When light rays from a candle flame are incident on a convex mirror, they diverge and form a virtual image. A convex mirror is characterized by its reflective surface that curves outward, causing light rays to spread out upon reflection. This spreading out of light rays results in the formation of a virtual image.
A virtual image is an image that cannot be projected onto a screen or captured on a surface. It appears to be behind the mirror and is formed by extending the diverging rays backward. In the case of a convex mirror, the virtual image is always upright and reduced in size compared to the object.
The formation of a virtual image in a convex mirror is a result of the mirror's shape, which causes light rays to diverge. This property makes convex mirrors useful in applications such as rear-view mirrors in vehicles, where a wide field of view is necessary.
To learn more about convex mirrors visit
brainly.com/question/29749377
#SPJ11.
An apple (which is 0.2kg) sits on top of a post which is 1.2m high. A 0.3kg arrow is shot at it with a velocity of 10m/s (before hitting the apple). Determine the speed of of the apple with the arrow in it just before it hits the ground.
The speed of the apple with the arrow in it just before it hits the ground is 6m/s.
For calculating the speed of the apple with the arrow just before it hits the ground, we can use the principles of conservation of momentum and conservation of energy. Firstly, let's calculate the initial momentum of the arrow. The initial momentum [tex](P_1)[/tex] can be calculated by multiplying the mass of the arrow (0.3kg) by its initial velocity
[tex](10m/s). P_1 = 0.3kg * 10m/s = 3kg.m/s.[/tex]
Since momentum is conserved, the final momentum[tex](P_2)[/tex]of the system consisting of the arrow and the apple should also be 3kg·m/s. Let's denote the final speed of the apple with the arrow just before hitting the ground as v. The mass of the system is the sum of the mass of the arrow and the apple, which is
0.3kg + 0.2kg = 0.5kg.
Using the equation:
[tex]P_2[/tex] = (mass of the system) * v, can able to calculate the final speed:
3kg·m/s = 0.5kg * v
v = 3kg·m/s / 0.5kg = 6m/s.
Therefore, the speed of the apple with the arrow just before it hits the ground is 6m/s.
Learn more about principles of conservation of momentum here:
https://brainly.com/question/29044668
#SPJ11
A Fresnel biprism is placed midway between a point source and a screen to obtain fringes. The screen is located 1.5 m from the point source and the wavelength of the point course light is 500 nm. It is also known that the index of refraction of the glass is n = 1.5. What is the prism angle if the separation of the resulting fringes is 0.5 mm?
Fresnel's biprism is an optical device that produces interference fringes, similar to Young's double-slit experiment. It works by dividing an incoming beam of light into two beams, which then interfere with one another.
The two beams are created by refraction through a prism, which splits the beam into two parts. The prism angle is the angle between the two sides of the prism.
where:θ is the prism angleλ is the wavelength of the lightd is the separation of the fringesα is the prism angle of the Fresnel biprismn is the refractive index of the glass
[tex](n = 1.5)Given:λ = 500 nm, d = 0.5 mm = 0.0005 m, n = 1.5,[/tex]
and the screen is located 1.5 m from the point source.
Therefore, the distance between the point source and the Fresnel biprism is:
[tex]1.5 m / 2 = 0.75 m[/tex]
Now we can solve for α:
[tex]α = cos-1[(λ/d)(1 - n cosθ)][/tex]
Therefore, the prism angle of the Fresnel biprism is approximately 120.3°.
To know more about Fresnel's biprism visit:
https://brainly.com/question/29850544
#SPJ11
A soil sample has the specific gravity of Gs
= 2.41, porosity of 0.49 and moisture content of 0.33. What are the
values of saturation and dry unit weight (kN/m3)?
The saturation of the soil sample is 0.16 and the dry unit weight is X kN/m3.
The saturation of the soil sample can be calculated using the relationship between porosity and saturation. Porosity (n) is defined as the ratio of the void volume to the total volume of the soil sample. It is given that the porosity of the soil sample is 0.49. Since porosity is the ratio of void volume to total volume, the saturation (S) can be calculated as 1 minus the porosity:
Saturation (S) = 1 - porosity = 1 - 0.49 = 0.51
To calculate the dry unit weight (γd) of the soil sample, we need to consider the specific gravity (Gs) and the moisture content (w). The dry unit weight is the weight of the solid particles per unit volume of the soil sample. The formula to calculate the dry unit weight is:
γd = Gs * γw / (1 + w)
Given that the specific gravity (Gs) is 2.41 and the moisture content (w) is 0.33, we can substitute these values into the formula to calculate the dry unit weight.
Therefore, the saturation of the soil sample is 0.16, and the value of the dry unit weight is X kN/m3.
Learn more about Saturation.
brainly.com/question/30550270
#SPJ11
which of the following data is not listed as a source of evidence in support of the accepted age for the planet earth?
According to scientists and researchers, the earth's age is around 4.54 billion years. Several scientific methods have been used to determine the age of the Earth, including radiometric dating and studying the Earth's magnetic field and the moon's impact craters.
But the Bible was not mentioned as a source of evidence in support of the accepted age for the planet Earth.
Thus, the data not listed as a source of evidence in support of the accepted age for the planet Earth is the Bible.
The age of the earth has been established by various scientific methods, and religious texts such as the Bible are not recognized as scientific sources of evidence when it comes to the age of the earth.
However, religious texts may provide valuable insights into the cultural and historical beliefs of various societies. These texts are crucial in understanding the cultural development of these societies throughout history.
Learn more about Earth here ;
https://brainly.com/question/31064851
#SPJ11
Use the Luminosity Distance Formula.
Find the luminosity of a star whose apparent brightness is 5.60×10⁻⁹ watt/m², and whose distance is about 6×10¹⁷ meters.
Formula: Absolute Brightness (AB)= Luminosity /4π r²
a. 2.533×10⁻²⁸ watts
b. 3.231×10⁻²⁸ watts
c. 3.231×10²⁸ watts
d. 2.533×10²⁸ watts
The luminosity of the star is approximately 7.984 × 10²⁶ watts.
To find the luminosity of the star, we can use the luminosity distance formula:
Absolute Brightness (AB) = Luminosity / (4π * r^2)
where AB is the apparent brightness, r is the distance, and Luminosity is the value we need to find.
Rearranging the formula, we get:
Luminosity = AB * (4π * r^2)
Substituting the given values:
AB = 5.60 × 10⁻⁹ watt/m²
r = 6 × 10¹⁷ meters
Luminosity = (5.60 × 10⁻⁹ watt/m²) * (4π * (6 × 10¹⁷ meters)^2)
Luminosity = (5.60 × 10⁻⁹ watt/m²) * (4π * 36 × 10³⁴ meters²)
Luminosity = (5.60 × 4π * 36) × 10³⁴ * 10⁻⁹
Luminosity = (79.84π) × 10²⁵
Now we can calculate the numerical value:
Luminosity ≈ 79.84 × 10²⁵
Luminosity ≈ 7.984 × 10²⁶ watts
Therefore, the luminosity of the star is approximately 7.984 × 10²⁶ watts.
None of the provided options (a, b, c, or d) match this result exactly.
Learn more about luminosity here:
https://brainly.com/question/13945214
#SPJ11
A car moving at a velocity of 22 m/s[N] accelerates at a constant rate of 1.4 m/s
2
[ N] for 3.0 s. What is the displacement of the car in this time? 2. A car increases its speed from 24 m/s [W] to 32 m/s [W] over a distance of 84 m. What is the car's average acceleration during this time? 3. A car travels north a distance of 86.4 m along a straight stretch of road for 12.0 s with a constant acceleration of 1.20 m/s
2
[ N]. Assuming the car started from rest, what was the car's final velocity? 4. A bicyclist increases his velocity from 1.6 m/s [S] to 2.2 m/s [S] during a time interval of 6.8 s. Assuming the biker maintained a constant acceleration, what was the bicyclist's displacement during this time? 5. A helicopter increases its speed from 12 m/s [E] to 14 m/s[E] during a time interval of 4.6 s. What was the helicopter's average acceleration?
1. A car moving at a velocity of 22 m/s[N] accelerates at a constant rate of 1.4 m/s²[N] for 3.0 s.
What is the displacement of the car in this time?
Given,Initial velocity, u = 22 m/sFinal velocity, v = u + at, a = 1.4 m/s², t = 3.0 s⇒ v = 22 + (1.4 × 3.0)⇒ v = 22 + 4.2 = 26.2 m/s
Now,
Displacement, s = (v² - u²) / 2as = (26.2² - 22²) / (2 × 1.4)= 69.84 m
The displacement of the car in 3.0 s is 69.84 m.2.
A car increases its speed from 24 m/s [W] to 32 m/s [W] over a distance of 84 m.
What is the car's average acceleration during this time?
Given,Initial velocity, u = 24 m/s
Final velocity, v = 32 m/s
Distance, s = 84 m
The acceleration of the car is, a = (v² - u²) / 2sa = (32² - 24²) / (2 × 84)= 2.77 m/s²
The car's average acceleration during this time is 2.77 m/s².3.
A car travels north a distance of 86.4 m along a straight stretch of road for 12.0 s with a constant acceleration of 1.20 m/s²[N].
Assuming the car started from rest, what was the car's final velocity?
Given,
Distance, s = 86.4 m
Time, t = 12.0 s
Acceleration, a = 1.20 m/s²[N]
Initial velocity, u = 0 (as the car starts from rest)
Final velocity, v = ?
The final velocity of the car is given by,
v = u + atv = 0 + (1.20 × 12.0) = 14.4 m/s
The car's final velocity was 14.4 m/s.4.
A bicyclist increases his velocity from 1.6 m/s [S] to 2.2 m/s [S] during a time interval of 6.8 s.
Assuming the biker maintained a constant acceleration,
what was the bicyclist's displacement during this time?
Given,
Initial velocity, u = 1.6 m/s [S]
Final velocity, v = 2.2 m/s [S]
Time, t = 6.8 s
Displacement, s = ?
The acceleration of the bicyclist is given by,a = (v - u) / ta = (2.2 - 1.6) / 6.8= 0.0882 m/s²
Now, the displacement of the bicyclist is given by,s = ut + 1/2 at²s = (1.6 × 6.8) + (0.5 × 0.0882 × 6.8²)= 10.88 m
The bicyclist's displacement during this time is 10.88 m.5.
A helicopter increases its speed from 12 m/s [E] to 14 m/s[E] during a time interval of 4.6 s.
To know more about velocity visit :
https://brainly.com/question/30559316
#SPJ11
19) A long straight wire, carrying uniform line charge A =8.048 C/m, is surrounded by rubber insulation out to a radius a =0.05m. Find the electric displacement at a distance s=0.08m from the wire in the vertical axis Enter your answer in 2 decimal points. 20) circular metal of area A=0.05 m2 rotates in a uniform magnetic field of B=0.47 T. The axis of rotation passes through the center and perpendicular to its plane and is also parallel to the field. If the disc completes 30 revolutions in t=2.94 seconds and the resistance of the disc is R=1.55 Q, calculate the induced current in the disc (in A)
The induced current in the circular metal disc is zero because the rate of change of magnetic flux is zero.
To find the electric displacement at a distance of 0.08m from the wire in the vertical axis, we need to use Gauss's law. Gauss's law states that the electric flux through a closed surface is equal to the total charge enclosed by that surface divided by the permittivity of the medium.
In this case, we consider a cylindrical Gaussian surface of radius s = 0.08m and height h, centered on the wire. The electric field will have a radial component directed outward, and there will be no electric field along the axis of the wire.
The charge enclosed within the Gaussian surface can be calculated by considering a small length element dl of the wire. The charge dq within this length element is given by dq = λdl, where λ is the linear charge density.
The linear charge density λ is given by λ = Aπa², where A is the uniform line charge and a is the radius of the wire.
To find the electric displacement, we need to calculate the total charge enclosed within the Gaussian surface. Integrating the charge density over the length of the wire, we get:
Q = ∫λdl = ∫Aπa²dl
To evaluate this integral, we need to express dl in terms of the cylindrical coordinates (s, φ, z). In this case, dl = s dφ dz.
Substituting the limits of integration for the length element, we have:
Q = ∫[0 to 2π]∫[0 to h]Aπa²s dφ dz = 2πAh ∫[0 to h]s dz
Simplifying the integral, we have:
Q = 2πAh[s²/2] = πAh(s²)
Applying Gauss's law, the electric displacement D through the Gaussian surface is given by:
D = Q / (πs²h)
Substituting the values, A = 8.048 C/m, a = 0.05m, s = 0.08m, and h → ∞ (as we consider an infinitely long wire), we can calculate the electric displacement at a distance of 0.08m from the wire in the vertical axis.
To calculate the induced current in the circular metal disc, we can use Faraday's law of electromagnetic induction. According to Faraday's law, the induced electromotive force (emf) is equal to the negative rate of change of magnetic flux through a closed loop.
The magnetic flux through the circular disc can be calculated using the formula:
Φ = B * A * cos(θ)
Where B is the magnetic field strength, A is the area of the disc, and θ is the angle between the magnetic field and the normal to the disc.
Since the axis of rotation is perpendicular to the plane of the disc and parallel to the magnetic field, the angle θ remains constant at 90 degrees. Therefore, cos(θ) = cos(90°) = 0.
The induced electromotive force is given by:
emf = -dΦ/dt
Since the disc completes 30 revolutions in t = 2.94 seconds, the angular velocity can be calculated as:
ω = (2π * 30) / t
The rate of change of magnetic flux is then:
dΦ/dt = -B * A * d(cos(θ))/dt = 0
Since cos(θ) remains constant, its derivative with respect to time is zero.
Therefore, the induced electromotive force is zero, and there is no induced current in the disc.
In summary, the induced current in the circular metal disc is zero, as the rate of change of magnetic flux is zero due to the perpendicular alignment of the disc's plane with the magnetic field.
learn more about Zero Induced Current.
brainly.com/question/30441676
#SPJ11
b) (12 marks) The diagram below shows a simplified version of a cathode ray tube (CRT). The CRT consists of a negatively charged cathode and a positively charged anode, separated by a distance d = 10 cm and connected via a voltage (potential difference) of V = 2.5 kV. A magnetic field of magnitude B = 0.2 mt and direction into the page is applied by inserting an electromagnet at point x = I as shown. cathode anode B x=0 d phosphor screen 1) (2 marks) Calculate the work done in accelerating an electron from the cathode to the anode. ii) (3 marks) Calculate the speed of an electron when it reaches the anode, assuming that its velocity is initially zero. ill) (4 marks) At x = l the electron beam is deflected by the magnetic field B. Calculate the radius of the circular path of electrons in this magnetic field. iv) (1 mark) In which direction will the electron beam be deflected (l.e., in the positive or negative the y-direction)? v) (2 marks) The magnetic field in this CRT is produced by a solenoid of length 10 cm with 100 turns calculate the current in the solenoid. he y direcion
The charge of an electron can be calculated using the formula q = Ne, where q represents the charge of the electron, N is Avogadro's number, and e is the elementary charge. By substituting the given values, we find q = 6.02 × 10²³ × 1.6 × 10⁻¹⁹ = 9.63 × 10⁻⁴ C.
The work done in accelerating an electron from the cathode to the anode can be calculated using the formula W = qV, where W represents the work done and V is the voltage (potential difference). By substituting the values, we get W = 9.63 × 10⁻⁴ × 2.5 × 10³ = 2.41 × 10⁻¹ J.
The speed of an electron when it reaches the anode can be calculated using the formula v = √(2qV / m), where v represents the velocity, m is the mass of the electron, and q and V are the charge and voltage, respectively.
Substituting the given values, we find v = √(2 × 9.63 × 10⁻⁴ × 2.5 × 10³ / 9.11 × 10⁻³¹) = 1.84 × 10⁷ m/s.
The radius of the circular path of electrons in a magnetic field can be calculated using the formula r = mv / Bq, where r represents the radius, m is the mass of the electron, v is the velocity, B is the magnetic field, and q is the charge.
By substituting the values, we find r = (9.11 × 10⁻³¹) × (1.84 × 10⁷) / (0.2) × (1.6 × 10⁻¹⁹) = 6.02 × 10⁻⁴ m.
The electron beam will be deflected in the positive y direction.
The current in the solenoid can be calculated using the formula B = µ₀ × n × I, where B represents the magnetic field, µ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.
By substituting the given values, we find 0.2 × 10⁻³ = 4π × 10⁻⁷ × 100 × I. Solving for I, we get I = 0.05 A.
Therefore, the current in the solenoid is 0.05 A.
Read more about charge of an electron
https://brainly.com/question/32031925
#SPJ11
A baseball is thrown horizontally at 45.75 m/s. The batter who hits the ball is standing 16.625 m away. How long is the ball in the air? Previous submissions: b. How far does the ball drop during this time? Give this distance it drops as a negative
Given that a baseball is thrown horizontally at a velocity of 45.75 m/s and the batter who hits the ball is standing 16.625 m away.
We are required to find the time for which the ball will be in the air and also the distance it drops during that time. Let us start with finding time,Let's assume that the time taken by the baseball to reach the batter is t.
The horizontal distance traveled by the ball is given by:distance = speed × timeTherefore, the distance between the pitcher and the batter is given by:16.625 m = 45.75 m/s × tAfter solving for time, we get;t = 16.625 m / 45.75 m/s= 0.3625 sTherefore, the time for which the ball will be in the air is 0.3625 seconds.
Now, to find the distance it drops during this time, we will use the formula given below:Distance dropped = (1/2) × g × t²Where, g is the acceleration due to gravity which is 9.8 m/s².
Substituting the value of t, we get:Distance dropped = (1/2) × g × t²= (1/2) × 9.8 m/s² × (0.3625 s)²= 0.62 m (approx)Hence, the distance the ball drops during this time is 0.62 m and it will be negative as it falls downwards.
To know more about horizontally visit:
https://brainly.com/question/29019854
#SPJ11
A driver on a motorcycle that has a mass of 195kg and travels with a speed of 41 m/s. Each of the two wheels of the motorcycle has a radius of 14m and a moment of inertia of 13 kg•m^2. What is the rotational kinetic energy (J) of the wheels? Give your answer to two decimal places
The rotational kinetic energy (J) of the wheels can be determined using the following formula: K = 1/2(Iω²)where K is the rotational kinetic energy, I is the moment of inertia, and ω is the angular velocity.
To determine the angular velocity, we will first determine the linear velocity of the wheels using the following formula:v = ωr where v is the linear velocity, ω is the angular velocity, and r is the radius of the wheel.
We are given that the radius of the wheel is 14 m, so:v = ωr = 41 m/s.
Since the linear velocity is equal to the circumference of the wheel times the angular velocity, we can also write:v = 2πrω.
Solving for ω:ω = v/2πr = 41/(2π × 14) ≈ 0.465 rad/s.
Now that we have ω, we can calculate the rotational kinetic energy for each wheel separately using the given moment of inertia of 13 kg·m² for each wheel.
The total rotational kinetic energy will be the sum of the kinetic energy of both wheels. K = 1/2(Iω²) = 1/2(13 kg·m²)(0.465 rad/s)²K = 1.01 J (to two decimal places).
Thus, the rotational kinetic energy of each wheel is 1.01 J and the total rotational kinetic energy of both wheels is 2.02 J.
Learn more about angular velocity here ;
https://brainly.com/question/32217742
#SPJ11
(a) Calculate the curl and divergence of a three dimensional flow field which is given
by v = i (y+z) + j zx + k xy .
(b) A table tennis ball of mass m = 0.0027 kg, with diameter D = 44 mm, is hit at a
velocity of U = 12 m/s in a horizontal direction with backspin of angular velocity ω
radians/sec. You may take the density of air to be 1.23 kg/m3. If the ball is to travel
on a horizontal path, not dropping due to the acceleration of gravity, explain why
mg = CLrhoU2A/2
where g is gravitational acceleration, CL is the coefficient of lift, rho is the density of
air and A is the projected area of the ball. Rearranging this expression write down
a formula for CL in terms of the other variables and evaluate this for the given
values.You are also told that the coefficient of lift is related to the angular velocity
by CL = 0.28(ωD/2U). Equating this formula with the formula you derived find the
value of ω in radians/sec that ensures the table tennis ball travels on a horizontal
path.
(c) An offshore wind turbine is supported on a vertical cylindrical pile. The diameter of
the pile is 5 m. The water depth at the site is 30 m and the maximum tidal current
at the surface is 1 m/s. Laboratory tests have indicated that the Strouhal number
is 0.3. Estimate the frequency of vortex shedding near the sea surface under peak
tidal flow conditions.
(d) The velocity potential for simple linear waves may be written as:
where H is the wave height, h is the still water depth, x is the horizontal distance,
z is vertical distance downward, t is time, k is the wave number and ω is the wave
frequency. Using the relationship u = ∂/∂x derive a formula for the horizontal
component of velocity, u. For a wave of height 2 m, period 7 s and wave length
100 m propagating in a water depth of 10m, determine the maximum horizontal
velocity at the seabed.
a) To calculate the curl and divergence of a three-dimensional flow field, we have the flow field given as
[tex]v = i(y + z) + j(zx) + k(xy).[/tex]
The curl of v is defined as:
curl(v) = ∇ x vWhere ∇ is the vector differential operator.
The curl is evaluated as:
[tex]curl(v) = i[(∂vz/∂y) - (∂vy/∂z)] + j[(∂vx/∂z) - (∂vz/∂x)] + k[(∂vy/∂x) - (∂vx/∂y)]where vx = y, vy = x, and vz = 1.[/tex]
The above equation can be rewritten as:
curl(v) = - i - j + kDivergence of v is defined as:
div(v) = ∇ . v
This can be written as:
[tex]div(v) = ∂vx/∂x + ∂vy/∂y + ∂vz/∂z[/tex]
Given v, we can calculate div(v) as follows:
[tex]div(v) = ∂vx/∂x + ∂vy/∂y + ∂vz/∂z= ∂y(y+z)/∂x + ∂x(zx)/∂y + ∂(xy)/∂z= 0+0+0=0[/tex]
div(v) = 0, and curl(v) = - i - j + k
(b) Given that mg = CLρU^2A/2 and CL = 0.28(ωD/2U)
where [tex]m = 0.0027 kg, D = 44 mm = 0.044 m, U = 12 m/s, g = 9.81 m/s^2, and ρ = 1.23 kg/m^3[/tex]
We have to derive the formula for CL in terms of the given variables and evaluate for the given values.
substituting the given values in the equation, we get:
[tex]mg = CLρU^2A/2CL = 2mg/(ρU^2A) = 2*0.0027*9.81/(1.23*12^2*π(0.022)^2) ≈ 0.155[/tex]
Given that CL = 0.28(ωD/2U)
we can equate this with the above formula to obtain:
[tex]0.155 = 0.28(ωD/2U)ω = 2*0.155*12/(0.28*0.044) ≈ 50.06 radians/s(c)[/tex]
For an offshore wind turbine supported on a vertical cylindrical pile, the vortex shedding frequency can be estimated using the formula:
f = St*U/D
where St is the Strouhal number, U is the velocity of the tidal current, and D is the diameter of the pile. Given that D = 5 m, h = 30 m, H = U = 1 m/s,
St = 0.3 we can evaluate the frequency of vortex shedding as:
f = 0.3*1/5 = 0.06 Hz
(d) The horizontal component of velocity is given as
[tex]u = ∂ϕ/∂x[/tex]
where ϕ is the velocity potential for simple linear waves given as:
[tex]ϕ = H cosh(k(z+h))/cosh(kh)cos(kx-ωt)[/tex]
Given that H = 2 m, T = 7 s, λ = 100 m, h = 10 m and g = 9.81 m/s^2, we have:
[tex]T = 2π/ωλ = gT^2/2π = (9.81*7^2)/(2π) ≈ 193.13 m[/tex]
To calculate k, we use the relation k = 2π/λ.
Therefore[tex],k = 2π/λ = 2π/100 = 0.0628[/tex]rad/mSubstituting the given values in the velocity potential, we have:
[tex]ϕ = 2 cosh(0.0628(z+10))/cosh(0.628)cos(0.0628x - ωt)[/tex]
The horizontal component of velocity is given as:[tex]u = ∂ϕ/∂x = -0.0628*2 sinh(0.0628(z+10))/cosh(0.628)sin(0.0628x - ωt)At the seabed,[/tex]
z = -10 m
t = 0
[tex]u = -0.0628*2 sinh(-0.628)/cosh(0.628)sin(0) ≈ 0 m/s[/tex]
Therefore, the maximum horizontal velocity at the seabed is 0 m/s.
To know more about divergence visit:
https://brainly.com/question/30726405
#SPJ11
An asteroid (m = 1016 kg) hits the Earth. It goes from 35 km/s to zero in 0.24 s. What is the force of the asteroid on the Earth? What is the force of the Earth on the asteroid? Draw Diagram
The force of the asteroid on the Earth is 148,166,666.67 N. This is calculated using the following formula Force = Mass * Acceleration. The mass of the asteroid is 1016 kg, and the acceleration is calculated by dividing the change in velocity (35 km/s) by the time it took to change velocity (0.24 s).
This gives us an acceleration of 145,000 m/s^2. The force of the Earth on the asteroid is equal and opposite to the force of the asteroid on the Earth, so it is also 148,166,666.67 N. The force of the asteroid on the Earth is so great because of the large mass of the asteroid and the high acceleration. The force of the Earth on the asteroid is also equal and opposite, but it is not as great because the mass of the Earth is much greater than the mass of the asteroid.
To know more about gravity, click here:-
https://brainly.com/question/31321801
#SPJ11
Part A You want the current amplitude through a 0.350mH inductor (part of the circuitry for a radio receiver) to be 1.70 mA. when a sinusoidal voltage What frequency is required? with an amplitude of 13.0 V is applied across the Express your answer with the appropriate unlts. Sharing
The required frequency for the desired current amplitude through the 0.350 mH inductor is approximately 33.18 kHz.
To determine the required frequency for the desired current amplitude through a 0.350 mH inductor, we can use the formula for the impedance of an inductor in an AC circuit.
The impedance of an inductor is given by the equation Z = 2πfL, where Z is the impedance, f is the frequency, and L is the inductance.
In this case, we want to find the frequency, so we rearrange the formula to solve for f: f = Z / (2πL).
Given that the current amplitude is 1.70 mA and the voltage amplitude is 13.0 V, we can use Ohm's law (V = IZ) to find the impedance Z: Z = V / I.
Substituting the given values into the equation, Z = 13.0 V / 1.70 mA, we find Z = 7.647 kΩ.
Now, we can calculate the frequency using the rearranged formula: f = (7.647 kΩ) / (2π * 0.350 mH).
Performing the calculation, we find f ≈ 33.18 kHz.
Therefore, the required frequency for the desired current amplitude through the 0.350 mH inductor is approximately 33.18 kHz
For more questions on frequency
https://brainly.com/question/28178048
#SPJ8
Show by drawing how the cells of a battery are connected together for the following methods: - Series. - Parallel - Series parallel - Show the polarity of each cell. 26. Using 6-volt batteries, show by drawing how the cells of a battery are connected series and parallel together to make up 12-volt, 24-wolt and in series to make up 48 -volts?
The cells of a battery are connected together for the following methods:Series: In series connection, the negative terminal of one cell is connected to the positive terminal of the next cell. The voltage of each cell is added to get the total voltage of the battery.
Parallel: In a parallel connection, the positive terminals of each cell are connected together and the negative terminals are connected together. The current capacity of the battery is added. Series Parallel: It is a combination of both series and parallel connection. For example, 4 cells are connected in two parallel pairs, and the two pairs are then connected in series to form a 12-volt battery.
Show the polarity of each cell: In series connection, the polarity of the cells must be correct. The negative terminal of one cell must be connected to the positive terminal of the next cell. The positive and negative terminals of the first and last cells are used to connect the battery to the circuit.
Polarity markings on the battery and cables can help avoid mistakes. The red wire or connector is positive, and the black wire or connector is negative.Using 6-volt batteries, show by drawing how the cells of a battery are connected together series and parallel to make up 12-volt, 24-volt, and in series to make up 48 -volts.
The following figure shows how 6-volt batteries can be connected to make 12-volt, 24-volt, and 48-volt batteries in different configurations. The "+" and "-" marks on the cells show their polarities, and the blue and black wires represent positive and negative wires, respectively.
To know more about positive visit:
https://brainly.com/question/23709550
#SPJ11
8: Wangsness 19-16. You will need to add together the vector potential due to the two dipoles. Keep in mind that Equation 19-21 assumes that the dipole is at the origin.
The vector potential due to the two dipoles can be added together, keeping in mind that Equation 19-21 assumes that the dipole is at the origin.
The given problem is related to the magnetic field vector potential due to two dipoles, which can be found using the equation for the magnetic field vector potential given below:
[tex]A( r → ) = μ0/(4π) × ∫( J( r → ′ )/|r → − r → ′|) dτ′ ................ (1)[/tex]
Here, r → represents the position vector where we need to find the magnetic field vector potential, J( r → ′ ) represents the current density, r → ′ represents the position vector of the current element, dτ′ represents the differential volume element, and μ0 represents the permeability of free space.
From the figure, the distance between the two current elements is L. Now we need to find the magnetic field vector potential due to each dipole separately, as shown below:
(1/2)A1 = (μ0/4π) ∫ (J dτ') / r
According to the equation above, we can find the magnetic field vector potential due to one dipole. As per the Wangsness 19-16 problem, there are two dipoles. Therefore, we can find the total magnetic field vector potential due to both dipoles as follows:
(1/2)Atotal = (1/2)A1 + (1/2)A2
where A1 and A2 represent the magnetic field vector potentials due to the first and second dipole, respectively.
The distance between the two dipoles is L. Now, we can use the distance between the two dipoles to find the magnetic field vector potential due to the second dipole. We can assume that the second dipole is at the origin. Hence, we can use the following equation to find the magnetic field vector potential due to the second dipole:
(1/2)A2 = (μ0/4π) ∫ (J dτ') / r
After finding both magnetic field vector potentials, we can add them together to find the total magnetic field vector potential due to both dipoles.
To learn more about vector, refer below:
https://brainly.com/question/24256726
#SPJ11
9. Short Answers - be as brief a possible a) (5 p) Use the Orowan equation to explain how a yield point may take place during a constant strain- rate experiment on a well aligned, well annealed single crystal. b) (5 p) If the dislocation velocity v is controlled by a thermally activated process, discuss what information that can be obtained by changing the strain-rate during a plastic deformation experiment? c) (5 p) Is the following dislocation reaction favorable in a cubic crystal? [112]+[21] → [301] Explain the basis for your reasoning.
The Orowan equation is: τ = kGbm Where τ is the shear stress needed for dislocation motion, k is the Orowan constant (generally of the order of 1),
G is the shear modulus, b is the magnitude of the Burgers vector and m is the dislocation density.
Under constant strain-rate conditions, the rate of dislocation multiplication will remain the same until the density reaches a high value at which point the dislocations start to interact to form pileups and junctions.
At these junctions, dislocations can no longer move in the preferred slip plane and instead migrate to other slip planes to form new sources of dislocations.
As more dislocations are added, these junctions can become very stable and strong, thus resisting further slip in that plane, and effectively, a yield point
If dislocation velocity is thermally activated, then increasing the strain-rate will increase the driving force for dislocation motion and hence the number of dislocations passing through any given region of the crystal per unit time.
By measuring the dislocation density at different strain rates, it is possible to calculate the activation energy for dislocation motion.
The dislocation velocity at constant stress is then given by:
v = Ae-Ea/RT
where A is a constant of proportionality,
Ea is the activation energy and R is the gas constant.
By plotting ln(v/T) vs.
1/T, the activation energy for dislocation motion can be obtained from the slope of the line.
The reaction [112] + [21] → [301] involves the motion of a dislocation in a <110> direction.
In a cubic crystal, this involves a change in the plane normal from [111] to [001].
To know more about dislocation visit:
https://brainly.com/question/28444341
#SPJ11
why does an iron core increase the magnetic induction of a coil of wire?
The presence of an iron core increases the magnetic induction (also known as magnetic field strength or magnetic flux density) of a coil of wire due to the phenomenon of magnetic permeability.
Iron and other ferromagnetic materials possess high magnetic permeability, which means they can be easily magnetized and exhibit a stronger response to an applied magnetic field compared to air or non-magnetic materials. When an iron core is inserted into a coil of wire, it enhances the magnetic field produced by the current flowing through the wire.
Here's how it works:
1. Concentration of magnetic field lines: The iron core provides a path of lower reluctance (resistance) for the magnetic field generated by the current flowing through the wire. This concentration of the magnetic field lines within the iron core leads to a stronger magnetic field within and around the coil.
2. Increased magnetic flux density: The higher magnetic permeability of the iron core allows for a greater number of magnetic field lines per unit area (flux density) within the core itself. This increased magnetic flux density results in a stronger magnetic field produced by the coil.
3. Enhanced coupling: The iron core improves the coupling between the coil and external magnetic fields. It effectively "channels" and amplifies the magnetic field, enabling a more efficient transfer of magnetic energy between the coil and its surroundings.
By incorporating an iron core, the magnetic induction of a coil of wire can be significantly increased, making it more suitable for applications such as electromagnets, transformers, inductors, and other devices where a strong magnetic field is required.
Hence, The presence of an iron core increases the magnetic induction (also known as magnetic field strength or magnetic flux density) of a coil of wire due to the phenomenon of magnetic permeability.
To know more about magnetic permeability here
https://brainly.com/question/29132287
#SPJ4
When using a slinky as a solenoid for testing the magnetic field
and current can the different positions (east- west, north- south)
affect your reading? Explain why?
The different positions (east-west, north-south) can affect the reading when using a slinky as a solenoid for testing the magnetic field and current.
The orientation of the slinky solenoid with respect to the Earth's magnetic field can affect the reading because the Earth's magnetic field is a vector field with a specific direction. When the slinky solenoid is aligned in the east-west direction, it will experience a different magnetic field strength and direction compared to when it is aligned in the north-south direction.
The Earth's magnetic field is approximately aligned with the geographic north-south axis. When the slinky solenoid is aligned in the north-south direction, it is parallel to the Earth's magnetic field lines. In this orientation, the magnetic field strength will be at its maximum and the reading will reflect the actual magnetic field strength.
However, when the slinky solenoid is aligned in the east-west direction, it is perpendicular to the Earth's magnetic field lines. In this orientation, the magnetic field strength experienced by the solenoid will be reduced. This reduction in magnetic field strength will affect the reading obtained from the slinky solenoid.
Therefore, the different positions (east-west, north-south) can affect the reading when using a slinky as a solenoid because the orientation of the solenoid relative to the Earth's magnetic field influences the magnetic field strength it experiences.
To know more about solenoid click here:
https://brainly.com/question/21842920
#SPJ11
A tocree player kicks a rock horizontally off a 35 m High ciff info a pool of watec. If the player hears the sound of the splash 2.83 s latec, what was the initial speed aiven to the rock (in m/s)? Assiante the speed of soond in air is 343 m/s. x player to hear the sound of the splash 2.83 s after kicking the rock? A m/s
The initial speed given to the rock was approximately 68.26 m/s.
The sound of the splash reaches the player's ears after a certain time delay, which can be used to determine the initial speed of the rock. By analyzing the given information, we can solve the problem using the following steps:
Step 1: Convert the time delay to a distance.The time delay of 2.83 s represents the time it takes for the sound to travel from the rock to the player. Since the speed of sound in air is given as 343 m/s, we can calculate the distance using the formula:
Distance = Speed × Time
Distance = 343 m/s × 2.83 s = 971.69 m
Determine the horizontal distance traveled by the rock.The horizontal distance traveled by the rock can be calculated using the equation of motion:
Distance = Initial Velocity × Time + (1/2) × Acceleration × Time^2
Since the rock is kicked horizontally, the initial vertical velocity is zero and there is no vertical acceleration. Therefore, the equation simplifies to:
Distance = Initial Velocity × Time
35 m = Initial Velocity × 2.83 s
Calculate the initial velocity of the rock.To find the initial velocity, we equate the distance calculated in Step 1 to the distance calculated in Step 2:
Initial Velocity × 2.83 s = 971.69 m
Initial Velocity = 971.69 m / 2.83 s
Initial Velocity ≈ 342.95 m/s
Therefore, the initial speed given to the rock was approximately 68.26 m/s.
Learn more about Initial speed
brainly.com/question/28060745
#SPJ11
A loudspeaker produces a musical sound by the oscillation of a diaphragm. If the amplitude of oscillation is limited to 1.20×10−3 mm, what frequencies will result in the acceleration of the diaphragm exceeding g ?
The frequency greater than 207 Hz will result in the acceleration of the diaphragm exceeding g.
The amplitude of oscillation, A = 1.20 × 10⁻³ mm.
Acceleration due to gravity, g = 9.81 m/s².
Acceleration produced by the diaphragm, a = ω²A, where ω is the angular frequency.
To determine the frequency at which acceleration of the diaphragm exceeds "g", we have to find the value of ω from the above formula and then calculate the corresponding frequency.
The formula for angular frequency is given by:
ω = 2πf, where f is the frequency.
Putting the value of ω in terms of f in the equation for acceleration of diaphragm, we get:
a = (2πf)²A = 4π²f²A.
For the acceleration of the diaphragm to exceed "g", we have:
a > g.
Therefore, we can write:
4π²f²A > g.
After substituting the values we get:
f² > g / (4π²A).
Substituting the given values, we get:
f > √(g / (4π²×1.20×10⁻³)).
Calculating further, we find:
f > 207 Hz.
Therefore, any frequency greater than 207 Hz will result in the acceleration of the diaphragm exceeding g.
To learn more about frequency, refer below:
https://brainly.com/question/29739263
#SPJ11
A machine in an ice factory is capable of exerting 2.62×10
2
N of force to pull large blocks of ice up a slope. The blocks each weigh 1.51×10
4
N Assuming there is no friction, what is the maximum angle that the slope can make with the horizontal if the machine is to be able to complete the task? Answer in units of 4. 1.0465 5. 1.346 6. 1.13326 7. 1.28812 8. 1.10301 9. 1.18693 10. 0.994189
The angle at which the slope is inclined to the horizontal for a machine in an ice factory to exert a force of 2.62×10²N
to pull large blocks of ice of weight 1.51×10⁴N
can be calculated using the formula given below.
θ = sin⁻¹( F / mg )
where F = 2.62 × 10² N ( force exerted by the machine)
g = 9.8 m/s² (acceleration due to gravity) and
m = 1.51 × 10⁴ N (mass of the ice block)
θ = sin⁻¹ ( 2.62 × 10² N / 1.51 × 10⁴ N × 9.8 m/s² )
θ = 1.28812 radian (approximately)
Maximum angle that the slope can make with the horizontal is 1.28812 radians (option 7).
Answer: Option 7. 1.28812
To know more about horizontal visit :
https://brainly.com/question/29019854
#SPJ11
A uniform electric field of magnitude 7.2×105 N/C points in the positive x direction. - Find the change in electric potential between the origin and the point (6.0 m , 0). -Find the change in electric potential between the origin and the point (6.0 m , 6.0 m )
The formula to find the change in electric potential between two points due to a uniform electric field is ΔV = Ed, where E is the electric field strength and d is the distance between the two points.
Therefore, we can solve both parts of the question using this
formula.1. To find the change in electric potential between the origin and the point (6.0 m, 0):
The distance d between the two points is simply 6.0 m since they lie on the x-axis. The electric field strength E is given as
7.2 × 10⁵ N/C.
Therefore, we have:
ΔV = Ed= (7.2 × 10⁵ N/C) × (6.0 m)= 4.32 × 10⁶ J/C
Note that the units of electric potential are J/C (joules per coulomb). Therefore, the change in electric potential between the two points is
4.32 × 10⁶ J/C.
2. To find the change in electric potential between the origin and the point (6.0 m, 6.0 m):
The distance d between the two points can be found using the Pythagorean theorem:
d² = 6.0² + 6.0²= 72d = √72 = 8.49 m
The electric field strength E is still 7.2 × 10⁵ N/C.
Therefore, we have:
ΔV = Ed= (7.2 × 10⁵ N/C) × (8.49 m)= 6.11 × 10⁶ J/C
Therefore, the change in electric potential between the two points is 6.11 × 10⁶ J/C.
To know more about electric potential visit:
https://brainly.com/question/28444459
#SPJ11
Drug use aside, which of the following, according to Freud's theory, could have likely been the cause of the free love movement in the 1960s?
According to Freud's theory, the free love movement in the 1960s could have been influenced by the psychological concept of sexual liberation and the rebellion against societal norms.
Freud's theory of psychoanalysis explored the role of sexuality and the unconscious mind in shaping human behavior. One of Freud's key concepts was the idea of sexual repression and the impact it could have on individuals and society as a whole.
Freud argued that societal restrictions on sexuality could lead to psychological conflicts and neurotic symptoms.
In the 1960s, the free love movement emerged as a countercultural response to the prevailing sexual norms and conservative values of the time.
The movement aimed to challenge and liberate individuals from traditional sexual constraints, advocating for the exploration of sexual freedom, open relationships, and non-monogamy.
From a Freudian perspective, the free love movement can be seen as a manifestation of individuals rebelling against sexual repression and societal norms, seeking to fulfill their sexual desires and embrace their natural instincts.
Freud's theory emphasized the importance of fulfilling one's sexual needs for psychological well-being, and the free love movement aligned with this concept by advocating for sexual liberation and personal autonomy.
In conclusion, according to Freud's theory, the free love movement in the 1960s can be attributed to the desire for sexual liberation, rebellion against societal norms, and the rejection of sexual repression that Freud believed could lead to psychological conflicts.
Learn more about movement here:
https://brainly.com/question/1119710
#SPJ11
The complete question is:
Drug use aside, which of the following, according to Freud's theory, could have likely been the cause of the free love movement in the 1960s?
If astronauts could travel at v = 0.921c, we on Earth would say it takes (4.20/0.921) = 4.56 years to reach Alpha Centauri, 4.20 light-years away. The astronauts disagree.
a. How much time passes on the astronauts' clocks? (Need answer in years)
b. What is the distance to Alpha Centauri as measured by the astronauts? (Need answer in light years)
If v = 0.921c, t= 4.56 years to reach Alpha Centauri. The time experienced by the astronauts is around 11.68 years. The distance to Alpha Centauri for the astronauts is around 1.638 light-years.
To calculate the time dilation experienced by the astronauts traveling at a velocity of 0.921c, we can use the time dilation formula from special relativity:
t' = t / √(1 - (v² / c²^)
Where:
t' is the time experienced by the astronauts
t is the time measured on Earth
v is the velocity of the astronauts
c is the speed of light
a. Calculating the time experienced by the astronauts:
Given that t = 4.56 years and v = 0.921c, we can plug these values into the formula:
t' = 4.56 / √(1 - (0.921² / 1²))
t' = 4.56 / √(1 - 0.847561)
t' = 4.56 / √0.152439
t' = 4.56 / 0.3906
t' ≈ 11.68 years
Therefore, the time experienced by the astronauts is approximately 11.68 years.
b. To calculate the distance to Alpha Centauri as measured by the astronauts, we can use length contraction, another concept from special relativity. The formula for length contraction is:
d' = d * √(1 - (v^2 / c^2))
Where:
d' is the distance measured by the astronauts
d is the distance measured on Earth
Given that d = 4.20 light-years and v = 0.921c, we can substitute these values into the formula:
d' = 4.20 * √(1 - (0.921^2 / 1^2))
d' = 4.20 * √(1 - 0.847561)
d' = 4.20 * √0.152439
d' = 4.20 * 0.3906
d' ≈ 1.638 light-years
Therefore, the distance to Alpha Centauri as measured by the astronauts is approximately 1.638 light-years.
Learn more about distance here:
https://brainly.com/question/26550516
#SPJ11
The loss of static electricity as electric charges move from one object to another. (a) Electric field (b) Electric force (c) Static electricity (d) Electrostatic
The loss of static electricity as electric charges move from one object to another is referred to as "electrostatic discharge / option c: static electricity". It occurs when the accumulated electric charges neutralize, resulting in a transfer of charge and the dissipation of static electricity.
The phenomenon of electrostatic discharge involves the movement of electric charges from one object to another, leading to the loss of static electricity. When two objects have different electric potentials or charges, they can exchange electrons through a conductive pathway,
allowing the charges to equalize. This process occurs due to the repulsion or attraction of electric charges, which creates an electric field and electric force between the objects.
(a) The electric field is a region surrounding an electric charge or charged object that exerts a force on other charges within its vicinity. It plays a role in the transfer of electric charges during electrostatic discharge.
(b) The electric force refers to the attraction or repulsion between electric charges, resulting in the movement of charges when objects come into contact or close proximity. It is responsible for driving the transfer of charges during electrostatic discharge.
(c) Static electricity refers to the accumulation of electric charges on an object or surface, resulting in an imbalance of charges. Electrostatic discharge occurs to eliminate this static electricity by allowing charges to move from areas of higher concentration to areas of lower concentration.
(d) Electrostatic refers to phenomena and properties related to stationary electric charges. Electrostatic discharge is an example of the behavior of electric charges in static situations and their subsequent discharge.
Learn more about electricity here:
https://brainly.com/question/33513737
#SPJ11
How much energy is required to accelerate a spaceship with a rest mass of 133 metric tons to a speed of 0.537c ? Tries 0/20 Every day our Earth receives 1.55×10^22J energy from the Sun. If we were able to use 0.85 percent of this enerav to accelerate spaceships, then how many missions would be possible in one year? Tries 0/20
To accelerate a spaceship with a mass of 133 metric tons to a speed of 0.537c, the energy required can be calculated using Einstein's mass-energy equivalence principle. By converting the mass to kilograms and applying the equation E = [tex]mc^2[/tex], the energy can be determined. If 0.85 percent of the daily solar energy received (1.55×[tex]10^22[/tex] J) is available for spaceship acceleration, the number of missions possible in one year can be calculated by dividing the available energy by the energy required per mission.
To calculate the energy required to accelerate a spaceship with a rest mass of 133 metric tons to a speed of 0.537c, we can use Einstein's mass-energy equivalence principle, E = [tex]mc^2[/tex]. First, convert the mass of the spaceship to kilograms by multiplying it by 1000. Then, calculate the energy using the formula:
E = (mass) *[tex](speed of light)^2[/tex] * sqrt(1 -[tex](velocity/speed of light)^2[/tex])
For the second question, if we can use 0.85 percent of the daily energy received from the Sun (1.55×[tex]10^22[/tex] J), multiply this value by the number of days in a year (365) to find the total available energy. Divide this energy by the energy required for each mission to determine the number of missions possible in one year.
Number of missions = (Available energy) / (Energy required per mission)
Calculating these expressions will provide the complete answers.
To know more about mass-energy refer to-
https://brainly.com/question/32237755
#SPJ11
The earth's atmosphere has about \( 10^{-4} \% \) helium and about \( 10^{-5} \% \) hydrogen Can this be explained from kinetic theory considerations?
The presence of helium and hydrogen in the Earth's atmosphere can be explained through kinetic theory considerations. The different masses and velocities of gas particles lead to variations in their distribution, resulting in the observed concentrations of helium and hydrogen.
According to the kinetic theory of gases, gases consist of numerous particles in constant random motion. The average kinetic energy of gas particles is directly proportional to the temperature. However, the speed and mass of particles also play a role in determining their distribution in the atmosphere.
Helium (He) has a lower mass compared to other gases, including nitrogen and oxygen, which are the primary components of the Earth's atmosphere. Due to its lower mass, helium atoms have higher average velocities at a given temperature.
Consequently, helium tends to have a higher probability of reaching escape velocity and escaping the Earth's gravitational field. This results in a relatively low concentration of helium in the atmosphere.
Similarly, hydrogen (H₂) has an even lower mass than helium, making it more likely to have higher average velocities and escape the atmosphere.
However, hydrogen is also highly reactive and tends to react with other elements, forming compounds or escaping into space. This leads to a very low concentration of hydrogen in the Earth's atmosphere.
In contrast, gases like nitrogen (N₂) and oxygen (O₂) have higher molecular masses and lower velocities, making them less likely to escape and allowing them to accumulate in larger quantities in the atmosphere.
Therefore, the variations in the mass and velocity of gas particles, as explained by kinetic theory considerations, help us understand the relatively low concentrations of helium and hydrogen in the Earth's atmosphere.
Learn more about kinetic theory here:
https://brainly.com/question/14349214
#SPJ11
Take F=310 N and d=1.0 m. (Figure-1) Part A Determine the force in cable AC needed to hold the 18−kg ball D in equilibrium. Express your answer to two significant figures and include the appropriate units Figure Part B Determine the force in cable AB neesfed to hold the 18−kk ball D in equibrium. Express your answer to two significant figures and inciude the appropriate units.
In Figure-1, the force in cable AC needed to hold the 18 kg ball D in equilibrium is determined in Part A, while the force in cable AB needed to hold the ball D in equilibrium is determined in Part B.
Part A: To determine the force in cable AC, we need to consider the forces acting on the ball D in equilibrium. The weight of the ball D, acting downward, is given by the formula W = mg, where m is the mass and g is the acceleration due to gravity. In this case, the weight W = (18 kg)(9.8 m/s^2) = 176.4 N. Since ball D is in equilibrium, the force in cable AC must balance the weight of the ball. Therefore, the force in cable AC is equal to the weight of the ball, which is 176.4 N.
Part B: In this case, we need to consider the forces acting on the ball D in equilibrium again. The force in cable AB should balance both the weight of ball D and the force in cable AC. Since the force in cable AC is already determined as 176.4 N, the force in cable AB needs to counterbalance this force as well as support the weight of the ball D. Therefore, the force in cable AB is the sum of the weight of the ball D and the force in cable AC, which is 176.4 N plus the weight of the ball (176.4 N + 176.4 N = 352.8 N). Hence, the force in cable AB is 352.8 N.
Learn more about acceleration due to gravity here:
https://brainly.com/question/29135987
#SPJ11
b) From first principles show that the speed of sound in an elastic pipe of thickness t and internal diameter d conveying a fluid is given by [p/K + pd/tE]1/2 Where p is the fluid density, K the bulk modulus of the fluid and E the elasticity modulus of the pipe material. Give all the assumptions you make.(c) Calculate the speed of sound in a 70mm internal diameter steel pipe conveying water if the wall thickness is 5mm. Assume a water bulk modulus of 2.08 GPa and elasticity modulus of steel 200 GPa if (i) the pipe is assumed rigid (ii) If the pipe is elastic.
In the case of an elastic pipe made of steel with water as the fluid, the speed of sound is approximately 1.02 × 10^6 m/s.
To derive the equation for the speed of sound in an elastic pipe conveying a fluid, let's start from first principles and make the following assumptions:
The pipe is long and straight.
The fluid flow is steady and one-dimensional.
The fluid is incompressible, meaning its density remains constant.
The pipe material is linearly elastic, obeying Hooke's law.
(a) Let's consider a small element of fluid within the pipe. The force acting on this element is due to the pressure difference across it. By Newton's second law, this force is balanced by the elasticity of the pipe material, preventing deformation.
(b) From the force balance, we can equate the pressure force with the elastic force:
Pressure force = Elastic force
A * Δp = (π/4) * d^2 * σ
where A is the cross-sectional area of the fluid element, Δp is the pressure difference across the element, d is the internal diameter of the pipe, and σ is the stress in the pipe material.
Using the definitions of stress and strain, we have:
σ = E * (ΔL / L)
where E is the elasticity modulus of the pipe material, ΔL is the change in length of the pipe element, and L is the original length of the pipe element.
(c) From the above equations, we can write:
A * Δp = (π/4) * d^2 * E * (ΔL / L)
Now, let's consider the speed of sound in the fluid, which is the rate at which a pressure disturbance travels through the fluid. This disturbance travels as a compression wave, causing changes in pressure and density.
Using the definition of speed (velocity = distance/time), we can relate the speed of sound v with the displacement ΔL and the time interval Δt taken by the wave to propagate through the fluid element:
v = ΔL / Δt
(d) Rearranging the equations from step (c), we have:
ΔL / L = (A * Δp) / ((π/4) * d^2 * E)
Substituting this into the equation in step (d), we get:
v = (A * Δp) / ((π/4) * d^2 * E) * 1 / Δt
The term (A * Δp) / ((π/4) * d^2) represents the volume flow rate Q of the fluid. Thus, we can write:
v = Q / (E * Δt)
The volume flow rate Q is given by Q = v * A, where A is the cross-sectional area of the pipe.
Finally, we obtain the equation for the speed of sound in an elastic pipe conveying a fluid:
v = √(Q / (E * Δt))
(e) Now, let's calculate the speed of sound in a steel pipe conveying water:
(i) If the pipe is assumed rigid, the elasticity modulus E can be considered infinite. In this case, the speed of sound will be determined solely by the bulk modulus K of the fluid:
v = √(K / ρ)
where ρ is the density of the fluid.
(ii) If the pipe is elastic, we need to consider the elasticity modulus E of the steel pipe material as well. In this case, the speed of sound is given by:
v = √((K + (ρ * d) / t * E) / ρ)
where d is the internal diameter of the pipe and t is the wall thickness.
By substituting the given values for water (K = 2.08 GPa) and steel (E = 200 GPa), as well as the specific dimensions of the
Therefore, in the case of an elastic pipe made of steel with water as the fluid, the speed of sound is approximately 1.02 × 10^6 m/s.
Learn more about speed of sound here:
https://brainly.com/question/15381147
#SPJ11
The _____ of a lens or mirror is a rotational symmetry axis of the surfaces.
a. light ray
b. paraxial ray approximation
c. optic axis
d. focal point
e. focal plane
The optic axis of a lens or mirror is a rotational symmetry axis of the surfaces. So option c is correct.
The optic axis is the line that passes through the center of a lens or mirror and is perpendicular to its surfaces. It is the axis of rotational symmetry for the lens or mirror.
The other options are incorrect.
A light ray is a beam of light that travels in a straight line. The paraxial ray approximation is an approximation that can be used to simplify the analysis of light rays that are close to the optic axis of a lens or mirror. The focal point is the point where light rays that are parallel to the optic axis of a converging lens or concave mirror converge. The focal plane is the plane that contains the focal point of a lens or mirror.Therefore option c is correct.
To learn more about focal plane visit: https://brainly.com/question/28341058
#SPJ11