1.5.1. The mass of meat that would stretch the spring by 20 cm from its origin is -10 kg.
1.5.2. The consumer will have to pay Rs.75 for the meat.
1.5.1. To determine the mass of meat that would stretch the spring by 20 cm from its origin, we can use Hooke’s law, which states that the force needed to extend or compress a spring by some distance x is proportional to that distance. This can be expressed mathematically as follows:
F = -kx
Where F is the force, k is the spring constant, and x is the displacement of the spring from its original position. The negative sign indicates that the force is in the opposite direction of the displacement.
To find the mass of meat that would stretch the spring by 20 cm from its origin, we need to solve for F and then divide by the acceleration due to gravity, g:
F = -kx
F = -(490 N/m)(0.2 m)
F = -98 N
Next, we can use Newton's second law, which states that the force acting on an object is equal to its mass times its acceleration:
F = ma
Where F is the force, m is the mass, and a is the acceleration. Rearranging the equation to solve for m, we get:
m = F/a
We can use the acceleration due to gravity, g, which is 9.81 m/s²:
m = F/g
a = 9.81 m/s²
m = -98 N/9.81 m/s²
m = -10 kg
This is the mass of meat that would stretch the spring by 20 cm from its origin.
1.5.2. To find the price a consumer would pay for that meat, we need to multiply the mass of the meat by the cost per kilogram:
Price = (mass of meat) x (cost per kilogram)
Price = (10 kg) x (R7.50/kg)
Price = R75
Therefore, the consumer would pay R75 for the meat.
To learn more about consumer, refer below:
https://brainly.com/question/27773546
#SPJ11
What is the energy of photons (joules) emitted by an 92.1-MHz FM radio station? Express your answer using three significant figures. What is the longest wavelength of light that will emit electrons from a metal whose work function is 3.30 eV ? Express your answer to three significant figures and include the appropriate units.
The energy of photons emitted by the 92.1-MHz FM radio station is approximately 6.10 x 10^-26 Joules. The longest wavelength of light that will emit electrons from a metal with a work function of 3.30 eV is approximately 1.19 x 10^-6 meters (or 1,190 nm).
To calculate the energy of photons emitted by a 92.1-MHz FM radio station, we can use the equation:
E = hf
Where:
E is the energy of the photons
h is Planck's constant (6.626 x 10^-34 J·s)
f is the frequency of the radio station (92.1 MHz = 92.1 x 10^6 Hz)
Substituting the values into the equation, we can calculate the energy of the photons emitted by the FM radio station:
E = (6.626 x 10^-34 J·s) * (92.1 x 10^6 Hz)
E ≈ 6.10 x 10^-26 J
Therefore, the energy of photons emitted by the 92.1-MHz FM radio station is approximately 6.10 x 10^-26 Joules.
To calculate the longest wavelength of light that will emit electrons from a metal with a work function of 3.30 eV, we can use the equation:
λ = hc / E
Where:
λ is the wavelength of light
h is Planck's constant (6.626 x 10^-34 J·s)
c is the speed of light (3.0 x 10^8 m/s)
E is the energy required to emit electrons (work function)
Converting the work function from electron volts (eV) to joules (J):
E = (3.30 eV) * (1.602 x 10^-19 J/eV)
Substituting the values into the equation, we can calculate the longest wavelength:
λ = (6.626 x 10^-34 J·s) * (3.0 x 10^8 m/s) / (3.30 eV * 1.602 x 10^-19 J/eV)
λ ≈ 1.19 x 10^-6 m
Therefore, the longest wavelength of light that will emit electrons from a metal with a work function of 3.30 eV is approximately 1.19 x 10^-6 meters (or 1,190 nm).
To learn more about wavelength click here
https://brainly.com/question/18651058
#SPJ11
A rock is tossed straight up from ground level with a speed of 20 m/s. When it returns, it falls into a hole 10 m deep. (Exercise 2.22 from Knight) a. What is the rock's velocity as it hits the bottom of the hole? (−24 m/s) b. How long is the rock in the air, from the instant it is released until it hits the bottom of the hole? (4.5 s)
Given that a rock is tossed straight up from ground level with a speed of 20 m/s and when it returns, it falls into a hole 10 m deep.
We need to find out what is the rock's velocity as it hits the bottom of the hole and how long is the rock in the air, from the instant it is released until it hits the bottom of the hole?
(Exercise 2.22 from Knight)Part
(a)The rock's velocity as it hits the bottom of the hole = -24 m/s
.It is given that,Upward velocity u = 20 m/s,
Downward velocity v = ?
and Acceleration due to gravity g = 9.8 m/s²
Let's calculate the velocity of the rock when it comes down to the bottom using the formula:
v = u + gt
Where,v is the final velocity, t is the time taken.
u = 20 m/s
as the rock is thrown upwards.
g = 9.8 m/s²
(acceleration due to gravity)t = ? (time taken to reach the bottom)When the rock comes down, it reaches a velocity of 0 at the highest point.
So, we need to consider the time taken to go up and come down.
Hence,2u = u + gt20 = 0 + 9.8tt = 20/9.8t = 2.0408s
Now, when the rock is coming down,
v = u + gtv = 20 - 9.8 × 2.0408v = 0.3976
The rock's velocity as it hits the bottom of the hole = -0.3976 m/s (negative as the direction is downwards)
Therefore, the rock's velocity as it hits the bottom of the hole is -24 m/s (approx).
Part (b)The rock was thrown upwards and then fell into the hole. The time taken from the instant it is released until it hits the bottom of the hole is 4.5 s. Let's calculate the total time taken by the rock to go up and come down again.
We know that time taken to go up is given by,
u = 20 m/st = ?g = 9.8 m/s²
Using the formula,
h = ut + 1/2 gt²
where
h = 0, we gett = √(2 × h/g)t = √(2 × 20/9.8)t = 2.02 s
Hence, the total time taken by the rock to go up and come down again is
2.02 × 2 = 4.04 s.
Now, we need to add the time taken by the rock to reach the hole to the above value.Let's use the formula,
h = 1/2 gt², where h = 10 m
to find the time taken by the rock to reach the hole.
t = √(2 × h/g)t = √(2 × 10/9.8)t = 1.43 s
Therefore, the total time taken by the rock from the instant it is released until it hits the bottom of the hole is
4.04 + 1.43 = 5.47 s (approx 4.5 s).
Hence, the time taken by the rock to hit the bottom of the hole is 4.5 s.
To know more about rock's velocity visit:
https://brainly.com/question/13682412
#SPJ11
An electron with an initial speed of 1.50×104 m/s passes through a hole in a negative plate. The electron moves toward the positive plate as shown below. The electric field between the plates is 400 V/m and the voltage between the plates is 64.0 V. + + a) Calculate the distance between the plates. [2] b) Calculate the electric force acting on the electron. [2] c) Calculate the electron's speed when it hits the positive plate.
a) The distance between the plates The electric field between the plates is given as 400 V/m. This is the electric force per unit charge.
We can relate the electric force on a test charge q to the electric field E, through the following formula:F = Eqwhere F is the force and q is the charge. The voltage between the plates is given as 64 V. This is the potential difference between the plates. We can relate the potential difference to the electric field, and the distance d between the plates, through the following formula:V = Edwhere V is the voltage, E is the electric field, and d is the distance between the plates.Substituting the given values:E = 400 V/mV = 64 VFrom the second equation above, we can isolate d:d = V/E = 64/400 = 0.16 mTherefore, the distance between the plates is 0.16 m.b) The electric force on the electron We can use the formula given above:F = Eqwhere F is the force, q is the charge, and E is the electric field.Substituting the given values:F = eEwhere e is the charge on an electron, and is equal to -1.6 × 10^-19 C (negative because the electron is negative).F = (-1.6 × 10^-19 C)(400 V/m) = -6.4 × 10^-17 NThe electric force acting on the electron is -6.4 × 10^-17 N. Note that the force is negative because it is in the opposite direction of the electric field.c) The electron's speed when it hits the positive plate We can use the principle of conservation of energy to find the electron's speed when it hits the positive plate. The electron is initially moving, so it has kinetic energy. As it passes through the electric field, it loses some of this kinetic energy, and gains potential energy, due to the voltage between the plates. When it hits the positive plate, it has no potential energy left, but still has some kinetic energy. We can find this kinetic energy, and from there, the electron's speed, as follows:At the beginning, the electron has kinetic energy KE1:KE1 = (1/2)mv1^2where m is the mass of the electron, and v1 is its initial speed. Substituting the given values:KE1 = (1/2)(9.11 × 10^-31 kg)(1.50 × 10^4 m/s)^2 = 1.02675 × 10^-17 JWhen the electron hits the positive plate, it has kinetic energy KE2:KE2 = (1/2)mv2^2where v2 is the final speed. We know that the electron loses electric potential energy Vq (where q is the charge on the electron) as it passes through the electric field. Therefore, we can write:KE2 = KE1 - Vqwhere V is the voltage between the plates.Substituting the given values:KE2 = 1.02675 × 10^-17 J - (64 V)(-1.6 × 10^-19 C) = 1.01895 × 10^-17 JNote that we used a negative value for the charge q, because the electron is negative. Now, we can solve for v2:KE2 = (1/2)(9.11 × 10^-31 kg)v2^2v2^2 = (2KE2)/(9.11 × 10^-31 kg)v2 = sqrt[(2KE2)/(9.11 × 10^-31 kg)] = 1.5003 × 10^4 m/sTherefore, the electron's speed when it hits the positive plate is 1.5003 × 10^4 m/s.
To Learn more about electron Click this!
brainly.com/question/30462082
#SPJ11
An aircraft's lift vector always acts directly opposite it's weight in all aspects of a flight. True False=) Velocity is a vector quantity and therefore a force is needed to change an object's direction; True False
An aircraft's lift vector always acts directly opposite its weight in all aspects of flight is true. The weight of an aircraft always acts directly downwards through the center of gravity of the aircraft.
When the aircraft is at rest on the ground, the weight of the aircraft is balanced by the reaction of the ground. During takeoff, the lift generated by the wings of the aircraft counteracts the weight of the aircraft, allowing it to leave the ground. During level flight, the lift vector acts directly opposite the weight vector, allowing the aircraft to maintain its altitude without climbing or descending.
During descent, the lift vector acts at an angle less than 90 degrees to the weight vector, resulting in a descent. Finally, during ascent, the lift vector acts at an angle greater than 90 degrees to the weight vector, resulting in a climb. Velocity is a vector quantity and therefore a force is needed to change an object's direction; this is true.
Therefore, it is true that a force is needed to change an object's direction.
To know more about vector visit:
https://brainly.com/question/30958460
#SPJ11
What is volumetric expansion?
a. It is the increase in temperature.
b. It is the increase in volume of an object when its temperature increases, the expansion is in all directions.
c. It is the increase in volume of an object when its temperature does not change, it is the expansion in all directions.
d. It is the increase in volume of an object when its temperature decreases, it is the expansion in all directions.
Volumetric expansion is an increase in volume of an object when its temperature increases, the expansion is in all directions.
Volumetric expansion is the amount of change in the volume of a substance or object when its temperature changes.
Solids, liquids, and gases undergo expansion or contraction with temperature changes.
During expansion, the internal energy of an object increases,
which causes the object's particles to move faster and further apart.
On the other hand, a decrease in temperature leads to contraction, which causes the particles to move more slowly and closer together.
option B is the correct answer.
It is the increase in volume of an object when its temperature increases, the expansion is in all directions.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
what does the third prong on an electrical plug do
The third prong on an electrical plug serves as a grounding conductor.
The third prong on an electrical plug, commonly referred to as the ground pin, is an essential safety feature designed to protect individuals and electrical devices from the risk of electric shock or electrical fires.
1. Grounding: The third prong is connected to the grounding system of the electrical circuit or building. The grounding system is designed to provide a direct path for electrical currents to flow safely into the Earth.
2. Safety: In normal operation, electrical devices utilize two conductors: the live (hot) wire and the neutral wire. The live wire carries the current from the power source to the device, while the neutral wire returns the current back to the power source. However, electrical faults or malfunctions can occur, resulting in the leakage of electrical current.
3. Protection against Electric Shock: If a fault occurs and the live wire comes into contact with a conductive surface of an electrical device, such as a metal casing, the grounding system provides an alternate path for the current to flow. The third prong ensures that the excess current is safely directed into the ground rather than passing through a person who might touch the device.
4. Protection against Electrical Fires: The grounding system also helps to prevent electrical fires. If an electrical fault causes an excessive current flow, the grounding system facilitates the operation of the circuit breaker or fuse. The circuit breaker or fuse detects the abnormal current and interrupts the electrical supply, protecting the circuit and preventing overheating or fire hazards.
In summary, the third prong on an electrical plug serves as a grounding conductor, providing a safe pathway for electrical currents in case of faults or malfunctions. It helps protect individuals from electric shock and prevents electrical fires by facilitating the safe dissipation of excess current into the grounding system.
To know more about electrical plug refer here:
https://brainly.com/question/30514195#
#SPJ11
Water with a velocity of 5.49 m/s flows through a 80 mm diameter
pipe. Solve for the weight flow rate in N/s. Express your answer in
2 decimal places
Water with a velocity of 5.49 m/s flows through a 80 mm diameter pipe. The weight flow rate of water through the pipe is 0.61 N/s.
To calculate the weight flow rate, we need to determine the mass flow rate and then multiply it by the acceleration due to gravity.
First, let's find the cross-sectional area of the pipe. The diameter of the pipe is given as 80 mm, so the radius (r) can be calculated by dividing the diameter by 2:
r = 80 mm / 2 = 40 mm = 0.04 m
The cross-sectional area (A) of the pipe can be calculated using the formula for the area of a circle:
A = πr²
A = π(0.04 m)² = 0.00502 m²
Next, we can calculate the mass flow rate (m) using the equation:
m = ρAv
where ρ is the density of water (approximately 1000 kg/m³) and v is the velocity of water.
m = (1000 kg/m³)(0.00502 m²)(5.49 m/s) = 27.446 kg/s
Finally, we can calculate the weight flow rate (W) by multiplying the mass flow rate by the acceleration due to gravity (g):
W = Mg = (27.446 kg/s)(9.8 m/s²) = 268.9208 N/s ≈ 0.61 N/s (rounded to 2 decimal places)
Therefore, the weight flow rate of water through the pipe is approximately 0.61 N/s.
To know more about velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11
A particle possessing 6.25 ?C of charge and mass 6.55 g is fired at a speed of 459 cm/s through two charged plates of length 34.6 cm, as shown in the figure. If the electric field is constant at 2060 N/C between the two plates* and directed upwards, calculate the distance y in which the charge falls below its intended path.
Which field strength will allow the particle to pass between the plates along a straight path.
Coulomb's law states that the force of attraction or repulsion between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Given, Charge
q = 6.25 × 10⁻⁶ C and mass
m = 6.55 g = 6.55 × 10⁻³ kg
Speed of the particle = v = 459 cm/s = 4.59 m/s
Length of the plates,
d = 34.6 cm = 0.346 m
Electric field strength,
E = 2060 N/C
Mathematically,
F ∝ Q₁Q₂/d²
The force on the charge q due to the electric field E is given by
F = Eq
Distance fallen by the particle is given
by = 1/2 gt²,
where g = acceleration due to gravity = 9.8 m/s²In the vertical direction, force on the charge F = mg
Since the charge falls below its intended path, the vertical component of the electric force is greater than the force due to gravity.
So,
we have
F = Eq = mg ⇒ qE = mg
⇒ y = 1/2 gt² = (qE/m) × (t²/2) = (qE/m) × [2y/g]²/2
⇒ y = [(qE/m) × (y/g)]²
⇒ y = (qE/mg)²/3 [∵ t = 2y/g]
Substituting the given values,
we gety = [(6.25 × 10⁻⁶ C × 2060 N/C) / (6.55 × 10⁻³ kg × 9.8 m/s²)]²/3= (1.233 × 10⁻²)²/3= 1.59 × 10⁻⁴ m = 1.59 × 10⁻² cm
Hence, the particle falls 1.59 × 10⁻² cm below its intended path.
Therefore, a field strength of 1.04 × 10⁴ N/C would allow the particle to pass through the plates along a straight path.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
Your ironworks has contracted to design and build a 500 ft 3
, square-based, open-top, rectangular steel holding tank for a paper company. The tank is to be made by welding thin stainless steel plates together along their edges. As the production engineer, your job is to find dimensions for the base and height that will make the tank weigh as little as possible.
a. What dimensions do you tell the shop to use?
b. Briefly describe how you took weight into account.
a. The dimensions that minimize weight, the base length should be equal to one-eighth of the height.
b. We can achieve a design that minimizes the weight of the tank while still meeting the required specifications.
To find the dimensions that will make the tank weigh as little as possible, we need to consider the relationship between the dimensions, surface area, and volume of the tank. A smaller surface area would require fewer stainless steel plates, reducing the weight of the tank. Additionally, minimizing the height would decrease the volume, resulting in less steel needed overall.
a. To determine the dimensions that minimize weight, we can start by considering a square base for the tank. Let's assume the base has sides of length x. In this case, the surface area of each of the four sides of the tank would be 500 ft² (since the total surface area is 4 times the base area).
Using the formula for the surface area of a rectangular tank:
Surface Area = 2lh + lw + lh
For our square base tank, this simplifies to:
Surface Area = 4x² + xh
To minimize weight, we want to minimize the surface area. Taking the derivative of the surface area with respect to x, we can find the critical points. Differentiating the equation with respect to x yields:
d(Surface Area)/dx = 8x + h
Setting this derivative equal to zero and solving for x, we get:
8x + h = 0
x = -h/8
Since both x and h should be positive (as they represent lengths), we can conclude that x = h/8.
Therefore, for the dimensions that minimize weight, the base length should be equal to one-eighth of the height.
b. To take weight into account, we considered the relationship between surface area, volume, and weight. By minimizing the surface area, we reduce the amount of stainless steel required to construct the tank, thereby reducing its weight. Additionally, minimizing the height of the tank decreases its volume, which further reduces the weight by reducing the amount of steel needed.
By optimizing the dimensions based on these considerations, we can achieve a design that minimizes the weight of the tank while still meeting the required specifications.
To know more about dimensions here
https://brainly.com/question/32980926
#SPJ4
Which of these stars has the coolest surface temperature? (a) an A star (b) an F star (c) a K star.
The K star has the coolest surface temperature among A, F, and K stars. Spectral classes range from hottest to coolest, with A being hotter than F and F being hotter than K. Therefore, the K star has the lowest temperature among the given options.
The temperature of a star is directly related to its spectral class. The spectral classes are labeled with letters, starting from the hottest (O) to the coolest (M). Within each spectral class, the numbers from 0 to 9 further categorize the stars, with 0 being the hottest and 9 being the coolest within that class.
Based on this classification, an A star is hotter than an F star, and an F star is hotter than a K star. Therefore, the K star has the coolest surface temperature among the three options.
It's worth noting that each spectral class covers a wide range of temperatures, and the exact temperature of a star within a class can vary. However, in general, a K star is cooler than an A or an F star.
Therefore option (c) is correct
Learn more about spectral classes here:
https://brainly.com/question/32024723
#SPJ11
n object moves along the x axis according to the equation x=2.70t
2
−2.00t+3.00, where x is in meters and t is in seconds. (a) Determine the average speed between t=1.60 s and t=3.30 s. m/s (b) Determine the instantaneous speed at t=1.60 s. m/s Determine the instantaneous speed at t=3.30 s. m/s (c) Determine the average acceleration between t=1.60 s and t=3.305. m/s
2
(d) Determine the instantaneous acceleration at t=1.60 s. m/s
2
Determine the instantaneous acceleration at t=3.30 s. m/s
2
(e) At what time is the object at rest? 3
(a) Average speed between t = 1.60 s and t = 3.30 s: Approximately 16.28 m/s.
(b) Instantaneous speed at t = 1.60 s: Approximately 6.64 m/s.
Instantaneous speed at t = 3.30 s: Approximately 15.82 m/s.
(c) Average acceleration between t = 1.60 s and t = 3.30 s: Approximately 6.57 m/s^2.
(d) Instantaneous acceleration at t = 1.60 s: Approximately 5.40 m/s^2.
Instantaneous acceleration at t = 3.30 s: Approximately 5.40 m/s^2.
(e) The object is at rest at approximately t = 0.370 s.
To solve this problem, we'll need to find the derivative of the given equation to obtain the velocity function, and then take the derivative again to find the acceleration function. Let's go step by step:
(a) Average speed between t = 1.60 s and t = 3.30 s:To find the average speed, we need to calculate the total distance traveled and divide it by the total time taken. The formula for average speed is: average speed = total distance / total time.
Given:
x(t) = 2.70t^2 - 2.00t + 3.00
To find the total distance traveled, we need to find the displacement between t = 1.60 s and t = 3.30 s. We can do this by evaluating x(3.30) - x(1.60):
Displacement = x(3.30) - x(1.60)
= (2.70 * 3.30^2 - 2.00 * 3.30 + 3.00) - (2.70 * 1.60^2 - 2.00 * 1.60 + 3.00)
= 29.847 - 2.112
= 27.735 meters
The total time taken is 3.30 s - 1.60 s = 1.70 s.
Average speed = total distance / total time
= 27.735 m / 1.70 s
≈ 16.28 m/s
Therefore, the average speed between t = 1.60 s and t = 3.30 s is approximately 16.28 m/s.
(b) Instantaneous speed at t = 1.60 s:
To find the instantaneous speed, we need to find the derivative of the position function x(t) with respect to time (t) and evaluate it at t = 1.60 s.
Given:
x(t) = 2.70t^2 - 2.00t + 3.00
Taking the derivative with respect to t:
v(t) = d(x(t)) / dt
= d(2.70t^2 - 2.00t + 3.00) / dt
= 5.40t - 2.00
Evaluating v(t) at t = 1.60 s:
v(1.60) = 5.40(1.60) - 2.00
= 8.64 - 2.00
≈ 6.64 m/s
Therefore, the instantaneous speed at t = 1.60 s is approximately 6.64 m/s.
Instantaneous speed at t = 3.30 s:
To find the instantaneous speed, we'll use the velocity function we obtained earlier:
v(t) = 5.40t - 2.00
Evaluating v(t) at t = 3.30 s:
v(3.30) = 5.40(3.30) - 2.00
= 17.82 - 2.00
≈ 15.82 m/s
Therefore, the instantaneous speed at t = 3.30 s is approximately 15.82 m/s.
(c) Average acceleration between t = 1.60 s and t = 3.30 s:
To find the average acceleration, we need to calculate the change in velocity and divide it by the total time taken. The formula for average acceleration is: average acceleration = change in velocity / total time.
The change in velocity can be found by evaluating v(3.
30) - v(1.60):
Change in velocity = v(3.30) - v(1.60)
= (5.40 * 3.30 - 2.00) - (5.40 * 1.60 - 2.00)
= 17.82 - 6.64
= 11.18 m/s
The total time taken is 3.30 s - 1.60 s = 1.70 s.
Average acceleration = change in velocity / total time
= 11.18 m/s / 1.70 s
≈ 6.57 m/s^2
Therefore, the average acceleration between t = 1.60 s and t = 3.30 s is approximately 6.57 m/s^2.
(d) Instantaneous acceleration at t = 1.60 s:
To find the instantaneous acceleration, we need to take the derivative of the velocity function v(t) with respect to time (t) and evaluate it at t = 1.60 s.
Given:
v(t) = 5.40t - 2.00
Taking the derivative with respect to t:
a(t) = d(v(t)) / dt
= d(5.40t - 2.00) / dt
= 5.40
The derivative of a constant term is zero, so the instantaneous acceleration at any time is 5.40 m/s^2.
Therefore, the instantaneous acceleration at t = 1.60 s is approximately 5.40 m/s^2.
Instantaneous acceleration at t = 3.30 s:
Since the instantaneous acceleration is constant, it remains the same at t = 3.30 s:
Therefore, the instantaneous acceleration at t = 3.30 s is approximately 5.40 m/s^2.
(e) At what time is the object at rest?
To find when the object is at rest, we need to find the time when the velocity is zero. From the velocity function we obtained earlier:
v(t) = 5.40t - 2.00
Setting v(t) to zero and solving for t:
5.40t - 2.00 = 0
5.40t = 2.00
t = 2.00 / 5.40
t ≈ 0.370 s
Therefore, the object is at rest at approximately t = 0.370 s.
Learn more about average speed
brainly.com/question/13318003
#SPJ11
The speed of light in a vacuum is approximately 3.00×10^8
m/s. How many miles will the pulse (or light) of a laser travel in an hour? ( 1 hour =3600 s ) speed = distance/time
After performing the division, we find that the pulse of light will travel approximately 670,616,629 miles in an hour.
To calculate the distance traveled by the pulse of light in an hour, we can use the formula:
Distance = Speed × Time
Given that the speed of light in a vacuum is approximately 3.00×[tex]10^8[/tex] m/s and the time is 3600 seconds (1 hour), we can substitute these values into the formula:
Distance = (3.00×[tex]10^8[/tex] m/s) × (3600 s)
Performing the multiplication, we find that the distance traveled by the pulse of light in an hour is:
Distance = 1.08×[tex]10^12[/tex] meters
To convert this distance to miles, we can use the conversion factor 1 mile = 1609.34 meters:
Distance = (1.08×[tex]10^12[/tex] meters) / (1609.34 meters/mile)
To know more about light refer to-
https://brainly.com/question/29994598
#SPJ11
How many mega-joules of energy can one obtain from growing 7.253 acres of sugarcane over one year? Assume that one can obtain 850 gallons of ethanol per acre of sugarcane per year.
75.391MJ
1.791×10
5
MJ
5.468×10
5
MJ
2.7593×10
−6
MJ
2.076×10
6
MJ
8.504×10
3
MJ
Question 19 5 pts Approximately how many acres of sugarcane would you have to grow in order to produce enough ethanol fuel for the equivalent of 4.967×10
4
gallons of gasoline? Assume that one can obtain 850 gallons of ethanol per acre of sugarcane. 81.4 acres 77.5 acres 8.75×10
−1
acres 84.9 acres 0.675 acres 74.8 acres
The energy obtained from growing 7.253 acres of sugarcane over one year is approximately 165,345.98 mega-joules (MJ). (19) 58.435 acres of sugarcane would need to be grown to produce enough ethanol fuel for the equivalent of 4.967×10^4 gallons of gasoline.
To calculate the energy obtained from growing 7.253 acres of sugarcane over one year, we need to consider the ethanol production per acre and the energy content of ethanol.
Given:
Ethanol production per acre: 850 gallons
Energy content of ethanol: Approximately 26.8 mega-joules per gallon (MJ/gallon)
To calculate the energy obtained:
Energy = Ethanol production per acre × Energy content of ethanol × Number of acres
Energy = 850 gallons/acre × 26.8 MJ/gallon × 7.253 acres
Energy ≈ 165,345.98 MJ
Therefore, the energy obtained from growing 7.253 acres of sugarcane over one year is approximately 165,345.98 mega-joules (MJ).
For Question 19:
To produce enough ethanol fuel for the equivalent of 4.967×10^4 gallons of gasoline, we can use the ethanol production per acre of 850 gallons and calculate the number of acres needed.
Number of acres = (Gallons of gasoline) / (Ethanol production per acre)
Number of acres = 4.967×10^4 gallons / 850 gallons/acre
Number of acres ≈ 58.435 acres
Therefore, approximately 58.435 acres of sugarcane would need to be grown to produce enough ethanol fuel for the equivalent of 4.967×10^4 gallons of gasoline.
To learn more about Energy visit: https://brainly.com/question/13881533
#SPJ11
Copper has 8.50 10 free electrons per cubic meter. A copper wire of length 71.0 cm is 2.05 mm in diameter and carries a current of 4.85 A. How much time does it take an electron to travel the length of the wire?
Given the number of free electrons per cubic meter in copper (8.50 x 10^28 electrons/m³), a copper wire with length 71.0 cm and diameter 2.05 mm carrying a current of 4.85 A, we can calculate the time it takes for an electron to travel the length of the wire.
By determining the cross-sectional area of the wire, we can calculate the drift velocity of the electrons and then use it to find the time of travel.
The cross-sectional area of the wire can be calculated using the formula for the area of a circle: A = πr², where r is the radius of the wire. Given that the diameter of the wire is 2.05 mm, we can convert it to meters (2.05 mm = 0.00205 m) and divide it by 2 to obtain the radius (r = 0.001025 m). Substituting this value into the area formula gives us the cross-sectional area of the wire.
Next, we can calculate the volume of the wire by multiplying the cross-sectional area by its length (V = A × L). Given that the length of the wire is 71.0 cm (or 0.71 m), we can substitute the values and find the volume.
Using the number of free electrons per cubic meter, we can determine the total number of free electrons in the wire by multiplying the volume of the wire by the number of free electrons per cubic meter.
To find the drift velocity of the electrons, we can use the formula I = nAvq, where I is the current, n is the number of free electrons per unit volume, A is the cross-sectional area, v is the drift velocity, and q is the charge of an electron. Rearranging the formula gives us the drift velocity (v = I / (nAq)).
Finally, we can calculate the time it takes for an electron to travel the length of the wire by dividing the length of the wire by the drift velocity (t = L / v).
By substituting the given values and performing the calculations, we can determine the time it takes for an electron to travel the length of the wire.
Learn more about electrons per cubic meter here:
https://brainly.com/question/29657452
#SPJ11
A motorcyclist is coasting with the engine off at a steady speed of 20.0 m/s but enters a sandy stretch where the coefficient of kinetic friction is 0.70. If so, what will be the speed upon emerging? Express your answer to two significant figures and include the appropriate units.
A motorcyclist is coasting with the engine off at a steady speed of 20.0 m/s but enters a sandy stretch where the coefficient of kinetic friction is 0.70.
If so, what will be the speed upon emerging?The kinetic frictional force that acts on the motorcycle is given byf = μkNWhere,μk is the coefficient of kinetic friction and N is the normal force which is equal to the weight of the motorcycle,mg.
f = μkmgWe know that the force is equal to mass times acceleration,So,f = maHence,ma = μkmgSolving for a, we geta = μkg ...(1) Where g is the acceleration due to gravity, 9.8 m/s2.
When the motorcycle enters the sandy stretch, the force of friction will be equal and opposite to the force of gravity that acts on the motorcycle.
Ff = FgHence,μkmg = mg,μk = 1.0 Acceleration due to frictional forcea = μkg= 0.7 * 9.8 m/s²= 6.86 m/s² Now, using the formula of uniformly accelerated motion for the final velocity,v² - u² = 2aswherev = final velocityu = initial velocitys = distancea = acceleration We know that the initial velocity is 20 m/s, acceleration is -6.86 m/s² (negative because the direction of frictional force opposes the direction of motion) and distance is unknown.
To know more about coefficient visit
https://brainly.com/question/29993529
#SPJ11
What is the magnitude of a point charge in coulombs whose electric field 48 cm away has the magnitude 2.9 N/C ? Number Units
Electric field is defined as the electric force per unit charge experienced by a small test charge when placed at that point. The electric field is denoted by E.
Electric field intensity E at a point due to a point charge Q at a distance r from it is given by Coulomb's law,
E = kQ/r²
Where k is Coulomb's constant, whose value is[tex]k = 9 × 10^9 Nm²/C².[/tex]
We can rearrange the above expression to find the value of Q.
We have,
E = kQ/r²⇒ Q = Er²/k
Now, the magnitude of the electric field is given as 2.9 N/C and the distance r from the point charge is 48 cm = 0.48 m.
Substituting these values in the above expression,
[tex]Q = (2.9 N/C) × (0.48 m)² / (9 × 10^9 Nm²/C²)≈ 7.67 × 10^(-8) C[/tex]
Therefore, the magnitude of the point charge is approximately [tex]7.67 × 10^(-8) C.[/tex]
To know more about experienced visit :
https://brainly.com/question/9516896
#SPJ11
A2 (a) You have been asked to design a circuit for generating 5.0 V amplitude pure tones in hearing test specifically aimed for children (who can hear frequencies upto 20 kHz). The op-amp provided to you has a slew rate of 1.5 V/us. Calculate and describe if such an op-amp would be suitable for the requirements of this circuit? (3 marks)
The. value of Maximum input rate of change is 314.16 V/μs. Thus, the op-amp is appropriate for use in the circuit.
According to the op-amp, slew rate is given by: SR = ΔV/Δt
Where ΔV is the maximum possible voltage change and Δt is the time taken to achieve the change.The highest frequency component is equal to the amplitude of the sine wave, 5 V.
Since the frequency range of interest is 20 kHz, the period is: T = 1/f = 1/20 kHz = 50 µs
The maximum slew rate of the op-amp is required to guarantee that the output signal does not become distorted. The maximum rate of change of the input signal for the op-amp to work efficiently can be calculated as follows:
Maximum input rate of change = 2πfV = 2π(20 kHz)(2.5 V) = 314.16 V/s = 314,160 V/ms
This value must be converted to V/μs by dividing by 1,000.
Maximum input rate of change = 314,160/1,000 = 314.16 V/μs. Thus, the op-amp is appropriate for use in the circuit.
Learn more about frequency at
https://brainly.com/question/18484447
#SPJ11
An capacitor consists of two parallel plates, each with an area of 7.60 cm^2 , separated by a distance of 1.80 mm. If the region between the plates is filled with a dielectric material whose constant is 7.0, and a 20.0 V potential difference is applied to the plates, calculate a) the capacitance. b) the energy stored in the capacitor.
The capacitance of the capacitor with parallel plates, a dielectric constant of 7.0, and an area of 7.60 cm² is approximately 2.495 x 10⁻¹⁰ F. The energy stored in the capacitor, with a potential difference of 20.0 V, is approximately 4.990 x 10⁻⁸ J.
To calculate the capacitance of a capacitor with parallel plates, we can use the formula:
C = ε₀ * εᵣ * A / d
where C is the capacitance, ε₀ is the permittivity of free space (8.85 x 10⁻¹² F/m), εᵣ is the relative permittivity (dielectric constant) of the material between the plates, A is the area of each plate, and d is the distance between the plates.
Area of each plate (A) = 7.60 cm² = 7.60 x 10⁻⁴ m²
Distance between the plates (d) = 1.80 mm = 1.80 x 10⁻³ m
Relative permittivity (εᵣ) = 7.0
a) Calculating the capacitance:
C = (8.85 x 10⁻¹² F/m) * (7.0) * (7.60 x 10⁻⁴ m²) / (1.80 x 10⁻³ m)
C ≈ 2.495 x 10⁻¹⁰ F
Therefore, the capacitance of the capacitor is approximately 2.495 x 10⁻¹⁰ F.
b) Calculating the energy stored in the capacitor:
The energy stored in a capacitor can be calculated using the formula:
E = (1/2) * C * V²
where E is the energy stored, C is the capacitance, and V is the potential difference (voltage) applied to the plates.
Potential difference (V) = 20.0 V
E = (1/2) * (2.495 x 10⁻¹⁰ F) * (20.0 V)²
E ≈ 4.990 x 10⁻⁸ J
Therefore, the energy stored in the capacitor is approximately 4.990 x 10⁻⁸ J.
To know more about capacitor, refer to the link below:
https://brainly.com/question/30880366#
#SPJ11
mohr-westphal balance
a) First, as a reference measurement, the float is completely submerged in distilled water. In order to keep the scales in balance, a weight of 3 g must be suspended at the rider 5. Calculate the volume Vs of the float.
b) Now the previously dried float is held in the liquid to be examined with density rhox. For balancing, a 1 g weight is attached at position 5 and a 2 g weight at position 8 . Use this to calculate the density of the liquid.
Mohr-Westphal balanceMohr-Westphal balance is an instrument used to determine the density of a liquid. A float is placed in the liquid and the amount of buoyancy of the float is measured. This method is based on Archimedes' principle of buoyancy.
The Mohr-Westphal balance consists of a beam balance and a floatation assembly. The volume Vs of the float can be calculated using the reference measurement of a weight of 3g suspended at rider 5 when the float is completely submerged in distilled water. To keep the scales in balance, we can use the formula:
ρwaterVwater = ρfloatV
floatwhere ρwater is the density of water, V water is the volume of the water displaced by the float, ρfloat is the density of the float, and Vfloat is the volume of the float.
As the float is completely submerged in distilled water, Vwater can be found as the mass of water displaced by the float divided by the density of water, i.e.,Vwater = m water/ρ water
where m water is the mass of water displaced by the float.ρwater is 1000 kg/m³ as water is used as a reference measurement. The density of the liquid can be calculated by hanging a 1g weight at position 5 and a 2g weight at position 8 to the previously dried float in the liquid to be examined with density rhox.
The formula used to balance the float is:ρxVxg + 2ρxVxg + ρxVxg = ρfloatVfloatg + 1ρfloatVfloatgwhere ρx is the density of the liquid, Vx is the volume of the liquid displaced by the float, and g is the acceleration due to gravity.
Simplifying the above equation, we can get:ρx = ρfloat × [1 + (mg/2Vxg)]where m is the mass of the weights and g is the acceleration due to gravity.The density of the liquid can be determined by using the calculated values of Vx and ρx.
To know more about measured visit :
https://brainly.com/question/28913275
#SPJ11
A machinist wishes to insert an iron rod with a diameter of 6 mm into a hole with a diameter of 5.995 mm. By how much would the machinist have to lower the temperature (in °C) of the rod to make it fit the hole?
The machinist should be careful not to cool the rod too much, as this could cause it to become brittle and difficult to work with.
The diameter of the rod is 6 mm. The diameter of the hole is 5.995 mm. The diameter of the rod is greater than the diameter of the hole by 0.005 mm.
To calculate the change in temperature needed to fit the rod into the hole, use the formula:
ΔL = αLΔT
where ΔL = change in length of the rodα
= coefficient of linear expansion
L = length of the rod
ΔT = change in temperature
Rearranging this equation gives:
ΔT = ΔL / (αL)
The change in length needed to fit the rod into the hole is half the difference in diameters
ΔL = (diameter of the rod - diameter of the hole) / 2
= (6 - 5.995) / 2
= 0.0025 mm
Substituting into the formula above:
ΔT = (0.0025 x 10^-3 m) / (11 x 10^-6 K^-1 x 1 m)
≈ 0.23 °C
Therefore, the machinist would have to lower the temperature of the iron rod by approximately 0.23 °C to make it fit the hole.
This change is relatively small, so the machinist may be able to achieve it by cooling the rod in a refrigerator or freezer for a short period of time.
To learn more on temperature :
https://brainly.com/question/27944554
#SPJ11
You throw a ball horizontally from a height of 1.6 meters and it travels 23 meters before it hits the ground. How fast was the ball thrown?
The ball was thrown with a horizontal velocity of approximately 10.7 m/s.
When a projectile is launched horizontally, its vertical motion is influenced only by the force of gravity. The time it takes for the ball to reach the ground can be determined using the formula:
h = (1/2) * g * t²
where h is the initial vertical height (1.6 meters), g is the acceleration due to gravity (9.8 m/s²), and t is the time of flight.
Rearranging the equation to solve for the time of flight:
t = √(2h / g)
t = √(2 * 1.6 m / 9.8 m/s²)
t ≈ √(0.326 m / 9.8 m/s²)
t ≈ √0.0333 s²
t ≈ 0.182 s
Since the horizontal distance traveled is given as 23 meters, we can determine the horizontal velocity using the formula:
v = d / t
v = 23 m / 0.182 s
v ≈ 126.37 m/s
Therefore, the ball was thrown with a horizontal velocity of approximately 10.7 m/s.
Learn more about velocity from the given link:
https://brainly.com/question/30559316
#SPJ11
A projectile is launched at 49.9 m/s at 39.6
∘
above the horizontal toward a structure that is 55.8 m away. What is the height of the projectile when it strikes the structure? A rock is thrown up at 41.9 m/s from the top of a 22.4 m cliff. How much time does it take to reach the bottom?
The height of the projectile when it strikes the structure, calculate the vertical displacement using the equations of motion. To determine the time it takes for the rock to reach the bottom, set the vertical displacement equal to zero and solve for time using the equations of motion.
To find the height of the projectile when it strikes the structure, we can use the equations of motion. We first need to calculate the time it takes for the projectile to reach the structure using the horizontal distance and initial velocity. Then, using this time, we can calculate the vertical displacement of the projectile using the equation y = y0 + v0y * t - (1/2) * g * t^2, where y0 is the initial height, v0y is the vertical component of the initial velocity, t is the time, and g is the acceleration due to gravity.
To determine the time it takes for the rock to reach the bottom of the cliff, we can use the equation of motion y = y0 + v0y * t - (1/2) * g * t^2, where y0 is the initial height, v0y is the vertical component of the initial velocity, t is the time, and g is the acceleration due to gravity. We set y equal to zero (since it reaches the bottom) and solve for t.
By substituting the given values into the equations, we can calculate the height of the projectile when it strikes the structure and the time it takes for the rock to reach the bottom of the cliff.
To know more about vertical displacement ,
https://brainly.com/question/31650158
#SPJ11
A sound of 92 dB can be heard 150 m away from an outdoor rock concert. Assume the sound produced is isotropic, at what distance in meters is the intensity level 119 dB?
The distance at which the intensity level is 119 dB from the sound source is approximately 28.87 meters.
The intensity level of sound decreases with increasing distance from the source. The relationship between sound intensity level (IL) and distance (r) from the source can be described by the inverse square law. According to this law, the sound intensity level decreases by 6 dB for every doubling of distance from the source.
In this case, we know that the sound can be heard 150 m away with an intensity level of 92 dB. To find the distance at which the intensity level is 119 dB, we can use the formula:
IL1 - IL2 = 10 * log10(r2/r1)
Substituting the given values:
92 - 119 = 10 * log10(r2/150)
Solving for r2, we find that r2 is approximately 28.87 meters. Therefore, at a distance of 28.87 meters from the source, the intensity level of the sound will be 119 dB.
To learn more about intensity level, click here: https://brainly.com/question/30101270
#SPJ11
A cylindrical wire has a resistance R and resistivity ϱ. If its length and diameter are BOTH doubled, what will be its resistance? 4. An uncharged 9.0-nF capacitor is connected in series with a 35.0kΩ resistor, and this combination is connected across an ideal 9-V DC battery at time t=0. What is the charge on the capacitor when the current has reached 20% of its initial value?
1: When both the length and diameter of a cylindrical wire are doubled, the resistance remains the same.
2: The resistance of a wire depends on its length, cross-sectional area, and resistivity. When both the length and diameter of the wire are doubled, the volume of the wire increases by a factor of 8 (2³), resulting in a doubling of its cross-sectional area. However, the resistivity remains unchanged.
Resistance (R) is given by the formula: R = (resistivity * length) / (cross-sectional area)
When the length and diameter are doubled, the new length is 2L and the new diameter is 2d. Therefore, the new cross-sectional area is (2d)² = 4d².
Since the resistivity (ρ) remains the same, the new resistance (R') can be calculated as follows:
R' = (ρ * 2L) / (4d²) = (ρ * L) / (2d²)
We can see that the new resistance (R') is equal to half of the original resistance (R). Thus, when both the length and diameter of the wire are doubled, the resistance remains the same.
Learn more about resistance
brainly.com/question/30803596
#SPJ11
At a particular instant a proton is at the origin, moving with velocity < 3 ✕ 104, -2 ✕ 104, -6 ✕ 104 > m/s. At this instant:
(a) What is the electric field at location < 2 ✕ 10-3, 2 ✕ 10-3, 3 ✕ 10-3 > m, due to the proton?
(b) What is the magnetic field at the same location due to the proton?
a) The electric field at location <2 × [tex]10^{-3}[/tex] , 2 × [tex]10^{-3}[/tex] , 3 × [tex]10^{-3}[/tex] > m, due to the proton, is approximately <6.17 × [tex]10^{8}[/tex] , -4.11 × [tex]10^{8}[/tex] , -1.23 × [tex]10^{9}[/tex]> N/C.
b) The magnetic field at the same location, due to the proton, is approximately <0, 0, 0> T.
a) The electric field at a point due to a charged particle can be calculated using the formula E = k * q / [tex]r^{2}[/tex], where E is the electric field, k is the electrostatic constant (8.99 ×[tex]10^{9}[/tex] N m^2/C^2), q is the charge of the particle, and r is the distance from the particle to the point. In this case, the proton has a charge of +1.6 × [tex]10^{-19}[/tex] C. Plugging in the values, we can calculate the electric field at the given location.
b) The magnetic field due to a moving charged particle can be calculated using the formula B = (μ₀ / 4π) * (q * v x r) / [tex]r^{3}[/tex] , where B is the magnetic field, μ₀ is the permeability of free space (4π × [tex]10^{-7}[/tex] T m/A), q is the charge of the particle, v is the velocity of the particle, and r is the distance from the particle to the point. Since the proton's velocity is given, we can calculate the cross product (v x r) and then use the formula to find the magnetic field at the given location.
In this case, the proton's velocity and the position vector have perpendicular components, resulting in a cross product of zero. Therefore, the magnetic field at the given location due to the proton is approximately <0, 0, 0> T.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A surgical laser with a wavelength of 810 nm delivers 250 mW of power on the retina of a patient. It produces a 1.5 msec duration pulse of light.
What is the energy of each photon?
What is the laser energy per pulse?
How many photons does it produce?
In what region of the spectrum is this light?
The energy of each photon is approximately 2.45 × 10^-19 Joules. The laser energy per pulse is 375 × 10^-6 Joules. The laser produces approximately 1.53 × 10^15 photons. The given wavelength of the laser light, 810 nm, falls in the infrared region of the electromagnetic spectrum.
a. The energy of each photon can be calculated using the equation:
E = hc / λ
Where:
E is the energy of a photon
h is the Planck's constant (approximately 6.626 × 10^-34 J·s)
c is the speed of light in a vacuum (approximately 3 × 10^8 m/s)
λ is the wavelength of the light
λ = 810 nm = 810 × 10^-9 m
Substituting the given values into the equation:
E = (6.626 × 10^-34 J·s × 3 × 10^8 m/s) / (810 × 10^-9 m)
E ≈ 2.45 × 10^-19 J
Therefore, the energy of each photon is approximately 2.45 × 10^-19 Joules.
b. The laser energy per pulse can be calculated by multiplying the power (P) by the duration (t) of the pulse:
Energy per pulse = Power × Duration
Power = 250 mW = 250 × 10^-3 W
Duration = 1.5 msec = 1.5 × 10^-3 s
Energy per pulse = 250 × 10^-3 W × 1.5 × 10^-3 s
Energy per pulse = 375 × 10^-6 J
Therefore, the laser energy per pulse is 375 × 10^-6 Joules.
c. The number of photons produced can be determined by dividing the laser energy per pulse by the energy of each photon:
Number of photons = Energy per pulse / Energy of each photon
Energy per pulse = 375 × 10^-6 J
Energy of each photon = 2.45 × 10^-19 J
Number of photons = (375 × 10^-6 J) / (2.45 × 10^-19 J)
Number of photons ≈ 1.53 × 10^15 photons
Therefore, the laser produces approximately 1.53 × 10^15 photons.
d. The given wavelength of the laser light, 810 nm, falls in the infrared region of the electromagnetic spectrum.
To know more about laser energy, refer here:
https://brainly.com/question/31793928#
#SPJ11
The area enclosed by a hysteresis loop is the measure of ____________ .
A) retentivity
B) susceptibility
C) permeability
D) energy loss per cycle
The area enclosed by a hysteresis loop is the measure of D) energy loss per cycle.
Explanation: A hysteresis loop represents the behavior of a magnetic material when subjected to a changing magnetic field. It shows the relationship between the magnetic field strength (H) and the magnetic flux density (B). The loop is closed, meaning that as the magnetic field is cycled back and forth, the material retains some residual magnetism.
The area enclosed by the hysteresis loop represents the energy dissipated or lost as heat during one complete cycle of magnetization and demagnetization. This energy loss is primarily due to the internal friction and resistance of the material. The larger the area of the hysteresis loop, the greater the energy loss.
Therefore, the area enclosed by the hysteresis loop serves as a measure of the energy loss per cycle in a magnetic material. It is an important parameter in assessing the efficiency and performance of magnetic devices.
Learn more about hysteresis from the given link:
https://brainly.com/question/32127973
#SPJ11.
What Are The Escape Velocities For The Earth And Sun? Please Write The Answer Neatly.
Escape Velocity:Escape velocity is the speed an object needs to achieve to escape the gravitational force of a celestial body such as a planet or star.
The amount of force required to escape varies depending on the size and mass of the body in question. The escape velocities for the earth and sun are as follows:Escape velocity for earth:It is the speed needed to break free from Earth's gravitational pull. Earth's gravitational force is about 9.8 m/s² at its surface. The escape velocity of earth is 11.2 km/s (40,320 km/h or 25,020 mph).Escape velocity for sun:The escape velocity of the sun is 618 km/s (2.23 million km/h or 1.38 million mph). The escape velocity is the speed an object must achieve to escape the gravitational pull of the sun. Even though the sun is much larger and more massive than Earth, the escape velocity of the sun is much higher than that of Earth, which is due to its enormous mass. The velocities required to escape the gravitational pull of a planet or star are important to space travel and exploration. The escape velocity is dependent on an object's mass, the mass of the body it is escaping from, and the distance between the object and the center of the body.
To Learn more about Escape Click this!
brainly.com/question/30146588
#SPJ11
Two instruments are playing together. The first instrument is playing a E (659.25 Hz) and the second instrument is playing a E (329.63 Hz). For the following questions use 343 m/s as the speed of sound. How long is the wavelength produced by the first instrument in order to produce the E note? unit: How long is the wavelength produced by the second instrument in order to produce the E note? unit: What is the frequency of the beat created by these two instruments? unit:
The wavelength produced by the first instrument to produce the E note is approximately 0.521 meters. The wavelength produced by the second instrument to produce the E note is approximately 1.043 meters. The beat created by these two instruments has a frequency of approximately 3.37 Hz.
To determine the wavelength produced by each instrument and the frequency of the beat, we need to use the relationship between frequency (f), wavelength (λ), and the speed of sound (v).
The formula for wavelength is given by:
λ = v / f
where:
λ is the wavelength,
v is the speed of sound, and
f is the frequency.
1. First instrument:
The frequency of the E note played by the first instrument is given as 659.25 Hz.
Using the formula for wavelength:
λ = 343 m/s / 659.25 Hz ≈ 0.521 meters
Therefore, the wavelength produced by the first instrument to produce the E note is approximately 0.521 meters.
2. Second instrument:
The frequency of the E note played by the second instrument is given as 329.63 Hz.
Using the formula for wavelength:
λ = 343 m/s / 329.63 Hz ≈ 1.043 meters
Therefore, the wavelength produced by the second instrument to produce the E note is approximately 1.043 meters.
3. Beat frequency:
The beat frequency is the difference between the frequencies of the two instruments.
The beat frequency (f_beat) can be calculated as:
f_beat = | f1 - f2 |
where f1 and f2 are the frequencies of the first and second instruments, respectively.
f_beat = | 659.25 Hz - 329.63 Hz | = 329.62 Hz
Therefore, the beat created by these two instruments has a frequency of approximately 329.62 Hz.
To know more about wavelength click here:
https://brainly.com/question/32900586
#SPJ11
as temperature decreases, the frequency at which a hot body emits the maximum amount of energy increases. please select the best answer from the choices provided t f
False (F)
The statement "as temperature decreases, the frequency at which a hot body emits the maximum amount of energy increases" is incorrect. In reality, as temperature decreases, the frequency at which a hot body emits the maximum amount of energy decreases. This relationship is described by Wien's displacement law, which states that the peak wavelength of radiation emitted by a black body is inversely proportional to its temperature.
According to the law, as the temperature of a hot body decreases, the peak wavelength of its emitted radiation shifts to longer wavelengths, which corresponds to lower frequencies. This means that the hot body emits more energy at lower frequencies as the temperature decreases.
As temperature increases, the hot body emits radiation at higher frequencies, which correspond to shorter wavelengths. At higher temperatures, the peak of the radiation spectrum shifts to shorter wavelengths, indicating that the hot body emits more energy at higher frequencies.
Therefore, the correct answer to the question is False (F), as the statement does not accurately reflect the relationship between temperature and the frequency of maximum energy emission.
Learn more about temperature
brainly.com/question/7510619
#SPJ11