Answer:
80 ml
Explanation:
Moles to start = .04 L * .6 M/L = .024 moles
this is how much must be in the final dilution
.2 moles / liter * x liter = .024 moles
x = .024 / .2 = .12 liter final volume
start with . 040 then add .080 to get .12 liter
.080 liter = 80 ml
What is the charge on the potassium ion?
Select one:
a.
1 +
b.
1 -
c.
2 -
d.
2 +
Answer:
a.) 1+
Explanation:
Potassium (K) is located in the first column of the periodic table.
These elements have 1 valence electron. As such, in order to obtain a full octet (8 valence electrons), these elements are likely to lose 1 electron. When this occurs, the element gains an overall charge of 1+ because the positively-charged protons now outnumber the negatively-charged electrons by 1.
Question 6 (Essay Worth 5 points)
(03.04 MC)
What is the name of Pb(NO3)2? Explain how you determined the bond type and the steps you used to determine the naming convention for the compound.
The correct name for the compound is written as lead II trioxonitrate V.
What is the bonding?We know that a compound is formed when atoms are bonded together. The bond that holds atoms together could be ionic, metallic or covalent. We know that in Pb(NO3)2, there is both ionic and covalent bonding.
This is because, the kind of bond between the lead II ion and the nitrate ion is an ionic bond while the bond between the nitrogen and the oxygen atoms in the nitrate ion is covalent bond.
Hence, the correct name for the compound is written as lead II trioxonitrate V.
Learn more about chemical bonding:https://brainly.com/question/15444131
#SPJ1
Question 2 of 10
What button on a scientific calculator is used to enter a number in scientific
notation?
Answer:
It's the button with the x, and a blank box above it.
Explanation:
Check the attachments, you'll see what it looks like. It will probably look different on your calculator, but the icon should be the same or similar.
URGENT
A 10 M concentrated stock solution of NaCl is used to prepare 3 liters of diluted 1 M solution. Which of the following is true for the process used to achieve the required dilution?
The volume of stock solution used is less than 0.2 liters.
The volume of stock solution used is less than 3 liters.
The volume of the solvent used is less than 0.2 liters.
The volume of the solvent used is more than 3 liters.
Taking into account the definition of dilution, the answer is "The volume of stock solution used is less than 3 Liters."
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.
Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeVolume of stock solution usedIn this case, you know:
Ci= 10 MVi= ?Cf= 1 MVf= 3 LReplacing in the definition of dilution:
10 M× Vi= 1 M× 3 L
Solving:
Vi= (1 M× 3 L)÷ 10 M
Vi= 0.3 L
In summary, to prepare 3 Liters of 1 M solution, you need 0.3 L of the 10 M concentration stock solution and dilute to 3 L. Therefore, the answer is "The volume of stock solution used is less than 3 Liters."
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
In many regions of the world, humans rely on underground water supplies called aquifers for fresh water. The amount of water an aquifer can store depends in part on the porosity of the rock or sediment in which the water is stored. Porosity is a measure of the amount of liquid that can be stored in a material and is related to the amount of empty space that exists between individual rock or sediment particles. A group of civil engineers wants to determine whether the porosity of surface soil affects aquifer recharge rates-the ability of aquifers to refill with water. The engineers conduct the following study to determine the porosity of the surface soil at various locations. The results of the study will then be compared with the recharge rates of the aquifer each location supplies with water. 1. Collect one 200-milliliter (mL) sample of soil from each of three locations. 2. Place each soil sample in a beaker. 3. Add 200 mL of water to each sample and allow the water to saturate the soil. 4. Measure the amount of standing water in each beaker (amount of water the soil did not absorb). 5. Determine the amount of water in the soil sample by subtracting the amount of standing water from 200 mL. 6. Divide the amount of water in the soil sample by 200 mL and multiply by 100 to determine the percent porosity of the soil. Which change to the experimental design would improve the reliability of the engineers' measurements?
The change to the experimental design that would improve the reliability of the engineers' measurements is C. testing single samples from more than three locations
What is an experimental design?It should be noted that experimental design is the process of carrying out research in an objective as well as a controlled fashion in order for precision to be maximized and specific conclusions can be drawn from the hypothesis statement.
Based on the information, the locations selected are only three. Also, an area must have more types of soil with variable porosity. Hence, the collection of more soil samples may provide more accurate results than collecting soil samples from only three regions.
Therefore, change to the experimental design that would improve the reliability of the engineers' measurements is the testing single samples from more than three locations.
In conclusion, the correct option is C.
Learn more about experimental designs on:
https://brainly.com/question/1418338
#SPJ1
Complete question:
Which change to the experimental design would improve the reliability of the engineers' measurements?
A. using a liquid other than water to determine porosity
B. using flasks instead of beakers
C. testing single samples from more than three locations
D. testing more samples from each location
A tire has a pressure of 1.8 atm at 20 degrees Celsius. At the end of a long trip, the tire pressure increased to 2.0 atm. What was the temperature of the air inside the tire (in degrees Celsius)?
Answer:
52.57 Celsius
Explanation:
https://brainly.com/question/9731161
Gay-Lussac's law
P1/T1 = P2/T2
pressure 1 / temperature1 = pressure2 / temperature2
temperature has to be in kelvin
20 degrees Celsius is 293.15
1.8 / 293.15 = 2.0 / temperature2
1.8 / 293.15 = 2.0 / x
293.15 * 2.0 = 586.3
586.3 divided by 1.8 =
325.722222222 kelvin which is
52.57222222200005 Celsius
chemlibretextsorg
If the pressure of 1.5 moles of a gas is 2 atm and the temperature is 27°C, what is the volume of the gas?
Group of answer choices
A. 9.25 L
B. 5.0 L
C. 37.0 L
D. 18.5 L
Answer:
D
Explanation:
Ideal gas law PV = n RT R = .082057 T must be in Kelvin
n = moles
V = n RT / P
= 1.5 (.082057) ( 27+ 273.15) / 2 = 18.5 liters
what does it mean Emphasis on object vs woman
Emphasis on object vs woman simply means s- e- x- ual objectification
This goes to say that it emphasizes seeing women as objects of se- xu- al pleasure
What is objectification?Objectification simply refers to the act of treating or viewing a person as an object, devoid of thought or feeling.
Most of the time, objectification is targeted at women and reduces them to objects of se- xu- al pleasure
So therefore, emphasis on object vs woman simply means se- xu- al objectification
Learn more about se- xu- al objectification:
https://brainly.com/question/4231708
#SPJ1
How many grams of NaOH are needed to make a 250.0 mL or a 4.2 M NaOH solution?
Group of answer choices
A. 1.05 grams NaOH
B. 42,000 grams NaOH
C. 42 grams NaOH
D. 1050 grams NaOH
Answer:
C.) 42 grams NaOH
Explanation:
To find the mass of NaOH, you need to (1) find the moles (using the molarity equation) and then (2) convert moles to grams (using the molar mass).
(Step 1)
250.0 mL / 1,000 = 0.2500 L
Molarity = moles / volume (L)
4.2 M = moles / 0.2500 L
1.05 = moles
(Step 2)
Molar Mass (NaOH): 22.990 g/mol + 15.998 g/mol + 1.008 g/mol
Molar Mass (NaOH): 39.996 g/mol
1.05 moles NaOH 39.996 g
----------------------------- x ------------------ = 42 grams NaOH
1 mole
What is an expression of Boyle's law (k = constant)?
A. V/T=K
B. V = kn
C. PV = k
D. Ptotal= P₁ + P₂ + P3 + &
Answer:
C.) PV = k
Explanation:
Boyle's Law is a variation of the Ideal Gas Law when all variables, except for pressure and volume, are held constant.
Pressure is represented by "P" and volume is represented by "V". In the Ideal Gas Law, pressure and volume are inversely proportional (if one goes up, the other goes down). That being said, the equation which best represents Boyle's Law is PV = k.
Which of the following sets of elements could replace the generic "X" symbol with their own to produce a valid dot notation for the element(s)?
Select one:
a.
carbon, silicon, and germanium
b.
oxygen, sulfur, and selenium
c.
boron, aluminum, and gallium
d.
nitrogen, phosphorus and arsenic
Symbol "X" represents Nitrogen, phosphorus, and arsenic.as they have five valence electrons in their valance shell.
What is a Lewis notation?A Lewis form is a completely simplified illustration of the valence shell electrons in a molecule. it's miles used to expose how the electrons are organized round man or woman atoms in a molecule. Electrons are proven as dots or for bonding electrons as a line between the 2 atoms.
Lewis systems, also known as electron-dot structures or electron-dot diagrams, are diagrams that show the bonding between atoms of a molecule, and the lone pairs of electrons that can exist within the molecule.A Lewis form is based totally at the idea of the octet rule, wherein atoms percentage electrons in order that every atom has 8 electrons in its outer shell. for example, an oxygen atom has six electrons in its outer shell.
Learn more about valence electrons :-https://brainly.com/question/371590
#SPJ1
Consider the following reaction at 298K.
Pb2+ (aq) + Cu (s) Pb (s) + Cu2+ (aq)
Which of the following statements are correct?
Choose all that apply.
The reaction is product-favored.
delta G^o < 0
n = 4 mol electrons
K < 1
Eo cell < 0
The true statements are;
K < 0Eocel < 0What is a redox reaction?We define a redox reaction as one in which a specie is oxidized and another is reduced.
Now;
Eo cell = cell potential = -0.13 V - (+0.34 V) = -0.47 V
n =number of moles of electrons = 2 mole of electrons
K = equilibrium constant
ΔG = change in free energy
Eo cell = 0.0592/n log K
-0.47 = 0.0592/2 log K
log K = -0.47 * 2/0.0592
K = 1.3 * 10^-16
ΔG = -nFEo cell
ΔG = -(2 * 96500 * -0.47)
ΔG = 90.7kJ
Learn more about Ecell:https://brainly.com/question/10203847
#SPJ1
How many moles of solute particles are present in 1 mL (exact) of aqueous 0.0040 M Ba(OH)2?
The number of mole of solute particles are present in 1 mL (exact) of aqueous 0.0040 M Ba(OH)₂ is 0.000004 mole
What is molarity?Molarity is defined as the mole of solute per unit litre of solution. Mathematically, it can be expressed as:
Molarity = mole / Volume
With the above formula, we can determine the number of mole present in the solution. Detail below:
How to determine the mole of the solute in the solutionVolume of solution = 1 mL = 1 / 1000 = 0.001 LMolarity of solution = 0.004 MMole of solute =?Molarity = mole / Volume
Cross multiply
Mole = Molarity × volume
Mole of solute = 0.004 × 0.001
Mole of solute = 0.000004 mole
Thus, the mole of the solute in the solution is 0.000004 mole
Learn more about molarity:
https://brainly.com/question/9468209
#SPJ1
Need the answer pretttty pleaseeeeee
Answer:
B.) their electrons are assigned to the s and p orbitals only
Explanation:
Once you get to the fourth row on the periodic table, the transition metals are introduced. The transition metals are located in the d-block and their electrons fill up d orbitals. When an element in the p-block (the right side of the table) is in one of these rows, the d-block has to fill up first.
At a certain temperature the reaction
CO2(g) + H2(g) ↔ CO(g) + H2O(g) has Kc = 2.50.
If 2.00 mol of carbon dioxide and 1.5 mol of hydrogen are placed in a 5.00 L vessel and equilibrium is established, what will be the concentration of carbon monoxide?
The concentration of carbon monoxide at equilibrium is 0.209 M.
Concentration of each gasCO2 = 2 mol/5 L = 0.4
H2 = 1.5 mol/5L = 0.3
ICE tableCreate ICE table as shown below
CO2(g) + H2(g) ↔ CO(g) + H2O(g)
I 0.4 0.3 0 0
C - x - x x x
E 0.4 - x 0.3 - x x x
Kc = [CO][H₂O] / [CO₂][H₂]
2.5 = (x²)/(0.4 - x)(0.3 - x)
x² = 2.5(0.4 - x)(0.3 - x)
x² = 2.5(0.12 - 0.7x + x²)
x² = 0.3 - 1.75x + 2.5x²
0 = 1.5x² - 1.75x + 0.3
solve the quadratic equation using formula method;
x = 0.209
Thus, the concentration of carbon monoxide at equilibrium is 0.209 M.
Learn more about concentration here: https://brainly.com/question/17206790
#SPJ1
[Ir(NH3)₂CI(CO)] draw cis and trans isomers
The IUPAC name of this compound is diamminecarbonylchloroIridium ..
What are Isomers?Isomers are structure of compund in different forms but they have same molecular mass .
The cis and trans form are given in the picture
to learn more about Isomers click here
https://brainly.com/question/13422357
#SPJ9
The graph shows the amount of a gaseous product formed over time during two trials of a reaction. A different concentration of a reactant was used during each trial while other factors were kept constant.
A graph is shown with two graph lines sloping upwards. The title on the x axis is Time and the title on the y axis is Amount of Product. The graph line with a steeper slope is labeled Trial 2 and the other is labeled Trial 1.
Which of the following statements explains which trial has a higher concentration of the reactant?
Trial 1, because the final amount of product formed is higher.
Trial 1, because this reaction lasted for a longer duration than Trial 2.
Trial 2, because this reaction was initially fast and slowed down later.
Trial 2, because the amount of product formed per unit time is higher.
Trial 1 has a lower concentration of the reactant because the because the average rate of the reaction is lower.
What is a reaction?The term reaction has to do with the combination of reactants in order to yield products. Now we know that the reaction profile is used to show the interaction that exists between the reactants and the products.
The y-axis of the graph is for the amount while the x axis of the graph is the reaction time. The rate of reaction is the time taken for a given amount of products to appear or for a given amount of reactants to disappear.
Thus, from the graph, we can see that trial 1 has a lower concentration of the reactant because the because the average rate of the reaction is lower.
Learn more about rate of reaction:https://brainly.com/question/24266729
#SPJ1
Answer: D, Trial 2, because the amount of product formed per unit time is higher.
Explanation:
If the concentration is higher, more reactions can occur, causing more product.
what type of forces which exist in liquid hydrogen fluoride ?
Answer:
H-F is a polar covalent molecule in which dipole-dipole interactions exists
Why does direct titration of aspirin with NaOH have a side reaction and how to prevent it?
Direct titration of aspirin with NaOH have a side reaction simply because aspirin is a weak acid
What is direct titration?
Direct titration can simply be defined as a type of titration in which a titrant of known concentration and volume is added to a substance in order to analyze it.
As the name implies, it is called direct titration simply because the one approaches the endpoint of the experiment directly.
Furthermore, the significance of direct titration is that it is used to find the quantity of a substance within a solution with chemical reactions.
So therefore, direct titration of aspirin with NaOH have a side reaction simply because aspirin is a weak acid
Learn more about titration:
https://brainly.com/question/186765
#SPJ1
What is the isotopic symbols for
Beryllium atom that contains 9 nucleon?
Answer:
Beryllium-9 is the isotope of beryllium with relative atomic mass 9.
An ion of a single pure element always has an oxication number of
A. magnitude equal to its atomic number
OB. 1
OC.0
OD. None of these
Answer:
C. zero 0
Explanation:
single elements will always possess an oxication number of zero
In Boston elevation 20 feet, your mass is 75 kg. On top of Mt. Everestt (elevation 29,029 feet) you mass would be
Answer:
75 kg or 75,000 g
Explanation:
Mass is a measurement that describes the amount of matter within an object. This is a constant measurement that does not change regardless of the object's location.
As such, a person's mass would be the same at both elevations.
**Their weight, however, may change.
** 1 kg = 1,000 g
Based on periodic trends and the data in the table above, which of the following is the most probable value for the ionic radius of K+?
Based on periodic trends, the most probable value for the ionic radius of K⁺ is 133 pm.
What are periodic trends?
Periodic trends are the observation which are seen in the chemical and physical elements found in the periodic table.
Periodic trends is based on the periodicity of elements.
Periodicity is the variation seen in the chemical and physical properties of the elements in the period table in a regular pattern, both down the groups and across the periods.
The periodic trends observed in metallic ions is that ionic radius of metallic ions increase down a group but decreases across a period.
Based on this periodic trend, the most likely size of the potassium ion, K⁺ is 133 pm.
In conclusion, the ionic radius of metallic ions increase down a group and decrease across a period.
Learn more about ionic radius at: https://brainly.com/question/19032815
#SPJ1
Which of the following happens when a reaction reaches dynamic equilibrium in a closed system? (4 points)
Group of answer choices
The concentrations of the reactants and products increase.
The concentrations of the reactants and products decrease.
The rate of the forward reaction equals the rate of the reverse reaction.
The rate of the forward reaction is slower than the rate of the reverse reaction.
The rate of the forward reaction equals the rate of the reverse reaction.
What is dynamic equilibrium?When it comes to chemical reactions, a dynamic equilibrium is a condition in which a reversible reaction produces products and reactants at an equal rate.
Dynamic equilibrium can only be achieved in a closed system. That is, a system in which there are no external influences in form of energy, material, or pressure.
For example, consider the following reversible reaction:
[tex]A + B < --- > C + D[/tex]
If the reaction is in dynamic equilibrium, there will not be a net production of reactants and products. In other words, the rate of production of A and B will be the same as the rate of production of C and D.
This is as opposed to static equilibrium in which the production of both reactants and products stops completely after reaching equilibrium.
More on dynamic equilibrium can be found here: https://brainly.com/question/14280660
#SPJ1
A solution of dextrose contains 25.0 g solute in 250.0 g water. How should the percentage by mass of dextrose in this solution be calculated?
Answer:
9.10% dextrose
Explanation:
To find the mass percent, you need to use the following equation:
mass (g) of solute
Mass Percent = --------------------------------- x 100%
mass (g) of solution
You can plug the given values into the equation and solve to find the mass percent of dextrose. But first, you need to calculate the mass of the solution.
Mass (solute): 25.0 g
Mass (solution): 250.0 g + 25.0 g = 275 g
25.0 grams
Mass Percent = ------------------------ x 100%
275 grams
Mass Percent = 0.0909 x 100%
Mass Percent = 9.10%
A solution of dextrose contains 25.0 g solute in 250.0 g water. 9.10% is the percentage by mass of dextrose in this solution.
A component's concentration in a combination or compound can be expressed as a mass percent, also known as a weight percent. It shows how much of the total mass of the solution or mixture is made up of the solute's (component's) mass. In chemistry, mass percent is frequently employed and stated as a percentage.
Mass Percent = mass (g) of solute/ mass (g) of solution x 100%
Mass (solute): 25.0 g
Mass (solution): 250.0 g + 25.0 g = 275 g
Mass Percent =25.0 grams / 275 grams x 100%
Mass Percent = 0.0909 x 100%
Mass Percent = 9.10%
To know more about percentage by mass, here:
https://brainly.com/question/31309409
#SPJ7
Which of the following elements has the highest electronegativity?
Group of answer choices
A. Boron
B. Nitrogen
C. Oxygen
D. Carbon
Answer:
The answer is Oxygen
The oxygen has the most electronegativity.
2C2H2(g)+5O2(g)=4CO2(g)+2H2O(g)
How many liters of C2H2 are required to product 12.0 moles CO2, assuming the reaction is at STP?
The volume of ethyne, C₂H₂ required to produce 12 moles of CO₂ assuming the reaction is at STP is 134.4 L
Balanced equation2C₂H₂(g) + 5O₂(g) --> 4CO₂(g) + 2H₂O(g)
From the balanced equation above,
4 moles of CO₂ were produced by 2 moles of C₂H₂
How to determine the mole of C₂H₂ needed to produce 12 moles of CO₂From the balanced equation above,
4 moles of CO₂ were produced by 2 moles of C₂H₂
Therefore,
12 moles of CO₂ will be produce by = (12 × 2) / 4 = 6 moles of C₂H₂
How to determine the volume (in L) of C₂H₂ needed at STPAt standard temperature and pressure (STP),
1 mole of C₂H₂ = 22.4 L
Therefore,
6 moles of C₂H₂ = 6 × 22.4
6 moles of C₂H₂ = 134.4 L
Thus, we can conclude that the volume of C₂H₂ needed for the reaction at STP is 134.4 L
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
Classify the following aqueous solutions as: strong acid, weak acid, neutral, weak base, or strong base.
vinegar pH 3.2
battery acid pH 0.5
shampoo pH 7.0
ammonia pH 11.1
Vinegar pH 3.2: Weak acid
Battery acid pH 0.5: Strong acid
Shampoo pH 7.0: Neutral
Ammonia pH 11.1 Strong base
Why do you use the same amount of water for each shape of ice?
Answer:
the water level remains the same when the ice melts
Answer:
Because then the shape that it would look would supposed to look like, would be different.
Explanation:
If I(to study),I(to pass)the exams
If I study, I will pass the exams.