The _____ is the mass of tissue lying beside the fetus that allows nutrients and oxygen to pass from the mother's blood to the baby's blood

The mass of precipitate formed if a solution containing 2.34 g of cesium hydroxide is added to a solution containing a large excess of tiso4 is 0.6387 g

Mass of CsOH = 2.34 g

Number of moles of CsOH = 149.9 g / mol

Molar mass of CsOH =  Mass of CsOH / Number of moles of CsOH

                                    = 2.34 / 149.9

Molar mass of CsOH is 0.0156 mol

2 CsOH + TiSO4 → Ti(OH)2 + CsSO4

In this reaction 2 moles of CsOH gives 1 mole of Ti(OH)2

0.0156 mol of CsOH will produce, 0.0156 / 2 = 0.0078 mol

0.0156 mol of CsOH will produce 0.0078 mol of Ti(OH)2

Mass of Ti(OH)2 =  Molar mass of Ti(OH)2 / Number of moles of Ti(OH)2

                            = 0.0078 * 81.88

                            = 0.6387 g

Mass of Ti(OH)2 formed is 0.6387 g

Learn more about mass of precipitate on  

https://brainly.com/question/24893122

#SPJ4                  

The mass of precipitate formed is 0.90441 g

cesium hydroxide is added to a solution containing a large excess of TiSo4

The chemical reaction is

2CsOH + TiSo4  →  Ti(OH)2 + CsSo4

The above reaction the Ti(OH)2 is a precipitate formed

Molar mass = mass of a substance / mass of one mole

Mass of CsOH = 2.34 / 149.912

Mass of CsOH = 0.0156 mol

The above reaction 2 mol of cesium hydroxide yield 1 mol of titanium hydroxide

Then, 0.0156 mol of CsOH yield 0.0156 / 2 = 0.0078 mol of Ti(OH)2

The mass of Ti(OH)2 is 115.95

0.0078 mol of Ti(OH)2 = 115.95 X 0.0078

                                      = 0.90441

Learn more about the mass of precipitate on

https://brainly.in/question/738992.

Epimerization and Enediol rearrangement are the two most common unwanted side reactions which can occur when monosaccharides are treated with base.

Epimerization is a process in stereochemistry in which there is a change in the configuration of only one chiral centre. As a result, a diastereomer is formed. The classical example of this in medicine is tetracycline. In acidic conditions around pH 4, tetracycline readily undergoes epimerization at position 4, and an inactive 4-epitetracycline is produced, which on dehydration forms 4-epianhydrotetracycyline, a highly toxic product. This toxic compound can also be formed from acid catalysed (at lower pH) dehydration of tetracycline via anhydrotetracycline.

Enediol rearrangement is a  transformation which occurs at basic medium and allows the conversion of epimers, defined as isomeric forms that differ in the position of the hydroxyl group at C-2. In this way it is possible to transform through the enediol intermediate glucose to mannose and vice versa.

Another important isomerization process through the enediol rearrangement is the interconversion of glucose and fructose. Thus, the enolization proceeds by migration of proton at position 2, to carbon at 1.

Monosaccharides contain both alcohol and carbonyl functional groups. This allows monosaccharides to undergo many of the reactions typical for these functional groups. In particular, alcohols can be converted to esters, converted to ethers, converted to acetals, or oxidized. Carbonyls can be reacted with nucleophiles, be reduced to form alcohols, or be oxidized to form carboxylic acids.

To learn more about Epimerization : https://brainly.com/question/11381631
#SPJ4

Answer:

Atom

Explanation:

That describes an ATOM

144 mL of fluorine gas is required to react with 1.28 g of calcium bromide to form calcium fluoride and bromine gas at STP.

The ideal gas law states that the pressure of gas is directly proportional to the volume and temperature of the gas.

PV = nRT

where,

P = Presure

V = Volume in liters

n = number of moles of gas

R = Ideal gas constant

T = temperature in Kelvin

Here,

P = 1 atm  [At STP]

R = 0.0821 atm.L/mol.K

T = 273 K  [At STP]

Now first find the number of moles

F₂  +  CaBr₂  →  CaF₂  +  Br₂

Here 1 mole of F₂ reacts with 1 mole of CaBr₂.

So,  199.89 g CaBr₂ reacts with  = 1 mole of F₂

1.28 g of CaBr₂ will react with = n mole of F₂

[tex]n = \frac{1.28\g \times 1\ \text{mole}}{199.89\ g}[/tex]

n = 0.0064 mole

Now put the value in above equation we get

PV = nRT

1 atm × V = 0.0064 × 0.0821 atm.L/mol.K × 273 K

V = 0.1434 L

V ≈ 144 mL

Thus from the above conclusion we can say that 144 mL of fluorine gas is required to react with 1.28 g of calcium bromide to form calcium fluoride and bromine gas at STP.

Learn more about the Ideal Gas here: https://brainly.com/question/20348074

#SPJ4

If the volume of the container were increased to 4.0 L, more N₂ and H₂ would be produced (Option D)

This is simply defined as a state in a chemical system where there is no observable change in the properties of the system with time.

A French scientist postulated a principle which helps us to understand a chemical system in equilibrium.

The principle states as follow:

If a an external constraint such as change in temperature, pressure or concentration is imposed on a system in equilibrium, the equilibrium will shift so as to neutralize the effect.

From the principle given above, we can see that volume does not affect equilirium position.

However, from Boyle's law, we understood that pressure and volume are in invest relationship.

Thus, increasing volume simply means decreasing pressure.

A decrease in pressure will favors the side where there is an increase in volume.

Let us consider the equation from the question:

N₂(g) + 3H₂(g) <=> 2NH₃(g)

Thus, we can conclude that increasing the volume (i.e decreasing the pressure) of the reaction will favors the backward reaction, hence, more N₂ and H₂ would be produced.

Learn more about chemical equilibrium:

https://brainly.com/question/4289021

#SPJ1

Answer:

Density = 0.27 decagrams/cm³

Explanation:

From conversion tables, we know that;

1 g/cm³ = 0.1 decagrams/cm³

We are given;

Density of aluminium = 2.7 g/cm³

Thus;

Density = 2.7 * 0.1

Density = 0.27 decagrams/cm³

Answer:

270000 decagrams/m³

Explanation:

1.

Density=mass/Volume

=2.7g/1cm3

=(2.7/1000)/(1/1000000)

=2.7x1000

Density=2700kg/ m3

= 270000 decagrams/m³

2.

1000g=1kg

1g=1/1000kg

1cm3= ? m3

100cm=1m

1cm=1/100 m

1cm3=1/1000000 m3

The given example is a chemical reaction.

The contents (separated as reactants and products) :

[tex]\begin{tabular}{c | l}Reactants & Products \\\cline{1-2}Chlorine & Sulfuric Acid \\Water & Hydrochloric Acid \\Sulfur Dioxide & \\\end{tabular}[/tex]

The written reaction is :

[tex]\boxed {Cl + SO_{2} + H_{2}O \implies HCl + H_{2}SO{4}}[/tex]

I hope it helped you solve the problem.

Good luck on your studies!

a. There are 1.85 moles in 2.00 × 10² g of silver (Ag).

b. There are 0.618 moles in 37.1 g of silicon dioxide (SiO₂)

The molar mass is the mass in grams of 1 mole of particles, that is, the mass in grams of 6.02 × 10²³ particles. The units are g/mol.

We want to calculate the number of moles represented by different masses of different substances. In each case, the conversion factor between mass and moles is the molar mass.

The molar mass of silver is 107.87 g/mol.

2.00 × 10² g × (1 mol/107.87 g) = 1.85 mol

The molar mass of silicon dioxide is 60.08 g/mol.

37.1 g × (1 mol/60.08 g) = 0.618 mol

a. There are 1.85 moles in 2.00 × 10² g of silver (Ag).

b. There are 0.618 moles in 37.1 g of silicon dioxide (SiO₂)

Learn more about molar mass here: https://brainly.com/question/21334167

#SPJ1

The molarity of the solution is 0.528 mol/l.

What is molarity?

The molarity of any solution is the number of moles per liter of the solution.

Given,

The molality of the solution is 0.0480 m Lif

The density of the solution is 1.10 g/ml

Step 1: 0.0480 moles of LiF were present in 1 kg solvent.

Mass of 0.0480 moles of LiF = 0.0480 mol × 26 g/mol = 1.248 g

Mass of the solution (m)=  1 kg (solvent) + 1.248 g(solute)

m = 1000 g + 1.248 g = 1001.248 g

Step 2: Find the volume of the solution

Step 3: Calculating the molarity

Thus, the molarity of the solution is 0.528 mol/l.

Learn more about the molarity with the help of the given link:

https://brainly.com/question/28149625

#SPJ4

10

For every one NADH molecule oxidized at complex i ,  10 total hydrogen ions are pumped across all of the complexes from the mitochondrial matrix to the inner membrane space.

4 proteins

To learn more about mitochondrial matrix visit:

https://brainly.com/question/1602075

#SPJ4

Mass of CH₄ is 10.591 g.

The molar mass is a crucial characteristic of the material that is independent of sample size. The coherent unit of molar mass in the International System of Units (SI) is kg/mol. However, molar masses are usually generally given in g/mol due to historical considerations.

A chemical compound's molar mass is calculated by dividing its mass by the number of moles of the substance that make up the sample.

Δg = 587.9 KJ

CH₄ Molar mass = 16.05 g/mol

mol CH₄ = Δg / ΔH°

              = 587.9 / 890.3 KJ/ mol

              = 0.6603 mol CH₄

Mass CH₄ = 0.6603 × 16.05 g/mol

                = 10.591 g

Therefore, the mass of  CH₄ is 10.591 g.

Learn more about molar mass here:

https://brainly.com/question/24236159

#SPJ4

Answer:

See below

Explanation:

Temperature is basically a measure of the average kinetic energy of the particles in the sample ....so as  temp goes up, kinetic energy increases

The amount of current required to produce 75. 8 g of iron metal from a solution of aqueous iron (iii)chloride in 6. 75 hours is 168.4A.

The amount of Current required to deposit a metal can be find out by using The Law of Equivalence. It states that the number of gram equivalents of each reactant and product is equal in a given reaction.

It can be found using the formula,

m = Z I t

where, m = mass of metal deposited = 75.8g

            Z = Equivalent mass / 96500 = 18.6 / 96500 = 0.0001

             I is the current passed

              t is the time taken = 75hour = 75 × 60 = 4500s

On subsituting in above formula,

75.8 = E I t / F

⇒ 75.8 = 0.0001 × I × 4500

⇒ I = 168.4 Ampere (A)

Hence, amount of current required to deposit a metal is 168.4A.

Learn more about Law of Equivalence here, https://brainly.com/question/13104984

#SPJ4

The net ionic equation is written as H^+(aq) + OH^-(aq) -------> H2O(l)

The term net ionic equation refers to the equation that shows the ions that underwent a change in the reaction. We have to note that the reaction species here must be ionic species which are able to dissociate into ions in solutions.

Now the first step is to put down the molecular equation. The molecular equation shows the reaction of the compounds as follows;

HCI (aq) + NaOH (ag)-> NaCI (aq) +H2O(l)

Next, we put own the complete ionic reaction equation as follows;

H^+(aq) + Cl^-(aq) + Na^+(aq) + OH^-(aq) -------> Na^+(aq) + + Cl^-(aq) + H2O(l)

Next we have the net ionic equation;

H^+(aq) + OH^-(aq) -------> H2O(l)

Learn more about ionic reaction equation:https://brainly.com/question/21368817

#SPJ1

The temperature of the lab is assumed at 25°C while calculating Ksp. Pressure of the lab is assumed at 1 atm normal atmospheric conditions while calculating Ksp.

If we increase the temperature of the solvent, the average kinetic energies of the molecules start increases. Hence, the solvent is more able to dislodge more molecules from the surface of the solute. Thus, by increasing the temperature the solubilities of substances also increases. Temperature is directly proportional to the solubility.

As we goes on increasing the pressure of a gas, the collision between the molecules start increasing and thus the solubility goes up, as we decrease the pressure, the number of collision decreases thus solubility goes down.

Thus, with further increase in the temperature and pressure the Ksp value changes. Thus, temperature of the lab is assumed at 25°C while calculating Ksp. Pressure of the lab is must be 1 atm normal atmospheric conditions while calculating Ksp.

learn more about solubility:

https://brainly.com/question/14366471

#SPJ4

The balanced overall reaction from these unbalanced half-reactions is given  in following steps ,

Step 1 : [tex]Sn[/tex] → [tex]Sn^{+2}+ 2e^{-}[/tex]  

Step 2 : [tex]Ag^{+}[/tex] + [tex]e^{-}[/tex] →  [tex]Ag[/tex]

 [tex]2Ag^{+} + 2e^{-}[/tex] → [tex]2Ag[/tex]

Overall reaction : [tex]Sn[/tex] + [tex]2Ag^{+}[/tex] → [tex]Sn^{+2}[/tex] + [tex]2Ag[/tex]

The equation in which number of atoms of elements in reactant side is equal to the number of atoms of elements in product side is called balanced chemical equation .

This step is oxidation half-reaction in which loss of electron is takes place .

Second steps is reduction reaction in which fain of electrons is takes place. We multiple second  half-reaction by two to make equal number of electrons in both steps to cancel out the electrons from the equation.

learn more about half-reaction

https://brainly.com/question/8762149

#SPJ4

If the dehydration reaction of an alcohol is successful. The changes would be seen in the IR spectrum for the product compared to the starting material are as,

In dehydration reaction of alcohol (  O-H and  C-O bond ) contain , the water molecule ( [tex]H_{2}O[/tex] ) is release from the reactant and C-C double bond is form which is known as alkene in the product .

The reactant and product have different structure. To determine the structure of the compound IR spectroscopy is used. In IR spectrum the peak corresponds to 3400-3600 cm is missing in the product of  dehydration reaction of an alcohol. It means  O-H band is disappear from stating material.

learn about IR SPECTRUM

https://brainly.com/question/15452269

#SPJ4

At equilibrium the concentrations of:

[HSO₄⁻] = 0.10 M;

[SO₄²⁻] = 0.037 M;

[H⁺] = 0.037 M;

There is initially very little H+ and no SO₄²⁻ in the solution. A salt is KHSO₄⁻. All KHSO₄⁻ will split apart into K⁺ and HSO₄⁻ ions. [HSO₄⁻] will initially be present at a concentration of 0.14 M.

HSO₄⁻ will not gain H⁺ to produce H₂SO₄ since H₂SO₄ is a strong acid.  HSO₄⁻ may act as an acid and lose H⁺ to form SO₄²⁻. Let the final H⁺ concentration be x M. Construct a RICE table for the dissociation of HSO₄²⁻.

R   [tex]HSO_4^-[/tex]    ⇄  [tex]H^+ + SO_4^2^-[/tex]

I    [tex]0.14[/tex]

C   [tex]- x[/tex]               [tex]+x[/tex]       [tex]+x[/tex]

E   [tex]0.14-x[/tex]        [tex]x[/tex]         [tex]x[/tex]

[tex]K_a = 1.3[/tex] × [tex]10^-^2[/tex] for [tex]HSO^-_4[/tex] . As a result,

[tex]\frac{[H^+]. [SO_4^2^-]}{HSO_4^-} = K_a[/tex]

[tex]K_a[/tex] is large. It is no longer valid to approximate that [tex][HSO^-_4][/tex] at equilibrium is the same as its initial value.

[tex]\frac{x^2}{0.14-y} = 1.3 * 10^-^2[/tex]

[tex]x^2+1.3*10^-^2x - 0.14[/tex] × [tex]1.3[/tex] × [tex]10^-^2= 0[/tex]

Solving the quadratic equation for [tex]x , x \geq 0[/tex] since [tex]x[/tex] represents a concentration;

                             [tex]x=0.0366538[/tex]

Then, round the results to 2 significant figure;

Learn more about concentration here:

https://brainly.com/question/14469428

#SPJ4

A single slit with a width of 2019 * 109 m creates its initial minimal for 624 nm light at an angle of 18°.

How does diffraction work?

Waves spreading outward around obstructions are known as diffraction. Diffraction happens with sound, electromagnetic radiation like light, X-rays, and gamma rays, as well as with incredibly minuscule moving particles like atoms, neutrons, and electrons that exhibit wavelike qualities. Diffraction prevents the creation of sharp shadows as one of its effects. In order to spread out and illuminate regions at which a shadow is anticipated, light must be bent around corners, which is known as diffraction.

Calculation:

Provided for a single slit, m=1

λ = 624 *10⁻⁹

sinθ = sin 18⁰

Therefore,

asinθ=mλ

a = [tex]\frac{1 * 624 *10^{-9} }{sin 18}[/tex]

⇒a = 2019 *10⁻⁹ m

Therefore the width of a single slit is 2019 *10⁻⁹ m.

Learn more about single slit here:

https://brainly.com/question/14283857

#SPJ4

Na -k pumps couple atp hydrolysis with the transport of Na and k.

Both ions are used for active transport.

d. K+ and Na+ both diffuse into the cell along their concentration gradients and drive the transport of glucose.

Na/K pump is a pump located on the plasma membrane which uses ATP to move 3 Na ions out the cell and brings in 2 K ions into the cell. It is an example of primary active transport. As a consequence, concentration of Na is higher outside the cell, while K concentration is higher inside the cell.

Glucose is transported in the cell against its gradient, together with Na ions (symport) which move down their concentration gradient.

This is an example of secondary active transport because it uses the energy from the primary active transport to move other substances such as glucose against their own gradients.

Learn more about atp hydrolysis :https://brainly.com/question/13056741

#SPJ4

In a solution, when the concentrations of a weak acid and its conjugate base are equal: 1. the -log of the concentration of H+ and the -log of the Ka are equal.

Any acid that entirely ionises in solutions is considered a strong acid. When positioned, it emits the most hydrogen ions or protons.

Acids that don't entirely dissociate in solution are referred to as weak acids. In other words, any acid that is not a strong acid qualifies as a weak acid. The amount of dissociation determines how strong an acid is; the more dissociation, the stronger the acid.

Learn more about Acids and bases here:

https://brainly.com/question/27915098

#SPJ4

x2=x+2 at x=−1 and x=2 so we have no need to worry about the end-points

f(x)=x+2−x^2

df/dx=1–2x

and that is zero (indicating a maximum) at x=1/2

So the maximum distance is f(1/2)=2.5–0.25=2.25

learn more about maximum distance between curves here:

https://brainly.com/question/1603866

#SPJ4

The six p atomic orbitals combine to form 6 molecular orbitals. The correct option is A.

Molecular orbitals are the functions that tell the position of an electron in the orbital and the wave like property of the electron. This function is used to find the chemical and physical property of the element.

The six p atomic electrons will combine to constitute 6 molecular pi electrons. Because in benzene there are 6 pi orbitals. As benzene is planar, hexagonal and have sp2 hybridization. The remaining cyclic orbitals overlap to create 6 pi molecular orbitals.

Thus, the correct option is A. 6.

To learn more about molecular orbital, refer to the link:

https://brainly.com/question/13265432

#SPJ4

The question is incomplete. Your complete question is given below:

A. 6

B. 5

C. 4

D. 3

E. 2

Urea get decomposed during autoclaving, because it is volatile. It is filter sterilized and added aseptically to your autoclave media.

Can urea be autoclaved?

What is autoclave sterilization?

What is filter sterilization?

Learn more about autoclave media.

brainly.com/question/6211370

#SPJ4

Explanation:

(e)the heat is absorbed into the reaction .

The process in the nitrogen cycle converts nitrogen into its most polluting form will be "nitrification".

The biological process of nitrification turns ammonia into nitrite and nitrite into nitrate. The technique of denitrification, which turns nitrate into nitrogen gas, is such treatment option if requirements demand that the resultant nitrate be eliminated.

A surplus of nitrogen compounds could result in pollutants like ammonia and ozone that can affect plant growth, visibility, and human capacity to breathe. Excess nitrogen from the atmosphere that returns to earth could be damaging to the health of forests, soils, including streams.

Therefore, the process in the nitrogen cycle converts nitrogen into its most polluting form will be "nitrification".

To know more about nitrogen cycle

https://brainly.com/question/1615727

#SPJ4

Nitrogen (N2) and hydrogen (H2) gases react to form ammonia, which requires -99.4 J/K of standard entropy (ΔS°).

What is standard entropy?

The difference between the total standard entropies of the reaction mixture and the summation of the standard entropies of the outputs is the standard entropy change. Each entropy in the balanced equation needs to be compounded by its coefficient, as shown by the letter "n."

Calculation:

Balancing the given reaction following-

1/2 N₂(g) + 3/2 H₂ (g)→ NH₃ (g)

ΔS° = [1 mol x S° (NH₃)g] - [1/2 mol x S° (N₂)g] - [3/2 mol x S°(H₂)g]

Here S° = standard entropy of the system

Insert into the aforementioned equation all the typical entropy values found in the literature:

ΔS° = [1 mol x 192.45 J/mol.K] - [1/2 mol x 191.61 J/mol.K] - [3/2 mol x 130.684 J/mol.K]

⇒ΔS° = - 99.4 J/K

Therefore, the standard entropy, ΔS° is -99.4 J/K.

Learn more about standard entropy here:

https://brainly.com/question/14356933

#SPJ4

the first step in the mechanism is the acid-catalyzed generation of an enol and then electrophilic addition of bromine and cation is formed because of the destabilization effect of the electronegativity of oxygen

The ability of an atom or functional group to draw electrons to itself is known as an electronegativity in chemistry. An atom's electronegativity is influenced by both its atomic number and how far away from its charged nuclei its valence electrons are located.

The ability of an atom to draw shared electrons in a covalent connection is referred to as electronegativity. The stronger an element attracts the shared electrons, the higher its degree of electronegativity.

The propensity of an atom to attract other atoms when it is combined is known as an element's electronegativity. Additionally, a pair of bound electrons are shared. In contrast, an element's electropositivity refers to an atom's propensity to contribute electrons while also withdrawing from covalent connections.

To learn more about electronegativity please visit -
https://brainly.com/question/17762711
#SPJ4