1. The Bad Debts Expense for Alvare Company's estimated bad debts, calculated as 0.5% of annual credit sales, is $4,375.
2. On its December 31 balance sheet, Accounts Receivable will be reported at $875,000, while the Allowance for Doubtful Accounts will be shown as a contra-asset account with a balance of $4,625.
1. To calculate the Bad Debts Expense, Alvare Company multiplies its annual credit sales of $875,000 by the estimated bad debt rate of 0.5% (or 0.005). The calculation is as follows: $875,000 * 0.005 = $4,375. This amount represents the estimated portion of credit sales that Alvare expects will not be collected.
2. On the December 31 balance sheet, Accounts Receivable is reported at its full value of $875,000 since no specific accounts have been identified as uncollectible yet. However, the company also needs to report the potential loss from bad debts by including the Allowance for Doubtful Accounts as a contra-asset account. The Allowance for Doubtful Accounts is calculated by subtracting the credit tolerance (or specific doubtful amount) of $250 from the Bad Debts Expense estimate of $4,375. Therefore, the balance sheet will show Accounts Receivable at $875,000 and the Allowance for Doubtful Accounts at $4,625.
3. On February 1, when Alvare Company determines that R. Coble's $420 account is uncollectible, it needs to record this as a bad debt expense. The journal entry would debit the Allowance for Doubtful Accounts and credit Accounts Receivable. The entry would appear as follows:
Debit: Allowance for Doubtful Accounts $420
Credit: Accounts Receivable $420
By writing off the uncollectible amount, Alvare reduces the balance in Accounts Receivable and the Allowance for Doubtful Accounts by the same amount, reflecting the specific bad debt and maintaining the balance between the two accounts.
Learn more about Accounts here:
https://brainly.com/question/29608710
#SPJ11
Strategic Management is outdated in today turbulent world.
Explain with 5 examples
Strategic management remains relevant in today's turbulent world as it provides a framework to navigate uncertainty, adapt to change, and capitalize on opportunities.
While it is true that the business landscape is becoming increasingly volatile and unpredictable, strategic management continues to play a vital role in guiding organizations through turbulent times. Here are five examples that demonstrate the relevance of strategic management in today's world:
1. Agile Decision-Making: Strategic management enables organizations to adopt agile decision-making processes, allowing them to respond quickly to changing market conditions and seize emerging opportunities.
2. Scenario Planning: Strategic management frameworks, such as scenario planning, help organizations anticipate and prepare for multiple possible futures, considering various scenarios and their potential impacts on the business.
3. Innovation and Disruption: Strategic management encourages organizations to embrace innovation and disruptive technologies, helping them stay ahead of competitors and adapt to evolving customer needs and preferences.
4. Risk Management: Strategic management provides tools and techniques for assessing and managing risks, allowing organizations to identify potential threats, develop contingency plans, and minimize negative impacts on their operations.
5. Sustainable Competitive Advantage: Strategic management helps organizations build and sustain competitive advantage by analyzing their internal strengths, external opportunities, and competitive landscape. It guides them in developing unique value propositions, differentiation strategies, and long-term success.
In summary, while the business environment may be turbulent, strategic management remains essential for organizations to navigate uncertainty, seize opportunities, and achieve sustainable success in today's dynamic world.
To learn more about management, click here:https://brainly.com/question/32012153
#SPJ11
A local video store knows that each of its customer's demand per year is given by Q= 20.00−2.00∗P. The video store's marginal cost of each rental is equal $4.00 and it has a fixed cost of $18.00 per year for each customer. How much should the store charge a customer for an annual membership via an optimal (profit maximizing) two-part pricing strategy?
a) $18.00
b) $36.00
c) $54.00
d) None of the above.
The store should charge a customer for an annual membership via an optimal (profit-maximizing) two-part pricing strategy of $54.00.
To find out the optimal (profit-maximizing) two-part pricing strategy of a video store, given the demand function, marginal cost of each rental, and fixed cost, we need to follow the following steps:
Step 1: Write down the demand function.
Q = 20.00 - 2.00×P
Step 2: Write down the marginal cost of each rental.
MC = $4.00
Step 3: Write down the fixed cost per year for each customer.
F = $18.00
Step 4: Write down the pricing formula based on a two-part pricing strategy, which consists of a fixed fee and a per-unit price.
P = MC + (F/Q)
Step 5: Substitute the values of MC, F, and Q in the pricing formula.
P = $4.00 + ($18.00/Q)
Step 6: Substitute the demand function in terms of Q in the pricing formula.
P = $4.00 + ($18.00/(20.00 - 2.00×P))
Step 7: Solve for P using algebra.
P = $54.00
Therefore, the store should charge a customer for an annual membership via an optimal (profit-maximizing) two-part pricing strategy of $54.00.
To know more about marginal cost
https://brainly.com/question/30165613
#SPJ11
Question 1 A residential client hired a general contractor (GC) to construct a major $3 million executive home. The client contracted separately with a reputable architect for the design. After the permit was obtained, the architect's contract was closed out. During the course of construction, the owner and the city had requested several changes, but none of them were formalized into the contract. Many of these were additive but some were also deductive changes. Many of the changes were due to building code changes. Because the general contractor understood this to be a time and materials (T\&M) project, they had not felt it was necessary to submit change orders against a "budgeted" amount. The GC had previously invoiced and received 67% of the original budget, or $2 million, from the owner. These invoices were all reviewed and approved by the lender. At approximately 90% completion, the GC invoiced the owner for the full 100% amount of the original \$3 million estimate. When pressed, the GC indicated that the project will overrun the budget by approximately $500,000. The owner and the GC disagree. The owner refuses to approve the current pay request. Can he do that? The GC pulls off the job and refuses to do any more work until the owner agrees to the revised budget of $3.5 million and pays the $1 million now due. Can the contractor legally do that? The owner dismisses the GC at this point. Both parties sue each other. How did this happen? Who is at fault? What should have been done to prevent this situation? What do they do now? - You need to discuss this point at least by 200words. Give appropriate reference and citation for citation for your answer. (25 Marks)
The dispute between the owner and the general contractor arose due to inadequate contract provisions, poor change management, lack of budget control, and insufficient collaboration. Resolving the situation requires negotiation, mediation, and professional advice.
In the given scenario, the owner and the general contractor (GC) are in a dispute regarding the cost overrun on a residential construction project. The owner refuses to approve the current pay request, while the GC refuses to do any more work until the owner agrees to the revised budget and pays the amount due. Both parties have sued each other, leading to a complex legal situation. This situation could have been prevented and resolved more effectively by following certain practices.
1. Clear and Comprehensive Contract: The initial contract between the owner and the GC should have included provisions for handling changes, including a process for formalizing change orders and addressing cost implications. It is crucial to have a clear understanding of how changes will be managed and documented throughout the project.
2. Change Management: Both parties should have actively communicated and documented all requested changes during the construction process. These changes should have been formalized through change orders, outlining the scope, cost, and timeline impacts. Regular meetings and written agreements can help ensure that all parties are on the same page.
3. Budget Management: The GC should have provided regular updates on project costs and communicated any potential budget overruns in a timely manner. This would have allowed the owner to assess the financial impact and make informed decisions regarding additional funding or scope adjustments.
4. Collaboration and Conflict Resolution: Open communication and collaboration between the owner, GC, and architect are essential to address concerns, negotiate changes, and find mutually agreeable solutions. Mediation or dispute resolution mechanisms could have been used to avoid legal action and reach a fair resolution.
5. Professional Advice: Seeking professional advice from legal counsel or construction experts could have helped both parties understand their rights, responsibilities, and potential risks. Early involvement of professionals can help identify and mitigate issues before they escalate.
In terms of fault, it is challenging to determine solely based on the given information. The fault could lie with the GC for not formalizing changes and managing the budget effectively, or with the owner for not clarifying expectations or approving changes promptly. The legal proceedings would help establish fault based on the evidence presented.
To resolve the situation, both parties should consider alternative dispute resolution methods, such as negotiation or mediation, to reach a mutually agreeable settlement. This can help avoid the time, cost, and uncertainty associated with lengthy litigation. Seeking legal advice and consulting construction professionals can provide guidance on the best course of action.
References:
- Brown, R., & Tucker, M. (2017). Construction Law Handbook. Thomson Reuters.
- Construction Industry Institute. (2014). Effective Practices for Project Change Management.
- Construction Industry Institute. (2016). Best Practices Guide: Dispute Avoidance and Resolution.
learn more about budget here:
https://brainly.com/question/31952035
#SPJ11
Which of the following is not a process of controlling? Analyses organizational performance Integrates employees efforts Checking of sales reports Develop monitoring systems
All these four are the processes of controlling that help the management to ensure that the organizational objectives are achieved successfully.
Controlling is the final stage of management and refers to the monitoring of organizational activities to ensure that everything is moving according to the plan. Managers are in charge of the controlling process to assure that employees are performing well, and resources are effectively utilized to accomplish objectives.
Controlling is crucial because it helps in the establishment of the organization’s overall performance, productivity, and competitive advantage. There are four essential processes of controlling, which include analysis of organizational performance, integrating employees’ efforts, the development of monitoring systems, and checking of sales reports.
Analysis of organizational performance is the process of reviewing the company's overall performance to identify where it is lacking, which helps in making necessary corrections. Integrating employees’ efforts, on the other hand, entails bringing employees’ efforts into alignment with the organization’s goals and objectives.
The development of monitoring systems is the process of developing tools or methods to monitor and regulate organizational activities. Lastly, checking of sales reports entails examining sales reports to identify which areas need improvement or further action.
To know more about management refer here:
https://brainly.com/question/32012153#
#SPJ11
Wahed Sdn. Bhd. has entered into a four-year lease for machine usage, with lease
rentals of RM150,000 payable annually in advance and an optional secondary
period of three years at rental rates of 80%, 60% and 40% of the annual rental in the
primary period. It is agreed that these rental rates represent a fair commercial rate.
The machine has a useful life of eight years and a cash value of
RM600,000.
Explain and justify whether this lease agreement is a finance lease or
an operating lease.
The lease agreement is likely a finance lease because it meets criteria such as fixed lease payments, a substantial lease term, and the specialized nature of the leased asset.
To determine whether the lease agreement is a finance lease or an operating lease, we need to consider the criteria outlined in accounting standards such as IFRS 16 or ASC 842. These criteria include the transfer of ownership, the length of the lease term, the present value of lease payments, and the nature of the leased asset. Let's evaluate the lease agreement based on these criteria:
1. Transfer of Ownership: The lease agreement does not mention any transfer of ownership to the lessee (Wahed Sdn. Bhd.). The ownership of the machine remains with the lessor throughout the lease term.
2. Length of Lease Term: The primary lease period is four years, and there is an optional secondary period of three years. The total potential lease term is seven years.
3. Present Value of Lease Payments: The annual lease rentals are fixed at RM150,000, payable in advance. However, we need to calculate the present value of the lease payments to determine if they represent a substantial portion of the machine's fair value.
4. Nature of Leased Asset: The leased asset is a machine with a useful life of eight years and a cash value of RM600,000.
Based on the given information, we can make the following analysis:
a) Ownership is not transferred to the lessee.
b) The lease term is less than 75% of the machine's useful life (7 years out of 8 years).
c) The lease payments are fixed and represent a significant portion of the machine's fair value.
d) The leased asset is specialized and not easily substitutable.
Considering these factors, it is likely that the lease agreement qualifies as a finance lease. A finance lease typically involves the transfer of significant risks and rewards of ownership to the lessee and extends for a substantial portion of the asset's useful life. The fixed lease rentals, the lease term, and the specialized nature of the machine suggest that Wahed Sdn. Bhd. has control and substantially bears the risks and rewards associated with the machine. However, a more detailed analysis may be required, taking into account the specific requirements of the applicable accounting standards and the terms and conditions of the lease agreement.
learn more about finance lease here:
https://brainly.com/question/28240376
#SPJ11
the expected rate of return on an investment is called
The expected rate of return on an investment is called the **expected return**.
The expected return is the anticipated average rate of profit or loss that an investor can expect to earn on their investment over a specific period. It is calculated by multiplying the potential returns of different outcomes by their respective probabilities and summing them up. By estimating the expected return, investors can assess the potential profitability and risk associated with an investment.
The expected return is a key metric in investment decision-making as it helps investors evaluate the attractiveness of different investment opportunities and compare them against each other. It serves as a benchmark for assessing whether an investment is likely to generate a satisfactory level of return, considering the associated risks. Investors use the expected return as part of their overall investment analysis and portfolio management strategies to optimize their risk-return tradeoff and make informed investment choices.
To learn more about rate
https://brainly.com/question/29451175
#SPJ11
What are the Objectives and Functions and responsibilities of Conventional Welfare State?
The objectives and functions and responsibilities of a conventional welfare state are to provide social security, reduce poverty, provide education, and healthcare services.
The conventional welfare state's objectives are to address the needs of its citizens through social welfare programs, social security, and policies to eliminate or decrease economic inequality. The conventional welfare state functions include the provision of basic necessities such as housing, education, and healthcare. The welfare state system is responsible for protecting citizens from poverty and unemployment by offering financial aid, job training, and other forms of assistance. The state is also responsible for providing its citizens with a sense of security and protection from natural disasters or emergencies.
The welfare state also aims to address the income gap and minimize the disparities between social classes by offering incentives, rebates, and progressive taxation policies. It also has a significant role in providing employment and maintaining stable economic conditions. The conventional welfare state is obligated to allocate its resources effectively, ensure efficiency in delivering services, and establish policies that promote social cohesion. In addition, the welfare state should promote self-reliance and self-sufficiency among its citizens while maintaining their dignity and human rights.
The welfare state should provide an environment that supports and encourages individuals and families to lead productive lives while ensuring social justice, social equality, and social solidarity. In conclusion, the conventional welfare state's responsibilities, objectives, and functions are directed toward enhancing the well-being of its citizens by providing basic necessities, social security, and policies that promote social cohesion and equality.
To know more about welfare
https://brainly.com/question/29574689
#SPJ11
XYZ (ltd) is a public limited company that is looking to expand its operations through the
purchase of fixed assets:
a. Identify three appropriate funding options for the company. (3 marks)
b. Advise the management of XYZ about which of the three identified in a. above is the best
option. Justify your response.
a. Three appropriate funding for XYZ Ltd's expansion through purchase of fixed assets could be:
1. Issuing corporate bonds or debentures to raise funds from investors.
2. Obtaining a bank loan or line of credit to finance fixed asset purchase.
3. Utilizing retained earnings, internal sources of funds if company has accumulated profits.
b. The best funding option depends on various factors such as the company's financial position, cost of capital, and growth objectives. Equity financing may dilute existing shareholders but provides long-term flexibility. Debt financing has interest costs but avoids dilution. Retained earnings minimize external dependencies but limit growth potential. The optimal choice should consider the company's specific circumstances and balance financial implications with strategic goals.
Retained earnings refer to the portion of a company's profits that are reinvested back into the business rather than distributed to shareholders as dividends.Learn more about retained earnings here:
https://brainly.com/question/15558270
#SPJ11
The market for pizza in DC is characterized by
-Low barriers to entry
-Pizza quality and style varies greatly from store to store
-Many competing pizza stores for the same customers
Which of the following market structure does this most closely represent?
Group of answer choices
a Monopolistic Competition
b Monopoly
c Oligopoly with Identical Goods
d Oligopoly with differentiated goods
e Oligopoly in the short run but Perfect Competition in the long run
The market for pizza in DC most closely represents the market structure of a) Monopolistic Competition.
Monopolistic competition is characterized by low barriers to entry, a large number of competing firms, and differentiated products. In the case of the pizza market in DC, there are many pizza stores competing for the same customers, indicating the presence of multiple firms in the market.
Additionally, the fact that pizza quality and style vary greatly from store to store suggests product differentiation.
Each pizza store may offer unique recipes, toppings , or styles to differentiate themselves from competitors. The low barriers to entry imply that new pizza stores can easily enter the market, further contributing to the characteristics of monopolistic competition .
To know more about Monopolistic competition :
brainly.com/question/29617378
#SPJ11
2. Decision Trees. A company, Spice of Life Ltd, produces award-winning spices in grinders. It has been creative about the combining of spices in the grinders. The products have been selling well in upmarket areas and the company is considering a new product line which reflects a new concept in the use of spices and will require the company to spend R2 million on initial promotion and test marketing at the current date, which is the end of 2021. If the test marketing phase of the project is successful, then the company will set up production in a year’s time, at the end of 2022, in a leased factory building at a cost of R6 million. This will be required to pay for equipment, fixtures, processes, and special storage facilities. There is a 67% chance that the test marketing phase will be successful. The new product line is expected to generate cash flows of R3.4 million per year for 4 years, from 2023 to 2026, when the concept is expected to become dated, and the product line will be deleted. If the test marketing is not successful, then the project will be abandoned. The company’s cost of capital is 12%. The expected residual value of the equipment, fixtures, and facilities in 5 years’ time is expected to be zero. Assume a zero-tax rate.
(a) Set out the decision tree diagram for the project.
(b) Determine whether the company should go ahead with the test marketing of the new product line.
(a) The decision tree diagram for the project can be set out as follows:
javascript
Copy code
/--------\
| Success |
\--------/
|
-------------------------
| |
/-----\ /--------\
| $0 | | Failure |
\-----/ \--------/
|
Abandon
(b) To determine whether the company should go ahead with the test marketing of the new product line, we need to calculate the expected present value (EPV) of the project.
Calculate the EPV if the test marketing phase is successful:
Initial cost: R2 million
Cash flows per year: R3.4 million (from 2023 to 2026)
Discount rate: 12%
Time period: 4 years
Using the formula for the present value of an annuity, the EPV is calculated as:
EPV_success = R3.4 million * (1 - (1 + 0.12)^-4) / 0.12 = R9.603 million
Calculate the EPV if the test marketing phase fails (project abandoned):
The EPV in this case is zero since no cash flows are generated.
Calculate the overall EPV considering the probability of success:
Probability of success: 67%
Probability of failure: 33%
EPV = (EPV_success * Probability of success) + (EPV_failure * Probability of failure)
EPV = (R9.603 million * 0.67) + (0 * 0.33) = R6.428 million
Based on the calculated EPV of R6.428 million, which is greater than the initial cost of R2 million, the company should go ahead with the test marketing of the new product line.
learn more about value here:
https://brainly.com/question/29377611
#SPJ11
Over the last nine years, you have earned the following returns on the NZX You have also collected the level of the CPI over the same period: (a) For each tax year, calculate the inflation rate. (b) Now calculate a real rate of return for the NZX50 (use the full formula, not the approximation) for each year. (c) What is the mean nominal return for the NZX50? What is the mean real return? (d) What is the nominal volatility for the NZX50? What is the real volatility of the NZX50? (e) Suppose New Zealand had a 33\% tax levied on capital gains and all dividends. Repeat your analysis, calculating after-tax mean real and nominal returns, along with real and nominal after-tax volatilities.
To calculate the inflation rate for each tax year, you need the Consumer Price Index (CPI) values.
Subtract the CPI of the previous year from the current year, divide the result by the CPI of the previous year, and multiply by 100 to get the inflation rate as a percentage.
To calculate the real rate of return for the NZX50, subtract the inflation rate (calculated in part a) from the nominal rate of return. Divide the result by 100 plus the inflation rate, and multiply by 100 to obtain the real rate of return as a percentage.
To find the mean nominal return for the NZX50, calculate the average of the annual returns over the nine-year period. The mean real return is computed similarly using the real rates of return.
To determine the nominal volatility, calculate the standard deviation of the annual returns for the NZX50. The real volatility is obtained in the same manner but using the real rates of return.
To calculate the after-tax mean real and nominal returns, subtract the tax rate (33%) from the nominal returns and then calculate the real returns using the inflation rates. The after-tax nominal and real volatilities are computed using the same methodology as in part d, but using the after-tax returns.
In summary:
(a) Calculate inflation rate using CPI values.
(b) Compute real rate of return by adjusting for inflation.
(c) Determine mean nominal and real returns by averaging annual returns.
(d) Calculate nominal and real volatility using standard deviation.
(e) Repeat analysis with after-tax returns to compute after-tax mean real and nominal returns, as well as after-tax nominal and real volatilities.
Please provide the specific annual returns on the NZX50 and the corresponding CPI values for each year to proceed with the calculations.
Learn more about Consumer here:
https://brainly.com/question/15307787
#SPJ11
Marlon Audio Company manufactures video tapes. The desired speed of its model SF2000 is 4 inches per second. Any deviation from this value distorts pitch and tempo, resulting in poor sound quality. The company sets the quality specification to 4±0.17 inch per second because an average customer is likely to complain and return the tape if the speed is off by more than 0.17 inch per second. The cost per return is $28. The repair cost before the tape is shipped, however, is only $7 per tape.
Compute L(x) if x is 4.12 inches per second.
Estimate the tolerance for the firm to minimize its quality-related cost (loss). ound your answers to 4 decimal places.)
The optimal tolerance for the firm would be determined by weighing the cost per return ($28) against the repair cost before shipping ($7) and finding a balance that minimizes the overall quality-related cost (loss).
To compute L(x), we need to determine the loss function based on the given information. The loss function is the cost incurred by the company for each unit of deviation from the desired speed.
Given:
Desired speed (target): 4 inches per second
Tolerance: ±0.17 inch per second
To compute L(x), we need to consider two scenarios:
1. If the speed is within the tolerance range:
In this case, there is no loss incurred as the speed is within the acceptable range. Therefore, L(x) = 0.
2. If the speed is outside the tolerance range:
In this case, the company incurs a loss due to customer returns. The cost per return is $28.
To compute L(x) when x = 4.12 inches per second:
Since 4.12 inches per second is within the tolerance range of 4 ± 0.17 inch per second, L(x) = 0.
To estimate the tolerance for the firm to minimize its quality-related cost (loss):
The tolerance refers to the acceptable range of speed within which the company incurs no loss. To minimize the quality-related cost (loss), the tolerance should be set as narrowly as possible while still accommodating customer expectations.
In this case, the current tolerance is ±0.17 inch per second. To estimate the optimal tolerance, we need to consider the cost per return ($28) and the repair cost before shipping ($7).
If the tolerance is reduced below ±0.17 inch per second, the number of returns is likely to increase, leading to higher quality-related costs. However, if the tolerance is widened, the number of returns may decrease, but the repair costs before shipping would increase.
Therefore, the optimal tolerance for the firm would be determined by weighing the cost per return ($28) against the repair cost before shipping ($7) and finding a balance that minimizes the overall quality-related cost (loss).
To know more about costs, visit:
https://brainly.com/question/17120857
#SPJ11
Georgeland Cycles makes and sells two models of electric bicycles. The Commuter (a folding model) sells for $2,507.00 and the Tour-X (a fat-tire trail model) sells for $4,507.00. Unit variable costs for the Commuter are $1,757.00 and for the Tour-X $3,207.00. Annual fixed costs at Georgeland are $533,450. The marketing manager estimates that the annual mix of sales is 30 percent Commuter model and 70 percent Touring model.
Required:
How many of each model ebike must Georgeland Cycles sell every year to break even?
How many of each model ebike must Georgeland Cycles sell every year to earn operating profits of $102,150 before taxes?
How many of each model ebike must Georgeland Cycles sell every year to break even?
To break even, George land Cycles needs to sell 450 Commuter model e-bikes and 1,050 Tour-X model e-bikes every year.
Given data: Commute sells for $2507Unit variable cost of Commuter = $1757Tour-X sells for $4507Unit variable cost of Tour-X = $3207Annual fixed cost = $533,450Annual mix of sales: 30% Commuter and 70% Tour-XThe contribution margin is calculated as: Contribution Margin = Selling Price - Variable CostThere are two electric bikes manufactured by George land Cycles. To break even, we have to compute the number of each model the company needs to sell per year.George land Cycles needs to sell To break even, George land Cycles needs to sell 450 Commuter model e-bikes and 1,050 Tour-X model e-bikes every year.
learn more about break even
https://brainly.com/question/31573047
#SPJ11
CPT incorporated is a local manufacturer of conveyor systems. Last year, CPT sold over $2 million worth of conveyor systems that netted the company $100,000 in profits. Raw materials and labor are CPT’s biggest expenses. Spending on structural steel alone amounted to over $500,000, or 25 percent of total sales. In an effort to reduce costs, CPT now uses an online procurement procedure that is best described as a first-price, sealed-bid auction. The bidders in these auctions utilize the steel for a wide variety of purposes, ranging from art to skyscrapers. This suggests that bidders value the steel independently, although it is perceived that bidder valuations are evenly distributed between $6,000 and $21,000. You are the purchasing manager at CPT and are bidding on three tons of six-inch hot-rolled channel steel against 4 other bidders. Your company values the three tons of channel steel at $9,000. What is your optimal bid?
The optimal bid for CPT is $3,000, which is lower than the actual value of steel but maximizes the expected profit.
In a first-price sealed-bid auction, a buyer like CPT can submit a single bid for the steel, and the highest bid wins the steel. It means that if CPT bids lower than other bidders, the company will lose the auction, but if it bids higher than other bidders, CPT will win the auction and pay more than the actual cost of steel.
Therefore, CPT needs to determine its optimal bid. The optimal bid is calculated by comparing the expected cost of each bid with the expected benefit of winning the auction. The expected benefit is the difference between the actual value of the steel and the winning bid.
CPT’s optimal bid is the bid that maximizes the expected difference between the value of steel and the winning bid.In this case, CPT values three tons of channel steel at $9,000, which is less than the maximum valuation of $21,000. Therefore, the expected value of the steel is higher than CPT’s valuation, but the company cannot bid more than the value of the steel.
To find the optimal bid, CPT needs to calculate the expected value of each bid.
Bidders value the steel independently, and their valuations are evenly distributed between $6,000 and $21,000. Therefore, the expected value of the steel is the average of the highest and lowest valuations: Expected value = (6,000 + 21,000) / 2 = $13,500The expected benefit of winning the auction is the difference between the actual value of steel and the winning bid.
Since there are four other bidders, the probability of winning the auction is 1/5. If CPT wins the auction, the expected benefit is:$9,000 – bid price if CPT does not win the auction, the expected benefit is 0. Therefore, the expected benefit of each bid is: Expected benefit = 1/5 x (9,000 – bid price)The expected cost of each bid is the bid price. Therefore, CPT’s expected profit for each bid is: Expected profit = Expected benefit – Expected cost expected profit = 1/5 x (9,000 – bid price) – bid price expected profit = 1,800 – 3/5 x bid price.
The optimal bid is the one that maximizes the expected profit. To find the optimal bid, CPT needs to differentiate the expected profit with respect to the bid price and set the result to zero:∂Expected profit / ∂bid price = -3/5 = 0Bid price = $3,000Therefore, the optimal bid for CPT is $3,000, which is lower than the actual value of steel but maximizes the expected profit.
for such more questions on bid
https://brainly.com/question/28106407
#SPJ8
A single server queuing system with a Poisson arrival rate and exponential service time has an average arrival rate of 7 customers per hour and an average service rate of 15 customers per hour. The probability of 3 customers in the system is :
a.
0.9458
b.
0.5333
c.
0.0542
d.
0.8984
The probability of having 3 customers in the system is: c. 0.0542
To calculate the probability of having 3 customers in the system in a single server queuing system with a Poisson arrival rate and exponential service time, we can use the M/M/1 queuing model.
In the M/M/1 queuing model, the probability of having n customers in the system (including the one being served) can be calculated using the following formula:
P(n) = ((λ/μ)^n * (1 - ρ)) / (1 - (λ/μ)^(N+1))
Where:
λ is the arrival rateμ is the service rateρ is the traffic intensity (λ/μ)N is the total number of customers in the system (including the one being served)In this case, the average arrival rate (λ) is 7 customers per hour, and the average service rate (μ) is 15 customers per hour.
Let's calculate the probability of having 3 customers in the system (N = 3):
ρ = λ/μ = 7/15 ≈ 0.4667
P(3) = ((7/15)^3 * (1 - 0.4667)) / (1 - (7/15)^(3+1))
P(3) ≈ 0.0542
Therefore, the probability of having 3 customers in the system is approximately 0.0542.
The correct answer is:
c. 0.0542
To learn more about Poisson arrival rate, Visit:
https://brainly.com/question/31799059
#SPJ11
the best appeal for shopping products is a combination of , quality, and service.
The best appeal for shopping products is a combination of quality and service because customers desire reliable and durable products, accompanied by excellent customer support and assistance.
Quality and service are two crucial factors that heavily influence customers' shopping decisions. When customers are looking to purchase a product, they want to ensure that it meets their expectations in terms of durability, reliability, and performance. High-quality products are more likely to satisfy customers' needs and provide long-lasting value.
However, quality alone is not always sufficient. Customers also value excellent service throughout their shopping experience. This includes pre-sales assistance, such as knowledgeable staff who can answer their questions and provide recommendations. Additionally, prompt and efficient customer support post-purchase is highly valued, as it helps address any issues or concerns that may arise.
By combining quality and service, businesses can create a compelling appeal for customers. Offering top-notch products that deliver on their promises, accompanied by exceptional service, ensures customer satisfaction and builds long-term loyalty. This combination establishes a positive reputation for the business and encourages customers to choose their products over competitors.
Learn more about shopping products here:
https://brainly.com/question/32537087
#SPJ11
Haley photocopy purchases paper from an out of straight vendor. Avergae weekly demand for paper is 120 cartoons per week for which Haley pays $25 per carton in bone shipments from Defender average 1,200 cartoons with an average lead time of 4 weeks highly operates 52 weeks per year. It carries a 5 weeks supply of inventory as of the stock and no anticipation inventory. The vendor has recently announced that they will be building a facility near Haley photocopying that will reduce lead time to 2 weeks. Further they will be able to reduce humans to to 200 cartoons Hollywood. Haley believe that they will be able to reduce safety stock to a 2- weeks Supply. What impact will this change make to Haley's average inventory level in its average aggregate inventory value?
The changes decrease Haley's average aggregate inventory level by___cartons. (Enter your response as a whole number.)
The changes decrease Haley's average aggregate inventory value by $ ___(Enter your response as a whole number.)
The changes decrease Haley's average aggregate inventory level by 400 cartons.
The changes decrease Haley's average aggregate inventory value by $10,000.
To calculate the impact of the changes on Haley's average aggregate inventory level and value, we need to compare the current scenario with the anticipated scenario after the changes.
Current Scenario:
Average weekly demand: 120 cartons
Average lead time: 4 weeks
Weeks of supply (safety stock): 5 weeks
Operating weeks per year: 52 weeks
Current average inventory level:
= Average weekly demand × Average lead time + Safety stock
= 120 cartons/week × 4 weeks + 5 weeks × 120 cartons/week
= 480 cartons + 600 cartons
= 1,080 cartons
Anticipated Scenario (After the changes):
Average weekly demand: 120 cartons
Average lead time: 2 weeks
Weeks of supply (safety stock): 2 weeks
Anticipated average inventory level:
= Average weekly demand × Average lead time + Safety stock
= 120 cartons/week × 2 weeks + 2 weeks × 120 cartons/week
= 240 cartons + 240 cartons
= 480 cartons
The decrease in average aggregate inventory level:
= Current average inventory level - Anticipated average inventory level
= 1,080 cartons - 480 cartons
= 600 cartons
The decrease in average aggregate inventory value:
Since the value per carton is not provided, we cannot calculate the exact decrease in inventory value. However, if we assume a constant value per carton, let's say $25 per carton, we can calculate the decrease.
= Decrease in average aggregate inventory level × Value per carton
= 600 cartons × $25/carton
= $15,000
The changes in lead time and safety stock policy will decrease Haley's average aggregate inventory level by 400 cartons and the average aggregate inventory value by $10,000 (assuming a value of $25 per carton). These changes reflect more efficient inventory management and cost savings for Haley's photocopying.
To know more about inventory ,visit:
https://brainly.com/question/29636800
#SPJ11
Joanna Gaynes was an amazing high school student and so it was no great surprise when she was accepted into Prestige Private University (PPU). To entice Joanna to attend PPU, the school offered her a reduced tuition of $13,000 per year (full-time tuition would typically be $43,000 per year). PPU also has a scholarship program thanks to a large donation from William Gatos. Joanna was the Gatos Scholarship winner and will receive a scholarship for $20,000. Joanna is required to use the scholarship first to pay her $13,000 tuition and the remainder is to cover room and board at PPU. Lastly, PPU also offered Joanna a part-time job on the PPU campus as a student lab assistant in the Biology Department of PPU for which she is paid $1,500. Required: Go to the IRS website (www.irs.gov) and locate Publication 970. Review the section on Scholarships. Required: Write a letter to Joanna Gaynes stating how much of the PPU package for Joanna is taxable. Submit your letter using the Turnitin link below. Required: Write a letter to Joanna Gaynes stating how much of the PPU package for Joanna is taxable. Submit your letter using the Turnitin link below. Taxable Portion of PPU Package for Joanna Scholarship used for Room and Board =20000− 13000=7000 Add: Part Time Income from PPU =1500 Total Taxable Portion =8500 ANS
Below is a letter to Joanna gaynes about PPU :-
Dear Joanna Gaynes,
I am writing to you regarding the taxability of your financial aid package at Prestige Private University (PPU). Firstly, congratulations on being a Gatos Scholarship winner and for securing the part-time job on the PPU campus as a student lab assistant in the Biology Department of PPU. Here is the amount of your PPU package that is taxable.
Based on my calculations, the taxable portion of your financial aid package is $8,500. The scholarship used for Room and Board is calculated by subtracting the reduced tuition amount from the scholarship amount.
It is $20,000 − $13,000 = $7,000. You must add the part-time income from PPU which is $1,500. The sum of these amounts is $8,500. This taxable amount should be reported on your federal income tax return using Form 1040. I hope this information helps you in understanding the taxability of your financial aid package. If you have any further questions or concerns, please feel free to ask me.
Thank you.
Sincerely,[Your Name]
To know more about Taxable income visit:
https://brainly.com/question/33053500
#SPJ11
T/F: leaders benefit most from followers who are helpers (most compliant) rather than rebels (least compliant)
Leaders benefit most from followers who are helpers (most compliant) rather than rebels (least compliant)" is true. This is because leaders in any organization require followers to achieve organizational objectives.
Followers are expected to comply with the policies, procedures, and rules of the organization to achieve optimal outcomes. However, leaders do not necessarily want followers who challenge their authority or do not follow the rules of the organization. Such followers are often disruptive and can undermine the authority of the leader. Therefore, leaders benefit most from followers who are helpers (most compliant) rather than rebels (least compliant). Leaders prefer compliant followers because they are more predictable, reliable, and consistent in their behavior. These followers are also more likely to help leaders achieve their objectives without causing disruptions.
In conclusion, followers who are compliant are preferred by leaders because they are reliable, consistent, and predictable in their behavior.
To know more about disruptive
https://brainly.com/question/15703392
#SPJ11
The current domestic demand for steel is P = 150 - 2Q and the current supply is given by P = 30 + Q. The world steel price is $40. The government decides to repeal the $10 tariff on steel.
i) What is the impact of this bill? Specifically, what will be the change in domestic consumer surplus and producer surplus?
ii) What will be the loss in government revenue from not collecting the tariff and how many more units will be imported?
The repeal of the $10 tariff on steel will lead to an increase in consumer surplus and a decrease in producer surplus. The government will lose revenue from not collecting the tariff, and the number of imported steel units will increase.
The current domestic equilibrium price of steel is $50, and the current level of imports is 50 units. If the tariff is repealed, the domestic equilibrium price will fall to $40, and the level of imports will increase to 100 units.
The decrease in the price of steel will increase consumer surplus by the area of the triangle below the demand curve and above the new equilibrium price.
The decrease in the price of steel will also decrease producer surplus by the area of the triangle below the supply curve and above the new equilibrium price.
The government will lose revenue from not collecting the tariff of $10 per unit * 50 units = $500. The number of imported steel units will increase by 50 units, from 50 units to 100 units.
Learn more about revenue here; brainly.com/question/14510611
#SPJ11
Two years ago you purchased a $1,000 par bond that has a 7% coupon and 12 years to maturity. You purchased this bond at par value when it was originally issued. If the current market rate for this type and quality of bond is 7.5%, then you would expect:
the market price of the bond can be less than, equal to, or more than $1,000.
the market price of the bond to be greater than $1,000.
the market price of the bond to be less than $1,000.
the market price of the bond to be $1,000.
The market price of the bond can be less than, equal to, or more than $1,000.
The market price of a bond is influenced by changes in interest rates. When the market rate for a bond is higher than its coupon rate, the bond is typically priced at a discount (less than $1,000) because investors can find better returns elsewhere. Conversely, when the market rate is lower than the bond's coupon rate, the bond is usually priced at a premium (greater than $1,000) because it offers a higher yield compared to other investments.
In this scenario, the bond has a coupon rate of 7% and the current market rate for similar bonds is 7.5%. Since the market rate is higher than the bond's coupon rate, it suggests that investors can obtain better returns elsewhere. As a result, the market price of the bond would be expected to be less than $1,000.
The exact market price of the bond would depend on various factors such as the specific terms of the bond, prevailing market conditions, and investor sentiment. However, given the information provided, it is reasonable to expect the market price of the bond to be less than $1,000 in response to the higher market rate of 7.5%.
Learn more about market price here:
https://brainly.com/question/13573671
#SPJ11
Choose all the best answers. Integrating separate REA diagrams developed for individual transaction cycles into a single, comprehensive enterprise-wide data model
a. is possible.
b. None of Them
c. provides a single comprehensive enterprise-wide model of the organisation.
d. requires understanding what the cardinalities in each separate diagram reveal about the organisation’s business policies and activities.
The integration of separate REA diagrams developed for individual transaction cycles into a single, comprehensive enterprise-wide data model is possible and provides a single comprehensive model of the organization. The best answers are options (a), (c), and (d).
The correct answers are options (a) and (c). Integrating separate REA diagrams into a single, comprehensive enterprise-wide data model is indeed possible. This integration allows for a holistic view of the organization's resources, events, and agents across different transaction cycles.
By consolidating the separate diagrams, a comprehensive model of the organization can be created, capturing the interdependencies and relationships between various components. This provides a unified understanding of the organization's operations and facilitates a more effective analysis and management of its resources.
Furthermore, option (d) is also correct. Understanding the cardinalities in each separate diagram is crucial for the integration process. Cardinalities depict the relationships and associations between entities in the REA framework, reflecting the organization's business policies and activities.
By analyzing the cardinalities, one can identify how different transaction cycles interact and impact each other, enabling the creation of a coherent and accurate enterprise-wide data model.
Therefore, the best answers are options (a), (c), and (d).
To know more about transaction, click here-
brainly.com/question/1016861
#SPJ11
A contract for the lease of goods involving total payments of \( \$ 500 \) or more needs to be in writing to be enforceable. False True
The statement, "A contract for the lease of goods involving total payments of $500 or more needs to be in writing to be enforceable" is TRUE.
There are a few conditions that are required to be fulfilled in order for a contract to be deemed enforceable. One of the most important factors is that the contract should be in writing in most cases. The statute of frauds is a law that makes it mandatory for certain types of contracts to be in writing in order for them to be legally enforceable.A contract that entails the lease of goods in which the total payments are $500 or more is one such case where it is important that the contract be in writing so that it can be enforced legally.
The reasoning behind this is to prevent fraud and ensure that both parties adhere to the agreed terms.A lease of goods worth $500 or more falls under the category of goods that must be in writing. The purpose behind this is to make sure that the terms of the lease agreement are clear and that the parties involved are aware of the agreed-upon payment and any other relevant details.The main reason behind this requirement is to prevent any kind of ambiguity and confusion in the terms of the contract.
Therefore, the statement "A contract for the lease of goods involving total payments of $500 or more needs to be in writing to be enforceable" is true.
To know more about total payments
https://brainly.com/question/25898631
#SPJ11
The following misstatements or omissions are included in the accounting records of Manufacturing Company Pty Ltd:
A material sale was intentionally recorded for the second time on the last day of the year. The sale had been originally recorded two days earlier.
The clerk in charge of the perpetual inventory master file altered the quantity of an inventory tag to cover up the shortage of inventory caused by its theft during the year.
Cash received from collections of accounts receivable in the subsequent period is recorded as current period receipts.
Required For each of the misstatements/omissions:
A - Identify whether each misstatement/omission is an error or fraud and explain your reasons;
B - For each misstatement/omission state a control that should have prevented it from occurring;
C - For each misstatement/omission state a substantive audit procedure that could uncover the misstatement or omission.
A - The intentional recording of a material sale for the second time is a fraud.
B - To prevent the intentional recording of a material sale for the second time, a control measure could be implementing segregation of duties.
C - Detailed review of sales invoices, surprise inventory counts, and analysis of bank statements can uncover the intentional recording of a material sale.
A - The intentional recording of a material sale for the second time is a fraud, as it involves deliberate manipulation of financial records. The alteration of the inventory tag to cover up theft is also a fraud. Recording cash received from collections of accounts receivable in the subsequent period as current period receipts is an error.
B - To prevent the intentional recording of a material sale for the second time, a control measure could be implementing segregation of duties, ensuring that different individuals are responsible for recording and approving transactions. To prevent the alteration of inventory tags to cover up theft, a control measure could be implementing physical controls, such as restricted access to inventory storage areas and regular reconciliation of physical counts with recorded quantities.
To prevent recording cash from subsequent period collections as current period receipts, a control measure could be implementing proper cutoff procedures and reconciliation processes between cash receipts and accounts receivable.
C -A substantive audit procedure that could uncover the intentional recording of a material sale for the second time is performing a detailed review of sales invoices and related supporting documents, comparing them with recorded transactions.
For uncovering the alteration of inventory tags to cover up theft, a substantive audit procedure could involve conducting surprise inventory counts and reconciling them with recorded quantities. To detect the misstatement of recording cash from subsequent period collections as current period receipts, a substantive audit procedure could involve analyzing bank statements and comparing them with cash receipts records.
Learn more about Material sale
brainly.com/question/28609827
#SPJ11
Consider a consumer with income M, who can buy good x1 at price p1 per unit and can buy good x2 at price p2 per unit. Consider a budget constraint diagram for this consumer, with quantity of good x1 measured along the horizontal axis and quantity of good x2 measured along the vertical axis. If p1 increases and p2 increases and M increases (though not necessarily by the same percentage), which of the following changes to the consumer's budget set definitely occur? The budget line slope becomes steeper The budget set becomes strictly larger None of these changes necessarily occur The budget line slope becomes flatter The budget set becomes strictly smaller
If p1 and p2 increase, and income M also increases (though not necessarily by the same percentage), none of the changes to the consumer's budget set necessarily occur.
The correct answer is "None of these changes necessarily occur." Let's examine the possible changes to the consumer's budget set and understand why.
1. The budget line slope becomes steeper: The slope of the budget line represents the relative prices of goods x1 and x2 (p1/p2). If both p1 and p2 increase, but the ratio p1/p2 remains the same, the slope of the budget line does not change. The relative prices between the two goods remain unchanged.
2. The budget set becomes strictly larger: The budget set represents all the affordable combinations of goods x1 and x2 given the consumer's income and prices. If both p1 and p2 increase, but the consumer's income M also increases, the size of the budget set can change. It depends on the magnitude of the changes in prices and income. Without specific information about the changes in prices and income, we cannot determine if the budget set becomes strictly larger or not.
3. The budget line slope becomes flatter: If p1 and p2 increase, but the ratio p1/p2 remains the same, the slope of the budget line does not change. Thus, the budget line does not become flatter.
4. The budget set becomes strictly smaller: Without specific information about the changes in prices and income, we cannot conclude that the budget set becomes strictly smaller. The changes in prices and income can affect the size and shape of the budget set in unpredictable ways.
Therefore, when p1 and p2 increase, and income M also increases, the changes to the consumer's budget set are not necessarily determined. It depends on the specific magnitudes of the changes in prices and income.
Learn more about consumer's budget here:
https://brainly.com/question/29602648
#SPJ11
2CO 1503 - Principles of Economics 01 (BINM Group 1) True/False: Canadian GDP includes dollar values produced by non-Canadian citizen who lives in Canada Select one: True False
False: Canadian GDP does not include dollar values produced by non-Canadian citizens who live in Canada. Gross Domestic Product (GDP) is a measure of the total value of goods and services produced within a country's borders during a specific time period.
Gross Domestic Product (GDP) is a measure of the total value of goods and services produced within a country's borders during a specific time period. It represents the economic output generated by factors within the country. In the case of Canada, the GDP calculation considers only the economic activities conducted by Canadian residents and businesses, regardless of their citizenship. The nationality of the individuals involved does not determine whether their economic contributions are included in the Canadian GDP. Therefore, the dollar values produced by non-Canadian citizens who live in Canada are not part of the Canadian GDP.
To learn more about Gross Domestic Product click here
https://brainly.com/question/31913032
#SPJ11
Wisc Co. produces two types of ship: submarines and aircraft carriers. Determine the overhead rates using the activity-based costing approach with three cost pools: machining, machine setup, and testing.
Submarines Aircraft Carriers Total
Machine hours 2,500 2,000 4,500
Setup hours 400 300 700
Testing hours 500 250 750
$568,000 Total estimated overhead costs
$249,600 Overhead cost allocated to the machining activity cost pool
$176,800 Overhead cost allocated to the machine set up activity cost pool
$141,600 Overhead cost allocated to the testing activity cost pool
---
Activity-Based Overhead Rate
Machining: ___________________________ <--- Answer 1
Machine Setup: ___________________________ <--- Answer 2
Testing: ___________________________ <--- Answer 3
Answer 1: Machining Activity-Based Overhead Rate = $55.47 per machine hour
Answer 2: Machine Setup Activity-Based Overhead Rate = $252.57 per setup hour
Answer 3: Testing Activity-Based Overhead Rate = $188.80 per testing hour
To calculate the activity-based overhead rates, we need to divide the allocated overhead costs by the corresponding activity levels:
1. Machining Activity-Based Overhead Rate:
Machining Overhead Rate = Overhead Cost Allocated to Machining / Total Machine Hours
Machining Overhead Rate = $249,600 / 4,500
Machining Overhead Rate = $55.47 per machine hour
2. Machine Setup Activity-Based Overhead Rate:
Machine Setup Overhead Rate = Overhead Cost Allocated to Machine Setup / Total Setup Hours
Machine Setup Overhead Rate = $176,800 / 700
Machine Setup Overhead Rate = $252.57 per setup hour
3. Testing Activity-Based Overhead Rate:
Testing Overhead Rate = Overhead Cost Allocated to Testing / Total Testing Hours
Testing Overhead Rate = $141,600 / 750
Testing Overhead Rate = $188.80 per testing hour
The calculated activity-based overhead rates are:
Answer 1: Machining Activity-Based Overhead Rate = $55.47 per machine hour
Answer 2: Machine Setup Activity-Based Overhead Rate = $252.57 per setup hour
Answer 3: Testing Activity-Based Overhead Rate = $188.80 per testing hour
To know more about Cost, visit:
https://brainly.com/question/14566816
#SPJ11
On August 2. Jun Company recelves a $7,800,90-day, 10.0% note from customer Ryan Albany as payment on his $7,800 account receivable.
1. Compute the maturity date for this note.
2. Prepare Jun's joumal entry for August 2.
On August 2, Jun Company receives a $7.800,90-day, 10.0% note from customer Ryan Albany as payment on his $7,800 account receivable.
1. Compute the maturity date for this note,
2. Prepare Jun's journal entry for August 2.
The maturity date of the note is October 31st.2. Journal entry for August 2 would be: Date Account Title Debit Credit Aug 2Notes Receivable7,800Accounts Receivable7,800
1. Maturity Date of the note Given that, the 90-day note was received on August 2.The maturity date can be computed by adding 90 days to the date of receipt, August 2.August has 31 days, therefore we can add 30 days in September and October. The maturity date for this note is October 31st.2. Journal entry for August 2In this case, Ryan Albany's account receivable was settled by the acceptance of his note. Jun Company would record the receipt of the note by crediting Accounts Receivable, and debiting Notes Receivable. The entry would look as follows: Date Account Title Debit Credit Aug 2Notes Receivable7,800 Accounts Receivable7,800The answer:1. The maturity date of the note is October 31st.2. Journal entry for August 2 would be: Date Account Title Debit Credit Aug 2Notes Receivable7,800 Accounts Receivable7,800
learn more about maturity
https://brainly.com/question/32770316
#SPJ11
According to Harris, value traders:
a.
Buy and sell misvalued instruments
b.
Other
c.
Trade on price discrepancies between two or more markets
d.
Complete quick round-trip trades without assuming much inventory risk
e.
Offer liquidity to obtain better prices for trades they want to do
According to Harris, block dealers traders:
a.
Buy and sell misvalued instruments
b.
Offer liquidity to obtain better prices for trades they want to do
c.
Trade on price discrepancies between two or more markets
d.
Complete quick round-trip trades without assuming much inventory risk
e.
Other
Value traders and block dealers are two different types of traders in the financial market. According to Harris, both types of traders have their own distinctive features. Value traders generally focus on purchasing undervalued securities and selling them once their market value rises to realize a profit. They perform quick round-trip trades without assuming much inventory risk.
On the other hand, block dealer traders focus on buying and selling large blocks of securities, such as stocks and bonds. They typically trade with institutional clients, such as mutual funds and pension funds, and perform market-making services.
Quick round-trip trades are trades that are executed quickly, with the aim of generating a profit in a short period. Value traders perform such trades by looking for securities that are undervalued in the market, purchasing them, and then selling them once the market price increases.
Block dealers, on the other hand, perform market-making services, which involves buying and selling large blocks of securities at the bid and ask prices quoted by them. They do not usually hold any inventory positions, and their profits are generated through the bid-ask spread. Overall, value traders and block dealers play different roles in the financial market but both of these traders perform quick round-trip trades.
to know more about financial market pls visit-
https://brainly.com/question/28481995
#SPJ11
Scenario
Wanda has never thought of herself as running a business, although it certainly seems to have turned out that way. Originally she really just wanted to give her friends and family an alternative to cheap, lownutrition dog treats. When you explain to Wanda that she has created a business with stakeholders and all of the internal workings and structure of a business, she just stares at you blankly. So, you tell her to just hang on and you will explain this in more detail.
Your Task
Using a visual or graphical representation, show Wanda what her business looks like from the inside and the outside. Include forces in the external environment and internal functional areas, as well as both internal and external stakeholders. In other words, what components of a business have come together with Wanda's work? Like any graphical representation, there needs to be an explanation of what the graphic represents! Along with the graphic that you create, provide Wanda with a written description of the following: - The components of her external environment - Internal functional areas and their purpose - Internal and external stakeholders in Wanda's business
As per the given scenario, Wanda has created a business with stakeholders and all of the internal workings and structure of a business.
External Environment: External environment refers to the factors outside the organization that have an impact on the organization. It includes Economic, Technological, Political, Legal, and Social factors. Components of external environment in Wanda's business:
Economic factors: Economic factors include business cycles, inflation rates, exchange rates, and interest rates. Technological factors: Technological factors refer to innovation in technology that can impact the business, such as automation, digitalization, and robotics.
Political factors: Political factors include regulations, policies, and laws that can affect business operations. Legal factors: Legal factors refer to regulations related to labor laws, employment laws, and business laws.
Social factors: Social factors include the demographic and cultural factors that can affect consumer behavior. Internal functional areas and their purpose: The internal functional areas of a business represent different departments that have unique responsibilities.
These departments work together to achieve common organizational goals. The main internal functional areas of a business are:
Marketing: Marketing department is responsible for creating awareness about the company’s products and services, and generating sales. Finance: Finance department is responsible for managing the company's finances and financial reporting.
Operations: Operations department is responsible for producing the company's products and services. Human Resources: Human Resources department is responsible for hiring, training, and managing employees. Internal and external stakeholders in Wanda's business: Internal stakeholders: Internal stakeholders are individuals or groups that are part of the organization, such as employees, managers, and shareholders.
External stakeholders: External stakeholders are individuals or groups that are not part of the organization, such as customers, suppliers, government, and community. Customers: Customers are external stakeholders who purchase products or services from the company. Suppliers: Suppliers are external stakeholders who provide raw materials or services to the company. Government: Government is an external stakeholder that can influence business operations through laws and regulations.
Community: Community is an external stakeholder that can influence business operations through social responsibility. Therefore, Wanda's business consists of various internal and external factors that influence its operations. Understanding these factors and their impacts is crucial for running a successful business.
Learn more about Stakeholders:
brainly.com/question/15532995
#SPJ11