A student sets up the following equation to convert a measurement.
(The ? stands for a number the student is going to calculate.)
Fill in the missing part of this equation.

The boiling point of a solution consisting of cyclohexane (c6h12) dissolved in benzene if the freezing point of this solution is 0. 0°c is 80.9°C.

When a solute and a solvent are combined to form a liquid homogeneous mixture or solution, the properties that result are different from those of the pure substances. As a result, we can find a freezing point depression, boiling point elevation, and a few other cooperative properties, but these two are the focus of this article.

Taking into account that the freezing point depression constant solely depends on the solvent (cyclohexane), we can begin by utilizing the freezing point depression to determine the molality of the solution:

[tex]T_{fsolution} - T_{fsolvent} = -m * {K_{fsolvent}[/tex]

0. 0°c - 5.5°c = -m * 20.0 °c

[tex]m = \frac{-5.5}{- 20.0 }[/tex]

m = 0.275 m

The boiling point elevation formula is then used to get the solution's boiling point, which is once more dependent on the solvent's boiling point elevation constant:

[tex]T_{b, solution} - T_{b, solute} = m * Kb_{solvent} \\\\T_{b, solution} - 80.1 = 0.275m + 2.79\\\\T_{b, solution} = 80.9[/tex]

Therefore, The boiling point of a solution is 80.9°C.

To know more about boiling point refer to: https://brainly.com/question/14895798

#SPJ1

[tex] \qquad \qquad \bf \huge\star \: \: \large{ \underline{Answer} } \huge \: \: \star[/tex]

B. How much of the reactants are needed and how much product will be made.

Chemists use mole in calculations to calculate the amount of product that will be formed when certain known amount of reactants are used at the end of reaction.

The moles are used to determine the atoms and molecules in a substance. It is used by chemists to determine the amount of reactants needed and products produced. Thus, option B is correct.

A mole is said to be defined as the estimation of the small entities like the atoms as that of the Avagadro's number 6.022 × 10²³. It defines the number of particles contained in a substance.

The moles of the substances are determined by the mass of the substance and its molar mass. The moles are given as,

Moles = mass ÷ molar mass

The moles give the estimation of the amount of the reactants needed to produce the products in a chemical reaction.

Therefore, option B. the moles tell the amount of the reactants required to produce the product.

Learn more about moles here:

https://brainly.com/question/16188500

#SPJ2

If a person wearing such a mask exhales 0. 65g of [tex]CO_{2}[/tex] every minute then the  number of grams of [tex]O_{2}[/tex]  that will be produced in 15 minutes is  7.09 grams .

Calculation ,

Since number of moles of carbon dioxide exhale is equal to the number of moles of oxygen produce ,

Mass of carbon dioxide exhale per minute = 0.65 g

Mass of carbon dioxide exhale 15 minute = 0.65 g × 15 = 9.75 g

Number of moles of carbon dioxide = given mass / molar mass = 9.75 g/44

Number of moles of carbon dioxide = 0.221 moles

Number of moles of oxygen  = 0.221 moles = given mass / molar mass

Number of moles of oxygen  = 0.221 moles  = given mass / 32

Mass of oxygen  = 0.221 moles × 32 = 7.09 grams

To learn more about number and grams

https://brainly.com/question/482478

#SPJ4

Answer: All have something wrong with them!!!

Explanation: #1: He is using chemicals without using any goggles or protection

#2: She is unsupervised while around fire as well as no protection

#3:

#4: There are many flammable things around the fire especially since its paper it could start a major fire

#5: Again has no protection (goggles. gloves, e.t.c.) and putting chemicals close to your face is just a Don't in science

#6: They are "horseplaying" and also someone else is doing all the work

Answer:

3.3 x 10⁻¹⁷ Hz    

Explanation:

To find the frequency, you can use the following equation:

E = h / f

In this equation,

-----> E = energy (J)

-----> h = Planck's Constant (6.626 x 10⁻³⁴ J*s)

-----> f = frequency (Hz)

You can plug the given values into the equation and simplify to find the frequency. This equation will require a little bit of rearranging.

E = h / f                                                        <----- Given equation

(2.0 x 10⁻¹⁷ J) = (6.626 x 10⁻³⁴ J*s) / f         <----- Insert values

(2.0 x 10⁻¹⁷ J) x f = (6.626 x 10⁻³⁴ J*s)        <----- Multiply both sides by f

f = 3.3 x 10⁻¹⁷ Hz                                        <----- Divide both sides by 2.0 x 10⁻¹⁷

The frequency of an x-ray wave with an energy of 2.0 x 10^-17 J is 3.3 x 10⁻¹⁷ Hz.

The term frequency is defined as the number of waves that pass a fixed point in unit time. Frequency is measured in hertz which is equal to one event per second.

Frequency also describes the number of cycles undergoes during one unit of time by a body in periodic motion.

Calculating the frequency, you can use the following equation:

E = h / f

Where,

E = energy (J)

h = Planck's Constant (6.626 x 10⁻³⁴ J*s)

f = frequency (Hz)

Insert his values in the given equation

(2.0 x 10⁻¹⁷ J) = (6.626 x 10⁻³⁴ J × s) / f        

(2.0 x 10⁻¹⁷ J) x f = (6.626 x 10⁻³⁴ J × s)        

f = 3.3 x 10⁻¹⁷ Hz                

Thus, The frequency of an x-ray wave with an energy of 2.0 x 10^-17 J is 3.3 x 10⁻¹⁷ Hz.

To learn more about the frequency, follow the link;

https://brainly.com/question/5102661

#SPJ2

Answer:

102 g Al₂O₃

Explanation:

The theoretical yield is the mass of product calculated via the molar masses and balanced chemical equation.

The limiting reagent is the reactant that is completely reacted before the other reactant(s) are used up. Since Al produces the smaller amount of product, it appears that Al is the limiting reactant. You can only make as much product as the limiting reactant allows. As such, the theoretical yield is 102 grams Al₂O₃.

Answer:

136 g Al₂O₃

Explanation:

Assuming you do not need to find the limiting reactant, to find the mass of Al₂O₃, you need to (1) convert grams O₂ to moles O₂ (via molar mass), then (2) convert moles O₂ to moles Al₂O₃ (via mole-to-mole ratio from equation coefficients), and then (3) convert moles Al₂O₃ to grams Al₂O₃ (via molar mass). It is important to arrange the conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the sig figs of the given value (64.0 g).

Molar Mass (O₂): 32 g/mol

Molar Mass (Al₂O₃): 102 g/mol

4 Al + 3 O₂ -----> 2 Al₂O₃

64.0 g O₂           1 mole           2 moles Al₂O₃            102 g
-----------------  x  --------------  x  ------------------------  x   -------------  =  136 g Al₂O₃
                             32 g               3 moles O₂             1 mole

Answer:

Explanation:

Based of the fact that you were given 2 masses I would assume this to be a limiting reagent question. However amount on the left side both equal 2. Ignoring limiting reagents and focusing on just O2 the steps would be:

1. Make sure the equation is balanced ( already given)

2- Use given values to find the mols of O2 (mass/molar mass)

3. Mols are conserved but due to the coefficients the molar value from O2 must be divided by three and multiplied by 2 to ensure proper ratios

4. Using that amount the mass can derived using amount/molar mass

5. Use proper significant digits and units(3 in this case)

Considering the Dalton's partial pressure, the mole fraction of each gas is:

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex]

where n is the amount of gases in the gas mixture.

This relationship is due to the assumption that there are no attractive forces between the gases.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In summary, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.

Mole fraction of each gas

In this case, you know that:

Then:

Substituting the corresponding values:

Solving:

In summary, the mole fraction of each gas is:

Learn more about Dalton's partial pressure:

brainly.com/question/14239096

brainly.com/question/25181467

brainly.com/question/14119417

#SPJ1

Number of moles of KOH present in solution is 3.75.

The term "mole" refers to a mole's atomic mass, which is expressed in grams. A mole is an element's gram-atomic mass, or mass.

The mole idea equates the mass of a single atom or molecule (measured in a.m.u.) to the mass (measured in grams) of a large collection of equivalent molecules.

To calculate moles of potassium hydroxide in 750 ml of 5.00 m of KOH solution -

Mathematically molarity  is expressed as,

Molarity =no. of molecules of solute/volume of solution

Given: Molarity of solution = 5.00 M

Volume of solution = 750 ml = 0.750 l

∴ 5 = no. of moles/0.750

∴ number of moles = 3.75

Hence, number of moles of KOH present in solution is 3.75.

Learn more about mole concept ,here:

https://brainly.com/question/12805690

#SPJ4

The molecular weight of this gas will be 45 g/mol .

The state equilibrium equation for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has significant drawbacks, it represents a decent approximation of the activity of many gases under various conditions.

Ideal gas law can be expressed as:

PV =nRT

Calculation of molecular weight by using ideal as law.

Given data:

P = 3 atm

T = 127 °c

Density =  4. 20 grams per liter

PV =nRT

where p is pressure , T is temperature and R is gas constant.

PV = gram / molecular weight RT

Molecular weight = (g/v)( 1/P) RT

Putting the given data in above equation.

Molecular weight =4.20 × 1/ 3× 400 × 0.0831

Molecular weight = 45 g/mol.

To know more about Molecular weight

https://brainly.com/question/27988184

#SPJ4

Yes, we can use this balance to  estimate the mass to the nearest milligram.

The weighing balance is the kind of scale that can be used to measure the mass of a body. We know that mass is the quantity of matter that is contained in a  body and the the SI unit of mass is the kilogram.

Looking at the balance as it is graduated in milligrams, we know that measurement to the nearest gram means measurement to the nearest whole number so we can say that the answer is yes. We can use this balance to  estimate the mass to the nearest milligram.

Learn more about weighing balance:https://brainly.com/question/19863668

#SPJ1

The equilibrium constant of the system is 11.3.

We know that the equilibrium constant shows the extent to which reactants are converted into products.

Now;

2NO2 ⇄ N2O4

[NO2] = 0.500 mol /1 L =  0.500 M

[N2O4] =  0.186 mol  /1 L =  0.186 M

The ICE table is;

          2NO2 ⇄ N2O4

I           0.5           0

C         -2x              +x

E          0.5 - 2x     0.186

The concentration of NO2 at equilibrium = 0.5 - 2(0.186) = 0.128

Keq =  0.186/( 0.128)^2

Keq = 11.3

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

The binding energy of the electron is 1.237 ×10^(-16) kj/ mol.

The given parameter

wavelength of photon,

                       λ = 0.999nm

                          = 0.999x10⁻⁹ m

K.E of emitted photon,

                    K.E = 940 ev

The binding energy of electron is calculated as follows:

From Einstein's mass defect equation=

                    ΔE = Δmc²

Also, from Einstein's photo electric equation=

                       E = Ф + K.E

Where;

          Ф is binding energy of electron on metal surface.

The energy of on mole of electron, the emitted is calculated as:

                       [tex]E = hf =h \frac{c}{λ} = (6.626×10^{-34} ) × \frac{{3×10^{8} }}{0.999×10^{-9} } \\\\E= 1.989×10^{-16}[/tex]

The K.E of emitted electron in Joules is

                 [tex]K.E = 940 × \frac{1}{2} ×1.602 ×\ 10^{-19} J\\\\ = 0.752 × 10^{-16} J[/tex]

The binding energy is electron is calculated as:

               [tex]Ф = E - K.E\\= (1.989 - 0.752) ×10^{-16}\\ =1.237 × 10^{-16} J[/tex]

Question: An X-ray photon of wavelength 0.999nm strikes a surface. The emitted electron has a kinetic energy of 940 eV. What isthe binding energy of the electron in kJ/mol? (KE=1/2mv2; 1 electron volt (eV) = 1.602 x10-19J)

Learn more about binding energy: https://brainly.com/question/15718710

#SPJ4

Answer:

It's too short. Write at least 20 characters to explain it well.

Explanation:

It's too short. Write at least 20 characters to explain it well.

Oxygen is the crucial gas required for an organism to carry out the cellular process. The seal can dive for 4 minutes before it runs out of oxygen. Thus, option a is correct.

Oxygen is the most vital element of the organism that is required by almost all cellular and metabolic activities. It is inhaled by the respiratory system and passed to cells and tissues through the circulatory system.

Given,

Mass of seal = 100 kg = 100000 gm

Rate of oxygen consumption (r) = 1 ml/ (gh)

The volume of the stored O₂ = 7000 mL

The time (t) is calculated as,

t = V ÷ mr

Substituting the values above,

t = 7000 ÷ 100000 × 1

= 0.07 hour

In minutes it will be given as,

0.07 × 60 = 4.2 minutes

Therefore, option a. 4 minutes is the time till the seal can remain underwater without oxygen.

Learn more about oxygen consumption here:

https://brainly.com/question/13959817

#SPJ4

Your question is incomplete, but most probably your full question was, The oxygen consumption rate of a 100 kg seal is 1 ml/(g h). assuming that it has oxygen stores of 7 liters, how many minutes can it dive before running completely out of oxygen?

When hexan-1-ol is treated with conc. H₂SO₄ at moderate temperatures, Di-n-hexyl ether is formed via SN₂ mechanism.

SN₂ Mechanism is mechanism involving the factors of steric hindrance following the order of 1° > 2° > 3°. It is a Nucleophilic substitution reaction.

Williamson Ether Synthesis is the synthesis of ether through SN₂ mechanism in which an ether is treated with conc. H₂SO₄ at moderate temperature.

When hexan-1-ol is treated with conc. H₂SO₄ at moderate temperatures, Di-n-hexyl ether is formed as below:

CH₃CH₂CH₂CH₂CH₂CH₂OH +Conc. H₂SO₄-->(CH₃CH₂CH₂CH₂CH₂CH₂)₂0

Hexan-1-ol                                                                 Di-n-hexyl ether

Williamson Ether Synthesis is a reaction involving a alcohol that is deprotonated to form an ether.

Learn more about Williamson Ether Synthesis here, https://brainly.com/question/2622808

#SPJ4

The major product of reaction between 1-butanol and Na2Cr2O7 is butanoic acid.

When a primary alcohol like 1-butanol (OH is bonded to a primary carbon) is begin to oxidize in the presence of strong oxidizing reagent such as sodium dichromate (Na2Cr2O7) and H2SO4, sulfuric acid, the stepwise oxidation take place as above firstly to the corresponding aldehyde which undergoes further oxidation to the corresponding carboxylic acid.

You can find that the formed aldehyde after first oxidation is butanal and the only organic product, due to the strong oxidizing reagent is butanoic acid.

Thus, the major product formed is butanoic acid.

learn more about oxidation:

https://brainly.com/question/13059271

#SPJ4

The hybridization of the central atom in SCl₂ is sp³.

Lewis structure is also known as Lewis dot structure which simply represent the valence electron of an atom.

Hybridization is defined as the mixing of two atomic orbitals belongs to same atom but having entirely different shapes , energies which produces a new hybridized orbitals.

Now first write the electronic configuration of central atom.

The central atom in SCl₂ is S (Sulphur).

Electronic configuration of S: [Ne] 3s² 3p⁴

One 3s and three 3p undergo hybridization to form sp³ orbitals. Here each atom forms bond with one sp³ hybrid orbital.

Thus from the above conclusion we can say that The hybridization of the central atom in SCl₂ is sp³.

Learn more about the Hybridization here: https://brainly.com/question/24180903

#SPJ4

The element "X" is "O" (oxygen).

Given,

Chemical formula = Na₂CX₃

Formula mass = 106 amu

Molar mass of Na = 23 amu

Molar mass of C = 12 amu

To find,

Element X =?

We will equate the equation as follows,

2(23) + 12 + 3(y) = 106

46 + 12 + 3y =106

58 + 3y = 106

3y = 106 - 58

3y = 48

y = 48/3

y = 16

We know that Oxygen has molecular mass of 16. Therefore the element "X" is "O".

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

The pH of a  a 0. 10 m solution of NaCN at 25°C is 11.15

Calculation

The reaction in the solution is given below

                   [tex]CN^{-} + H_{2} O[/tex] → HCN + [tex]OH^{-}[/tex]

initial                    0.1

change           ( -x)                (+x)

equilibrium     (  0.1 - x )         x

Kb = [HCN] [[tex]CN^{-}[/tex] ]/[[tex]CN^{-}[/tex] ]

Kb × Ka = Kw = 1.0 × [tex]10^{-14}[/tex]

Kb =  1.0 × [tex]10^{-14}[/tex] / 4.9  × [tex]10^{-10}[/tex] =  [HCN] [[tex]CN^{-}[/tex] ]/[[tex]CN^{-}[/tex] ] = [tex]x^{2}[/tex]/ (  0.1 - x )

Kb =  2.04× [tex]10^{-5}[/tex] = [tex]x^{2}[/tex]/ (  0.1 - x )

Since , [NaCN] /Kb > 100 , we can simplify the above equation to

=  2.04× [tex]10^{-5}[/tex] = [tex]x^{2}[/tex]/ (  0.1 )

x = 1.43 × [tex]10^{-3}[/tex] M = [HCN] = [ [tex]OH^{-}[/tex]]

Then pOH = 2.84

pH + pOH = 14

pH = 14- pOH = 14 - 2.84 = 11.15

Therefore , the pH is 11.15

learn about pH and solution

https://brainly.com/question/11300720

#SPJ4

Answer: B: Your ears send a message through the nerves to the brain.

Answer:

B!!!!

Explanation:

hope this helps! :D

The option that is most likely to be true regarding L76, L77, and L79  is that option B: The assembly would incur an entropic penalty if they occupied a solvent-exposed site.

The entropic penalty in regards to ordered water is known to be one that tells or account  for any form of  weaker binding of the antibiotic novobiocin to what we call resistant mutant of DNA gyrase.

Note that in regards to the scenario above, the Entropic penalty is seen as the thermodynamically disfavored needs that is required in forming a cage of polar solvent molecules that is known to be seen around surface that has exposed hydrophobic potion of a molecule.

Hence, The option that is most likely to be true regarding L76, L77, and L79  is that option B: The assembly would incur an entropic penalty if they occupied a solvent-exposed site.

Learn more about octamer from

https://brainly.com/question/13198179

#SPJ1

See full question below

When Bs1A is assembled as an octamer, what is most likely to be true regarding L76, L77, and L79?

A. They are oriented toward the solvent-exposed exterior of the protein assembly.

B. The assembly would incur an entropic penalty if they occupied a solvent-exposed site.

C. Unlike in a monomer, they are not situated within the hydrophobic cap.

D. Their physiochemical properties are not substantially dependent on their hydrophobicity

The rate of reaction of the value of KIS 3 and [A] and [B] are each 2M is: 24 (mol/L)/s (Option B)

In chemistry, the rate of reaction describes how quickly a chemical reaction develops.

It is frequently described in terms of either the concentration of a reactant that is spent in a unit of time or the concentration of a product that is generated in a unit of time (amount per unit volume).

Recall that the rate equation is:
Rate = K[A]²[B]

Hence:

Concentration of A = 2M

Concentration of B = 2M

K = 3

Taking the values and substituting them, we have:

Rate = 3 (mol/L)⁻³/s×[2]² ×[2]

Rate = 24 (mol/L)⁻³/s

The rate of reaction can be used as a valuable diagnostic tool. We may devise strategies to increase production by learning how quickly things are created and what slows down reactions.

This knowledge is necessary for the industrial production of various chemicals, such as:

Learn more about rate of reaction:
https://brainly.com/question/24795637
#SPJ1

Rutherford's scattering experiment demonstrated that the mass of an atom was uniformly distributed throughout its volume this statement is incorrect.

Hence, Option B is correct answer.  

Rutherford's Alpha Scattering Experiment demonstrated that Rutherford bombarded most of the alpha particles passed straight through the gold foil. Rutherford observed that most part of the atom is empty.

The mass of an atom was uniformly distributed throughout its volume this experiment was given by Thomson Model.

Thus from the above conclusion we can say that Rutherford's scattering experiment demonstrated that the mass of an atom was uniformly distributed throughout its volume this statement is incorrect.

Hence, Option B is correct answer.  

Learn more about the Rutherford's scattering experiment here: https://brainly.com/question/14016459

#SPJ4

Answer:

CrO₂ --------------------> Cr⁴⁺ and O²⁻

VCO₃ -------------------> V²⁺ and CO₃²⁻

Cr₂(SO₄)₃ -------------> Cr³⁺ and SO₄²⁻

(NH₄)₂S ----------------> NH₄⁺ and S²⁻

Explanation:

Within ionic compounds, the cation is listed first, followed by the anion. Some of the ions are polyatomic, meaning they are covalently bonded to other elements. Polyatomic ions always have a specific charge.

All of these ionic compounds have an overall charge of 0. As such, the charges of the cations and anions must balance out. In order to do so, there are some compounds which have more than one atom of each ion.

2.) CrO₂

------> Oxygen (O) always forms the anion, O²⁻.

------> Therefore, if there are 2 oxygen anions, the chromium (Cr) must have the cationic form of Cr⁴⁺.

------> +4 + (-2) + (-2) = 0

3.) VCO₃

------> Carbonate (CO₃), a polyatomic ion, always has the state CO₃²⁻.

------> If there is only one atom of each ion, the charges must perfectly balance, making vanadium (V) be the cation V²⁺.

------> +2 + (-2) = 0

4.) Cr₂(SO₄)₃

------> Sulfate (SO₄), a polyatomic ion, always has the state SO₄²⁻.

-------> The only way the charges could balance out is if the chromium (Cr) is in the cationic form Cr³⁺.

------> +3 + 3 + (-2) + (-2) + (-2) = 0

5.) (NH₄)₂S

------> Ammonium (NH₄), a polyatomic ion, always has the state NH₄⁺.

------> Sulfur (S) always forms the anion S²⁻.

------> +1 + 1 + (-2) = 0

In the above question the probability the electron will tunnel through the barrier is 0.011%.

An electron volt is the amount of energy required to move a charge equal to 1e⁻ across a potential difference of 1eV.

To calculate the probability the electron will tunnel through the barrier is calculated as -

Energy of electron

E=80eV

=80×1.6×10⁻¹⁹

=128×10⁻¹⁹

Height of the barrier U=100 eV

=100×1.6×10⁻¹⁹J

Thickness L=0.2×10⁻⁹m

Probability T=e⁻²cl

C=√2m(U-E)/h

=√[2×1.67×10⁻²⁷(160-128)×10⁻¹⁹] / 1.055×10⁻³⁴

=10.34×10⁻²³/1.055×10⁻³⁴

=9.8×10¹¹

2CL=2×9.8×10¹¹×0.2×10⁻⁹

=3.92×10²

T=e⁻²cl

= 1/e⁻³⁹²/¹⁰⁰⁰⁰

=0.0198%

=0.011%

Hence ,the probability the electron will tunnel through the barrier is 0.011%.

Learn more about electron volt ,here:

https://brainly.com/question/17136195

#SPJ4

The consideration element is the correct answer.

The exchange of the value is called consideration. The exchange of money is known as value for anything such as services/property, exchange of property, or services.

There are many types of considerations that are given below:

The four important elements of a contract are given below:

If any of the given elements is missing then the contract is voided, and the parties released from the agreement.

Learn more about the contract: https://brainly.com/question/18635207

#SPJ4

Answer:

1. Carbon is very special because it can form so many compounds

2. Many carbon-based compounds are not attracted to water and so in general do not dissolve in water. As a result, water alone cannot be used to remove grease or oil from a surface, nor will water dissolve our skin, because all of these things are carbon compounds.

3. Carbon can also link together in long chains or rings, carbon to carbon to carbon to carbon and so on.

Explanation:

The pH of a buffer solution with acid that (PKA 6. 1) is exactly half as concentrated as its conjugate base is 6.4.

A buffer solution is a solution that has a maintained pH, not basic or not acidic. Its pH changes when acid or base is added to the solution.

We had to figure out the acid's concentration, which is exactly half that of its potential base.

We know that pH = pH_log

We have less than 6.1 pH so this is a conjugated base.

This will equal to 6.1 + log2 = 6.4

Thus, the pH of a buffer solution with acid is 6.4.

To learn more about buffer solutions, refer to the below link:

https://brainly.com/question/13169083

#SPJ4

When formaldehyde and acetone then react with each other( aldol condensation) then it will be formed methyl vinyl ketone.

In organic chemistry, an aldol condensation would be a condensation reaction in which an enol and enolate ion combines with a carbonyl chemical to produce a -hydroxy aldehyde or -hydroxy ketone, that is then dehydrated to produce a conjugated enone.

In aldol condensation, when  formaldehyde and acetone then react with each other then it will be formed methyl vinyl ketone.

It can be written as

[tex]CH_{2} O + CH_{3} COCH_{3}[/tex] → [tex]HOCH_{2} -CH_{2} -CO-CH_{3}[/tex]

When it will be heated then it gives methyl vinyl ketones.

[tex]HOCH_{2} -CH_{2} -CO-CH_{3}[/tex] → [tex]CH_{2} =CH-CO-CH_{3}[/tex]

So, the pair of reactants will be formaldehyde and acetone

To know more about aldol condensation

https://brainly.com/question/9415260

#SPJ4