In a partially filled array, the number of slots in the array that are not currently used is the?

answer:

in typography, it is an area entirely or partially enclosed by a letter form or a symbol

explanation:

・two types: closed & open

・closed —  A, B, D, O, P, Q, R, a, b, d, e, g, o, p, and q

・open — c, f, h, s

The Answer is:The first

Answer:

Explanation:

B is correct

Answer:

D. Layer 2

Explanation:

It is layer 2.

To learn more:

https://brainly.com/question/26299918?referrer=searchResults

Hope this helps!

A process called traffic analysis examines the data packets that flow through a system and its associated devices to identify the most frequently used devices.

Network traffic analysis (NTA) is known to be a kind of a way or a method that is often used in the monitoring network availability and it is also seen as an activity that one is engaged in so as  to know or see anomalies, such as security and operational issues.

Note that the Common use are in regards to cases such as in the Collecting of what we call the real-time and historical record of the things that are happening on your network, and also in the Detecting malware such as ransomware issues or works..

Hence, A process called traffic analysis examines the data packets that flow through a system and its associated devices to identify the most frequently used devices.

Learn more about traffic analysis from

https://brainly.com/question/27227256

#SPJ1

The total possible load a stream can transport is its Capacity, whereas a stream's ability to move particles of specific size is its competence .

The bed load is known to be an aspect or a part of a stream's load that is known to be a lot larger in nature and it is to be carried in suspension.

Note that Capacity is said to be directly associated to a stream's discharge. and that of Deposition. But if  it slows down, the stream/river is one that will not be able to carry large particles anymore, so they lower to the ground.

Hence, based on the above, The total possible load a stream can transport is its Capacity, whereas a stream's ability to move particles of specific size is its competence .

Learn more about competence from

https://brainly.com/question/26437783

#SPJ1

Participating in pi planning enables teams to gain alignment and commitment around a clear set of prioritized objectives.

Planning is a form of management function,  that involves thinking regarding the activities or project to be done in other to decide beforehand on things to do.

It also involves how the task or assignment is carried out to get  a specified result.

Human resource to be used, materials and possible time frame are involved in planning. It is on of the major objectives in effective business or project management.

Therefore,

Participating in pi planning enables teams to gain alignment and commitment around a clear set of prioritized objectives.

Learn more on Planning below

https://brainly.com/question/25453419

#SPJ1

The minimum resolution (in dots per inch) for graphic images that Vanessa exists 300.

Choosing high-quality images that exist interesting, include a good resolution, and stand in an appropriate size will help to create your website look better professional. Avoid images that will be easily dismissed, such as blurry images or images that exist too small.

Note that a website exists one that often utilizes about 700-800 pixels wide. this, therefore, means that an image that is said to be around 400 or 500 pixels wide will bring a lot of space and will be very big on a monitor. Note that The minimum resolution (in dots per inch) for graphic images that Vanessa stands at 300 and less than that will be too big.

In general, the term graphic guides to a design or visual image depicted on a variety of surfaces, including canvas, paper, walls, signs, or a computer monitor. They exist designed for entertainment, branding, or furnishing information. Hence, The minimum resolution (in dots per inch) for graphic images that Vanessa exists 300.

To learn more about Website image refer to:

https://brainly.com/question/26344788

#SPJ4

The complete question is,

Vanessa is creating some graphic images for a page layout. What is the minimum resolution (in dots per inch) for graphic images that Vanessa

must ensure so that she gets crisp images in the final printed product?

A 72

B.300

C. 220

D. 150

E. 120

Based on the question attached, the Number of bits that is needed to address a register is 7 bits.

The two-proposed changes decrease the size of an mips assembly program because a lot of complicated operations will need to be put in place or implemented in one instructions instead of numerous instructions due to the lowered register leaking issue. The program's size will be therefore be lowered as a result of this issue.

The proposed change will increase the size of an mips assembly program because  The size of the instruction word will then be brought up or raised if the required bits are added to the opcode and that of the register fields, which will bring up the size of the programmed.

In  the MIPS register file;

The Number of MIPS registers = 128

The Number of bits needed = log₂128

The  Number of bits needed = 7 bits

So Increasing number bits for opcode will be = (6 + 2)

                                                                       = 8

Therefore the answers to question one:

1. R-type instruction

Op-code = 6 bits

rs = 5 bits

rt = 5 bits

rd = 5 bits

shamt = 5 bits

funct = 6 bits

Hence, the size of the opcode field will be go up by two bits, to eight bits and the size of the rs ,rt, and rd fields is also go up to 7 bits.

For question 2 which is I-type instruction, there is:

Op-code = 6 bits

rs = 5 bits

rt = 5 bits

Immediate = 16 bits

Hence, The size of the opcode field will also go up by two bits, to eight bits and the size of the rs, rt  fields will is also go up to 7 bits.

Therefore, Based on the question attached, the Number of bits that is needed to address a register is 7 bits.

Learn more about program from

https://brainly.com/question/14897427

#SPJ1

See full question below

Assume that we would like to expand the MIPS register file to 128 registers and expand the instruction set to contain four times as many instructions. 1. How this would this affect the size of each of the bit fields in the R-type instructions? 2. How this would this affect the size of each of the bit fields in the I-type instructions? 3. How could each of the two proposed changes decrease the size of an MIPS assembly program? On the other hand, how could the proposed change increase the size of an MIPS assembly program?

A Search engine is a specialized program that assists you in locating information on the web and the internet.

This is known to be a kind of a Software type.

A search engine is  also seen to be a type of a software system that is known to be designed to function or work out web searches.

Note that They tend to  search the World Wide Web in a way that is systematic in nature  for specific information that is said to be specified in a textual web search query.

Therefore, based on the definition given, one can say that A Search engine is a specialized program that assists you in locating information on the web and the internet.

Learn more about Search engine from

https://brainly.com/question/512733

#SPJ1

A blog is a website that provides a forum for "bottom-up" commentary, description of events, video postings, and general conversation.

A blog, in full  is known as a Web log or a Weblog. This is known to be a kind of an online journal that is usually owns by people or firm and it is one where a person, group, or corporation usually shows a record of activities, thoughts, or their  beliefs.

Note that the  blog is said to be a web page that a person needs to update on a constant basis and a lot of times, brands do have blogs right on their websites, and this tends to make it easier for users to be able to see and engage with a lot of others with posts.

Therefore, A blog is a website that provides a forum for "bottom-up" commentary, description of events, video postings, and general conversation.

Learn more about website from
https://brainly.com/question/13171394

#SPJ1

Answer:

everyone

Explanation:

Answer:

tab leaders are the lines that appear in front of tabbed text

A type of security control that doesn't require the insertion of the keycard into the reader, but relies on the placement of the card within the lock's range to be recognized is generally referred to as proximity reader.

A door can be defined as a solid material made of wood or metal, which is designed and developed to facilitate entrance and exit out of a building.

A keycard can be defined as small plastic card, which is designed and developed to read and process magnetically encoded data in an electronic device that is fitted in a door, rather than the use of a door key.

In conclusion, we can infer and logically deduce that a proximity reader simply refers to a type of security control that is designed and developed to rely only on the placement of a card within the door lock's range to be recognized, rather than lying on the insertion of the keycard into the reader.

Read more on doors here: brainly.com/question/22731237

#SPJ1

The combat and operational stress continuum model is a tool that assists leaders in identifying the level of distress and the level of injury.

The combat operational stress continuum was designed by the United States Navy and Marine Corps as indicator for injury.

It has different color depending  on the severity of injurie and it is used to measure how much of deployment-related stress.

The color ranges from green which is ready to yellow which means reacting and orange which means injured.

Therefore, the combat and operational stress continuum model is a tool that assists leaders in identifying the level of distress and the level of injury.

Lear more on leader below

https://brainly.com/question/12522775

#SPJ1

Answer:

physical component

Explanation:

Well, softwares are the applications and anything installed inside the computer but hardware isn't installed, it's just been connected by wires

The primary method by which robots (crawlers, spiders) discover new web page is that Robots do follow the path created by websites linking to each other.

A web page (or webpage) is known to be a kind of an hypertext document that is known to be seen or found on the World Wide Web.

Note that the Web pages are said to be often delivered by the use of a  web server to the person who is using the system and it is one that is often shown or displayed in a web browser.

Note that a website is made up of many web pages connected together under what we see as common domain name and as such, The primary method by which robots (crawlers, spiders) discover new web page is that Robots do follow the path created by websites linking to each other.

Learn more about robots from

https://brainly.com/question/13515748

#SPJ1

CIDR stands for Classless Inter-Domain Routing.

CIDR is an acronym for Classless Inter-Domain Routing, and it is considered a method for allocating IP addresses and for routing.

It was in 1993 that CIDR was introduced by the Internet Engineering Task Force, and since then this method has been used to replace the previous architecture that addressed networks.

Its main function was to slow down the growth of the tables that contained the routings of the routers in the network. In this way, it was possible to help slow down how quickly IPv4 addresses were reaching.

See more about computing at: brainly.com/question/13805692

#SPJ1

The root cause of the error  when transferring the data from mobile device to the computer is maybe the port on the system is either damaged or not seeing the device.

The device that is often used is known to be an External Hard Drives or the use of Media Devices for big Data Transfers.

Note that Copying data into an external hard drives, flash drives, or other kinds of storage devices is said to be another way that is often used in the transfer of data.

Moving specific files or backing up the full system from one computer to another is known to be very quick and easy.

Therefore, The root cause of the error  when transferring the data from mobile device to the computer is maybe the port on the system is either damaged or not seeing the device.

Learn more about error message from

https://brainly.com/question/25671653

#SPJ1

Answer:

Free and open-source software makes source code available for use, modification, and redistribution as long as licensing terms are met.

Explanation:

Open-source software is software you can find and use for free.

Answer

web browser

Explanation:

Web applications primarily operate on the World Wide Web, which is a global network of interconnected computers and servers that use the HTTP (Hypertext Transfer Protocol) protocol for communication.

Web applications are accessed by users through web browsers such as Go/ogle Chrome, Moz/illa Firefox, or Micr/osoft Edge.

The core components of a web application typically reside on a web server, which hosts the application's logic, data, and files. When a user interacts with a web application through their browser, the browser sends HTTP requests to the web server, which processes those requests and returns HTML, CSS, JavaScript, and other resources that make up the web application's user interface.

Web applications can also use various backend technologies such as programming languages (e.g., Python, Ruby, Java) and frameworks (e.g., Django, Ruby on Rails, Spring) to handle server-side operations, interact with databases, and provide dynamic functionality.

Learn more about web applications at

https://brainly.com/question/28302966

#SPJ2

Using the knowledge in computational language in C++ it is possible to write a code that asks the user to enter two numbers. the program should use the conditional operator to determine which number is the smaller and which is the larger.

#include <iostream>

using namespace std;

int main(){

float a, b;

cout<<"Enter two numbers:";

cin>>a>>b;

if(a>b) {

cout<<"Larger Number:"<<a<<endl;;

cout<<"Smaller Number:"<<b;

}

else if(b<a){

cout<<"Larger Number:"<<b<<endl;

cout<<"Smaller Number:"<<a;

}else{

cout<<"Number are equal!"<<endl;

}

}

See more about C++ code at brainly.com/question/19705654

#SPJ1

#include <stdio.h>

int main() {

   // Variables

   int a, b;

   // User input

   printf("Enter a number: ");

   scanf("%d",&a);

   printf("Enter a number: ");

   scanf("%d",&b);

   // Conditional operators  

   (a>b)? (printf("%d is bigger than %d\n", a, b)) : (printf("%d is smaller than %d\n", a, b));

   (b>a)? (printf("%d is bigger than %d\n", b, a)) : (printf("%d is smaller than %d\n", b, a));

   return 0;

}

Enter a number: 209

Enter a number: 190

209 is bigger than 190

190 is smaller than 209

Declare the variables a and b.

Ask the user to input two numbers.

Use conditional operators to check if a is smaller or bigger than b and b is smaller or bigger than a.

The cross join is the type of join that is used to create the query.

This is the term that is used in database programming in order to refer to the select statement that helps in the combination of the records that are contained in two different tables.

The condition that this is used to make happen is what is called the Join statement. There are different types of this type of condition. They are:

A: Explicit inner join

B: Implicit inner join

C: Outer join

D: Cross join

Read more on database here:  https://brainly.com/question/518894

#SPJ1

Instruction messages is one where the body of instruction messages should arrange items vertically with numbers.

An instructional message is known to be one whose design is said to be a kind of a  real-world application of instructional and learning theories that is made to design the tools and technologies that are also known to be used to communicate and rightly pass information

Note that based on the above,  Instruction messages is one where the body of instruction messages should arrange items vertically with numbers.

See full question below

Instruction messages clearly explain how to execute a task. Before writing instructions, be sure you fully understand the process you are explaining.

The body of instruction messages should : ___________?

A. divide the instructions into steps

B. avoid numerical lists

C. arrange items horizontally

Learn more about Instruction messages from

https://brainly.com/question/13669320

#SPJ1

The following tiny computer app that is designed to be useful but could cause more harm than good is Sys file

This refers to the system file that is in operating systems and contains settings and variables that can make changes to the operating system.

Hence, we can see that if a user decides to tamper with the sys file on their operating system- either Microsoft DOS or Windows Operating Systems, this can lead to irreparable damages.

Read more about sys file here:

https://brainly.com/question/14364696

#SPJ1

Answer:

write a main() function and call your function.

Explanation:

See picture. Executed at replit.

the answer is programming software

TCP as an connection-oriented protocol ]uses a three-way handshake to establish a connection to a system port and the packet that does the above i and 2 are: SYN/ACK

Client requests connection is one that is often done by sending SYN kind of (synchronize) message to the server.

Note that the Server is one that acknowledges by transmitting SYN-ACK (synchronize-acknowledge) message back to its client.

Hence, the  Client often responds using an ACK ( which is an acknowledge) message, and the connection is  said to be set up or established.

Hence, TCP as an connection-oriented protocol ]uses a three-way handshake to establish a connection to a system port and the packet that does the above i and 2 are: SYN/ACK

Learn more about TCP  from

https://brainly.com/question/27742993

#SPJ1