.150 × 43920 = 6588 C
At cathode,
[tex]Ni^{2+}(aq) + 2e^- \rightarrow Ni(s)[/tex]
Nickel metal deposited by (2×96487 C) = 58.7g
Nickel metal deposited by 6588 C = [tex]\frac{58.7 \times 6588 }{2\times96487}[/tex] = 2.004 g
Hence, The mass of nickel metal deposited on the cathode is 2.004 g.
Learn more about electrolysis:
https://brainly.com/question/25712870
#SPJ4
Calculate the molarity of the two solutions. The first solution contains 0.650 mol of NaOH in 1.35 L of solution.
Answer:
0.481 M
Explanation:
The molarity ratio looks like this:
Molarity = moles / volume (L)
Since you have been given both the mass and volume, you can plug them into the equation to find the molarity.
Molarity = moles / volume
Molarity = 0.650 moles / 1.35 L
Molarity = 0.481 M
When cyclohexene is subjected to mercuration in methanol and the resulting mixture is reduced with sodium borohydride, the major organic product is ________.
The primary organic product is a 1:1 mixture of enantiomeric ethers when cyclohexene is subjected to mercuration in methanol and the resulting mixture is reduced with sodium borohydride. The correct option is B.
What is cyclohexene?Cyclohexene is a hydrocarbon with the formula C₆H₁₀ . It has no color and a pungent scent. It is a necessary element in a number of industrial processes. It is not a stable compound.
One butadiene will exist in the s trans form rather than the s-cis form because the energy of s trans is lower than that of s-cis trans.
Thus, the correct option is B) a 1:1 mixture of enantiomeric ethers.
To learn more about cyclohexene, refer to the link:
https://brainly.com/question/6854548
#SPJ4
The question is incomplete. Your complete question is given below:
A) a meso ether.
B) a 1:1 mixture of enantiomeric ethers.
C) a meso diol.
D) a 1:1 mixture of enantiomeric diols.
E) methoxycyclohexane.
best answer gets marked as brainliest! list all of the properties of stainless steel spoon
Answer:
- Corrosion resistant
- High tensile strength (the maximum stress that a material can withstand while being stretched or pulled before breaking)
- Temperature resistant
- Easy formability and fabrication
- Low maintenance (long lasting)
- Attractive appearance
- Environmentally friendly (recyclable)
Answer:
See below
Explanation:
I suppose you could include these properties:
Specific heat = .5 J/g-C
Density =~ 7500 kg/m^3
melting point approx 1500 ° C
among others .....
An analytical chemist has determined by measurements that there are 8. 5 moles of magnesium in a sample of talc. how many moles of hydrogen are in the sample?
The moles of hydrogen in the talc sample are 5.67 moles.
Talc are the hydrous silicate minerals. The chemical formula of talc is Mg₃Si₄O₁₀(OH)₂.
From the formula it can be determined that there are: 3 moles of Mg, 4 moles of Si, 12 moles of O and 2 moles of H.
Moles are a type of SI unit of measurement of the amount of substance.
According to the question, magnesium = 8.5 moles
Also, 3 moles of Mg = 2 moles of H
Therefore, moles of H = 8.5 moles × (2 moles H / 3 moles Mg)
moles of H = 5.67 moles
To know more about moles, here
brainly.com/question/26416088
#SPJ4
Which spectroscopic tool would be best for distinguishing a sample of 1,2-dichloropropane from 1,2-dibromopropane?
The NMR spectroscopy will be used for distinguishing a sample of 1,2-dichloropropane from 1,2-dibromopropane.
A spectroscopic method for observing the local magnetic fields surrounding atomic nuclei seems to be nuclear magnetic resonance spectroscopy, also referred to as magnetic resonance spectroscopy as well as NMR spectroscopy.
The identification and study of organic molecules benefit greatly from nuclear magnetic resonance (NMR) spectroscopy. This type of spectroscopy has a straightforward underlying theory. Numerous atom types' nuclei behave like small magnets and frequently align themselves in magnetic fields.
Therefore, the NMR spectroscopy will be used for distinguishing a sample of 1,2-dichloropropane from 1,2-dibromopropane.
To know more about spectroscopy
https://brainly.com/question/5402430
#SPJ4
Which clinical finding represents a contraindication to the administration of nitroglycerin?
Represents a contraindication to the administration of nitroglycerin increased intracranial pressure
Nitroglycerin is a vasodilator that is primarily used to treat anginal chest discomfort. It is now licensed by the FDA for the acute alleviation of an attack or the acute prevention of angina pectoris caused by coronary artery disease.
Nitroglycerin is used to treat coronary artery disease-related angina (chest pain). This medication can also be used to treat an existing angina attack. Nitroglycerin is a common treatment for heart problems. It's the go-to medication for people suffering from angina pectoris, who take it as a sublingual tablet or an oral spray.
To learn more about nitroglycerin please visit -
https://brainly.com/question/6347387
#SPJ4
In a 45 minute road trip a vehicle emitted 16. 7 g of nitrogen dioxide (NO2) from its exhaust. What is the mass of nitrogen atoms in this amount of NO2?
When a 45-minute road trip a vehicle emitted 16.7 g of nitrogen dioxide (NO₂) from its exhaust then the mass of nitrogen atoms in this amount of NO₂ would be 5.082 grams.
What is a Chemical compound?The chemical compound is a combination of two or more either similar or dissimilar chemical elements.
for example, H₂O is a chemical compound made up of two oxygen atoms and a single hydrogen atom
The molecular mass of any compound is calculated by the sum of the mass of the individual atom
As given in the problem In a 45-minute road trip a vehicle emitted 16.7 g of nitrogen dioxide (NO₂) from its exhaust
The molecular mass of the NO₂ is the sum of the mass of the nitrogen atom and the oxygen atom.
The mass of the single nitrogen atom is 14, while the mass of the single oxygen atom is 16
the molecular mass of NO₂= mass of the N atom+2×(mass of O atom)
= 14 + 2×16
=46
As 46 grams of NO₂ contain 14 grams of Nitrogen
then 1 gram of NO₂ would contain 14/46 grams of Nitrogen
then 16.7 grams of NO₂ would contain (14/46×16.7) grams of Nitrogen
The mass of a nitrogen atom in 16.7 grams of NO₂ would be 5.082 grams
Learn more about a chemical compound
brainly.com/question/12166462
#SPJ4
Certain drugs, such as ssris, block the reuptake of a neurotransmitter into the presynaptic cell. what effect does this have onsynaptic communication?
Selective serotonin reuptake inhibitors (SSRIs) are drugs that are antidepressants. These blocks the reuptake of a neurotransmitter leading to increases in their activity in the synaptic cells.
What are neurotransmitters?Neurotransmitters are defined as the signaling molecules that are secreted by the nerve cells and act as signal transporter between the neurons and the other cells of the body.
The SSRIs class of drugs affects this neurotransmitter and blocks the pathway to the presynaptic cell. This, in turn, affects synaptic communication by increasing the amount of those SSRIs in the body and acting as a stimulant to treat various diseases.
Therefore, the SSRIs block the neurotransmitter and result in their effects.
Learn more about neurotransmitters here:
https://brainly.com/question/28138251
#SPJ4
The solubility KI is 50 g in 100 g of H2O at 20 °C. if 110 grams of ki are added to 200 grams of H2O ________
The solubility KI is 50 g in 100 g of H₂O at 20 °C. if 110 grams of ki are added to 200 grams of H₂O the solution will be saturated.
What is solubility?Solubility is a condition where the solute is fully dissolved in the solvent. When fully mixed with the solvent.
Given that 50 g of KI is added to 100 g of water at 20 °C it means 100 g of water can dissolve a maximum of 50 g of KCl.
1 g of water will dissolve an quantity of 0.5 g of KCl.
To assay for 200 g of water: 200 g of water can disintegrate a maximum of (0.5) x 200 g of KCl.
The maximum amount of KCl that will dissolve is 100 g
Actualised amount dissolved = 110 g
when Amount dissolved > Maximum solubility limit
110 g > 100 g
Thus, the solution is saturated.
To learn more about solubility, refer to the below link:
https://brainly.com/question/8591226
#SPJ4
How many moles of helium gas would it take to fill a balloon with a volume of 1000.0 cm 3when the temperature is 32 o C and the atmospheric pressure is 752 mm Hg?
The number of moles of the gas is 0.0396 moles.
What is the ideal gas equation?The ideal gas equation is used to determine the relationship between the variables; temperature, pressure, volume and the number of moles of a gas. We know that the gas laws are used to understudy the parameters that has to do with gases.
Thus;
Volume = 1000.0 cm 3 or 1 L
Gas constant = 0.082 atmLK-1Mol-1
Temperature = 32 o C + 273 K = 305 K
Pressure = 752 mm Hg or 0.99 atm
Thus;
PV = nRT
n = PV/RT
n = 0.99 atm * 1 L/0.082 atmLK-1Mol-1 * 305 K
n = 0.0396 moles
Learn more abut ideal gas equation:https://brainly.com/question/4147359
#SPJ1
What type of reaction is: iron + sulfur -> iron sulfide? A. Double Replacement B. Decomposition C. Synthesis D. Combustion
Answer:
Hi there. In this question, we are trying to classify this reaction type. What we see happening here is we're told that we have sulfur which is in its solid state and it is reacting with solid iron And they're going to produce solid Iron three sulfide. So that is going to be f. E two S. Three. And that is a solid. I know it was F. E two S. Three because the iron three tells us the charge on the iron is three plus and sulfur voice forms ions with a too negative charge. Therefore it has to be FE two S 3. We can balance this equation although that's not necessary for this problem. But it's kind of quick. So I'll go ahead and do that. Okay, but we want to know what type of reaction it is. So we're looking for a pattern here when we see an element sulfur, it's combining with another element iron and it's producing a compound. So only one product. Alright, so looking at this general reaction type, there's only one reaction type of those five listed there, there's only one reaction type that has just one product and that is a synthesis reaction. A synthesis reaction follows this pattern where we are taking two or more simpler substances and combining them to make more complex compounds. Alright, with the simplest synthesis being element plus element equals compound. So this would be a synthesis reaction. Thank you for asking a question. And I hope this was helpful
Answer:
It should be D) Combustion Reaction
sketch two amino acids side by side
The sketch of two amino acid side by side is given above.
What is amino acid?Amino acid is defined as the acid which contains two functional groups which are carboxylic group, -COOH and ammine group, -NH2.
When the two or more than two molecules of amino acids join together by forming peptide bond, they produces polypeptide chain or protein.
What is peptide bond?The bond which is present inbetween two amino acid is called a peptide bond.
The peptide bond is defined as a chemical bond which is formed inbetween the two or more molecules when nitrogen which is present in one amino acid react with the carbon of another amino acid by releasing a molecules of water.
Thus we concluded that the two amino acid bond by forming peptide bond.
learn more about amino acid or peptide bond :
https://brainly.com/question/11559138
#SPJ1