Excess alcohol is removed by Vacuum filtration.
What is vacuum filtration?Vacuum filtration is a methodology where a tension differential is kept up with across the channel medium by clearing the air beneath the channel paper. Vacuum filtration gives a power on the arrangement notwithstanding that of gravity and builds the pace of filtration. Vacuum filtration is the standard strategy utilized for isolating a strong fluid blend when the objective is to hold the strong (for instance in crystallization).How do you dry a product after vacuum filtration?The strong can be dried rapidly by washing the strong with an unpredictable fluid (methanol, CH3)2CO, or ether are normal) that the strong won't break up in. In the event that the filtrate is to be gathered, change the getting jar prior to washing.To learn more about vacuum filtration from the given link
https://brainly.com/question/24082009
#SPJ4
The reaction na 3po 4( aq) 3 agno3( aq) → ag 3po 4( s) 3 nano 3( aq) is best classified as a(n):_____.
The reaction [tex]Na_{3} PO_{4} ( aq) +3AgNO_{3} (aq)[/tex] → [tex]Ag_{3} PO_{4} ( aq) +3NaNO_{3} (aq)[/tex] is best classified as double displacement reaction.
Those reaction in which two compounds react by exchanges of ions to form two new compounds is called double displacement reaction. The easiest way to identify double displacement reactions is to check to see whether the cations exchanged anions with each other or not . Always balanced chemical equation is used to determine.
There are three types of double displacement reaction which is given as,
Precipitation Neutralization Gas formationThe real world example of double displacement reaction is combining vinegar and baking soda to create homemade volcano.
learn more about double displacement reaction
https://brainly.com/question/13870042?
#SPJ4
During the process of heat transfer, the heat transferred to or from a system's surroundings is always?
Answer:
During the process of heat transfer, the heat transferred to or from a system's surroundings is always equal in magnitude to the heat transferred to or from the system, but opposite in sign.
What is the 1st law of thermodynamics?
The total energy of an isolated system is said to stay constant according to the first rule of thermodynamics. Energy cannot be generated or destroyed, but it may be transformed from one form into another inside a closed system, which is known as the conservation of energy.
This rule states that when a system is exposed to a certain amount of heat, the amount of heat that the system absorbs is equal to the product of the increase in internal energy (change in internal energy) of the system and the external work that the system does. The relationship between a system's internal energy and work output and the heat given to it is demonstrated by the first law of thermodynamics. This equation provides the foundation for the majority of practical innovations like heat engines, freezers, and air conditioners.
The equation for the first law of thermodynamics is given as; ΔU = q + W
Where,
ΔU = change in internal energy of the system.q = algebraic sum of heat transfer between system and surroundings.W = work interaction of the system with its surroundings.The heat transported to or from a system's surroundings during the process of heat transfer is always opposite in sign, but equal in size, to the heat transferred to or from the system.
What is heat transfer?
The flow of thermal energy between physical systems is known as heat transfer. The temperatures of the systems and the characteristics of the medium used to transmit the heat affect how quickly it transfers. Conduction, convection, and radiation are the three basic ways that heat is transferred. It is crucial to employ heat transfer, or the movement of energy in the form of heat, in applications of the First Law of Thermodynamics since it is a mechanism through which a system changes its internal energy. Diffusion and conduction are two different concepts. Diffusion linked to fluid mixing is not the same as conduction.
The Second Law of Thermodynamics controls the direction of heat transmission, which is from one area of high temperature to another area of lower temperature. The internal energy of the systems from and to which the energy is transmitted is altered during heat transfer. Heat transfer will take place in a way that makes the group of systems' entropy higher.
In physics, heat is described as the flow of thermal energy over a boundary that is clearly defined surrounding a thermodynamic system. The amount of work that a thermodynamic system may accomplish is known as the thermodynamic free energy. Enthalpy is a thermodynamic potential with the letter "H" that is made up of the system's internal energy (U) plus the volumetric product of pressure (P) and temperature (T) (V). A joule is a unit used to measure energy, effort, or heat production.
The quantity of heat transmitted in a thermodynamic process that modifies a system's state relies on how that process happens, not just the net difference between the process' beginning and ending states, since heat transfer is a process function (or route function), as opposed to a function of state.
The heat transfer coefficient, which represents the relationship between the heat flux and the thermodynamic force that drives the flow of heat, is used to determine both thermodynamic and mechanical heat transfer. A quantitative, vectorial description of the movement of heat through a surface is called a heat flux.
The term "heat" is sometimes used interchangeably with "thermal energy" in technical applications. This usage derives from the historical understanding of heat as a fluid (caloric) that may be transported by a variety of reasons, which is also prevalent in laypeople's language and daily life.
Thank you,
Eddie
What is the total pressure exerted by a mixture of 48.0 grams of CH4 and 56.0 grams of
hydrogen gas when confined in a volume of 15.0 liters at 13°C.
The pressure of the gas is obtained as 48 atm.
What is the total pressure?Now we know that;
Number of moles of CH4 = 48.0 grams /16 g/mol = 3 moles
Number of moles of H2 = 56.0 grams/2 g/mol = 28 moles
Total number of moles present = 3 moles + 28 moles = 31 moles
Using;
PV =nRT
P = total pressure
V = total volume
n = total number of moles
R = gas constant
T = temperature
P = nRT/V
P = 31 * 0.082 * 286/15
P = 48 atm
Learn more about pressure of a gas:https://brainly.com/question/18124975
#SPJ1
What type of interaction occurs between the r groups of valine and isoleucine in a tertiary structure? hydrogen bond salt bridge disulfide bridge hydrophobic interaction
The type of interaction occurs between the r groups of valine and isoleucine in a tertiary structure will be "hydrophobic interaction".
The only factor responsible for the hydrophobic attraction connecting molecules or particles submerged in water would be the AB free energy of cohesiveness between both the water molecules. Regardless of whether the molecules as well as, particles are submerged in water or not, this interaction always exists.
The entire three-dimensional configuration of a protein's polypeptide chain in space is referred to as the protein's tertiary structure. It is typically stabilized through interactions between the side chains of nonpolar amino acids with externally polar hydrophilic hydrogen as well as ionic bonds.
Therefore, the type of interaction occurs between the r groups of valine and isoleucine in a tertiary structure will be "hydrophobic interaction".
To know more about interaction
https://brainly.com/question/15925863
#SPJ4
What reagent is needed to convert 1-hexyne to 2-hexanone?
(a) o3 /zn/ h3o
(b) pcc (pyridinium chlorochromate)
(c) bh3 /h2o2 /oh-
(d) h2o/h
The reagent is needed to convert 1-hexyne to 2-hexanone is [tex]H_{2}O /H^{+}[/tex].
So , option D is correct one.
Ozonolysis is used to form aldehyde and ketone from alkene not alkyne .So option A is incorrect .
The reagent PCC is used as an oxidant and is used to convert primary and secondary alcohol into aldehyde and ketone.
The [tex]BH_{3} /H_{2} O_{2} /OH^{-}[/tex] is used to convert alkene into alcohol which is known as hydroboration reaction.
The addition of a hydroxyl group to an alkyne causes tautomerization which subsequently forms a carbonyl Markovnikov addition of a hydroxyl group to an alkyne forms a ketone. So, [tex]H_{2}O /H^{+}[/tex] is used to convert alkyne into ketone.This reagent is needed to convert 1-hexyne to 2-hexanone.
learn more about hexanone
https://brainly.com/question/9578561
#SPJ4
Calculate the approximate amount os sodium hydroxide needed to make 500ml if a. 3 naoh solution.
6 gram of sodium hydroxide (NaOH) needed to make 500ml if 0.3 NaOH solution.
What is molarity?Molarity (M) is the amount of a substance in a certain volume of solution.
Molarity is defined as the moles of a solute per liters of a solution.
The unit of molarity is mol/L.
Volume of NaOH = 500 mL
Molarity of the aqueous solution = 0.3 M
Molar mass of NaOH= (23+16+1) g = 40g
Let the mass of NaOH be X.
Now , according to formula number of moles of a given substance = given mass / molar mass
Therefore, no. of moles of NaOH = X/40
Since, molarity = number of moles of solute/ volume of solution in liter.
Hence, 0.3 = ( X /40) / (500 / 1000)
Solving this we get X= 6g
6 gram of sodium hydroxide (NaOH) needed to make 500ml if 0.3 NaOH solution.
Learn more about molarity, Here:
https://brainly.com/question/12127540
#SPJ4
The isotope ra decays to rn by emitting radiation. What type of radiation is emitted?
Heavy elements such as radium, uranium, and thorium, all have alpha decaying nuclei. An Rn (radon) nuclei are created when a Ra (radium) nucleus decays, emitting an alpha particle in the process.
Discussion about radiation:
The radioactive process known as alpha decay, sometimes known as α radiation, involves the ejection of an alpha particle from the nucleus, which includes 2 neutrons and 2 protons.
A helium atom's nucleus and an alpha particle have many similarities. Instability is seen as being present in all nuclei with an atomic number (Z) more than 82. These are frequently subject to alpha decay and are thought to be "neutron-rich." Heavy elements such as radium, uranium, thorium, etc., all have alpha decaying nuclei. An Rn (radon) nucleus is created when a Ra (radium) nucleus decays, emitting an alpha particle in the process.The mass number (A) and atomic number (Z) are typically lowered by two and four, respectively, during alpha decay. For instance, Ra-226 with atomic numbers 88 and 226 is converted into Rn-222 with the mass number 222 and atomic number 86 by alpha decay.Learn more about alpha decay here:
https://brainly.com/question/27870937
#SPJ4
Rounding to the nearest
tenth, what is the mean of
85, 85, 100, 90, 100, 85,
80, 100, 90?
For calculating mean value, add up all of the values then divide by the number of them. 815/9 is about 90.6
What is mean value?The mean refers to the average of a set of values. The mean can be computed in a number of ways, including the simple arithmetic mean (add up the numbers and divide the total by the number of observations), the geometric mean, and the harmonic mean.
Moreover, the mean can be used to represent the typical value and therefore serves as a yardstick for all observations. For example, if we would like to know how many hours on average an employee spends at training in a year, we can find the mean training hours of a group of employees.
Hence, the mean can be calculated only for numeric variables, no matter if they are discrete or continuous. It's obtained by simply dividing the sum of all values in a data set by the number of values.
Learn more about mean value:
https://brainly.com/question/14882017
#SPJ2
CH3OH ___ ions in an aqueous solution. A) forms B) does not form
CH3OH doesn't form ions in an aqueous solution.
Water and one or more dissolved substances make up aqueous solutions. In an aqueous solution, solids, gases, or other liquids may dissolve. Examples of watery solutions include coke, seawater, rain, acid, base, and salt solutions. A solution that is not an aqueous solution is any liquid that does not contain water.
Solutions that contain water as the solvent are known as aqueous solutions. Water is a great solvent, but not everything will easily dissolve in it. The term "aqueous" in a chemical equation designates a material in water. For instance, adding sodium hydroxide solution to diluted hydrochloric acid results in the production of sodium chloride.
To learn more about the aqueous solutions please visit -
https://brainly.com/question/2159485
#SPJ1
How many moles of na2co3 are necessary to reach stoichiometric quantities with cacl2
0.0102 moles Na₂CO₃ = 1.08g of Na₂CO₃ is necessary to reach stoichiometric quantities with cacl2.
Explanation:Based on the reaction
CaCl₂ + Na₂CO₃ → 2NaCl + CaCO₃
1 mole of CaCl₂ reacts per mole of Na₂CO₃
we have to calculate how many moles of CaCl2•2H2O are present in 1.50 g
We must calculate the moles of CaCl2•2H2O using its molar mass (147.0146g/mol) in order to answer this issue. These moles, which are equal to moles of CaCl2 and moles of Na2CO3, are required to obtain stoichiometric amounts. Then, we must use the molar mass of Na2CO3 (105.99g/mol) to determine the mass:Moles CaCl₂.2H₂O:1.50g * (1mol / 147.0146g) = 0.0102 moles CaCl₂.2H₂O = 0.0102moles CaCl₂
Moles Na₂CO₃:
0.0102 moles Na₂CO₃
Mass Na₂CO₃:
0.0102 moles * (105.99g / mol) = 1.08g of Na₂CO₃ are present
Therefore, we can conclude that 0.0102 moles Na₂CO₃ is necessary.to reach stoichiometric quantities with cacl2.
To learn more about stoichiometric quantities visit:
https://brainly.com/question/28174111#SPJ4
What is chemical energy and how does it work ?
ty in advance
Answer:
Chemical energy is defined as. the energy which is stored in the bonds of chemical compounds (molecules and atoms).
Explanation:
Chemical energy may be released during a chemical reaction
Answer:
Chemical energy is the energy stored in the chemical bonds of Compound.
It's used during chemical Reactions.
Carbon dioxide is considered a waste product of cellular respiration.
a. true
b. false
Answer: True
Explanation:
How would you separate a mixture of 4-tert-butylphenol and 2- chlorobenzoic acid? Explain the detailed steps including the choice of solvent and why this solvent would be use.
The a mixture of 4-tert-butylphenol and 2- chlorobenzoic acid is separate by the by using bicarbonate solvent.
When solution of bicarbonate is added in mixture of 4-tert-butylphenol and 2- chlorobenzoic acid then 2- chlorobenzoic acid form a carboxylate ion whereas 4-tert-butylphenol is underacted and filtered out.
Since, only 2- chlorobenzoic acid which is acid is convert into its conjugate base by solution of bicarbonate in mixture of 4-tert-butylphenol and 2- chlorobenzoic acid .
However, phenol is less acidic than carboxylic acid. Both phenol and carboxylic acid is soluble in organic solvent . At that point as the phenol isolates as an oil, one needs to cool the blend in an ice shower to encourage crystallization
to learn more about 4-tert-butylphenol
https://brainly.com/question/5274368
#SPJ4
A volume of oxygen gas occupies 38. 7 ml at 751 mmhg and 21°c. what is the volume if the pressure changes to 359 mmhg while the temperature remains constant?
Answer:
80.96 L
Explanation:
START WITH
P1 V1 = P2 V2
V2 = P1 V1 / P2
= 751 * 38.7 / 359 = 80.96 L
According to Boyle's law, where the temperature remains constant the volume of the gas if the pressure changes to 359 mm Hg is 80.95 ml.
What is Boyle's law?Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.
Mathematically, it can be stated as,
P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.
According to the equation the unknown pressure and volume of any one gas can be determined if two gases are to be considered.That is,
P₁V₁=P₂V₂
Substitution in the above equation gives ,V₂=751×38.7/359=80.95 ml.
Thus, the volume of gas at 359 mm Hg pressure is 80.95 ml.
Learn more about Boyle's law,here:
https://brainly.com/question/1437490
#SPJ2
Why is 15 m acetic acid an appropriate solvent in which to perform rate studies of electrophilic bromintations?.
15M acetic acid an appropriate solvent in which to perform rate studies of electrophilic bromintations as Acetic acid activates the bromine and makes it a better electrophile.
What is electrophilic halogenation?
In organic chemistry, an electrophilic aromatic halogenation is a type of electrophilic aromatic substitution. This organic reaction is typical of aromatic compounds and a very useful method for adding substituents to an aromatic system.Halogenation of Benzene where X is the halogen, catalyst represents the catalyst (if needed) and HX represents the protonated base.A few types of aromatic compounds, such as phenol, will react without a catalyst, but for typical benzene derivatives with less reactive substrates, a Lewis acid catalyst is required. Typical Lewis acid catalysts include AlCl3, FeCl3, FeBr3 and ZnCl2. These work by forming a highly electrophilic complex which is attacked by the benzene ring.To learn more about electrophilic halogenation: https://brainly.com/question/26831851
#SPJ4
Chemical reactions can be detected by: _________
a) color change from reactants to products
b) the production of a precipitate
c) a change in temperature
d) an increase of surface area
(A) Color changes from reactant to products.
The rate of a chemical reaction is calculated by dividing the rate of change in a reactant or product's concentration by the coefficient from the equation's balanced state.
2N2O5(g) → 4NO2(G) + O2(g)
A change in color and the appearance of bubbles are two indications of a chemical shift.In a chemical process, the makeup of the components changes; in a physical change, the appearance, smell, or straightforward exhibition of a sample of matter changes without changing its composition.
Despite the fact that we refer to them as physical "reactions," nothing is actually changing. A change in the substance in question's elemental composition is necessary for a reaction to occur. Therefore, from now on, we will simply refer to bodily "reactions" as physical changes.
Physical modifications must only cause a variation in display without altering the composition. Typical modifications include, but are not limited to:
Texture\Color\Temperature\Shape
learn more about Chemical reactions: https://brainly.com/question/16416932
#SPJ4
Calculate the ph after 10. 0 ml of 0. 40 m naoh is added to 20. 0 ml of 0. 50 m hc.
The pH is 13.31.
The smaller the pH value the more acidic, the larger the pH value the more basic.
The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7.
Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution.
Molarity of NaOH = 0.40 M
Volume of NaOH = 10.0 mL
Molarity of HCL = 0.50 M
Volume of HCL = 20.0 ml
[tex][OH^-] = (M_2V_2 -M_1V_1)/(V_1+V_2)\\[/tex]
[tex]= (0.50*20.0 - 0.40*10.0) / (20+10)[/tex]
[tex]= (10 -4)/ 30\\[/tex]
[tex]= 6/30[/tex]
[tex]=0.2[/tex]
[tex]pOH = - log (OH ^-)[/tex]
[tex]pOH = - log (0.2)\\[/tex]
[tex]pOH = - ( - 0.698)[/tex]
[tex]pOH = 0.69[/tex]
[tex]pH + pOH = 14[/tex]
[tex]pH = 14 -0.69[/tex]
[tex]pH = 13.31[/tex]
Therefore, the pH after 10.0 mL of 0.40 M NaOH is 13.31.
Learn more about pH here:
https://brainly.com/question/22390063
#SPJ4
Choose the molecules that contains sphingosine.
a. sphingomyelins molecule
b. molecule
c. molecule
d. a phosphatidylcholine
Answer:
a phosphatidylcholine
The molecule that contains sphingosine is a phosphatidylcholine compound.
What is a compound?
Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compound,here:
https://brainly.com/question/14658388
#SPJ2
What is the C-terminal amino acid in the tetrapeptide
Val-Thr-Phe-Pro?
O threonine
O phenylaline
O valine
O proline
The C-terminal amino acid in the tetrapeptide is valine.
Valine is one of three branched-chain amino acids that enhance energy, increase endurance, and aid in muscle tissue recovery and repair. This group also lowers elevated blood sugar levels and increases growth hormone production.
The cease with a free carboxyl group is called the C-terminal amino acid residue. Peptides are named from the N-terminal acid residue to the C-terminal amino acid.
The C-terminal amino acid may be decided by way of addition of carboxypeptidases, enzymes which cleave amino acids from the C-terminal. A time direction ought to be carried out to look which amino acid is launched first.
Learn more about amino acid here:-https://brainly.com/question/2526971
#SPJ1
The C-terminal amino acid in the tetrapeptide is c) Valine.
The C-terminal amino acid is direct confirmation of the sequence of C terminal of the proteins that are expressed. It is present at the end of the protein sequence. A free carboxyl group is called the C-terminal amino acid residue.
A tetrapeptide is a chain containing four amino acids producing a Chain of amino acids.
Valine is three branched chain amino acids that is needed for protein synthesis. It enhances:
- Energy
- Muscle Growth
- Muscle Regeneration
- Increase endurance
- Muscle Recovery
Valine lowers elevated blood sugar levels. Also, it increases growth hormone production in the body.
Valine is found through following food:
MeatFishSoyDairyPeptides are named from the N-terminal acid residue present in the start to the C-terminal amino acid present at the end.
Learn more about Amino Acid here, brainly.com/question/2526971
#SPJ1
How many moles of argon are in 13.9 g of argon?
Answer:
0.348 moles Ar
Explanation:
You can determine the moles of argon (Ar) by multiplying the given mass by the atomic mass of argon. This number gives the mass in grams per 1 mole. It is important to arrange the conversion in a way that allows for the cancellation of units. The final answer should have 3 significant figures to match the sig figs of the given value (13.9 = 3 sig figs).
Atomic Mass (Ar): 39.948 g/mol
13.9 g Ar 1 mole
----------------- x ------------------ = 0.348 moles Ar
39.948 g
What type of response to chemical exposure is an immediate or rapid harmful reaction?.
An acute impact is a detrimental reaction to an exposure that occurs immediately or quickly.
A chronic impact is a long-term/permanent result of a single dosage or repeated lesser doses of a toxic drug.
What type of effects occur immediately following a chemical exposure?Acute (short-term) effects appear immediately or shortly after chemical exposure. They might be mild, such as nose or throat discomfort, or serious, such as eye damage or passing out from chemical fumes. All of these effects have one thing in common: they occur immediately.
What are the types of chemical exposure?The many methods in which a person might come into contact with dangerous substances are referred to as exposure routes. There are three primary routes of exposure: inhalation, ingestion, and skin contact.
To learn more about chemical exposure from the given link
https://brainly.com/question/13722425
#SPJ4
How much water would need to be added to 750 ml of a 2.8 m hcl solution to make a 1.0 m solution?
1.35 Litres of water need to be added to 750 ml of a 2.8 m hcl solution to make a 1.0 m solution.
Use the following relation:
M1V1=M2V2
Where M is molarity, V is volume and 1 is initial and 2 is the final conditions. Solving for V(2)
M1=2.8 M,V1=750 mL;M2=1.0 M
(2.8 M)×(750 mL)=(1.0 M)×V2
V2=(2.8 M)×(750 mL)(1.0 M) = 2100 mL = 2.1 L
Therefore, Volume of water to be added =2.1 L−0.75 L=1.35 L
Learn more about the Molarity with the help of the given link:
https://brainly.com/question/19517011
#SPJ4
A glow stick contains a glass vial with chemicals. when the glow stick is bent, the vial breaks and the chemicals react to produce a glow. a science student observes that a glow stick kept in the freezer glows for a longer duration than a glow stick kept at room temperature. what conclusion can be drawn based on the observation? be sure to note the outcome and test variables in the conclusion.
A glow stick will glow longer at lower temperatures than at room temperature, one can infer from the observation. Temperature and reaction time are the test variables.
We notice in this reaction that a glow stick stored in the freezer lights for a longer period of time than a glow stick stored at normal temperature. This implies that temperature affects how long a response lasts.
The most straightforward explanation for this observation is that glow sticks glow longer in colder temperatures than they do at room temperature; as a result, glow sticks kept in the freezer are observed to glow longer than glow sticks kept at room temperature.
To learn more about chemicals to the given link:
https://brainly.com/question/24600141
#SPJ4
What impact would adding twice as much na2co3 than required for stoichiometric quantities have on the quantity of product produced?
The product will not be affected by the addition of twice as much Na₂CO₃.
What is Limiting reagent in stoichiometry ?The maximum quantity of the end product determined by a balanced chemical equation is known as the Stoichiometry.The limiting reactant is the one that is consumed first and sets a limit on the quantity of product(s) that can be produced, and the one which remains unconsumed after the final reaction is in Excess.Calculate the moles of each reactant present and contrast it with the mole ratio of the reactants in the balanced equation to determine which reactant is the limiting one.Here,taking the stoichiometry into consideration, we find that the reaction happens with 1:1 ratio; so, adding twice the amount of Na₂CO₃ will lead to its excess making the other the limiting reactant, hence, it would not affect the yield of the product.
To know more about the Limiting reactant, refer to:
https://brainly.com/question/14222359
#SPJ4
How many grams are in 0. 743 mol of al?
There are 20.046 grams in 0.743 moles of Al.
Mole is the SI unit of measurement of the matter present inside any substance or element. It is denoted by the 'n'.
The formula of finding mole is
n = mass / molar mass
According to the question, to find the mass of Al the formula can be rewritten as mass = moles × molar mass.
Molar mass of Al = 26.98 g/mol.
Moles of Al = 0.743 moles
Therefore, mass of Al = 0.743 moles × 26.98 g/moles
Hence, mass = 20.046 grams
To know more about mole, here
brainly.com/question/15209553
#SPJ4
If ionizing radiation interacts with a human cell, causing it to die after one or more divisions, it is classified as:____.
If ionizing radiation interacts with a human cell, causing it to die after one or more divisions, it is classified as mitotic death.
Hence, Option C is correct answer.
What is Ionizing radiation ?Ionizing radiation is a form of energy which is released by atoms that travels in the form of electromagnetic waves.
Examples: Heat or light from the Sun.
What is Mitotic Death ?Radiation damage to the cell death occurs when cells to attempt to divide with the damaged DNA.
Thus from the above conclusion we can say that If ionizing radiation interacts with a human cell, causing it to die after one or more divisions, it is classified as mitotic death.
Hence, Option C is correct answer.
Learn more about the Ionizing Radiation here: https://brainly.com/question/10224449
#SPJ4
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: If ionizing radiation interacts with a human cell, causing it to die after one or more divisions, it is classified as
(A) interference of function
(B) mitotic delay
(C) mitotic death
(D) reproductive death
A blue train of mass 50 kg moves at 4 m/s toward a green train of 30 kg initially at rest. The trains collide. After the collision the green train moves with a speed of 3 m/s. What is the final momentum of the blue train?
A. 110 kgm/s
B. 200 kgm/s
C. 20 kgm/s
D. 90 kgm/s
There are three major parts within each dna nucleotide. of these three, which is responsible for the storage of genetic information?
Which carboxylic acid derivative can be made from another carboxylic acid derivative by a dehydration reaction?
Acid nitric oxide
When a carboxylic acid combines with an acid chloride in the presence of a base, anhydrides are frequently produced.
The Fischer esterification, which involves reacting a carboxylic acid with an alcohol to produce an ester: RCO2H + R′OH RCO2R′ + H2O, is a well-known example of a dehydration reaction. The presence of a dehydrating agent, or a chemical that reacts with water, is frequently necessary for these processes.
Although an ester is produced when an acyl chloride and an alcohol react, this conversion cannot be stopped by adding HCl to the reaction mixture. One of the most popular carboxylic derivatives is esters.
learn more about dehydration reactions https://brainly.com/question/12941706
#SPJ4
Which of these molecules have all atoms lying in the same plane? a. cbr4 and nh3 b. pf5 c. nh3 and hcn d. so3 and hcn
Molecules having all atoms lying in the same plane is c) HCN
HCN is a molecule in which all the atoms in the same plane i.e. it is a Planar molecule.
A Planar molecule is the one in which atoms are arranged in same plane i.e. atoms arrange themselves to exist in a two dimensional plane around the central atom.
The presence of double bond or triple bond in a molecule allows the molecule to get arranged in a plane.
The presence of triple bond in HCN allows it to be arranged in a plane.
HCN to be specific is a Linear molecule in which the angle between H and CN is 180.
The bond between C and N atom is a triple bond containing two pie bonds and one sigma bond.
Hence c) HCN is a planar molecule.
Learn more about Planar molecule here, https://brainly.com/question/14019685
#SPJ4