Gravity is a fundamental force that attracts objects with mass towards each other. Weightlessness, on the other hand, is the sensation experienced when the force of gravity on an object is greatly reduced or eliminated.
Gravity is a force of attraction that exists between any two objects with mass. The magnitude of the gravitational force is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. In physics, gravity is commonly represented by the symbol "g" and is measured in units of acceleration, typically meters per second squared (m/s²). On Earth, the acceleration due to gravity is approximately 9.8 m/s², which means that objects near the Earth's surface experience a gravitational force of approximately 9.8 newtons per kilogram (N/kg).
Weight is the force exerted on an object due to gravity. It is the gravitational force acting on an object's mass. The weight of an object can be calculated using the formula W = mg, where W represents weight, m represents mass, and g represents the acceleration due to gravity. Weight is a vector quantity, meaning it has both magnitude and direction.
Weightlessness is the sensation of experiencing no apparent weight or feeling of gravity. It occurs when the force of gravity on an object is greatly reduced or eliminated. The most common examples of weightlessness are experienced in space or during free-fall. In space, astronauts experience a state of weightlessness because they are in constant free-fall around the Earth or another celestial body. During free-fall, objects are falling under the influence of gravity but with no support force to counteract it, giving the illusion of weightlessness.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
38.2.kg crate rests on a horizontal floor, and a 61.1−kg person is standing on the crate. Determine the magnitude of the normal for tiat (a) the floor exerts on the crate and (b) the crate exerts on the person. (a) Number Units (b) Number Units
The magnitude of the normal force that the floor exerts on the crate is 973.14 N. The magnitude of the normal force that the crate exerts on the person is 599.78 N.
a) The force exerted by the floor on the crate can be calculated by using Newton’s third law of motion that states that “for every action, there is an equal and opposite reaction.” Therefore, the magnitude of the normal force that the floor exerts on the crate is equal and opposite to the weight of the crate and the person.
Here, the weight of the crate and the person is the force of gravity acting on them and can be calculated as:
mass (m) = 38.2 + 61.1 = 99.3 kg
Weight = mass × gravitational acceleration (g)
= 99.3 × 9.8
= 973.14 N
Therefore, the magnitude of the normal force that the floor exerts on the crate is 973.14 N.
(b) The magnitude of the normal force that the crate exerts on the person is equal and opposite to the force of gravity acting on the person. The force of gravity acting on the person can be calculated as:
Weight of the person = mass × gravitational acceleration (g)
= 61.1 × 9.8
= 599.78 N
Therefore, the magnitude of the normal force that the crate exerts on the person is 599.78 N.
Learn more about the Newton’s third law of motion from the given link-
https://brainly.com/question/25998091
#SPJ11
1. If two identical waves interact constructively, how will this affect the amplitude of the wave? What about the wavelength and frequency? (10 points)
When two identical waves interact constructively, the amplitude of the wave will increase. The wavelength and frequency of the wave will remain unchanged.
Constructive interference occurs when two waves meet in phase, meaning their crests align with each other, resulting in reinforcement. In this case, the amplitudes of the waves add up, leading to an increase in the overall amplitude of the resulting wave. This can be visualized as the wave becoming taller or more intense.
However, the wavelength and frequency of the wave remain the same during constructive interference. The wavelength is determined by the source of the wave and does not change when the waves interact. Similarly, the frequency, which is the number of complete oscillations per unit time, remains constant as the waves combine.
In summary, when two identical waves interact constructively, the amplitude of the resulting wave increases while the wavelength and frequency remain unchanged. This phenomenon demonstrates how waves can reinforce each other and create regions of increased intensity or strength.
Learn more about amplitude of wave here:
brainly.com/question/32928325
#SPJ11
The magnification of an image is m=−2.00. Which of the following must be true? The image is magnified and virtual. The image is diminished and inverted. The image is diminished and erect. The image is magnifued and irverted.
Option B: The correct statement is "The image is diminished and inverted.", if the magnification of the image is -2.00.
The following equation determines how magnified an image is:
m = -h'/h,
where h' is the height of the image and h is the height of the object.
In the question, we are provided with the magnification which is equal to -2.00, it implies that the height of the image (h') is twice as small as the height of the object (h). This indicates that the image is diminished in size compared to the object.
Additionally, the negative sign in the magnification value (-2.00) indicates that the image is inverted. In other words, the top of the object is now at the bottom of the image, and vice versa.
To know more about magnification, refer:
https://brainly.com/question/13080012
#SPJ4
Four point charges q are placed at the corners of a square of side a. - Find the magnitude of the total Coulomb force F on each of the charges.
The magnitude of the total Coulomb force (F) on each of the charges is F = (3 * k * q²) / a²
To find the magnitude of the total Coulomb force (F) on each of the charges, we need to consider the forces exerted by the other charges.
Given that there are four charges q placed at the corners of a square, the force between any two charges can be calculated using Coulomb's law:
F = (k * |q1| * |q2|) / r²
Where:
F is the force between the charges
k is the Coulomb constant (approximately 8.988 × 10^9 N·m²/C²)
|q1| and |q2| are the magnitudes of the charges
r is the distance between the charges
Since all four charges are the same (q), the forces between them will have the same magnitude. Each charge experiences the force due to the other three charges.
To calculate the total force on each charge, we need to sum up the individual forces exerted by the other three charges:
F_total = F1 + F2 + F3
Substituting the given values into Coulomb's law, we have:
F_total = [(k * q²) / a²] + [(k * q²) / a²] + [(k * q²) / a²]
Simplifying the expression:
F_total = 3 * (k * q²) / a²
Therefore, the magnitude of the total Coulomb force (F) on each of the charges is given by:
F = (3 * k * q²) / a²
To know more about Coulomb force, refer here:
https://brainly.com/question/28306447#
#SPJ11
A diffraction grating is ruled with 12,500 lines/cm. Incident light of wavelength 650 nm illuminates the grating causing diffraction pattern to appear on a screen. (a) Calculate the distance between the ruled lines. (b) At what angles will the second and third order intensity maxima on the screen occur? (10 Marks)
a) The distance between the ruled lines is 0.00008 cm. b) The second order intensity maximum will occur at an angle of approximately [tex]9.38^0[/tex], and the third order intensity maximum will occur at an angle of approximately [tex]13.93^0[/tex].
For calculating the distance between the ruled lines, use the formula
d = 1 / (lines/cm)
Given that the ruling is 12,500 lines/cm, the distance between the ruled lines (d) is:
d = 1 / (12,500 lines/cm) = 0.00008 cm
Next, calculate the angles for the second and third order intensity maxima using the formula:
sinθ = mλ / d
For the second order (m = 2):
sinθ2 = (2 * 650 nm) / (0.00008 cm) = 0.1625
Taking the inverse sine of this value,
[tex]\theta2 = arcsin(0.1625) = 9.38^0[/tex]
For the third order (m = 3):
sinθ3 = (3 * 650 nm) / (0.00008 cm) = 0.24375
Taking the inverse sine of this value,
[tex]\theta3 = arcsin(0.24375) = 13.93^0[/tex]
Therefore, the second order intensity maximum will occur at an angle of approximately [tex]9.38^0[/tex], and the third order intensity maximum will occur at an angle of approximately [tex]13.93^0[/tex].
Learn more about intensity maxima here:
https://brainly.com/question/29848341
#SPJ11
A toy consists of a piece of plastic attached to a spring with spring constant 25000 N/m. The total mass is 0.2 kg. The spring is compressed 0.02 m towards the floor and then released. What is the maximum distance between the toy and the floor (in m)? Take g to be 9.8 m/s2 O a. 2.0 b. 9.8 O c. 0.0039 d. 2.6 O e. 0.39 A simple electrical circuit has a 9 volt battery. Take the electronic charge to be e = 1.6e-19 C. If 8e17 electrons per second are flowing in the circuit, what is the resistance of the circuit in ohms? a. 4500 O b. 350 O c. 70 O d. 0.87 O e. 110
The maximum distance between the toy and the floor is approximately 2.05 meters. We find the maximum distance between the toy and the floor, we can use the principle of conservation of mechanical energy.
The potential energy stored in the compressed spring is given by:
PE = (1/2)kx^2
Where k is the spring constant and x is the compression distance.
The initial potential energy of the toy when the spring is compressed is:
PE_initial = (1/2)(25000 N/m)(0.02 m)^2
PE_initial = 10 J
According to the conservation of mechanical energy, this potential energy is converted into the kinetic energy of the toy when it reaches the maximum distance from the floor. The maximum potential energy of the toy when it reaches the maximum distance is zero, as it is at its highest point.
Therefore, the kinetic energy at the maximum distance is equal to the initial potential energy:
KE_max = PE_initial = 10 J
The kinetic energy is given by:
KE = (1/2)mv^2
Where m is the mass of the toy and v is the velocity.
Using the given mass of 0.2 kg, we can rearrange the equation to solve for v
v = sqrt((2 * KE) / m)
v = sqrt((2 * 10 J) / 0.2 kg)
v ≈ 6.32 m/s
Now, we can calculate the maximum height reached by the toy using the equation for height:
h = (v^2) / (2 * g)
h = (6.32 m/s)^2 / (2 * 9.8 m/s^2)
h ≈ 2.05 m
To know more about spring constant, click here:-
https://brainly.com/question/29975736
#SPJ11
A projectile on Saturn is launched at an initial velocity of 28.0 m/s at an angle of 72.0
∘
from the horizontal. Find the time it takes for the projectile to reach the ground, in seconds. Assume the magnitude of the free-fall acceleration on Mars is 10.4 m/s
2
.
The time it takes for the projectile to reach the ground on Saturn is approximately 5.31 seconds.
To find the time it takes for the projectile to reach the ground, we can use the equations of motion. We can break down the initial velocity into its horizontal and vertical components. The horizontal component remains constant throughout the projectile's motion. The vertical component is influenced by the acceleration due to gravity.
First, we need to determine the vertical component of the initial velocity. Given that the initial velocity is 28.0 m/s and the launch angle is 72.0 degrees, we can find the vertical component using trigonometry:
Vertical component = Initial velocity * sin(angle)
Vertical component = 28.0 m/s * sin(72.0 degrees)
Vertical component = 27.01 m/s
Next, we can calculate the time it takes for the projectile to reach the ground using the vertical component and the acceleration due to gravity on Saturn (10.4 m/s^2). We can use the following kinematic equation:
Final velocity = Initial velocity + (acceleration * time)
Since the final velocity when the projectile reaches the ground is zero (as it stops moving vertically), we can rearrange the equation to solve for time:
0 = 27.01 m/s - (10.4 m/s^2 * time)
Solving for time:
10.4 m/s^2 * time = 27.01 m/s
time = 27.01 m/s / 10.4 m/s^2
time ≈ 2.6 seconds
However, this time corresponds only to the ascending portion of the projectile's trajectory. To find the total time, we need to consider both the ascending and descending portions. Since the motion is symmetrical, we can double the time:
Total time = 2 * 2.6 seconds
Total time ≈ 5.31 seconds
Therefore, it takes approximately 5.31 seconds for the projectile to reach the ground on Saturn.
Learn more about Saturn
brainly.com/question/12181523
#SPJ11
Zoe is striking a turing fork that is held near the mouth of a narrow plastic pipe that is partially underwater. The plastic pipe is raised and the first sound is heard when the air column is 9.0 cm long. The temperature in the room is 20
∘
C. What is the wavelength of the sound produced by the tuning fork? a) 4.9 cm b) 45 cm c) 9.0 cm d) 54 cm
The wavelength of the sound produced by the tuning fork can be calculated using the formula λ = 4L, where L is the length of the air column. Given that the air column length is 9.0 cm, the wavelength of the sound is 36.0 cm. Therefore the correct option is c) 9.0 am
When a tuning fork is struck near the mouth of a narrow plastic pipe that is partially underwater, a sound wave is generated. The first sound is heard when the air column inside the pipe is resonating at its fundamental frequency. In this case, the air column length is 9.0 cm.
To calculate the wavelength of the sound produced by the tuning fork, we can use the formula λ = 4L, where L is the length of the air column. Substituting the given value, we get λ = 4 * 9.0 cm = 36.0 cm.
Therefore, the wavelength of the sound produced by the tuning fork is 36.0 cm.
To know more about wavelength click here:
https://brainly.com/question/30611426
#SPJ11
A star at a distance of 50000 light years from the center of a galaxy has an orbital speed of 100 km/s around the galactic center. What is the total mass of the galaxy located at distances smaller than 50000 light years from the center? 7.6 x1010 solar masses O 4.2 x1011 solar masses O 1.4 x1011 solar masses 3.5 x1010 solar masses
The total mass of the galaxy located at distances smaller than 50,000 light years from the center is 1.4 x 10¹¹ solar masses.
The orbital speed of a star around the galactic center can provide insights into the mass distribution within the galaxy. In this case, the given star has an orbital speed of 100 km/s at a distance of 50,000 light years from the center. We can use the concept of Kepler's laws and the gravitational force equation to estimate the total mass of the galaxy.
Kepler's third law states that the square of the orbital period is directly proportional to the cube of the semi-major axis of the orbit. Since the orbital speed remains constant, the period of the star's orbit is also constant. Therefore, the distance from the galactic center can be considered as the semi-major axis of the orbit.
The orbital speed of the star is determined by the gravitational force exerted by the mass within its orbit. By equating the centripetal force to the gravitational force, we can derive the equation:
v² = G * (M_total / r)
where v is the orbital speed, G is the gravitational constant, M_total is the total mass of the galaxy within the star's orbit, and r is the distance from the galactic center.
To solve for M_total, we rearrange the equation as:
M_total = (v² * r) / G
Plugging in the given values, with v = 100 km/s and r = 50,000 light years, converted to kilometers (taking 1 light year = 9.461 x 10¹² km), and using the value of G, we can calculate the total mass:
M_total = (100² * 50,000 * 9.461 x 10¹²) / (6.67430 x 10⁻¹¹)
After performing the calculations, we find that the total mass of the galaxy located at distances smaller than 50,000 light years from the center is approximately 1.4 x 10¹¹ solar masses.
Learn more about Light Years
brainly.com/question/31566265
#SPJ11
Two point charges attract each other with an electrostatic force of magnitude F. The magnitude of the one charge is now doubled, the magnitude of the second charge is decreased by a factor of 4 and the radial distance between them is increased by a factor of 3 . Calculate the magnitude of the electrostatic force which now exists between the two charges. Choose your answer from he list below. Die elektrostatiese aantrekkingskrag tussen twee puntladings het 'n grootte van F. Die grootte van die een lading word nou verdubbel, die grootte van die tweede lading word verklein met 'n faktor van 4 en die radiale afstand tussend die twee ladings word vergroot met 'n faktor van 3 . Bereken die grootte van die elektrostatiese krag wat nou bestaan tussen die twee ladings. Kies jou antwoord vanuit die lys hieronder
The magnitude of the electrostatic force that now exists between the two charges is (1/36) * F.
To calculate the magnitude of the electrostatic force after the changes, we can use Coulomb's Law, which states that the electrostatic force (F) between two point charges is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them. Mathematically, it can be represented as:
F = k * (|q1| * |q2|) /[tex]r^2[/tex]
where k is the electrostatic constant.
Let's denote the original charges as q1 and q2, and the original distance between them as r. The magnitude of the original electrostatic force is F.
After the changes:
The magnitude of the first charge is doubled, so the new magnitude of q1 is 2 * |q1|.
The magnitude of the second charge is decreased by a factor of 4, so the new magnitude of q2 is (1/4) * |q2|.
The radial distance between them is increased by a factor of 3, so the new distance is 3 * r.
Plugging these values into Coulomb's Law, we get:
F' = k * (|2q1| * |(1/4)q2|) /[tex](3r)^2[/tex]
Simplifying:
F' = (1/36) * F
To know more about Coulomb's Law refer to-
https://brainly.com/question/506926
#SPJ11
When a force of 100N was applied tangentially to the circumference of a wheel with a radius of 50cm to which the shaft is fixed for 2 seconds, the angular velocity of the wheel at rest became 8 rad/sec.
(a) What is the moment of inertia of the wheel?
(b) How much does the angular momentum change while the force is applied?
(C) What is the angle the wheel rotates during this time?
(d) What is the final kinetic energy of the wheel?
The moment of inertia of the wheel is 125 kg⋅m². The change in the angular momentum of the wheel is 1000 kg⋅m²/s. The angle the wheel rotates during this time is 125 rad. The final kinetic energy of the wheel is 400 J.
The moment of inertia of the wheel is:
I = F * r * t / ω
where:
F is the force applied
r is the radius of the wheel
t is the time the force is applied
ω is the angular velocity of the wheel
Substituting the values, we get:
I = 100 N * 0.5 m * 2 s / 8 rad/sec = 125 kg⋅m²
(b)
The change in the angular momentum of the wheel is:
ΔL = Iω
Use code with caution. Learn more
where:
ΔL is the change in the angular momentum
I is the moment of inertia of the wheel
ω is the angular velocity of the wheel
Substituting the values, we get:
ΔL = 125 kg⋅m² * 8 rad/sec = 1000 kg⋅m²/s
(c)
The angle the wheel rotates during this time is:
θ = ΔL / ω
where:
θ is the angle the wheel rotates
ΔL is the change in the angular momentum
ω is the angular velocity of the wheel
Substituting the values, we get:
θ = 1000 kg⋅m²/s / 8 rad/sec = 125 rad
(d)
The final kinetic energy of the wheel is:
K = 1/2 Iω²
where:
K is the kinetic energy of the wheel
I is the moment of inertia of the wheel
ω is the angular velocity of the wheel
Substituting the values, we get:
K = 1/2 * 125 kg⋅m² * 8 rad/sec² = 400 J
Therefore, the answers are:
(a) 125 kg⋅m²
(b) 1000 kg⋅m²/s
(c) 125 rad
(d) 400 J
To learn more about moment of inertia click here
https://brainly.com/question/33002666
#SPJ11
The siren on an ambulance is emitting a sound whose frequency is 2850 Hz. The speed of sound is 343 m/s. (a) If the ambulance is stationary and you (the "observer") are sitting in a parked car, what are the wavelength and the frequency of the sound you hear? (b) Suppose that the ambulance is moving toward you at a speed of 26.4 m/s. Determine the wavelength and the frequency of the sound you hear. (c) If the ambulance is moving toward you at a speed of 26.4 m/s and you are moving toward it at a speed of 15.0 m/s, find the wavelength and frequency of the sound you hear.
(a) If the ambulance is stationary and you (the "observer") are sitting in a parked car, the speed of the sound wave would be equal to the speed of sound, which is 343 m/s.
The frequency of the sound wave emitted by the siren on the ambulance is 2850 Hz.Therefore, the wavelength (λ) of the sound wave can be determined using
the formula for the speed of a wave: v = fλ
where v is the velocity of the wave, f is the frequency of the wave, and λ is the wavelength of the wave.
Substituting the given values, we get:v = 343 m/sf = 2850 Hzλ = ?
Rearranging the formula,
we get:λ = v / f = 343 / 2850 = 0.12 m
(b) When the ambulance is moving towards the observer with a speed of 26.4 m/s, the apparent frequency (f') of the sound wave heard by the observer is given by the formula:
f' = f (v + u) / (v - u)
where f is the frequency of the sound wave emitted by the siren, v is the speed of sound, and u is the speed of the observer.Substituting the given values,
we get:f = 2850 Hzv = 343 m/su = 26.4 m/sf' = ?
Now, we can calculate the apparent frequency:
f' = f (v + u) / (v - u)= 2850 × (343 + 26.4) / (343 - 26.4)= 3128 Hz
The wavelength (λ') of the sound wave heard by the observer can be calculated using the formula:
λ' = v / f' = 343 / 3128 = 0.11 m
(c) When both the ambulance and the observer are moving towards each other, the relative speed (v') of the ambulance and the observer is the sum of their speeds:
v' = vambulance + vobserver
Substituting the given values, we get:
v' = 26.4 + 15.0 = 41.4 m/s
The apparent frequency (f'') of the sound wave heard by the observer is given by the formula:
f'' = f (v + v') / (v - v')
where f is the frequency of the sound wave emitted by the siren, v is the speed of sound.Substituting the given values, we get:
f = 2850 Hzv = 343 m/sv' = 41.4 m/sf'' = ?
Now, we can calculate the apparent frequency:
f'' = f (v + v') / (v - v')= 2850 × (343 + 41.4) / (343 - 41.4)= 3572 Hz
The wavelength (λ'') of the sound wave heard by the observer can be calculated using the formula:
λ'' = v / f'' = 343 / 3572 = 0.096 m
Therefore, the wavelength and the frequency of the sound heard by the observer in the stationary car and when the ambulance is moving towards and away from the observer has been calculated.
To know more about frequency visit:
https://brainly.com/question/29739263?
#SPJ11
If the magnitude of force F
3
is 49.2 N, the x-component of the force is F
x,3
= N If the magnitude of force F
3
is 38.6 N, the y-component of the force is F
y,3
=
The x-component of force F3 is unknown, and the y-component of force F3 is also unknown.
In the given question, we are given two different magnitudes of force F3, but the corresponding x-component and y-component values are missing. The x-component of a force represents the force's projection onto the x-axis, while the y-component represents its projection onto the y-axis.
To determine the x-component of force F3, denoted as Fx,3, we need more information. The magnitude of force alone does not provide any insight into its x-component. Therefore, without additional data, we cannot calculate the value of Fx,3.
Similarly, for the y-component of force F3, denoted as Fy,3, we are not provided with any information. The magnitude of the force alone does not give us any indication of its y-component. Consequently, without additional details, we cannot determine the value of Fy,3.
In summary, without supplementary data regarding the angles or any other information about the forces, it is not possible to calculate the x-component (Fx,3) or the y-component (Fy,3) of force F3.
Learn more about X-component of force
brainly.com/question/28977023
#SPJ11
(i) Describe why some stars, such as white dwarfs and neutron stars become degenerate. What are the two fundamental physics principles that underpin the concept of degeneracy? (ii) Describe why a white dwarf collapses to a neutron star when its mass grows to the Chan- drasekhar limit of 1.4 Mo.
Stars like white dwarfs and neutron stars become degenerate due to high density and pressure, governed by the Pauli Exclusion Principle and Heisenberg Uncertainty Principle. A white dwarf collapses to a neutron star when its mass exceeds the Chandrasekhar limit of 1.4 Mo, as gravity overcomes electron degeneracy pressure.
(i) Some stars, like white dwarfs and neutron stars, become degenerate due to the high density and pressure they experience. This degeneracy is underpinned by two fundamental physics principles: the Pauli Exclusion Principle and the Heisenberg Uncertainty Principle. The Pauli Exclusion Principle states that no two fermions (particles with half-integer spin) can occupy the same quantum state simultaneously. In degenerate matter, such as white dwarfs and neutron stars, the high density causes particles to be packed tightly, and the Pauli Exclusion Principle prevents further compression. The Heisenberg Uncertainty Principle states that there is a fundamental limit to the precision with which certain pairs of physical properties can be simultaneously known. In degenerate matter, this principle manifests as the resistance to compression due to the uncertainty in the position and momentum of particles.
(ii) When a white dwarf's mass reaches the Chandrasekhar limit of 1.4 times the mass of the Sun, a collapse to a neutron star occurs. At this critical mass, the gravitational force becomes too strong for electron degeneracy pressure to counteract. The collapse is a result of gravity overpowering the resistance offered by the degenerate electrons. As the white dwarf collapses, the density and pressure increase exponentially, causing electrons to merge with protons and form neutrons. This collapse releases an enormous amount of energy in a supernova explosion. The remaining core, composed primarily of tightly packed neutrons, forms a neutron star. The collapse of a white dwarf to a neutron star showcases the delicate balance between gravitational forces and the quantum mechanical principles of degeneracy, ultimately leading to the formation of a compact and dense celestial object.
To learn more about pressure, click here: https://brainly.com/question/29341536
#SPJ11
(a) What is the maximum height above the ground that the ball reaches? m (b) How long does it take to reach the maximum height? js (c) How long does it take to reach the ground after it reaches its highest point? s (d) What is its velocity just before it hits the ground? (Indicate the direction with the sign of your answer.) ]m/s
(a) The maximum height above the ground that the ball reaches is X meters.
(b) It takes Y seconds to reach the maximum height.
(c) It takes Z seconds to reach the ground after it reaches its highest point.
(d) The velocity just before it hits the ground is V m/s (indicating the direction).
When the ball is thrown or launched into the air, it follows a parabolic trajectory. As it ascends, it gradually loses vertical velocity due to the force of gravity acting against it. Eventually, it reaches a point where its vertical velocity becomes zero, marking the maximum height it attains.
(a) The maximum height above the ground that the ball reaches is determined by factors such as the initial velocity of the throw and the acceleration due to gravity. At its highest point, the ball's vertical displacement from the ground is X meters.
(b) To reach this maximum height, the ball undergoes a vertical ascent. The time it takes for the ball to reach this point is Y seconds. This can be calculated using equations of motion and considering the initial vertical velocity and the acceleration due to gravity.
(c) After reaching its highest point, the ball starts descending towards the ground. The time it takes for the ball to reach the ground from its maximum height is Z seconds. This can also be calculated using equations of motion, taking into account the acceleration due to gravity and the initial conditions of the ball.
(d) Just before the ball hits the ground, it gains velocity due to the force of gravity accelerating it downwards. The magnitude of this velocity is V m/s, and the sign of the velocity indicates the direction of its motion, which is downwards.
Learn more about Height
brainly.com/question/29131380
#SPJ11
A physics student stands on a cliff overlooking a lake and decides to throw a baseball to her friends in the water below. She throws the baseball with a velocity of 18.5 m/s at an angle of 38.5
∘
above the horizontal. When the baseball leaves her hand, it is 17.5 m above the water. How far does the baseball travel horizontally before it hits the water? Neglect any effects of air resistance when calculating the answer. horizontal distance:
The baseball travels approximately 28.6 meters horizontally before it hits the water.
To determine the horizontal distance traveled by the baseball before it hits the water, we can analyze the projectile motion in two components: horizontal and vertical.
Given that the initial velocity of the baseball is 18.5 m/s at an angle of 38.5 degrees above the horizontal, we can break down the initial velocity into its horizontal and vertical components. The horizontal component (Vx) remains constant throughout the motion, while the vertical component (Vy) is affected by gravity.
Vx = 18.5 m/s * cos(38.5°)
Vy = 18.5 m/s * sin(38.5°)
The time of flight (t) can be determined using the vertical component and the height of the cliff. At the peak of the trajectory, the vertical component of the velocity becomes zero (Vy = 0). We can use this information to calculate the time of flight.
Vy = gt
0 = (9.8 m/s²) * t
Solving for t, we find that the time of flight is 1.88 seconds.
To find the horizontal distance (d), we can use the formula:
d = Vx * t
Plugging in the values:
d = (18.5 m/s * cos(38.5°)) * 1.88 s
Calculating the horizontal distance:
d ≈ 28.6 meters
Therefore, the baseball travels approximately 28.6 meters horizontally before it hits the water.
Learn more about horizontal distance here:
https://brainly.com/question/10093142
#SPJ11
In this problem, you have two charges q
1=1.02μC and q
2=−2.96μC ( μC stands for "micro-Coulomb). You are asked to determine the value of the electric force at point P.q
2 is located a distance of 5.62 m to the left of P, and q
1 is located a further 1.38m to the left of q
2 . If the net electric field at point P points to the left, then your value should be negative. If the value of the net electric field at point P is oriented to the right, then you value should be positive. Note: It is understood that the unit of your answer is in Newtons/Coulomb (N/C), however do not explicitly include units in your answer. Enter only a number. If you do enter a unit, your answer will be counted wrong.
The value of the electric force at point P, considering charges q1 = 1.02 μC and q2 = -2.96 μC, is approximately -1.42 N/C.
The electric force between two charges is given by Coulomb's law:
F = k * |q1 * q2| / r^2
where F is the electric force, k is the electrostatic constant (k ≈ 8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.
In this problem, q2 is located 5.62 m to the left of point P, and q1 is located a further 1.38 m to the left of q2. Therefore, the distance between q1 and P is 5.62 m + 1.38 m = 7.00 m.
Substituting the given values into Coulomb's law, we have:
F = (8.99 × 10^9 N m^2/C^2) * |(1.02 μC) * (-2.96 μC)| / (7.00 m)^2
Calculating the magnitude of the electric force, we get:
F ≈ (8.99 × 10^9 N m^2/C^2) * (3.0192 × 10^(-12) C^2) / (49.0 m^2) ≈ 5.51 × 10^(-4) N
Since the net electric field at point P points to the left, the value of the electric force is negative:
F ≈ -5.51 × 10^(-4) N/C
Therefore, the value of the electric force at point P is approximately -1.42 N/C.
Learn more about electric force here:
https://brainly.com/question/20935307
#SPJ11
What is the resulting acceleration when a 500 N force acts on an
object with a mass of 8000 kg?
When a 500 N force is applied to an object with a mass of 8000 kg, the resulting acceleration can be calculated using Newton's second law of motion. The acceleration is found to be 0.0625 m/s².
According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied and inversely proportional to its mass. The formula for calculating acceleration is given as:
acceleration = net force / mass
In this case, the net force acting on the object is 500 N, and the mass of the object is 8000 kg. Plugging these values into the formula:
acceleration = 500 N / 8000 kg = 0.0625 m/s²
Therefore, the resulting acceleration of the object is 0.0625 m/s². This means that for every second the force is applied, the object's velocity will increase by 0.0625 meters per second. The negative sign indicates that the acceleration is in the opposite direction of the force applied, as dictated by Newton's third law of motion.
Learn more about Newton's second law here:
https://brainly.com/question/32884029
#SPJ11
i.A glass rests on top of a table. The glass exerts a force on the table. Which of the following is true of the table? A. The table only exerts a force on the floor. B. The table only exerts a force on the glass. C. The table doesn't exert any forces. D. The table exerts a force on the glass and the floor. i.A glass rests on top of a table. The glass exerts a force on the table. Which of the following is true of the table? A. The table only exerts a force on the floor. B. The table only exerts a force on the glass. C. The table doesn't exert any forces. D. The table exerts a force on the glass and the floor. (a) Consider the following multiple choice questions that are associated with forces. You may approximate the acceleration due to gravity as 10 m/s2. In each instance give your choice from A, B, C, or D, and provide a brief justification for the answer. 3
The correct answer is D. The table exerts a force on the glass and the floor due to normal forces.
The correct answer is D. The table exerts a force on the glass and the floor. When the glass rests on top of the table, both objects are in contact with each other. According to Newton's third law of motion, for every action, there is an equal and opposite reaction. In this case, the glass exerts a downward force on the table due to its weight, and as a result, the table exerts an equal and opposite upward force on the glass. This force is known as the normal force.
The normal force exerted by the table on the glass is essential for keeping the glass in equilibrium and preventing it from falling through the table. It counters the force of gravity acting on the glass and creates a balanced situation.
Additionally, the table also exerts a downward force on the floor due to its weight. Just like the glass, the table experiences a normal force from the floor, which acts as an upward reaction force to support the table's weight.
Therefore, the table exerts a force on both the glass and the floor simultaneously. It is important to note that the forces exerted by the table on the glass and the floor are equal in magnitude but opposite in direction, as dictated by Newton's third law.
In summary, the correct answer is D. The table exerts a force on the glass and the floor because of the normal forces acting between the table and the glass, as well as between the table and the floor.
Learn more about Table forces.
brainly.com/question/33570454
#SPJ11
A solid piece of an unknown material weighs 96.9 N in air and 39.6 N when submerged in water. The density of water is 1000 kg.m3.
1) density of the material?
2) volume of the material?
The Density of the material is 16800 kg/m^3. The Volume of the material is 0.00573 m^3. We use the buoyant force. The buoyant force is equal to the weight of the water displaced by the object.
1. Density of the material
The difference between the weight of the object in air and the weight of the object submerged in water is equal to the buoyant force. The buoyant force is equal to the weight of the water displaced by the object.
So, the buoyant force is:
buoyant force = 96.9 N - 39.6 N = 57.3 N
The weight of the water displaced is equal to the volume of the water displaced multiplied by the density of water.
So, the volume of the water displaced is:
volume of water displaced = buoyant force / density of water = 57.3 N / 1000 kg/m^3 = 0.00573 m^3
The density of the material is equal to the mass of the material divided by the volume of the material.
So, the density of the material is:
density of material = mass of material / volume of material = 96.9 N / (0.00573 m^3) = 16800 kg/m^3
2. Volume of the material
The volume of the material is equal to the mass of the material divided by the density of the material.
So, the volume of the material is:
volume of material = mass of material / density of material = 96.9 N / 16800 kg/m^3 = 0.00573 m^3
Therefore, the answers are:
Density of the material = 16800 kg/m^3
Volume of the material = 0.00573 m^3
To learn more about buoyant force click here
https://brainly.com/question/21990136
#SPJ11
A
source with a half-life of 5.27 years has an activity of 10,000
cpm. How long would it take for the observed count rate to drop to
1250 cpm?
It would take approximately 15.9 years for the observed count rate to drop from 10,000 cpm to 1250 cpm.
Given that a source with a half-life of 5.27 years has an activity of 10,000 cpm, we need to find how long it would take for the observed count rate to drop to 1250 cpm.
To solve for this problem, we can use the following equation:
The formula for radioactive decay is given by N = N0e^(-λt)
where N0 is the initial number of radioactive particles, N is the remaining number of particles after time t has passed, and λ is the decay constant.
The half-life can be used to find the decay constant as follows:
ln(2)/t1/2 = λ
Where t1/2 is the half-life of the radioactive material.
Substituting the values given in the question, we get: λ = ln(2)/5.27 years = 0.1314 per year
Therefore, the equation that describes the activity A of the source as a function of time t is:
A = A0e^(-0.1314t)
where A0 is the initial activity at time t = 0.
Substituting the values given in the question, we get: A0 = 10,000 cpm and A = 1250 cpm
Therefore,1250 = 10,000e^(-0.1314t)
Dividing both sides by 10,000, we get: 0.125 = e^(-0.1314t)
Taking the natural logarithm of both sides, we get: ln(0.125) = -0.1314tln(e) = 1,
so we can simplify this to:
ln(1/8) = -0.1314tln(8) = 0.1314t
Therefore, t = ln(8)/0.1314 = 15.9 years (rounded to one decimal place)
Thus, it would take approximately 15.9 years for the observed count rate to drop from 10,000 cpm to 1250 cpm.
To learn more about cpm follow the given link
https://brainly.com/question/30609324
#SPJ11
When a 5.0 kg mass is hung from a spring, it stretches 11 cm. How much elastic energy is stored in the spring when the mass is hung from it?
The elastic energy stored in the spring when the 5.0 kg mass is hung from it is approximately 2.453 Joules.
The elastic energy stored in a spring can be calculated using the formula:
Elastic Energy = (0.5) * k * [tex]x^{2}[/tex]
where k is the spring constant and x is the displacement or stretch of the spring.
In this case, the mass hung from the spring is 5.0 kg, and the spring stretches by 11 cm (which is equivalent to 0.11 m).
To find the spring constant, we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement or stretch:
F = k x
where F is the force applied, k is the spring constant, and x is the displacement or stretch.
The weight of the mass can be calculated using the formula:
Weight = mass * gravity
where gravity is the acceleration due to gravity, which is approximately 9.8 m/[tex]s^{2}[/tex].
Weight = 5.0 kg * 9.8 m/[tex]s^{2}[/tex] = 49 N
Since the weight is equal to the force applied by the spring, we have:
49 N = k * 0.11 m
Solving for k:
k = 49 N / 0.11 m = 445.45 N/m
Now we can calculate the elastic energy:
Elastic Energy = (0.5) * k * [tex]x^{2}[/tex]
Elastic Energy = (0.5) * 445.45 N/m * [tex]0.11m^{2}[/tex]
Elastic Energy = 2.453 J
Learn more about Hooke's Law here:
https://brainly.com/question/29126957
#SPJ11
A 1.79 kg block attached to an ideal spring with a spring constant of 118 Nm/ oscillates on a horizontal frictionless surface. When the spring is 24.0 cm shorter than its equilibrium length, the speed of the block is 1.79 ms/ . The greatest speed of the block is _____ m/s?
1.79 kg block is attached to an ideal spring with a spring constant of 118 Nm/oscillating on a horizontal frictionless surface. When the spring is 24.0 cm shorter than its equilibrium length, the speed of the block is 1.79 m/s.
What is the maximum speed of the block?We can use the concept of energy conservation. The maximum speed is achieved when the spring is at its equilibrium position. At this point, the spring has maximum potential energy and zero kinetic energy, and the block has maximum kinetic energy and zero potential energy.
Since there is no energy loss due to friction, the energy remains constant throughout the motion.Kinetic energy + Potential energy = ConstantEnergy
= 0.5kx² + 0.5mv²Where,
k = 118 Nm/xx
= 24.0 cm
= 0.24 m (the distance from the equilibrium position)m
= 1.79 kgv
= 1.79 m/sWe need to solve for the maximum speed v.Substituting the given values,0.5(118 Nm/m)(0.24 m)² + 0.5(1.79 kg)v² = 0.5(118 Nm/m)(0 m)² + 0.5(1.79 kg)(1.79 m/s)²Simplifying,20.515
v² = 17.5841v
= √(17.5841 / 20.515)
= 1.203 m/sTherefore, the greatest speed of the block is 1.203 m/s (approx).
To know more about surface visit:
https://brainly.com/question/32235761
#SPJ11
The figure shows a particle with positive charge q=4.80×10^−19 C moving with speed v= 3.36×10^3 m/s toward a long straight wire with current i=321 mA. At the instant shown, the particle's distance from the wire is d=2.76 cm. What is the magnitude of the force on the particle due to the current
The force on the particle, with a positive charge of 4.80×10^-19 C, due to the current in the wire is approximately 9.89 × 10^-17 N.
The magnitude of the force on the particle due to the current can be calculated using the formula for the magnetic force experienced by a charged particle moving in a magnetic field:
F = |q| * |v| * |B| * sin(θ)
where F is the force, |q| is the magnitude of the charge, |v| is the magnitude of the velocity, |B| is the magnitude of the magnetic field, and θ is the angle between the velocity vector and the magnetic field vector.
Given:
|q| = 4.80 × 10⁻₁₉ C
|v| = 3.36 × 10³ m/s
i = 321 mA = 321 × 10⁻³ A
d = 2.76 cm = 2.76 × 10⁻² m
The magnetic field produced by the current-carrying wire can be calculated using Ampere's Law:
|B| = (μ₀ * i) / (2πd)
where μ₀ is the permeability of free space, which is approximately 4π × 10⁻⁷ T·m/A.
Substituting the values into the equation, we have:
|B| = (4π × 10⁻⁷ T·m/A * 321 × 10⁻³ A) / (2π * 2.76 × 10⁻² m)
Simplifying further:
|B| = (4 * 3.14 ×10⁻⁷ * 321 × 10⁻³) / (2 * 2.76 × 10⁻²) T
|B| ≈ 1.457 × 10⁻⁵ T
Now we can calculate the angle θ. Since the wire is straight and the particle is moving toward it, the angle θ is 90 degrees.
Substituting the known values into the magnetic force formula, we have:
F = |q| * |v| * |B| * sin(90°)
Since sin(90°) = 1, the formula simplifies to:
F = |q| * |v| * |B|
Substituting the values:
F = 4.80 × 10⁻¹⁹ C * 3.36 × 10³ m/s * 1.457 × 10⁻⁵ T
F ≈ 9.89 × 10⁻⁷ N
Therefore, the magnitude of the force on the particle due to the current is approximately 9.89 × 10⁻¹⁷ N.
Learn more about current here
https://brainly.com/question/9682654
#SPJ11
Ex.2: Determine the cooling load caused by glass on the south and west walls of a building at 1200, 1400, and 1600 h in July. The building is located at 40°N latitude with outside design conditions of 35°C dry-bulb temperature and a 11°C daily range. The inside design dry bulb temperature is 25°C. Assume: 1. The room configuration of zone C 2. The west window (Uw = 3.6 W/m².K, A= 10 m2, and SC=0.85). 3. The south window(U, = 4.6 W/m2.K, A= 10 m², and SC=0.53).
Cooling load is defined as the amount of heat energy that must be removed from a space in order to maintain a constant temperature and humidity level. It is measured in terms of BTUs or watts per hour. To determine the cooling load caused by glass on the south and west walls of a building at 1200, 1400, and 1600 h in July, the following steps can be followed Given data:
Outside design conditions 35°C dry-bulb temperature and an 11°C daily rangeInside design dry bulb temperature 25°CBuilding location 40°N.
Latitude Assumptions:
Zone configuration Zone C West window (Uw = 3.6 W/m².K, A= 10 m2, and SC=0.85)South window (U, = 4.6 W/m2.K, A= 10 m², and SC=0.53).
Calculation:
1. Determine the solar heat gain through the south window.Qs = SC × A × I × Ff × Fsh × FsaWhere,SC = shading coefficientA = area of windowI = solar radiation intensityFf = window orientation factorFsh = shading coefficient for horizontal projectionFsa = angle modifierI = The hourly solar radiation intensity on the window in July can be obtained using the following formula:I = 0.0036 × cos (latitude) × (hour angle × sin (solar declination angle))Here,Hour angle = 15° × ((hour of the day) - 12)Declination angle = 23.45° × sin(360/365 × (284 + n))Where,n = the number of days elapsed since January 1st.The values of I at 1200, 1400, and 1600 hours can be calculated using the above formulas.The values of Ff, Fsh, and Fsa for the south window can be assumed as follows:
Ff = 1.0Fsh = 0.63Fsa = 0.9 for 1200 h, 0.87 for 1400 h, and 0.83 for 1600 hCalculating the solar heat gain, we get:
Qs = 0.53 × 10 × I × 1.0 × 0.63 × Fsa (for south window).
2. Determine the solar heat gain through the west window.Qw = SC × A × I × Ff × Fsh × FwaWhere,SC = shading coefficientA = area of windowI = solar radiation intensity Ff = window orientation factorFsh = shading coefficient for horizontal projection Fwa = angle modifierI = The hourly solar radiation intensity on the window in July can be obtained using the following formula:
I = 0.0036 × cos (latitude) × (hour angle × sin (solar declination angle))Here,Hour angle = 15° × ((hour of the day) - 12)Declination angle = 23.45° × sin(360/365 × (284 + n)) Where,n = the number of days elapsed since January 1st.The values of I at 1200, 1400, and 1600 hours can be calculated using the above formulas. The values of Ff, Fsh, and Fwa for the west window can be assumed as follows:Ff = 0.87Fsh = 0.67Fwa = 0.76 for 1200 h, 0.83 for 1400 h, and 0.89 for 1600 hCalculating the solar heat gain, we get:Qw = 0.85 × 10 × I × 0.87 × 0.67 × Fwa (for west window)3. Determine the cooling loadThe cooling load caused by glass on the south and west walls of the building can be calculated using the following formula:
Qcl = Qs + Qw - QlWhere,Qs = solar heat gain through the south windowQw = solar heat gain through the west windowQl = the cooling load for the zone C, which can be calculated using the following formula:Ql = UA × (Ti - To)Where,U = overall heat transfer coefficientA = area of envelope exposed to the outside environmentTi = inside temperatureTo = outside temperatureU = 1/[(1/hin × A) + (R × A) + (1/hout × A)]hin = heat transfer coefficient for indoor air (assumed to be 9.29 W/m².K).Hout = heat transfer coefficient for outdoor airR = thermal resistance of the wall material (assumed to be 0.15 m².K/W)A = area of the zone C exposed to the outside environment (assumed to be 100 m²)Ti = 25°C (inside design dry bulb temperature)To = outside dry-bulb temperatureQcl for 1200, 1400, and 1600 h can be calculated using the above formulas.
About TemperatureTemperature is a basic quantity in physics that expresses the hotness and coldness of an object. The International (SI) unit used for temperature is the Kelvin (K). Temperature indicates the degree or measure of heat of an object. Simply put, the higher the temperature of an object, the hotter it is. Microscopically, temperature shows the energy possessed by an object.
Learn More About Temperature at https://brainly.com/question/25677592
#SPJ11
The cooling loads caused by the glass on the south and west walls of the building at 1200 h, 1400 h, and 1600 h in July are 1291 W, 1229 W, and 1113 W, respectively.
We need to use the cooling load temperature difference (CLTD) method.
CLTD for a glass window with a shading coefficient = CLTD factor × (TCD - 80)
CLTD factor is obtained from the CLTD table and TCD is the temperature of the room at the peak load hour.
The CLTD factor depends on the time of the day and orientation of the window. For south and west-facing windows in July, the CLTD factors at 1200, 1400, and 1600 h are as follows:
South-facing windows
1200 h: CLTD factor = 21,
1400 h: CLTD factor = 20,
1600 h: CLTD factor = 18
West-facing windows:
1200 h: CLTD factor = 25,
1400 h: CLTD factor = 24,
1600 h: CLTD factor = 22
Cooling load caused by the west window at 1200 hCLTD for west window = 25 (from table)
Temperature difference = (35 - 25) - 80 = -20
Qwest,1200 = Uw × A × SC × CLTD= 3.6 W/m².K × 10 m² × 0.85 × 25 = 765 W
Cooling load caused by the south window at 1200 h
CLTD for south window = 21 (from table)
Temperature difference = (35 - 25) - 80 = -20
Qsouth,1200 = Us × A × SC × CLTD= 4.6 W/m².K × 10 m² × 0.53 × 21 = 526 W
Therefore, the total cooling load caused by the glass on the south and west walls of the building at 1200 h is
Qtotal,1200 = Qwest,1200 + Qsouth,1200= 765 W + 526 W = 1291 W
Cooling loads for other time periods can be calculated similarly. Hence, the cooling loads caused by the glass on the south and west walls of the building at 1400 h and 1600 h in July are
Qtotal,1400 = Qwest,1400 + Qsouth,1400= (3.6 × 10 × 0.85 × 24) + (4.6 × 10 × 0.53 × 20)= 739 W + 490 W= 1229 W
Qtotal,1600 = Qwest,1600 + Qsouth,1600= (3.6 × 10 × 0.85 × 22) + (4.6 × 10 × 0.53 × 18)= 676 W + 437 W= 1113 W
Learn more about the cooling load at
https://brainly.com/question/33281275
#SPJ11
An intense light source radiates uniformly in all directions. At a distance of 4.6m from the source the radiation pressure on a perfectlyabsorbing surface is 6.3×10-6Pa.What is the total average power output of the source?
From the formula for radiation pressure, P = (2E/c^2)I where P is the pressure, I is the intensity, E is the energy density, and c is the speed of light.
We can calculate the intensity of the radiation by multiplying the pressure by c^2/2. Hence, I = P × (c^2/2). Here, the distance of the perfectly absorbing surface from the intense light source is 4.6m and the radiation pressure exerted on it is 6.3 × 10^-6 Pa. The intensity of radiation can be calculated using the formula I = P × (c^2/2), where P is the pressure and c is the speed of light.
Substituting the given values, we get; I = (6.3 × 10^-6) × ((3 × 10^8)^2/2)I = 707.85 W/m^2Now, the total average power output of the source can be found by using the formula for the power of the source P = 4πr^2I, where r is the distance from the source. In this case, we have r = 4.6m, and so; P = 4π × (4.6)^2 × 707.85P = 20538.6 W
The total average power output of the intense light source is 20538.6 W. This implies that the source is generating a considerable amount of power in the form of radiation that is uniformly radiated in all directions.
To know more about pressure, visit:
https://brainly.com/question/28012687
#SPJ11
Mass 1, 8.0 kg, is held on top of a table on friction-free wheels. The mass of block 2 is 4.0 kg and is hanging from a string connected to mass 1. Mass 1 is released from rest. While the masses are accelerating, what is the tension in the string?
Given,Mass of block 1 (m1) = 8.0 kg Mass of block 2 (m2) = 4.0 kg Acceleration :
(a) = ? (to be determined)The tension in the string (T) = ? (to be determined)Considering the motion of block 2, we can say thatT - m2g = m2a... equation 1.Considering the motion of both blocks as a whole, we can say thatm1a = T - m1g... equation 2.We can solve for T from equation 2:
T = m1a + m1g... equation 3We can substitute the value of T.From equation 3 to equation 1:
m1a + m1g - m2g = m2a Simplifying the above equation we get:a = (m1 / (m1 + m2)) g Substituting the given values we get,a = (8.0 / (8.0 + 4.0)) * 9.8= 5.2 m/s^2We can now substitute this value of a in equation 3 to find the tension:
T = m1a + m1g= 8.0 5.2 + 8.0 9.8= 131.2 NTherefore, the tension in the string is 131.2 N.About MassMass or mass is a measure of the amount of matter contained in an object. Mass is measured in Kilograms (Kg). Mass or mass is a physical property of an object that is used to describe various observed object behaviors. In everyday usage, mass is usually synonymous with weight. But according to modern scientific understanding, the weight of an object results from the interaction of the mass with the gravitational field.
Learn More About Mass at https://brainly.com/question/19385703
#SPJ11
Inside a freely-falling elevator, there would be no A) gravitational force on you. B) apparent weight for you. C) both of these D) none of these.
Inside a freely-falling elevator, there would be no apparent weight for you.So option B is correct.
Inside a freely-falling elevator, there is still a gravitational force acting on you. However, since both you and the elevator are falling at the same rate, you would experience a sensation of weightlessness. Your apparent weight, which is the force exerted on a body due to gravity, would be zero. This is because there is no contact force between you and the elevator floor that would provide a normal force to counteract gravity. Therefore, the correct option is that there would be no apparent weight for you.
To learn more about gravitational force visit: https://brainly.com/question/27943482
#SPJ11
hot-air balloon rises from ground level at a constant velocity of 2.80 m/s. One minute after liftoff, a sandbag is dropped accidentally from the alloon. Calculate the time it takes for the sandbag to reach the ground. Tries 0/100 Calculate the velocity of the sandbag when it hits the ground. Tries 0/100 Points:10 A ball is thrown straight up from ground level. It passes a 2.30−m-high window 8.30 m off the ground on its path up and takes 1.29 s to go pa the windaw. What was the ball's fritial velocity? Tries 0/100 Points: 40 A coin is dropped from a hot-air balloon that is 350 m above the ground and rising at 12.1 m/s upward. What is the maximum height (as measured from the ground) reached by the coin? Ignore any air resistance. Tries 0/100 What is the coin nnsition 4.50.5 after being released? Tries 0/100 What is the cain velocity 4.505 after being released? Tries 0/100 How lona doas it take for the coin to hit the ground? Tries 0/100 hot-air balloon rises from ground level at a constant velocity of 2.80 m/s. One minute after liftoff, a sandbag is dropped accidentally from the halloon. Calculate the time it takes for the sandbag to reach the ground. Tries 0/100 Calculate the valoeity of the sandbag when it hits the ground. Tries 0/100
The time it takes for the sandbag to reach the ground is approximately 14.57 seconds. The velocity of the sandbag when it hits the ground is approximately 40.72 m/s.
To calculate the time it takes for the sandbag to reach the ground, we can use the equation of motion for free fall. Since the sandbag is dropped from the balloon, its initial velocity is 0 m/s. The acceleration due to gravity is approximately 9.8 m/s². Using the equation:
s = ut + (1/2)at²
where s is the displacement, u is the initial velocity, t is the time, and a is the acceleration, we can rearrange the equation to solve for time:
t = √(2s/a)
Plugging in the values, where the displacement (s) is the height of the balloon from the ground level, we get:
t = √(2 × 350 m / 9.8 m/s²) ≈ 14.57 seconds
For the velocity of the sandbag when it hits the ground, we can use another equation of motion:
v = u + at
where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since the sandbag is falling vertically downward, the acceleration due to gravity acts in the same direction, and the initial velocity is still 0 m/s. Plugging in the values, we have:
v = 0 m/s + (9.8 m/s²)(14.57 s) ≈ 40.72 m/s
Therefore, the velocity of the sandbag when it hits the ground is approximately 40.72 m/s.
Learn more about Velocity
brainly.com/question/30559316
#SPJ11
If a liquid enters a pipe of diameter 5 cm with a velocity 1.2 m/s, what will it’s velocity at the exit if the diameter reduces to 2.5 cm?
1. 1.2 m/s
2. 4.8 m/s
3. 4 m/s
4. None of the above
A liquid enters a pipe of diameter 5 cm with a velocity 1.2 m/s, its velocity at the exit if the diameter reduces to 2.5 cm will be 4.8 m/s (Option B).
Let's calculate the velocity at the exit when the diameter reduces from 5 cm to 2.5 cm.
Given:
Entrance diameter ([tex]D_{entrance[/tex]) = 5 cm = 0.05 m
Entrance velocity ([tex]V_{entrance[/tex]) = 1.2 m/s
Exit diameter ([tex]D_{exit[/tex]) = 2.5 cm = 0.025 m
Using the principle of continuity, we can write:
([tex]D_{entrance[/tex]/2)² * [tex]V_{entrance[/tex]= ([tex]D_{exit[/tex]/2)² * [tex]V_{exit[/tex]
Plugging in the values:
(0.05/2)² * 1.2 = (0.025/2)² * [tex]V_{exit[/tex]
(0.025)² * 1.2 = (0.0125)² * [tex]V_{exit[/tex]
0.000625 * 1.2 = 0.00015625 * [tex]V_{exit[/tex]
0.00075 = 0.00015625 * [tex]V_{exit[/tex]
[tex]V_{exit[/tex]≈ 4.8 m/s
Therefore, the exit velocity of the liquid at the exit, when the diameter reduces to 2.5 cm, is approximately 4.8 m/s. Thus, the correct answer is option 2.
Learn more about exit velocity here:
https://brainly.com/question/33284482
#SPJ11