Mike dissolves equal amounts of potassium chloride (KCl) and table sugar (C12H22O11) in the same container of water.

After both substances fully dissolve, what atoms or molecules remain in the water?


A. molecules of KCl and individual atoms of C, H, and molecules of KCl and individual atoms of C, H, and O , ,


B. individual atoms of K and Cl and molecules of C12 H22 O11 individual atoms of K and Cl and molecules of C12, H22, O11, , ,


C. molecules of KCl and C6 H12 O6 molecules of KCl and C6, H 12, O6, , ,


D. individual atoms of K, Cl, C, H, and O

During action potential, positively charged  sodium ions move inside the cell.

So option D is correct one.

The sodium ion moves inside the cell during a action potential. The stage of action potential is called depolarization . This open voltage gated sodium channel.

Action potentials ( those electrical impulse that send signals around body )  is nothing but more than temporary shift ( from negative to positive ) in the neuron's membrane potential caused by ions suddenly flowing in and out of the neuron.

It consists of phases:

An active potential propagates along the cell membrane of an axon until  it reaches the terminal button.

to known more about action potential

https://brainly.com/question/27095019

#SPJ4

Standard enthalpy change of neutralization is the enthalpy change when 1 mole of water is produced by the reaction of an acid and a base under standard conditions.

Enthalpy change of neutralization:

Learn more about the Enthalpy of neutralization with the help of the given link:

https://brainly.com/question/15347368

#SPJ4

4Na + O₂ → 2Na₂O is balanced equation.

Hence, Option (B) is correct answer.

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now check all the options one by one:

Option (A): 2H₂ + O₂ → 4H₂O

Reactant Side               Product Side

H = 4                               H = 8

O = 2                               O = 4

Here number of atoms of H on the reactant side is 4 and number of atom on product side is 8. H atoms are not balanced in this equation. Hence the given equation is not balanced.

Option (B): 4Na + O₂ → 2Na₂O

Reactant Side               Product Side

Na = 4                            Na = 4

O = 2                              O = 2

Here all the atom on reactant side and product side are equal. Hence the given equation is balanced.

Option (C):  Fe₂O₃ + H₂ → 2Fe + 3H₂O

Reactant Side               Product Side

Fe = 2                              Fe = 2

O = 3                                O = 3

H = 2                                H = 6

Here number of atoms of H on the reactant side is 2 and number of atom on product side is 6. H atoms are not balanced in this equation. Hence the given equation is not balanced.

Option (D): CH₄ + O₂ → CO₂ + H₂O

Reactant Side               Product Side

C = 1                                C = 1

H = 4                               H = 2

O = 2                               O = 3

Here H atoms on the reactant and product side is not equal and O atoms are also not equal on the reactant side and product side. Hence, the given equation is not balanced.

Thus from the above conclusion we can say that The balanced equation from the given options is 4Na + O₂ → 2Na₂O

Hence, Option (B) is correct answer.

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: Which of the following equations is balanced?

(A) 2H₂ + O₂ → 4H₂O

(B) 4Na + O₂ → 2Na₂O

(C) Fe₂O₃ + H₂ → 2Fe + 3H₂O

(D) CH₄ + O₂ → CO₂ + H₂O

Learn more about the Balanced Chemical Equation here: https://brainly.com/question/26694427

#SPJ1

What's the effect of surface area change

We know

Pressure is indirectly proportional to area

Answer:

mass = 107.04 g

Explanation:

The formula for mass is:
[tex]\boxed{mass = mole \space\ no. \times \space\ molar \space\ mass}[/tex].

In this case:

• molar mass = 32.06 g/mol

• mole no. = [tex]\frac{no. \space\ of \space\ atoms}{Avogadro's \space\ number}[/tex]

               = [tex]\frac{2.01 \times 10^{24}}{6.02 \times 10^{23}}[/tex]

               = 3.339 mol

Substituting these values into the formula for mass :

mass = 3.339 mol × 32.06 g/mol

         = 107.04 g

The answer is 107.04 g.

The first step is to find the number of moles of sulfur.

Number of moles = No. of atoms ÷ Avogadro No.

Now, to find the mass, multiply the number of atoms by the molar mass.

The Rutherford experiment was used to prove the existence of a positively charged nucleus containing the protons.

The Rutherford experiment was used to prove the existence of a positively charged nucleus..

Alpha particles passed mostly undeflected through a aluminum foil.

The part of the foil where the alpha particles were deflected  was the positively charged nucleus where most of the mass of the atom was concentrated.

In conclusion, the Rutherford experiment proved the existence of a positively charged nucleus.

Learn more about Rutherford experiment at: https://brainly.com/question/14996029

#SPJ1

1. The first step is to convert your given masses into moles. This way, you can see which reactant is in excess and which one is limiting. A good flow of thought would be: kilograms of SiO2/Carbon→ grams SiO2/Carbon→moles SiO2/Carbon.

2. Repeat this step for the carbon reactant.

3. By comparison, we can tell that the carbon reactant is in excess, which means that the SiO2 reactant is limiting. Because of this, we’ll use the amount of SiO2 to find our percent yield. There’s only so much SiO2 that can react with the carbon.

4. You can now calculate the actual and theoretical yields. The theoretical yield is larger than the actual yield because it does not have physical interactions like loss of energy to the environment and friction to interfere with the reaction.

5. Now compare your two values of actual and theoretical. The formula for percent mass is [(Actual yield)/(Theoretical yield)]*100%. Our final answer for this question is the percent yield of the reaction is 90.8% We can interpret this as 90.8% of the SiO2 reacting will produce solid silicon.

Hope this helps!!

The chemical equation of photosynthesis includes 6[tex]O_{2}[/tex]. -----a gas produced during photosynthesis best describes this substance

Elaborate:

During photosynthesis plants use carbon dioxide, water and sunlight to make sugar (glucose) and a waste product, oxygen gas.

the equation of this process can be:

6 [tex]CO_{2}[/tex] + 6 [tex]H_{2} O[/tex] + light energy  →  [tex]C_{6} H_{12} O_{6}[/tex] + 6 [tex]O_{2}[/tex]

carbon dioxide + water + light  →   glucose + oxygen

Is 6[tex]O_{2}[/tex] a product of photosynthesis?

In photosynthesis, energy from light is used to convert carbon dioxide and water into glucose and oxygen. For 6 carbon dioxide and 6 water molecules, 1 glucose molecule and 6 oxygen molecules are produced.

What happens to sugar water oxygen and carbon dioxide during photosynthesis?

During photosynthesis, plants take in carbon dioxide  and water  from the air and soil. Within the plant cell, the water is oxidized, meaning it loses electrons, while the carbon dioxide is reduced, meaning it gains electrons. This transforms the water into oxygen and the carbon dioxide into glucose.

Learn more about photosynthesis:

brainly.com/question/19160081

#SPJ4

Percent ionization = 3.17%

We utilize the supplied acid equilibrium constant (Ka) to calculate the percentage of the acid that is ionized. It is the ratio of the acid and dissociated ion equilibrium concentrations. The HF acid would dissociate in the manner described below:

HF = H+ + F-

The following is how the acid equilibrium constant might be written:

Ka = [H+][F-] / [HF] = 3.5 x 10-4

We utilize the ICE table to determine the equilibrium concentrations.

        HF             H+              F-

I      0.337           0                 0

C      -x              +x               +x

---------------------------------------------

E    0.337-x        x                   x

3.5 x 10-4 = [H+][F-] / [HF]

3.5 x 10-4 = [x][x] / [0.337-x]

Solving for x,

x = 0.01069 = [H+] = [F-]

percent ionization = 0.01069 / 0.337 x 100  = 3.17%

percent ionization = 3.17%

To learn more about percent ionization visit:

https://brainly.com/question/14225136

#SPJ4

Answer:

A.) Brønsted-Lowry bases

Explanation:

Amines have a lone pair of electrons.

Brønsted-Lowry bases donate a lone pair of electrons in exchange for a hydrogen ion.

Therefore, if exposed to an acid, amines will give up electrons in order to bond with a hydrogen. This makes them Brønsted-Lowry bases.

Semiconductors show the property of both the conductor and insulator. They are more effective than metals as their valence electron can free flow by the sun's energy. Thus, option B is correct.

Semiconductors are substances and materials that exhibit intermediate properties of conductors and insulators. They are solid materials that can conduct electrical charges due to the added impurity or change in temperature.

They have a valence electron in their outer shell that can absorb the energy from the sun to get excited. This leads to the flow of the charge in the semiconducting substance more easily.

Therefore, option B. the semiconductors can absorb the extra energy is correct.

Learn more about semiconductors here:

https://brainly.com/question/18132856

#SPJ4

Your question is incomplete, but most probably your full question was, Semiconductors are more effective than metals as converters of solar radiation into electricity because

A. it is easier for the atoms of a semiconductor to absorb solar energy and to move from place to place within the solid, thereby conducting electricity.

B. the energy contained in sunlight gives the valence electrons in the semiconductor atoms the extra energy they need to "flow" throughout the solid.

C. metals melt much too easily under direct sunlight and, as liquids, lose their ability to conduct electricity.

D. solar radiation has sufficient energy to knock electrons completely off the metal surface, making it impossible for the electrons to "flow" from atom to atom and conduct electricity.

Answer:

2-methylpropanoic acid

Explanation:

no probs chief

The volume occupied by 3.66 x [tex]10^{23}[/tex] atoms of lithium is 7.73 [tex]cm^3[/tex]

The density of a substance is defined as the mass of the substance per unit volume. It is often denoted by the symbol ρ

The density of a substance is given by,

[tex]\rho = \frac{m}{V}[/tex]

The mass of a substance is the measure of the amount of matter present in it. It is generally measured in grams (g) or kilograms (kg).

The volume of a substance is defined as the amount of 3D space occupied by it.

It is a concept which uses mole as a unit to measure the number of atoms, molecules or ions.

A mole is defined as the amount of substance which has the same number of elementary particles as there are atoms in 12 grams of [tex]\ce{^{12}C}[/tex]

1 mole = Avogadro's number = 6.022 x [tex]10^{23\\[/tex] atoms

Molar Mass of Lithium = 6.94 g/mol

1 mole of Lithium has 6.022 x [tex]10^{23}[/tex] atoms

3.66 x [tex]10^{23}[/tex] atoms of lithium has molar mass = [tex]\frac{6.94 g}{6.022\times10^{23} } \times 3.66 \times 10^{23}[/tex]

[tex]m = 4.218 g[/tex]

Substitute in density formula,

[tex]\rho = \frac{m}{V}[/tex]

[tex]V = \frac{m}{\rho}[/tex]

[tex]=\frac{4.218g}{0.546g/cm^3}[/tex]

= 7.73 [tex]cm^3\\[/tex]

Therefore, 3.66 x [tex]10^{23}[/tex] atoms of lithium occupies 7.73 [tex]cm^3\\[/tex] of volume.

Learn more about the mole concept:

https://brainly.com/question/1427235

#SPJ4

The boiling point of water would increase by 1°C if 1 mol of NaCl added 1 kg of water.

The addition of solute substances to solvent such as water results in a change in the boiling points and freezing points of the solvents.

The formula to calculate the change in temperature is given below:

ΔT = Kbmi

Where;

m is molality of the solution

Kb and i are constants.

Solving for change in temperature:

m = 1 mol/kg

ΔT = 0.51 * 1 * 2

ΔT = 1°C

The normal boiling point of water is 100°C

The new boiling point of the solution = (100 + 1) = 101 °C

In conclusion, addition of solute to solvent will result in change in the boiling point of the solvent.

Learn more about boiling point at: https://brainly.com/question/14557986

#SPJ1

The pH of the buffer made by combining Nitrous acid and Sodium Nitrite will be 3.06.

pH can be defined as the medium of expressing the acidity or alkalinity of any solution. It is the potential of hydrogen atoms.

Buffers are the solutions that resist any change in the pH when an acid or base is added to them.

According to the question,

0.150 M nitrous acid (HNO₂) = 45 ml

0.175 M sodium nitrate (NO₂⁻)= 20 ml

Kₐ of nitrous acid (HNO₂) = 4.5 × 10⁻⁴

Total volume of buffer = 45 ml + 20 ml = 65 ml

Concentration of HNO₂ = (45) (0.150) / 65 = 0.103 M

Concentration of NO₂⁻ = (20) (0.175) / 65 = 0.054 M

                     HNO₂  ⇒ H⁺ + NO₂⁻

Initial :          0.103        0     0.054

Change:         -x             +x       +x

Equilibrium: 0.103-x        x       0.054+x

Kₐ = x(0.054+x) / 0.103-x = 0.054x / 0.103 = 0.524x

Also, Kₐ = 4.5 × 10⁻⁴

Therefore, 4.5 × 10⁻⁴ = 0.524x

                              x = 8.58 × 10⁻⁴ M

H⁺ = x = 8.58 × 10⁻⁴ M = 8.6 × 10⁻⁴ M

Therefore, pH = -log ( 8.6 × 10⁻⁴ M)

                 pH = 3.06

To know more about pH, here

brainly.com/question/2288405

#SPJ4

Four different substituents are required on a carbon atom for it to be chiral.

The carbon atom which is attached with four different types of group of atoms or atoms is called Chiral carbon. Chiral molecules are non superimposable on their mirror images. Chiral carbon is also called asymmetric carbon.

Example:

[tex]Br - \underset{H} {\underset{|} {\overset{CH_3} {\overset{|}{C}}}} - Cl[/tex]

In the above example we can see that carbon atom has 4 different group attached with it that is Br, Cl, H, CH₃.

Thus from the above conclusion we can say that Four different substituents are required on a carbon atom for it to be chiral.

Learn more about the Chiral carbon here: https://brainly.com/question/1195366

#SPJ4

Taking into account the scientific notation,  the result of the subtraction is 6.5×10⁵.

First, remember that scientific notation is a quick way to represent a number using powers of base ten.

The numbers are written as a product:

a×10ⁿ

where:

You want to subtract two numbers in scientific notation. It should be noted that when the numbers to be added do not have the same base 10 exponent, the base 10 power with the highest exponent must be found. In this case, the highest exponent is 5.

Then all the values ​​are expressed as a function of the base 10 exponent with the highest exponent. In this case: 5.00×10⁴=0.500×10⁵

Taking the quantities to the same exponent, all you have to do is subtract what was previously called the number "a". In this case:

7.00×10⁵ - 0.500×10⁵= (7.00- 0.500)×10⁵= 6.5×10⁵

Finally, the result of the subtraction is 6.5×10⁵.

Learn more about scientific notation:

brainly.com/question/11403716

brainly.com/question/853571

#SPJ1

The molarity of the solution is 0.32 M

Calculation,

Molarity of the solution is the total number of moles present in volume in liter.

molarity = number of moles/volume in liter = n/V                  ...(i)

Number of moles of sulfuric acid = given mass/molar mass

Number of moles of sulfuric acid (n) = 16g/98.079g/mol = 0.16 mole

Volume of the solution (V) = 0.5 L

Putting the value of volume and number of moles in equation (i) we get,

molarity = 0.16 mol/0.5 L = 0.32 mol/L = 0.32 M

Learn more about molarity

https://brainly.com/question/8732513

#SPJ4

Markovnikov addition product from the addition of hi to 2-methyl-2-butene is 2-iodo-2-mehtylbutane.

What is Markonikov rule?

To learn more about Markonikov rule from the  given link

https://brainly.in/question/232893

#SPJ4

The equilibrium constant for the un-catalyzed reaction is 0.9

The enzyme triose phosphate isomerase catalyzes the reaction in the forward direction as part of the glycolytic pathway. It follows simple Michaelis-Menten kinetics.

Typical cellular concentrations:

triose phosphate isomerase = 0.1 nM

dihydroxyacetone phosphate = 5 µM

glyceraldehyde-3-phosphate = 2 µM

So, equillibrium constant is

K = [tex]\frac{[P]}{[S]}[/tex]

K = [tex]\frac{ glyceraldehyde-3-phosphate}{dihydroxyacetone phosphate}[/tex]

Therefore, The equilibrium constant for the un-catalyzed reaction is 0.9

Learn more about equillibrium here;

https://brainly.com/question/25657597

#SPJ4

When 25.0 g of Mg react with 25.0 g of O₂ it produce 41.9g of MgO.

Chemical reaction:

2Mg + O₂ → 2 MgO

Given,

Mass of Mg = 24g

Mass of O₂ = 25 g

Molar mass of O₂ = 16×2

= 32 g

Molar mass of Mg = 24.3

Moles of Mg  =25/24.3

=1.04mole

Moles of O₂  =25/32

=0.78mole

From above reaction we can say that 2moles of mg react with 1moles of O₂ to give 2moles of MgO.

So, 1 mole of Mg react with 0.5 mole of O₂ to produce 1mole of MgO.

So, 1.04 react with= 0.5× 1.04

= 0.520 g oxygen to give 1.04 moles of MgO.

From above we can say that Mg is limiting reagent.

Moles of MgO =1.04

Molar mass of MgO =40.3

Mole =given mass/ molar mass

1.04  =mass/ 40.3

Mass = 1.04×40.3

41.9 g

Thus, from above we concluded that 25.0 g of Mg react with 25.0 g of O₂  it produce 41.9g of MgO.

Learn more about limiting reagent: https://brainly.com/question/26905271

#SPJ4

Pt195 having 78 atomic number is the daughter nucleus produced when Au195 undergoes electron capture.

An unstable isotopes can undergoes radioactive decay to form a more stable isotopes . Initial isotopes is called parent nuclide and the resultant isotopes from radioactive decay is called the daughter nuclide There are several radioactive decay like alpha decay , beta decay  , gamma decay , electron capture etc .

In electron capture , the atom have only one less which is daughter isotopes than electron than atomic number of parent isotopes.

learn more about isotopes,

https://brainly.com/question/11680817

#SPJ4

Answer:

pH of  4

Explanation:

Upon comparing a solution with a pH value of 4 and that having a pH of 7, you will realize that it has a pH difference of 3 although the concentration of ions of hydrogen having a pH of 7 is 1000 times greater than being at a pH of 4.

Cis-platin is a chemotherapy agent used to treat and kill cancerous cells in patients. One mole of cis-platin has a mass of 300.06 grams/mol. Thus, option B is correct.

A chemotherapy agent is an alkylating agent that is used to treat cancer and is given to reduce the infection or to relieve the symptoms. Cis-platin (Pt(NH₃)₂Cl₂) is one of the chemotherapy agents that treat lung, ovarian, and neck cancer, etc.

The mass of one mole of Cis-platin is calculated as,

Moles = mass ÷ molar mass

Where,

Moles = 1 mole

The molar mass of (Pt(NH₃)₂Cl₂) is calculated as,

195.06 g/mole + 2(17g/mole) + (35.5)2 = 300.06 grams

Substituting values to calculate mass:

Mass = Molar mass × moles

= 300. 06  × 1

= 300.06 grams/mol

Therefore, option B. 300.06 gm/mol is the mass of Cis-platin.

Learn more about chemotherapy agents here:

https://brainly.com/question/14260402

#SPJ4

Your question is incomplete, but most probably your full question was, Cis-platin is a chlorine-containing chemotherapy agent with the formula pt(nh3)2cl2. What is the mass of one mole of cis-platin?

The value for this aqueous reaction at 298 k? a b↽−−⇀c dδ°=20. 46 KJ/mol is 9.91 mol. in equilibrium

When a chemical reaction happens at the liquid state and the formation of reactant and product is the same then the reaction is known as an aqueous reaction in equilibrium denoted by K.

δG = − R T ln

          R = universal gas constant 8.313

          δG= 20. 46 kj/mol

           T =  298 k or 24.4 in celcius.

substituting the value in the equation.

20. 46 kj/mol = 8.313 × 24.4 in celcius × K

K =  8.313 × 24.4 in celcius / 20. 46 kj/mo

k = 9.91 mol .

Therefore, The value of this aqueous reaction at 298 k? a b↽−−⇀c dδ°=20. 46 KJ/mol is 9.91 mol. in equilibrium

Learn more about the aqueous reaction in  equilibrium, here:

https://brainly.com/question/8983893

#SPJ4

Answer:

1363.2 kilocalories

Explanation:

Heat up the ice ==> melt the ice to water ==> heat the water ==> vaporize the water to steam ==> heat the stem 52 degrees to 152

1.81 kg * (spec heat of ice * 19  +* heat of fusion of water + specific heat of water *100 +  heat of vaporization of water + specific heat of steam* 52)

1810 g  * ( .50 cal/g -C * 19 C    +  79.7 cal / g   +  1 cal/g-C  *100C   +  539 cal/g + .48 cal/g * 52 C ) = 1 363 219.6 calories

(check my math)

The acid dissociation constant (Ka) defines the difference between a weak and a strong acid. The % ionization of hypochlorous acid is 0.14%.

The acid dissociation constant is used to define the ionization constant of an acidic substance. It gives the quantitative measurement of the strength.

The ICE table is attached to the image below.

The acid dissociation constant (Ka) for the reaction is,

Ka = [H⁺][ClO⁻] ÷ [HClO]

= a² ÷ (0.015 - a)

= 3.0 x 10⁻⁸

Now, a² + 3.0 x 10⁻⁸ a - 4.5 × 10⁻¹⁰ = 0

So, a = 2.210 × 10⁻⁵

Solving further,

[H+] = a = 2.210 × 10⁻⁵ M

The percent ionization is calculated as,

[H+] ÷ [HClO] × 100

= 2.210 × 10⁻⁵ M ÷ 0.015 × 100

= 0.14 %

Therefore, 0.14 % is the percentage of hypochlorous ionization.

Learn more about acid dissociation constant here:

https://brainly.com/question/22668939

#SPJ4

Your question is incomplete, but most probably your full question was, The ka of hypochlorous acid (HClO) is 3.0 x 10⁻⁸ at 25.0°C. What is the % of ionization of hypochlorous acid in a 0.015 aqueous solution of HClO at 25.0C?

Answer: electrostatic attraction

Explanation: ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound.

The answer is 100 Pa.

The formula for calculating pressure is :

Pressure = Force ÷ Area

We are given that :

We also know that :

Force = mass ×g

So, force will be :

Now, we can finally calculate pressure :

cesium chloride is another chloride that could be used instead of the calcium chloride dihydrate to produce a solid precipitate with aqueous sodium carbonate

A mineral salt called cesium chloride (CsCl) is occasionally ingested or administered intravenously to cancer patients seeking alternative therapies. However, the FDA has not yet approved any cesium chloride products to treat cancer or other disorders.

In isopycnic centrifugation, cesium chloride is a common medical compound used to separate different forms of DNA. It is a reagent used in analytical chemistry to distinguish ions based on the hue and shape of the precipitate.

Cesium chloride is not proven to be effective in treating cancer. As an alternative to chemotherapy for cancer, cesium chloride is pushed. Supporters assert that cesium prevents tumor cells from proliferating by neutralizing the poisons they release.

To learn more about cesium chloride please visit -
https://brainly.com/question/11109113
#SPJ4