Each student selects a title/case study/mini project related to the mechanical engineering design and should comprise of essential elements of the modern industrial design through the latest works of literature/Magazines/site
visits/automation or innovative ideas in the area of Mechanical Engineering. Each student should design through auto desk/solid works and fabrication of a prototype model based on the knowledge acquired and exhibit the prototype model through the presentation before a panel of 2 examiners. The design system should be included gears, couplings, belts, and chain drives along with other essential components which are required for the prototype model.
This task is also intended to give a detailed presentation on the design and implementation of the selected topic of task 1 through Power Point presentation. The suggested structure of the presentation as follows.
The presentation should include the following sections.
(i) Introduction
(ii) List of Components with specification
(iii) Design and Fabrication supported with photographs and videos.
(iv) Results and discussion
(v) References –CCE Harvard Style

Answer:

According to the search results, the advantages of effective social networks for career success include all of the following except "access to private information".

Explanation:

The process flow chart is a quality tool that displays the steps in a process on a graph. Its visual representation of the process sequence aids in understanding, analyzing, and improving processes effectively.

The quality tool that displays the steps in a process on a graph is the process flow chart**. A process flow chart visually represents the sequential steps of a process, allowing for a clear understanding of the workflow. It is a valuable tool for analyzing and improving processes.

A process flow chart is a diagram that uses symbols and arrows to illustrate the various steps or activities involved in a process. It provides a visual representation of the sequence of events, inputs, outputs, decision points, and interactions within a process. By mapping out the process flow, it becomes easier to identify bottlenecks, inefficiencies, and areas for improvement.

The purpose of using a process flow chart is to visually communicate the entire process, from start to finish, in a concise and structured manner. It helps stakeholders, such as team members, managers, or external auditors, to understand the process, identify potential areas of concern, and suggest improvements. Process flow charts are commonly used in quality management, process improvement initiatives like Lean Six Sigma, and project management.

In summary, the **process flow chart** is a quality tool that displays the steps in a process on a graph. Its visual representation of the process sequence aids in understanding, analyzing, and improving processes effectively.

Learn more about graph here

https://brainly.com/question/29892828

#SPJ11

Presidents are limited to two full terms in office by the Twenty-Second Amendment to the United States Constitution.


The Twenty-Second Amendment was ratified in 1951 and officially limited the number of terms a president could serve. The amendment was passed following the four-term presidency of Franklin D. Roosevelt, who was elected for his fourth term in 1944 but died shortly after.
Before the amendment, there was no limit to the number of terms a president could serve, and many presidents had sought third or even fourth terms in office. After the passage of the amendment, no president has served more than two full terms, though some have served less due to resignation or impeachment.
The amendment helps ensure a democratic system of government by preventing any one individual from having too much power and control over the presidency.


Lear more about  Twenty-Second Amendment here,
https://brainly.com/question/3268023

#SPJ11

The spherical sausages need approximately 19.35 hours to reach the same average concentration of smoke compound.

To find the time needed to smoke the spherical sausages, we should understand that the diffusion rate is proportional to the surface area-to-volume ratio.

For the cylindrical sausage, volume Vc = π(1.25^2)(20) and surface area Ac = 2π(1.25)(20) + 2π(1.25^2).

For the spherical sausage, Vs = Vc and surface area As = 4π(rs^2), where rs is the radius.

The smoking time is inversely proportional to the surface area-to-volume ratio.

Solve for rs using Vs, calculate As/Vs and Ac/Vc, and use the ratio (Ac/Vc)/(As/Vs) multiplied by the cylindrical smoking time (11 hours) to find the spherical smoking time.

For the cylindrical sausage, Vc = 3.14 * (1.25^2) * 20 = 98.175 cm³ and Ac = 2 * 3.14 * 1.25 * 20 + 2 * 3.14 * (1.25^2) = 159.79 cm².

The spherical sausage radius rs = (3*Vc/4π)^(1/3) = 2.69 cm, and As = 4 * 3.14 * (2.69^2) = 91.08 cm².

The smoking time for the spheres is (Ac/Vc)/(As/Vs) * 11 hours = 11 * (159.79/98.175)/(91.08/98.175) = 19.35 hours.

The spherical sausages need approximately 19.35 hours to reach the same average concentration of smoke compound.

Read more about time here:

https://brainly.com/question/26046491

#SPJ1

The speed of an AC induction motor is determined by the frequency of the alternating current (AC) supply and the number of magnetic poles in the motor.

What is an AC induction motor?

An AC induction motor is an electric motor that is driven by alternating current (AC).

It works by using electromagnetic induction to convert electrical energy into mechanical energy.

The AC induction motor is one of the most common types of electric motor used today.

It is used in a wide range of applications, from household appliances to heavy industrial machinery.

The speed of an AC induction motor can be varied by changing the frequency of the AC supply.

However, the number of magnetic poles in the motor is fixed and determines the maximum speed of the motor.

The formula for the synchronous speed (Ns) of an AC induction motor is:

Ns = 120f / P

where f is the frequency of the AC supply in hert z, and P is the number of magnetic poles in the motor.

The actual speed of the motor is slightly less than the synchronous speed due to the effect of slip.

To know more about speed visit:

https://brainly.com/question/6280317

#SPJ11

Reflexes are primarily governed by a part of the brain called the spinal cord. The spinal cord is an extension of the central nervous system and serves as a communication pathway between the brain and the rest of the body. It plays a crucial role in coordinating reflex actions.

When a sensory stimulus is detected by receptors in the body, such as touch or pain, the sensory information travels through sensory neurons to the spinal cord. Within the spinal cord, the information is quickly processed through local circuits known as reflex arcs. These reflex arcs involve interneurons within the spinal cord that can initiate an immediate motor response without requiring input from the brain.

This rapid response is crucial for survival and protection. For example, when you touch a hot object, the sensory information quickly reaches the spinal cord, and the reflex arc causes an automatic withdrawal of your hand to prevent further injury. This reflex action occurs before the sensory information even reaches the brain.

While the spinal cord governs reflex actions, the brain also plays a role in modulating and coordinating reflexes. Higher brain regions, particularly the brainstem and certain areas of the cerebral cortex, can influence and modify reflex responses. They can enhance or inhibit reflex actions based on the context and the individual's state.

In summary, reflexes are primarily governed by the spinal cord, which houses local circuits known as reflex arcs. These reflex arcs allow for quick and automatic responses to sensory stimuli without requiring input from the brain. However, the brain also has the ability to modulate and coordinate reflex actions through higher brain regions.

Learn more about brain:

https://brainly.com/question/1247675

#SPJ11

(f) Burn duration: Calculate using mass flow rate and change in velocity.

(a) (i) The effective exhaust velocity refers to the average velocity of the exhaust gases relative to the rocket or spacecraft. It takes into account the combined effects of the exhaust velocity and the rocket's velocity. The effective exhaust velocity determines the efficiency of the propulsion system and is a crucial parameter in calculating the thrust and specific impulse of the rocket.

(b) (i) The change of velocity, Δv, of the spacecraft after ejecting a small mass of propellant can be calculated using the principle of conservation of momentum. The equation is given by:

Δv = v * (Amp / m)

(ii) By passing to infinitesimal values and integrating the obtained differential equation, we can derive Tsiolkovsky's equation. The equation relates the change in velocity (Δv) to the specific impulse (Isp) and the natural logarithm of the initial mass (m0) to the final mass (mf) ratio. The equation is given by:

Δv = Isp * g * ln(m0 / mf)

(c) (i) Two possible definitions of specific impulse are:

1. Specific impulse is the ratio of the thrust produced by a propulsion system to the weight flow rate of the propellant.

2. Specific impulse is the time rate of change of momentum per unit mass flow rate of the propellant.

(ii) In the term "specific impulse," the word "specific" refers to the value per unit mass of propellant, indicating a measurement normalized by the mass of propellant used. The word "impulse" refers to the change in momentum of the rocket per unit mass of propellant consumed.

(iii) The definition of specific impulse as the ratio of thrust to the weight flow rate of propellant (thrust divided by weight flow rate) is more often used. This definition is more practical and directly relates the thrust produced to the propellant consumption rate, making it easier to compare different propulsion systems.

Learn more about velocity here

https://brainly.com/question/21729272

#SPJ11

A country that has a comparative advantage in a product is a country that can produce a good or service at a lower opportunity cost than another country.

What is comparative advantage?

Comparative advantage is a concept in economics that states that a country can gain from specializing in producing goods and services that it can produce at a lower opportunity cost than another country.

Opportunity cost is the value of the next best alternative that must be given up in order to produce something.

In other words, if a country has a lower opportunity cost of producing a good or service, then it has a comparative advantage in producing that good or service.

This means that the country can produce the good or service at a lower cost than another country, which makes it more efficient and competitive in the global market.

To know more about product visit:

https://brainly.com/question/31812224

#SPJ11

Predictive analytics is used for all of the following except the act of forecasting and predicting future outcomes, occurrences, and trends.

Predictive analytics, also known as data mining, is a statistical technique for evaluating data to recognize patterns or relationships that can be used to predict future outcomes.

Predictive analytics helps businesses make better, data-driven decisions by analyzing current and historical data to predict future trends and behaviors.

This can help companies predict future market trends, analyze customer behaviors, and identify potential risks or opportunities.

Predictive analytics is useful for all of the following:

Optimizing marketing campaigns

Forecasting sales demand

Predicting customer behavior Identifying potential fraud risks

Predictive analytics is useful for any company that wants to gain a competitive advantage by making data-driven decisions.

To know more about occurrences visit:

https://brainly.com/question/31608030

#SPJ11

The horizontal component of force exerted by pin A on member ABCD is zero, and the vertical component is 65 lb upward.

The horizontal component of force exerted by pin B on member ABCD is zero, and the vertical component is 65 lb downward.

The horizontal component of force exerted by pin C on member ABCD is zero, and the vertical component is 65 lb.

In this system, the forces acting on member ABCD are determined by the pin connections at points A, B, and C. Since the slot in member ECF is smooth, it does not exert any forces on member ABCD. Let's analyze each pin separately:

Part 1) Pin A is attached to member ABCD at point A. Since the slot in member ECF is smooth, there is no horizontal force acting on member ABCD at point A. The vertical component of the force exerted by pin A is equal to the weight of the system, which is 65 lb upward.

Part 2) Pin B is attached to member ABCD at point B. Similar to pin A, there is no horizontal force exerted by pin B on member ABCD. However, the vertical component of the force exerted by pin B is equal to the weight of the system, which is 65 lb downward. The direction is downward because pin B is positioned below the center of gravity.

Part 3) Pin C is attached to member ABCD and passes through the smooth slot in member ECF. As with pins A and B, there is no horizontal force exerted by pin C on member ABCD. The vertical component of the force exerted by pin C is equal to the weight of the system, which is 65 lb.

Learn more about Horizontal

brainly.com/question/31369263

#SPJ11

As the skin of the elderly becomes thinner and less elastic, they become more susceptible to skin infections. Skin infections in the elderly can be caused by a variety of factors, including poor hygiene, decreased immunity, and chronic medical conditions.

Aging is associated with changes in the immune system that can make it more difficult for the elderly to fight off infections. The skin is the first line of defense against external infections, but changes in the skin due to aging can make it easier for pathogens to penetrate. In addition, many elderly people have underlying medical conditions that can increase their risk of skin infections, such as diabetes, peripheral vascular disease, and cancer.The use of medications can also increase the risk of skin infections in the elderly.
Some medications can cause dry skin or rashes, while others can suppress the immune system and make it more difficult for the body to fight off infections. For example, long-term use of antibiotics can lead to the development of antibiotic-resistant strains of bacteria that can cause serious skin infections.
The elderly should take special care to maintain good hygiene, avoid exposure to pathogens, and seek medical attention promptly if they develop skin infections. Skin infections can be more difficult to treat in the elderly, so it is important to take preventive measures to reduce the risk of infection.

Learn more about skin infections here,
https://brainly.com/question/7656575

#SPJ11

The stream of smoke is released from a single point upstream of a wind turbine as the turbine is spinning to visualize the flow through the turbine. Will the smoke draw.

An interface between a liquid and a gas onlyiv. A solid body completely immersed in a liquidAns: iii. An interface between a liquid and a gas onlyd. Cavitation can occur in a flow of liquid when:i. The pressure is raised above the vapor pressure at some point in the flowii. The flow is brought to rest at some point in the flowiii. There is no flow so hydrostatics can be appliediv. The pressure is lowered below the vapor pressure at some point in the flowAns: iv. The pressure is lowered below the vapor pressure at some point in the flow.e. Internal energy and enthalpy are the same quantity.i. False. Enthalpy does not account for heat but internal energy does.ii. False. Enthalpy is the internal energy plus a contribution from pressure.iii. True.iv. False. Enthalpy is a property of a gas only, internal energy applies to both gases and liquids.Ans: ii. False. Enthalpy is the internal energy plus a contribution from pressure.f. The flow of water over a flat plate is measured, and a velocity profile of u = Ue(y + 1)² - 5 is observed, where Uo is the speed of the flow approaching the plate, and y is the distance away from the plate. If the flow speed U = 5ms, the shear stress on the flat plate is 0.12 N/m²

Newtonian fluid like air or water, shear stress is linearly proportional to the strain rate; Surface tension occurs whenever there is an interface between a liquid and a gas only. Cavitation can occur in a flow of liquid when the pressure is lowered below the vapor pressure at some point in the flow.

Learn more about internal energy here:

brainly.com/question/11742607

#SPJ11

The server core installation option in Windows Server 2012 R2 effectively removes the Graphical User Interface (GUI).

This option is ideal for servers that require a minimal footprint and where the administration of the server is done remotely via the command line interface or PowerShell.

There are two installation options for Windows Server 2012 R2: Server Core and Server with a GUI.

The Server with a GUI installation option includes the Graphical User Interface (GUI), which makes it easier for users to manage the server through a graphical interface.

However, the GUI requires more resources and has a larger attack surface than the Server Core installation option.

The Server Core installation option is a minimal installation option that removes the GUI and other features that are not required for server functionality.

In conclusion, the server core installation option in Windows Server 2012 R2 effectively removes the GUI and other unnecessary features to create a smaller attack surface and more efficient use of server resources.

To know more about Graphical User Interface, visit:

https://brainly.com/question/10247948

#SPJ11

The temperature at the interface between the wood and cork when the cork is on the inside and the wood is on the outside is 0 °C.

Similarly, the temperature at the interface between the wood and cork when the wood is on the inside and the cork is on the outside is 20 °C.

It is concluded that the temperature difference between the two sides of the wood will be 20°C and the direction of the heat will be from higher temperature to the lower temperature side.

It does matter whether the cork is placed on the inside or the outside of the wooden box.

This is because the temperature at the interface between the wood and cork changes depending on the positioning of the cork.

When the cork is on the inside and the wood is on the outside, the temperature at the interface is 0 °C, while when the wood is on the inside and the cork is on the outside, the temperature at the interface is 20 °C.

To know more about temperature, visit:

https://brainly.com/question/7510619

#SPJ11

The temperature difference between the inner surface and point 1 is given by: T0-T1= Q1 R1Here, Q1 is the rate of heat transfer per unit area through material A, and R1 is the thermal resistance of material A between the inner surface and point 1.

So the rate of heat transfer per unit area through material A can be determined as follows:Q1 = [1.5 * 10^6] / 1000 Q1 = 1500 W/m2The thermal resistance of material A between the inner surface and point 1 is given by:R1 = L1 / (k1 A1)R1 = 0.05 / (75 × 0.01)R1 = 0.0667 K/WSo,T0-T1 = 1500 × 0.0667= 100.05 K Temperature difference between points 1 and 2 is given by: T1-T2 = Q2 R2 Here, Q2 is the rate of heat transfer per unit area through material B, and R2 is the thermal resistance of material B between points 1 and 2. The rate of heat transfer per unit area through material B can be determined as follows:Q2 = h × (T1-T∞)Q2 = 1000 × (T1 - 30)Q2 = 1000T1 - 30000 W/m2The thermal resistance of material B between points 1 and 2 is given by:R2 = L2 / (k2 A2)R2 = 0.02 / (150 × 0.01)R2 = 0.0133 K/WSo,T1-T2 = (1000T1 - 30000) × 0.0133= 13.33T1 - 399 KThis equation can be re-arranged to give:T1 = (399 + T2) / 1.0133Thus, T0 - T1 = 100.05 KT1 - T2 = 13.33T1 = (399 + T2) / 1.0133By substituting the second equation into the first equation, we can obtain an expression for T0 in terms of T2 as follows:T0 - [(399 + T2) / 1.0133] = 100.05KT0 = (399 / 1.0133) + 100.05T2K = 457.95 + 99.069T2Therefore, the temperatures To, T1, and T2 can be determined as follows :To = 457.95 °C T1 = 409.5 °C T2 = 30 + (13.33 × 0.01)T2 = 30.133 °CPart  materials are represented by the lengths of the arrows. The direction of heat flow is indicated by the arrows, and the rate of heat flow is indicated by the thickness of the arrows.

The temperatures of the inner surface of material A, the surface between materials A and B, and the cooled surface were determined to be 457.95 °C, 409.5 °C, and 30.133 °C, respectively. The temperature distribution in the composite wall under steady-state conditions was also sketched.

Learn more about thickness here:

brainly.com/question/33408148

#SPJ11

The average typing speed for a college student is approximately 40 words per minute (WPM).

Typing speed is the measure of the typing skills of an individual expressed in words per minute (WPM). As a result, the typing speed of an individual is a function of their age, education, proficiency in the language of instruction, and other factors. The following are some possible average typing speeds based on age groups:

Adults: The average typing speed for an adult is about 40 WPM.

College students: The average typing speed for a college student is about 40 WPM.

High school students: The average typing speed for high school students is around 35 WPM.

Elementary school students: The average typing speed for elementary school students is roughly 20 WPM.

These figures are, of course, average numbers, and people with different skill levels can type slower or faster than these speeds. As a result, if you're curious about your own typing speed, you can use an online typing test to get an accurate assessment of your abilities.

To know more about WPM refer to:

https://brainly.com/question/30290068

#SPJ11

Group symbol: GW-GC. Group name: Well-graded gravel with clay. The "GW" represents a well-graded gravel, indicating a well-graded coarse-grained soil. The "GC" indicates the presence of clay.

To classify the soil based on the Unified Soil Classification System (USCS) using the given information, we need to consider the particle size distribution, plasticity characteristics, and other relevant parameters.

Given:

Percent passing No. 4 (4.75 mm) sieve: 46%

Percent passing No. 200 (0.075 mm) sieve: 4%

Coefficient of gradation (Cc): 7.0

Uniformity coefficient (Cu): 4.7

Liquid Limit (LL): 53

Plastic Limit (PL): 16

1. Determine the soil's grain-size classification:

Based on the percentages passing the No. 4 and No. 200 sieves, the soil falls into the following categories:

- More than 50% passing the No. 200 sieve: Fine-grained soil

- Less than 50% passing the No. 4 sieve: Coarse-grained soil

2. Determine the soil's gradation:

The coefficient of gradation (Cc) and uniformity coefficient (Cu) indicate the soil's gradation. In this case, Cc is greater than 1 and Cu is less than 4, indicating a well-graded soil.

3. Determine the soil's plasticity:

By comparing the Liquid Limit (LL) and Plastic Limit (PL), we can determine the soil's plasticity. The plasticity index (PI) is calculated as follows:

PI = LL - PL

PI = 53 - 16

PI = 37

4. Classify the soil:

Based on the provided information, the soil can be classified as follows:

Group symbol: GW-GC

Group name: Well-graded gravel with clay

The "GW" represents a well-graded gravel, indicating a well-graded coarse-grained soil. The "GC" indicates the presence of clay.

To summarize:

Group symbol: GW-GC

Group name: Well-graded gravel with clay

Learn more about soil here

https://brainly.com/question/14571202

#SPJ11

The process involved in changing the sales tax rate in quickbooks are;

Accounting, inventory, payroll, tax preparation, invoicing, bank account tracking and reconciliation, cost management, budgeting, payment processing, and management of accounts receivable and payable are all included in the full-featured QuickBooks business and financial management suite.

Learn more about  quickbooks  at;

https://brainly.com/question/30033265

#SPJ1

The principal stresses in the given plane stress state are 80 MPa and -100 MPa, and the orientation of the planes in which they act is 45 degrees relative to the x-axis. The maximum shear stress is 100 MPa, and it acts on a plane inclined at 45 degrees relative to the x-axis.

In a plane stress state, the stress components can be represented by a Mohr's circle. To draw the Mohr's circle, we plot the stress components on the circle. The x-axis represents the normal stresses, and the y-axis represents the shear stresses. The given stress components are Ox = 60 MPa, Oy = -20 MPa, and Txy = -40 MPa.

To find the principal stresses, we locate the points corresponding to Ox and Oy on the Mohr's circle. The distance between these points represents the magnitude of the principal stresses. The midpoint of this line gives the average stress, which is the average of the two principal stresses. The angle between the x-axis and this line represents the orientation of the principal stresses.

From the Mohr's circle, we determine that the principal stresses are 80 MPa and -100 MPa. The orientation of the planes in which these stresses act can be found by drawing a line at 45 degrees relative to the x-axis, passing through the center of the circle. The intersection points of this line with the circle represent the orientation of the planes.

To calculate the maximum shear stress, we use the formula: maximum shear stress = (1/2) * difference between the two principal stresses. In this case, the maximum shear stress is 100 MPa. The orientation of the plane in which this shear stress acts can be determined by drawing a line perpendicular to the line representing the average stress and passing through the center of the circle.

In summary, the principal stresses in the given plane stress state are 80 MPa and -100 MPa, and they act on planes inclined at 45 degrees relative to the x-axis. The maximum shear stress is 100 MPa, and it acts on a plane inclined at 45 degrees relative to the x-axis.

Learn more about shear stress

brainly.com/question/20630976

#SPJ11

The correct formula specified by ASME B31.3 for straight pipe design is option 1) P-1/2-t-s/D.

This formula is used to calculate the minimum required wall thickness of process piping based on various parameters.

In the formula, P represents the internal design gauge pressure, which is the pressure exerted on the inside of the pipe.

The term 1/2*t represents half of the specified wall thickness of the pipe, ensuring that the pipe can withstand the internal pressure.

The term s represents the allowable stress of the pipe material, indicating the maximum stress the material can handle.

Lastly, D represents the outside diameter of the pipe, which is used to normalize the design equation.

By using this formula, engineers can determine the appropriate wall thickness for process piping to ensure its structural integrity and safe operation under given pressure conditions.

to learn more about ASME

https://brainly.com/question/31834357

#SPJ11

The correct statement is that in transparent mode, FortiGate acts as a Layer 3 device, handling traffic at the data link layer while maintaining the original IP addressing and network topology.

Which of the following statements about FortiGate operating in transparent mode is true?

a) In transparent mode, FortiGate acts as a Layer 3 device.

b) Transparent mode requires IP addresses for each interface.

c) FortiGate in transparent mode can perform NAT and PAT.

d) Transparent mode requires configuring virtual IP addresses.

The correct answer is a) In transparent mode, FortiGate acts as a Layer 3 device.

When FortiGate operates in transparent mode, it acts as a Layer 2 firewall. This means that it functions at the data link layer (Layer 2) of the OSI model and does not participate in routing decisions. Instead, it operates transparently between network segments, allowing the traffic to flow through it without altering IP addresses.

In transparent mode, FortiGate does not require IP addresses for each interface. It operates based on MAC addresses, using Layer 2 switching to forward traffic between networks.

Transparent mode does not support Network Address Translation (NAT) or Port Address Translation (PAT). Its primary function is to provide security services, such as firewalling and intrusion prevention, without altering the network topology or IP addressing scheme.

Virtual IP addresses are not required for FortiGate operating in transparent mode. Virtual IP addresses are typically used in NAT mode to map public IP addresses to internal private IP addresses.

Therefore, the correct statement is that in transparent mode, FortiGate acts as a Layer 3 device, handling traffic at the data link layer while maintaining the original IP addressing and network topology.

Learn more about transparent here

https://brainly.com/question/29678708

#SPJ11

a) The factor of safety used in the design, assuming that the material is a Tresca material is 5.33

b) The factor of safety used in the design, assuming that the material is a Von Mises material is 2.67.

Given data:

Ox= 135 MPa

Txy = 75 MPa,

yield stress of the material in uniaxial tension test is 400 MPa

(a) The factor of safety used in the design, assuming that the material is a Tresca material:

We know that the stress components that exist in the given structure can be shown using Mohr's circle as shown below:

Ox = 135 MPa,

Txy = 75 MPa,

Tyx = -75 MPa

As we know, For Tresca material, Maximum shear stress theory is applicable.

σ1 - σ2 ≤ f/2

σ1= Ox + Tyx/2

= 135 + (-75)/2

= 97.5 MPa

σ2 = Ox - Tyx/2

= 135 - (-75)/2

= 172.5 MPa

The factor of safety is the ratio of yield strength to the maximum shear stress.

So, Factor of safety (FOS) = Yield strength / Maximum shear stress

                                           = 400 / (172.5-97.5)/2

                                           = 400 / 75= 5.33

The factor of safety used in the design, assuming that the material is a Tresca material is 5.33

(b) Assuming the material is a Von Mises material:

For Von-Mises material, the criterion is given by the equation:

σ_eq = √[σ_x^2 + σ_y^2 - σ_x.σ_y + 3τ^2]

where

σ_x and σ_y are the normal stresses acting on the element,

τ is the shear stress acting on it.

So,

σ_eq = √[135^2 + 0 + 75^2 + 3(0.5(-75))^2]

= 150 MPa

The factor of safety is the ratio of yield strength to the equivalent stress.

So, Factor of safety (FOS) = Yield strength / Equivalent stress

                                           = 400 / 150 = 2.67

The factor of safety used in the design, assuming that the material is a Von Mises material is 2.67.

From the above calculations, it is clear that the factor of safety used in the design assuming Tresca material is higher than the factor of safety used in the design assuming Von-Mises material. This is due to the difference in the failure theories used for Tresca and Von-Mises materials.

To know more about Shear stress, visit:

https://brainly.com/question/31562842

#SPJ11

Answer:

According to OSHA regulations, it is not acceptable to stand under a suspended load at any time . However, one of the search results mentions a multiple-choice question asking how many seconds it is acceptable to stand under a suspended load , with the options being 0, 1, 2, or 3 seconds. This question is likely a test question to ensure that workers understand the danger of working under suspended loads, and the correct answer is 0 seconds.

Explanation:

The three common tasks performed by operating systems are managing memory, managing files, and managing processes.

An operating system is a program that allows for the management and interaction of the computer's hardware and software.

Its primary function is to provide a user interface and allow for the allocation and management of computer resources.

The three common tasks performed by operating systems are discussed below:

1. Management of Memory:

An operating system is responsible for managing the computer's memory.

It allocates memory to applications as required and recovers unused memory when it is no longer required.

Operating systems maintain a virtual memory system that allows users to access more memory than is physically available.

Virtual memory is used to swap data between RAM and hard disk drives to optimize the use of memory.

2. Management of Files:

An operating system manages files, folders, and directories on a computer.

It provides a file system that allows users to access files and store them in a structured manner.

It also provides tools for managing files such as copying, renaming, deleting, and creating files.

Operating systems also provide disk management tools to format disks and partition drives.

3. Management of Processes:

Operating systems manage processes, which are instances of a program running on a computer.

An operating system schedules processes to run based on the availability of resources such as memory and CPU time.

It also manages the communication between processes and provides tools for monitoring the performance of processes.

Operating systems are essential components of modern computing systems. They provide a platform for running applications and interacting with hardware devices.

To know more about operating systems, visit:

https://brainly.com/question/29532405

#SPJ11

Currency options are commonly traded through the over-the-counter (OTC) system.

The OTC system refers to a decentralized marketplace where financial instruments, including currency options, are traded directly between two parties, typically facilitated by brokers or dealers. Unlike exchange-traded options, which are standardized and traded on formal exchanges, OTC options provide more flexibility in terms of contract terms and customization.

In the OTC system, buyers and sellers negotiate and agree upon the specific terms of the currency options, such as the strike price, expiration date, and contract size. These agreements are typically tailored to meet the specific needs and requirements of the parties involved. The OTC market allows for more customized and complex option structures, providing participants with greater flexibility in managing their currency risk.

One of the advantages of trading currency options through the OTC system is the ability to access a wide range of currency pairs. Market participants can trade options on major currencies, such as the US dollar, euro, yen, or pound, as well as exotic currency pairs. Additionally, the OTC market offers more privacy and confidentiality compared to exchange-traded options.

It's important to note that while the OTC system offers flexibility and customization, it also entails counterparty risk. Participants must carefully evaluate the creditworthiness and reputation of the counterparties they engage with in OTC transactions.

In summary, currency options are commonly traded through the **over-the-counter (OTC)** system, which provides a decentralized marketplace for customized and flexible option contracts between two parties. The OTC system offers greater flexibility in terms of contract terms and a wider range of currency pairs, but it also involves counterparty risk that should be carefully managed.

Learn more about Currency here

https://brainly.com/question/33172853

#SPJ11

(a) [A+] decreases, [B+] increases. (b) Ecell decreases as reactions approach equilibrium. (c) [A+]/[B+] is determined by stoichiometry and standard electrode potentials. (d) No, Ecell cannot be less than Eºcell for spontaneous reactions.

(a) As the cell operates, the concentrations of [A+] and [B+] will change. In the A/A+ half-cell, the A metal electrode is negative, so A+ ions are being reduced and deposited onto the electrode, leading to a decrease in [A+]. In the B/B+ half-cell, the B metal electrode is positive, so B+ ions are being oxidized and released into the solution, resulting in an increase in [B+]. These changes in concentration occur to maintain electrical neutrality within the cell.

(b) Ecell, the cell potential, is a measure of the difference in electrode potentials between the two half-cells. As the cell operates, the concentrations of [A+] and [B+] change, and this affects the electrode potentials. The change in concentration of A+ ions will shift the equilibrium of the A/A+ half-cell reaction, altering the electrode potential. Similarly, the change in concentration of B+ ions will influence the electrode potential of the B/B+ half-cell. Consequently, as the concentrations change, Ecell will also change.

(c) When Ecell = Eºcell, the cell is at equilibrium. At this point, the electrode potentials of the two half-cells are equal, and there is no net flow of electrons. The concentrations of [A+] and [B+] have reached values that balance the electrode potentials and satisfy the Nernst equation. The ratio of [A+]/[B+] at equilibrium will depend on the stoichiometry of the half-cell reactions and the standard electrode potentials of the cells.

(d) No, it is not possible for Ecell to be less than Eºcell. Eºcell represents the standard cell potential, which is the cell potential under standard conditions of 1 M concentrations for all species and 1 atm pressure. Ecell is influenced by the concentrations of reactants and products through the Nernst equation. However, even with changes in concentration, Ecell will still be greater than Eºcell, as long as the cell is operating under non-standard conditions. The Nernst equation ensures that Ecell adjusts to maintain a positive value, indicating a spontaneous redox reaction.

Learn more about equilibrium here

https://brainly.com/question/12977920

#SPJ11

The correct answer is: they both accumulate production costs by department

Explanation: Process costing refers to the costing system that is used in industries that manufacture a homogeneous product.

Process costing refers to a costing system that is used in industries that manufacture a homogeneous product.

The costs of each process or stage of the manufacturing process are tallied, then allocated to the product produced in that period, resulting in a per-unit cost of production.

An instance of process costing is the production of sugar.

Operations costing is a type of costing system that is used in industries that manufacture a range of goods that require similar processes.

Unlike process costing, which tallies the cost of production for each process, operation costing tallies the cost of production by the department.

The costs of each process or stage of the manufacturing process are tallied, then allocated to the product produced in that period, resulting in a per-unit cost of production.

An instance of operation costing is the manufacturing of clothing.

To know more about manufacturing visit:

https://brainly.com/question/29489393

#SPJ11

The number of vacancies per cubic meter in gold at 900°C is 2.04 x 10²².

This means that at high temperatures, the number of vacancies in a metal increases due to the increased energy available for atoms to move around and create empty spaces.

To find the number of vacancies per cubic meter in gold at 900°C, we can use the following formula:

n/V = exp(-Qv / (kT))

where:

n/V = number of vacancies per cubic meter

Qv = energy for vacancy formation

k = Boltzmann's constant

T = absolute temperature in Kelvin

The first step is to convert the given temperature of 900°C to Kelvin by adding 273.15 to it.

900°C + 273.15 = 1173.15 K

Next, we need to find the value of Qv.

We are given that the energy for vacancy formation in gold is 0.98 eV/atom.

To convert this to joules per atom, we can use the conversion factor:

1 eV = 1.602 x 10⁻¹⁹ J

So,

0.98 eV/atom = 0.98 x 1.602 x 10⁻¹⁹ J/atom

                      = 1.57 x 10⁻¹⁹ J/atom

The atomic weight of gold is given as 196.9 g/mol.

This means that the mass of one gold atom is:

196.9 g/mol / 6.022 x 10⁻²³ atoms/mol = 3.27 x 110⁻²² g/atom

The density of gold at 900°C is given as 18.63 g/cm^3.

Using the density formula, we can find the volume of one gold atom:

18.63 g/cm³ = 18.63 x 10³ kg/m^3 (since 1 g/cm³ = 10³ kg/m³)

Volume of one gold atom = Mass of one gold atom / Density of gold

                                    = 3.27 x 10⁻²² g / 18.63 x 10³ kg/m³

                                     = 1.75 x 10⁻²⁵ m³

Now, we can substitute the given values into the formula for n/V:

n/V = exp(-Qv / (kT))

= exp(-1.57 x 10⁻¹⁹ J/atom / (1.38 x 10⁻²³ J/K x 1173.15 K))

= 2.04 x 10²² vacancies/m^3

So, the number of vacancies per cubic meter in gold at 900°C is 2.04 x 10²².

We can include the conclusion that at high temperatures, the number of vacancies in a metal increases due to the increased energy available for atoms to move around and create empty spaces.

To know more about energy , visit:

brainly.com/question/16182853

#SPJ11

Answer:

there are multiple problems related to bearing capacity and standard penetration tests for square foundations, but there is no information on the specific soil type or location. Therefore, it is not possible to determine the standard penetration blow count (n) for the given scenario. It is important to conduct a site investigation to determine the properties of the soil and perform the necessary tests to obtain accurate data for design purposes.

Explanation: