I NEED A SERIOUS ANSWER PLS. I WILL MARK YOU BRAINLIEST!

6 V drop occurs across the 6 ohm resistor in the parallel circuit diagram. The correct answer is C.

Since this parallel combination is connected with a cell, the potential difference through each resistor will be 6 volts. Now using I=V/R,

Current through 3 ohm resistor = 6/3 = 2 V

Current through 6 ohm resistor = 6/6 = 1 V

And the total current will be the sum of individual current in each resistor using Kirchoff’s junction law, Total current = 3 ampere

Since it is parallel combination the current passing across two resistors can differ but the voltage drop will remain the same.

To know more about resistance:

https://brainly.com/question/12381649

#SPJ1

The pressure drop in pascal is 3.824*10^4 Pascals.

To find the answer, we need to know about the Poiseuille's formula.

                     [tex]Q=\frac{\pi r^4P}{8\beta l}[/tex]

                  [tex]P=3.284Pascals[/tex]

Thus, we can conclude that, the pressure drop in pascal is 3.824*10^4.

Learn more about the Poiseuille's formula here:

brainly.com/question/13180459

#SPJ4

Answer:

The force he will apply is 666.667 N

Explanation:

The impulse is given as the product of Force and time:

              Impulse (I) = F * t

As we are provided with the impulse and that is:

I = 100 ns and t = 0.15 s

So, required force is:

                 F = I/t

                 F = 100/0.15

                 F = 666.6667 N

The sample summary paragraph which discusses an experiment and the results based on the reason why some substances require larger additions before a color change was seen is given below:

If the substance has a weak base solution (pH=8) and you add phenolphthalein, for example, you would only see a pink color change if a lot of phenolphthalein because it is used for stronger bases.

Also, when phenolphthalein is added to acids and weak bases, they tend to have a colorless coloration.

However, if phenolphthalein is added to a strong base, there would be a color change that is noticeable and it would be changed to pink.

This refers to the compound that has the ability to remove a proton from a very weak acid.

Hence, we can see that a summary paragraph is given above based on the use of large addition of elements to some substances before there is a noticeable color change is mentioned above.

Read more about strong bases here:

https://brainly.com/question/15192126

#SPJ1

Ice cubes float in a glass of iced tea because due to a lack of convection, ice cubes will cool more slowly if they are on the bottom. Ice is denser than water at 4° C.

Heat is transferred through convection, which is the large-scale movement of molecules inside gases and liquids. Conduction is used to move heat from the object to the fluid initially, but the fluid motion is responsible for the bulk of the heat transfer.

Natural convection is caused by the fact that most fluids have a tendency to expand when heated, which causes them to become less dense and rise due to the increased buoyancy. Heat is transferred between two bodies by currents of moving gas or fluid, which is known as convection. In free convection, air or water rises and is replaced by a cooler parcel of air or water as it moves away from the hot body.

To learn more about convection please visit-
https://brainly.com/question/16635311
#SPJ4

Answer:

Explanation:

Formula

Electric Force formula

F = k * q1 * q2 / r^2

Gravitation Force Formula

F  = G * m1 * m2 / r^2

Givens

k = 8.99 * 10^9 N m^2/C^2

G = 6.67 * 10^-11  N m^2 /kg^2

Solutions

Fe = 8.99 * 10^9 * 1.6 * 10^-19 ^2/ 8.4 * 10^-11

The force = the electric force constant * the charge of the proton*charge  electron/ distance apart in meters. It looks small but actually it is quite large in comparison to the Gravitational Force

Fe = 3.2 * 10^-8 (Answer First Box)

Fg = 6.67 * 10^- 11 * 9.11*10^-31 * 1.67*10^-27 / 8.4 * 10^-11

The gravitational Force is very small. Just look at the powers which come to 10^-68 - -22 = - 46 which is about 6 times smaller than the electric force.

Fg = 1.44 * 10^-47 (Answer Second Box)

The magnitude of the force is(F)= 0 N.

To calculate the force here we use the formula,

[tex]F= I \times L \times B \times sin\theta[/tex]

Here we are given,

I= The current passing through the wire = 0.60A.

L= The length of the wire= 2.0 m.

B= The magnetic field created by the wire= 0.50T.

[tex]\theta[/tex]= The angle that the wire makes after orientation= 0° (because its orientation is parallel).

We have to find the magnitude of the force = F

Now, we substitute the known values in the above equation,

[tex]F= I \times L \times B \times sin\theta[/tex]

Or, [tex]F= 0.60 \times 2.0 \times 0.50 \times sin (0)[/tex]

Or, F=0

Now from the above calculation we can conclude that, the magnitude of force is 0 N.

Learn more about force:

https://brainly.com/question/12970081

#SPJ4

Answer:

F

Explanation:

When comparing two vector quantities you have to compare both magnitude and direction,but for scalar you only compare magnitude

❄ Hi there,

the answer is F, false.

∵

Vectors have both magnitude and direction, where:

magnitude = length of the arrow that represents the vector

direction = angle

∴ quantities that have only magnitude are not called vector quantities

❄

When the wave speed increases the wave stay the same to get the same standing wave pattern

Standing wave are the combination of two waves moving in opposite directions . Amplitude of both the waves is same and frequency is also same . The phenomenon is the result of interference

Wavelength and frequency are inversely related to each other .

frequency = c / wavelength

so if one get  change then the other changes. As one get decrease other will increase and vise versa. . The speed of the wave depends on the medium. Change in the frequency of the wave changes its form to go into the next harmonic so the wavelength changes .Also in order to maintain the wave pattern the wavelength remain same

Hence , speed of wave will not affect the wavelength of wave.

To learn more about standing waves here

https://brainly.com/question/28175505

#SPJ4

The density of the oil is 917kg/ m³.

An object is said to be naturally buoyant when ithas the tendency to float in a fluid.

from the law of floating when a body float in a liquid,the weight of the liquid displaced by its immersed part is equal to the total weight of body.

That is

weight (w)=upthrust (u)

w=u

therefore

u=Dvg

where, D= density of the ice

v= volume of ice

g= acceleration due to gravity

from the question

given:

 D  = 917kg/m {}^{3} [/tex]

v = 3.00cm {}^{3} [/tex]

g = 9.8m/s {}^{2} [/tex]

substitute these values in above equation

u = 917(3 \times 10 {}^{ - 6} )(9.8)[/tex]

u=0.027N

but,

upthrust= weight of oil displaced.And the ice will displaced an amount of oil,equal to its own weight.

therefore,

density of oil = u/gv = (0.027)/3 \times 10 {}^{ - 6)} (9.8)[/tex]

density of oil = 917kg/m {}^{3} [/tex]

hence the density of the oil is 917kg/m {}^{3} [/tex]

learn more about density from here: https://brainly.com/question/28166066

#SPJ4

The value of Q will be -8 C.

In the presence of an electric or magnetic field, matter experiences a force due to its electric charge.

A moving electric charge generates a magnetic field, and an electric charge has an accompanying electric field.

The information provided in the issue is;

The separation between and is 2m.

The separation between and is 2m.

An origin charge equals +2 C

The electric fields are identical in magnitude but are facing in different directions. As a result, the following relationship can be used

Q/16=1/2

The value of Q will be -8 C.

Learn more about electric charge here

brainly.com/question/8163163

#4174

Th value of q is= -8C

Here, To calculate the value of q we use the formula,

The E-field due to a point charge = [tex]\frac{k\times Q}{D^{2} }[/tex]

Here we are given,

D= the distance along the axes.

k= The coulomb's constant.

We have to find, the charge along the axes = Q

Now, we have to substitute the known values in that equation for the cases,

For the E-field at x=-2 to equal 0, the E-fields from both charges must be equal in magnitude and opposite in direction.

For the first case,  E from +2C charge = [tex]\frac{k\times Q}{D^{2} }[/tex] = [tex]\frac{k\times (+2C)}{2^{2} }[/tex]=[tex]\frac{k\times (+2C)}{4 }[/tex].

For the second case,  E from Q charge= [tex]\frac{-k\times Q}{D^{2} }[/tex]=[tex]\frac{-k\times Q}{(2+2)^{2} }[/tex]=[tex]\frac{-k\times Q}{16 }[/tex].

Now, Comparing the two cases we can find that,

[tex]\frac{k\times (+2C)}{4 }=\frac{-k\times (Q)}{16}[/tex]

Or,[tex]\frac{+2C}{4}= \frac{-Q}{16}[/tex]  (Eliminate k from both sides of the equation.)

Or,[tex]Q=-8C[/tex]

So, from the above calculation we can conclude that,

The value of q is -8C.

Learn more about Charges:

https://brainly.com/question/18102056

#SPJ4

The average velocity of the car in m/s for the first leg is 36.2 m/s and the average velocity (in m/s) for the total trip is 7 m/s

Speed is the distance travelled per time taken. The S.I unit is m/s. The average speed is the ratio of the total distance travelled to the to time taken. While velocity is the distance travelled in a specific direction per time taken

Given that a race car traveling northward on a straight, level track at a constant speed travels 0.760 km in 21.0 s. The return trip over the same track is made in 26.0 s.

(a) The average velocity of the car in m/s for the first leg of the run will be

Velocity = (0.760 x 1000)/ 21

Velocity = 760 / 21

Velocity = 36.2 m/s

(b) The average velocity (in m/s) for the total trip will be

36.2 - (0.760 x 1000)/ 26

36.2 - (760) / 26

36.2 - 29.2

7 m/s

Therefore, the average velocity of the car in m/s for the first leg is 36.2 m/s and the average velocity (in m/s) for the total trip is 7 m/s

Learn more about Speed here: https://brainly.com/question/4931057

#SPJ1

Answer:

If the light were incident upon two polarizers at right angles, no light would get thru - thus each polarizer must block 50% of the light.

One polarizer would allow 50% of the light to pass.

Rubbing water (isopropyl alcohol) has lesser surface tension than that water.

Water possesses a surface tension of 72 dynes/cm.

Whereas rubbing alcohol has a surface tension of 23 dynes/cm.

Surface tension is the propensity of liquid surfaces at rest to shrink to the smallest possible surface area.

Because the atoms on the outside of the molecules (often hydrogens) lack strong hydrogen bonding capabilities, most organic liquids have very low surface tensions. Because isopropanol contains just 28%, OH and the remainder is CH or CH3, the linkages that hold a droplet together are few and far between.

The only substance with a higher surface tension than water is liquid mercury (450 dyne/cm).

Learn more about surface tension here:

https://brainly.com/question/19390213

#SPJ4

The distance between adjacent compressions or rarefactions is called the wavelength of the longitudinal waves.

To find the answer, we have to know more about the Longitudinal waves.

Thus, we can conclude that, the distance between adjacent compressions or rarefactions is called the wavelength of the longitudinal waves.

Learn more about longitudinal waves here:

https://brainly.com/question/5991705

#SPJ4

The mass of an object that experiences a gravitational force of 685 N near earth's surface where g = 9.80 m/s² is 98.89 kg.

Any two mass-containing objects are attracted to one another by the gravitational force. Because it consistently attempts to pull masses together rather than pushing them apart, the gravitational force is known as attractive.

In reality, everything in the cosmos is tugging on everything else, including you!

According to the question,

The gravitational force of 685 N near earth's surface.

The acceleration due to gravity is  g = 9.80 m/s².

The formula for force acting of the body under the influence of gravitation is ;

Force = mass×acceleration

Substitute the given values;

685 = m×9.8

m = 685/9.8

m = 69.89 kg.

Therefore, mass of an object is 69.89 kg.

To know more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

An energy of 25kJ is given out hence the reaction is exothermic.

Chemical reaction is said to occur when reactants combine leading to the formation of products. In a plot of the energy against the reaction profile, the topmost point of the graph is called the activation energy.

We know that a reaction is exothermic when reactants posses more energy than the products. Hence the enthalpy change for this reaction is;

ΔH = 5kJ - 30kJ = -25kJ thus the reaction is an exothermic reaction.

Now, the activation energy for the lighting of the match stick is high that is why a spark is required before the reaction gets underway. Heat is evolved in the process hence the reaction is exothermic. The energy of the reactants is greater than the energy of the products.

Learn more about exothermic reaction:https://brainly.com/question/10373907

#SPJ1

1333.3 is the frequency in the hertz of a signal that repeats 80,000 times within one minute. 0.00075 is its period.

The frequency of a repeated event is its number of instances per unit of time. In some cases, it is also referred to as temporal frequency or ordinary frequency to underline differences with spatial and angular frequencies, respectively.

The length of time it takes for a particle in a medium to complete one full vibrational cycle is the period of a wave. Being a time, a period is measured in time units like seconds, hours, days, or years. The Earth's orbit around the Sun has a duration of around 365 days, and one cycle of the Earth lasts 365 days.

frequency = cycle /second

frequency = 80000 / 60

frequency = 1333.3 hertz

Period = 1 / frequency

Period = 1 / 1,333.3

Period = 0.00075

To know more about  frequency refer to:  https://brainly.com/question/14472937

#SPJ4

The pressure will 14. 0 g of co exert in a 3. 5 l container at 75°c is 4.1atm.

Therefore, option A is correct option.

Given,

Mass m = 14g

Volume= 3.5L

Temperature T= 75+273 = 348 K

Molar mass of CO = 28g/mol

Universal gas constant R= 0.082057L

Number of moles in 14 g of CO is

n= mass/ molar mass

= 14/28

= 0.5 mol

As we know that

PV= nRT

P × 3.5 = 0.5 × 0.082057 × 348

P × 3.5 = 14.277

P = 14.277/3.5

P = 4.0794 atm

P = 4.1 atm.

Thus we concluded that the pressure will 14. 0 g of co exert in a 3. 5 l container at 75°c is 4.1atm.

learn more about pressure:

https://brainly.com/question/22613963

#SPJ4

It will now emit at a rate of 160 W.

the proportion of an emitter's energy to that of a blackbody, a perfect emitter with the same temperature, wavelength, and viewing circumstances. It ranges from 0 (for the optimum reflector) to 1 and has no dimensions (for a perfect emitter).

The ability to reliably measure temperature using an infrared temperature sensor or a thermal imaging camera depends critically on emissivity, which measures a material's capacity to radiate infrared energy from its surface.

The type of surface affects a surface's emissivity in addition to the material. A smooth and polished metal surface will have a low emissivity in contrast to a roughened and oxidized metal surface, which will have a high emissivity.

learn more about emissivity here

https://brainly.com/question/14866809

#SPJ4

Answer:

below

Explanation:

Ice melts, meaning it has a watery layer upon its surface. This allows things to be moving like they are on a liquid but it has the solidity of a solid. The thin metal of the ice skates also decrease the surface area meaning it exerts more force but in turn, it allows you to move faster and further reduces friction.

The experiment's time period is unaffected by the change in amplitude in either experiment.

The time frame is provided by:

[tex]$T=2 \pi \sqrt{\frac{m}{k}}$[/tex]

where,

T = Time period.

M = mass.

k = spring constant.

We can see from the formula above that the only factors affecting the time period in a Simple Harmonic Motion (SHM) are the object's mass and spring constant. Any changes in the object's mass or the spring constant will cause the time period to adapt.

The attribute is known as a spring's "spring constant" describes the relationship between the force acting on a spring and the displacement it causes. In other terms, it describes the stiffness and size of a spring's range of motion.

To know more about Simple Harmonic Motion (SHM) visit:

https://brainly.com/question/17315536

#SPJ4

Answer:13,3 m/s

Explanation:We can use the Torricelli equation:

v^2=v0^2+2ah

the initial velocity is 0

v0^2=0

so:

v^2=0+2*9,8*9

v^2=176,4

v=13,3 (approx)

Answer:

For me i think the answer will be 13.72m/s

the height of the building is H=36 m.

According to Newton's law of gravity, every particle of matter in the universe is attracted to every other particle with a force that varies directly as the product of their masses and inversely as their distance from one another.

Properties of Gravity -

Examples of Gravity -

v₀=0 m/s

H₀=0 m

g=10 m/s²

t=7,2 s

H - ?

[tex]H= H_{0} + v_{0}t+\frac{gt^{2} }{2} \\[/tex]

H = 0 +0 × 7.2 + 10(7.2)²/2

H = 36m

to learn more about Gravity go to - https://brainly.com/question/12528243

#SPJ4

The star with apparent magnitude 2 is more brighter than 7.

To find the answer, we have to know about apparent magnitude.

Thus, we can conclude that, the star with apparent magnitude 2 is more brighter than 7.

Learn more about the apparent magnitude here:

https://brainly.com/question/350008

#SPJ4

Answer:B

0.02166 ohms

Explanation:

Answer:

Explanation:

Formula

Voltage (volts) = current (amps) * resistance (0hms). The terms in brackets are the units.

Givens

V = 13 volts

I = 600 amps

R =  ? ohms

Solution

V = I * R

13 = 600 * R                  Divide both sides by 600

13/600 = 600R/600     Do the division

0.0216 ohms = R           This is almost a dead short.

Answer

R = 0.0216

The pressure of nitrogen which is needed to maintain a N2 concentration of 0. 53 m is 3.2 × 10^(4).

It is defined as the continuous physical force applied on or against an object by something which is in contact with it.

It is also defined as the force per unit area.

The henry law constant is thr ratio of the partial pressure of compound in air to the concentration of compound in water at given temperature.

C= kp

where,

C is the concentration of compound = 0.53m

k is the henry constant = 6. 2×10−4matm

p is the pressure of compound

By substituting all the value we get,

C = 6. 2×10−4 × p

0.53 = 6. 2×10−4 × p

p = 0.53/6. 2×10−4

p = 3.2 × 10^(4)

Thus we find that the pressure needed to maintain a N2 concentration of 0. 53 m is 3.2 × 10^(4).

learn more about Henry's law:

https://brainly.com/question/16222358

#SPJ4

The change in heat q for the aluminum cup is 141 J.  

A substance's heat capacity is the amount of heat needed to increase its overall temperature by one degree. The heat capacity is known as the specific heat capacity or the specific heat if the substance's mass is unity.

change in heat -

The amount of heat Q that is transported to create a temperature shift depends on the substance and phase involved, the mass of the system, and the magnitude of the temperature change. (A) The temperature change and the amount of heat transported are directly inversely related.

The answer's sign dig is determined by a calculation's lowest sign digits.

The solution will need 3 digits because the temperatures are provided with 3 significant digits and the specified heat has 3 significant digits (the mass has 4 significant digits).

31.91 g   * 0.903 J/g-C  *  (26.1 - 21.2 C) = 141 J

to learn more about Specific Heat go to - https://brainly.com/question/21406849

#SPJ4

The magnitude and direction of the electrostatic torce is - 0.00712 x 10^9N towards left direction

Given:

q1 = +2 uC

q2 = -2 uC

q3 = +4 uC

To Find:

magnitude le and direction of the electrostatic torce

Solution: Electric force is a vector quantity. The electric force is proportional to the product of the magnitude of the charges. It is inversely proportional to the square of the distance between the charges. The electric force is calculated by,

F = kqQ/r^2

Force between q1 and q2

F1 = +2 x -2 x k/50 x 50 = - 0.0016k

Force between q1 and q3

F2 = +2 x +4 x k/100 x 100 = + 0.0008k

Net force on charge at origin is F1 + F2

F(net) = F1 + F2 = - 0.0016k + 0.0008k

F(net) = - 0.0008 x 8.9 x 10^9 = - 0.00712 x 10^9N

So, force on charge at origin is - 0.00712 x 10^9N and towards left direction

Learn more about Electric force here:

https://brainly.com/question/25923373

#SPJ4