Liquid acetaminophen for children is labeled 180 mg 3 ml. The strength expressed as grams per ml is 0.060.
What is acetaminophen?
Acetaminophen is a medicine that is used to treat all kind of pains. Headache, menstrual pain, stomach ache, etc. It also used to reduce fever and cold/cough.
Liquid acetaminophen for children is labeled as 180 mg/ 3ml
The 180 mg will be divided by 3 ml
180 mg/ 3ml = 60 mg/ml
The amount will be multiplied by 1 /1000 to get the quantity equal.
60 mg/ml x 1g / 1000 g
60 x 1/ 1000 mg/ml = 0.060
Thus, the strength expressed as grams per ml is 0.060.
To learn more about acetaminophen, refer to the link:
https://brainly.com/question/1869865
#SPJ4
A solution has a poh of 7. 1 at 10∘c. what is the ph of the solution given that kw=2. 93×10−15 at this temperature? remember to report your answer with the correct number of significant figures
A solution has a pOH of 7. 1 at 10∘c. Then the pH of the solution given that kw=2. 93×10−15 at this temperature is 7.4 .
It is given that,
pOH of solution = 7.1
Kw =2.93×10^(-15)
Firstly, we will calculate the value of pKw
The expression which we used to calculate the pKw is,
pKw=-log [Kw]
Now by putting the value of Kw in this expression,
pKw =−log{2.93×10^(-15)}
pKw =15log(2.93)
pKw=14.5
Now we have to calculate the pH of the solution.
As we know that,
pH+pOH=pKw
Now put all the given values in this formula,
pH+7.1=14.5
pH=7.4
Therefore, we find the value of pH of the solution is, 7.4.
learn more about pH value:
https://brainly.com/question/12942138
#SPJ4
When 20. 0 g nh3 and 50. 0 g o2 are allowed to react, which is the limiting reagent?
When 20. 0 g NH₃ and 50. 0 g O₂ are allowed to react, NH₃ is the limiting reagent.
What is limiting reagent ?Limiting reagent is defined as that reactant in a chemical reaction which is completely consumed in reaction.
Given,
Mass of NH₃ = 20 g
Mass of O₂ = 50 g
Molecular mass of NH₃ = 14 + 7 = 17 g
Molecular mass of O₂ = 2 × 16 = 32 g
Mole = given mass/ molecular mass
Mole of ammonia = 20/17
= 1.17 mole
Moles of O2 = 50/32
= 1.56 mole
Chemical equation:
4NH₃(g) + 3O₂(g) ⟶ 2N₂(g) +6H₂O
From above reaction it is clear that 4 moles of NH₃ react with 3 moles of oxygen.
So, 1 mole of ammonia react with = 3/4 moles of O₂
= 0.75 moles of O₂
Also, 1.18 moles of ammonia react with
= 1.18 × 0.75
= 0.885 moles of O₂
Thus, from above we concluded that ammonia is completely consumed in reaction. Therefore ammonia is limiting reagent.
Learn more about Limiting reagent:
https://brainly.com/question/26905271
#SPJ4
Adding heat to a substance group of answer choices sometimes does not result in a temperature change. always results in a temperature increase. sometimes results in results in a temperature decrease.
Sometimes adding heating of substance set of answer options does not cause a change in temperature. resulting in an increase in temperature every time. results occasionally in a drop in temperature.
A substance's atoms and molecules move more quickly when it is heated. Whether the substance is a solid, liquid, or gas, this occurs. However, the temperature does not always rise when more heating of substance is added. For instance, adding heat to boiling water will not raise its temperature. This occurs when the heating of the substance reaches its boiling point, which is for all vaporizable substances. The average kinetic energy of the molecules will fluctuate when a system gains or loses heat. So long as a phase shift is not taking place, heat transfer causes a change in the system's temperature.
To learn more about heating of substances please visit-
https://brainly.com/question/20400563
#SPJ4
This cement should string up and break approximately 1 inch from the slab. Group of answer choices Zinc Phosphate Zinc Oxide Intermediate restorative material Glass Ionomer
The given description details the methods that are used in Mixing Zinc Phosphate for Permanent Cementation,
The complete description contains the following details:
Personal protective equipment (PPE) is required for the healthcare team, and the student is required to identify and prepare the instrument setup.
Equipment and Supplies
• Glass slab (cool)• Spatula (flexible stainless steel)• Zinc phosphate powder and dispenser• Zinc phosphate liquid and dropper• 2 × 2-inch gauze padsWhat is Cementation?This refers to the use of cement to create a building structure that is used to keep things in place.
Hence, we can see that the Procedural Steps include:
Preparing the Mix
1. Dispense the powder toward one end of the slab and the liquid toward the opposite end.
2. Recap the containers.PURPOSE These materials can be affected by prolonged exposure to the humidity.
3. Divide the powder into small increments as directed by the manufacturer.
4. Incorporate each powder increment into the liquid.NOTE When increment sizes vary, smaller increments are used first. Mixing time per increment also varies; the time is approximately 15 to 20 seconds.
5. Spatulate the mix thoroughly, using broad strokes or a figure-8 movement over a large area of the slab.PURPOSE This aids in dissipating the heat generated during mixing.
6. Test material for appropriate cementation consistency. The cement should string up and break about 1 inch from the slab. Total mixing time is approximately 1 to 2 minutes
Read more about cementation here:
https://brainly.com/question/19068469
#SPJ1
Which is an aspect of the kinetic-molecular theory and can be used to explain the compressibility of plasma
The answer choice which represents an aspect of the kinetic-molecular theory and can be used to explain compressibility of plasma is; Particles move independently of one another and are widely spaced.
What is the kinetic-molecular theory?The kinetic-molecular theory in discuss postulates about the states of matter.
Also, it is built upon the idea that matter is composed of tiny particles that are constantly in motion.
Hence, the theory is explanatory of the observable properties and behaviours of solids, liquids and gases and hence, explains the compressibility of plasma.
Remarks;
Particles move independently of one another and are widely spaced. Particle kinetic energy increases with increasing temperature. Particles exert no attractive or repulsive force on one another. Particles always move even when they have fixed positions.Read more on kinetic molecular theory;
https://brainly.com/question/2773301
#SPJ1
How many half-lives have passed in a sample that originally contained 5000 parent isotopes but now has only 625?
Answer:
3 half lives
Explanation:
5000 * (1/2)^n = 625 where n = number of half lives
log ( 625/5000) / log(1/2) = n = 3
5000 2500 1250 625
How does the enthalpy of photosynthesis compare to the
enthalpy of cellular respiration?
The results of photosynthesis are used by cellular respiration, and photosynthesis first uses the results of cellular respiration.
Enthalpy of photosynthesis and cellular respiration:In the mitochondria, cellular respiration combines oxygen and glucose to produce ATP, along with water and carbon dioxide. Sunlight energy is used during photosynthesis to create glucose and separate oxygen from carbon dioxide and water. Globally, the exchange of carbon dioxide and oxygen during photosynthesis or cellular respiration serves to maintain stable levels of oxygen and carbon dioxide in the atmosphere.
Cellular Respiration: [tex]C_6H_1_2O_6+ 6O_2[/tex] → [tex]6CO_2 + 6H_2O[/tex]
Because CO₂ and H₂O are less energetic than the reactants, most notably glucose, the reaction is exothermic and has a negative enthalpy (ΔH < 0). This also makes sense because breathing causes glucose to be converted to energy.
Photosynthesis: [tex]6CO_2 + 6H_2O[/tex]→ [tex]C_6H_1_2O_6+ 6O_2[/tex]
The enthalpy change for the photosynthesis reaction is +2814 kJ/mol.
Learn more about enthalpy here:
https://brainly.com/question/10729760
#SPJ1
What instrument is used for measuring the heat energy absorbed or released in a chemical reaction?
Select true or false: in the reaction ag (aq) cl–(aq) → agcl(s), ag acts as a lewis acid
In the given reaction, Ag is acting as Lewis acid. the given statement is true.
What is Lewis acid?A Lewis acid is a chemical substance with an empty orbital that can accept an electron pair from the a Lewis base to establish a Lewis adduct.
Because the silver atom has an open valence shell, AgCl is a Lewis acid. Lewis acid is an atom, ion, or molecule with an incomplete electron octet.
Even though Ag+ can accept an electron pair, it acts as a Lewis acid. It will then combine with chlorine and form AgCl.
Thus, the given statement is true.
For more details regarding Lewis acid, visit:
https://brainly.com/question/15220646
#SPJ4
What is the purpose of adding 0. 1% agar to the trypticase nitrate broth when conducting the nitrate reduction test?.
Agar is used to assist establish an anaerobic environment that promotes nitrate reduction.
Nitrate Reduction test:
The nitrate in the broth is converted to nitrite by organisms that can produce the nitrate reductase enzyme, which can then be further converted to nitric oxide, nitrous oxide, or nitrogen. Anaerobic respiration and denitrification are two processes that can convert nitrate to a variety of compounds. While denitrification only reduces nitrate to molecular nitrogen, anaerobic respiration employs nitrate as the bacterium's final electron acceptor, reducing it to a range of chemicals.The nitrate reduction test is based on the detection of nitrite and its capacity to produce a red precipitate (prontosil), which is a water-soluble azo dye, when it combines with sulfanilic acid to create a complex (nitrite-sulfanilic acid).Learn more about the Nitrate reduction test with the help of the given link:
https://brainly.com/question/11181586
#SPJ4
Consider a 100-gram sample of radioactive cobalt-60.
How much time will it take before half the sample has decayed?
It will take 5.2 years to decay.
The half life of cobalt-60 is 5.2 years. The half life is the time taken for the mass of the substance to decrease by a half.
here, the amount of remaining substance is 50%,
so, [tex](\frac{1}{2} )^{n} = 0.5[/tex]
n. log (0.5) = log (0.5)
n = 1
So it would take 1 half lives to decay this much, which is 1 x 5.2 which is 5.2 years.
what do you mean by radioactive decay ?
The process through which an unstable atomic nucleus loses energy via radiation is known as radioactive decay, also known as nuclear decay, radioactivity, radioactive disintegration, or nuclear disintegration. A material that has unstable nuclei is considered as radioactive.
Learn more about decay here:-
https://brainly.com/question/13853996
#SPJ1
Which type of molecule are lipids mostly made of non-polar polar protein or water?
The lipids are mostly made up of non-polar molecule type .
So , first option is correct one.
Lipids contains same elements as the carbohydrates like carbon , hydrogen , and oxygen ( C , H and O) . However lipids are mainly made up of hydrocarbon chain ( or rings ) and contain few polar hydroxyl groups ( -OH ) . This makes the most lipids non - polar hydrobhobic molecules and hey are not dissolve well in water. The lipids are mainly made up of glycerol and fatty acids .
To learn more about non-polar molecule please click here
https://brainly.com/question/1946554?
#SPJ4
A solution of acetic acid, hc2h3o2, on a laboratory shelfwas of undetermined concentration. if the ph of the solution wasfound to be 2. 68, what was the concentration of the acetic acid?
A solution of acetic acid , on a laboratory shelf was of undetermined concentration. if the pH of the solution was found to be 2. 68 , then its the concentration of the acetic acid was 2×[tex]10^{-3}[/tex]
Calculation ,
A figure expressing the acidity or alkalinity of a solution on a logarithmic scale on which 7 is neutral, lower values are more acid and higher values more alkaline.
We have to find concentration of the acetic acid .
pH = 2. 68
pH = -㏒[ [tex]H^{+}[/tex] ]
2. 68 = -㏒[ [tex]H^{+}[/tex] ]
[ [tex]H^{+}[/tex] ] = [tex]10^{-2.68}[/tex]
[ [tex]H^{+}[/tex] ] = 2×[tex]10^{-3}[/tex]
To learn more about acetic acid please click here ,
brainly.com/question/15202177
#SPJ4
Which salt gives the most basic 0. 1 m solution in water?
a. nacl
b. nano2
c. nh4cl
d. nh4no2
The salt gives the most basic 0. 1 m solution in water is NaNo₂.
What is the base?Basic solutions are those solutions in which the concentration of OH- ion will always be greater as compared to the concentration of H+ ion in the solution.
If the solution is basic so after the dissociation, the formation of a strong base and a weak acid is a must in the solution.
NaNo₂ gets dissociated in water in the form of NaOH and HNO₂ and NaOH is a strong base whereas HNO₂ is a weak acid due to which the solution becomes acidic.
Therefore, salt gives the most basic 0. 1 m solution in water NaNo₂.
Learn more about the base, here:
https://brainly.com/question/15905763
#SPJ4
How can we increase the rate of collisions between the reactants in this reaction? mg 2hcl → mgcl2 h2
The frequency of collisions between the two reactants increases as the concentration of the reactants increases. When collisions happen, they don't always cause a reaction (atoms misaligned or insufficient energy, etc.). Higher concentrations result in more collisions and reaction opportunities.
Increasing a reactant's surface area increases the frequency of collisions and thus the reaction rate. The surface area of several smaller particles is greater than that of a single large particle. The greater the available surface area for particles to collide, the faster the reaction will occur.
How does concentration affect the rate of collisions between reactants?Thus, we can conclude that by increasing the concentration of Mg in the reaction mixture we increase the rate of collisions between the reactants in this reaction.
What does the half reaction of an oxidation-reduction reaction show?Iron gains electrons in the half reaction of an oxidation-reduction reaction. What does iron's electron gain mean? It has been reduced. Predict the product that will precipitate out of the reaction using the solubility rules and the periodic table.
Learn more about collisions of particles:
https://brainly.com/question/14897392
#SPJ4
If you purchase two new tires rather than four, you should put them on
If you purchase two new tires instead of four, you should put them on the rear means back side.
What should be done if you purchase only two tires?If you are here for a short answer on where the two new tires should be installed, always place the new tires on the rear when buying two tires instead of four. This is because more weight of car comes on the back tires so the new tires should be installed on the back tires of the car.
So we can conclude that If you purchase two new tires instead of four, you should put them on the rear means back side.
Learn more about tires here: https://brainly.com/question/27515656
#SPJ1
If the decomposition of a sample of k c l o 3 kclox3 produces 3. 29 g of o 2 ox2 , what was the mass (g) of the original sample?
The mass (g) of the original sample after decomposition is 8.3983 g.
A decomposition reaction can be described as a chemical reaction wherein one reactant breaks down into or extra merchandise.
explanation:
Reaction 2KClO₃ ⇒ 2KCl + 3O₂
moles 2 2 3
molar mass 122.55 74.55 32
Given, Mass of O₂ = 3.29g ⇒ moles of O₂
= (3.29/32) = 0.1028
3 moles of O₂ produced by 2 moles of KClO₃
Therefore, 0.1028 moles of O₂ produced by (2*0.1028/3) = 0.06853 moles of Kclo₃
Mass of KClo₃ in original sample is = moles * molar mass
= 0.06853 * 122.55
= 8.3983 g
A decomposition response occurs whilst one reactant breaks down into or extra merchandise. this may be represented through the general equation: XY → X+ Y. Examples of decomposition reactions consist of the breakdown of hydrogen peroxide to water and oxygen, and the breakdown of water to hydrogen and oxygen.
Learn more about decomposition here:-https://brainly.com/question/27300160
#SPJ4
500. ml of a solution containing 1. 5 m nh3(aq) is mixed with 500. ml of a solution containing 0. 50m of hcl(aq). what is the ph of the final solution? (kb(nh3) = 1. 8 x 10-5)
The pH of the solution is determined by the hydrogen ion concentration. The pH of the solution with 1.5 M ammonia and 0.50 M hydrochloric acid is 8.77.
What is pH?The potential of the hydrogen ion in the solution is called pH which determines the basicity and acidity of the solution.
Given,
The molar concentration of 500 mL ammonia = 1.5 M
The molar concentration of 500 mL hydrochloric acid = 0.50 M
Kb (NH₃) = 1. 8 x 10⁻⁵
First, pOH is calculated as,
pOH = pKb + log [NH₃][HCl]
= - log 1. 8 x 10⁻⁵ + log [1.5][0.50]
= - log 1. 8 x 10⁻⁵ + log [3]
= 4.744 + 0.477
= 5.221
Now, pH is calculated from pOH as,
pH = 14 - pOH
= 14 - 5.221
= 8.77
Therefore, 8.77 is the pH.
Learn more about pH here:
https://brainly.com/question/27184953
#SPJ4
A sample of n2 occupies 3. 0l at 3. 0atm. What volume will it occupy when the pressure is changed to 0. 5atm and the temperature remain constant?
It will occupy 18 L volume when the pressure is changed to 0. 5 atm and the temperature remain constant.
Calculation,
According to Boyle law, the pressure of a given quantity of gas varies inversely with its volume at constant temperature.
[tex]P_{1} V _{1} = k[/tex] .....(i)
[tex]P_{1}[/tex] is initial pressure = 3 atm[tex]V _{1}[/tex] is initial volume = 3Lk is constant[tex]P_{2} V _{2} = k[/tex] (ii)
[tex]P_{2}[/tex] is final pressure = ?[tex]V _{2}[/tex] is final volume = 0.5atmk is constantCombining equation (i) and (ii). we get,
[tex]P_{1} V _{1} = P_{2} V _{2}[/tex]
3 atm× 3L= [tex]V _{2}[/tex]× 0.5atm
[tex]V _{2}[/tex] = 3 atm× 3L/0.5atm = 18 L
Boyle law used during respiration or breathing.
To Learn more about Boyle law
https://brainly.com/question/1437490
#SPJ4
Which reactant is limiting if you begin with 9. 50 grams of al and 9. 50 grams of o2?
The reactant [tex]O_{2}[/tex] is limiting if we begin with 9. 50 grams of al and 9. 50 grams of [tex]O_{2}[/tex] .
The reactant whose number of moles is present in less quantity is called limiting reactant .
Calculation,
Given mass of Aluminium and oxygen
Mass of Aluminium = 9. 50 grams
and Mass of oxygen = 9. 50 grams
Number of moles of aluminium = given mass / molar mass of aluminium
Number of moles of aluminium = 9. 50 grams/ 26.99 = 0.351 mole
Number of moles of oxygen = given mass / molar mass of oxygen
Number of moles of oxygen = 9. 50 grams/ 31.999 = 0.296 mole
The reactant [tex]O_{2}[/tex] is limiting because oxygen present in less quantity or in limiting quantity and consume rapidly.
Therefor , the reactant [tex]O_{2}[/tex] is limiting if we begin with 9. 50 grams of al and 9. 50 grams of [tex]O_{2}[/tex] .
To learn more about limiting reactant please click here
https://brainly.com/question/14225536
#SPJ4
what is the percent abundance of the size 4d nails in this sample. PLS ASAP
Answer:
? = 61.5%
Explanation:
To find the percent abundance of 4d nails, you need to use the following equation:
Percent Abundance = (number of nails / total nails) x 100%
Percent Abundance (4d) = (123 / 123 + 77) x 100%
= (123 / 200) x 100%
= 0.615 x 100%
= 61.5%
Consider the reaction in the lead-acid cell pb(s) pbo2(s) 2 h2so4(aq) 2 pbso4(aq) 2 h2o(l) for which e°cell = 2. 04 v at 298 k. δg° for this reaction is:________
δg° for the reaction having e° cell = 2.04v. is 393.658kJ.
The lead (Pb) in the lead storage battery act as an anode
What is Voltaic Cell?A voltaic cell or galvanic cell is an electrochemical cell that uses chemical reactions to produce electrical energy.
Parts of voltaic cellAnode where oxidation occurs Cathode where reduction occurs.
Therefore, Pb acts as anode and PbO2 act as a cathode.
Given,
E° cell = 2.04v
Faraday constant= 96485 C/mol
Moles of electron transferred n= 2
∆G = -nFE°
= -2 × 96485 × 2.04
= 393.658kJ
Thus we concluded that the δg° for the reaction having e° cell = 2.04v. is 393.658kJ.
learn more about voltaic cell :
https://brainly.com/question/1370699
#SPJ4
The normal boiling point of fingernail polish remover is 56℃. what is the vapor pressure of fingernail polish remover at the salon, which is kept at a temperature of 22℃ for the comfort of customers?
The normal boiling point of fingernail polish remover is 56℃ the vapor pressure of fingernail polish remover at the salon 0.027 atmospheric pressure
What is atmospheric pressure?The pressure exerted by the vapors due to the atmosphere as it is surrounded by it only is known as vapor pressure and its unit is atm.
As air have small molecules which forms multiple layers and create pressure.
vapor pressure = {1/T1 - 1/T2}
T1 = 56 c
T2 = 22 c
substituting the values,
vapor pressure = [ 1/ 56 - 1 / 22 ]
= 0.027 atm.
Therefore, the vapor pressure of nail paint remover is 0.027 atm
Learn more about vapor pressure , here:
https://brainly.com/question/8696772
#SPJ4
The O2 molecule breaks apart at lower wavelengths than the O3 molecule. What is the main reason for this?
The main reason for this is Average bond of O₂ is shorter and strong from O₃.
What is ozone?Ozone is a blue gas composed of three oxygen atoms bonded together.
It occurs naturally high up in the Earth's atmosphere, where it protects the surface from harmful ultraviolet (UV) rays,
UV radiation will dissociate ozone into an oxygen atom and an oxygen molecule.
Ozone molecules are tetrahedral so the bond angle is 109 degree the electrons in the double bond occupy more space that the non-bonding electron pair.
Oxygen has a small size that leads to smaller O-O bond length.
A lone pair of electrons on both the oxygen repel each other leading to weakening of O-O bond.
O3 has longer and weaker bonds than O2, whereas SO2 has shorter and stronger bonds than SO.
Molecular oxygen, O2, is photolyzed by light of 241 nm and has a bond energy of 498 kJ/mol.
The main reason for this is Average bond of O₂ is shorter and strong from O₃.
Learn more about ozone, Here:
https://brainly.com/question/27911475
#SPJ4
In the lewis structure of HCN. How many nonbonded (lone) electron pairs are present?
In lewis structure of HCN, we can observe one lone pair of electron.
The 7 protons in the nitrogen nucleus are balanced by the 3 electrons from the triple bond, the 2 electrons from its lone pair, and the 2 inner core electrons that make up the nitrogen nucleus. As a result, nitrogen is formally neutral.What is meant by lewis structure?The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure. It is used to demonstrate how the electrons in a molecule are positioned around particular atoms. Electrons are shown as "dots" or, in the case of a bond, as a line connecting the two atoms.How should a Lewis structure be written?Step 1: Finding the total amount of valence electrons.Step 2: Outline the molecule's skeletal structure. Step 3: Form each bond in the skeletal structure using two valence electrons. Step 4: Try to distribute the leftover valence electrons as nonbonding electrons in order to fill the atoms' octets.To learn more about lewis structure visit:
https://brainly.com/question/20300458
#SPJ4
How many milliliters of an 16m (h2so4) solution is required to prepare 2. 0×10^3ml of 0. 15m solution?
18mL of a 16M H₂SO₄ solution is required to prepare.
Dilution is the process of lowering a solute's concentration in a solution. It usually just involves mixing the solution with more solvent, and much more water. A solution is diluted when more solvent is added without increasing solute. The final mixture is thoroughly mixed to make sure that every component is the same.
The formula for the dilution of a solution is
M₁V₁ = M₂V₂
where,
M is molarity and V is the volume of the solution in liters.
Known,
M₁ = 16M = 16 mol/ L
M₂ = 0.15M = 0.15 mol / L
V₂ = 2.0 × [tex]10^3[/tex] ml
= 2L
∴ [tex]V_1 =\frac{M_2 V_2}{M_1}[/tex]
[tex]V_1 = \frac{0.15 * 2}{16}[/tex]
[tex]= \frac{0.3}{16}[/tex]
[tex]= 0.018 L[/tex]
[tex]V_1 = 0.018L[/tex] × [tex]1000 mL[/tex]
[tex]= 18 mL[/tex]
Therefore, 18mL of a 16M H₂SO₄ solution is required to prepare.
Learn more about dilution here:
https://brainly.com/question/11493179
#SPJ4
What is the process that involves the breaking of intermolecular forces that hold an enzyme into the ordered three dimensional shape?
The process that involves the breaking of intermolecular forces that hold an enzyme is known as denaturation.
What are enzymes?
A substance produced by a living organism which acts as a catalyst to bring about a specific biochemical reaction.Almost all enzymes are proteins. There are some nucleic acids that behave like enzymes. These are called ribozymes. An enzyme like any protein has a primary structure, i.e., amino acid sequence of the protein. An enzyme like any protein has the secondary and the tertiary structure. A tertiary structure that contains the backbone of the protein chain folds upon itself, the chain criss-crosses itself and hence, many crevices or pockets are made. One such pocket is the ‘active site’. An active site of an enzyme is a crevice or pocket into which the substrate fits. Thus enzymes, through their active site, catalyse reactions at a high rate.To learn more about enzymes: https://brainly.com/question/1996362
#SPJ4
What is the relationship between cubic centimetres and millimetres
Answer:
1 cc always equals 1 mL.
Explanation:
The primary difference is that milliliters are used for fluid amounts while cubic centimeters are used for solids. No matter what is being measured.
Hope this helps you
Please mark as brainliest
A gas mixture contains ar and h2. what is the total pressure of the mixture, if the mole fraction of h2 is 0. 350 atm and the pressure of h2 is 0. 480 atm?
Considering the Dalton's partial pressure, the total pressure in the mixture of gases is 1.371 atm.
The pressure exerted by a particular gas in a mixture is known as its partial pressure.
So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T}[/tex] = [tex]P_{1}+P_{2}+......+P_{n}[/tex]
where n is the amount of gases in the mixture.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
[tex]P_{A}[/tex] = [tex]X_{a}P_{T}[/tex]
In this case, the partial pressure of gas H₂ can be expressed as:
[tex]P_{H2}[/tex] = [tex]X_{H2} P_{T}[/tex]
You know:
[tex]P_{H2}[/tex] = 0.48 atm
[tex]X_{H2}[/tex] = 0.35
Replacing in the definition of partial pressure of gas H₂:
[tex]0.48atm = 0.35P_{T}[/tex]
Solving:
[tex]P_{T}[/tex] = [tex]\frac{0.48atm}{0.35}[/tex]
[tex]P_{T}[/tex]= 1.371 atm
In summary, the total pressure in the mixture of gases is 1.371 atm.
Learn more about partial pressure: https://brainly.com/question/15302032
#SPJ4
Thermite is a compound often used in the metalworking and construction industries. thermite can be produced from aluminum and iron oxide according to this reaction:_______.
thermite can be produced from aluminum and iron oxide according to redox reaction.
Redox reaction is defined as the the reaction in which one substance get oxidised and other one is reduced. In other words, Oxidation reduction reaction is called redox reaction.
Oxidation is termed as gain of electron and Reduction is termed as lose of electron.
Thermite is a mixture of an oxide of one metal and a powder of another metal.
Aluminium is usually used as a metal that basically decreases the oxide of the metal.
The thermite contains a mass ratio of ferric oxide and aluminium of 3:1.
It is used to weld broken iron pieces thermally. The reduction of aluminium ferric oxide is extremely exothermic, so the iron produced would be in the molten state.
Fe2O3+2Al→Al2O3+2Fe+heat
Thus, redox reaction of aluminum and ferrous oxide produce thermite.
learn more about redox reaction:
https://brainly.com/question/27734388
#SPJ4