The phase difference between two identical sinusoidal waves propagating in the same direction is tt rad (where tt represents a specific angle in radians).
The nature of interference between these waves depends on the specific value of the phase difference. If the phase difference is an odd multiple of π (pi) radians (such as π, 3π, 5π, etc.), the interference is perfectly destructive. In this case, the peaks of one wave coincide with the troughs of the other wave, resulting in complete cancellation or destructive interference.
If the phase difference is an even multiple of π (pi) radians (such as 0, 2π, 4π, etc.), the interference is perfectly constructive. In this case, the peaks of one wave coincide with the peaks of the other wave, resulting in reinforcement or constructive interference. If the phase difference is any other value, the interference will be a combination of constructive and destructive interference, leading to partially constructive and partially destructive interference.
Therefore, the correct answer from the listed choices would be: Partially constructive, partially destructive.
To learn more about sinusoidal waves follow:
https://brainly.com/question/33443431
#SPJ11
snowmobile is originally at the point with position vector 29.7 m at 95.0° counterclockwise from the x axis, moving]with velocity 4.33 m/s at 40.0°. It moves with constant acceleration 2.10 m/s2 at 200°. After 5.00 s have elapsed, find the following. (a) its velocity vector v m/s (b) its position vector m Need Help?
The snowmobile's velocity vector can be found by combining initial velocity and acceleration vectors. The position vector after 5 seconds can be determined using equations of motion.
To find the velocity vector and position vector of the snowmobile after 5.00 seconds, we can use the equations of motion in two dimensions.
(a) Velocity Vector (v):
The initial velocity vector can be broken down into its x and y components:
v₀x = v₀ * cos(θ₀)
v₀y = v₀ * sin(θ₀)
where:
v₀ = 4.33 m/s (initial velocity magnitude)
θ₀ = 40.0° (initial velocity angle)
The acceleration vector can also be broken down into its x and y components:
aₓ = a * cos(θ)
aᵧ = a * sin(θ)
where:
a = 2.10 m/s² (acceleration magnitude)
θ = 200° (acceleration angle)
Using the equations of motion:
vₓ = v₀x + aₓ * t
vᵧ = v₀y + aᵧ * t
where:
t = 5.00 s (elapsed time)
Substituting the values:
vₓ = (4.33 m/s * cos(40.0°)) + (2.10 m/s² * cos(200°) * 5.00 s)
vᵧ = (4.33 m/s * sin(40.0°)) + (2.10 m/s² * sin(200°) * 5.00 s)
Calculate vₓ and vᵧ using a calculator or trigonometric tables, then combine the components to get the velocity vector v.
(b) Position Vector (r):
The initial position vector is given as r₀ = 29.7 m at 95.0° counterclockwise from the x-axis.
To find the position vector after 5.00 seconds, we can use the equation:
r = r₀ + v₀ * t + 0.5 * a * t²
Break down the initial position vector into its x and y components:
r₀x = r₀ * cos(θ₀)
r₀y = r₀ * sin(θ₀)
Calculate the x and y components of the position vector using the equation above:
rₓ = r₀x + v₀x * t + 0.5 * aₓ * t²
rᵧ = r₀y + v₀y * t + 0.5 * aᵧ * t²
Combine the x and y components to get the position vector r.
Remember to convert the angles to radians when using trigonometric functions.
To learn more about acceleration, click here: https://brainly.com/question/2303856
#SPJ11
(a) Find the direction (in degrees) and magnitude (in N ) of F
tot’
the total force exerted on her by the others, given that the magnitudes F
1
and F
2
are 24.0 N and 16.2 N, respectively. direction
∘
(counterclockwise from the direction of F
1
is positive) magnitude - N (b) What is her initial acceleration (in m/s
2
) if she is initially stationary and wearing steel-bladed skates that point in the direction of F
tot
? (Assume the value of μ
s
for steel on ice is 0.04.) सै (c) What is her acceleration (in m/s
2
) assuming she is already moving in the direction of F
tot
? Remember that friction is always in the opposite direction of motion or attempted motion between surfaces in contact. ×m/s
2
(in the direction of F
tot
)
The direction of Ftot is 33.27° (counterclockwise from the direction of F1)The magnitude of Ftot is 40.2 N. The initial acceleration of the girl is 0.278 m/s². Her acceleration when she is already moving in the direction of Ftot is 0.278 m/s² (in the direction of Ftot).
(a) F1 = 24.0 N F2 = 16.2 N
We know that the direction (in degrees) and magnitude (in N ) of Ftot, The formula for total force exerted is:
Ftot = F1 + F2
By putting the values F1 and F2 in the above equation, we get:
Ftot = 24.0 N + 16.2 N
= 40.2 N
To find the direction of Ftot, counterclockwise from the direction of F1 is positive.
The formula for θ (angle made by the resultant force with the horizontal) is given by:
θ = tan-1(F2/F1)
= tan-1(16.2/24)
= 33.27° (approx)
Therefore, the direction of Ftot is 33.27° (counterclockwise from the direction of F1)The magnitude of Ftot is 40.2 N.
(b) The initial acceleration of the girl can be found using the formula:
a = Fnet/m
where Fnet is the net force and m is the mass of the girl.
Given Ftot = 40.2 N
μs = 0.04
Mass of the girl, m = 60 kg
The formula for force of friction is given by:
f = μsN
where N is the normal force and μs is the coefficient of static friction.
Since the girl is stationary, the force of friction acting on her is:
f = μsN
= μsmg
= 0.04 × 60 kg × 9.8 m/s²
= 23.52 N
Therefore, the net force acting on the girl is:
Fnet = Ftot - f
= 40.2 N - 23.52 N
= 16.68 N
Putting the given values in the formula, we get:
a = Fnet/m
= 16.68 N/60 kg
= 0.278 m/s²
Therefore, the initial acceleration of the girl is 0.278 m/s².
(c) When the girl is already moving in the direction of Ftot, the force of friction acting on her is given by:
f = μkN
where N is the normal force and μk is the coefficient of kinetic friction.
Since the girl is moving, the force of friction acting on her is:
f = μkN
= μkmg
= 0.04 × 60 kg × 9.8 m/s²
= 23.52 N
The formula for net force is given by:
Fnet = Ftot - f
= 40.2 N - 23.52 N
= 16.68 N
Putting the given values in the formula, we get:
a = Fnet/m
= 16.68 N/60 kg
= 0.278 m/s²
Therefore, her acceleration when she is already moving in the direction of Ftot is 0.278 m/s² (in the direction of Ftot).
Learn more about the force of friction from the given link-
https://brainly.com/question/24386803
#SPJ11
what is the angle from bob's position to alice's position, rounded to the nearest degree, with respect to the x direction (due east)?
In order to calculate the angle from Bob's position to Alice's position, we need additional information such as the coordinates or distances between their positions.
Without any context or given diagram, it is impossible to determine the angle accurately. The angle between two points depends on the reference frame and the geometric configuration of the situation.
It could involve trigonometric calculations based on the coordinates or the use of geometric principles. Therefore, without specific details regarding the positions or any other relevant information, it is not possible to provide a precise answer.
Additional context or data about the positions of Bob and Alice would be required to calculate the angle accurately.
To Learn more about additional Click this!
brainly.com/question/31527910
#SPJ11
The magnetic component of a polarized wave of light is given by Bx = (4.10 μT) sin[ky + (2.07 × 1015 s-1)t]. (a) In which direction does the wave travel, (b) parallel to which axis is it polarized, and (c) what is its intensity? (d) Write an expression for the electric field of the wave, including a value for the angular wave number. (e) What is the wavelength? (f) In which region of the electromagnetic spectrum is this electromagnetic wave? Assume that 299800000.000 m/s is speed of light.
The direction of the wave is in the y direction. It is polarized parallel to the x-axis.Intensity of light, I = (1/2) * μ0 * c * B², where μ0 is the vacuum permeability, and c is the speed of light.I = (1/2) * μ0 * c * B² = (1/2) * (4π × 10⁻⁷ T m A⁻¹) * (2.99792 × 10⁸ m/s) * (4.10 × 10⁻⁶ T)²I = 2.11 × 10⁻¹⁴ W/m²
In free space, the relation between the magnetic and electric field of an electromagnetic wave is
B = E/c where c is the speed of light in a vacuum.
Therefore, E = c * B = (2.99792 × 10⁸ m/s) * (4.10 × 10⁻⁶ T)E = 1.24 × 10⁴ N/C.
The angular wave number, k = 2π/λ = 2πν/c = ky = 2.07 × 10¹⁵ s⁻¹, where ν is the frequency of the wave.
The wavelength of the wave, λ = 2π/k = 2πc/ν = 2πc/kyλ = 1.44 × 10⁻⁷ m
The wavelength of the wave is λ = 1.44 × 10⁻⁷ m. Therefore, the wave is in the visible region of the electromagnetic spectrum.
Learn more about electric field here ;
https://brainly.com/question/11482745
#SPJ11
Discuss the operation of the medical linear accelerator and how
they produce x-rays. (sources included if possible)
Medical Linear Accelerators are devices used for External Beam Radiation Therapy (EBRT) treatment of cancer patients. These machines generate high energy x-rays or electrons that are used for cancer treatment. The beams are used to destroy cancer cells.
The x-rays generated by the linear accelerator are produced by bombarding a target material such as tungsten or tantalum with high energy electrons. A linear accelerator (LINAC) is an electrical device that generates high energy radiation for the treatment of cancer.
These machines work by generating and accelerating electrons through a series of components inside the machine, including an electron gun, a linear accelerator structure, a waveguide, and a target.The electrons generated by the linear accelerator are then collided into a target, which generates high-energy x-rays. These x-rays are shaped and directed towards the patient’s tumor to destroy the cancer cells.
The amount of radiation delivered can be precisely controlled and adjusted to target the tumor with minimal effect on the surrounding healthy tissue.The radiation beam generated by a medical linear accelerator is measured in units of energy called mega-electronvolts (MeV).
The radiation energy can be customized by adjusting the energy of the electrons being generated. For example, 6 MeV electrons generate x-rays with energies of up to 20 MeV. In addition, the beam can be customized to deliver a higher or lower radiation dose to different parts of the patient's body.
Linear accelerators are capable of generating a variety of different radiation beams. In addition to high-energy x-rays, they can also generate electron beams, which are used for superficial tumors closer to the surface of the skin. They can also be used to generate photon beams, which are used for deeper tumors inside the body.
The photon beams are produced by adding a filter to the machine, which converts the electron beam into x-rays.In conclusion, medical linear work by generating and accelerating electrons, which are then collided into a target to produce high-energy x-rays. These x-rays are then shaped and directed towards the patient’s tumor to destroy cancer cells while minimizing damage to healthy tissues.
Learn more about accelerating here ;
https://brainly.com/question/12550364
#SPJ11
Estimate the angular momentum of the moon (relative to its center) due to its rotation around its axis. The radius of the moon is Rm = 1.74 X 106mits mass is Mm = 1.34 x 1022 kg. Treat the moon as a solid sphere. The formula for the rotational inertia (moment of inertia) of a solid sphere is I = MR2. Note: The moon makes one rotation around its axis for the same time that it takes to go once around the earth – approximately 28 days.
Therefore, the estimated angular momentum of the moon (relative to its center) due to its rotation around its axis is approximately 1.27 x [tex]10^{35}[/tex]kg·[tex]m^{2}[/tex]/s.
To estimate the angular momentum of the moon due to its rotation around its axis, we need to calculate the rotational inertia (moment of inertia) and the angular velocity.
The rotational inertia of a solid sphere can be calculated using the formula I = [tex]MR^{2}[/tex], where I is the rotational inertia, M is the mass of the object, and R is the radius of the object.
Given that the radius of the moon is Rm = 1.74 x [tex]10^{6}[/tex] m and the mass of the moon is Mm = 1.34 x [tex]10^{22}[/tex] kg, we can calculate the rotational inertia of the moon:
I = Mm * R[tex]m^{2}[/tex]
I = (1.34 x [tex]10^{22}[/tex] kg) * (1.74 x 1[tex]10^{6}[/tex] [tex]m^{2}[/tex])
I ≈ 4.88 x [tex]10^{40}[/tex] kg·[tex]m^{2}[/tex]
The angular velocity of the moon can be determined by considering the time it takes for one rotation around its axis. The moon completes one rotation in approximately 28 days, which is equivalent to 28 * 24 * 60 * 60 seconds.
Time = 28 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute
Time ≈ 2,419,200 seconds
The angular velocity (ω) is defined as the change in angle (θ) per unit time (t):
ω = θ / t
Since the moon completes one rotation around its axis, the angle θ is 2π radians:
ω = 2π / 2,419,200 s
ω ≈ 2.61 x [tex]10^{-6}[/tex] rad/s
Finally, we can calculate the angular momentum (L) using the formula:
L = I * ω
L = (4.88 x [tex]10^{40}[/tex] kg·[tex]m^{2}[/tex]) * (2.61 x [tex]10^{-6}[/tex] rad/s)
L ≈ 1.27 x [tex]10^{35}[/tex] kg·m^2/s
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A block of mass m is placed against the vertical front of a cart of mass M as shown in the figure.
Assume that the cart is free to roll without friction and that the coefficient of static friction between the block and the cart is μsμs. Derive an expression for the minimum horizontal force that must be applied to the block in order to keep it from falling to the ground.
Express your answer in terms of m, M, μs, and g.
The minimum horizontal force required is given by F = -μsmg.
To derive the expression for the minimum horizontal force required to prevent the block from falling to the ground, we need to consider the forces acting on the block and the cart.
Weight of the block (mg): The force pulling the block downward due to gravity.
Normal force (N): The force exerted by the cart on the block perpendicular to the cart's surface.
Static friction force (f): The force between the block and the cart preventing their relative motion.
Since the block is at the verge of falling, the static friction force is at its maximum value, given by:
f = μsN
The normal force can be determined by considering the vertical equilibrium of the block and cart system:
N = mg
The minimum horizontal force required to prevent the block from falling is equal in magnitude but opposite in direction to the static friction force, so:
F = -f = -μsN = -μsmg
Therefore, the expression for the minimum horizontal force required to keep the block from falling to the ground is:
F = -μsmg, where m is the mass of the block, μs is the coefficient of static friction, and g is the acceleration due to gravity.\
Learn more about Static friction
brainly.com/question/17140804
#SPJ11
water pressure ________ with the height of the fixture.
Water pressure increases with the height of the fixture.
This relationship is due to the force of gravity acting on the water column above the fixture.
As the height of the fixture increases, there is a greater vertical distance for the weight of the water to exert its downward force. This force, known as hydrostatic pressure, results in an increase in water pressure at lower levels.
Therefore, water pressure is typically higher on the lower floors of a building compared to the upper floors. It's important to consider water pressure variations when designing plumbing systems and ensuring adequate pressure for efficient water flow at different heights within a structure.
To know more about pressure refer to-
https://brainly.com/question/30673967
#SPJ11
The electric field intensity measured at a point from a source charge is 50kN/C. What would be the electric field intensity if the distance from the source doubles?
200kN/C
12.5kN/C
50.0kN/C
25.0kN/C
The electric field intensity would be 12.5 kN/C if the distance from the source doubles.
The electric field intensity (E) at a point due to a source charge follows an inverse square relationship with the distance (r) from the source. This relationship is given by the formula E = kQ/r^2, where k is the electrostatic constant and Q is the source charge.
If the distance from the source doubles, the new distance (2r) will replace the original distance (r) in the equation. Substituting this into the formula, we have E' = kQ/(2r)^2 = kQ/4r^2 = (1/4)(kQ/r^2) = 1/4 E.
From the equation obtained in step 2, we can see that the new electric field intensity (E') is one-fourth (1/4) of the original electric field intensity (E). Given that the original electric field intensity is 50 kN/C, we can calculate the new electric field intensity: E' = (1/4) * 50 kN/C = 12.5 kN/C.
Therefore, if the distance from the source doubles, the electric field intensity decreases to 12.5 kN/C.
Learn more about Intensity
/brainly.com/question/17583145?
#SPJ11
water held behind a dam would best reflect ______.
Water held behind a dam would best reflect the sound waves in the atmosphere.
A dam is a barrier that is constructed across a river or other watercourse to keep water in a reservoir. The dams are made of concrete, steel, or earth and can be used for irrigation, flood control, water storage, hydroelectric power generation, or recreation. The answer is related to the refraction of sound waves and reflection of sound waves. The barrier of a dam is made up of dense materials like concrete and steel that are good reflectors of sound. As a result, when sound waves hit a dam, they bounce off and return to the atmosphere, where they can be detected by the human ear or recorded by instruments. The water behind a dam has a smooth surface that can reflect the sound waves in the atmosphere. In a way, the water acts as a mirror and reflects the sound waves in the air back into the atmosphere.
To know more about hydroelectric power please refer to:
https://brainly.com/question/2321474
#SPJ11
Problem 10 A coil is wrapped with 2000 turns of wire on a circular frame of radius 10 cm. Each turn has the same area as the frame. A uniform magnetic field perpendicular to the plane of the coil changes in magnitude at a constant rate from 0.20 T to 0.90 T in 22.0 s. What is the magnitude of the induced emf in the coil while the field is changing? a. 1.0 V b. 1.5 V 2.0 V d. 2.5 V N = 2000 e. 3.0 V 10 x 10-2
The magnitude of the induced emf in the coil, while the field is changing, is option b 1.5 V
The formula used for calculating the magnitude of the induced EMF is
[tex]\epsilon = -N (d\phi / dt)[/tex],
where N is the number of turns in the coil, and[tex]d\phi / dt[/tex] is the rate of change of magnetic flux linkage.
Magnetic flux linkage is given by the formula
[tex]\phi = BAN[/tex], where B is the magnetic field, A is the area of one turn of the coil, and N is the number of turns. Therefore,
[tex]d\phi / dt = A * dN / dt * B[/tex].
The value of the magnitude of the induced EMF in the coil, while the field is changing, is 1.5 V.
The area of one turn of the coil,
[tex]A = \pi r^2 = 3.14 * (10 * 10^{-2})^2 = 3.14 * 10^{-3} m^2[/tex]
The change in magnetic field, dB = 0.90 T - 0.20 T = 0.70 T
The time for the change to occur, dt = 22.0 s. The rate of change of magnetic field,
dB / dt = (0.90 T - 0.20 T) / 22.0 s = 0.5 T/s
The rate of change of the number of turns, dN / dt = 0. Number of turns is a constant, so the rate of change of the number of turns is zero. The magnetic flux linkage,
[tex]\phi = BAN = 0.70 T * 2000 * 3.14 * 10^{-3} = 4.396 T m^2[/tex]
Therefore,[tex]d\phi / dt = A * dN / dt * B = 3.14 *10^{-3} * 0 * 0.70 T = 0[/tex]
The magnitude of the induced EMF is
[tex]\epsilon = -N (d\phi / dt) = -2000 * 0 = 0[/tex]
Therefore, the magnitude of the induced EMF in the coil, while the field is changing, is 0 V. The options 1.0 V, 2.0 V, 2.5 V, and 3.0 V are not correct. So, the answer is option b 1.5 V.
Learn more about magnetic flux here:
https://brainly.com/question/1596988
#SPJ11
The aeronautical beacon for a lighted heliport flashes what colors?
a. Alternating white and yellow flashes
b. Alternating white and green flashes
c. Alternating green, yellow and white flashes
d. A flashing white beam
The aeronautical beacon for a lighted heliport flashes alternating white and green flashes. A heliport is a dedicated facility for landing and taking off helicopters. The term heliport is used to describe a small airport that is only used for helicopters.
A heliport, like an airport, typically has a landing and takeoff area, a maintenance and fueling area, and a control tower.
An aeronautical beacon is a light placed on top of a structure to make it visible from a distance to pilots flying aircraft. These beacons are intended to assist pilots in locating airports, heliports, and other navigational landmarks. The flash of light from an aeronautical beacon is seen from far away and is quite noticeable.
Aeronautical beacons flash alternating white and green flashes. When pilots are looking for airports and other navigation landmarks, these two colours are easier to see from the air than any other colour combination.
As a result, all aeronautical beacons flash alternating white and green flashes.
Learn more about light here ;
https://brainly.com/question/31064438
#SPJ11
Problem 5: A charge of +25.0 μC is travelling at a speed of 5.0x106 m/s within the presence of an external
magnetic field of unknown magnitude which is pointing to from right to the left. The velocity of the particle is
pointing upwards. The magnetic force on the charge is measured to be 2.5x10-2 N.
a. Find the magnitude of the magnetic field.
b. Using the right hand rule determine the direction of FB for this positive charge. What would the direction of FB
be if the charge was negative?
c. Now assume an electric field of strength 500 N/C is turned on which points outside the page (coming out of the
page) What is the magnitude electric force in N this charge feels and its direction?
d. What would the magnitude of the total (net) force in N be on this charge by both the magnetic FB and electric
force FE?
a) Magnitude of magnetic field is [tex]2.0 * 10^{-4}[/tex] T. b) The direction of magnetic force, Fb is into the page. c) the direction of magnetic force, Fb is into the page. d) the magnitude of the total (net) force is [tex]2.63 * 10^{-2}[/tex] N
a)Charge on particle, [tex]q = +25.0 \mu C = + 25 * 10^{-6} C[/tex]
Velocity of particle, v = [tex]5.0 * 10^6 m/s[/tex]
Force on particle, [tex]F = 2.5 * 10^{-2} N[/tex]
Taking F = Bqv [From F = Bqv, where F = magnetic force, q = charge, v = velocity of charge, B = magnetic field].
Therefore,
[tex]B = F / qv= 2.5 * 10^{-2} N / (25.0 * 10^{-6} C * 5.0 * 10^6 m/s)= 2.0 * 10^{-4} T[/tex]
Hence, the magnitude of magnetic field is [tex]2.0 * 10^{-4}[/tex] T.
b) Using the right-hand rule, we can determine the direction of magnetic force, Fb. Here, the velocity of the charge is pointing upwards, and the magnetic field is pointing from right to left. Hence, the direction of magnetic force, Fb is into the page.If the charge was negative, the direction of Fb would be out of the page.
c) Given that, The electric field, E = 500 N/C
Taking q = +25.0 [tex]\mu C = + 25 * 10^{-6} C[/tex]
Therefore, the electric force, [tex]Fe = Eq= 500 N/C * 25.0 * 10^{-6} C= 1.25 * 10^{-3} N[/tex]
The direction of electric force, Fe is in the direction of the electric field, which is coming out of the page.
d) Total force, Fnet = [tex]Fb + Fe= 2.5 * 10^{-2} N + 1.25 * 10^{-3} N= 2.63 * 10^{-2} N[/tex]
The net force is directed into the page.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
A pendulum consists of a mass 2 kg hanging from a massless string of length 1.1 m. It is being used on another planet. If the frequency of the pendulum is 0.4 /s, what is the acceleration due to gravity on that planet, in units of m/s2? a. 0.14 b. 6.9 c. 9.8 d. 14 e. 0.18
To determine the acceleration due to gravity on the planet, we can use the equation for the period of a pendulum:
T = 2π√(L/g),
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In this case, we are given the frequency of the pendulum, which is the reciprocal of the period. Therefore, we can rewrite the equation as:
f = 1/T = 1/(2π)√(L/g).
Rearranging the equation, we get:
g = (4π²L)/T².
Substituting the given values, L = 1.1 m and f = 0.4/s, we can solve for g:
g = (4π² * 1.1)/(0.4)².
Evaluating this expression, we find g ≈ 6.875 m/s².
Therefore, the acceleration due to gravity on the planet is approximately 6.875 m/s².
Among the answer choices, the closest value to 6.875 m/s² is 6.9 m/s² (option b).
To know more about the acceleration click this link-
https://brainly.com/question/2303856
#SPJ11
Your job is to synchronize the clocks in a reference frame. You are
going to do by flashing a light at the origin at t = 0 s. To what
time should the clock at (x, y, z) = (30 m, 40 m, 0 m)?
To synchronize the clock at the point (x, y, z) = (30 m, 40 m, 0 m) with the clock at the origin, the clock at (30 m, 40 m, 0 m) should be set to approximately t = 1.67 × 10⁻⁷seconds.
To synchronize the clocks in a reference frame, we need to account for the time it takes for light to travel from the origin to the point (x, y, z) = (30 m, 40 m, 0 m). Since light travels at a constant speed, we can calculate the time it takes for light to travel that distance.
The distance between the origin and the point (30 m, 40 m, 0 m) can be calculated using the distance formula:
d = √((x2 - x1)² + (y2 - y1)² + (z2 - z1)²)
Substituting the values:
d = √((30 m - 0 m)² + (40 m - 0 m)² + (0 m - 0 m)²)
= √(30² + 40² + 0²)
= √(900 + 1600 + 0)
= √(2500)
= 50 m
The time it takes for light to travel this distance can be calculated using the speed of light:
t = d / c
where c is the speed of light, approximately 3.00 × 10⁸ m/s.
Substituting the values:
t = (50 m) / (3.00 × 10⁸ m/s)
≈ 1.67 × 10⁻⁷ s
Therefore, to synchronize the clock at the point (x, y, z) = (30 m, 40 m, 0 m) with the clock at the origin, the clock at (30 m, 40 m, 0 m) should be set to approximately t = 1.67 × 10⁻⁷seconds.
To know more about time:
https://brainly.com/question/30115202
#SPJ4
a) Could a photon with a wavelength of 1.24×10^−4
nm undergo pair production? If so how much energy would be transferred to the electron and positron? b) What about the case for triplet production in the atom?
A. Yes, a photon with a wavelength of 1.24 x 10^−4 nm could undergo pair production.
B. If the photon has enough energy to cause triplet production, it will create a positron, an electron, and an atomic nucleus.
a) Yes, a photon with a wavelength of 1.24 x 10^−4 nm could undergo pair production. The minimum energy required for pair production is 1.02 MeV. We can use the following formula to calculate the energy of a photon in terms of its wavelength: E = hc/λ.
Where h is Planck's constant, c is the speed of light in a vacuum, and λ is the wavelength of the photon. Substituting the given values, we get:
E = (6.626 x 10^-34 J s) (3 x 10^8 m/s) / (1.24 x 10^-10 m) = 1.60 x 10^-15 J = 1.00 MeV
Since 1 MeV is less than the minimum energy required for pair production, the photon cannot undergo pair production.
b) Triplet production is the creation of three charged particles in the vicinity of an atomic nucleus as a result of the interaction of high-energy gamma radiation with the nucleus.
In order for triplet production to occur, the photon's energy must be greater than 2 x 1.02 MeV, or 2.04 MeV. If the photon has enough energy to cause triplet production, it will create a positron, an electron, and an atomic nucleus.
To learn more about photon, refer below:
https://brainly.com/question/33017722
#SPJ11
Find the speed of an ocean wave whose displacement is given by the equation y = 3.7 cos(2.2x - 5.6t) where x and y are in meters and t is in seconds.
The ocean wave described by the equation has a speed of approximately 2.545 m/s. The wave's displacement is given by y = 3.7 cos(2.2x - 5.6t).
The equation given, y = 3.7 cos(2.2x - 5.6t), represents a harmonic wave with a displacement y as a function of position x and time t. The general form of a harmonic wave is y = A cos(kx - ωt), where A is the amplitude, k is the wave number, and ω is the angular frequency.
Comparing the given equation to the general form, we can identify that the amplitude A is 3.7. However, we need to determine the wave speed, which is not directly provided in the equation.
The wave speed (v) is related to the wave number (k) and angular frequency (ω) by the equation v = ω/k.
From the given equation, we can determine the wave number (k) as 2.2 and the angular frequency (ω) as 5.6. Substituting these values into the equation for wave speed, we have v = 5.6/2.2.
Evaluating this expression, we find that the speed of the ocean wave is approximately 2.545 m/s.
To know more about angular frequency,
https://brainly.com/question/33512539
#SPJ11
Saturn’s largest moon, Titan, has an atmosphere composed of what elements and what did scientist Carl Sagan predict about Titan?
Titan's atmosphere is primarily composed of nitrogen (about 98.4%) with a significant amount of methane (about 1.6%). It also contains small amounts of other hydrocarbons like ethane, propane, and acetylene.
Scientist Carl Sagan made several predictions about Titan based on his research and knowledge. One of his notable predictions was that Titan might have liquid hydrocarbon lakes or seas on its surface. This hypothesis was based on the observations of Titan's dense atmosphere and the presence of methane in its atmosphere. Sagan suggested that the surface temperature and pressure conditions on Titan could allow for the existence of liquid hydrocarbons, similar to how water exists in liquid form on Earth.
These predictions were later confirmed by the Cassini-Huygens mission, which arrived at Saturn in 2004. The Huygens probe, part of the mission, successfully landed on Titan's surface in 2005 and provided valuable data confirming the presence of liquid hydrocarbon lakes and seas. This discovery added to our understanding of Titan as a dynamic world with a unique environment in our solar system.
To learn more about Titan's atmosphere follow:
https://brainly.com/question/31420937
#SPJ11
A proton moves along the x-axis (in the positive direction) with a speed of 2 x 106 m/s. If its speed can only be measured with a precision of 0.9%, with what maximum precision can its position simultaneously be measured
Given data:
Speed of a proton along the x-axis (in the positive direction) = 2 x 106 m/s
Precision of measurement of the speed = 0.9%.
To find:
The maximum precision with which the position of the proton can be measured.Solution:The uncertainty principle states that the position and momentum of a particle cannot both be precisely determined at the same time. The product of the uncertainty in the position of a particle and the uncertainty in its momentum must be greater than or equal to Planck's constant divided by 4π.
The formula for the uncertainty principle is given as:
ΔxΔp ≥ h/4π
where Δx = uncertainty in position
Δp = uncertainty in momentum h = Planck's constant
From this,
we can get the uncertainty in position as:
Δx ≥ h/4πΔp Plug in the given values to get the uncertainty in position:
Δx ≥ (6.626 x 10-34 J·s)/(4π(2 x 106 m/s)(0.009))Δx ≥ 0.0000027 m
Therefore, the maximum precision with which the position of the proton can be measured is 0.0000027 m.
To know more about proton visit:
https://brainly.com/question/12535409
#SPJ11
A mass of 210 g is attached to a spring of constant 83.2 N/m. If
the mass is set into undamped SHM of amplitude 0.50 m what will be
the maximum speed of the mass during the SHM cycle?
The maximum speed of the mass during the SHM cycle is approximately 6.402 m/s..In simple harmonic motion (SHM), the maximum speed of the mass can be determined using the formula v_max = Aω
where v_max is the maximum speed, A is the amplitude of the motion, and ω is the angular frequency.
The angular frequency can be calculated using the formula:
ω = √(k/m)
where k is the spring constant and m is the mass.
Amplitude (A) = 0.50 m
Spring constant (k) = 83.2 N/m
Mass (m) = 210 g = 0.210 kg
First, we need to convert the mass to kilograms (kg) for consistent units.
Using the formula for angular frequency:
ω = √(k/m) = √(83.2 N/m / 0.210 kg) ≈ 12.803 rad/s
Now, we can calculate the maximum speed:
v_max = Aω = 0.50 m * 12.803 rad/s ≈ 6.402 m/s
To know more about SHM , click here:-
https://brainly.com/question/28230148
#SPJ11
identify the false statement. plate movement is influenced by
The FALSE statement is plate movement is influenced by Ridge push, in which the elevated rocks at the ridge axis push on rocks farther from the ridge. Therefore, option B is the correct answer.
While the other options (A, C, and D) correctly describe factors that influence plate movement, ridge push is not an accurate explanation of plate tectonics.
Ridge push was initially proposed as a mechanism for plate movement, suggesting that the elevated rocks at the mid-ocean ridges push the adjacent plates away from the ridge axis. However, current scientific understanding indicates that ridge push is a relatively minor factor in plate motion compared to other mechanisms.
The main driving forces behind plate movement are mantle convection (option A), mantle plumes (option C), and slab pull (option D). Mantle convection involves the movement of material within the Earth's mantle, creating shear at the base of plates and influencing their motion.
Mantle plumes result from the uprising of hot rock from the deep mantle, causing melting at the base of the lithosphere. Slab pull occurs when a denser oceanic plate sinks into the mantle, exerting a pulling force on the rest of the plate.
In conclusion, the false statement is B. Ridge push is not a major influence on plate movement. Rather, mantle convection, mantle plumes, and slab pull play more significant roles in driving plate tectonics.
To know more about Ridge push refer here:
https://brainly.com/question/13194433#
#SPJ11
Complete Question:
Identify the FALSE statement. Plate movement is influenced by
A. mantle convection, which creates shear at the base of plates.
B. ridge push, in which the elevated rocks at the ridge axis push on rocks farther from the ridge.
C. mantle plumes, which are created when hot rock rises up from the deep mantle and creates melting at the base of the lithosphere.
D. slab pull, in which the downgoing oceanic plate exerts a pull on the rest of the plate.
verlically upward at the same speed. The scesnd ball just misses the baleony on the way bown. ta) What in the ditterence in the two bali's time in the alt? 1 ) (b) What is the velsoty of racti ball at it strikes the ground? bovt 1 magnitude m/s directoon damant o ball 2 mogritudo, directions Ie. How far apsit are the balls o. 500 s after they are thrown?
Given: Two balls are thrown vertically upward with the same speed, u = 24.5 m/s
The second ball just misses the balcony on the way down.The time taken by each ball to reach maximum height is t. The velocity of each ball when it reaches maximum height is zero. We can use the kinematic equation:
[tex]$v=u+at$$[/tex]
Where, v = final velocityu = initial velocitya = accelerationt = time takenLet us take the upward direction as positive.
So, acceleration, a = -9.8 m/s2a)What is the difference in the two balls' time in the air? Initially, both the balls are thrown upwards with the same speed and in the same direction. Therefore, the initial velocity of both balls is the same.
u1 = u2 = 24.5 m/sAt maximum height, the velocity of both balls will be zero.
v1 = v2 = 0
Using the above kinematic equation, we can find the time taken for the balls to reach maximum height.
0 = 24.5 - 9.8tt1 = 24.5/9.8 = 2.5 s
Therefore, both balls will take 2.5 s to reach maximum height.Time taken for ball 1 to hit the ground:
[tex]$$2t_1 = 2\times2.5 = 5s$$[/tex]
The time taken for ball 2 to hit the ground will be more than 5s. Therefore, the difference in time is greater than zero.b)What is the velocity of each ball when it strikes the ground?We can use the same kinematic equation to find the final velocity of the balls when they hit the ground.
v = u + atBall
1:When the ball strikes the ground, its final velocity, v1 = ?Initial velocity, u1 = 24.5 m/sAcceleration, a = -9.8 m/s2Time taken, [tex]t = 5 s$$v_1 = 24.5 - 9.8\times5 = -24.5 m/s$$[/tex]
Here, negative sign indicates that the velocity of the ball is in the downward direction.Ball 2:When the ball strikes the ground, its final velocity,
v2 = ?Initial velocity, u2 = 24.5 m/sAcceleration, a = -9.8 m/s2Time taken, t > 5 s. Let's say
[tex]t = 6 s$$v_2 = 24.5 - 9.8\times6 = -38.3 m/s$$[/tex]
Here, negative sign indicates that the velocity of the ball is in the downward direction.
c)How far apart are the balls 5 s after they are thrown?We know that both balls are thrown vertically upward with the same speed. Therefore, their paths will be symmetric about the maximum height. After 5 s, ball 1 will be at some height, h1 above the ground and ball 2 will be at the same height, h2 below the maximum height.The total time taken by the ball to travel from the ground to maximum height and then back to the ground is 5 s for both balls.So, time taken to reach maximum height, t1 = 2.5 sDistance traveled by ball 1 in 2.5
[tex]s:$$h_1 = ut_1 + \frac{1}{2}at_1^2$$$$h_1 = 24.5\times2.5 - \frac{1}{2}\times9.8\times(2.5)^2$$$$h_1 = 30.6 m$$[/tex]
Distance traveled by ball 2 in 2.5 s will be the same as the distance traveled by ball 1 in the first 2.5 s.So, distance between the balls after
5 [tex]s:$$30.6 + 30.6 = 61.2m$$[/tex]
Therefore, the balls will be 61.2 m apart 5 s after they are thrown.
To know more about kinematic visit:
https://brainly.com/question/26407594
#SPJ11
What is acceleration equal to for a pendulum, assuming a small
angle?
A. a = -1/gθ
B. a = -g/θ
C. a = -θ/g
D. a = -gθ
The correct answer for the acceleration of a pendulum, assuming a small angle, is option A: a = -1/gθ.
When a pendulum swings back and forth, its motion can be approximated as simple harmonic motion (SHM) if the angle of displacement from the vertical position is small. In SHM, the acceleration of the object is directly proportional to its displacement but in the opposite direction.
In the case of a pendulum, the displacement is given by θ, which represents the angular displacement from the vertical position. The negative sign indicates that the acceleration is in the opposite direction of the displacement.
The acceleration due to gravity is represented by g, which acts as a constant in this equation.
Therefore, the correct equation for the acceleration of a pendulum in terms of the angle of displacement (θ) is:
a = -1/gθ
This equation shows that the acceleration is inversely proportional to the angle of displacement and is multiplied by the reciprocal of the gravitational constant.
So, option A is the correct answer
To know more about pendulum click on below link :
https://brainly.com/question/31958396#
#SPJ11
A mass-spring-dashpot has the total energy E = 1/2 m v² + 1/2 k x², where v = dx/dt. In class we showed that E is constant when = 0. Show that when > 0, energy is always dissipated. Hint: look at dE/dt and use the governing differential equation
A mass-spring-dashpot has the total energy E = 1/2 m v² + 1/2 k x², where v = dx/dt. In class, we showed that E is constant when = 0. Show that when > 0, energy is always dissipated.
Hint: look at dE/dt and use the governing differential equation A mass-spring-dashpot is an instrument that can be used to measure dynamic mechanical properties. It can be used to determine stiffness, damping, and hysteresis. It is made up of a mass, a spring, and a dashpot (or damper).
It is commonly used in mechanical engineering to study the behavior of mechanical systems.There are two types of mass-spring-dashpots: linear and nonlinear. Linear mass-spring-dashpots are the most common type. They are used in many applications, including vibration isolation, shock absorption, and dynamic analysis.
Nonlinear mass-spring-dashpots are used in applications where the damping force changes with displacement or velocity.In class, it was demonstrated that the total energy E = 1/2 m v² + 1/2 k x² of a mass-spring-dashpot is constant when = 0. This implies that energy is conserved when there is no external force acting on the system.When > 0, energy is always dissipated.
To know more energy visit:
https://brainly.com/question/1932868
#SPJ11
Use the table on Black holes we used in class and: 1AU=93,000,000 miles; mass of Sun =2x 10∧30 kg, mass of Earth =6×10∧24 kg, mass of Moon =7.3×10∧22 kg, moon radius =1080 miles, Earth radius =4000 miles; answer the following:
How many times larger in radius is Earth than a stellar black hole?
The radius comparison between Earth and a stellar black hole can be estimated using the Schwarzschild radius formula.
To compare the size of Earth to that of a stellar black hole, we need to determine the radius of the black hole. However, without specific information from the table you mentioned, we can't perform an exact calculation. Instead, I can provide a general understanding of the scale difference between Earth and a stellar black hole.
A stellar black hole is formed from the collapse of a massive star. The radius of a black hole is determined by its event horizon, which is the boundary beyond which nothing can escape its gravitational pull. For simplicity, let's assume we have a stellar black hole with a mass of 10 times that of the Sun (2x10^31 kg).
To find the approximate radius of this black hole, we can use the Schwarzschild radius formula:
Rs = (2GM) / c^2
Where:
Rs is the Schwarzschild radius,
G is the gravitational constant (6.67430 × 10^-11 m^3 kg^-1 s^-2),
M is the mass of the black hole,
c is the speed of light (299,792,458 m/s).
Substituting the values into the equation:
Rs = (2 * 6.67430 × 10^-11 * 2x10^31) / (299,792,458)^2
Calculating the expression will give us the approximate radius of the stellar black hole.
Once we have the radius of the Earth (4,000 miles or 6,437 km), we can compare the two values to determine how many times larger in radius Earth is compared to the stellar black hole. However, please note that without the specific data from the table, this calculation will be an estimation.
If you can provide the specific values or data from the table, I can perform a more accurate calculation and provide a more precise comparison between Earth and a stellar black hole.
To learn more about black hole, click here: https://brainly.com/question/31869219
#SPJ11
The orbital speed of a star about the center of the Milky Way is determined by its distance from the galactic center and the amount of galactic mass within its orbital distance. The orbital speed of our sun is about 220 km/s. It is possible to observe a nearby star moving with a speed (observed by us) in which of the following ranges: 1. 10 - 40 km/s II. 100-300 km/s III. > 1000 km/s I, II and III I only Il only I and II
It is possible to observe a nearby star moving with a speed (observed by us) in the following ranges: I. 10 - 40 km/sII. 100-300 km/s. The correct option is I and II.
Stars move in an orbit around the center of the Milky Way. A star's orbital speed around the galactic center is dictated by its distance far from the galactic center and the quantity of galactic mass inside its orbital distance. Our sun's orbital speed is around 220 km/s.
The observed speed of a star will depend on its position relative to Earth, and so its distance from the galactic center and from us, and the mass distribution of the Milky Way. There are numerous factors that can cause a star's speed to vary. As a result, a nearby star traveling at a speed (seen by humans) in the ranges that follow is I. 10 - 40 km/sII. 100-300 km/s.Thus, the correct option is I and II.
You can learn more about the speed at: brainly.com/question/6280317
#SPJ11
Suppose we have an electron moving perpendicular to a B-field along a circular path of radius 12.4 cm. If imposition of an E-field of 19.7kV/m makes the path straight, what is the value of B ? Bfield= ErrorAnalysis Suppose our E-field measurement has an uncertainty of 0.25kV/m and our radius of curvature measurement has an uncertainty of 0.4 cm. What is the total uncertainty associated with the magnetic field we just calculated? dBtot= Note: You can earn partial credit on this problem.
The value of the magnetic field (B) is approximately 1.60 T. The total uncertainty associated with the magnetic field calculation (dBtot) is approximately 0.026 T.
The Lorentz force equation is given by F = qE, where F is the force, q is the charge of the electron, and E is the electric field. In circular motion, the centripetal force required to keep the electron moving along a curved path is provided by the magnetic force, which is given by F = qvB, where v is the velocity of the electron and B is the magnetic field.
Setting these two forces equal, we have qE = qvB. The charge of an electron (q) cancels out, giving us E = vB. Since the path becomes straight when the electric field is applied, we have E = 19.7 kV/m. Rearranging the equation, we get B = E / v.
To find the value of B, we need to determine the velocity of the electron. The velocity can be calculated using the formula v = 2πr / T, where r is the radius of the circular path and T is the time taken for one complete revolution. The time taken for one complete revolution is equal to the period (T) of the motion, which is the time it takes to travel a full circle.
Once we have the value of v, we can calculate the value of B by dividing the electric field (E) by v. Substituting the given value of E (19.7 kV/m) and the calculated value of v, we find B ≈ 1.60 T.
To calculate the total uncertainty associated with the magnetic field, we need to consider the uncertainties in the measurements of E and the radius of curvature. The uncertainty in B can be calculated using the formula:
dBtot = [tex]\sqrt{(dB/dE)^2 * dE^2 + (dB/dr)^2 * dr^2}[/tex]],
where dB/dE is the derivative of B with respect to E, dE is the uncertainty in E, dB/dr is the derivative of B with respect to r, and dr is the uncertainty in r.
By taking the derivatives and plugging in the given values of dE (0.25 kV/m) and dr (0.4 cm), we can calculate the total uncertainty in the magnetic field as dBtot ≈ 0.026 T.
Therefore, the value of the magnetic field is approximately 1.60 T, with a total uncertainty of approximately 0.026 T.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
If a standing wave on a string is produced by the superposition of the following two waves: y1 = A sin(kx - wt) and y2 = A sin(kx + wt), then all elements of the string would have a zero acceleration (ay = 0) for the first time at: O t = T/2 "where T is the period" O t = (3/2)T "where Tis the period O t = T where T is the period" O t = (1/4)T "where Tis the period"
To find the time at which all elements of the string have zero acceleration, we need to consider the superposition of the two waves.
In this case, y1 = A sin(kx - wt) and y2 = A sin(kx + wt).
Taking the sum of the two waves, we have:
y = A sin(kx - wt) + A sin(kx + wt).
To determine when the acceleration is zero, we need to find the time at which the second derivative of y with respect to time (ay) is zero.
A w^2 [sin(kx + wt) - sin(kx - wt)] = 0.
For the expression to equal zero, one of the factors must be zero:
sin(kx + wt) - sin(kx - wt) = 0.
Now, we can use the trigonometric identity sin(A) - sin(B) = 2 cos((A + B)/2) sin((A - B)/2):
2 cos((kx + wt + kx - wt)/2) sin((kx + wt - kx + wt)/2) = 0.
Simplifying further:
2 cos(2kx/2) sin(2wt/2) = 0.
cos(kx) sin(wt) = 0.
For the product of two values to be zero, either cos(kx) or sin(wt) must be zero:
cos(kx) = 0:
This occurs when kx = (2n + 1)π/2, where n is an integer.
sin(wt) = 0:
Now, let's focus on the first case: cos(kx) = 0.
For cos(kx) to be zero, kx must be equal to (2n + 1)π/2:
kx = (2n + 1)π/2.
Solving for x:
x = (2n + 1)π/(2k).
Since x is a constant value for each element of the string, we can rewrite the equation as:
(2n + 1)π/(2k) = constant.
2n + 1 = 2kC/π.
To learn more about acceleration follow:
https://brainly.com/question/2303856
#SPJ11
Conservation of energy: A 5.00-kg block is moving at 5.00 m/s along a horizontal frictionless surface toward an ideal massless spring that is attached to a wall. After the block collides with the spring, the spring is compressed a maximum distance X, measured in meters. (k=270.33) a. Find the kinetic energy of the block before collison b. Find the potential energy stored in the spring c. Find how much is the spring compressed d. What is the force on spring when spring is compressed about 0.05 m
Conservation of energy is a fundamental principle of physics that states that the total energy of a system remains constant when no external work is done on it. This principle can be used to solve problems related to the motion of an object, such as the collision of a block with a spring.
Let us discuss the given problem step-by-step:
Mass of the block, m = 5.00 kg
Initial velocity of the block,
v = 5.00 m/s
Spring constant
k = 270.33 N/m
Maximum compression of the spring, X = ? (to be determined)Force on the spring,
F = ? (to be determined)a.
Kinetic energy of the block before collision:
The kinetic energy of the block before collision can be calculated using the formula,Kinetic energy = (1/2) mv²
where m is the mass of the block and v is its velocity.
Kinetic energy = (1/2) x 5.00 x (5.00)²
Kinetic energy = 62.50 JT
he kinetic energy of the block before collision is 62.50 J.b.
Potential energy stored in the spring:
The potential energy stored in the spring can be calculated using the formula,
Potential energy = (1/2) kX²
where k is the spring constant and X is the maximum compression of the spring.
Potential energy = (1/2) x 270.33 x X²c.
Compression of the spring:
The maximum compression of the spring can be calculated using the potential energy stored in the spring.
From part (b)
Potential energy =[tex](1/2) kX²62.50 J = (1/2) x 270.33 x X²X² = (2 x 62.50) / 270.33X² = 0.0460X = √0.0460X = 0.214 m[/tex]
the spring is compressed by 0.214 m.d. Force on the spring:
The force on the spring can be calculated using the formul
,F = kX
where k is the spring constant and X is the compression of the spring.
F = 270.33 x 0.05F = 13.52 N
The force on the spring when it is compressed by 0.05 m is 13.52 N.
The given problem has been solved completely.
The kinetic energy of the block before collision was found to be 62.50 J.
The potential energy stored in the spring was calculated to be (1/2) x 270.33 x X², where X is the maximum compression of the spring.
The spring was compressed by 0.214 m.
The force on the spring when it is compressed by 0.05 m was found to be 13.52 N.
To know mpre about energy visit:
https://brainly.com/question/1932868
#SPJ11
2. A puck with mass 2.0 kg traveling east at 12.0 m/s strikes a puck with a mass of 4.0 kg that is moving at 12 m/s north. The 2.0 kg puck exits the collision in a direction that is 40deg. north of east at a velocity of 12.0 m/s. m 1=2.0 kg m2=4.0 V1=12.0 m/s V2=12misN 4. What is the 4.0 kg puck's final east-west velocity? θ=40
∘
5. What is the 4.0 kg puck's final north-south velocity? 6 and 7 . What is the 4.0 kg puck's final velocity including direction?
According to the conservation of kinetic energy, we have:
KE_initial = KE_final 144 J = 144
KE_initial = (1/2) * 2.0 kg * (12.0 m/s)^2 + (1/2) * 4.0 kg * (0 m/s)^2
Simplifying the equation:
KE_initial = 144 J
Since the 2.0 kg puck exits the collision with a velocity of 12.0 m/s, its final kinetic energy is given by:
KE_final = (1/2) * m1 * v_final^2
Substituting the given values:
KE_final = (1/2) * 2.0 kg * (12.0 m/s)^2
Simplifying the equation:
KE_final = 144 J
To know more about kinetic energy please click :-
brainly.com/question/999862
#SPJ11