The contract between Charlie and Marty contains a condition precedent that suspends the obligation of Charlie to cut Marty's lawn in the event that the Toronto Blue Jays win the World Series. The condition precedent clause in the contract is enforceable under certain conditions.
The clause in the contract between Charlie and Marty is known as a condition precedent. A condition precedent is a condition that must be met before a contract obligation becomes effective. In this case, the clause stated that if the Toronto Blue Jays win the World Series, Charlie would no longer be required to cut Marty's lawn each week. The condition precedent clause is legally enforceable if the condition is met. In this case, if the Toronto Blue Jays win the World Series, the clause would become effective and Charlie would no longer be obligated to cut Marty's lawn. However, if the condition is not met, Charlie would still be required to cut Marty's lawn each week. It is important to note that the enforceability of a condition precedent clause depends on the wording of the clause and the specific circumstances of the contract. If the condition is impossible to fulfill or is against public policy, the clause may not be enforceable.
Learn more about enforceable here:
https://brainly.com/question/32631624
#SPJ1
Which of the following documents may not be part of the Project Management Plan? a. The process improvement plan b. The scope management plan c. The cost baseline d. The change log
The document that may not be part of the Project Management Plan is d) the Change log.
What is Project Management Plan?A project management plan is a formal document that outlines how a project will be carried out, monitored, and regulated. The plan may be tailored to the specific requirements of each project, and it may also be updated and altered as the project progresses. It comprises multiple components, including a description of the work to be done, how it will be done, and what resources will be required, as well as any constraints or risks that must be addressed.
The following documents are included in a project management plan:
The scope management planThe schedule management planThe cost management planThe quality management planThe process improvement planThe resource management planThe communication management planThe risk management planThe procurement management planThe stakeholder management planIn conclusion, The change log is the document that may not be part of the Project Management Plan.
Therefore, the correct answer is d) the Change log.
Learn more about project management plan here: https://brainly.com/question/22590420
#SPJ11
1. Suppose a firm has an outflow of $100,000 at time 0. Inflows of $20,000, $10,000 and $30,000 are effected during time 1, 2 and 3, respectively. If interest rate is 10% for the first two periods, and 8% for the third period, draw a timeline and illustrate the value of cash owe of the firm for each period.
2. (a) You have deposited $1,000 in your bank account that pays an interest rate 5% per year. Write an equation that shows how much money you will have at the end of 4th year if your deposit is under a fixed certificate.
(b) Why earn interest on an interest called compound interest?
(c) Briefly explain the equation, FV1 = PV + INT
1. Firm's cash flows: -100,000, 18,181.82, 8,264.46, 24,074.07 for periods 0, 1, 2, and 3 respectively. 2. (a) FV = PV * (1 + r)^n calculates future value of a fixed certificate deposit, where FV is future value, PV is initial deposit, r is interest rate, and n is number of periods. (b) Compound interest is interest earned on initial investment and previously earned interest. (c) FV1 = PV + INT represents future value (FV1) as sum of initial investment (PV) and interest earned (INT).
1. Timeline and value of cash flows:
Period | 0 1 2 3
---------------------------------------------
Cashflow | -100,000 20,000 10,000 30,000
---------------------------------------------
To calculate the value of the cash flows for each period, we need to discount them back to time 0 using the given interest rates.
Value of cash flow at time 0:
-100,000 (no discounting required as it is already at time 0)
Value of cash flow at time 1:
20,000 / (1 + 0.10)^1 = 18,181.82
Value of cash flow at time 2:
10,000 / (1 + 0.10)^2 = 8,264.46
Value of cash flow at time 3:
30,000 / (1 + 0.08)^3 = 24,074.07
The values represent the discounted present value of the cash flows at each respective period.
2. (a) The equation for calculating the future value (FV) of a fixed certificate deposit is:
FV = PV * (1 + r)^n
Where:
FV is the future value
PV is the present value or initial deposit
r is the interest rate per period
n is the number of periods
For the given case, the equation would be:
FV = 1,000 * (1 + 0.05)^4 = 1,215.51
(b) Earning interest on interest is called compound interest because the interest earned in each period is added to the initial deposit, and subsequent interest calculations are based on the new total amount (principal + previously earned interest). This leads to exponential growth of the investment over time.
(c) The equation FV1 = PV + INT represents the relationship between the future value (FV1) of an investment, the present value (PV) or initial investment amount, and the interest earned (INT). It shows that the future value is equal to the initial investment plus the interest earned on that investment.
Learn more about future value
https://brainly.com/question/30787954
#SPJ11
The federal Canada Business Corporations Act, requires at least of the directors of a federal corporation to be resident Canadians. 30% 25% 40% 50% QUESTION 24 An example of a bailment for reward is a rental agreement. This is so because: it is governed by the same standard as the resonable person standard in tort law the exchange between the parties is viewed as a consignment most owners of instruments are bailors there is consideration exchanged between the parties
Previous question
An example of a bailment for reward is a rental agreement because there is consideration exchanged between the parties. This exchange of consideration distinguishes it from other types of bailments and establishes the contractual relationship between the parties.
In a bailment for reward, one party (the bailor) transfers possession of personal property to another party (the bailee) in exchange for some form of consideration. A rental agreement is an example of a bailment for reward because the individual renting the property (the bailee) pays a fee or consideration to the owner (the bailor) in exchange for the temporary possession and use of the property.
The consideration exchanged in a rental agreement is typically the rental payment. The bailee receives the right to use and possess the property, while the bailor receives compensation in the form of the rental fee. This exchange of consideration distinguishes a bailment for reward from other types of bailments.
It is important to note that in a bailment for reward, the bailee has a duty of care to protect the property while it is in their possession. They are expected to exercise reasonable care and take necessary precautions to prevent damage or loss.
A rental agreement is an example of a bailment for reward because there is consideration exchanged between the parties. The bailee pays a fee or rental payment to the bailor in exchange for temporary possession and use of the property. This exchange of consideration distinguishes it from other types of bailments and establishes the contractual relationship between the parties.
To know more about agreement ,visit:
https://brainly.com/question/31361349
#SPJ11
Assume that the demand curve D(p) given below is the market demand for widgets:
Q=D(p)=2631−23pQ=D(p)=2631-23p, p > 0
Let the market supply of widgets be given by:
Q=S(p)=−4+8pQ=S(p)=-4+8p, p > 0
where p is the price and Q is the quantity. The functions D(p) and S(p) give the number of widgets demanded and supplied at a given price.
1.What is the equilibrium price?
Please round your answer to the nearest hundredth.
2. What is the equilibrium quantity?
Please round your answer to the nearest integer.
3. What is the price elasticity of demand (include negative sign if negative)?
Please round your answer to the nearest hundredth.
4. What is the price elasticity of supply?
Please round your answer to the nearest hundredth.
The market equilibrium price is $113.96, the quantity is 219 units, the price elasticity of demand is -1.23, and the price elasticity of supply is 2.
To find the equilibrium price and quantity, we need to equate the quantity demanded and supplied. Setting D(p) equal to S(p), we have 2631 - 23p = -4 + 8p. Solving this equation, we find the equilibrium price to be approximately $113.96.
Substituting the equilibrium price into either the demand or supply function, we can calculate the equilibrium quantity. Using the demand function D(p), we have Q = 2631 - 23(113.96) ≈ 219 units.
To calculate the price elasticity of demand, we use the formula: PED = (ΔQ/Δp) * (p/Q). Using the equilibrium values, we can find the percentage change in quantity (∆Q) and price (∆p) and then substitute them into the formula. The price elasticity of demand is approximately -1.23.
Similarly, the price elasticity of supply can be calculated using the formula: PES = (ΔQ/Δp) * (p/Q). The elasticity is equal to the slope of the supply curve, which is the derivative of the supply function S(p). Calculating the derivative, we find PES = 2.
Therefore, the equilibrium price is $113.96, the equilibrium quantity is 219 units, the price elasticity of demand is -1.23, and the price elasticity of supply is 2.
learn more about supply here
https://brainly.com/question/28285610
#SPJ11
Joylin, Incorporated, has equity with a market value of $23.9 million and debt with a market value of $7.17 million. Treasury bills that mature in one year yield 5 percent per year and the expected return on the market portfolio is 12 percent. The beta of the company's equity is 1.24. The company pays no taxes. a. What is the company's debt-equity ratio? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. What is the company's weighted average cost of capital? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) c. What is the cost of capital for an otherwise identical all-equity company?
The debt-equity ratio can be calculated by dividing the market value of debt by the market value of equity. In this case, the debt-equity ratio is $7.17 million / $23.9 million = 0.30.
The weighted average cost of capital (WACC) is the average rate of return required by all providers of capital to the company, weighted by their respective proportions in the capital structure. The WACC is calculated by multiplying the cost of equity by the equity weight and the cost of debt by the debt weight, and then summing these two components.
In this case, since the company pays no taxes, the WACC is calculated as: (Equity weight * Cost of equity) + (Debt weight * Cost of debt). The cost of equity is calculated using the capital asset pricing model (CAPM): Cost of equity = Risk-free rate + Beta * (Market return - Risk-free rate). The debt weight is the market value of debt divided by the sum of market value of debt and market value of equity. The WACC is not provided in the given information, so the calculation cannot be performed without additional data.
The cost of capital for an all-equity company can be calculated by using the cost of equity since there is no debt in the capital structure. The cost of equity is determined using the CAPM as mentioned in part b. The cost of capital for an all-equity company is the same as the cost of equity, which depends on the risk-free rate, beta, and the market return.
To know more about Market value of equity :
brainly.com/question/32517087
#SPJ11
On September 30,2021 , Bricker Enterprises purchased a machine for $206,000. The estimated service life is 10 years with a $20,000 residual value. Bricker records partial-year depreciation based on the number of months in service. Depreciation for 2021 using the straight-line method is: (Do not round intermediate calculations.)
The depreciation for 2021 calculated using straight line method, we need to first determine the number of months the machine was in service in 2021.
Since the machine was purchased on September 30, 2021, it was in service for only three months in that year.
To calculate the annual depreciation using the straight-line method we have:
Annual Depreciation = (Initial Cost - Residual Value) / Service Life
Annual Depreciation = ($206,000 - $20,000) / 10 = $186,000 / 10 = $18,600
Now calculating partial-year depreciation for 3 months:
Partial-Year Depreciation = (Annual Depreciation / 12) * Number of Months
Partial-Year Depreciation = ($18,600 / 12) * 3 = $4,650
Thus, the depreciation for 2021 using the straight-line method is $4,650.
Learn more about depreciation: https://brainly.com/question/29894489
#SPJ11
Control responsibilities include tracing, expediting and driver
hours administration Auditing and claims administration Pricing
issues Menu pricing system
The Control responsibilities of a catering manager involve expediting and monitoring the driver hours, auditing and claims administration, pricing issues, and menu pricing system.
A catering manager is responsible for managing and supervising the daily operations of a catering service. The control responsibilities of a catering manager include several important tasks. Firstly, expediting and monitoring the driver's hours is a crucial responsibility that ensures that the catering service is efficient in delivering orders on time. Auditing and claims administration is another important responsibility of a catering manager. This involves reviewing financial records and ensuring that there are no discrepancies. A catering manager should also be able to resolve pricing issues and manage menu pricing systems. By doing so, the catering service can maximize profits while keeping customers happy. Overall, a catering manager should have excellent communication and organizational skills to manage control responsibilities effectively.
Learn more about catering manager here:
https://brainly.com/question/32633151
#SPJ11
What are the three types of Termination payments that are required
by Ontario Legislation and how would you calculate them
The three types of termination payments required by Ontario Legislation are statutory notice, severance pay, and pay in lieu of notice.
How is statutory notice calculated?Statutory notice is the minimum notice period an employer must provide to an employee upon termination. The length of the notice period is determined by the employee's length of service.
According to the Ontario Employment Standards Act, the statutory notice period ranges from one to eight weeks, depending on the employee's tenure.
To calculate statutory notice, multiply the employee's length of service in completed years by the corresponding notice week.
For example, if an employee has worked for five years, the statutory notice would be 5 weeks. If the employee's service is less than a year, the notice is one week.
Learn more about statutory notice
brainly.com/question/31665275
#SPJ11
2 points
Blue Corp. is evaluating an extra dividend versus a share repurchase. In either case, $6,000 would be spent. Current earnings are $1.14 per share and the stock currently sells for $42 per share. There are 2,500 shares outstanding. Ignore taxes and other imperfections.
If Blue Corp. pays a dividend, what will be the dividend per share? After the dividend is paid, how many shares will be outstanding and what will the price per share be? Enter your answers rounded to 2 DECIMAL PLACES.
NOTE: Fractional shares are possible (Ex. 0.63 shares)
Dividend =
Shares outstanding =
Stock price =
After paying the dividend, the dividend per share would be $2.40, the new number of shares outstanding would be approximately 2,357.14 (including fractional shares), and the new stock price would be around $2.61.
If Blue Corp. pays a dividend of $6,000, we need to calculate the dividend per share.
Dividend per Share = Total Dividend / Number of Shares Outstanding
Dividend per Share = $6,000 / 2,500 shares
Dividend per Share = $2.40
After the dividend is paid, we need to calculate the new number of shares outstanding. Since fractional shares are possible, we will include decimals in our calculation.
New Shares Outstanding = Current Shares Outstanding - (Total Dividend / Stock Price)
New Shares Outstanding = 2,500 - ($6,000 / $42)
New Shares Outstanding ≈ 2,357.14
Lastly, we calculate the new stock price after the dividend is paid.
New Stock Price = (Earnings + Total Dividend) / New Shares Outstanding
New Stock Price = ($1.14 + $6,000) / 2,357.14
New Stock Price ≈ $2.61
Therefore, after paying the dividend, the dividend per share would be $2.40, the new number of shares outstanding would be approximately 2,357.14 (including fractional shares), and the new stock price would be around $2.61.
To know more about fractional shares, visit:
https://brainly.com/question/32829402
#SPJ11
the ucc provides the buyer with for breach to prevent further damages and to compensate for loss. (please use one word per blank.)
The UCC (Uniform Commercial Code) provides the buyer with remedies for breach to prevent further damages and to compensate for loss. These remedies are designed to protect the buyer's rights and provide a legal framework for resolving disputes in commercial transactions.
The UCC offers several remedies for the buyer in the event of a breach of contract by the seller. These remedies aim to address the harm caused by the breach and restore the buyer to the position they would have been in if the contract had been performed as agreed.
One of the key remedies provided by the UCC is the right to "cover." This allows the buyer to purchase substitute goods or services from another seller to fulfill their needs. The buyer can then recover the difference between the cost of cover and the contract price from the breaching seller.
Another remedy available to the buyer is "damages." This refers to monetary compensation for any loss or harm suffered as a result of the breach. The UCC provides guidelines for calculating the amount of damages based on various factors such as the actual loss, market price, or resale value of the goods.
Additionally, the UCC grants the buyer the right to "specific performance" in certain cases. This remedy allows the buyer to compel the seller to fulfill their contractual obligations and deliver the agreed-upon goods or perform the specified services.
By providing these remedies, the UCC aims to protect the buyer's interests and ensure fair and equitable resolution of disputes in commercial transactions. It enables the buyer to take action to prevent further damages and seek appropriate compensation for their losses due to a breach of contract.
To learn more about UCC click here:
brainly.com/question/14957422
#SPJ11
The UCC (Uniform Commercial Code) provides the buyer with remedies for breach to prevent further damages and to compensate for loss. These remedies are designed to protect the buyer's rights and provide a legal framework for resolving disputes in commercial transactions.
The UCC offers several remedies for the buyer in the event of a breach of contract by the seller. These remedies aim to address the harm caused by the breach and restore the buyer to the position they would have been in if the contract had been performed as agreed.
One of the key remedies provided by the UCC is the right to "cover." This allows the buyer to purchase substitute goods or services from another seller to fulfill their needs. The buyer can then recover the difference between the cost of cover and the contract price from the breaching seller.
Another remedy available to the buyer is "damages." This refers to monetary compensation for any loss or harm suffered as a result of the breach. The UCC provides guidelines for calculating the amount of damages based on various factors such as the actual loss, market price, or resale value of the goods.
Additionally, the UCC grants the buyer the right to "specific performance" in certain cases. This remedy allows the buyer to compel the seller to fulfill their contractual obligations and deliver the agreed-upon goods or perform the specified services.
By providing these remedies, the UCC aims to protect the buyer's interests and ensure fair and equitable resolution of disputes in commercial transactions. It enables the buyer to take action to prevent further damages and seek appropriate compensation for their losses due to a breach of contract.
To learn more about UCC click here:
brainly.com/question/14957422
#SPJ11
1. What are the main objectives that the Fed is trying to achieve
with the current monetary policy？
2. Which tools the Fed is
using to achieve these objectives?
These tools, among others, are employed by the Fed to implement monetary policy and pursue its objectives of price stability, maximum employment, and economic growth.
The specific use of these tools depends on the prevailing economic conditions and the assessment of the Federal Reserve policymakers.
1. The main objectives that the Federal Reserve (the Fed) is trying to achieve with the current monetary policy are:
a) Price stability: The Fed aims to maintain a stable and low rate of inflation over time. Price stability helps to promote economic certainty, maintain the purchasing power of money, and support sustainable economic growth.
b) Maximum employment: The Fed strives to promote a strong labor market and achieve maximum employment. This involves fostering conditions that facilitate job creation, reducing unemployment, and providing opportunities for individuals to participate in the workforce.
c) Economic growth: The Fed aims to support and sustain long-term economic growth by implementing policies that foster a stable and healthy macroeconomic environment. This includes promoting stable financial markets, encouraging investment, and ensuring the smooth functioning of the overall economy.
2. The Fed utilizes several tools to achieve these objectives, including:
a) Monetary policy interest rates: The Federal Reserve sets and adjusts the federal funds rate, which influences short-term interest rates in the economy. By raising or lowering interest rates, the Fed can influence borrowing costs, investment decisions, consumer spending, and overall economic activity.
b) Open market operations: The Fed conducts open market operations by buying or selling government securities (bonds) in the open market. When the Fed buys securities, it increases the money supply, providing liquidity to financial institutions and stimulating lending and economic activity. Conversely, when the Fed sells securities, it reduces the money supply, which can help control inflationary pressures.
c) Reserve requirements: The Fed establishes reserve requirements, which are the minimum amounts of funds that banks must hold in reserve against certain deposits. By adjusting these requirements, the Fed can influence the amount of money that banks can lend, impacting overall liquidity and credit availability in the economy.
d) Forward guidance: The Fed uses forward guidance to communicate its intentions and policy outlook to the public and financial markets. By providing clear guidance on future policy actions and economic conditions, the Fed aims to influence market expectations and guide economic behavior.
e) Quantitative easing: In certain situations, the Fed may implement quantitative easing (QE) measures, which involve purchasing longer-term securities from financial institutions. This aims to lower long-term interest rates, support lending, stimulate economic activity, and address specific economic challenges, such as during periods of economic downturn or financial crisis.
These tools, among others, are employed by the Fed to implement monetary policy and pursue its objectives of price stability, maximum employment, and economic growth. The specific use of these tools depends on the prevailing economic conditions and the assessment of the Federal Reserve policymakers.
To learn more about monetary policy
https://brainly.com/question/30239938
#SPJ11
Discuss the difference between selling and marketing management
orientations. During your discussion ensure to list the key
components of each philosophy and give examples of organizations
that would
Selling and marketing are two different concepts used by organizations to promote their products to consumers. Selling is an aggressive approach used to sell a product or service to the consumers. Marketing is a holistic approach to understand the customer's needs and then create a product that meets those needs.
Below are the differences between selling and marketing:Components of selling management:The primary focus of selling management is to sell the product to the customer at any cost. The process starts by creating the product, identifying the customer base, promoting it through advertisements, and then closing the sale.
Below are the components of selling management:Salesperson: In selling management, the salesperson is the most critical component as they represent the company to the customers. The salesperson must be able to communicate the benefits of the product to the customers.
The process starts by identifying the customer's needs, creating a product that meets those needs, promoting it through advertisements, and then closing the sale. Below are the components of marketing management:Product:
Product is the most critical component of marketing management as it must meet the needs of the customers. Marketing research: Marketing research helps in identifying the customer's needs and creating a product that meets those needs.
Pricing: Pricing is also an essential component of marketing management, but it is done based on the product's value to the customer.
Promotion: Promotion is an integral part of marketing management as it helps in creating brand awareness and attracting customers.Place: Place refers to the channels used to distribute the product to the customers. The product must be available to the customers whenever and wherever they want it.
Examples of organizations: One of the best examples of selling management is door-to-door sales, where salespeople go from house to house selling products like vacuum cleaners, encyclopedias, etc.
One of the best examples of marketing management is Apple Inc, which creates products that meet the needs of its customers and markets them using innovative advertisements and promotions.
To know more about marketing here
https://brainly.com/question/27155256
#SPJ11
Which of the following is NOT a step in the Historic (Back
Simulation) Approach to measuring market risk?
1.Measuring sensitivity
2.Measuring exposure
3.Measure variance
4.Measure risk
The step that is NOT part of the Historic (Back Simulation) Approach to measuring market risk is measuring variance.
The Historic (Back Simulation) Approach is a method used to measure market risk by analyzing historical data. It involves several steps to assess the risk associated with an investment portfolio or financial instrument. The steps include measuring sensitivity, measuring exposure, measuring risk, and simulating historical returns.
Measuring sensitivity: This step involves determining the sensitivity of the portfolio or instrument to changes in market factors such as interest rates, exchange rates, or stock prices. Sensitivity measures like delta, gamma, or duration are commonly used.
Measuring exposure: Once the sensitivity is determined, the next step is to measure the exposure of the portfolio or instrument to these market factors. This helps in understanding how much the portfolio's value may change based on different market scenarios.
Measuring risk: This step involves quantifying the risk associated with the portfolio or instrument based on historical data. Different risk measures such as value at risk (VaR) or expected shortfall (ES) can be used to estimate the potential losses at a given confidence level.
Simulating historical returns: In this step, historical data is used to simulate the portfolio's performance under various market conditions. This allows for the estimation of potential gains or losses based on the historical behavior of the markets.
However, measuring variance is not a specific step in the Historic (Back Simulation) Approach. Variance is a statistical measure that quantifies the dispersion of returns around the mean. While it is often used in risk analysis and portfolio management, it is not explicitly mentioned as a step in this particular approach.
Learn more about varience here:
https://brainly.com/question/31432390
#SPJ11
In Western economies, which of the following industries is least likely to be operated or controlled by government? I A. Broadcasting B. Railroads C. Agriculture D. Telecommunications
The industry that is least likely to be operated or controlled by the government in Western economies is telecommunications.
The correct option is D. Telecommunications
In Western economies, the industries that are least likely to be operated or controlled by the government are those that have undergone significant privatization and liberalization processes. While broadcasting, railroads, and agriculture may still have some level of government involvement or regulation, the telecommunications industry has experienced substantial privatization and competition.
Telecommunications has witnessed a shift towards market-oriented reforms, allowing for private companies to enter and operate in the sector. This has led to increased competition, innovation, and investment, resulting in a more dynamic and consumer-driven market. Governments have recognized the benefits of market forces in the telecommunications industry and have encouraged private sector participation through deregulation and the establishment of regulatory frameworks to ensure fair competition and protect consumer interests.
Learn more about consumer here:
https://brainly.com/question/32653980
#SPJ11
Jason is a 50% partner in Jason’s Jym, LLC. His basis in his partnership interest is $50,000 as of 1/1/2022. The schedule K for the partnership’s 2022 tax year is listed below:
Schedule K Item
Schedule K Total
Ordinary Income
$100,000
Dividend Income
$50,000
Long-term capital gain
$20,000
Charitable Contributions
$50,000
What amount of income would Jason need to report on his 1040 based on his partnership earnings? Explain which portion of this would be ordinary income or deduction and which portion would be capital gain or loss. What would his new basis in the partnership be at the end of the year?
Jason's new basis in the partnership at the end of the year would be:
$50,000 (initial basis) + $50,000 (share of ordinary income) - $25,000 (share of charitable contributions) = $75,000.
Jason is a 50% partner in Jason's Jym, LLC, with a basis of $50,000 in his partnership interest as of 1/1/2022. The partnership's Schedule K for the 2022 tax year shows the following amounts:
- Ordinary Income: $100,000
- Dividend Income: $50,000
- Long-term Capital Gain: $20,000
- Charitable Contributions: $50,000
To determine the amount of income Jason needs to report on his 1040 based on his partnership earnings, we consider his share of the partnership's income and deductions. As a 50% partner, Jason would report 50% of each item listed on the Schedule K.
Therefore, Jason would report:
- Ordinary Income: 50% of $100,000 = $50,000 as ordinary income on his 1040.
- Dividend Income: 50% of $50,000 = $25,000 as ordinary income on his 1040.
- Long-term Capital Gain: 50% of $20,000 = $10,000 as capital gain on his 1040.
- Charitable Contributions: 50% of $50,000 = $25,000 as a charitable deduction on his 1040.
As for Jason's new basis in the partnership at the end of the year, we need to adjust the basis based on the partnership's income and deductions. Jason's basis would increase by his share of the partnership's income ($50,000) and decrease by his share of the charitable contributions ($25,000).
In conclusion, Jason would report $50,000 as ordinary income, $25,000 as dividend income, and $10,000 as long-term capital gain on his 1040 based on his partnership earnings. His new basis in the partnership at the end of the year would be $75,000.
To learn more about Partnership
brainly.com/question/2494726
#SPJ11
Mr Bennett borrows an amount of money for emergency car repairs. The interest on the loan is compounded monthly. After two years the debt accumulated by R3 980.00 to the amount of R13 923.00. The yearly interest rate, expressed as a percentage and rounded to two decimal places, at which the money was borrowed, is
a. 14.12%
b. 1.41%
c. 16.95%
d. 17.00%
The correct answer is:
b. 1.41%
To determine the yearly interest rate at which the money was borrowed, we can use the formula for compound interest:
A = P(1 + r/n)^(n*t)
Where:
A = Final amount (R13,923.00)
P = Principal amount (R3,980.00)
r = Annual interest rate (unknown)
n = Number of times interest is compounded per year (12, since it is compounded monthly)
t = Time in years (2 years)
We can rearrange the formula to solve for the annual interest rate (r):
r = (A/P)^(1/(n*t)) - 1
Plugging in the given values:
r = (13,923/3,980)^(1/(12*2)) - 1
≈ 1.2005^(1/24) - 1
≈ 1.014112 - 1
≈ 0.014112
Converting the decimal to a percentage, rounded to two decimal places, the annual interest rate is approximately 1.41%.
Therefore, the correct answer is:
b. 1.41%
To know more about annual interest rate, visit:
https://brainly.com/question/20631001
#SPJ11
Which of the following companies generated the best risk adjusted return? Why?
•Stock 1:
•Total Return: 18.36-17.27+0.95=$2.04
•$2.04/17.27=11.8%
•Expected Return: 1.1*.06^+.025=9.1
•Alpha: 2.7%
•Stock 2:
•Total Return: 81.04-72.95+1.25=$9.34
•$9.34/72.95=12.8%
•Expected Return: 1.5*.06+.025=11.5%
•Alpha: 1.3%
•Stock 3:
•Total Return: 111.58-105.23+2=$8.35
•$8.35/105.23=7.9%
•Expected Return: 0.8*.06+.025=7.3%
•Alpha: 0.6%
Stock 2 generated the best risk-adjusted return because it had the highest total return of $9.34 and an expected return of 11.5%. The alpha of 1.3% indicates that the stock outperformed its expected return. This suggests that Stock 2 had better performance relative to its risk compared to the other stocks.
Stock 2 generated the best risk-adjusted return because it delivered higher returns relative to its expected return and exhibited positive alpha. The total return of $9.34 on Stock 2 was higher than the total returns of Stock 1 ($2.04) and Stock 3 ($8.35), indicating that Stock 2 had better price appreciation during the investment period.
However, it is essential to consider the expected return as well. Stock 2 had an expected return of 11.5%, which was higher than the expected returns of Stock 1 (9.1%) and Stock 3 (7.3%). This implies that Stock 2 had better performance relative to its expected performance.
Additionally, Stock 2 had a positive alpha of 1.3%, which indicates that it outperformed the market (represented by the risk-free rate and market risk premium) by that percentage. This suggests that Stock 2's returns were higher than what could be explained by market factors alone, demonstrating superior investment management or other favorable conditions.
Considering these factors, Stock 2 exhibited the best risk-adjusted return among the given options, offering a higher return compared to its expected performance and demonstrating potential outperformance relative to the market.
To know more about risk premium, visit:
https://brainly.com/question/32624379
#SPJ11
Statistical discrimination refers to: the crowding of women or minorities into low-paying occupations. significant differences in average levels of earnings by gender, race, and ethnicity, after accounting for nondiscriminatory factors. making individual hiring decisions on the basis of the characteristics of the group to which a person belongs, rather than on his or her personal characteristics and productivity. the 50-percent unexplained residual in studies that try to account for wage differences by gender, race, and ethnic origin.
Statistical discrimination refers to- making individual hiring decisions on the basis of the characteristics of the group to which a person belongs, rather than on his or her personal characteristics and productivity.
Statistical discrimination is a type of discrimination where individuals are judged based on the characteristics of the group they belong to, rather than their own personal characteristics and productivity. This type of discrimination occurs when employers or decision-makers use statistical information about a group to make assumptions or predictions about an individual's characteristics and abilities, rather than evaluating the individual on their own merits.
For example, an employer may decide not to hire a woman for a job that involves physical labor, assuming that women are generally weaker than men, and therefore, less capable of performing the physical tasks required for the job. This type of decision is based on statistical information about the group (women), rather than the individual's actual abilities.
Statistical discrimination can be harmful to individuals who are unfairly judged and denied opportunities based on their group characteristics, rather than their own abilities and potential. It can also perpetuate stereotypes and limit diversity and inclusion in the workforce.
To know more about discrimination here
https://brainly.com/question/10642367
#SPJ4
On 1 June 2018, the unadjusted financial statements of Luca Co showed the following information: During the financial year ended 31 May 2019, the following transactions took place: (i) An old equipment with a net book value of $120,300 was sold for $105,700 on 10 August 2018. It was purchased by the company at $210,600. (ii) On 8 November 2018, Luca Co acquired an equipment for $245,000. The company paid $2,300 for delivery as well as $10,200 for a year's insurance coverage. (iii) Equipment is depreciated at 20% per year on net book value. It is the company's policy to charge a full-year's depreciation in the year of acquisition of an asset and none in the year of disposal.
In the financial year ended 31 May 2019, Luca Co sold an old equipment for $105,700 and acquired a new equipment for $245,000. The company follows a depreciation policy of charging a full-year's depreciation in the year of acquisition and none in the year of disposal.
The sale of the old equipment with a net book value of $120,300 for $105,700 on 10 August 2018 results in a loss on disposal. The loss on disposal can be calculated by subtracting the selling price from the net book value of the equipment: $120,300 - $105,700 = $14,600.
On 8 November 2018, Luca Co acquired a new equipment for $245,000. Additionally, the company incurred $2,300 for delivery and $10,200 for a year's insurance coverage. The total cost of the new equipment, including delivery and insurance, is $257,500 ($245,000 + $2,300 + $10,200).
According to the company's depreciation policy, a full-year's depreciation is charged in the year of acquisition. Since the equipment was acquired during the financial year ended 31 May 2019, the depreciation expense for this equipment would be 20% of its net book value. The net book value can be calculated by subtracting the depreciation expense from the initial cost: $245,000 - ($245,000 * 20%) = $196,000. Therefore, the depreciation expense for the new equipment is $49,000 ($245,000 * 20%).
In summary, Luca Co incurred a loss of $14,600 on the sale of the old equipment and recorded a depreciation expense of $49,000 for the new equipment acquired during the financial year ended 31 May 2019. These transactions affect the company's financial statements and should be appropriately recorded and disclosed in the relevant accounts and notes.
Learn more about financial here:
https://brainly.com/question/28644358
#SPJ11
Please show work in excel! Thank you!
How much would you pay for the right to receive $15,000 at the
end of 20 years if you can earn a 9% return on a real estate
investment with similar risk?
The present value of receiving $15,000 at the end of 20 years, assuming a 9% return on a real estate investment with similar risk, would be approximately $3,746.
To calculate the present value, we need to discount the future cash flow of $15,000 back to its present value using the given 9% return. The formula for calculating the present value is:
[tex]PV=\frac{FV}{(1+r)^{n} }[/tex]
Where PV is the present value, FV is the future value, r is the discount rate, and n is the number of years.
Plugging in the values, we have:
[tex]PV=\frac{15000}{(1+0.09)^{20} }[/tex]
≈ 2,189.59
Therefore, the present value of receiving $15,000 at the end of 20 years, with a 9% return on a real estate investment, is approximately $2,189.59. However, this is not the amount you would be willing to pay. To calculate the amount you would be willing to pay, we need to consider the opportunity cost of investing elsewhere at a 9% return.
The opportunity cost is the potential return you could earn by investing elsewhere. In this case, the opportunity cost is the amount that, if invested at a 9% return, would grow to $15,000 in 20 years.
Using the formula for future value,
[tex]PV=\frac{FV}{(1+r)^{n} }[/tex], we can rearrange it to solve for PV:
[tex]PV=\frac{FV}{(1+r)^{n} }[/tex]
[tex]\rightarrow PV=\frac{15000}{(1+0.09)^{20} }[/tex]
≈ 2,189.59
Therefore, the amount you would be willing to pay for the right to receive $15,000 at the end of 20 years, assuming a 9% return on a real estate investment with similar risk, would be approximately $2,189.59.
Learn more about opportunity cost at:
https://brainly.com/question/31580865
#SPJ11
Possession of monopoly power is sufficient for a defendant to be held liable for monopolization under Section 2 of the Sherman जिrt. True or False
The given statement based on possession of monopoly power is sufficient is False.
Possession of monopoly power alone is not sufficient to hold a defendant liable for monopolization under Section 2 of the Sherman Act.
While monopoly power is a necessary element, it is not the sole factor in determining liability.
Under Section 2 of the Sherman Act,
monopolization refers to the abuse or misuse of monopoly power to gain or maintain a dominant position in the market.
To establish a violation of Section 2, courts typically require proof of the following elements,
Monopoly power,
The defendant must possess significant market power, meaning it has the ability to control prices or exclude competition in a relevant market.
Willful acquisition or maintenance of monopoly power,
The defendant's acquisition or maintenance of monopoly power must be willful and achieved through anti-competitive conduct.
Mere success or size in the market is not enough to establish liability.
Anti-competitive conduct,
The defendant's conduct must involve anti-competitive practices, such as exclusionary or predatory behavior that harms competition in the market.
The Sherman Act prohibits not only the possession of monopoly power but also the abuse or misuse of that power to stifle competition or harm consumers.
Simply having a monopoly does not automatically make a company liable,
it is the anti-competitive conduct that accompanies the possession of monopoly power that triggers liability under Section 2 of Sherman Act.
learn more about monopoly here
brainly.com/question/29978465
#SPJ4
The above question is incomplete, the complete question is:
Possession of monopoly power is sufficient for a defendant to be held liable for monopolization under Section 2 of the Sherman Act. True or False
How are businesses responding to the environmental issues facing
society? Give examples.
Businesses are increasingly adopting sustainable practices and investing in renewable energy sources to address environmental issues.
Many businesses recognize the importance of addressing environmental issues and are taking proactive steps to minimize their ecological footprint.
They are implementing sustainable practices such as reducing waste, conserving energy, and optimizing resource usage.
Additionally, companies are investing in renewable energy sources like solar and wind power to reduce their reliance on fossil fuels.
This shift towards sustainability not only benefits the environment but also enhances brand reputation and attracts environmentally conscious consumers.
learn more about fossil fuels here:
https://brainly.com/question/2582135
#SPJ11
3. Why are many of the companies that are recognized for
providing outstanding customer service known for their outstanding
leadership?
4. Explain an interdependent environment. How important is
it?
5
3. Companies with exceptional customer service demonstrate leadership through customer-centric culture, employee empowerment, and continuous improvement. 4. Interdependent environments promote collaboration, accountability, adaptability, productivity, and resilience.
3. Outstanding customer service is often a reflection of exceptional leadership within an organization. Effective leaders understand the importance of creating a customer-centric culture that permeates throughout the entire company.
They establish a clear vision and set high standards for customer service, which are communicated to all employees. By prioritizing customer satisfaction, leaders inspire and motivate their teams to go above and beyond in meeting customer needs.
Moreover, outstanding leaders empower their employees to provide exceptional service by fostering an environment of trust, autonomy, and support. They understand that frontline employees are often the face of the company and have direct interactions with customers.
By empowering these employees with the authority and resources to resolve issues and exceed customer expectations, leaders enable them to deliver outstanding experiences.
Furthermore, outstanding leadership drives continuous improvement in customer service. Effective leaders encourage a culture of learning and innovation, where employees are encouraged to seek feedback, identify areas for improvement, and implement changes.
They promote a mindset of adaptability and responsiveness to evolving customer needs and market dynamics, ensuring that the company stays ahead of the competition.
4. In an interdependent environment, various elements within a system or organization rely on each other for mutual success. It is an environment where collaboration, cooperation, and synergy are essential. In a business context, an interdependent environment refers to the interconnectedness and inter-reliance of different departments, teams, and individuals to achieve common goals.
An interdependent environment is crucial for several reasons. First, it fosters effective communication and collaboration among team members.
When different departments or teams work together, sharing information, knowledge, and resources, they can leverage each other's strengths and expertise, leading to improved decision-making and problem-solving. This collaborative approach promotes a sense of unity and shared purpose, enhancing overall productivity and efficiency.
Second, an interdependent environment encourages accountability and responsibility. When individuals and teams understand that their actions and performance directly impact others within the system, they are more likely to take ownership of their tasks and strive for excellence.
This shared responsibility promotes a sense of trust and reliability among team members, as they rely on each other's contributions to achieve success.
Lastly, an interdependent environment promotes adaptability and resilience. By recognizing that the success of the whole depends on the successful functioning of its parts, organizations can adapt quickly to changes and challenges.
When teams are interconnected and inter-reliant, they can swiftly adjust strategies, allocate resources, and overcome obstacles collectively, ensuring the organization's ability to thrive in dynamic and competitive environments.
Learn more about Companies here:
https://brainly.com/question/30532251
#SPJ11
Discuss the three (3) major effects that electronic commerce has
on distribution and give examples
The three major effects that electronic commerce has on distribution are increased reach and accessibility, disintermediation, and the need for efficient logistics and supply chain management.
1. Increased reach and accessibility: Electronic commerce allows businesses to reach a global customer base, breaking geographical barriers. With online platforms, businesses can expand their distribution channels beyond physical stores and reach customers anywhere in the world. This widens the market potential and enables businesses to cater to a larger audience. For example, an e-commerce website can facilitate the sale and delivery of products to customers in different countries, expanding the distribution reach of a business.
2. Disintermediation: Electronic commerce eliminates or reduces the need for intermediaries in the distribution process. By selling directly to customers through online platforms, businesses can bypass traditional middlemen such as wholesalers or retailers. This reduces costs associated with intermediary margins and streamlines the distribution channel. For instance, an online marketplace connects producers directly with consumers, eliminating the need for traditional retail stores.
3. Efficient logistics and supply chain management: Electronic commerce requires efficient logistics and supply chain management to ensure prompt and reliable product delivery. The increased volume of online orders necessitates streamlined processes for order fulfillment, inventory management, and shipping. Companies must invest in robust logistics infrastructure, such as warehouses, fulfillment centers, and reliable shipping partners, to meet customer expectations. Amazon's extensive fulfillment network and use of advanced logistics technologies serve as an example of efficient supply chain management in e-commerce.
Overall, electronic commerce revolutionizes distribution by expanding reach, enabling direct customer interactions, and demanding efficient logistics management. These effects empower businesses to access a global market, bypass intermediaries, and optimize their supply chains, ultimately enhancing the efficiency and effectiveness of distribution processes.
To learn more about electronic commerce, Click here:
https://brainly.com/question/5123792
#SPJ11
Selected information for Blake's Restaurant Supply follows. a. During 2021, how much cash did Blake's collect from sales? b. During 2021, what was the cost of goods produced by the company? c. Assuming the company neither sold nor salvaged any assets during the year, what were the company's capital expenditures during 2021? d. Assuming there were no financing cash flows during 2021 and basing youf answer solely on the information provided, what was Blake's cash flow from operations in 2021 ?
a. Blake's collected $812 million in cash from sales during 2011.
b. The cost of goods produced by the company in 2011 was $512 million.
c. The company's capital expenditures during 2011 amounted to $139 million.
d. Blake's cash flow from operations in 2011 was $198 million.
Cash flow from operations is an important measure used to assess the financial health and performance of a company. It provides insight into the amount of cash generated or used by a company's core operations, excluding cash flows from financing and investing activities. In other words, it focuses solely on the cash flows resulting from the day-to-day operations of the business.
To calculate cash flow from operations, we need to consider changes in various balance sheet and income statement items. In this case, we'll use the provided information for Blake's Restaurant Supply to determine the cash flow from operations in 2011.
a. To calculate the cash collected from sales during 2011, we need to consider the change in accounts receivable. Accounts receivable represents the amount of money owed to the company by its customers for sales made on credit. The formula to calculate the cash collected from sales is:
Cash collected from sales = Net sales + Decrease in accounts receivable
Given that the net sales in 2011 were $782 million and the change in accounts receivable was an increase of $30 million ($87 million - $57 million), we can calculate the cash collected from sales:
Cash collected from sales = $782 million + $30 million = $812 million
Therefore, Blake's Restaurant Supply collected $812 million in cash from sales during 2011.
b. The cost of goods produced by the company can be determined by examining the change in finished goods inventory. Finished goods inventory represents the value of products that are ready to be sold. The formula to calculate the cost of goods produced is:
Cost of goods produced = Decrease in finished goods inventory + Cost of goods sold
Given that the decrease in finished goods inventory was $10 million ($29 million - $39 million) and the cost of goods sold in 2011 was $502 million, we can calculate the cost of goods produced:
Cost of goods produced = $10 million + $502 million = $512 million
Therefore, the cost of goods produced by Blake's Restaurant Supply in 2011 was $512 million.
c. To calculate the company's capital expenditures during 2011, we need to determine the change in net fixed assets. Net fixed assets represent the value of long-term assets, such as buildings and equipment, net of accumulated depreciation. Since the problem states that the company neither sold nor salvaged any assets during the year, the change in net fixed assets will represent the capital expenditures. The formula to calculate capital expenditures is:
Capital expenditures = Increase in net fixed assets + Depreciation
Given that the increase in net fixed assets was $78 million ($482 million - $404 million) and the depreciation in 2011 was $61 million, we can calculate the capital expenditures:
Capital expenditures = $78 million + $61 million = $139 million
Therefore, the company's capital expenditures during 2011 amounted to $139 million.
d. Assuming no financing cash flows during 2011, we can calculate Blake's cash flow from operations by using the following formula:
Cash flow from operations = Net income + Depreciation - Increase in accounts payable
Given that the net income in 2011 was $142 million and the increase in accounts payable was $5 million ($44 million - $39 million), we can calculate the cash flow from operations:
Cash flow from operations = $142 million + $61 million - $5 million = $198 million
Therefore, Blake's cash flow from operations in 2011 was $198 million.
To know more about Cash Flow here
https://brainly.com/question/33221318
#SPJ4
Complete Question
Selected information for Blake's Restaurant Supply follows.
($ in millions)
2010 2011
Net sales $694 $782
Cost of goods sold 450 502
Depreciation 51 61
Net income 130 142
Finished goods inventory 39 29
Accounts receivable 57 87
Accounts payable 39 44
Net fixed assets 404 482
Year-end cash balance $86 $135
a. During 2011, how much cash did Blake's collect from sales?
b. During 2011, what was the cost of goods produced by the company?
c. Assuming the company neither sold nor salvaged any assets during the year, what were the company's capital expenditures during 2011?
d. Assuming that there were no financing cash flows during 2011 and basing your answer solely on the information provided, what was Blake's cash flow from operations in 2011?
Which one of the following statements regarding the delivery of an annuity contract is correct? The agent must deliver the contract and confirm that there has not been a change of insurability since the contract was approved. The insurer can mail or courier the contract to its owner. The insurer can courier the contract to its owner, provided that the courier obtains proof of receipt. A copy of the proposed contract must be given to the client when the application is completed.
The correct statement regarding the delivery of an annuity contract is that the insurer can mail or courier the contract to its owner.
Annuity contracts are insurance products that provide a stream of income over a specified period or for the lifetime of the annuitant. When it comes to delivering the annuity contract, the common practice is for the insurer to mail or courier the contract to its owner.
Option B, which states that the insurer can mail or courier the contract to its owner, is the correct statement. This delivery method ensures that the contract reaches the annuity contract owner securely and in a timely manner.
Option A, stating that the agent must deliver the contract and confirm no change of insurability, may not be accurate in all cases. The delivery of the contract is typically handled by the insurer rather than the agent.
Option C mentions courier delivery with proof of receipt, which is a plausible method but not the only valid option for delivery.
Option D, requiring a copy of the proposed contract to be given to the client upon application completion, may be a requirement for some jurisdictions or insurance products, but it is not specifically related to the delivery of an annuity contract.
Learn more about annuity contract here:
https://brainly.com/question/28923065
#SPJ11
Conflicts rarely exist between the planning and control phases of budgeting.
a. True.
b. False.
please explain properly the type of decisions conflicts aruse in the planning and control phase. ASAP
b. False. Conflicts rarely exist between the planning and control phases of budgeting.
Conflicts can arise between the planning and control phases of budgeting. During the planning phase, goals and budgets are set, while the control phase involves monitoring and evaluating actual performance against the budget. Conflicts can occur when there are discrepancies between planned and actual results, leading to challenges in resource allocation, goal achievement, and performance evaluation. For example, if actual expenses exceed the planned budget, there may be disagreements on how to address the shortfall. Similarly, if performance targets are not met, conflicts may arise in determining the reasons and taking corrective actions.
Learn more about Conflicts here:
https://brainly.com/question/17085630
#SPJ11
In your own words, illustrate the the effect of Malaysia
dependence on imported rice? (23 marks)
Malaysia's dependence on imported rice has significant implications for its economy, food security, and agricultural sector.
Economic vulnerability: Dependence on imported rice exposes Malaysia to economic risks, including price fluctuations, supply disruptions, and changes in trade policies.
Pressure on foreign exchange reserves: Importing rice requires significant monetary outflows, which strain Malaysia's foreign exchange reserves.
Food security concerns: Dependence on imported rice raises questions about self-sufficiency and domestic food security, as disruptions in the global rice market can impact availability and affordability.
Agricultural sector development: The reliance on imported rice emphasizes the need to prioritize the development of domestic rice production, enhancing self-sufficiency and reducing import dependency.
Learn more about food security from the given link:
https://brainly.com/question/29886717
#SPJ11
2b. A popular heuristic lot sizing method is known as the period order quantity (POQ). This method requires determining the average number of periods spanned by the EOQ and choosing the lot size to equal this fixed period supply. Let P be the average number of periods spanned by the EOQ rounded to the nearest integer. That is, if λ=
n
∑
i−1
n
r
i
, where n is the planning horizon length, and r
i
denotes the requirements in period i, then we compute the EOQ using this value of λ, let P=
λ
EOQ
, and round P to the nearest integer to obtain P
′
. Once we have the integer P
′
, whenever we produce, we always produce the next P
′
periods' requirements. If, for example, the EOQ equals 139 and λ=43.9, then P=
43.9
139
=3.17 and P
′
=3. Consider the requirements given below for a six-period problem, and assume K=$180, and h=$0.50 per unit per period. What is the EOQ value? What is the value of P
′
? What is the total setup plus holding cost incurred using the POQ heuristic described to solve this problem? What is the total setup plus holding cost incurred if we instead use the EOQ heuristic (by using lot sizes that round the EOQ to the nearest integer)?
The total setup plus holding cost incurred is $206.02 for both the poq heuristic and the eoq heuristic.
to calculate the eoq value, we need to use the formula:
eoq = sqrt((2 * d * s) / h)
where d is the total demand for the planning horizon, s is the setup cost per order, and h is the holding cost per unit per period.
given the following data:k = $180 (setup cost per order)
h = $0.50 (holding cost per unit per period)
using the provided requirements for the six-period problem, we can calculate the total demand:
d = ∑ri = 350 + 400 + 200 + 150 + 300 + 250 = 1650
now we can calculate the eoq:
eoq = sqrt((2 * 1650 * 180) / 0.50) = sqrt(594000) ≈ 771.51
so the eoq value is approximately 771.51 units.
to determine p′, we need to calculate λ, which is the average number of periods spanned by the eoq. let's use the given demand data:
λ = (1/6) * ∑ri = (1/6) * (350 + 400 + 200 + 150 + 300 + 250) = 175
p = (λ * eoq) / 1650 = (175 * 771.51) / 1650 ≈ 81.87
p′ (rounded to the nearest integer) is 82.
to calculate the total setup plus holding cost incurred using the poq heuristic, we need to find the number of orders and the lot size:
number of orders = 6 / p′ = 6 / 82 ≈ 0.073 (rounded to 3 decimal places)
lot size = p′ = 82
total setup cost = k * number of orders = $180 * 0.073 ≈ $13.14
total holding cost = (h * eoq) / 2 = ($0.50 * 771.51) / 2 ≈ $192.88
total setup plus holding cost using the poq heuristic = total setup cost + total holding cost = $13.14 + $192.88 ≈ $206.02
if we instead use the eoq heuristic (by rounding the eoq to the nearest integer for lot sizes), the lot size would be 772. the calculations for setup and holding costs would be the same as above, resulting in a total setup plus holding cost of approximately $206.02.
Learn more about heuristic here:
https://brainly.com/question/29793101
#SPJ11
reverse auctions of the type used in business procurement:
Answer:
Reverse auctions used in business procurement involve sellers competing to win the business by offering progressively lower prices.
Explanation:
Reverse auctions in business procurement are a type of competitive bidding process where potential suppliers or sellers compete to win a contract by offering successively lower prices for the goods or services being procured. Unlike traditional auctions where buyers bid higher prices, reverse auctions reverse the direction by having sellers bid lower prices.
The auction platform facilitates real-time bidding and allows buyers to compare and evaluate multiple offers to select the most competitive bid. Reverse auctions are commonly used in procurement to drive cost savings, increase transparency, and encourage competition among suppliers.
Learn more about reverse auctions here: brainly.com/question/13647139
#SPJ11