give the systematic name for the compound ba no3 2

The true statements regarding polymers from the options provided are:

- Crosslinking and vulcanization add strength to polymers.

- Polyvinyl chloride (PVC) is commonly used in making floor tile and toys.

- Crosslinking and vulcanization: Crosslinking refers to the formation of covalent bonds between polymer chains, creating a network-like structure. This process enhances the strength, rigidity, and durability of polymers. Vulcanization is a specific type of crosslinking used in the production of rubber to improve its mechanical properties.

- Polyvinyl chloride (PVC): PVC is indeed commonly used in the manufacturing of floor tile and toys due to its versatility, durability, and low cost.

The other statements provided are not true:

- In addition polymerization, a small molecule such as water is not formed for each extension of the polymer chain. Addition polymerization involves the repetitive addition of monomers without the release of small molecules.

- The molecular weight (molar mass) of a polymer does influence its properties like density and mechanical strength, but it does not greatly influence color, refractive index, hardness, or electrical conductivity. These properties are more dependent on the specific chemical composition and structure of the polymer.

- Syndiotactic chain refers to CH3 groups arranged on alternate sides of a polymeric chain, not on the same side. Therefore, the statement regarding syndiotactic chain is not accurate.

Hence, the correct options are:

- Crosslinking and vulcanization add strength to polymers.

- Polyvinyl chloride (PVC) is commonly used in making floor tile and toys.

To know more about polymers click on below link :

https://brainly.com/question/18783528#

#SPJ11

The Lewis structure for CH3NH2 shows a carbon atom bonded to three hydrogen atoms and a nitrogen atom. The structure illustrates the arrangement of atoms and bonds, with the lone pair of electrons on nitrogen not explicitly shown.

Here is the Lewis structure for CH3NH2 (also written as H3CNH2):

    H       H

     |       |

 H - C - N - H

     |

     H

In this Lewis structure, carbon (C) is in the center, surrounded by three hydrogen atoms (H) and one nitrogen atom (N). Each bond is represented by a line, and each atom is depicted with its symbol. The lone pair of electrons on nitrogen is not shown in the structure, but it occupies the remaining electron space around the nitrogen atom.

learn more about Lewis structure here:

https://brainly.com/question/4144781

#SPJ11

The entropy change as a fraction of nR is 0.

To calculate the entropy change (ΔS) as a fraction of nR when the pressure is maintained at 1.00 atm while cooling the sample to -80.0°C, we need to consider the ideal gas law and the relationship between entropy and temperature.

Step 1: Convert temperature to Kelvin

To use the ideal gas law and entropy formulas, we need to convert the temperature from Celsius to Kelvin.

T1 = -80.0°C + 273.15 = 193.15 K (initial temperature)

Step 2: Determine the final temperature

The final temperature is not given explicitly, but since the pressure is maintained constant, we can assume that the temperature changes to -80.0°C in this case as well.

T2 = -80.0°C + 273.15 = 193.15 K (final temperature)

Step 3: Calculate the entropy change

The entropy change (ΔS) for an ideal gas at constant pressure is given by the equation:

ΔS = nR ln(T2/T1)

Since the pressure is constant, the change in entropy is directly proportional to the change in temperature.

Step 4: Determine the fraction of nR

To express the entropy change as a fraction of nR, we divide the calculated ΔS by nR.

ΔS/nR = (nR ln(T2/T1)) / nR

ΔS/nR = ln(T2/T1)

Step 5: Calculate the entropy change as a fraction of nR

Plugging in the values for T1 and T2:

ΔS/nR = ln(193.15 K / 193.15 K)

ΔS/nR = ln(1)

ΔS/nR = 0

Therefore, the entropy change as a fraction of nR, when the pressure is maintained at 1.00 atm while cooling the sample to -80.0°C, is 0.

Learn more about entropy change from the given link: https://brainly.com/question/28244712

#SPJ11

Molasses is generally not produced from sugarcane.

Molasses is a thick, syrupy byproduct of the sugar production process. It is obtained from the juice extracted from sugarcane or sugar beets, which undergoes multiple rounds of boiling and evaporation to concentrate the sugars. As the liquid sugar crystallizes, molasses is left behind.

Among the experiments mentioned, the one that would not be conducted on sugarcane bagasse is testing its overall viscosity using a rheometer. A rheometer is a device used to measure the flow and deformation behavior of materials, but it is not commonly used to specifically determine the viscosity of sugarcane bagasse. Other methods such as standard viscometry or rheological tests may be more appropriate for viscosity measurements.

In the E2 documentary, the fuel/energy source that was replaced upon the implementation of anaerobic digestion to generate methane was kerosene. Anaerobic digestion is a process that involves the breakdown of organic matter in the absence of oxygen, and it produces methane gas as a byproduct. The documentary likely highlighted the replacement of kerosene, a fossil fuel, with methane generated through anaerobic digestion as a more sustainable and environmentally friendly energy source.

Learn more about Bioethanol at https://brainly.com/question/24559554

#SPJ11

The preponderance of protein sequence information is now derived from high-throughput sequencing technologies, such as next-generation sequencing (NGS) and mass spectrometry-based proteomics.

These methods enable rapid and large-scale sequencing of proteins from various sources. NGS allows the determination of DNA or RNA sequences, which can be translated into protein sequences using genetic code rules. Mass spectrometry-based proteomics involves analyzing protein fragments generated from enzymatic digestion and then identifying them through mass spectrometry. These techniques have revolutionized protein research by providing vast amounts of sequence data, enabling the exploration of protein structure, function, and interactions in diverse biological systems.

Learn more about preponderance here:

https://brainly.com/question/30897874

#SPJ11

The value of "n" in the hydrate formula CuSO4 * nH2O is 5.

To determine the value of "n," we need to calculate the molar ratio between the released water and the hydrate copper(II) sulfate.

First, we need to convert the mass of water released to moles. The molar mass of water (H2O) is approximately 18.015 g/mol. Therefore, 5.051 g of water is equal to 5.051 g / 18.015 g/mol ≈ 0.2804 mol.

Next, we calculate the molar ratio between water and copper(II) sulfate. The molar mass of copper(II) sulfate (CuSO4) is approximately 159.609 g/mol. From the balanced chemical equation, we know that one mole of copper(II) sulfate is associated with "n" moles of water.

Assuming that the molar ratio is 1:1 between CuSO4 and H2O, we can set up the following equation:

0.2804 mol H2O = 14.00 g CuSO4 * (1 mol H2O / (159.609 g CuSO4 * n))

By rearranging the equation, we can solve for "n":

n = 14.00 g CuSO4 / (159.609 g CuSO4/mol) = 0.0877 mol

Since "n" represents the number of water molecules, it must be a whole number. Therefore, the closest whole number to 0.0877 is 5.

Therefore, the value of "n" in the hydrate formula CuSO4 * nH2O is 5.

for such more questions on  formula

https://brainly.com/question/26388921

#SPJ8

The diffusion coefficient is 4.39x10-12 m2/s.

Given information;

Initial nitrogen concentration, c₀ = 0.08 wt %

Nitrogen concentration to be achieved, cₙ = 0.52 wt %

Diffusion coefficient, D = 9.10E-05 m²/s

Temperature, T = 1100 K

Activation energy, Qd = 168 kJ/mol

Gas constant, R = 8.31 J/mol K

To find;

Diffusion coefficient at 1100 K using Arrhenius equation;

The Arrhenius equation for diffusion coefficient is given as;

D = D₀ exp(-Qd / R T)

where; D₀ is the diffusion coefficient at an infinite temperature.

Substituting the given values of D, Qd, R, and T into the equation above;

D = 9.10E-05 m²/s

Qd = 168 kJ/mol

R = 8.31 J/mol

KT = 1100 K

At 1100 K, the value of kT is;

kT = R T

     = 8.31 J/mol K x 1100 K

     = 9141 J/mol

Multiplying by Avogadro's number to get the value in J;

9141 J/mol x (6.022 x 10²³) / (1 mol) = 5.50 x 10²⁹ J-1

                                                          = 5.50 x 10²⁹ m²/kg

Multiplying by the Boltzmann constant to get the value in m²/s;

K = 1.38 x 10⁻²³ J/KD₀ can now be obtained by rearranging the Arrhenius equation as;

D₀ = D / exp(-Qd / R T)

Substituting the values into the equation;

D₀ = 9.10E-05 m²/s / exp(-168 x 10³ J/mol / 8.31 J/mol K x 1100 K)D₀

     = 9.10E-05 m²/s / exp(-21.36)D₀

     = 9.10E-05 m²/s / 1.29E-09D₀

     = 7.05E-04 m²/s

Therefore, the diffusion coefficient at 1,100 K if k = 8.31 is;

D = D₀ exp(-Qd / R T)D

   = 7.05E-04 m²/s exp(-Qd / R T)D

   = 7.05E-04 m²/s exp(-168 x 10³ J/mol / 8.31 J/mol K x 1100 K)

D = 7.05E-04 m²/s exp(-21.36)D

   = 4.39 x 10⁻¹² m²/s

Therefore, the correct option is 4.39x10-12 m2/s.

Learn more about Concentration from the given link :

https://brainly.com/question/17206790

#SPJ11

True. In a closed system at a constant temperature, as volume increases, pressure decreases.

According to Boyle's Law, which describes the relationship between pressure and volume of a gas at a constant temperature, in a closed system at a constant temperature, as volume increases, pressure decreases, and vice versa. This relationship can be understood based on the behavior of gas molecules. When the volume of a gas increases, the gas molecules have more space to move around, resulting in fewer molecular collisions with the container walls. As a result, the overall pressure exerted by the gas decreases. Conversely, when the volume decreases, the gas molecules are confined to a smaller space, leading to more frequent molecular collisions with the container walls. This results in an increased pressure exerted by the gas.

Thus, in a closed system at a constant temperature, changes in volume and pressure are inversely related, meaning that as volume increases, pressure decreases, and as volume decreases, pressure increases.

learn more about temperature here:

https://brainly.com/question/17088012

#SPJ11

The application of 234Th to determine particle fluxes in the ocean is known as the Thorium method.

In this method, the measurement of the decay rate of 234Th (half-life of 24.1 days) is used to determine the amount of sinking particles.

The 234Th is introduced into the surface ocean by decay of 238U. The dissolved 234Th is quickly adsorbed onto sinking particles and carried to the deep ocean with the settling particles.Because the decay rate of 234Th is faster than the sinking rate of particles, the excess of 234Th is found in the water column below the production zone.

The Thorium method determines the sinking rate of particles by measuring the excess of 234Th in the water column. It is a useful method to measure particle fluxes in the ocean as the Thorium method offers high resolution and can be used over a wide range of ocean environments.

Thus, this application is known as Thorium method.

To learn more about half-life :

https://brainly.com/question/1160651

#SPJ11

The man-made greenhouse gas that has been shown to be decreasing in emissions since the early 2000s is CFCS (chlorofluorocarbons).

CFCS (chlorofluorocarbons) are a type of man-made greenhouse gas that were widely used in various industries, including refrigeration, aerosol propellants, and foam manufacturing. However, due to their harmful effects on the ozone layer, their production and use have been significantly reduced through international agreements such as the Montreal Protocol.

While most greenhouse gases, such as carbon dioxide and methane, continue to exhibit an exponential growth pattern in emissions, CFCS are an exception. The successful implementation of global regulations and efforts to phase out CFCS has led to a decline in their emissions since the early 2000s.

This reduction in CFCS emissions is a positive environmental outcome as these gases contribute to ozone depletion and have a significant global warming potential. The decrease in CFCS emissions showcases the effectiveness of international agreements and the commitment to mitigating their impact on the environment.

learn more about chlorofluorocarbons here:

https://brainly.com/question/31097078

#SPJ11

It takes approximately 3.88 mol of the gas to have a total average translational kinetic energy of 19100 J.

The total average translational kinetic energy of a gas can be calculated using the formula:

E_avg = (3/2) * N * k * T,

where E_avg is the average translational kinetic energy, N is the number of particles (in this case, the number of moles), k is the Boltzmann constant (1.38 × 10⁻²³ J/K), and T is the temperature in Kelvin.

To find the number of moles, we need to rearrange the formula as follows:

N = (2 * E_avg) / (3 * k * T).

Given that the molar mass of the gas is 35.4 g/mol and the rms speed is 868 m/s, we can calculate the temperature T using the formula for the rms speed:

v_rms = √((3 * k * T) / m),

where m is the molar mass of the gas.

Rearranging the formula, we have:

T = (m * v_rms²) / (3 * k).

Substituting the given values, we find:

T = (35.4 g/mol * (868 m/s)²) / (3 * 1.38 × 10⁻²³ J/K).

Next, we substitute the calculated temperature T and the given average translational kinetic energy E_avg into the formula for the number of moles:

N = (2 * E_avg) / (3 * k * T).

By substituting the values and performing the calculation, we find that it takes approximately 3.88 mol of the gas to have a total average translational kinetic energy of 19100 J.

To know more about kinetic energy refer here:

https://brainly.com/question/30107920#

#SPJ11

The end of the axon where it contacts a target is called the synaptic terminal or axon terminal.

The synaptic terminal is the specialized structure located at the end of the axon in a neuron. It is responsible for transmitting signals from the neuron to the target cell, which can be another neuron, muscle cell, or glandular cell.

The synaptic terminal contains synaptic vesicles filled with neurotransmitter molecules. When an electrical impulse (action potential) reaches the terminal, it triggers the release of neurotransmitters into the synaptic cleft, a small gap between the terminal and the target cell.

The neurotransmitters then bind to receptors on the target cell's membrane, initiating a response in the target cell, such as the generation of an electrical impulse or the release of hormones.

Overall, the synaptic terminal plays a crucial role in facilitating communication between neurons and their target cells, enabling the transmission of signals across the nervous system.

learn more about axon terminal here:

https://brainly.com/question/30749789

#SPJ11

The heat added to the system (q) is 6261 J, the work done on the system (w) is -6261 J, the change in energy (ΔU) is 0 J, and the change in enthalpy (ΔH) is 6261 J.

To calculate the values for q (heat added to the system), w (work done on the system), ΔU (change in energy), and ΔH (change in enthalpy) for the isothermal expansion, we need to consider the ideal gas law and the definition of enthalpy.

Temperature (T) = 300 K

Number of moles of gas (n) = 5.0 moles

Initial volume (V₁) = 500 cm³

Final volume (V₂) = 1500 cm³

First, let's calculate the work done on the system (w) during the isothermal expansion. For an isothermal process, the work done is given by:

w = -nRT ln(V₂/V₁)

where:

n is the number of moles of gas

R is the ideal gas constant (approximately 8.314 J/(mol·K))

T is the temperature in Kelvin

V₁ and V₂ are the initial and final volumes, respectively

Substituting the given values into the equation:

w = -(5.0 mol)(8.314 J/(mol·K))(300 K) ln(1500 cm³ / 500 cm³)

w ≈ -6261 J

Next, the change in energy (ΔU) can be calculated using the first law of thermodynamics:

ΔU = q - w

Since the process is isothermal, the change in internal energy is zero (ΔU = 0). Thus:

0 = q - (-6261 J)

q = 6261 J

Finally, the change in enthalpy (ΔH) for an isothermal process is equal to the heat added to the system (q):

ΔH = q = 6261 J

Therefore, for the given conditions, the heat added to the system (q) is 6261 J, the work done on the system (w) is -6261 J, the change in energy (ΔU) is 0 J, and the change in enthalpy (ΔH) is 6261 J.

To know more about enthalpy change, refer here:

https://brainly.com/question/31429809#

#SPJ11

The number of moles of gas present is given by n = (36.6 J/K) / (R ln(3.99 L / 1.45 L)).

To determine the number of moles of gas present, we need to use the formula for entropy change during an isothermal process:

ΔS = nR ln(Vf/Vi)

Where:

ΔS is the entropy change,

n is the number of moles,

R is the gas constant,

Vf is the final volume, and

Vi is the initial volume.

Given that ΔS = 36.6 J/K, Vi = 1.45 L, and Vf = 3.99 L, we can rearrange the equation to solve for n:

n = ΔS / (R ln(Vf/Vi))

Step 1: Convert temperatures from Celsius to Kelvin.

The given temperature is 87.1°C. We need to add 273.15 to convert it to Kelvin:

T = 87.1°C + 273.15 = 360.25 K

Step 2: Determine the gas constant.

The gas constant can vary depending on the units used. We can choose the appropriate gas constant based on the desired units for the number of moles.

Step 3: Calculate the number of moles.

Using the gas constant and the given values, substitute them into the equation and evaluate:

n = (36.6 J/K) / (R ln(3.99 L / 1.45 L))

Step 4: Solve for the number of moles.

Plug in the values and calculate the number of moles of gas present.

Note: Make sure to choose the appropriate gas constant (R) based on the desired units for the number of moles.

Learn more about moles from the given link: https://brainly.com/question/15209553

#SPJ11

A-) A hypothesis is a tentative explanation, while a theory is a well-supported and comprehensive explanation.

(b) A scientific law describes a concise pattern, while a theory provides a comprehensive explanation for a wide range of phenomena.

A- ) A hypothesis and a theory differ in their level of supporting evidence and scope. A hypothesis is a proposed explanation for a phenomenon that is based on limited evidence and serves as a starting point for further investigation. A theory, on the other hand, is a well-substantiated and comprehensive explanation that has been repeatedly tested and supported by a substantial body of evidence.

(b) A theory and a scientific law differ in their nature and scope. A scientific law describes a concise mathematical or descriptive relationship that consistently holds true under specific conditions. It summarizes observable patterns in nature. In contrast, a theory provides a comprehensive explanation for a broad range of phenomena and incorporates multiple hypotheses, observations, and experimental data. Theories are based on well-established principles and have undergone rigorous testing and peer review, whereas scientific laws are more limited in scope and typically focus on specific mathematical relationships or patterns.

learn more about scientific law here:

https://brainly.com/question/17152046

#SPJ11

The correct answer is (b) Na+ entering the cell through chemically gated channels.

A graded depolarization refers to a change in the membrane potential of a cell where the potential becomes less negative (depolarized) in a graded manner. This type of depolarization can occur when positive ions, such as sodium (Na+), enter the cell.

Option (a) states that Na+ entering the cell through voltage-gated channels, which is associated with action potentials rather than graded depolarizations. Voltage-gated channels are typically involved in generating all-or-nothing action potentials rather than gradual changes in membrane potential.

Option (c) states that K+ leaving the cell through voltage-gated channels, which would actually cause hyperpolarization (an increase in the negative charge inside the cell) rather than depolarization.

Option (d) states that K+ leaving the cell through leakage (nongated) channels, which may contribute to the resting membrane potential, but it does not directly cause a graded depolarization.

Therefore, the most appropriate option that can cause a graded depolarization is (b) Na+ entering the cell through chemically gated channels. These channels open in response to specific chemical signals or ligands and allow the flow of Na+ ions, leading to a graded depolarization of the cell membrane.

Learn more about depolarization from the link given below.

https://brainly.com/question/31873477

#SPJ4

Based on the data provided, (a) 31 μm ; (b) 0.02 μm ; (c) 7.8 μm ; (d) 1550 ; (e) 123.98 ; we can analyze the grading of the material on the basis of Fine-Grained Soils vs. Coarse-Grained Soils and discuss its engineering geological behaviour.

To calculate the required statistics and analyze the particle size distribution, we will use the given Malvern laser particle size analyzer data:

Size (um): 0.01 0.02 3.9 7.8 15.6 31 63 125 250 500 1000 2000

% Passing: 0 0.1 4.75 7.09 9.4 11.92 15.98 21.12 46.13 85.57 99.18 100

a. D₆₀ (Median Diameter):

D₆₀ is the particle size at which 60% of the sample is finer. To calculate D₆₀, we need to find the size corresponding to the cumulative percentage of 60% passing.

D₆₀ = 31 μm (the size where the cumulative percentage is closest to 60%)

b. D₁₀ (10% Passing Diameter):

D₁₀ represents the particle size at which 10% of the sample is finer. We need to find the size corresponding to the cumulative percentage of 10% passing.

D₁₀ = 0.02 μm (the size where the cumulative percentage is closest to 10%)

c. D₃₀ (30% Passing Diameter):

D₃₀ is the particle size at which 30% of the sample is finer. We need to find the size corresponding to the cumulative percentage of 30% passing.

D₃₀ = 7.8 μm (the size where the cumulative percentage is closest to 30%)

d. Uniformity Coefficient (Cu):

The uniformity coefficient is calculated by dividing D₆₀ by D₁₀.

Cu = D₆₀ / D₁₀ = 31 μm / 0.02 μm = 1550

e. Coefficient of Curvature (Cz):

The coefficient of curvature is calculated by dividing the square of D₆₀ by the product of D₁₀ and D₃₀.

Cz = (D₆₀)^2 / (D₁₀ * D₃₀) = (31 μm)^2 / (0.02 μm * 7.8 μm) ≈ 123.98

Based on the particle size distribution and the calculated statistics, we can analyze the grading of the material and discuss its engineering geological behavior:

By referring to the soil classification lecture, we can differentiate fine-grained soils from coarse-grained soils based on the particle size distribution. Fine-grained soils typically include clay and silt, while coarse-grained soils include sand and gravel.

In this case, the particle size distribution does not contain any data points indicating the presence of coarse-grained soils (e.g., sand and gravel). The sizes listed in the data range from 0.01 μm to 2000 μm, which indicates that the material consists of fine-grained particles (clay, silt, and possibly fine sand).

The particle size distribution provides insights into the engineering geological behavior of the soil. Fine-grained soils generally have different characteristics compared to coarse-grained soils.

Thus, the required answers are described above.

To learn more about fine grained soil :

https://brainly.com/question/27542425

#SPJ11

Heat cramps occur due to loss of the following​ substances is:

A. Salt

Heat cramps, also known as exercise associated muscle cramps, occur due to the loss of salt (sodium chloride) from the body during prolonged sweating and physical exertion in hot environments. When a person sweats excessively, they not only lose water but also essential electrolytes, including sodium and chloride.

Salt plays a crucial role in maintaining proper muscle function and nerve transmission. It helps with the conduction of nerve impulses and muscle contractions. When the body experiences an imbalance of electrolytes, particularly sodium, it can lead to muscle cramps and spasms, which are characteristic symptoms of heat cramps.

To prevent and treat heat cramps, it is important to replenish both fluids and electrolytes, including salt. Consuming fluids that contain electrolytes, such as sports drinks or oral rehydration solutions, can help restore the body's electrolyte balance and alleviate heat cramps. Additionally, taking breaks to rest and cool down, as well as avoiding excessive physical exertion in hot environments, can help prevent heat cramps from occurring.

To know more about Heat cramps here

https://brainly.com/question/30874825

#SPJ4

The temperature of 0.55 mol of gas at a pressure of 1.5 atm and a volume of 12.5 L is 254.6 K.

To find the temperаture of 0.55 mol of gаs аt а pressure of 1.5 аtm аnd а volume of 12.5 L, we cаn use the ideаl gаs lаw equаtion, which is:

P × V = n × R × T

where P is the pressure, V is the volume, n is the number of moles, R is the gаs constаnt (0.0821 L аtm/mol K), аnd T is the temperаture in Kelvin.

To solve for T, we can rearrange the equation and substitute the given values:

P × V = n × R × T

P × V / (n × R) = T

We аre given: P = 1.5 аtm, V = 12.5 L, n = 0.55 mol аnd R = 0.0821 L аtm/mol K

Substituting these vаlues into the equаtion аnd solving:

P × V / (n × R) = T

(1.5 atm) × (12.5 L) / (0.55 mol × 0.0821 L atm/mol K) = 254.6 K

Learn more about temperature: https://brainly.com/question/11732607

#SPJ11

The amount of heat energy required to raise the temperature of 100 g of copper from 20 °C to 70 °C is 1950 joules (J).

To calculate the amount of heat energy required, we'll use the formula:

Q = m * c * ΔT

Given:

m = 100 g (mass of copper)

c = 390 J/kg·K (specific heat capacity of copper)

ΔT = 70 °C - 20 °C = 50 °C (change in temperature)

First, we need to convert the mass to kilograms since the specific heat capacity is given in J/kg·K:

m = 100 g = 0.1 kg

Now we can substitute the values into the formula:

Q = 0.1 kg * 390 J/kg·K * 50 °C

Calculating the result:

Q = 0.1 kg * 390 J/kg·K * 50 °C

Q = 1950 J

Therefore, the amount of heat energy required to raise the temperature of 100 g of copper from 20 °C to 70 °C is 1950joules (J).

The completed question is given as,

Calculate the amount of heat energy required to raise the temperature of 100g of copper from 20∘C to 70∘C. Specific heat capacity of copper =390Jkg−1K−1.

Learn more about Heat from the link given below.

https://brainly.com/question/30603212

#SPJ4

Lemon juice, pH = 2 would be the most acidic among the given substances. So the correct answer is (d).

The pH is the measure of hydrogen ion concentration in a solution. Substances that have more hydrogen ions (H+) are said to be more acidic, and substances that have fewer hydrogen ions (H+) are said to be less acidic.

An acid is a substance that produces hydrogen ions in an aqueous solution. Acids are known as proton donors because they donate H+ ions to other compounds. Some common examples of acids include vinegar, lemon juice, and stomach acid.

In addition to this, substances that have a pH below 7 are acidic, while substances that have a pH above 7 are alkaline. pH 7 is neutral, such as pure water. So, the order of acidic nature is

e. Stomach secretions, pH = 1.

d. Lemon juice, pH = 2.

a. White wine, pH = 3.

b. Tomato juice, pH = 4.

c. Urine, pH = 6.

To know more about acidic please refer to:

https://brainly.com/question/29796621

#SPJ11

The pH at the equivalence point for the titration is 13.3.

Methylamine (CH₃NH₂) concentration,

C = 0.2MHCl concentration,

C = 0.2MKb of methylamine,

Kb = 5.0

Calculating the pKb of methylamine;

pKb = -log Kb

= -log 5

= 0.70pH

= pKa + log (Base / Acid)

At half equivalence point, the number of moles of methylamine will be equal to the number of moles of hydrochloric acid.

Moles of CH₃NH₂ at half equivalence point = Moles of HCl added

So, Moles of CH₃NH₂ initially = Moles of CH₃NH₂ at half equivalence point + Moles of HCl added/2

Initially, moles of CH₃NH₂ = C x V = 0.2 M × V

Initial moles of CH₃NH₂ = 0.2 M × V0.2 M HCl

means there are 0.2 moles of HCl in 1 liter of HCl; similarly, 0.2 M CH₃NH₂ means there are 0.2 moles of CH₃NH₂ in 1 liter of CH₃NH₂.

If V liters of HCl are added at the equivalence point, the number of moles of HCl added = 0.2 M × V

At half equivalence point, number of moles of HCl added = 0.2 M × V / 2

Also, Moles of CH₃NH₂ at half equivalence point = Moles of HCl added/2

Therefore, 0.2 M × V0.2 M × V / 2 = 0.2 M × V / 2 + 0.2 M × V/2

Therefore, 0.2 M × V / 2 = 0.2 M × V / 2

Solving for V, V = V/2

So, at the equivalence point, 0.2 M of HCl will be added to 0.2 M of CH₃NH₂.

The number of moles of CH₃NH₂ initially = 0.2 M × V

= 0.2 M × 1000 mL

= 0.2 moles

The number of moles of HCl added at the equivalence point = 0.2 moles

The number of moles of CH₃NH₂ at the equivalence point = 0 moles

The number of moles of CH₃NH₃₊ (conjugate acid of CH₃NH₂) at the equivalence point = 0.2 moles

Initial [CH₃NH₂] = 0.2 MC

= (x)(x)/(0.2 - x)

= x² / (0.2 - x)Kb

= [CH₃NH₃₊][OH₋ / [CH₃NH₂]

= x² / (0.2 - x)

Therefore, Kb = (x²) / (0.2 - x)

Solving for x,x = √[Kb(0.2 - x)]

= √[(5.0)(0.2 - x)]

For calculating the pH of the solution at the equivalence point, we know that [OH₋] = [CH₃NH₃₊]

The number of moles of CH₃NH₃₊ at the equivalence point

= 0.2 moles[OH₋]

= (0.2 moles) / (1000 mL)

= 0.2 M = [CH₃NH₃₊]pOH

= -log [OH₋]

= -log (0.2)

= 0.7

At the equivalence point,

pH + pOH = 14pH

= 14 - pOH

= 14 - 0.7

= 13.3

Therefore, the pH at the equivalence point is 13.3.

Learn more about the equivalence point in a titration from the given link-

https://brainly.com/question/23502649

#SPJ11

Particulate matter (PM) is present in the air as a pollutant.

Particulate matter (PM) refers to a mixture of solid and liquid particles suspended in the air. These particles can vary in size and composition, ranging from coarse dust and soot to fine aerosols. PM is classified based on its aerodynamic diameter into PM₁₀ (particles with a diameter of 10 micrometers or less), PM₂.₅ (particles with a diameter of 2.5 micrometers or less), and PM₁ (particles with a diameter of 1 micrometer or less).

These particles are emitted from various sources, including combustion processes, industrial activities, vehicle emissions, and natural sources such as dust and pollen. When inhaled, particulate matter can have detrimental effects on human health, especially the fine particles (PM₂.₅ and PM₁) that can penetrate deep into the respiratory system. They can cause respiratory and cardiovascular problems and contribute to the formation of smog and haze.

Controlling and reducing particulate matter emissions is crucial for improving air quality and protecting human health.

learn more about particulate matter here

https://brainly.com/question/15451216

#SPJ11

An exothermic reaction has a negative enthalpy. Enthalpy (H) is a thermodynamic quantity that represents the heat energy of a system at constant pressure. It is denoted by ΔH, where Δ indicates the change in enthalpy during a reaction.

In an exothermic reaction, energy is released to the surroundings in the form of heat. As a result, the final energy of the system is lower than the initial energy, leading to a negative ΔH value. The negative sign indicates that the reaction releases heat and has a lower enthalpy compared to the initial state.

Exothermic reactions occur when the reactants possess more potential energy than the products. The excess energy is released in the form of heat, resulting in a decrease in enthalpy.

Examples of exothermic reactions include combustion reactions, such as the burning of fuels like gasoline or the reaction between hydrogen and oxygen to form water. These reactions release heat energy as they proceed.

In conclusion, an exothermic reaction has a negative enthalpy (ΔH) because it releases heat to the surroundings. The negative sign indicates that the final state of the system has a lower energy level compared to the initial state.

To know more about exothermic refer here:

https://brainly.com/question/31818882#

#SPJ11

The reaction of carbonic acid with two equivalents of hydroxide ions results in the formation of one carbonate ion and two water molecules is:

[tex]HCO_3^- + OH^- - > CO_3 ^{2-} + H_2O[/tex]

The reaction of carbonic acid (H₂CO₃) with two equivalents of hydroxide ions (OH⁻) can be represented as follows:

[tex]H_2CO_3 + 2OH^- - > CO_3 ^{2-} + 2H_2O[/tex]

In this reaction, two hydroxide ions react with one molecule of carbonic acid to form one carbonate ion (CO₃²⁻) and two water molecules (H₂O).

Carbonic acid is a weak acid that can ionize in water to produce hydrogen ions (H⁺) and bicarbonate ions (HCO₃⁻):

[tex]H_2CO_3 - > H^+ + HCO_3^-[/tex]

When two equivalents of hydroxide ions (OH⁻) are added to the carbonic acid solution, they react with the hydrogen ions (H⁺) to form water molecules:

[tex]H^+ + OH^- - > H_2O[/tex]

The remaining bicarbonate ion (HCO₃⁻) can then react with another hydroxide ion (OH⁻) to form a carbonate ion (CO₃²⁻) and water:

[tex]HCO_3^- + OH^- - > CO_3 ^{2-} + H_2O[/tex]

Overall, the reaction of carbonic acid with two equivalents of hydroxide ions results in the formation of one carbonate ion and two water molecules.

Learn more about Carbonic Acid at

brainly.com/question/31314818

#SPJ4

The first aid measures for ingestion of hydrochloric acid is giving milk or water to the consumer.

The hydrochloric acid is corrosive acid that can harm all the organs coming contact after swallowing it. Swallowing or breathing the acid will result in poisoning, corrosion and hence burning sensation in the tissues.

The person swallowing it must be immediately given water or milk if the actions of vomiting, nausea and consciousness are not there. As these may impair or challenge the swallowing process further harming the victim.

following this, immediately call the ambulance. Ensure to take note of the strength and ingredients of acid consumed along with its amount. Also determine the person's age, weight and alertness condition.

Learn more about poisoning -

https://brainly.com/question/31596198

#SPJ4

i. Oil formation volume factor, B0: The plot of B0 against pressure shows a decreasing trend. As pressure increases, B0 decreases.

This is due to the reduction in oil volume as it is compressed under higher pressure conditions.

Oil formation volume factor, B0, represents the ratio of the volume of oil at reservoir conditions to its volume at surface conditions. It is a measure of how much the oil shrinks when brought to the surface. As pressure increases, the oil is compressed, leading to a decrease in its volume. Therefore, the plot of B0 against pressure shows a decreasing trend, indicating that as pressure increases, the oil formation volume factor decreases.

ii. Gas solubility, R5: The plot of R5 against pressure exhibits an increasing trend. As pressure rises, R5 increases, indicating that more gas molecules dissolve in the oil phase.

Gas solubility, R5, refers to the amount of gas that can be dissolved in a given volume of oil at a specific pressure and temperature. The plot of R5 against pressure shows that as pressure increases, more gas molecules are forced into solution within the oil. This phenomenon occurs due to the higher pressure pushing gas molecules into the oil phase, increasing the gas solubility. Therefore, the plot of R5 against pressure displays an increasing trend.

iii. Oil viscosity, μ0: The plot of μ0 against pressure generally demonstrates a decreasing trend. As pressure increases, the oil viscosity decreases, indicating that the oil becomes less resistant to flow.

Learn more about pressure increases here:

https://brainly.com/question/11864750

#SPJ11

The sheathing is a layer installed on the exterior of a structure to provide structural stability, insulation, and a base for siding, enhancing the building's durability and energy efficiency.

The sheathing is a layer of material that is installed on the exterior of a structure, typically on the studs, to provide structural stability, insulation, and a base for siding. It serves as a protective barrier against external elements and helps to maintain the integrity and strength of the building.

Sheathing materials can vary and may include plywood, oriented strand board (OSB), or other composite panels. These materials are durable and resistant to moisture, providing a solid foundation for attaching exterior finishes such as siding.

In addition to providing structural stability, sheathing also contributes to the insulation of the building envelope. It helps to reduce heat loss or gain, improving energy efficiency and creating a more comfortable indoor environment.

Overall, sheathing plays a crucial role in supporting the exterior finishes of a building, enhancing its durability, thermal performance, and aesthetic appeal.

learn more about structural stability here:

https://brainly.com/question/32913460

#SPJ11

To avoid an explosion in a hazardous area, the IEC recognizes the following four ignition source isolation methods:1. Oil-immersed switch 2. Extinguishing barriers 3. Restricted breathing enclosures4. Positive displacement equipment.

The International Electrotechnical Commission (IEC) is a worldwide organization that defines and develops standards for a variety of electrical devices and equipment. To avoid an explosion in a hazardous area, the IEC recognizes the following four ignition source isolation methods:1. Oil-immersed switch 2. Extinguishing barriers 3. Restricted breathing enclosures 4. Positive displacement equipment.

1. Oil-immersed switch: An oil-immersed switch is a type of switch that is used to isolate ignition sources in hazardous areas. It works by immersing the contacts of the switch in a non-combustible oil, which helps to prevent the electrical arcs that can cause an explosion.

2. Extinguishing barriers: An extinguishing barrier is a type of device that is used to isolate ignition sources in hazardous areas. It works by providing a physical barrier between the ignition source and the flammable materials. The barrier is designed to contain and extinguish any flames that might be produced by the ignition source.

3. Restricted breathing enclosures: A restricted breathing enclosure is a type of enclosure that is designed to prevent the ignition of flammable materials in hazardous areas. It works by restricting the flow of air into the enclosure, which reduces the amount of oxygen available to support combustion.

4. Positive displacement equipment: Positive displacement equipment is a type of equipment that is designed to prevent the ignition of flammable materials in hazardous areas. It works by using a positive displacement mechanism to move fluids or gases through the system, which helps to prevent any leaks or spills that could cause an explosion.

Read more about IEC at https://brainly.com/question/14306744

#SPJ11

A. Paper makes up the largest proportion of MW in the United States. (False)  C. Total waste generation in the United States has been steadily increasing since about 1950. Globally. (False)

D. Solid waste management costs are expected to begin decreasing as waste management technology gets cheaper. (False)

The false statements are A, C, and D.

A. Paper does not make up the largest proportion of municipal waste (MW) in the United States. While paper waste is significant, it is not the largest component. Other materials like food waste, plastics, and metals also contribute to MW.

C. Total waste generation in the United States has not been steadily increasing since about 1950. In fact, waste generation rates have fluctuated over the years due to various factors such as population growth, consumption patterns, and waste management practices.

D. Solid waste management costs are not expected to decrease as waste management technology gets cheaper. While advancements in technology can lead to more efficient waste management processes, they often come with their own costs, such as implementation, maintenance, and regulatory compliance. These factors can offset any potential cost savings and may even lead to an increase in waste management costs over time.

learn more about Solid waste management here:

https://brainly.com/question/14665452

#SPJ11