Glycerin at a temperature of 30 degrees celcius flows at a rate of 8×10−6m3/s through a horizontal tube with a 30mm diameter. what is the pressure drop in pascals per 100m?

The time taken for the tiny saliva to travel is 0.55 second.

The  horizontal distance traveled at speed of 4 m/s is 2.2 m.

The horizontal distance traveled at speed of 20 m/s is 11 m.

The time taken for the tiny saliva to travel is calculated as follows;

h = vt + ¹/₂gt²

where;

h = 0 + ¹/₂gt²

h = ¹/₂gt²

2h = gt²

t² = 2h/g

t = √(2h/g)

Substitute the given parameters and solve for time of motion;

t = √(2 x 1.5 / 10)

t = 0.55 second

X = Vx(t)

X = (4 m/s)(0.55)

X = 2.2 m

X = (20)(0.55)

X = 11 m

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

310 nm

310 nm wavelength of light is the best choice when attempting to quantitatively relate solution absorbance and concentration.

The Beer-Lambert law states that "the quantity of light absorbed by a substance dissolved in a fully transmitting solvent is directly proportional to the concentration of the substance and the path length of the light through the solution."

To learn more about Beer-Lambert law visit:

https://brainly.com/question/8831959

#SPJ4

A 0.20-μf capacitor is connected to a 300-v battery, the potential energy is stored in the capacitor will be 9 * [tex]10^{-3}[/tex] J

The energy stored in a capacitor is nothing but the electric potential energy and is related to the voltage and charge on the capacitor. If the capacitance of a conductor is C, then it is initially uncharged and it acquires a potential difference V when connected to a battery.

Its two plates hold opposite charges and the separation between them creates an electric field. That's why a capacitor stores energy.

Capacitance =  0.20 * [tex]10^{-6}[/tex]

voltage = 300 V

Potential energy stored in a capacitor = 1/2 *C * [tex]V^{2}[/tex]

                                                                = 1/2 * 0.20 * [tex]10^{-6}[/tex] * [tex](300)^{2}[/tex]

                                                                = 9000 *  [tex]10^{-6}[/tex]

                                                                 = 9 * [tex]10^{-3}[/tex] J

To learn more about Capacitance  here

https://brainly.com/question/14746225

#SPJ4

The scales readings are 300 N for each of the scale.

The weight of an object is the force acting on the object due to gravity.

Weight is a vector quantity because it varies from place to place due to difference in acceleration due to gravity and it is measured in Newton (N).

The total weight of the person is supported by the two legs and if the person stand on a level ground, the weight will be evenly distributed and each scale will carry half of the person's weight.

The reading of each scale due to the weight of the person is calculated as follows;

Reading of each scale = total weight / 2

Reading of each scale  = 600 N/2

Reading of each scale  = 300 N

Thus, the scales readings are 300 N for each of the scale.

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

The force on the electron is (F)= 9.2 nN.

To calculate the value of the force on the electron here we use the formula,

[tex]F=k\frac{q_{1} q_{2} }{r^{2} }[/tex]

Here we are given,

[tex]q_{1}[/tex]= The charge of an atomic nucleus= 40e = [tex]40 \times 1.6 \times 10^{-19}[/tex] C.

[tex]q_{2}[/tex]= The charge of an electron = [tex]1.6 \times 10^{-19}[/tex] C.

r= The distance between the nucleus and the electron = [tex]10^{-9}[/tex] m.

k= The Coulomb's constant = [tex]8.99 \times10^9 N m ^2 /C^ 2[/tex]

We have to find the value of the of the force on the electron = F

Now , we substitute the known values in the above equation, we can get

[tex]F=k\frac{q_{1} q_{2} }{r^{2} }[/tex]

Or, [tex]F=8.99\times 10^{9} \frac{40\times 1.6\times 10^{-19} \times 1.6\times 10^{-19} }{(10^{-9})^{2} }[/tex]

Or,[tex]F=8.99\times 10^{9}\times {40\times (1.6\times 10^{-19} )^2\times (10^{9})^{2} }[/tex]

Or, [tex]F= 9.2 \times 10^{-9} N[/tex]

Or, F= 9.2nN

So, from the above calculation we can conclude that the amount of force applied on the electron is 9.2nN.

Learn more about Atomic force:

https://brainly.com/question/25239010

#SPJ4

The craft is moving at a speed of v = 0.024c or around 7 million metres per second or 16 million miles per hour.

The time dilation factor is equal to 3600/3599 if we only want 3599 seconds of the craft's time to pass for every hour (3600 seconds) of Earth time. However, there is a connection as well.

γ = [tex]\frac{3600}{3599}[/tex] = Dilation factor

Also, γ = 1/ √[tex]1-v^{2}[/tex]/[tex]c^{2}[/tex]

which we can solve algebrically to yield,

[tex]\frac{v}{c}[/tex] = √1-1/γ[tex]^{2}[/tex]

we get,

[tex]\frac{v}{c}[/tex] = 0.024

v= 0.024c

Accordingly, the craft is moving at a speed of v = 0.024c, or around 7 million metres per second or 16 million miles per hour.

Learn more about speed of craft here;

https://brainly.com/question/8003060

#SPJ4

Merge sort requires more space than quick sort. Bogo sort is used by the other algorithm to use less space and run slightly faster in average case.

To find the answer, we need to know more about the Maxillary space.

Thus, we can conclude that, merge sort requires more space than quick sort. Bogo sort is used by the other algorithm to use less space and run slightly faster in average case.

Learn more about the algorithm here:

https://brainly.com/question/5055727

#SPJ4

Explanation:

I don't know the exact word which u have to put in the blank spaces.

But Newton's Third Law States:

If a force is exerted there will always be an equal and opposite reactive force.

The average percent increase in the count rate over the voltage range of the Geiger tube plateau is less than 10 percent per 100 volts.

Geiger tubes are the sensing elements of Geiger counters, which are used to measure ionizing radiation. This tube is made of a thin-walled stainless steel and is filled with a mixture of Neon and Halogen gases at low-pressure

The Geiger–Müller tube is filled with an inert gas such as helium, neon, or argon at low pressure, to which a high voltage is applied. The tube briefly conducts electrical charge when a particle or photon of incident radiation makes the gas conductive by ionization.

After the quick rise, the counting rate levels off. This range of voltages is termed the ”plateau” region. Eventually, the voltage becomes too high and we have continuous discharge. The threshold voltage is the voltage where the plateau region begins.

For a good G-M tube, the plateau region should rise at a rate less than 10 percent per 100 volts. That is, for a change of 100 volts, should be less than 0.1.

To learn more about  Geiger–Müller tube  here

https://brainly.com/question/1942002

#SPJ4

Answer:

wattage and time used

Explanation:

Look

If a electrical appliance has more power or wattage it will use more energy and cost more

If a electrical appliance is used for more time the cost is more

Hence Option C is correct

Answer:

m = 15, P = .25, x = .15

F = -K x for spring

ω = (K/m)^1/2

ω^2 = K / m

K = m ω^2 = m (2 π f)^2 = m 4 π^2 / P^2

K = 4  π^2 m / P^2

F = K x = x * 4  π^2 m / P^2

F = .15 * 4 * π^2 * 15 / .25^2

F = 1420 N

Light propogates from soda lime glass into pyrex glass of different refractive indices indicating a change in the medium which can be used to find out the critical angle.

The critical angle is the angle of incidence for which the angle of refraction comes out to be 90°. It is related to the refractive indices (Plural of refractive index) by the following relation:

Sini = 1/u, where u is the ratio of refractive index of medium 2 and medium 1

According to the question, Light propogates from soda lime glass (Medium 1, u1=1.518) into pyrex glass(Medium 2, u2=1.473), i.e. from a denser medium to rarer medium. So, the ratio of refractive index becomes u2/u1= 1.473/1.518=0.97

Putting the ratio in the above-mentioned formula,

∴ Sini = 1/0.97

i= 75.9°

Hence, the critical angle(i) for the given situation is 75.9°.

Learn more about Critical angle here, https://brainly.com/question/15009181

#SPJ4

Thermo-Electrochemical converter (UTEC) is a thermodynamic cycle that does not account for the Carnot Efficiency.

The Carnot cycle is a hypothetical cycle that takes no account of entropy generation. It is assumed that the heat source and heat sink have perfect heat transfer. The working fluid also remains in the same phase, as opposed to the Rankine cycle, in which the fluid changes phase. A practical thermodynamic cycle, such as the Rankine cycle, would achieve at most 50% of the Carnot cycle efficiency under similar heat source and heat sink temperatures.

In a two-cell structure, a thermo-electrochemical converter converts potential energy difference during hydrogen oxidation and reduction to heat energy.

It employs the Ericsson cycle, which is less efficient than the Carnot cycle. In a closed system, it converts heat to electrical energy. There are no external input or output devices.

This means there will be no mechanical work to be done, as well as no exhaust. As a result, Carnot efficiency is not taken into account in this cycle. Carnot efficiency is accounted for by other options such as turbine and engine.

Learn more about Thermo-Electrochemical converter here:

https://brainly.com/question/13040188

#SPJ4

Answer:

They have the SAME momentum ....see below

Explanation:

Momentum = m v

3       3kg * 2 m/s =   6  kg-m/s

2        2kg * 3 m/s =   6 kg - m/s        

Visible light are able to penetrate the atmosphere

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is often defined in wireless systems in metres (m), centimetres (cm), or millimetres (mm).

The electromagnetic spectrum is made up of a variety of electromagnetic radiations, including radio waves, microwaves, infrared light, visible light, ultraviolet light, X-rays, and gamma rays. Because the earth's atmosphere blocks off the majority of the electromagnetic spectrum's wavelengths, most electromagnetic energy from space cannot reach the planet's surface.

. A portion of the electromagnetic spectrum that humans can see with our eyes is the visible light or spectrum. The electromagnetic spectrum's band that can most easily reach Earth's surface is also this one.

to learn more about Wavelength go to - https://brainly.com/question/14640182

#SPJ4

Answer:

10800 kJ

Explanation:

1 watt = 1 Joule /sec

1500 w = 1500 j/sec         2 hours = 7200 sec

1500 j/sec * 7200 sec = 10 800 000 j   = 10 800 kJ

The angular momentum of earth is

7×10^33 kgm^2/sec

Given:

mass of earth = 5.98×1024 kg

radius of earth = 6.38×10^6 m

To Find:

angular momentum

Solution:

For earth we have moment of inertia as

I = 2/5mR^2

and angular velocity as ω = 2π/T

Thus angular momentum is given as

L= 2/5mR^2*2π/T

L = 2/5*5.98×10^24*(6.38×10^6)^2*2*3.14/86400s

L = 7 × 10^33 kg/m^2/sec

So, angular momentum of earth is

So, angular momentum of earth is 7×10^33 kgm^2/sec

Learn more about Angular momentum here:

https://brainly.com/question/13165035

#SPJ4

The surface charge density on the sphere is 0.014C/[tex]m^{2}[/tex].

Given,

r=5.00cm=0.05m, q=7. 5 µc

We know surface charge density σ =q/V=[tex]\frac{7.5*10^{-6} }{\frac{4}{3}\pi 0.05^{3} }[/tex]=0.014C/[tex]m^{2}[/tex].

It is always important to know how charge is moving in an electric field. These fields will also build up electric charges. Therefore, estimation of the surface charge density is essential for a number of applications. It is also necessary to calculate the surface charge density of an electric object using its volume and surface area. The amount of electric charge that has collected in a given field is measured by the surface charge density. Using the dimensions provided, it determines the amount of electric charge. Dimensions of the electric body could be in the form of length, area, or volume. In one, two, or three dimensions, according to electromagnetism, surface charge density is a measurement of the amount of electric charge present in a given volume of space.

A conducting sphere of radius 5. 0 cm carries a net charge of 7. 5 µc. what is the surface surface charge density on the sphere?

Learn more about surface charge density here:

https://brainly.com/question/8966223

#SPJ4

Based on the document attached, the  small bar magnet will be oriented when placed at position X is option d:

The orientation of the magnets   is known to be one that do affect its magnetic force. Atoms atoms, such as iron, are known to often gives a stronger magnetic force when compared to other atoms.

These atoms can be seen as tiny magnets, that has the north and south of each pole. If the poles is known to be oriented in all directions, the material will not bring about a net magnetic force.

Therefore, Based on the document attached, the  small bar magnet will be oriented when placed at position X is option d because the shapes of the magnetic field lines in regards to the bar magnet are said to be closed.

Learn more about magnet  from

https://brainly.com/question/12839896

#SPJ1

Primate B mystery primate is a biped.

The characteristics are:

Lemurs, lorises, tarsiers, monkeys, apes, and humans are all included in the biological order called primates. Class Mammalian of the phylum Vertebrate includes creatures with qualities that have evolved recently in the taxonomic classification of the animal kingdom. 19 subtaxa known as orders have been added to the Mammalia classification. Primates are one of such groups, which contains eutherian animals like monkeys and apes. As a result, during a period of 30 million years, new world and old world monkeys underwent different adaptive radiations and were reproductively isolated. The Oligocene epoch saw the evolution of prosimians. About 30 million years ago, all currently extant primates underwent evolution.

Which mystery primate is a biped? list the characteristics you choose to justify your answer

Learn more about primate here:

https://brainly.com/question/16671781

#SPJ4

Answer:

protect public from pollution

Explanation: got it right

Answer:

The voltage remains constant.

Answer:

The voltage in the circuit remains same. However the current drawn by the circuit will increase.

Explanation:

According to Ohm's Law:

V=IR

If we halved the resistance let:

R'=R/2

then

I'=2I in order to kept the Voltage same. Also the resistance is the opposition to the current. So, if resistance will halved then obviously current will double

So when we put these value in to Ohm's Law the results is:

V'=I'R'

V'=2I(R/2)

V'=IR which is equal to first voltage. Hence,

V'=V

The volume of a solution, in milliliters, that contains 1. 5 g lino3 and has a concentration of 0. 40 m will be 54.35 m L.

Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.

Molarity = n / V

where

n = number of moles

V = volume of solution in l

Molar mass of [tex]LiNO_{3}[/tex] = M of Li + M of N + 3 * M of O

                                    = 7 + 14 + (3*16)

                                    = 69 g/ mole

since , M = n / V

           n = m / molar mass of  [tex]LiNO_{3}[/tex]

substituting the value of n

Molarity  = (m / molar mass of  [tex]LiNO_{3}[/tex]  ) / V

V = m / molar mass of  [tex]LiNO_{3}[/tex]  * Molarity

   = 1.5 / 69 * 0.40

   = 54.35 mL

To learn more about molarity here

https://brainly.com/question/13386686

#SPJ4

The voltage drop across an inductor in a circuit with a dc voltage source at time>> 5*time-constant is more than as compared to first case because the voltage across the inductor is proportional to the rate of change of current which is a maximum at the start when the current and the voltage across the resistor are zero.

As time progresses the current increases at a slower rate as does the voltage across the resistor but the voltage across the inductor decreases.

The voltage drop is proportional to the current, which is the rate-change of the charge. Inductors: V = L (DI/Dt). The voltage drop across the inductor is proportional to the rate-change of the current.

The formula which calculates the inductor voltage is

V= Ldi/dt,

where,

V is the voltage across the inductor,

L is the inductance of the inductor,

di/dt is the derivative of the current flowing across the inductor.

Thus from the above conclusion we can say that The voltage drop across an inductor in a circuit with a dc voltage source at time>> 5*time-constant is more than as compared to first case because the voltage across the inductor is proportional to the rate of change of current which is a maximum at the start when the current and the voltage across the resistor are zero.

Learn more about Voltage drop from here: https://brainly.com/question/1176850

#SPJ4

The terminal speed of the marble is 0.588 m/s.

Given:

We know that,

F = mg                          ......(1)

where,

F = force

m = mass

g = acceleration due to gravity

Also,

v = F/k                            ......(2)

where,

v = terminal speed

k = proportionality constant

Substituting the value of F from equation (1) in equation (2)

v = mg/k                             .......(3)

Given,

m = 30 g = 0.030 kg

k = 0.500 kg/s

g = 9.8 m/s²

To find,

v =?

Put the values in equation (3)

v = mg/k        

v = 0.03(9.8)/ 0.500

= 0.294/0.500

= 0.588 m/s

​

Learn more about the calculation of force, refer to:

brainly.com/question/15562875

#SPJ4

Answer: B

Explanation:

The statement that best describes the types of bonds shown in the diagram is a covalent bond; the hydrogen atom’s single electron is being shared with the chlorine atom, therefore the correct answer is the option B

When two similar or dissimilar atoms form bonds with each other by sharing their valence electron the bond is known as the covalent bond.

The ionic bond is the result of the transfer of the electrons

Ionic bonds are formed between the pair of one electronegative atom and an electropositive atom.

As shown in the diagram there is sharing of the electrons between the hydrogen and the chlorine atom, and we know that covalent bonds are formed by the sharing of the electrons

Since the diagram's covalent bonds are best described by the statement that the hydrogen atom's single electron is shared with the chlorine atom, option B is the right response.

Learn more about covalent bonds from here

brainly.com/question/19382448

#SPJ2

The speed of light in crown glass with the index of refraction is 1.97×10^8 m/s.

Given index of refraction= 1.52

          speed of light in vaccum= 3×10^8 m/s

           speed of light in medium=c/n= 3×10^8/1.52= 1.97×10^8 m/s  

About  index of refraction:

The ratio of the speed of light in a vacuum to that in a second medium with a higher density is used to compute the refractive index (also known as the index of refraction). In mathematical formulae and descriptive writing, the letter n or n' is most frequently used to represent the refractive index variable.

The index of refraction controls how much light is refracted or twisted when it enters a substance.

Learn more about  index of refraction here:

https://brainly.com/question/23750645

#SPJ4

_______________

[tex]I_2=2I_1[/tex]

[tex]L=\text{const}[/tex]

_______________

[tex]\displaystyle \frac{W_2}{W_1}\; - \;?[/tex]

_______________

[tex]\displaystyle \boldsymbol{\frac{W_2}{W_1}}=\frac{\dfrac{LI_2^2}{2} }{\dfrac{LI_1^2}{2} } =\frac{I_2^2}{I_1^2} =\bigg(\frac{I_2}{I_1} \bigg)^2=\bigg(\frac{2I_1}{I_1} \bigg)^2=2^2=\boldsymbol{4}[/tex]

The differential heating of Land and water depends on amount of solar energy reaching earth.

Land is a better conductor of heat than water, heating up and cooling down faster than water.

In summer, amount of solar radiation is highest hence difference of water and land temperature is highest. Air over land heats up and expands hence the air rises above. This rising air is replaced with the surrounding air rich in moisture content from over ocean surface. The degree of differential heating depends on amount of solar energy reaching earth's surface.

This results in Sea Breeze which is from a large body of water towards landmass due to difference in pressure created.

Land Breeze blows towards sea from land at night. It is due to difference in rate of cooling of land and ocean.

Learn more about Breeze here, https://brainly.com/question/1209081

#SPJ4

The volume of a unit cell is 4.3 × 10⁻¹⁰ pm³.

We need to start with the features of a face-centered cubic system in order to be able to determine the edge length of the unit cell.

As we know, a face-centered cubic system is characterized by a unit cell that has a total of 14 lattice points.

Now, these lattice points will contain

Assume that r is the edge length of the unit cell and that r is the radius of an iron atom. You'll see that we can represent x in terms of the cell's diagonal, d, using Pythagoras' Theorem.

        [tex]d^2 = x^2+ x^2[/tex]

        [tex]d^2=2x^2[/tex]

The cell's diagonal will be equal to one radius from the atom in the top corner, two from the atom in the face, and one from the atom in the lower corner.

[tex]d= r+2r+r = 4r[/tex]

This means that we have,

[tex](4r)^2=2x^2[/tex]

[tex]16.r^2 = 2x^2 \\x=\sqrt{8r^2}[/tex]

This is equivalent to

[tex]x=2\sqrt{2} r = 2\sqrt{2} .124= 350.7 pm[/tex]

So, the edge length of the unit cell is equal to 350.7 pm.

The volume of a unit cell. As we know, the volume of a cube is given by the formula

V = [tex]l[/tex] × [tex]l[/tex] × [tex]l[/tex]

[tex]l[/tex] = the edge length of the cube

Volume = (350.7)³ pm³

            = 4.3 × 10⁻¹⁰ pm³

            = 4.3e-30 cm³

Therefore, the volume of the unit cell is 4.3 × 10⁻¹⁰ pm³.

Learn more about unit cell here:

https://brainly.com/question/12977980

#SPJ4