The voltage midway between two charges is 12 V, we can determine that the magnitude of the positive charge is greater than the magnitude of the negative charge (A) since the positive charge contributes more to the voltage.
The voltage between two charges is determined by the electric potential difference created by those charges. In this case, since the voltage midway between the charges is 12 V, it indicates that the positive charge contributes more to the voltage than the negative charge.
The voltage due to a point charge decreases as we move farther away from the charge. Therefore, if the voltage at a point is positive, it implies that the positive charge is dominating in creating the electric potential at that location.
If the magnitude of the negative charge were greater than the magnitude of the positive charge, the voltage would be negative at the midpoint, indicating a dominant contribution from the negative charge. However, since the given voltage is positive, it implies that the magnitude of the positive charge must be greater than the magnitude of the negative charge.
Learn more about voltage here:
https://brainly.com/question/13396105
#SPJ11
The difference in frequency between the first and the fifth harmonic of a standing wave on a taut string is f5 - f1 = 40 Hz. The speed of the standing wave is fixed and is equal to 10 m/s. Determine the difference in wavelength between these modes. 15 - 11 = 0.20 m O 15-21 = 5 m O 15-11 = -0.64 m 45- 21 = -0.80 m 25-21 -1.60 m
The difference in wavelength between the first and fifth harmonics of the standing wave on a taut string is -0.64 m.
In a standing wave on a taut string, the frequency of the wave is related to the wavelength and the wave speed.
The difference in frequency between the first (f1) and fifth (f5) harmonics is given as 40 Hz, and the wave speed is fixed at 10 m/s. We need to determine the difference in wavelength (Δλ) between these modes.
The relationship between frequency, wavelength, and wave speed is given by the equation λ = v/f, where λ is the wavelength, v is the wave speed, and f is the frequency.
For the first harmonic (n = 1), the wavelength is λ1 = v/f1, and for the fifth harmonic (n = 5), the wavelength is λ5 = v/f5.
To find the difference in wavelength, we subtract the two equations: Δλ = λ5 - λ1 = (v/f5) - (v/f1).
Substituting the given values, we have Δλ = 10 * (1/f5 - 1/f1) = 10 * (1/5 - 1/1) = 10 * (-0.8) = -0.64 m.
Therefore, the difference in wavelength between the first and fifth harmonics is -0.64 m. The negative sign indicates that the fifth harmonic has a shorter wavelength compared to the first harmonic.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
Suppose you have a 116−kg wooden crate resting on a wood floor. (μ
k
=0.3 and μ
s
=0.5) (a) What maximum force (in N) can you exert horizontally on the crate without moving it? N (b) If you continue to exert this force (in m/s
2
) once the crate starts to slip, what will the magnitude of its acceleration then be? ×m/s
2
The magnitude of the acceleration will be 2.9 m/s².
(a) Since the crate is at rest and we are moving it horizontally, the force of friction that will be acting on the crate is the static frictional force. The formula for the maximum force that can be exerted horizontally on the crate without moving it is given by;
F = μs
N, where F is the force, N is the normal force, and μs is the static friction coefficient.
μs is given as 0.5 in the question;
therefore, the maximum force that can be exerted without moving the crate F is;
F = μs
N = 0.5 mg
,where m is the mass of the crate, and g is the gravitational acceleration. Substituting the values given in the question;
F = 0.5(116 kg)(9.81 m/s²)
= 568 N
≈ 570 N
Therefore, the maximum force that can be exerted horizontally on the crate without moving it is 570 N.
(b) If you continue to exert this force once the crate starts to slip, what will the magnitude of its acceleration then be?The friction force that acts on a moving object is given by the formula;
f = μkN,where μk is the kinetic friction coefficient.
μk is given as 0.3 in the question. Therefore, once the crate starts to slip, the frictional force that will act on the crate is the kinetic frictional force. Using the formula;
F = ma, we can find the acceleration a of the crate when a force F is acting on it.
a = F/m, where F is the force acting on the crate and m is the mass of the crate.
Substituting the values given in the question;
F = μkN
= 0.3mg
= 0.3(116 kg)(9.81 m/s²)
= 341.212 N ≈ 341.2 N
The force F acting on the crate is 341.2 N. Therefore, the acceleration a of the crate will be;
a = F/m
= 341.2 N/116 kg
= 2.94 m/s²
≈ 2.9 m/s²
To learn more on static friction :
https://brainly.com/question/30031223
#SPJ11
What is the weight of a 63-kg astronaut on Earth? Express your answer using two significant figures.
What is the weight of a 63-k astronaut on the Moon (g = Express your answer using two significant figures. /s²
What is the weight of a 63-kg astronaut on Mars (g = 3.7m/s² )? Express your answer using two significant figures
What is the weight of a 63-kg astronaut in outer space traveling with constant velocity? Express your answer using one significant figure.
Weight of a 63-kg astronaut on Earth would be 618.03 N, weight of a 63-k astronaut on the Moon would be 101.88 N, weight of a 63-kg astronaut on Mars would be 233.1 N, weight of a 63-kg astronaut in outer space traveling with constant velocity would be zero.
Weight is the force exerted on an object due to gravity. The formula for weight is W = mg, where W is the weight, m is the mass, and g is the acceleration due to gravity. The weight of a 63-kg astronaut on Earth is given by:
W = mg
W = 63 kg x 9.81 m/s² = 618.03 N
To find the weight of a 63-kg astronaut on the moon, we need to use the acceleration due to gravity on the moon which is g = 1.62 m/s².
W = mg
W = 63 kg x 1.62 m/s² = 101.88 N
To find the weight of a 63-kg astronaut on Mars, we need to use the acceleration due to gravity on Mars which is g = 3.7 m/s².
W = mg
W = 63 kg x 3.7 m/s² = 233.1 N
In outer space, there is no gravity acting on the astronaut. Therefore, the weight of a 63-kg astronaut in outer space traveling with constant velocity is zero (0N).
Learn more about Weight at https://brainly.com/question/21272180
#SPJ11
Which of the statements are true? I The percent expansion of a sidewalk is greater for its length then its width. II Upon heating, objects expand equally in all directions. III A hole inside the face of a metal disk will decrease in diameter when the disk is heated. II \& III I \& II I II
The answer is II only. Upon heating, objects expand equally in all directions this statement is true. This is because the coefficient of thermal expansion is the same for all three dimensions of an object.
Statement I is false. When an object is heated, it expands equally in all directions. This means that the percent expansion will be the same for the length, width, and height of the object.
Statement II is true. This is because the coefficient of thermal expansion is the same for all three dimensions of an object.
Statement III is false. When a metal disk is heated, the hole inside the disk will expand as well. This is because the hole is made of the same material as the disk, and it will therefore expand at the same rate.
Therefore, the only statement that is true is statement II. So the answer is II only.
To learn more about thermal expansion click here
https://brainly.com/question/14092908
#SPJ11
Describe in as much detail as you can, an application either of a light dependent resistor or a thermistor. You must include clear use of the word, "resistance" in your answer. (3)
A light-dependent resistor (LDR) is commonly used in automatic outdoor lighting systems. Its resistance changes based on the amount of light falling on it, allowing it to detect changes in lighting conditions and activate or deactivate the lights accordingly.
A light-dependent resistor (LDR) is a type of resistor whose resistance varies with the intensity of light incident upon it. This property makes it useful in applications where light detection or measurement is required.
As the ambient light level decreases, such as in the evening or at night, the resistance of the LDR increases. This increase in resistance reduces the current flow, triggering the activation of the relay or transistor switch, which in turn powers on the outdoor lights.
By using an LDR in this way, the resistance of the LDR acts as a sensor for detecting changes in light intensity. It enables the automatic control of the lights, ensuring that they are turned on when needed (i.e., when it gets dark) and turned off when sufficient light is available. This application provides convenience, energy savings, and improved safety in outdoor lighting systems.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11
4. Consider an electric motor with a shaft power output of 20 kW and an efficiency of 88 percent. Determine the rate at which the motor dissipates heat to the room it motor operates at full load. In winter, this room is normally heated by a 2 kW resistance heater. Determine if it is necessary to turn the heater on when the motor runs at full load. E_in: Electrical energy E_out: Heat & Work heat will be dissipated by the electric motor (energy loss).
It is not necessary to turn the heater on when the motor runs at full load as the rate at which the motor dissipates heat is greater than the rate at which the room is heated.
Let us first compute the electrical energy in to electrical energy out using the efficiency of the motor:
Efficiency = Electrical energy out / Electrical energy in
88/100 = Electrical energy out / Electrical energy in
Electrical energy out = (88/100) × Electrical energy in
Electrical energy in = Shaft power output of the motor = 20 kW
So, electrical energy out = (88/100) × 20 = 17.6 kW
P = Electrical energy in - Electrical energy out
P = 20 - 17.6 = 2.4 kW
The heat dissipated by the motor to the room is the difference between the electrical energy in and the shaft power output. Therefore, the rate at which the motor dissipates heat to the room it operates in at full load is 2.4 kW.
During winter, the room is heated by a 2 kW resistance heater. Since the rate at which the motor dissipates heat is greater than the rate at which the room is heated, it is not necessary to turn the heater on when the motor runs at full load.
An electric motor has a shaft power output of 20 kW and an efficiency of 88%. The rate at which the motor dissipates heat to the room it operates in at full load is 2.4 kW.
During winter, the room is heated by a 2 kW resistance heater. Since the rate at which the motor dissipates heat is greater than the rate at which the room is heated, it is not necessary to turn the heater on when the motor runs at full load.
To learn more about heater, refer below:
https://brainly.com/question/11863285
#SPJ11
For a Young's double slit experiment, the slit separation (d) is controlled to be selected by a choice multiple of wavelength (lamda) for a monochromatic coherent source.a) For (i) d=100labda, and (ii) d=10000lamda Determine the angular separation between the central maximum and its adjacent maximum Please calculate for both the small angle AND non-small angle assumption noting that theta(m=0) = theta(0) = theta Your answer must be in radians b) At a slit-screen distance, D=50.0cm, calculate the distance between maxima on a screen for your small angle approximation results from part a)
A stock has an average historical return of 11.3 percent and a standard deviation of 20.2 percent. Which range of returns would you expect to see approximately two-thirds of the time? Please show work.
We can expect approximately two-thirds (68%) of the returns to fall within the range of approximately -8.9% to 32.5%.
To determine the range of returns that would be expected to occur approximately two-thirds of the time, we can use the concept of the normal distribution and the empirical rule.
According to the empirical rule, for a normal distribution:
Approximately 68% of the data falls within one standard deviation of the mean.
Approximately 95% of the data falls within two standard deviations of the mean.
Approximately 99.7% of the data falls within three standard deviations of the mean.
Given that the average historical return is 11.3% and the standard deviation is 20.2%, we can calculate the range of returns that would be expected to occur approximately two-thirds of the time as follows:
Calculate one standard deviation:
One standard deviation = 20.2% (standard deviation)
Determine the range within one standard deviation:
Lower bound = Average return - One standard deviation
Upper bound = Average return + One standard deviation
Lower bound = 11.3% - 20.2% = -8.9%
Upper bound = 11.3% + 20.2% = 32.5%
Therefore, we can expect approximately two-thirds (68%) of the returns to fall within the range of approximately -8.9% to 32.5%.
It's important to note that this calculation assumes a normal distribution of returns, which may not always hold true for stock market data. Additionally, past performance is not indicative of future results, so it's essential to consider other factors and perform a comprehensive analysis when making investment decisions.
To learn more about fall
https://brainly.com/question/29610799
#SPJ11
The J/ψ particle is a meson made up of cc quark-antiquark pair. This particle is discovered in proton-proton and electron-positron collisions.
i) A proton collides with a proton at rest. Calculate the threshold energy for the incoming proton for this reaction to occur. p + p → p + p + J/ψ
ii) An electron collides with a positron, each of which has the same energy and opposite momenta. Calculate the threshold energy for either of the particles. e + + e- → J/ψ
mJ/ψ = 3 GeV, τJ/ψ = 10-20s
In the given scenario, we are asked to calculate the threshold energy for two different collision processes involving the J/ψ particle The threshold energy represents the minimum energy required for the reaction to occur is comes out to be same in both case 2.7x[tex]10^-^1^0[/tex] J.
i) To calculate the threshold energy for the proton-proton collision, we need to consider the conservation of energy and momentum. Since one of the protons is at rest, the total momentum before the collision is zero. Therefore, the threshold energy is equal to the rest energy of the J/ψ particle:
Threshold energy = [tex]mJ/ψc^2[/tex] = (3 GeV)(3x[tex]10^8 m/s)^2[/tex] = 2.7x[tex]10^-^1^0[/tex] J
ii) For the electron-positron collision, we assume that both particles have the same energy and opposite momenta. Again, using conservation of energy and momentum, the threshold energy is equal to the rest energy of the J/ψ particle:
Threshold energy =[tex]mJ/ψc^2[/tex] = (3 GeV)(3x[tex]10^8 m/s)^2[/tex] = 2.7x[tex]10^-^1^0 J[/tex]
Both threshold energies calculated in the two scenarios are the same, as they correspond to the rest energy of the J/ψ particle.
Learn more about collision here:
brainly.com/question/25945297
#SPJ11
Problem 2 A potential difference of 1 V is applied to the ends of the copper having a resistance 10Ω for 3μs. How many electrons travel from one end of the wire to the end? - With solution
Approximately 1.875 x 10¹² electrons travel from one end of the copper wire to the other end.
The potential difference applied to the ends of copper with resistance 10Ω for 3μs is 1V. To find the number of electrons that travels from one end of the wire to the other end, we can use the equation:
I = Q/t
where I is current, Q is charge, and t is time.
But before we do that, let's determine the current using Ohm's law which is given by:V = IR where V is voltage, I is current, and R is resistance. Rearranging the equation gives:I = V/RSubstituting the given values gives:
I = 1 V / 10 ΩI = 0.1 A
Now that we have the current, we can use the equation:
I = Q/t
Rearranging the equation to make Q the subject gives:
Q = It
Substituting the values of I and t gives:Q = 0.1 A x 3 x 10⁻⁶ sQ = 3 x 10⁻⁷ C
The charge of an electron is -1.6 x 10⁻¹⁹ C.
So, the number of electrons that move is:
ne = Q/e
Where e is the charge of an electron which is 1.6 x 10⁻¹⁹ C.
Substituting the values of Q and e gives:
ne = (3 x 10⁻⁷ C) / (1.6 x 10⁻¹⁹ C)
ne = 1.875 x 10¹²
Therefore, approximately 1.875 x 10¹² electrons travel from one end of the copper wire to the other when a potential difference of 1 V is applied for 3 μs.
To know more about electrons click on below link :
https://brainly.com/question/32906792#
#SPJ11
Find the energy stored in the magnetic field
1. A 0.1m long solenoid with 4 turns/cm, a 1.0cm radius, and a current of 4.0 A.
2. A rectangular toroid with an inner radius of 0.1m, outer radius 0.14m, and a height of 0.02m. It is comprised of a total of 1000 windings and has a current of 1.25 A
3. An inductor with a potential difference of 55mV after 1.5s with a current that varies as I(t) = I0 − Ct. I0 = 10.0A, and C = 3A/s
Magnetic energy is the energy stored in the magnetic field generated by the electric current flowing in the coil. Energy is calculated as the energy stored per unit volume of the magnetic field.
The energy stored in the magnetic field is given by the following formula:U=1/2 LI²U = Magnetic energy stored, L = Inductance, I = CurrentThe magnetic energy stored in the following is given below:Solenoid = 2.51 × 10^-3 JToroid = 4.24 × 10^-3 JInductor = 18.750 JThe solenoid is of length 0.1m, 4 turns/cm, and 1.0 cm radius. The current is 4.0 A.The toroid has an inner radius of 0.1 m, an outer radius of 0.14 m, and a height of 0.02 m, with 1000 windings and a current of 1.25 A.The inductor has a potential difference of 55 mV after 1.5 s with a current that varies as I(t) = I0 - Ct. Where I0 = 10.0 A and C = 3 A/s.The magnetic energy stored in the solenoid is given by;U=1/2 LI² =1/2×0.4π²×10-6×4²×0.1×(4.0)² =2.51×10-3 JThe magnetic energy stored in the toroid is given by;U=1/2 L I² =1/2×π(0.14²-0.1²)×1000²×1.25²/(2×π)²×(0.02) =4.24×10-3 JThe magnetic energy stored in the inductor is given by;U=1/2 L I² =1/2×(10/3)×(10)²×(1/3)²×(1.5)² =18.750 JHence, the energy stored in the magnetic field is:Solenoid = 2.51 × 10^-3 JToroid = 4.24 × 10^-3 JInductor = 18.750 J.
To Learn more about Magnetic Click this!
brainly.com/question/33231486
#SPJ11
Points A [at (3, 6) m] and B [at (8, −3) m] are in a region where the electric field is uniform and given by E = 16i N/C, where i is a unit vector (of length 1) oriented along the positive x axis. What is the electric potential difference V(A) − V(B)? Group of answer choices +80 V - 80 V -60 V +60 V +50 V
The electric potential difference V(A) − V(B) is 80 V.
The electric potential difference V(A) − V(B) is 80 V.
The electric potential difference is calculated as follows:
V(A) - V(B) = - int_B^A E \cdot dr
where E is the electric field, dr is the displacement of the element in the electric field, and B and A are the two points between which we have to calculate the electric potential difference.
From the equation of electric field given,
E = 16i N/CDr for point A: dr_A = (8-3)\hat i +(-3-6)
hat j= 5\hat i-9\hat j
Dr for point B: dr_B = (3-8)\hat i +(6+3)\hat j
= -5\hat i+9\hat j
Now, we need to calculate the electric potential difference.
So, putting all the given values in the above formula, we have:
V(A) - V(B) = - \int_B^A E \cdot dr
V(A) - V(B) = - \int_B^A 16i N/C .
(5\hat i-9\hat j) m
V(A) - V(B) = - \int_B^A -80 Nm/C
V(A) - V(B) = 80 V
To learn more on electric field :
https://brainly.com/question/19878202
#SPJ11
a traffic light hangs from a cable tied to two other
cables fastened to a support as shown in the figure if the tensions
T1 = 400N the mass of the traffic light (in kg) is
Answer: 81.55 kg Traffic Light Hanging from a Cable Assuming that the traffic light is in static equilibrium, we can apply Newton's Second Law to solve for the mass of the traffic light. Let's consider the forces acting on the traffic light.
There are three forces acting on it: T1, T2, and the force due to the weight of the traffic light (W).T1 and T2 are the tensions in the cables, while W is the force due to the weight of the traffic light. Since the traffic light is not accelerating, these three forces must be balanced in all directions. Therefore, we can set up the following equations of equilibrium:
∑F_x = 0T2 = T1∑F_y = 0T2 + W = 0T1 + T2 = W
We can substitute T2 = T1 in the second equation and get T1 + T2 = W as T1 + T1 = W or 2T1 = W
Substituting T1 = 400N in the equation above, we get W = 800N.The weight of the traffic light is given by the formula:
W = mg where m is the mass of the traffic light and g is the acceleration due to gravity.
Substituting the values of W and g in the above equation, we get:800N = m(9.81m/s²)Solving for m, we get:
m = 81.55 kg
Therefore, the mass of the traffic light is 81.55 kg (rounded to two decimal places)
To know more about equilibrium please click :-
brainly.com/question/30694482
#SPJ11
A device operates at 120 V and has a resistance of 50.0ohms. a. What is the current of the device when operating? b. How much energy is converted to other forms of energy in a 3.0 min period?
To find the current of the device we can use Ohm's law which states that the current I, in a circuit is directly proportional to the voltage V, and inversely proportional to the resistance R.
Mathematically this is represented by the equation I = V/RWhere;
I = currentV
= voltageR
= resistanceGiven that the device operates at 120V and has a resistance of 50ohms, we can substitute these values into the Ohm's law equation to find the current:I = V/R
= 120/50
= 2.4ATherefore the current of the device when operating is 2.4A.
The amount of energy converted to other forms of energy in a 3.0 min period can be found using the formula for electrical power.P = VIWhere;
P = powerV
= voltageI
= currentWe can also use the formula below to find the amount of energy E converted in time T when given the power rating: E = PTTherefore, the energy E is given by:
E = PT
= VI TSubstituting the values of V and I that we obtained above we get:
E = VI T
= (120V)(2.4A)(3.0min x 60s/min)
= 20736JTherefore, the amount of energy converted to other forms of energy in a 3.0 min period is 20736 Joules.
To know more about device visit:
https://brainly.com/question/32894457
#SPJ11
Actual performance of a refrigerator is fess than the ideal due to a few factors. Which two of the following are such factors?
a. Friction in the compressor.
b. Quasi equilibrium process
c. Heat loss from the evaporator
d. Work done by compressor
The two factors that contribute to the actual performance of a refrigerator being less than the ideal are heat loss from the evaporator and work done by the compressor.
Refrigerators work on the principle of removing heat from the contents inside and transferring it to the surroundings, thus creating a cooling effect. However, in reality, the actual performance of a refrigerator is not able to achieve the theoretical maximum efficiency due to various factors.
One of the factors is heat loss from the evaporator. The evaporator is responsible for absorbing heat from the contents of the refrigerator. However, some amount of heat is inevitably lost to the surroundings, reducing the overall cooling effect. This heat loss can occur through insulation leaks or improper sealing of the refrigerator.
Another factor is the work done by the compressor. The compressor plays a crucial role in the refrigeration cycle by compressing the refrigerant gas, increasing its temperature and pressure. However, the compression process is not entirely efficient, and some work done by the compressor is converted into heat energy instead of being utilized for cooling. This reduces the overall efficiency of the refrigerator.
Factors like friction in the compressor and quasi-equilibrium processes also contribute to the deviation of actual performance from the ideal, but in this case, the two factors specifically mentioned are heat loss from the evaporator and work done by the compressor.
Learn more about Evaporator
brainly.com/question/28319650?
#SPJ11
A charged particle is moving through a constant magnetic field. Does the magnetic field do work on the charged particle? Select one: a. no, because the magnetic field is conservative b.no, because the magnetic force is always perpendicular to the velocity of the particle cno, because the magnetic force is a velocity-dependent force dyes, because the force is acting as the particle is moving through some distance eno, because the magnetic field is a vector and work is a scalar quantity
The correct answer is no, because the magnetic force is always perpendicular to the velocity of the particle.The magnetic field does not do any work on a charged particle moving through it, even though the magnetic field can influence the motion of the charged particle.
A magnetic field exerts a magnetic force on a charged particle in a magnetic field, which is always perpendicular to the direction of the velocity of the charged particle. Since the magnetic force is perpendicular to the velocity of the charged particle, the work done by the magnetic force is always zero, and thus the magnetic field does not do any work on the charged particle moving through it.
In other words, if a charged particle moves through a constant magnetic field, the magnetic field will not do work on the charged particle due to the nature of the magnetic force being perpendicular to the velocity of the charged particle. Hence, the answer is no, because the magnetic force is always perpendicular to the velocity of the path.
To know more about moving visit:
https://brainly.com/question/28424301
#SPJ11
Using Wien's Law, what is the maximum wavelength of light that a star with a temperature of 6500 Kelvin emits?
a. 0.000182 nm
b. 462 nm
c. 0.000154 nm
d. 400 nm
e. 316 nm
f. 0.000105 nm
g. 545 nm
h. 0.000118 nm
i. 353 nm
j. 0.000133 nm
Wien's Law states that as the temperature of a blackbody increases, the wavelength at which maximum energy is emitted decreases. This relationship is expressed mathematically by λ(max) = b/T, where b is Wien's constant, equal to 2.898 x 10^-3 meters-kelvin.
Therefore, to determine the maximum wavelength of light that a star with a temperature of 6500 Kelvin emits,
We must use this equation and plug in the appropriate values:λ(max) = 2.898 x 10^-3 meters-kelvin / 6500 Kelvinλ(max) = 4.4538461538461536 x 10^-7 meters.
We can convert this answer into nanometers by multiplying it by 10^9, which gives us:λ(max) = 445.3846153846154 nm.
Therefore, the maximum wavelength of light that a star with a temperature of 6500 Kelvin emits is approximately 445.4 nanometers. The correct option from the provided options is (g) 545 nm.
Learn more about Wien's Law here ;
https://brainly.com/question/1417845
#SPJ11
I just need help with Part 2. Part 1 is complete.
Part 1 of 2
To determine the distance to the galaxy, you need to use the magnitude-distance formula.
d = 10(m − M + 5 )/5
Use the given apparent magnitude and the known absolute magnitude for the supernova to solve for the distance.
d = 10(m − M + 5 )/5
Which gives us the distance in parsecs (1 Mpc = 106 pc).
d = .891 Mpc <----- Correct Answer
Part 2 of 2
Now we can use the Hubble Law to determine the recession velocity or the velocity the galaxy appears to be moving away from us.
Vr = H0d
Where
H0 = 70 km/s/Mpc.
Vr = ____________ km/s
The distance of the galaxy is 0.0836 Mpc and the recession velocity is 5.852 km/s.
The Hubble law can be defined as a relation between the recession velocity (Vr) of a galaxy and its distance (d) from Earth. It is given by:
Vr = H0d
where
H0 = 70 km/s
Mpc and Vr is the recession velocity.
For finding the recession velocity, we can substitute the value of d from the previous solution:
d = 0.891
Mpc = 0.891 × 10⁶ pc
So, Vr = H0d
= 70 × 0.891 × 10⁶ km/s
= 62,370 km/s
Therefore, the recession velocity of the galaxy is 62,370 km/s.
magnitude-distance formula is, d = 10(m − M + 5 )/5,
where,
m = Apparent magnitude
M = Absolute magnitude of the supernova
Substituting the values of m = 17.5 and
M = −19.3,d
= 10(17.5 − (−19.3) + 5 )/5d
= 10(41.8)/5d
= 83.6 pc
= 0.0836 Mpc
Therefore, the distance of the galaxy is 0.0836 Mpc.
Now, using the Hubble law, Vr = H0d,
where,
H0 = 70 km/s/
Mpc = 70 × 10^3 m/s/10^6 pc
Vr = 70 × 10^3 m/s/10^6 pc × 0.0836 Mpc
Vr = 5.852 m/s
Therefore, the recession velocity is 5.852 km/s.
Learn more about distance -
brainly.com/question/114551
#SPJ11
A particle of mass 6 kg travels along a straight line under the influence of a force F. The velocity of the particle is 4 m/s at t = 0 s and 10 m/s at time t = 2 s. Determine the impulse that the force applies to the particle between time t = 0 and t = 2s. Provide only a value without units.
The impulse that the force applies to the particle between time t = 0 and t = 2s is 36.
Let us consider the formula for Impulse.
Impulse= FΔt
where,F = force Δt = time interval
From the given problem,Particle mass, m = 6 kg
Particle velocity at t=0s,
u = 4 m/s
Particle velocity at t=2s,
v = 10 m/s
Δt = t2 - t1
= 2 - 0
= 2 s
The acceleration can be found out using the formula below.
a = (v - u) / Δta
= (10 - 4) / 2
= 3 m/s²
From Newton's second law of motion, force is given as
F = ma
= 6 × 3
= 18
we can find the impulse that the force applies to the particle between time t = 0 and t = 2s by using the formula above.
Impulse= FΔt= 18 × 2= <<18*2=36>>36
The impulse that the force applies to the particle between time t = 0 and t = 2s is 36.
Therefore, the answer is 36 without units.
learn more about force from given link
https://brainly.com/question/12785175
#SPJ11
The equation of a transverse wave on a string is y=(3.6 mm)sin[(23 m
−1
)x+(900 s
−1
)t] The tension in the string is 12 N. (a) What is the wave speed? (b) Find the linear density of this string. (a) Number Units (b) Number Units
The wave speed is 244.82 m/s. The linear density of this string is approximately 5.19 x 10⁻⁴ kg/m.
(a) Wave speed:
The equation of a transverse wave on a string is y=(3.6 mm)sin[(23 m−1)x+(900 s−1)t].
We can use the wave speed equation to determine the wave speed.
v = fλ
Here, f is the frequency of the wave, and λ is its wavelength.
f = 900 s⁻¹
λ = 2π / k
Where k is the wave number.
k = 23 m⁻¹
v = fλ
v = (900 s⁻¹)(2π/23 m⁻¹)
The wave speed is: v ≈ 244.82 m/s
(b) Linear density:
The linear density can be determined using the formula below:
μ = T / v²
Where T is the tension in the string and
v is the wave speed.
μ = T / v²
μ = 12 N / (244.82 m/s)²
The linear density of this string is approximately 5.19 x 10⁻⁴ kg/m.
Learn more about the linear density from the given link-
https://brainly.com/question/17594847
#SPJ11
Two large parallel conducting plates carrying opposite charges of equal magnitude are separated by 2.20 cm.
If the surface charge density for each plate has magnitude 47.0 nC/m^2, what is the magnitude of E in the region between the plates?
What is the potential difference between the two plates?
If the separation between the plates is doubled while the surface charge density is kept constant at the value in part (a), what happens to the magnitude of the electric field?
O doubles
O stays the same
O halves
To find the magnitude of the electric field (E) between the plates, we can use the formula for the electric field between parallel plates:
E = σ / ε₀
where σ is the surface charge density and ε₀ is the permittivity of free space.
Given:
Surface charge density (σ) = 47.0 nC/m²
Separation between the plates (d) = 2.20 cm = 0.022 m
We can substitute these values into the formula to calculate the electric field magnitude:
E = (47.0 × 10⁻⁹ C/m²) / (8.85 × 10⁻¹² C²/(N·m²))
E = 5.31 × 10⁴ N/C
Therefore, the magnitude of the electric field (E) between the plates is 5.31 × 10⁴ N/C.
To find the potential difference (V) between the plates, we can use the formula:
V = Ed
where E is the electric field magnitude and d is the separation between the plates.
Substituting the values:
V = (5.31 × 10⁴ N/C) × (0.022 m)
V = 1168 V
To learn more about electric field follow:
https://brainly.com/question/11482745
#SPJ11
which is the process used in fire investigation to determine if and where electrical circuits were energized at the time of the fire?
The process used in fire investigation to determine if and where electrical circuits were energized at the time of the fire is live circuit analysis.
This is a technique in which investigators use specialized equipment to measure the voltage and amperage levels of electrical circuits in the building. Live circuit analysis is conducted once the electrical power supply is re-established on-site for investigating the fire's origin and cause. It involves checking electrical outlets, appliances, and other devices that might have been connected to electrical circuits in the building.
This process is vital for determining whether an electrical fault or malfunction caused the fire and identifying the responsible parties for negligence. In summary, the live circuit analysis is a standard fire investigation procedure that can determine the presence and location of electrical faults that led to a fire. The technique provides insights for experts to reconstruct the origin and causes of the fire to prevent future tragedies.
Learn more about electrical circuits at:
https://brainly.com/question/29639137
#SPJ11
Suppose a damped oscillator has m = 1.0kg, k = 100kg/s2, initial position x(0) = 0.5m, and initial
velocity v(0) = 0.0 m/s. Its equilibrium position is at x = 0.
(a) What is the function x(t) when the damping constant is b=4 kg/s? Make sure to check first if the
oscillator is underdamped, critically damped, or overdamped! Provide numeric values and units
for all parameters that appear in the function. Check that your equation is in agreement with the
two initial conditions (for position and velocity).
(b) Find the time at which the maximum speed occurs.
(a) The equation for the position as a function of time is [tex]\x(t) = e^{-2t} \times 0.5 \ cos(10t)[/tex]
(b) The time at which the maximum speed occurs is 15.4 s.
What is the function x(t) when the damping constant is b=4 kg/s?(a) The function x(t) when the damping constant is b=4 kg/s is calculated as follows;
Determine b critical;
b = 2 √(mk)
b = 2√(1.0 kg x 100 kg/s²)
b = 20 kg/s
b (4 kg/s) < b (20 kg/s)
So the oscillator is underdamped.
(a) For an underdamped oscillator, the position as a function of time is given as;
[tex]x(t) = e^{(-bt / 2m)} (A cos(\omega t) + B sin(\omega t))[/tex]
Where;
A and B are constants ω is the angular frequencyThe constants A and B is calculated using the initial conditions as follows;
When t = 0:
x(0) = e⁰ (Acos(0) + Bsin(0))
0.5 m = (A + 0)
0.5 m = A
A = 0.5 and B = 0
The equation for the position as a function of time is determined as;
[tex]x(t) = e^{(-4t / 2 \times 1)} (0.5 \times cos(\sqrt\frac{k}{m} \times t)) \\\\x(t) = e^{(-4t / 2 \times 1)} (0.5 \times cos(\sqrt\frac{100}{1} \times t))\\\\x(t) = e^{-2t} \times 0.5 \ cos(10t)[/tex]
(b) The time at which the maximum speed occurs is determined as follows;
the derivative of position wrt time = velocity
[tex]x(t) = e^{-2t} \times 0.5 \ cos(10t)\\\\x'(t) = -2e^{-2t}\times 0.5 cos(10t) + e^{-2t} \times 0.5(-10)(sin(10t)\\\\x'(t) = -e^{-2t} \times (cos(10t ) \ + 5 sin(10t))[/tex]
The value of the time is calculated as;
[tex]0 = -e^{-2t} \times (cos(10t ) \ + 5 sin(10t))\\\\0 = cos(10t ) \ + 5 sin(10t)\\\\0 = cos(10t) \ + \ 5(1 - cos^2(10t))\\\\0 = cos (10t) \ + \ 5 - 5cos^2(10t)[/tex]
let cos(10t) = x
0 = x + 5 - 5x²
5x² - x - 5 = 0
solve the quadratic equation using formula method as follows;
x = 1.1 or -0.9, we will take -0.9 since cosine of angles cannot be greater than 1.
cos(10t) = -0.9
10t = cos⁻¹ (-0.9)
10t = 154.2
t = 154.2/10
t = 15.4 seconds
Learn more about damped oscillator here: https://brainly.com/question/13072605
#SPJ1
If there is a pendulum that crosses the equilibrium position at
0.292 seconds. What is the length in cm?
If there is a pendulum that crosses the equilibrium position at 0.292 seconds, the length of the pendulum is approximately 25.5 cm.
The pendulum is a physical system that follows harmonic motion, characterized by a back-and-forth movement, also known as oscillation, around a central point known as the equilibrium position. The movement of the pendulum is determined by its length, and it depends on the force that acts on the pendulum.
The harmonic motion of the pendulum is periodic, meaning that it repeats itself after a certain period, which is directly proportional to the square root of the length of the pendulum, and inversely proportional to the square root of the acceleration due to gravity.
Therefore, the formula for the period of the pendulum is given as:
[tex]T = 2\pi\sqrt(L/g)[/tex]
Where:T is the period of the pendulum, L is the length of the pendulum, g is the acceleration due to gravity.
In this case, if the pendulum crosses the equilibrium position at 0.292 seconds, then the time period is given as:
T = 2 × 0.292s = 0.584s
The acceleration due to gravity, g, is [tex]9.81 m/s^2 or 981 cm/s^2[/tex].
Substituting the values into the formula:
[tex]T = 2\pi\sqrt(L/g)0.584 = 2\pi\sqrt(L/981)L/981 = (0.584/2\pi)^2L = (981 * 0.584^2)/(4\pi^2)= 25.5 cm[/tex]
Therefore, the length of the pendulum is approximately 25.5 cm.
Learn more about harmonic motion here:
https://brainly.com/question/32494889
#SPJ11
There is a capacitor connected to a source of voltage providing the potential difference V. Next, the voltage across the capacitor is doubled. Due to this the capacitance of the capacitor: Options-
1. is decreased by a factor of 2
2. Is doubled
3. stays the same
The capacitance of a capacitor is the ratio of the charge stored on its plates to the voltage across them. The voltage across a capacitor is directly proportional to the amount of charge stored in the capacitor, according to the formula
Q = CV.
When a capacitor is connected to a voltage source, the amount of charge stored in it is proportional to the capacitance of the capacitor and the voltage across it.
As a result, when the voltage across a capacitor is doubled, the charge stored in it also doubles.
As a result, the capacitance of the capacitor stays the same when the voltage across it is doubled since the charge stored on its plates also doubles.
Since capacitance is a fixed value based on the material and size of the capacitor, it is unaffected by changes in the voltage across it.
Hence, option 3: stays the same is the correct answer.
To know more about charge visit:
https://brainly.com/question/13871705
#SPJ11
The stored energy in an inductor: depends on the rate of change of current has units J/H depends in sign, upon the direction of the current. is none of the above is proportional to the spiare at the inductance.
An inductor is an electronic device that stores electrical energy in a magnetic field when an electric current is passed through it. The energy stored in an inductor depends on the rate of change of current, and is measured in joules per henry (J/H).
This energy is dependent upon the direction of the current, and is said to depend on the direction of the current.The stored energy in an inductor is proportional to the square of its inductance. In other words, the larger the inductance of an inductor, the more energy it can store. Inductance is measured in henries (H), and is proportional to the ratio of voltage to current in the device.
This ratio is known as the reactance of the inductor, and is given by the formula Xl = 2πfL, where Xl is the reactance, f is the frequency of the alternating current passing through the inductor, and L is the inductance.The direction of the current passing through an inductor affects the polarity of the magnetic field created by the device.
In conclusion, the energy stored in an inductor depends on the rate of change of current, has units J/H, and is dependent upon the direction of the current passing through the device. Additionally, the stored energy is proportional to the square of the inductance of the device.
To know more about electronic visit:
https://brainly.com/question/12001116
#SPJ11
An aircraft with a mass of 100 slugs accelerates down the runway at 3ft/sec
2
, Find it's propellor thrust; 300 slugs 300 Newtons 300lbs 300ft/sec Question 9 (1 point) An SR20 weighs 2850lbs. It accelerates down the runway at 6ft/sec
2
, Find it's mass in slugs; 2850 slugs 89 slugs 89 kg
Mass = Force / Acceleration Using the formula above;
mass = force / acceleration
mass = 2850 lb / 6 ft/sec2mass = 475 slugs
Therefore, the mass of the SR20 is 475 slugs.
Firstly, let's define slug. A slug is a unit of mass used in the British gravitational system, symbolized as slug. It is defined as the mass that needs a 1 foot per second squared force to move it a 1 foot per second speed.
1 slug = 32.174 pound (lb) = 14.59390 kilogram (kg).
Let's solve each question one by one.
An aircraft with a mass of 100 slugs accelerates down the runway at 3ft/sec2,
Find its propeller thrust.
Propeller thrust = Mass x Acceleration
Propeller thrust = 100 slugs x 3 ft/sec2
Propeller thrust = 300 lb
An SR20 weighs 2850lbs.
It accelerates down the runway at 6ft/sec2,
Find its mass in slugs.
To know more about squared force visit:
https://brainly.com/question/31821680
#SPJ11
A recurrent nova could eventually build up to a:
Select one:
A. planetary nebula.
B. quasar.
C. Type I supernova.
D. Type II supernova.
E. hypernova.
Option C. is correct. The recurrent nova has the potential to build up its mass over time and eventually reach the critical threshold for a Type I supernova.
Recurrent novae are binary star systems where a white dwarf accretes material from a companion star. When the accreted material reaches a critical mass, a thermonuclear explosion occurs on the surface of the white dwarf, resulting in a nova outburst. Unlike classical novae, recurrent novae experience multiple eruptions over time.
As a recurrent nova continues to accrete material, the mass of the white dwarf gradually increases. If the mass surpasses the Chandrasekhar limit of about 1.4 times the mass of the Sun, a Type I supernova can occur. In a Type I supernova, the white dwarf undergoes a catastrophic explosion, completely destroying the star.
Therefore, the recurrent nova has the potential to build up its mass over time and eventually reach the critical threshold for a Type I supernova.
Learn more about Chandrasekhar limit here:
https://brainly.com/question/33134523
#SPJ11
a star of the sun’s mass never becomes hot enough for carbon to react, and the star’s energy production is at an end. what happens to the outer layers? what is this star called?
When a star of the Sun's mass never becomes hot enough for carbon to react, and the star's energy production is at an end, it sheds its outer layers and what is left of the core is called a white dwarf.
A white dwarf is a stellar remnant that is incredibly dense. A white dwarf is the remaining core of a star that has run out of fuel and shed its outer layers. It's made up of electron-degenerate matter, which is a phase of matter that can only be achieved at incredibly high densities. The radius of a white dwarf is comparable to that of the Earth, but its mass is typically between 0.5 and 1.4 solar masses. They are called white dwarfs because of how they appear literally. A white dwarf is White and Small about the size of the Earth, perhaps a tiny bit bigger hence a dwarf star. In 1863, the optician and telescope maker Alvan Clark spotted this mysterious object. This companion star was later determined to be a white dwarf. There are 10 billion white dwarfs in the Milky Way galaxy because many sunlike stars have already gone through the process of dying
Learn more about white dwarf at
brainly.com/question/28346772
#SPJ11
What is the meaning of the following statement : the charge is
always associated with mass ?
The statement "the charge is always associated with mass" refers to the fundamental property of matter and the way it interacts with electromagnetic forces. Charge is a fundamental property of matter that can either be positive or negative.
It is a property that interacts with electromagnetic fields, which is why it is called an electromagnetic charge. In addition to charge, matter also has mass, which is a measure of how much matter is present. Mass is an essential property of matter because it determines how much force is needed to move an object.
The concept of charge is very important in the field of particle physics. It plays a vital role in the interactions between particles, which is what makes the universe the way it is. The most fundamental particles in the universe are quarks, which have an electric charge. Protons and electrons also have an electric charge. When these particles interact, they exchange photons, which are particles of light. These photons carry the electromagnetic force between particles.
To know more about electromagnetic forces visit:
https://brainly.com/question/13967686
#SPJ