excel copies page setup characteristics when one sheet is copied to another.

true or false

The statement given "A scalable design can expand to meet new business requirements and volumes." is true because a scalable design can expand to meet new business requirements and volumes.

Scalability refers to the ability of a system or design to handle increased workloads and accommodate growth without experiencing a significant decline in performance or functionality. A scalable design is intentionally created to be flexible and adaptable, allowing it to scale up or down based on changing business needs and volumes. This means that as the demand or requirements of a business increase, a scalable design can effectively expand its capacity and resources to meet those demands without sacrificing performance or incurring major disruptions. Thus, the statement is true.

You can learn more about Scalability  at

https://brainly.com/question/30366143

#SPJ11

The answer is False. Most computers and electronic devices actually operate on digital signals, which use discrete values and binary code to represent information.

Digital devices process and transmit data in the form of binary digits (bits) that can take on two states: 0 and 1. These devices utilize digital circuits and components to perform calculations, store data, and communicate information.

Analog signals, on the other hand, are continuous and represent information as a continuous variation of voltage or current over time. While there are analog components and systems used in certain applications, such as audio and video processing, the majority of computers and electronic devices, including computers, smartphones, and digital cameras, primarily rely on digital technology.

Learn more about binary code here:

https://brainly.com/question/28222245

#SPJ11

In Seattle, where the climate is characterized by cold, wet, and cloudy conditions for a significant portion of the year, the least-expensive way to obtain electricity would likely be from the local public-power utility (option a). Public-power utilities typically have access to diverse energy sources and infrastructure that enable them to provide reliable and cost-effective electricity to the community.

While installing a large windmill (option b) may seem like a renewable energy solution, Seattle's climate may not be ideal for consistent and efficient wind power generation. The region's relatively low wind speeds and frequent cloudy conditions could limit the windmill's effectiveness and result in lower electricity generation compared to areas with more favorable wind resources.

Tapping deep geothermal heat (option c) is a viable renewable energy option in some areas, but it requires substantial initial investment and suitable geothermal resources. Seattle's geothermal potential is limited, and the cost of drilling deep wells for geothermal energy extraction may not be economically feasible in this context.

Similarly, installing solar panels (option d) in a region with limited sunlight and frequent cloud cover may not provide optimal electricity generation. The reduced sunlight and lower solar irradiance levels in Seattle would result in lower overall energy output from solar panels, making it a less cost-effective option compared to areas with abundant sunshine.

Therefore, relying on the local public-power utility in Seattle is likely the least-expensive way to obtain electricity, as they can leverage a mix of energy sources, including traditional and renewable options, to provide cost-effective and reliable electricity to the community, irrespective of the challenging weather conditions in the area.

Learn more about electricity here:

https://brainly.com/question/31599943

#SPJ11

The event level that indicates an unrecoverable failure in an application or component is "Critical."

In event logging systems, different levels are used to categorize events based on their severity and importance. Among these levels, the "Critical" level represents the highest level of severity. When an event is logged with the "Critical" level, it indicates a severe and unrecoverable failure in an application or component. This level is typically used to notify system administrators or developers about critical errors that require immediate attention. A "Critical" event signifies a failure that significantly impacts the functionality, stability, or security of the system and may require immediate troubleshooting and remediation to resolve the issue.

know more about Critical :brainly.com/question/15091786

#SPJ11

A "syntax error on token throws extends expected" message typically occurs in Java programming.

When there is a problem with the syntax related to the keywords "throws" and "extends" in a class or method declaration. In Java, the keyword "throws" is used to specify that a method can throw certain exceptions, and it should be followed by the exception types. On the other hand, the "extends" keyword is used in class declarations to indicate inheritance or extension from a superclass. When encountering this error, it suggests that there is an issue with the placement or usage of these keywords.

It commonly arises when the "throws" keyword is incorrectly used in a method declaration or when "extends" is misplaced or missing in a class declaration. To resolve this error, carefully review the code around the mentioned line and ensure that "throws" is used correctly with the appropriate exception types in method declarations. Additionally, verify that "extends" is properly placed and used when declaring classes to indicate inheritance.

Learn more about syntax error on token throws extends expected here:

https://brainly.com/question/31838082

#SPJ11

(a) The private key is (11, 65). (b) The encrypted ciphertext for 15 is 38.

(c) The decrypted original message for ciphertext 5 is 45.

(a) To find the private key, we need to perform the process of key generation in RSA encryption. The public key consists of two parts: (e, n), where e is the encryption exponent and n is the modulus. In this case, the public key is (11, 65).

1. Prime factorization: Determine the prime factors of n. In this case, 65 = 5 × 13.

2. Calculate φ(n): Compute Euler's totient function of n, given by φ(n) = (p1 - 1) × (p2 - 1), where p1 and p2 are the prime factors of n. In this case, φ(n) = (5 - 1) × (13 - 1) = 48.

3. Find the private key exponent (d): Determine the modular multiplicative inverse of e modulo φ(n). In this case, we need to find d such that (11 × d) mod 48 = 1.

Using the extended Euclidean algorithm or a modular inverse calculator, we find that d = 11.

Therefore, the private key is (11, 65).

(b) To encrypt the plaintext value 15 using the public key (11, 65):

1. Apply the encryption formula: Ciphertext (C) = (Plaintext (P)^e) mod n.

  C = (15^11) mod 65.

Performing the calculation, we get C = 38.

Therefore, the encrypted ciphertext for 15 is 38.

(c) To decrypt the ciphertext 5 using the private key (11, 65):

1. Apply the decryption formula: Plaintext (P) = (Ciphertext (C)^d) mod n.

  P = (5^11) mod 65.

Performing the calculation, we get P = 45.

Therefore, the decrypted original message for ciphertext 5 is 45.

Learn more about encrypted ciphertext

brainly.com/question/32330869

#SPJ11

Linux is popular for several reasons, including its open-source nature, stability, security, flexibility, and community support. In academia, Linux is particularly popular due to its educational value, customization options, availability of specialized tools, and compatibility with research and development needs.

1. Open-Source Nature:

Linux is an open-source operating system, which means its source code is freely available for anyone to view, modify, and distribute. This openness fosters collaboration, innovation, and customization. It allows academic institutions to tailor Linux to their specific requirements, create custom applications, and contribute to its development.

2. Stability and Security:

Linux is known for its stability and robustness. It is designed to handle high workloads and provide reliable performance. Additionally, Linux has a strong reputation for security, with a large community of developers constantly monitoring and patching vulnerabilities. In academia, where data integrity and system reliability are crucial, Linux's stability and security features make it an attractive choice.

3. Flexibility:

Linux offers a high degree of flexibility, allowing users to customize and fine-tune the operating system to meet their needs. Academic institutions can customize the Linux environment for specific research and educational purposes. Linux supports a wide range of hardware architectures, making it adaptable to various computing environments.

4. Availability of Specialized Tools:

Linux provides a vast ecosystem of open-source software and tools specifically tailored for academic and scientific pursuits. Many research tools, programming languages, simulation software, data analysis tools, and scientific libraries are readily available for Linux. This availability of specialized software makes Linux a popular choice in academia, as it supports diverse research and educational requirements.

5. Community Support:

Linux has a vibrant and passionate community of users and developers who actively contribute to its development and provide support. This strong community ensures that academic institutions have access to extensive documentation, forums, and resources for troubleshooting, learning, and collaborating. The community-driven nature of Linux aligns well with the academic ethos of sharing knowledge and collaborating with peers.

In summary, Linux's popularity in academia is attributed to its open-source nature, stability, security, flexibility, availability of specialized tools, and the supportive community. These factors make Linux an attractive choice for academic institutions seeking a customizable, reliable, and versatile operating system that aligns with their research and educational objectives.

Learn more about linux:https://brainly.com/question/12853667

#SPJ11

Two real-world applications of Fitts' Law involving width and distance manipulation are: website navigation design and video game control interface design.

Two real-world applications of Fitts' Law that involve manipulating width and distance between items are:

1. Website Navigation: Fitts' Law can be applied to improve website navigation by adjusting the size and spacing of navigation elements such as menus, links, and buttons. By increasing the width of clickable areas and reducing the distance between them, users can more easily and accurately navigate through the website, resulting in a better user experience.

2. Video Game Controls: Fitts' Law can be used in designing video game controls, especially for touchscreens or virtual interfaces. By optimizing the size and placement of control buttons, joysticks, or touch areas, game developers can enhance the accuracy and ease of use for players, allowing them to perform actions quickly and efficiently during gameplay.

To know more about Fitt's Law, visit https://brainly.com/question/28965900

#SPJ11

The self-learning switch will flood the Ethernet frame to all ports except the incoming port if it does not recognize the source MAC address in the arriving frame.

A self-learning switch is a type of Ethernet switch that automatically learns and builds a MAC address table by observing the source MAC addresses of incoming frames. When an Ethernet frame arrives at a switch port, the switch checks its MAC address table to determine the outgoing port for the destination MAC address. However, if the switch does not recognize the source MAC address in the arriving frame, it implies that the MAC address is not present in its MAC address table. In this case, the switch will flood the frame by forwarding it to all ports except the incoming port in an attempt to reach the destination MAC address.

This flooding process ensures that the frame reaches its intended destination, even if the switch is not aware of the specific port associated with the MAC address.

You can learn more about MAC address at

https://brainly.com/question/13267309

#SPJ11

The device that is not connected to the Internet of Things (IoT) among the options given is: A. An AM/FM radio without any Bluetooth or Internet connection capabilities

      The Internet of Things refers to the network of interconnected devices that can communicate and exchange data with each other over the internet. Devices connected to the IoT typically have internet connectivity or utilize wireless communication protocols to connect to other devices or platforms.

  In this case, an AM/FM radio without any Bluetooth or internet connection capabilities does not fall under the category of IoT devices. It operates as a standalone radio device and does not have the capability to connect to the internet or communicate with other devices.

Learn more about standalone radio here:

https://brainly.com/question/32362620

#SPJ11

To list the user exec commands, use the following command: "show user-commands."

The command "show user-commands" is used to display a list of user exec commands available on a networking device. User exec commands are the basic level of commands that a user can execute when logged into a device. These commands provide limited access to the device's functions and are generally used for monitoring and basic configuration tasks.

When the "show user-commands" command is entered, the device retrieves and displays a list of available user exec commands. This list can vary depending on the specific device and its software version. It typically includes commands such as "show," "ping," "traceroute," "telnet," and other basic network troubleshooting and monitoring commands.

By listing the user exec commands, users can quickly see the available options and choose the appropriate command for their needs. It helps in understanding the capabilities of the device and the available actions that can be performed at the user exec level.

Learn more about user exec commands

brainly.com/question/28464582

#SPJ11

When installing a machine, it is crucial to consider the interrelation between the motor, machine, and controls as a unified unit.

Installing a machine involves not only setting up its physical components but also ensuring the seamless integration of its motor, machine, and controls. These three elements work together as a cohesive unit to enable the machine's proper functioning.

The motor is responsible for providing the necessary power and motion to drive the machine's mechanical components. It converts electrical energy into mechanical energy to facilitate the desired operations of the machine.

The machine refers to the physical structure and mechanisms that perform specific tasks or functions. It includes components such as gears, belts, levers, actuators, or any other mechanical elements that contribute to the machine's intended operations.

The controls encompass the electronic or mechanical systems responsible for managing and regulating the machine's operation. This includes control panels, switches, sensors, relays, and other devices that monitor and govern the machine's performance.

During installation, careful consideration must be given to the interrelation and coordination of these three components. They must be properly aligned, calibrated, and synchronized to ensure smooth operation and prevent any potential issues or malfunctions. This involves connecting the motor to the machine's mechanical components and integrating the controls to facilitate communication and control signals between them.

By treating the motor, machine, and controls as a unified unit during installation, technicians can optimize the machine's performance, efficiency, and reliability.

To know more about machine installation, click here: brainly.com/question/31660272

#SPJ11

The computer subsystem that is not an example of a computer subsystem is the data subsystem.

explanation of each of the other computer subsystems:

Storage subsystem: A storage subsystem is responsible for data storage. Hard disk drives, flash drives, CD drives, and other storage devices are included in this group.

CPU subsystem: The Central Processing Unit (CPU) is responsible for executing instructions in a computer. The CPU controls the computer's clock, handles the computer's input/output (I/O) operations, and handles system memory.

Memory subsystem: The memory subsystem, often known as RAM (Random Access Memory), is a fast storage subsystem that stores the instructions and data that the CPU requires to operate. It's much faster than storage subsystems, but it's also much more expensive.

Data subsystem: A data subsystem is not an actual computer subsystem.

You can learn more about computers at: brainly.com/question/13027206

#SPJ11

Screenwriting uses components from both writing dialogue and writing story sketches.

Screenwriting is a form of creative writing that is used to create screenplays or scripts that are primarily used in films, television shows, and video games. A screenwriter's job is to write a script that tells a visual story that will be brought to life through the creative minds of the director, actors, and the rest of the production team.Components of writing dialogue

The most significant component of writing a screenplay is writing dialogue, which is what the characters say to one another. The dialogue should be realistic and reflect the character's thoughts, feelings, and personality. The writer must also ensure that the dialogue is engaging, captivating, and relevant.Components of writing story sketches

Screenwriting also involves the use of story sketches, which are used to create a rough outline of the story. Story sketches can be used to map out the story's plot, characters, and settings. Additionally, the writer must also consider how the story will be told visually. They must take into consideration how the script will be translated onto the screen and how it will be received by the audience.In summary, screenwriting is a combination of writing dialogue and story sketches that tells a visual story. A screenwriter's job is to write a script that tells a compelling story that will be brought to life on the screen.

Learn more about script :

https://brainly.com/question/30338897

#SPJ11

Attrate is endogenous in this model. The distance between a student's living quarters to the campus might potentially be correlated with u.  For dist to be a valid instrument for attrate, it must satisfy two conditions. First, it must be correlated with attendance rate. Second, it must be uncorrelated with the error term u.

(i)

Attrate is endogenous in this model. For example, the variables such as motivation, ability, and preference are plausibly correlated with both attendance rate and u.

(ii)

The distance between a student's living quarters to the campus might potentially be correlated with u. This could be because the distance from a student's living quarters to campus might affect their motivation to attend class. Those who live far away from campus might be less motivated to attend class as compared to those who live close by.

(iii)

For dist to be a valid instrument for attrate, it must satisfy two conditions. First, it must be correlated with attendance rate. Second, it must be uncorrelated with the error term u. This condition might hold because students who live far from the campus might be more likely to stay in class longer than those who live closer to campus.

The commuting time and cost might discourage students from attending class. Therefore, those who live farther away from the campus might be more motivated to attend class.

To learn more about endogenous: https://brainly.com/question/29854288

#SPJ11

When dealing with ipv4, the minimum ip header length is 20 bytes.IPv4 (Internet Protocol version 4) is a protocol that is used in the internet. IPv4 specifies an IP address's format that is 32-bit and allows a total of 4,294,967,296 distinct addresses.

IPv4 packets are composed of two parts: a header and a payload. The IPv4 header is 20 to 60 bytes in length. It contains information about the sender and receiver of the packet, as well as the packet's size and type. The header length of an IP packet is a field that specifies the length of the header in bytes. It is a 4-bit field that can contain values ranging from 5 to 15. The value represents the number of 32-bit words used to encode the header, not including any options that may be present. So, when dealing with ipv4, the minimum ip header length is 20 bytes.

Learn more about header length at https://brainly.com/question/31845582

#SPJ11

An email server is most like a postal service or mail delivery organization. When we think about an email server, it serves as a digital infrastructure responsible for sending, receiving, and storing electronic mail.

A postal service or mail delivery organization handles the physical delivery, sorting, and storage of traditional mail. Both systems act as intermediaries, facilitating the transfer of messages or packages between different individuals or organizations. In the case of an email server, it processes electronic messages, manages user accounts, and ensures the reliable transmission of emails across networks.

It functions as a central hub where emails are received, stored, and delivered to the intended recipients. Similarly, a postal service or mail delivery organization receives physical letters, sorts them based on addresses, and ensures their secure delivery to the appropriate recipients. While there are differences in the underlying technologies and mediums, the core purpose of an email server aligns closely with the functions performed by a postal service or mail delivery organization.

Learn more about email servers here:

https://brainly.com/question/14666241

#SPJ11

If you know the index of an element stored in an array of N unsorted elements, the best description of the order of the algorithm to find the element is O(1).

When you have the index of an element in an array, you can directly access the element using the index without the need for any searching or sorting. The time complexity for accessing an element in an array by its index is constant, denoted as O(1). This means that the time taken to find the element does not depend on the size of the array (N) but rather on a constant time for accessing the element using its index.

To know more about time complexity here: brainly.com/question/13142734

#SPJ11

The Stuxnet attack relied on the use of removable media to cross an airgap between a business and an industrial control system network. This involved infecting USB drives or other portable storage devices with the malware and physically transferring them between the networks.

The Stuxnet attack was a highly sophisticated cyber-attack that targeted industrial control systems, specifically those used in Iran's nuclear program. The attack aimed to disrupt the operation of centrifuges used for uranium enrichment.

To bridge the airgap between a business network and an industrial control system network, Stuxnet employed the use of removable media. In this context, removable media refers to USB drives or other portable storage devices that could carry the Stuxnet malware. The attackers behind Stuxnet strategically infected these removable media devices with the malware.

Once the infected removable media was physically introduced into the business network, such as through an unwitting employee or an insider, the malware would then propagate itself onto the target industrial control system network. This allowed the Stuxnet malware to spread and infect the control systems responsible for managing the centrifuges.

By leveraging removable media as a transmission mechanism, the Stuxnet attack was able to bypass the airgap typically used to isolate sensitive industrial networks from general-purpose business networks. This technique highlights the ingenuity and complexity of the attack, as it exploited a common practice of using removable media for data transfer between different networks.

Learn more about industrial control

brainly.com/question/31713111

#SPJ11

False. Multithreading does not inherently improve database searches. While it is true that using multiple threads can potentially enhance performance in certain scenarios, such as parallelizing independent tasks,

It does not guarantee faster data retrieval in the context of database searches. Database searches primarily depend on the efficiency of the underlying database system, indexing strategies, query optimization, and disk I/O operations. Multithreading alone cannot compensate for suboptimal database design or slow disk access. Additionally, the effectiveness of multithreading for database searches depends on the nature of the workload and the database system's ability to handle concurrent queries. Therefore, multithreading may or may not improve database search performance, and other factors play a crucial role in determining the overall efficiency of the search process.

know more about Database :brainly.com/question/30163202

#SPJ11

T/F: multithreading improves database searches because data is retrieved faster when the system has several threads of execution searching an array simultaneously, especially if each thread has its own cpu.

1.The regression results for the wage equation using the dataset WAGE1.dta are as follows:

log(wage) = β0 + β1educ + β2tenure + β3exper + β4female + β5married + β6nonwhite + u

Sample size: [insert sample size]

R-squared: [insert R-squared value]

Standard errors of coefficients: [insert standard errors of coefficients]

2.The coefficient in front of "female" measures the average difference in the log of wages between females and males, holding all other variables constant. A positive coefficient would indicate that, on average, females earn more than males, while a negative coefficient would suggest the opposite.

3. The coefficient in front of "married" represents the average difference in the log of wages between married and unmarried individuals, controlling for other factors. If the coefficient is positive, it implies that being married is associated with higher wages, on average. Conversely, a negative coefficient would suggest that being married is linked to lower wages.

4. The coefficient in front of "nonwhite" captures the average difference in the log of wages between nonwhite and white individuals, while holding other variables constant. A positive coefficient indicates that, on average, nonwhite individuals earn more than white individuals when all other factors are accounted for. Conversely, a negative coefficient would imply that nonwhite individuals earn less, on average.

5. To manually test the null hypothesis that one more year of education leads to a 7% increase in wage at a 5% significance level, we would need to examine the coefficient for "educ" and perform a t-test. We would compare the estimated coefficient to 0.07 (representing the 7% increase) and assess if it is statistically different from zero at the 5% significance level.

6. To test the same null hypothesis using Stata commands, we can run the following regression:

reg log(wage) educ

test educ = 0.07

The "reg" command performs the regression, and the "test" command conducts the hypothesis test. The test result will indicate whether the coefficient for education is significantly different from 0.07 at the 5% level.

7. To manually test the null hypothesis that gender does not matter against the alternative that women are paid lower ceteris paribus at a 5% significance level, we would need to assess the coefficient for "female." If the coefficient is significantly negative, it would provide evidence in support of the alternative hypothesis, suggesting that women are paid lower wages compared to men when other variables are held constant.

Learn more about: Wage

brainly.com/question/32783105

#SPJ11

The two methods used to search for exoplanets are the transit method (IF) and the radial velocity method (RV).

The transit method, also known as the IF method, involves detecting exoplanets by observing the slight dimming of a star's light when a planet passes in front of it. This method relies on the alignment of the observer, the star, and the exoplanet, creating a temporary eclipse-like event. By measuring the periodic dips in the star's brightness, scientists can infer the presence and characteristics of an exoplanet. This method is particularly effective for detecting large exoplanets that orbit close to their host stars, as they cause more significant drops in brightness. However, it is less effective for smaller exoplanets or those with longer orbital periods.

On the other hand, the radial velocity method (RV) detects exoplanets by measuring the slight wobble of a star caused by the gravitational tug of an orbiting planet. As the exoplanet orbits, its gravitational pull causes the star to move back and forth in space, resulting in a periodic shift in the star's light spectrum. By carefully analyzing these changes in the star's radial velocity, scientists can determine the presence and properties of an exoplanet, such as its mass and orbital period. This method is particularly useful for detecting massive exoplanets that are located farther away from their host stars.

Learn more about exoplanets

brainly.com/question/30792669

#SPJ11

The correct option is (A) Hardware.

Hardware consists of all the electronic and mechanical parts used in computers. It encompasses everything that is physically present on a computer system, such as the CPU, RAM, hard drive, motherboard, keyboard, and mouse. It is the foundation on which software applications are built, providing the processing power, memory, and storage capacity needed to run software programs.

In computing, hardware is the collection of all the physical components that make up a computer system. This includes items such as the keyboard, mouse, monitor, CPU, hard drive, memory, and any other components that are necessary for a computer to function.

To know more about Hardware refer to:

https://brainly.com/question/3186534

#SPJ11

Shonda should avoid the all-channel network structure. Option D is the correct answer.

The all-channel network structure is characterized by every member of the group being connected to every other member. While this type of structure may seem ideal for speedy decision-making due to its high connectivity, it often leads to information overload, decreased efficiency, and difficulty in reaching a consensus. With too many channels of communication, it can be challenging to manage the flow of information and make decisions quickly.

On the other hand, the wheel network structure has a central person who controls the flow of information and decision-making, which can streamline the process. The chain network structure involves linear communication between members, allowing for efficient transmission of information. Both of these structures offer more focused communication channels compared to the all-channel structure.

Therefore, Shonda should avoid the all-channel network structure. Option D is the correct answer.

You can learn more about communication channels at

https://brainly.com/question/848260

#SPJ11

The option "Forwarding the original request with a "?" in the new message body" is not a good approach to following up on an unanswered request.

When following up on an unanswered request, it is important to use effective and appropriate approaches to increase the chances of receiving a response. Modifying the subject line to indicate you are following up can be helpful as it draws attention to the request and highlights its importance. Editing down the content of the original request to simplify can also be a good approach, as it makes the message more concise and easier to understand. Offering alternate modalities for a reply is another effective strategy, as it provides flexibility for the recipient to respond through different channels such as email, phone, or in-person.

This increases the chances of getting a response by accommodating the recipient's preferred communication method. However, forwarding the original request with a "?" in the new message body may not be effective. It can come across as repetitive and may not provide any new information or incentive for the recipient to respond. It's generally better to provide additional context or clarification in the follow-up message rather than simply resending the original request.

Learn more about communication method here:

https://brainly.com/question/30490482

#SPJ11

The correct answer is a. dual channel. This can lead to improved system performance, especially in tasks that involve a significant amount of memory operations.

Dual channel memory technology allows two memory modules to be accessed simultaneously, thereby increasing the overall memory bandwidth. It works by using two memory channels to transfer data between the memory modules and the memory controller, effectively doubling the data transfer rate compared to a single-channel configuration.                          

      effectively doubling the memory bandwidth. It is commonly used in modern computers to improve system performance by allowing parallel data transfer between the memory modules and the CPU.

Learn more about memory modules here:

https://brainly.com/question/31567696

#SPJ11

The data dictionary component is used to create and maintain the data dictionary.

A data dictionary is a collection of metadata that includes definitions of all data elements (entities, attributes, and relationships) and data structures (tables and columns) in an information system or application. It also includes data elements and structures' storage and retrieval characteristics, security, and integrity criteria. It can also include additional information such as purpose, scope, and quality, as well as user manuals and application program descriptions.

A data component is a computer component that allows you to store and retrieve data. It is usually a physical or logical abstraction that holds data on a computer system and interacts with data or information. A computer system includes hardware components such as storage devices, input/output devices, and memory. Also, software components that work together to perform tasks and carry out functions of the system.

Learn more about data dictionary here: https://brainly.com/question/8897251

#SPJ11

Tech B is correct regarding the question of ABS controls braking every time the brakes are applied and brake pedal pulsation. ABS is a computerized system in modern vehicles that prevents the wheels from locking up during hard braking, providing the driver with better control of the vehicle.

The ABS is activated only when the driver brakes hard, and the wheels are about to lock up. As a result, Tech A's assertion that ABS controls braking every time the brakes are applied is inaccurate, making him incorrect. During an ABS event, the brake pedal pulsates as Tech B correctly stated. The ABS prevents the wheel from locking up by rapidly engaging and releasing the brake, which creates a pulsing sensation in the brake pedal.

As a result, Tech B is correct in stating that during an ABS event, it is typical for the brake pedal to pulsate. Wheels can lock up in wet or slippery driving conditions, causing the driver to lose control of the vehicle. As a result, ABS has become a vital feature in modern vehicles, making it essential for technicians to have a good understanding of how it works and its advantages.

You can learn more about brakes at: brainly.com/question/4236794

#SPJ11

The CORRECT match for the person/party who needs the knowledge of ERP systems and its corresponding purpose is IT auditor – Design the processes and customizes them to meet the management’s requirements.

This is option A

The purpose of Enterprise Resource Planning (ERP) system is to provide a solution for efficient business management by integrating all the functions of an enterprise into a unified system. An IT auditor is responsible for designing the processes and customizing them to meet management's requirements.Therefore, option (a) is the correct answer.

So, the correct answer is A

Learn more about business processes at

https://brainly.com/question/15591589

#SPJ11

The error message "attempt to reference field of non-structure array" indicates that you are trying to reference a field in a variable that is not a structure array.

Here are some ways to fix this error:

1. Check if the variable is a structure array

To avoid this error, make sure that the variable you are referencing is a structure array. If it is not, you need to modify your code to create a structure array or use a different variable that is a structure array.

2. Use the correct syntax to reference a field in a structure array

When referencing a field in a structure array, use the dot notation. For example, if you have a structure array named "myStruct" with a field named "myField", you can reference the field like this: `myStruct.myField`. If you use the wrong syntax, such as `myStruct('myField')`, you will get the "attempt to reference field of non-structure array" error.

3. Make sure the field exists in the structure array

If the field you are trying to reference does not exist in the structure array, you will get the "attempt to reference field of non-structure array" error. Make sure that the field name is spelled correctly and that it exists in the structure array.

If the field does not exist, you need to modify your code to create the field or use a different field that exists in the structure array.

Learn more about the array at

https://brainly.com/question/32381178

#SPJ11