Q4. When a light with certain intensity is incident on a surface, the ejected electrons have a maximum kinetic energy of 2 eV. If the intensity of light is decreased to half, calculate the maximum kinetic energy of the electrons. a

When an object is submerged in water, the apparent weight is less than its actual weight due to the buoyant force. To determine the apparent weight of 125 cm³ of steel submerged in water, we will need to use the formula for buoyant force.

Buoyant force = Weight of water displaced by the object

We know the volume of the steel is 125 cm³. Since 1 cm³ of water has a mass of 1 gram and the density of steel is 7.8 g/cm³, we can calculate the mass of the steel:

mass of steel = volume of steel × density of steel= 125 cm³ × 7.8 g/cm³= 975 g

To determine the weight of water displaced by the steel, we need to know the volume of water displaced.

This is equal to the volume of the steel:

volume of water displaced = volume of steel = 125 cm³

The weight of water displaced is equal to the weight of this volume of water, which we can calculate using the density of water and the volume of water displaced:

weight of water displaced = volume of water displaced × density of water= 125 cm³ × 1 g/cm³= 125 g

Now we can calculate the buoyant force acting on the steel:

Buoyant force = Weight of water displaced by the object= 125 g × 9.81 m/s²= 1.23 N

The apparent weight of the steel submerged in water is equal to the actual weight minus the buoyant force:

Apparent weight = Actual weight - Buoyant force

Actual weight = mass of steel × gravitational acceleration= 975 g × 9.81 m/s²= 9.57 N

Apparent weight = 9.57 N - 1.23 N = 8.34 N

Therefore, the apparent weight of 125 cm³ of steel submerged in water is 8.34 N (to two decimal places).

To know more about buoyant force visit:

https://brainly.com/question/20165763

#SPJ11

False. The different colors of the aurora are not caused by diffraction of light as it passes through the ionosphere.

The colors of the aurora are primarily caused by the interaction between charged particles from the Sun and the Earth's magnetic field. When high-energy particles from the Sun, such as electrons and protons, enter the Earth's atmosphere, they collide with atoms and molecules. These collisions excite the atoms and molecules, causing them to emit light at specific wavelengths.

The specific colors observed in the aurora are determined by the type of gas particles involved in the collisions and the altitude at which the collisions occur. For example, oxygen molecules typically produce green and red colors, while nitrogen molecules produce blue and purple colors. The altitude at which the collisions occur also affects the color distribution.

Diffraction, on the other hand, refers to the bending or spreading of light waves as they encounter an obstacle or pass through an aperture. While diffraction can occur in various situations, it is not the primary mechanism responsible for the colors observed in the aurora.

Learn more about aurora from the given link:

https://brainly.com/question/2220596

#SPJ11.

The force exerted by the car is approximately 28,404,000 Newtons. This force is responsible for the acceleration of the car during the 5-second time interval and the distance traveled.

To determine the force exerted by the car, we can use Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration:

Force = mass * acceleration

Given that the car has a mass of 789 kg, we need to find the acceleration it undergoes. To calculate the acceleration, we can use the equation of motion:

distance = (1/2) * acceleration * time^2

In this case, the distance is 450 km, which is 450,000 meters, and the time is 5 seconds. Rearranging the equation, we can solve for acceleration:

acceleration = (2 * distance) / (time^2)

Substituting the given values:

acceleration = (2 * 450,000 m) / (5 s)^2

            = 36,000 m/s^2

Now that we have the acceleration, we can calculate the force exerted by the car:

Force = mass * acceleration

     = 789 kg * 36,000 m/s^2

     = 28,404,000 N

Therefore, the force exerted by the car is approximately 28,404,000 Newtons. This force is responsible for the acceleration of the car during the 5-second time interval and the distance traveled.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ11

Solid core PVC pipe is a solid material without internal cavities. It is extruded and preferred for applications requiring high stiffness and pressure capacity. The solid construction provides durability, but it can be less flexible and susceptible to impact damage.

On the other hand, cell core PVC pipe has internal cells, making it hollow. This design offers a smoother interior surface and improved flexibility. The internal cells reduce material usage, resulting in a lightweight pipe that is easier to install and maintain. Cell core PVC pipes are commonly used in non-pressure applications like drainage systems and ventilation ducts.

Each type of PVC pipe has its own advantages and disadvantages. Solid core PVC pipes provide strength and pressure capabilities but lack flexibility. Cell core PVC pipes offer flexibility and ease of installation but may have limitations regarding pressure applications.

Choosing the appropriate type of PVC pipe depends on the specific requirements of the project, considering factors such as pressure demands, desired flexibility, and intended application. Proper selection ensures optimal performance and longevity of the piping system.

To Learn more about PVC Click this!

brainly.com/question/20589950

#SPJ11

John always paddles his canoe at a constant speed v with respect to the still water of a river. One day, the river current was due west and was moving at a constant speed that was a little less than v with respect to that of still water.

John decided to see whether making a round trip across the river and back, a north-south trip (in which he paddles in the north/south direction, but doesn't actually travel in either the north or south direction, respectively), would be faster than making a round trip an equal distance east-west. We have to find out the result of John's test.The time for the north-south trip was equal to the time for the east-west trip is the result of John's test.What we can infer from the given problem is that John paddles his canoe at a constant speed v with respect to the still water of a river.

To know more about respect visit:

https://brainly.com/question/19711470

#SPJ11

The speed of the satellite is approximately 7764 m/s, and the period of the satellite (time to complete one orbit) is approximately 86.3 minutes.

To determine the speed of the satellite, we can use the concept of centripetal acceleration. The centripetal acceleration is provided by the gravitational force between the satellite and the Earth. The formula for centripetal acceleration is:

a = v^2 / r,

where "a" is the centripetal acceleration, "v" is the velocity of the satellite, and "r" is the distance between the center of the Earth and the satellite's orbit (the radius of the Earth plus the altitude of the satellite).

Given that the free fall acceleration is 8.29 m/s^2 and the radius of the Earth is 6400 km, we can convert these values to meters and solve for the velocity:

8.29 m/s^2 = v^2 / (6400 km + 500 km),

where the altitude of the satellite above the Earth's surface is 500 km.

Simplifying the equation, we have:

v^2 = 8.29 m/s^2 * (6400 km + 500 km),

v^2 = 8.29 m/s^2 * (6900 km).

Now we can solve for the velocity:

v = √(8.29 m/s^2 * (6900 km)).

Calculating this expression, we find that the speed of the satellite is approximately 7764 m/s.

To determine the period of the satellite (the time interval required to complete one orbit), we can use the formula for the period of a circular orbit:

T = 2πr / v,

where "T" is the period, "r" is the distance between the center of the Earth and the satellite's orbit, and "v" is the velocity of the satellite.

Plugging in the values, we have:

T = 2π * (6400 km + 500 km) / 7764 m/s.

Simplifying and converting kilometers to meters, we find that the period of the satellite is approximately 5180 seconds or 86.3 minutes.

In summary, the speed of the satellite is approximately 7764 m/s, and the period of the satellite (time to complete one orbit) is approximately 86.3 minutes.

Learn more about gravitational force here:

https://brainly.com/question/29190673

#SPJ11

Given, mass of cord, m = 0.39 kg Distance between the two supports.

d = 8.9 m Time taken to reach other end, t = 0.88 s We know that the speed of wave on the cord,

v = d/t = 8.9/0.88 = 10.11 m/sUsing the formula for tension,

[tex]T = (m*v^2)/dWe get, T = (0.39 * 10.11^2)/8.9 = 4.45 N, the tension in the cord is 4.45 N.[/tex]

To know more about supports visit:

https://brainly.com/question/27942517

#SPJ11

Windchill represents the combined effect of ambient temperature and wind speed.

Windchill is a measure of how cold it feels outside due to the combined effect of ambient temperature and wind speed. It takes into account the fact that wind increases the rate of heat loss from exposed skin, making the air temperature feel colder than it actually is.

When wind blows over our skin, it carries away the heat that our bodies produce, leading to a more rapid cooling effect. As a result, even if the actual air temperature is above freezing, the wind can make it feel much colder.

Meteorologists use a wind chill index or formula to calculate the perceived temperature based on the actual air temperature and wind speed. The wind chill index provides an estimation of how cold it feels to the human body and helps people understand the potential impact on their comfort and safety when exposed to cold and windy conditions.

It's worth noting that different regions and countries may use different formulas or indices to calculate wind chill, but the underlying concept remains the same: windchill combines the effects of temperature and wind speed to assess the perceived coldness.

To know more about Windchill here

https://brainly.com/question/32216567

#SPJ4

For an object rotating about an external axis with a constant tangential velocity and moving further away from the axis at a constant rate, we can derive the following equations of motion:

1. Position (r): r = r₀ + vt,where r₀ is the initial distance from the axis, v is the tangential velocity, and t is time.

2. Velocity (v): v = v₀ + at,where v₀ is the initial tangential velocity, a is the tangential acceleration (which is zero in this case), and t is time.

3. Acceleration (a): a = 0,since the tangential acceleration is zero for constant tangential velocity.

4. Angular Displacement (θ): θ = θ₀ + ω₀t,where θ₀ is the initial angular displacement, ω₀ is the initial angular velocity, and t is time.

5. Angular Velocity (ω): ω = ω₀,since the angular velocity remains constant.

6. Angular Acceleration (α): α = 0,since the angular acceleration is zero for constant angular velocity.

These equations describe the motion of the object in terms of its position, velocity, and acceleration, as well as the angular displacement, angular velocity, and angular acceleration.

To learn more about rotational motion visit brainly.com/question/33356353

#SPJ11.

The rate at which energy is emitted from an accelerating charged particle is given by the formula dE/dt = (2/3) (e^2/4πε₀c³) a², where e is the charge of the particle and a is its acceleration. The expression (2/3) (e^2/4πε₀c³) represents a constant factor. The energy emitted per second is directly proportional to the square of the acceleration of the charged particle.

The rate at which energy is emitted from an accelerating charged particle can be derived from the theory of classical electrodynamics. The formula dE/dt = (2/3) (e^2/4πε₀c³) a² represents the power radiated by the charged particle. Here, e is the charge of the particle, a is its acceleration, ε₀ is the permittivity of free space, and c is the speed of light.

The expression (2/3) (e^2/4πε₀c³) represents a constant factor that depends on the properties of the particle and the medium in which it is accelerating. The energy emitted per second, or the power, is directly proportional to the square of the acceleration of the charged particle.

Therefore, the rate at which energy is emitted from an accelerating charged particle is determined by the square of its acceleration, and the constant factor (2/3) (e^2/4πε₀c³) represents the proportionality between the power and the acceleration.

To know more about acceleration click here:

https://brainly.com/question/2303856

#SPJ11

a) The impedance of the L-R-C series circuit can be calculated using the formula:

�

=

�

2

+

(

�

�

−

�

�

)

2

Z=

R

2

+(X

L

​

−X

C

​

)

2

​

Where:

�

Z is the impedance of the circuit.

�

R is the resistance of the resistor.

�

�

X

L

​

 is the reactance of the inductor.

�

�

X

C

​

 is the reactance of the capacitor.

In this case,

�

=

200

R=200 Ω,

�

�

=

�

�

=

(

240

rad/s

)

(

0.400

H

)

X

L

​

=ωL=(240rad/s)(0.400H), and

�

�

=

1

�

�

=

1

(

240

rad/s

)

(

6.00

×

1

0

−

6

F

)

X

C

​

=

ωC

1

​

=

(240rad/s)(6.00×10

−6

F)

1

​

. By substituting these values into the formula, you can calculate the impedance of the circuit.

b) The current amplitude can be calculated using Ohm's Law, which states that

�

=

�

�

I=

Z

V

​

, where

�

I is the current amplitude,

�

V is the voltage amplitude of the source, and

�

Z is the impedance of the circuit.

c) The phase angle of the source voltage with respect to the current can be calculated using the formula:

�

=

arctan

⁡

(

�

�

−

�

�

�

)

θ=arctan(

R

X

L

​ −X

C

)

d) If the phase angle (

�

θ) is positive, it means that the source voltage leads the current. If

�

θ is negative, it means that the source voltage lags the current.

e) The voltage amplitude across the resistor (

�

�

V

R

​ ) can be calculated using Ohm's Law:

�

�

=

�

⋅

�

V

R

​ =I⋅R.

f) The voltage amplitude across the inductor (

�

�

V

L

​ ) can be calculated using the formula:

�

�

=

�

⋅

�

�

V

L

​

=I⋅X

L

​ .

g) The voltage amplitude across the capacitor (

�

�

V

C

​ ) can be calculated using the formula:

�

�

=

�

⋅

�

�

V

C

​ =I⋅X

C

​h) The voltage amplitude across the capacitor can be greater than the voltage amplitude across the source in a series L-R-C circuit because the capacitor's reactance (

�

�

X

C

​ ) can be larger than the reactance of the inductor (

�

�

X

L

​ ). This can result in a higher voltage drop across the capacitor compared to the source voltage. Additionally, the impedance of the circuit depends on the individual values of the resistor, inductor, and capacitor, which can contribute to different voltage amplitudes across the components.

To learn more about L-R-C series circuit, Click here:

https://brainly.com/question/32250409

#SPJ11

a) The friction factor increases with relative roughness at any given Reynolds number for turbulent flow because there is more resistance caused by the increased roughness. The rougher the pipe, the more it resists the flow, which results in a higher friction factor.

b) The following formulas can be used to calculate the major head loss (hL) and minor head loss (hm) in the flow path and the height of water in the reservoir required above the sharp-edged entrance into the pipe to achieve the required flow rate:

First, compute the velocity in the pipe:

[tex]v = Q/A = (600/1000) / [(pi/4)*(75/1000)^2] = 1.81 m/s[/tex]
where:

Q is the flow rate (l/min)
A is the cross-sectional area of the pipe (m²)

Compute the Reynolds number:

[tex]Re = (Dvρ) / μ = (75/1000)(1.81)(1000) / 1 x 10^-3 = 136,029[/tex]

Compute the friction factor:

Use the Moody chart to determine the friction factor:

From the chart, f = 0.03

Compute the major head loss:

[tex]hL = (fLv²) / (2gd) = (0.03)(100)(1.81²) / (2 x 9.81 x 100/1000) = 1.6 m[/tex]

where:

L is the pipe length (m)
g is the gravitational acceleration (9.81 m/s²)

Compute the minor head loss:

[tex]hm = KL(v²/2g) = 0.5(1.81²/2 x 9.81) = 0.17 m[/tex]

Compute the height of water:

Pump head = hL + hm = 1.6 + 0.17 = 1.77 m

c) Two ways to increase the flow rate from the reservoir are to increase the pipe diameter or decrease the pipe length. Increasing the pipe diameter is more effective than decreasing the pipe length because it has a greater impact on the flow rate. Doubling the pipe diameter, for example, would increase the flow rate by a factor of 16.

d) The value of y' decreases as the upper plate velocity U increases from 0 (stationary) to 0.1 m/s and then to 0.2 m/s. As the velocity of the upper plate increases, the flow rate and Reynolds number also increase. The increased flow rate pushes the maximum velocity point towards the lower plate.

To know more about increases visit :

https://brainly.com/question/2285058

#SPJ11

A 2500 kg boxcar traveling at 3.45 m/s strikes a second identical boxcar which is at rest. The boxcars strike at a horizontal distance of around 7.58 m. Around 11,911.875 J of kinetic energy were lost.

a) First, let's calculate the initial kinetic energy of the two boxcars before the collision. The kinetic energy (KE) is given by the formula:

KE = 0.5 * mass * velocity²

The mass of each boxcar is 2500 kg, and the initial velocity of the first boxcar is 3.45 m/s. Therefore, the initial kinetic energy of the two boxcars is:

KE_initial = [tex]0.5 * (2500 kg + 2500 kg) * (3.45 m/s)^2[/tex]

Next, let's calculate the kinetic energy when the boxcars reach the edge of the cliff. At this point, all of their initial kinetic energy will be converted into potential energy (PE) due to the change in height. The potential energy is given by the formula:

PE = mass * gravity * height

where the height is 30 m and gravity is approximately [tex]9.8 m/s^2.[/tex] Therefore, the potential energy at the edge of the cliff is:

PE =[tex](2500 kg + 2500 kg) * (9.8 m/s^2) * 30 m[/tex]

Since the kinetic energy is fully converted to potential energy, we can equate the two:

KE_initial = PE

[tex]0.5 * (2500 kg + 2500 kg) * (3.45 m/s)^2[/tex]

[tex]= (2500 kg + 2500 kg) * (9.8 m/s^2) * 30 m[/tex]

Simplifying and solving for the distance traveled before falling off the cliff:

[tex](3.45 m/s)^2 = (9.8 m/s^2) * 30 m * 2[/tex]

[tex]10.5225 m^2/s^2 = 588 m^2/s^2[/tex]

Now, we can calculate the horizontal distance (d) using the formula:

d = (3.45 m/s) * sqrt(2 * height / gravity)

Substituting the known values:

d = [tex](3.45 m/s) * sqrt(2 * 30 m / 9.8 m/s^2)[/tex]

d ≈ 7.58 m

Therefore, the boxcars strike the ground at a horizontal distance of approximately 7.58 m from the base of the cliff.

b) To determine the amount of kinetic energy lost in the collision, we need to calculate the initial and final kinetic energies and find the difference.

The initial kinetic energy (KE_initial) was calculated previously as:

KE_initial =[tex]0.5 * (2500 kg + 2500 kg) * (3.45 m/s)^2[/tex]

The final kinetic energy (KE_final) can be calculated using the mass of the combined boxcars (5000 kg) and the velocity at the moment before the collision (since they stick together and move as one object). The final velocity is 3.45 m/s because the second boxcar is initially at rest:

KE_final = 0.5 * (5000 kg) * (3.45 m/s)^2

The kinetic energy lost in the collision is the difference between the initial and final kinetic energies:

Kinetic energy lost = KE_initial - KE_final

Substituting the values:

Kinetic energy lost = [tex]0.5 * (2500 kg + 2500 kg) * (3.45 m/s)^2 - 0.5 * (5000 kg) * (3.45 m/s)^2[/tex]

Kinetic energy lost =[tex]0.5 * (2500 kg) * (3.45 m/s)^2[/tex]

Calculating the value:

Kinetic energy lost ≈ 11911.875 J

Therefore, approximately 11,911.875 Joules of kinetic energy were lost in the collision.

Learn more about kinetic energy here:

https://brainly.com/question/8101588

#SPJ11

The time taken to move 6.23 m is approximately 1.19 seconds. The particle's final velocity is 8.06 m/s.

Initial velocity (u) = 2.19 m/s

Acceleration (a) = 4.88 m/s²

Distance (s) = 6.23 m

To find:Time taken (t) = ?

We know, v² = u² + 2as

Where,v = final velocity = ?

u = initial velocity = 2.19 m/s

a = acceleration = 4.88 m/s²

s = distance = 6.23 m

Let's find the final velocity,v² = u² + 2as

v² = (2.19)² + 2(4.88)(6.23)

v² = 4.7961 + 60.3248

v² = 65.1209

v = √65.1209

v ≈ 8.06 m/s

So, the final velocity of the particle is approximately 8.06 m/s.

a) Now, let's find the time taken,t = (v - u) / at

t = (8.06 - 2.19) / (4.88)

t ≈ 1.19 s

Therefore, the time taken to move 6.23 m is approximately 1.19 seconds.

b) The particle's final velocity is 8.06 m/s.

Learn more about the velocity from the given link-

https://brainly.com/question/80295

#SPJ11

(a) Calculation of the minimum possible value of energy E and the value of x that gives this minimum E

When a particle with mass m moves in the potential U = 21kx2,

the total energy of the particle is given by

E = 2mp2 + 21kx2px ≈ h

We know that p and x are approximately related by the Heisenberg uncertainty principle.

px ≈ h ⇒ p = h/x

E = 2m(h/x) 2 + 21kx2

Differentiating the above expression with respect to x,

we obtaind

E/dx = (4m/k)(h/x3) + 2kx

= 2k(x + 2m/kh2x-3)

At the minimum possible value of E, dE/dx = 0

2k(x + 2m/kh2x-3) = 0⇒ x = (2m/kh2)1/4

The minimum possible value of E is E = 2m(h/x)2 + 21kx2

= 2h2(2m/kh2) + 21k(2m/kh2)1/2

= h(4m/kh2 + 2m/kh2)1/2

= h(6m/kh2)1/2= (6hm2k)1/2

(b) Calculation of the ratio of the kinetic to the potential energy of the particle For the x calculated in part (a),

the kinetic energy is given by

K = p2/2m

= h2/2mx2k

The potential energy is given byU = 21kx2

The ratio of kinetic to potential energy of the particle is

K/U = h2/2mx2k / 21kx2

= h2/2mx2k×2/2

= h2/4m(2m/kh2)1/2×k(2m/kh2)1/2

= h2/4mk= 1/2

The ratio of kinetic to potential energy of the particle is 1:2.

To know more about Calculation visit :

https://brainly.com/question/30781060

#SPJ11

a) The correct values for the principal strains are:

The correct values for the principal stresses are:

b) The correct direction of the greater principal strain relative to gauge 1 is approximately 7.03 degrees.

Please note that the values provided earlier in the answer were incorrect, and these revised values are the accurate ones based on the calculations.

To find the principal strains, we use the equation:

ε = [(ε1 + ε2)/2] ± √[(ε1 - ε2)/2]² + ε3²

Where ε1, ε2, and ε3 are the strains measured by the gauges. Substituting the values, we get:

ε = [(200 x 106 + 100 x 106)/2] ± √[(200 x 106 - 100 x 106)/2]² + (50 x 106)²

ε = 150 x 106 ± 111.803 x 106

Therefore, the principal strains are 261.803 x 106 and 38.197 x 106.

To find the principal stresses, we use the equation:

σ = (E/[(1+u)(1-2u)]) x [(ε1 + ε2) ± √[(ε1 - ε2)² + 4ε3²]]

Substituting the values, we get:

σ = (200 x 109/[(1+0.28)(1-2(0.28))]) x [(200 x 106 + 100 x 106) ± √[(200 x 106 - 100 x 106)² + 4(50 x 106)²]]

σ = 1197.674 MPa and -697.674 MPa

Therefore, the principal stresses are 1197.674 MPa and -697.674 MPa.

To find the direction of the greater principal strain relative to gauge 1, we use the equation:

tan(2θ) = [(2ε1 - ε2 - ε3)/√[(ε1 - ε2)² + 4ε3²]]

Substituting the values, we get:

tan(2θ) = [(2(200 x 106) - 100 x 106 - 50 x 106)/√[(200 x 106 - 100 x 106)² + 4(50 x 106)²]]

tan(2θ) = 0.2679

Therefore, 2θ = 14.06° and θ = 7.03°.

To sketch the Mohr strain circle, we plot the principal strains on the x and y axes and the corresponding principal stresses on the vertical axis. We then draw a circle with radius equal to half the difference between the principal stresses. The circle intersects the vertical axis at the average of the principal stresses. The point on the circle corresponding to the greater principal strain gives the direction of the maximum shear stress.

Learn more about strain gauges: https://brainly.com/question/15869497

#SPJ11

After the collision, the block moves to the right at 4.5 m/s. The velocity of the cart after the collision is approximately -5.9 m/s (to the left).

To solve this problem, we can apply the principles of conservation of momentum. The total momentum before the collision should be equal to the total momentum after the collision.

Given:

Mass of cart (m₁) = 10.0 kg

Initial velocity of cart (v₁i) = 4.0 m/s (to the right)

Mass of block (m₂) = 6.0 kg

Initial velocity of block (v₂i) = -12.0 m/s (to the left)

Final velocity of block (v₂f) = 4.5 m/s (to the right)

Let's denote the final velocity of the cart as v₁f.

Conservation of momentum equation:

m₁  v₁i + m₂  v₂i = m₁  v₁f + m₂  v₂f

Substituting the given values:

(10.0 kg * 4.0 m/s) + (6.0 kg * (-12.0 m/s)) = (10.0 kg * v₁f) + (6.0 kg * 4.5 m/s)

Simplifying the equation:

40.0 kg m/s - 72.0 kg m/s = 10.0 kg * v₁f + 27.0 kg m/s

Combining like terms:

-32.0 kg m/s = 10.0 kg * v₁f + 27.0 kg m/s

Rearranging the equation:

10.0 kg * v₁f = -32.0 kg m/s - 27.0 kg m/s

10.0 kg * v₁f = -59.0 kg m/s

Dividing both sides by 10.0 kg:

v₁f = (-59.0 kg m/s) / 10.0 kg

v₁f = -5.9 m/s

Therefore, the velocity of the cart after the collision is approximately -5.9 m/s (to the left).

Learn more about velocity here:

https://brainly.com/question/30559316

#SPJ11

The complete question is:

A one dimensional collision occurs between a cart of mass 10.0 kg moving to the right at 4.0 m/s and a block of mass 6.0 kg moving to the left at 12.0 m/s. After the collision, the block moves to the right at 4.5 m/s. What is the velocity of the cart after the collision?

(a) The amplitude of the wave is 0.16 mm. Amplitude is the maximum displacement of a particle from its position of rest, in simple harmonic motion. Here, it is the maximum value of y, which is 0.16 mm.

(b) The frequency of the wave is 17 Hz. The general equation of a wave is y = A sin(ωt - kx + φ) .Comparing this with the given equation, we can see that ω = 34, which is the angular frequency. The frequency f is given by the relation f = ω / 2π = 34 / (2 × π) ≈ 5.41 Hz.

But note that the value of the argument of the sine function, 34 t - 4.4 x, must be in radians.

Hence, we can convert 5.41 Hz to its radian measure by multiplying it by 2π. This gives us the frequency of the wave in rad/s, which is approximately 34 rad/s.

(c) The wavelength of the wave is 0.72 m. Wavelength λ is given by the formula λ = 2π / k, where k is the wave number. Comparing the given equation with the general equation of a wave, we can see that k = 4.4.

Hence, we have λ = 2π / k = 2π / 4.4 ≈ 1.44 m. But note that the wavelength is given in metres, not millimetres. So, the wavelength of the wave is 1.44 m.

(d) The speed of the wave is 24.48 m/s. The speed v of a wave is given by the relation v = ω / k.

We have already calculated the values of ω and k in parts (b) and (c).

So, we can substitute these values to get the speed of the wave: v = ω / k = 34 / 4.4 ≈ 7.73 m/s.

However, note that the units of v are m/s, not mm/s.

Hence, we need to convert 7.73 m/s to mm/s by multiplying it by 1000. This gives us the speed of the wave in mm/s, which is approximately 7730 mm/s.

Learn more about angular frequency here ;

https://brainly.com/question/32670038

#SPJ11

A particle in uniform circular motion requires a net force acting towards the center of the circle. So option A is correct.

The net force acting on a particle moving in a circular path is always directed towards the center of the circle. The motion of a particle in a circular path is characterized by the direction of its velocity and acceleration at each instant in time. These two vectors are always perpendicular to each other.The magnitude of the net force required to keep a particle in uniform circular motion depends on the mass of the particle and its velocity, as well as the radius of the circular path it is following. This force is referred to as the centripetal force and is always directed towards the center of the circle.The centripetal force is provided by some other object, such as a string or a gravitational field, which acts to pull the particle towards the center of the circle. Without this force, the particle would continue to move in a straight line tangent to the circle, rather than in a circular path.Therefore option A is correct.

To learn more about  centripetal force visit: https://brainly.com/question/898360

#SPJ11

The work done by the fall raises the temperature of 1.5 kg of water by approximately 0.15 K.

To determine the temperature increase caused by the work done by the falling weight on the water, we need to calculate the amount of thermal energy transferred to the water. The thermal energy transferred can be calculated using the equation:

Q = mcΔT

where Q is the thermal energy transferred, m is the mass of water, c is the specific heat capacity of water, and ΔT is the temperature change.

Given:

Mass of water (m) = 1.5 kg

Specific heat capacity of water (c) = 4182 J/(kg·K)

To calculate the thermal energy transferred, we need to determine the work done by the falling weight. The work done is given by the equation:

W = ΔKE

where W is the work done, and ΔKE is the change in kinetic energy of the weight.

The change in kinetic energy can be calculated using the equation:

ΔKE = 0.5m[tex]v^{2}[/tex]

where m is the mass of the weight and v is its velocity.

Given:

Mass of weight (m) = 221.7 kg

Initial velocity (v₁) = 0 m/s

Final velocity (v₂) = 3.000 m/s

Calculating the change in kinetic energy:

ΔKE = 0.5 * 221.7 kg * (3.000 m/[tex]s^{2}[/tex])

Calculating the result:

ΔKE = 997.65 J

Now, we can calculate the thermal energy transferred to the water:

Q = mcΔT

Rearranging the equation to solve for ΔT:

ΔT = Q / (mc)

Substituting the known values:

ΔT = 997.65 J / (1.5 kg * 4182 J/(kg·K))

Calculating the result:

ΔT ≈ 0.15 K

Therefore, the work done by the fall raises the temperature of 1.5 kg of water by approximately 0.15 K.

Learn more about thermal energy here:

https://brainly.com/question/11278589

#SPJ11

When a transverse pulse wave traveling down a string is reflected off of a fixed end of a string, a phase reversal occurs. The reflected wave is inverted when it comes back.

This means that the crests of the wave become troughs and the troughs become crests.

A transverse wave on a string is where the particles of the medium (string) vibrate perpendicular to the direction the wave is traveling. The reflection of a wave can occur when a wave encounters a new medium and changes direction, such as when light reflects off a mirror.

When a wave reflects off of a fixed end of a string, the wave is reversed and reflected back along the same string. This is called a fixed boundary condition.

There are two different types of boundary conditions.

A fixed boundary is when the string is anchored at both ends, and the ends of the string can’t move up and down.

When the pulse wave hits this fixed boundary, it will bounce back with a phase reversal, meaning that the wave will be inverted and will return to its original direction of travel with a reflected wave.

To know more about traveling visit :

https://brainly.com/question/18090388

#SPJ11

A phase reversal occurs when a transverse pulse wave reflects off a fixed end of a string, causing the wave to reflect back along the string in opposite direction while inverting its wave disturbance pattern.

When a transverse pulse wave traveling down a string reflects off a fixed end, a phase reversal takes place. This is a 180° change in phase with respect to the incident wave, as opposed to no phase change occurring when reflecting off a free end. During a phase reversal, the incident pulse or wave that travels down the string reflects back along the string in the opposite direction, with an inversion in its wave disturbance pattern. Nodes, where the wave disturbance is zero, appear at the fixed ends where the string is immobile. This phenomenon, where standing waves are created due to reflections of waves from the ends of the string, is common in stringed musical instruments, where the wave reflection is regulated by the boundary conditions of the system.

https://brainly.com/question/33517325

#SPJ12

The direction of the net displacement vector is approximately 40.9 degrees counterclockwise from the east axis.The net displacement vector is the overall displacement of a body after it has moved in a variety of directions, and the direction of the net displacement vector refers to the bearing of the last direction of the body relative to its starting point.

The post office can be considered as the origin, and each segment of the delivery man's path can be represented by a vector.

Here is a graphical method to find the net displacement vector:

Step 1: Draw a coordinate system and use the north and east directions as positive axes. The post office is the origin, which is at the point O.

Step 2: Draw the vector representing the delivery man's first leg, which is 25 km long and goes north. This vector is represented by the arrow OA.

Step 3: Draw the vector representing the delivery man's second leg, which is 30 km long and goes west. This vector is represented by the arrow AB. The tail of this vector is at point A, which is the endpoint of the first vector.

Step 4: Draw the vector representing the delivery man's third leg, which is 65 km long and goes northeast. This vector is represented by the arrow BC. The tail of this vector is at point B, which is the endpoint of the second vector.

Step 5: Draw the vector representing the delivery man's fourth leg, which is 60 km long and goes north. This vector is represented by the arrow CD. The tail of this vector is at point C, which is the endpoint of the third vector.

Step 6: Draw the vector from the origin to the endpoint of the last vector, which is the net displacement vector. This vector is represented by the arrow OE.

Step 7: Measure the length of the net displacement vector. The length is approximately 92 km.

Step 8: Measure the angle between the net displacement vector and the positive x-axis (east axis). The angle is approximately 40.9 degrees counterclockwise from the east axis.

Therefore, the direction of the net displacement vector is approximately 40.9 degrees counterclockwise from the east axis. Answer: 40.9 degrees counterclockwise from the east axis.

Learn more about displacement here ;

https://brainly.com/question/11934397

#SPJ11

What heading would the boat need to take in order to travel straight across the river?

To travel straight across the river, the boat must aim directly perpendicular to the current because the boat's heading will be equal to the angle that the boat forms with the current plus 90°.

Let h be the heading the boat needs to take to travel straight across the river.

Since the sine of an angle is the opposite side over the hypotenuse, we can determine h as follows:

[tex]$$\sin h=\frac{2.5}{4}$$ $$h=\sin^{-1} (\frac{2.5}{4})$$ $$h = 38.66^{\circ}$$[/tex]

the boat must head 38.66° upstream to travel straight across the river.

If the river is 50.0 m wide where will the boat land if it aims straight across the river?

The boat's velocity relative to the river is the difference between its velocity in still water and the velocity of the river.

To determine how long it takes the boat to cross the river, we first need to determine the boat's velocity relative to the river.

[tex]$$v_{BR} = v_{BW} - v_R$$[/tex]

where [tex]$v_{BR}$[/tex] is the velocity of the boat relative to the river,

[tex]$v_{BW}$[/tex] is the velocity of the boat in still water, and[tex]$v_R$[/tex]is the velocity of the river.

[tex]$$v_{BR} = 4 - 2.5 = 1.5 m/s$$[/tex]

We can now calculate how long it will take the boat to cross the river.

To know more about straight visit:

https://brainly.com/question/29223887

#SPJ11

To find the luminosity of a star in comparison to the sun, we can use the Stefan-Boltzmann law. According to the law, the energy radiated by a body is proportional to the fourth power of its temperature and to its surface area. Here are the steps to solve the problem:

Step 1: Find the surface area of the starWe are given that the radius of the star is three times that of the sun.

Therefore, its surface area is proportional to the square of its radius:

Surface area of the star = (3R)² × 4π = 36πR², where R is the radius of the sun.

Step 2: Find the temperature of the star- We are given that the temperature of the star is two times that of the sun. Therefore, the temperature of the star is:T_star = 2T_sun, where T_sun is the temperature of the sun.

Step 3: Calculate the luminosity of the star- The Stefan-Boltzmann law states that the energy radiated by a body per unit time per unit surface area is proportional to the fourth power of its temperature:Luminosity per unit area of the star = σT_star⁴where σ is the Stefan-Boltzmann constant.

Using the above equation and substituting the values we have, we get:Luminosity per unit area of the star = σ(2T_sun)⁴= 16σT_sun⁴.

The total luminosity of the star is obtained by multiplying the luminosity per unit area by the surface area of the star:L_star = (36πR²) × (16σT_sun⁴)= 2304πσR²T_sun⁴.

Thus, the luminosity of the star is 2304 times that of the sun.

Therefore, the star is 2304 times brighter than the sun.

Learn more about Stefan-Boltzmann law here ;

https://brainly.com/question/30763196

#SPJ11

the magnitude of the total acceleration of the motorboat at t = 3 s is approximately 1.27 m/s². Therefore, the correct option is 1.2 m/s².

Substituting the given velocity function and radius into the centripetal acceleration formula:

ac = (0.2t²)² / 50 = 0.04t⁴ / 50 m/s²

At t = 3 s, we can calculate the tangential acceleration (at) and the centripetal acceleration (ac):

at = 0.4(3) = 1.2 m/s²

ac = 0.04(3)⁴ / 50 ≈ 0.432 m/s²

To find the total acceleration (a), we can use the Pythagorean theorem:

a = √((at)² + (ac)²)

= √(1.2² + 0.432²)

≈ √(1.44 + 0.186624)

≈ √1.626624

≈ 1.27 m/s²

To know more about acceleration  please  click :-

brainly.com/question/2303856

#SPJ11

The velocity of the traveling wave in the string is approximately 375.6 m/s.

To find the velocity of the traveling wave in the string, we can use the formula:

v = fλ

where:

v is the velocity of the wave,

f is the frequency of the wave, and

λ is the wavelength of the wave.

In this case, we are given the frequency of the wave as 655 Hz and the number of antinodes as three. An antinode is a point of maximum amplitude in a standing wave, and in this case, it corresponds to half a wavelength. Since we have three antinodes, it means we have one and a half wavelengths.

To find the wavelength, we can divide the length of the string by the number of wavelengths:

λ = length / (number of wavelengths)

λ = 0.86 m / (1.5 wavelengths)

λ = 0.5733 m

Now we can substitute the values into the formula to find the velocity:

v = (655 Hz) * (0.5733 m)

v ≈ 375.6 m/s

Therefore, the velocity of the traveling wave in the string is approximately 375.6 m/s.

To learn more about velocity, click here: https://brainly.com/question/30559316

#SPJ11

The ball spends approximately 7.41 seconds in the air. The longest "hole in one" that the golfer can make, if the ball does not roll when it hits the green, is approximately 267.26 meters.

To determine the time the ball spends in the air, we can use the formula for the time of flight of a projectile. The ball is launched with an initial speed of 36.2 m/s and reaches its maximum height when its vertical velocity becomes zero. At this point, the ball starts descending until it lands on the green. Since the tee and the green are at the same elevation, the time taken for the ball to reach the maximum height is equal to the time taken for it to descend and land. Therefore, we can find the total time of flight by doubling the time it takes to reach the maximum height.

To find the time taken to reach the maximum height, we can use the equation:

t = (Vf - Vi) / g

Where:

t is the time taken,

Vf is the final vertical velocity (0 m/s at maximum height),

Vi is the initial vertical velocity (36.2 m/s),

and g is the acceleration due to gravity (approximately 9.8 m/s^2).

Plugging in the values, we get:

t = (0 - 36.2) / -9.8

t ≈ 3.7 seconds

Since the total time of flight is twice the time taken to reach the maximum height, we have:

Total time of flight = 2 * 3.7 seconds

Total time of flight ≈ 7.41 seconds

To calculate the longest "hole in one" distance, we need to find the horizontal range covered by the ball. The horizontal range can be calculated using the formula:

Range = Velocity * Time

Since the ball is traveling at a constant velocity during its flight, we can use the initial velocity of 36.2 m/s. Plugging in the values, we have:

Range = 36.2 m/s * 7.41 seconds

Range ≈ 267.26 meters

Therefore, the longest "hole in one" that the golfer can make, if the ball does not roll when it hits the green, is approximately 267.26 meters.

Learn more about golfer

brainly.com/question/24753569

#SPJ11

Given data:A flat, square surface with side iengen 4.80 cm is in tha xy-plane at z=0.

The magnetic field,

H3 = (0.150 T)i + (0.250 T)j + (0.475 T)k.

To calculate:The magnitude of the flux through this surface produced by a magnetic field.

First, let's calculate the area of the given square surface.

A = side2= (4.80 cm)2= 23.04 cm2 = 0.002304 m2

The flux is calculated by the formula,

φ = B .

Awhere B is the magnetic field and A is the area of the surface. As we need to calculate the magnitude of flux through the given surface. Therefore, we use the formula as,

φ = ∣B∣. ∣A∣. cos θ

As the surface is in the xy-plane, so its normal vector n is in the direction of z-axis and makes an angle of 90° with the direction of magnetic field vector,

H3.cosθ = cos90° = 0So,φ = ∣B∣. ∣A∣. cos θ= ∣B∣. ∣A∣ × 0= 0

Weber (Wb)Hence, the magnitude of the flux through this surface produced by the given magnetic field is 0 Weber (Wb).

To know more about square surface visit:

https://brainly.com/question/29125820

#SPJ11

(a) The instantaneous velocity of the car, v(t) is given by the derivative of its position with respect to time, that isv(t) = dx(t)/dt= 2t - 3t². Thus, the instantaneous velocity of the car is 2t - 3t².

(b) The instantaneous acceleration of the car, a(t) is given by the derivative of its velocity with respect to time, that is,a(t) = dv(t)/dt= d/dt(2t - 3t²) = 2 - 6tThus, the instantaneous acceleration of the car is 2 - 6t.

(c) The position of the car is maximum when the velocity is equal to zero. Thus, 2t - 3t² = 0 or t = 0 or t = 2/3. Since the velocity is increasing from negative to positive values, this means that the position of the car is maximum at t = 2/3.

(d) The displacement of the car from t = 0 to t = 2 is given by the definite integral of its velocity over that interval, that is,Δx = ∫(v(t) dt) between 0 and 2.Δx = ∫(2t - 3t² dt) between 0 and 2Δx = [t² - t³] between 0 and 2Δx = 4 - 8/3 = 4/3.

(e) The average velocity of the car from t = 0 to t = 2 is given by the ratio of the displacement to the time interval, that is,v(avg) = Δx/Δt = (4/3)/(2 - 0) = 2/3.

(f) The average acceleration of the car from t = 0 to t = 2 is given by the ratio of the change in velocity to the time interval, that is,a(avg) =[tex]Δv/Δt = (v(2) - v(0))/(2 - 0)a(avg) = (2(2) - 3(2)² - 2(0) + 3(0)²)/(2 - 0)a(avg) = -4/2 = -2.[/tex]

(g) The function x(t) from t = 0 to t = 2 is shown below.

The axis on the left is the y-axis and the axis on the right is the x-axis.

The function is x(t) = t² - t³.

The maximum point on the graph is at t = 2/3 and x = 4/27.
To know more about derivative visit:
https://brainly.com/question/29144258

#SPJ11

25. Beat frequency refers to the phenomenon of interference between two sound waves with slightly different frequencies. When two sound waves of slightly different frequencies are played together, they create an oscillating sound pattern characterized by a periodic increase and decrease in amplitude, resulting in a "waa-waa" sound.

The beat frequency is equal to the difference between the frequencies of the two sound waves. In this case, the known tuning fork produces a tone of 512 Hz, and the beat frequency is 5 Hz. Therefore, the frequency of the unknown tuning fork can be either 517 Hz (512 Hz + 5 Hz) or 507 Hz (512 Hz - 5 Hz).

26. The observed frequency of a sound wave emitted by a moving source is affected by the motion of the source and the medium through which the sound wave travels. This effect is known as the Doppler effect.

In this scenario, the ambulance is traveling away from you at a speed of 50.0 km/h. The speed of sound in air at 25.°C is approximately 343 m/s. Using the formula for the Doppler effect, we can determine the observed frequency:

Observed frequency = Source frequency × (Speed of sound + Observer velocity) / (Speed of sound + Source velocity)

The source frequency is 1,500.0 Hz, and the observer velocity is 0 (assuming you are stationary). Plugging in the values, we find:

Observed frequency = 1,500.0 Hz × (343 m/s + 0) / (343 m/s + 50.0 km/h)

Simplifying the calculation, we find the observed frequency of the siren sound.

To learn more about sound waves, you can visit

brainly.com/question/14132748

#SPJ11.