The distance the plane moves is 15.24 meters. Speed of the plane=155 mi/h Time=2.50 s.
(a) Average acceleration of the plane can be calculated as follows: Convert the speed of the plane from mi/h to m/s155 miles/hour = 155*1.60934 = 249.4489 meters/hour 249.4489 meters/hour = 249.4489/3600 meters/second≈0.0693 m/s
Average acceleration (a) = Change in velocity (v) / Time taken (t)= (final velocity - initial velocity)/t=
(155/2.24)/2.50= 30.47/2.50= 12.19 m/s²
(b) Distance traveled by the plane can be calculated using the formula:
Distance = Initial velocity × Time + 1/2 × Acceleration × Time²
Initial velocity = 0 Distance = Initial velocity × Time + 1/2 × Acceleration × Time²
= 0 × 2.50 + 1/2 × 12.19 × 2.50²= 15.24 meters (approx).
Therefore, the distance the plane moves is 15.24 meters.
Learn more about Acceleration here ;
https://brainly.com/question/2303856
#SPJ11
Unless othenvise stated, alf objocts are locatod near the Earth's surlace, where g=9.80 m/s
2
A loaded Booing 747 jumbo jet has a mass of 20×10
5
kg What net force is required to give the plane an acceleration of 3.0 m/s
2
down the nunasy for takeolfs? Express your answer using two significant flgures.
A Boeing 747 jumbo jet has a mass of 20 x 105 kg.
The question asks what net force is required to give the plane an acceleration of 3.0 m/s² down the runway for takeoffs?First, we should calculate the force required to give the airplane an acceleration of 3.0 m/s².
This can be found using the following formula:F = m x aWhere F = force, m = mass and a = acceleration.Substituting the values given in the question:[tex]F = (20 x 105) kg x 3.0 m/s²F = 6.0 x 105 N[/tex]Now we have the force required to give the airplane an acceleration of 3.0 m/s².
This is not the net force required, since there are other forces acting on the plane when it is taking off.
The net force required to give the plane an acceleration of 3.0 m/s² can be found using Newton's second law of motion, which states:F_net = maWhere F_net = net force, m = mass and a = accelerationSubstituting the values given in the question:[tex]F_net = (20 x 105) kg x (9.8 + 3.0) m/s²F_net = 4.5 x 106 N[/tex]
The net force required to give the plane an acceleration of 3.0 m/s² down the runway for takeoffs is 4.5 x 106 N.
To know more about jumbo visit:
https://brainly.com/question/30766050
#SPJ11
(8%) Problem 14: A jet traveling at Mach 2.5 flies at an altitude of 8.0 km. The jet passes directly over an observer standing on the ground (call this t = 0) and then at some later time t, the observer hears a sonic boom. The average speed of sound in air, over the path of the sound, is 334 m 50% Part (a) How long, in seconds, after the jet passes directly over the observer does she hear the boom? t = S ▷ A 50% Part (b) What horizontal distance (measured from the location of the observer) does the jet travel before the shock wave reaches the observer? Express in kilometers. X = km Grade Summary Deductions
To solve this problem, we can first calculate the time it takes for the sonic boom to reach the observer, and then determine the horizontal distance traveled by the jet before the shock wave reaches the observer.
a) To find the time it takes for the sonic boom to reach the observer, we need to consider the speed of sound and the altitude of the jet. The average speed of sound in air is given as 334 m/s. The altitude of the jet is 8.0 km, which is equivalent to 8,000 meters.
Using the formula for time, which is distance divided by velocity, we can calculate the time:
t = distance / velocity
t = 8,000 m / 334 m/s
t ≈ 23.95 seconds
Therefore, the observer will hear the sonic boom approximately 23.95 seconds after the jet passes directly over them.
b) To determine the horizontal distance traveled by the jet before the shock wave reaches the observer, we need to consider the speed of sound and the time it takes for the sonic boom to reach the observer.
The speed of sound remains constant at 334 m/s, and we have already calculated the time as 23.95 seconds. Therefore, we can find the horizontal distance using the formula:
distance = velocity × time
distance = 334 m/s × 23.95 s
distance ≈ 7,996.3 meters
Converting meters to kilometers:
distance ≈ 7.9963 kilometers
Therefore, the jet travels approximately 7.9963 kilometers horizontally from the location of the observer before the shock wave reaches them.
To learn more about sonic boom, Click here:
https://brainly.com/question/31609435
#SPJ11
Two 11.0Ω resistors are connected across the terminals of a 6.0 V battery, drawing a current of 0.43 A. a. A voltmeter is placed across the terminals of the battery. What is the reading on the voltmeter? (2) b. Calculate the internal resistance of the battery. (2)
a. The reading on the voltmeter placed across the terminals of the battery will be 6.0 V.
b. The internal resistance of the battery can be calculated as 5.6 Ω.
a. The reading on the voltmeter placed across the terminals of the battery will be the same as the battery's voltage, which is given as 6.0 V. This is because the voltmeter is connected directly across the terminals of the battery, measuring the potential difference (voltage) across it.
b. To calculate the internal resistance of the battery, we can use Ohm's law. The current flowing through the circuit is given as 0.43 A. The total resistance in the circuit can be calculated by adding the resistances of the two 11.0 Ω resistors connected in parallel, which gives a total resistance of 5.5 Ω.
Using Ohm's law, V = I * R, where V is the voltage, I is the current, and R is the resistance, we can rearrange the equation to solve for the internal resistance of the battery. Rearranging the equation, we have R = V / I. Plugging in the values of V as 6.0 V and I as 0.43 A, we can calculate the internal resistance as 5.6 Ω.
Therefore, the reading on the voltmeter will be 6.0 V and the internal resistance of the battery is 5.6 Ω.
Learn more about voltmeter here:
https://brainly.com/question/1511135
#SPJ11
A string of length L is displaced at its midpoint by a distance d and released at t=0. Find the first two normal modes that are excited and their amplitudes in terms of the initial displacement d.
The amplitude of the third normal mode is given by: (4d/3π) * sin(3πx/L). The wave equation of a string is given by :∂²y/∂x² = (1/v²)∂²y/∂t², where y is the displacement of the string, v is the velocity of the wave in the string, t is time and x is the position of any element in the string.
Using the general solution for the wave equation as y(x,t) = Σ(Ancos(nπvt/L) + Bnsin(nπvt/L)), we get, y(x,t) = Σ(An + Bncos(nπvt/L))sin(nπx/L), where An and Bn are constants of integration.
We have the following initial condition:y(L/2, 0) = dIf we apply this initial condition in the expression of y(x,t),
we get: y(x,t) = 4d/π * [sin(πx/L) + (1/3)sin(3πx/L) + (1/5)sin(5πx/L) + ...] * cos(πvt/L) (odd function).
Therefore, the string has odd symmetry.
Hence, only odd harmonics are present and the wave has the fundamental frequency and its odd harmonics. Therefore, the first two normal modes that are excited are: n = 1 and n = 3.
The amplitude of the first normal mode (fundamental frequency) is given by: 4d/π * sin(πx/L).
The amplitude of the third normal mode is given by: (4d/3π) * sin(3πx/L).
Learn more about wave equation here ;
https://brainly.com/question/4692600
#SPJ11
A layer of oil (n = 1.45) floats on a tank of water (n=1.33). Underneath the water is heavy glass (n=1.7), Finally there is air (n = 1.00) above the oil and below the glass. A light ray makes an angle of 35 degrees (incident) as it enters this sandwich. What angle does it make with the glass as it exits the sandwich? (Please show work and drawing)
The light ray entering the sandwich at an angle of 35 degrees exits the sandwich making an angle of approximately 28.67 degrees with the glass. This is determined by applying Snell's law and considering the refractive indices of water, oil, and glass.
To determine the angle at which the light ray exits the sandwich, we can apply Snell's law, which states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the refractive indices of the two media involved.
Since the light ray travels from water to oil, the angle of incidence in water is 35 degrees. We can calculate the angle of refraction in oil using Snell's law:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Here, n₁ is the refractive index of water (1.33), θ₁ is the angle of incidence in water (35 degrees), n₂ is the refractive index of oil (1.45), and θ₂ is the angle of refraction in oil.
Plugging in the values, we get:
1.33 * sin(35°) = 1.45 * sin(θ₂)
Solving for θ₂, we find:
θ₂ ≈ 32.85 degrees
Now, to find the angle with the glass as it exits the sandwich, we can again apply Snell's law, this time considering the transition from oil to glass. Using similar calculations, we find that the angle of refraction in glass is approximately 28.67 degrees.
Therefore, the angle the light ray makes with the glass as it exits the sandwich is approximately 28.67 degrees.
To know more about Snell's law,
https://brainly.com/question/31432930
#SPJ11
The radius of curvature of a spherical concave mirror is 15 cm. Describe the image formed when a 20 mm tall object is positioned a) 5 cm from the mirror, b) 20 cm from the mirror. For each case give the image distance, the image height, the type of image (real or virtual), and the orientation of the image (upright or inverted). Express your answer with the appropriate units.
(a) When the object is placed 5 cm from the concave mirror, the object distance (u) is -5 cm (-0.05 m). Using the mirror formula 1/f = 1/v + 1/u, where f is the focal length of the mirror, we can calculate the image distance (v). With a focal length of 15 cm (0.15 m), the equation becomes 1/0.15 = 1/v + 1/-0.05. Solving this equation, we find 1/v = 6.67 - (-20), resulting in 1/v = 26.67.
Thus, v is approximately 0.0375 m (3.75 cm). The magnification (m) is given by -v/u, which is -3.75/(-0.05) = 150 mm (15 cm). The image is real and inverted.
(b) When the object is placed 20 cm from the concave mirror, the object distance (u) is -20 cm (-0.2 m). Applying the mirror formula, 1/f = 1/v + 1/u, with a focal length (f) of 15 cm (0.15 m), we obtain 1/0.15 = 1/v + 1/-0.2. Solving this equation, we find 1/v = 6.67 - (-5), resulting in 1/v = 11.67. Hence, v is approximately 0.0856 m (8.56 cm). The magnification (m) is -v/u, which is -8.56/-0.2 = 0.856 m (85.6 cm). The image is real and inverted.
In summary, when the object is placed 5 cm from the concave mirror, the image is real, inverted, located at approximately 3.75 cm from the mirror, and has a magnification of 15 cm. When the object is placed 20 cm from the mirror, the image is also real, inverted, located at around 8.56 cm from the mirror, and has a magnification of 85.6 cm.
To Learn more about concave Click this!
brainly.com/question/14093215
#SPJ11
A Particle in a Magnetic Field When moving in a magnetic field, some particles may experience a magnetic force. Without going into details - a detailed study of magnetic phenomena comes in later chapters-let's acknowledge that the magnetic field
B
is a vector, the magnetic force
F
is a vector, and the velocity
u
of the particle is a vector. The magnetic force vector is proportional to the vector product of the velocity vector with the magnetic field vector, which we express as
F
=ζ
u
×
B
. In this equation, a constant ζ takes care of the consistency in physical units, so we can omit physical units on vectors
u
and
B
. In this example, let's assume the constant ζ is positive. A particle moving in space with velocity vector
u
=−5.0
i
^
−2.0
j
^
+3.5
k
^
enters a region with a magnetic field and experiences a magnetic force. Find the magnetic force
F
on this particle at the entry point to the region where the magnetic field vector is (a)
B
=7.2
i
^
−
j
^
−2.4
k
^
and (b)
B
=4.5
k
^
. In each case, find magnitude F of the magnetic force and angle θ the force vector
F
makes with the given magnetic field vector
B
.
The velocity vector is u = −5.0 i^−2.0 j^+3.5 k^The magnetic field vector B in the first case is B = 7.2 i^−j^−2.4 k^The magnetic field vector B in the second case is B = 4.5 k^The magnetic force is given as F = ζ u × BHere, ζ is positive. Thus, we need to find the magnetic force and the angle between the force and the magnetic field vector for the given values of B.
(a) Magnetic field vector B = 7.2 i^−j^−2.4 k^Magnetic force F = ζ u × BMagnetic force F = ζ | u | | B | sin θ nWe have ζ as a constant of proportionality, so the magnetic force F is directly proportional to the magnitude of the velocity vector u and the magnetic field vector B and is given byF = K | u | | B | sin θ (where K is a constant of proportionality) The magnitude of the velocity vector u = √(−5.0² − 2.0² + 3.5²) = √34.25The magnitude of the magnetic field vector B = √(7.2² + 1² + (−2.4)²) = √59.76Therefore, the magnitude of the magnetic force isF = K | u | | B | sin θNow, we know that sin θ = | u × B | / | u | | B |Therefore,F = K | u | | B | (| u × B | / | u | | B |)⇒ F = K | u × B |This implies that F is the magnitude of the vector product of the velocity and magnetic field vectors F = ζ | u × B |And the angle θ between the force vector and the magnetic field vector is sin θ = | u × B | / | u | | B |⇒ θ = sin−1 (| u × B | / | u | | B |)Putting the values in the above expressions, we get:
F = ζ | −5.0(−2.4) − 3.5(−1) | = ζ (11.7)The magnetic force at the entry point to the region where the magnetic field vector is B is 11.7ζ N.We need to find the angle θ made by the force vector F with the magnetic field vector B.We have,F = ζ | −5.0(−2.4) − 3.5(−1) | = ζ (11.7)Now,| u | = √(−5.0² − 2.0² + 3.5²) = √34.25, | B | = √(7.2² + 1² + (−2.4)²) = √59.76 and| u × B | = √[−5.0²(−2.4)² − 3.5²(−2.4)² + 3.5²(−1)²] = √46.49sin θ = | u × B | / | u | | B | = √46.49 / (34.25 59.76)⇒ θ = sin−1 (sin θ) = sin−1(√46.49 / (34.25 59.76)) = 34.4°(approx)
(b) Magnetic field vector B = 4.5 k^Magnitude of the velocity vector u = √(−5.0² − 2.0² + 3.5²) = √34.25Magnitude of the magnetic field vector B = √(0² + 0² + 4.5²) = 4.5Therefore, the magnitude of the magnetic force is F = ζ | u | | B | sin θF = ζ | u × B |And the angle θ between the force vector and the magnetic field vector is sin θ = | u × B | / | u | | B |⇒ θ = sin−1 (| u × B | / | u | | B |)We have,F = ζ | −5.0(0) − 2.0(0) + 3.5(4.5) | = ζ (15.75) = 15.75ζ NAs | u × B | = | −5.0(0) − 2.0(0) + 3.5(4.5) | = 15.75, we have the magnetic force as 15.75ζ N.The angle θ made by the force vector F with the magnetic field vector B issin θ = | u × B | / | u | | B | = √46.49 / (34.25 4.5)⇒ θ = sin−1 (sin θ) = sin−1(√46.49 / (34.25 4.5)) = 50.4°(approx).
Hence the magnetic force and the angle between the force and the magnetic field vector for the given values of B are Magnetic force and the angle between the force and the magnetic field vector for :
(a) are 11.7ζ N and 34.4°(approx).Magnetic force and the angle between the force and the magnetic field vector for (b) are 15.75ζ N and 50.4°(approx).About Magnetic fieldThe magnetic field in physics, is a field formed by moving electric charges which causes a force to appear on other moving electric charges. A magnetic field is a vector field: that is associated with every point in a vector space that can change with time. The strength of the magnetic force comes from the interaction between the magnetic poles caused by the movement of electric charges (electrons) on objects.
Learn More About Magnetic field at https://brainly.com/question/14411049
#SPJ11
in 2018, the James Webb Space Telescope is scheduled to launch. Which option is one of its new capabilities?
A. Being able to analyze the rocky terrains of new alien planets.
B. Being able to land on certain planets to retrieve samples.
C. Being able to investigate the atmospheres of alien planets and determine their molecular composition.
D. All options are correct.
C. Being able to investigate the atmospheres of alien planets and determine their molecular composition .The James Webb Space Telescope (JWST) is an advanced space observatory developed by NASA
The James Webb Space Telescope (JWST) is an advanced space observatory developed by NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). It was originally scheduled to launch in 2018 (though it actually launched on December 25, 2021), and it offers several new capabilities compared to previous space telescopes.
One of the key capabilities of the James Webb Space Telescope is its ability to investigate the atmospheres of alien planets and determine their molecular composition. By observing the light passing through the atmospheres of exoplanets, the telescope can analyze the different molecules present and provide valuable information about these distant worlds.
Options A and B are not accurate. The James Webb Space Telescope is an observatory located in space and is not designed to analyze rocky terrains or land on planets to retrieve samples. Therefore, the correct option is C: Being able to investigate the atmospheres of alien planets and determine their molecular composition.
To learn more about The James Webb Space Telescope follow:
https://brainly.com/question/8962979
#SPJ11
A small rock is thrown straight upward with an initial speed of 8.00 m/s from the edge of the roof of a building. The rock strikes the ground 2.50 s after leaving the thrower's hand. What is the height of the roof above the ground? Neglect air resistance. (a) 4.4 m (b) 10.6 m (c) 20.0 m (d) 50.6 m
The height of the roof above the ground is approximately 3.28 meters.
To find the height of the roof above the ground, we can use the equations of motion for vertical motion. Since the rock is thrown straight upward and neglecting air resistance, we can assume that the only force acting on it is gravity.
We can start by finding the time it takes for the rock to reach its highest point. Since the initial vertical velocity is 8.00 m/s and the final vertical velocity at the highest point is 0 (since the rock momentarily stops), we can use the equation:
vf = vi + at
0 = 8.00 m/s - 9.8 m/s^2 * t_max
Solving for t_max, we find t_max ≈ 0.82 s.
Next, we can find the height of the roof by calculating the displacement of the rock during the upward motion. Using the equation:
y = vi * t + (1/2) * a * t^2
y = 8.00 m/s * 0.82 s + (1/2) * (-9.8 m/s^2) * (0.82 s)^2
y ≈ 3.28 m
Therefore, the height of the roof above the ground is approximately 3.28 meters. However, this is only the height reached by the rock during its upward motion. To find the total height of the roof, we need to add the height of the roof to this value. Without additional information about the height of the roof, we cannot determine the exact answer. Therefore, none of the given options (a), (b), (c), or (d) can be confirmed as the correct answer.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
a. A novelty clock has a 0.0100−kg-mass object bouncing on a spring that has a force constant of 1.3 N/m. What is the maximum velocity of the object if the object bounces 3.00 cm above and below its equilibrium position? v
max = m/s
b. How many joules of kinetic energy does the object have at its maximum velocity? KE
max =
A The maximum velocity of the object is 1.08 m/s, b The object has 0.00658 joules of kinetic energy at its maximum velocity.
a. To find the maximum velocity of the object, we can use the principle of conservation of mechanical energy.
At the maximum displacement of 3.00 cm above and below the equilibrium position, all the potential energy of the system is converted into kinetic energy.
The potential energy of the system is given by the formula:
PE = (1/2)kx^2
where k is the force constant of the spring and x is the displacement from the equilibrium position.
In this case, x = 3.00 cm = 0.03 m, and k = 1.3 N/m.
PE = [tex](1/2)(1.3 N/m)(0.03 m)^2[/tex]
= 0.000585 J
Since all the potential energy is converted into kinetic energy at the maximum displacement, the kinetic energy at the maximum velocity is equal to the potential energy:
[tex]KE_{max[/tex] = PE = 0.000585 J
b. The kinetic energy (KE) of an object is given by the formula:
KE = (1/2)[tex]mv^2[/tex]
where m is the mass of the object and v is its velocity.
In this case, m = 0.0100 kg (given) and we need to find v_max.
Using the principle of conservation of mechanical energy, we can equate the kinetic energy at the maximum velocity to the potential energy:
[tex]KE_{max[/tex] = PE = 0.000585 J
Substituting the values:
(1/2)(0.0100 kg)[tex]v_{max^2[/tex] = 0.000585 J
Simplifying the equation:
[tex]v_{max^2[/tex] = (2)(0.000585 J) / 0.0100 kg
[tex]v_{max^2[/tex] = 0.0117 J / 0.0100 kg
[tex]v_{max^2[/tex] = 1.17 [tex]m^2/s^2[/tex]
Taking the square root of both sides:
[tex]v_{max[/tex] = √(1.17 [tex]m^2/s^2[/tex])
[tex]v_{max[/tex] ≈ 1.08 m/s
The maximum velocity of the object is approximately 1.08 m/s.
b. The object's kinetic energy at its maximum velocity is given by:
[tex]KE_{max[/tex] = [tex](1/2)(0.0100 kg)(1.08 m/s)^2[/tex]
= (1/2)(0.0100 kg)(1.1664 [tex]m^2/s^2[/tex])
≈ 0.00658 J
The object has 0.00658 joules of kinetic energy at its maximum velocity.
To know more about maximum velocity refer here
https://brainly.com/question/30763982#
#SPJ11
A 28.1 kg object takes 10.3 s to stop from an initial speed of 8.4 m/s. What is the magnitude of the impulse on this object (in N-s)?
The magnitude of the impulse on the object is 235.44 N-s by using the impulse-momentum principle.
To find the magnitude of the impulse on an object, we can use the impulse-momentum principle, which states that the impulse is equal to the change in momentum of the object. The impulse is given by the formula:
Impulse = Change in momentum
The momentum of an object is given by the product of its mass and velocity:
Momentum = mass * velocity
In this case, the object starts with an initial speed of 8.4 m/s and comes to a stop, so its final velocity is 0 m/s. Therefore, the change in momentum is:
Change in momentum = (final momentum) - (initial momentum)
Since the final momentum is zero, we only need to calculate the initial momentum. The initial momentum is given by:
Initial momentum = mass * initial velocity
Plugging in the values:
Initial momentum = 28.1 kg * 8.4 m/s
Now, we can calculate the magnitude of the impulse:
Impulse = Change in momentum = Initial momentum
Impulse = 28.1 kg * 8.4 m/s
Therefore, the magnitude of the impulse on the object is 235.44 N-s.
Learn more about impulse
https://brainly.com/question/30395939
#SPJ11
us eted eted leted PM End Da 11:59:00 PM (7%) Problem 6: Suppose a particle called a kaon is created by cosmic radiation striking the atmosphere. Randomized Variables c=0.84c 1=1.175 x 10-8 s It moves by you at 0.84c, and it lives 1.175 x 10s when at rest relative to an observer. How long does it live, in seconds, as you observe it? dr Grade Summary Deductions (94 Potential 100% Late Work 50% sin() cos() ( Late Potential 50% tan() acos() B cotan() asin) Submissions atan() acotan() sinh() 7 89 4 5 6 123 + C 0 D VOACAC CULLE Atempts remaining 40 ( per attemp cosh() cotanh() detailed view tanh) Degrees O Radians: Submit Hint I give up! Hints: 0% deduction per hint. Hints remaining: 2 Feedback: dedaction per feedback.
As you observe it, the kaon particle will live for approximately 7.05 x 10^-9 seconds, accounting for time dilation due to its velocity of 0.84c.
To determine how long the kaon lives as you observe it, we need to account for time dilation, which occurs due to the relative velocity between the observer (you) and the kaon.
According to time dilation, the observed lifetime (t') of the kaon is related to its rest lifetime (t) by the equation:
t' = t / γ
where γ is the Lorentz factor given by:
γ = 1 / √(1 - (v/c)^2)
In this case, the relative velocity v is 0.84c.
Calculating γ:
γ = 1 / √(1 - (0.84c/c)^2)
= 1 / √(1 - 0.84^2)
≈ 1.666
Now, we can calculate the observed lifetime (t'):
t' = (1.175 x 10^-8 s) / 1.666
≈ 7.05 x 10^-9 s
Therefore, as you observe it, the kaon particle will live for approximately 7.05 x 10^-9 seconds.
To learn more about time dilation due to its velocity, Click here:
https://brainly.com/question/30300115
#SPJ11
An electric motor on an airplane operates on 36 volts and draws a current of 10 amperes. a. What is the power consumption of the motor? b. How much energy does the motor use during a 1 hour flight? hour is 3600 seconds)
The power consumption of a. the motor is 360 watts. b. The motor uses 1.296 x 10⁶ joules of energy during a 1-hour flight.
a. The power consumption of an electrical device can be calculated using the formula P = V * I, where P is power, V is voltage, and I is current.
Substituting the given values, we have P = 36 volts * 10 amperes = 360 watts.
Therefore, the power consumption of the motor is 360 watts.
b. Energy can be calculated by multiplying power by time. In this case, the power consumption of the motor is 360 watts, and the flight duration is 1 hour, which is equivalent to 3600 seconds.
Therefore, the energy used by the motor during the flight is
E = P * t = 360 watts * 3600 seconds
= 1.296 x 10⁶ joules.
Thus, the motor consumes 360 watts of power and uses 1.296 x 10⁶ joules of energy during a 1-hour flight.
To know more about power consumption, refer here:
https://brainly.com/question/30122759#
#SPJ11
2. Whena 2.00 N force is applied to a spring, it stretches a distance of 0.0800 m. When a 1.20 kg mass is suspended from the spring and set into motion, it undergoes simple harmonic motion. How many oscillations will the mass make in 5.00 s ?
The mass will make approximately 6.44 oscillations in 5.00 seconds.
To determine the number of oscillations the mass will make in 5.00 seconds, we need to know the period of the oscillation. The period can be calculated using the formula T = 2π√(m/k), where T is the period, m is the mass, and k is the spring constant.
Given that the force applied to the spring is 2.00 N and it stretches a distance of 0.0800 m, we can use Hooke's law (F = kx) to find the spring constant: k = F/x = 2.00 N / 0.0800 m = 25 N/m.
The mass of the object is 1.20 kg.
Now, we can substitute the values into the period formula:
T = 2π√(m/k) = 2π√(1.20 kg / 25 N/m) = 2π√(0.048 kg/N) ≈ 0.776 s.
The number of oscillations in 5.00 seconds can be calculated by dividing the total time by the period:
Number of oscillations = 5.00 s / 0.776 s ≈ 6.44 oscillations.
To know more about oscillations refer to-
https://brainly.com/question/30111348
#SPJ11
Problem 8: An object is 30 cm in front of a concave spherical mirror that has a focal length of 10 cm. a. What are the image distance q and magnification M? Is the image virtual or real? Is the image Inverted or upright? b. Repeat the same calculation for image distance q, magnification M for a convex mirror. Is the image virtual or real? Is the image inverted or upright?
For concave spherical mirror ,the image is real as it is formed on the other side of the mirror.
For a convex mirror, the image is virtual as it is formed on the same side of the mirror.
a) Object distance u = -30 cm
Focal length of the mirror f = -10 cm .
The mirror is concave, Hence the focal length is negative.
Using the mirror formula,
1/f = 1/u + 1/v
= 1/-10 + 1/-30 = -1/5.
The image distance v is,
1/f = 1/u + 1/v
1/v = 1/f - 1/u= -1/5.
The magnification is,
M = v/u = (-1/5)/(-30) = 1/150.
The negative value of magnification indicates that the image is inverted.The magnification value is less than one, which indicates that the image is smaller in size than the object.The image is real as it is formed on the other side of the mirror. Thus, the image distance is negative.
b) Object distance u = -30 cm
Focal length of the mirror f = 10 cm.
The mirror is convex, Hence the focal length is positive.
Using the mirror formula,
1/f = 1/u + 1/v
= 1/10 + 1/-30 = 1/15.
The image distance v is,
1/f = 1/u + 1/v
1/v = 1/f - 1/u= 1/15 + 1/30= 1/10.
The magnification is, M = v/u = (1/10)/(-30) = -1/300.
The negative value of magnification indicates that the image is upright.The magnification value is less than one, which indicates that the image is smaller in size than the object.The image is virtual as it is formed on the same side of the mirror. Thus, the image distance is positive.
For more such questions on mirror , visit:
https://brainly.com/question/1126858
#SPJ8
What is the charge per unit area in C/m2, of an infinite plane sheet of charge if the electric field produced by the sheet of charge has magnitude 3.0 N/C?
The charge per unit area of the infinite plane sheet of charge is approximately 26.55 x 10⁻¹² C/m².
The charge per unit area of an infinite plane sheet of charge can be determined using the formula:
σ = ε₀× E
where σ is the charge per unit area (in C/m²),
ε₀ is the vacuum permittivity (ε₀ = 8.85 x 10⁻¹²) C²/(N·m²)),
and E is the magnitude of the electric field (in N/C).
In this case, we are given that the electric field produced by the sheet of charge has a magnitude of 3.0 N/C.
Substitute this value into the formula to find the charge per unit area:
σ = ε₀ × E
σ = (8.85 x 10⁻¹² C²/(N·m²)) × 3.0 N/C
Performing the calculation:
σ = 8.85 x 10⁻¹² C²/(N·m²) × 3.0 N/C
σ = 26.55 x 10⁻¹² C/(N·m²)
Learn more about charge -
brainly.com/question/2373424
#SPJ11
Assume that the stars in a stellar disk move on circular orbits about the centre of the galaxy. Derive a relation between the velocity of the stars and the mass inside the radius of the orbit. The observed velocity is determined to be constant, independent of the radius of the orbit. What do you deduce about the mass distribution in the galaxy? What do such observations tell us about the total mass of spiral galaxies?
A relation between the velocity of the stars and the mass inside the radius of the orbit is [tex]v^2 = G * M / r[/tex]. The mass enclosed by each orbit is proportional to the square of the orbit radius.The total mass of spiral galaxies is larger than what is accounted for by the visible stars alone.
In a stellar disk, the gravitational force between the stars and the mass inside their orbit determines their velocities. According to Newton's law of gravitation, the force of gravity is given by the equation
[tex]F = G * (M * m) / r^2[/tex],
where G is the gravitational constant, M is the mass inside the orbit, m is the mass of a star, and r is the radius of the orbit.
As the stars move on circular orbits, the centripetal force required to keep them in orbit is provided by gravity. This centripetal force is given by
[tex]F = m * v^2 / r[/tex],
where v is the velocity of the stars. Equating the two expressions for force:
[tex]G * (M * m) / r^2 = m * v^2 / r[/tex].
Canceling out the mass of the star (m) from both sides and rearranging the equation,
[tex]v^2 = G * M / r[/tex].
This equation reveals that the velocity of the stars is proportional to the square root of the mass inside the orbit divided by the radius of the orbit.
Since the observed velocity is constant, it implies that the square root of the mass inside the orbit divided by the radius of the orbit is constant as well. Therefore, the mass distribution in the galaxy follows a specific pattern, where the mass enclosed by each orbit is proportional to the square of the orbit radius.
This observation allows to infer that there is more mass concentrated toward the center of the galaxy, contributing to a higher mass inside smaller orbits. Additionally, this implies that the total mass of spiral galaxies is larger than what is accounted for by the visible stars alone, suggesting the presence of dark matter.
Learn more about gravitational force here:
https://brainly.com/question/32609171
#SPJ11
Circuit 1: Lights are ON for 3 seconds and OFF for 5 seconds Circuit 2: Lights are ON for 2 seconds and OFF for 6 seconds 10 seconds ago, both sets of lights went ON at exactly the same time. in How many seconds from now will both sets of lights go OFF at the same time? 1.5 POINTS 30 45 60 75 they will never go OFF at the same time
45 seconds from now will both sets of lights go OFF at the same time
To calculate the amount of time it will take for both sets of lights to go OFF at the same time, you need to find the Least Common Multiple (LCM) of the two periods of time.
This is because the LCM is the smallest time period in which both lights will turn on at the same time and also turn off at the same time. Circuit 1: Lights are ON for 3 seconds and OFF for 5 seconds.
period of time for circuit 1 is 3 + 5 = 8 seconds. Circuit 2: Lights are ON for 2 seconds and OFF for 6 seconds.
The period of time for circuit 2 is 2 + 6 = 8 seconds. Now, we need to find the LCM of 8 seconds, which is 8.
Therefore, the time period in which both sets of lights will go OFF at the same time is 8 seconds from the time they both went ON at exactly the same time 10 seconds ago.
This means that they will go OFF at the same time 2 seconds from now, which is 10 seconds + 8 seconds = 18 seconds. The answer is 18 seconds. Hence, the correct option is 45.
FOr more questions on circuit
https://brainly.com/question/30156620
#SPJ8
A 0.270-kg block resting on a frictionless, horizontal surface is attached to a spring whose force constant is 83.8 N/m as in the figure below. A horizontal force F vector causes the spring to stretch a distance of 4.44 cm from its equilibrium position. Find the magnitude of F vector. What is the total energy stored in the system when the spring is stretched? Find the magnitude of the acceleration of the block immediately after the applied force is removed. Find the speed of the block when it first reaches the equilibrium position. If the surface is not frictionless but the block still reaches the equilibrium position, would your answer to part (d) be larger or smaller? larger smaller There is not enough information to answer. What other information would you need to know to find the actual answer to part (d) in this case? What is the largest value of the coefficient of friction that would allow the block to reach the equilibrium position?
The magnitude of the force F vector is approximately 3.72 N, the displacement of the spring is 0.0444m and potential energy stored is 0.0416 J. The magnitude of the acceleration of the block immediately after the applied force is removed is approximately 8.06 m/s^2.
To find the magnitude of the force F vector, we can use Hooke's Law, which states that the force exerted by a spring is proportional to the displacement from its equilibrium position.
F = -kx
Where F is the force exerted by the spring, k is the force constant of the spring, and x is the displacement from the equilibrium position.
Mass of the block (m) = 0.270 kg
Force constant of the spring (k) = 83.8 N/m
Displacement of the spring (x) = 4.44 cm = 0.0444 m
Using Hooke's Law, we can calculate the magnitude of the force F vector:
F = -kx
F = -83.8 N/m * 0.0444 m
F ≈ -3.72 N
The magnitude of the force F vector is approximately 3.72 N.
To find the total energy stored in the system when the spring is stretched, we can use the formula for potential energy stored in a spring:
Potential Energy = (1/2) kx^2
Potential Energy = (1/2) * 83.8 N/m * (0.0444 m)^2
Potential Energy ≈ 0.0416 J
The total energy stored in the system when the spring is stretched is approximately 0.0416 Joules.
When the applied force is removed, the block will undergo simple harmonic motion. The magnitude of the acceleration of the block at any point during simple harmonic motion can be given by:
a = ω^2 * x
Where ω is the angular frequency of the motion and can be calculated using ω = sqrt(k/m).
Force constant of the spring (k) = 83.8 N/m
Mass of the block (m) = 0.270 kg
ω = sqrt(83.8 N/m / 0.270 kg)
ω ≈ 14.28 rad/s
Now, we can calculate the magnitude of the acceleration of the block immediately after the applied force is removed:
a = ω^2 * x
a = (14.28 rad/s)^2 * 0.0444 m
a ≈ 8.06 m/s^2
To know more about spring constant, click here:-
https://brainly.com/question/29975736
#SPJ11
Evaluate the magnitude of the net magnetic force on a current loop of l
1
=2.7R,l
2
=9.6R, and r=7R in an external magnetic field
B
=4.1B
o
(−
j
^
) in terms of B
o
RI. Express your answer using two decimal places. Please note that a current of 3I runs on the wire.
The magnitude of the net magnetic force on a current loop is given by the formula:
F=BIl SinθThe current is 3I, so I = 3I.
The radius of the loop is r = 7R.
The length of the wire is l1 = 2.7R and l2 = 9.6R
The total length of the wire is L = l1 + l2 = 2.7R + 9.6R = 12.3R
The wire is in a magnetic field of B = 4.1Bo(-j) .
Thus, the magnitude of the net magnetic force on a current loop is given by:
F = BIL Sinθ
The current I = 3I
The length of the wire L = 12.3R
The magnitude of the magnetic field
B = 4.1Bo (-j)
F = BIL Sinθ = 4.1Bo (-j) × 3I × 12.3R × sin 90° = 15.15BI R
(Answer)
Therefore, the magnitude of the net magnetic force on a current loop of l1 = 2.7R, l2 = 9.6R, and r = 7R in an external magnetic field B = 4.1Bo (-j) in terms of Bo IR is 15.15.
To know more about magnetic visit :
https://brainly.com/question/13026686
#SPJ11
3 bulbs are in series and the same 3 bulbs are in parallel with
the same battery. Which battery will run out faster?
A. Parallel
B. Series
C. The same
D. Not enough info
When three bulbs are in series and the same three bulbs are in parallel with the same battery, the battery in the parallel circuit will run out faster. The correct option is A.
What are series and parallel circuits?A series circuit is a type of circuit in which there is just one path for current to flow. Components in a series circuit are connected in a sequential manner, such that the current flows through one component before moving on to the next.
Parallel circuit, on the other hand, has multiple paths for the current to flow. Components in a parallel circuit are connected such that each component is connected across the same voltage.
A battery will run out faster in the parallel circuit than in the series circuit because in the parallel circuit, the bulbs will have more current running through them than they do in the series circuit. This is due to the fact that in the parallel circuit, each bulb receives the full voltage from the battery, and the total current is divided among the bulbs. So, as more bulbs are added to the parallel circuit, the total current through the circuit increases, resulting in a quicker depletion of the battery.
To know more about series and parallel circuits, refer to the link below:
https://brainly.com/question/14997346#
#SPJ11
i need a well detail explanation on silicon based qubits.
Silicon-based qubits utilize individual electron spins or dopant atoms in silicon substrates for quantum computing. They offer long coherence times, compatibility with silicon technology, and potential integration with classical electronics. Challenges include achieving strong qubit-qubit interactions.
Silicon-based qubits are a promising approach to quantum computing that utilize the unique properties of silicon to encode and manipulate quantum information. Silicon is a widely used material in the semiconductor industry and has well-established fabrication techniques, making it an attractive candidate for qubit implementation.
In silicon-based qubits, the fundamental building blocks are typically individual electron spins or the quantum states of individual dopant atoms embedded in a silicon substrate. These qubits rely on the manipulation of electron spins, which can be controlled and measured using electrical and magnetic fields.
One of the key advantages of silicon-based qubits is the long coherence times that can be achieved. Silicon has a low level of background noise and interacts less with its environment, resulting in better preservation of quantum states. This property is crucial for maintaining the delicate quantum superposition and entanglement required for quantum computation.
Moreover, silicon-based qubits can benefit from the extensive knowledge and infrastructure developed for silicon technology. Silicon wafers can be precisely engineered, and existing fabrication processes can be adapted for qubit fabrication. This compatibility with established manufacturing techniques paves the way for scalable and cost-effective production of quantum devices.
Additional, silicon-based qubits hold the potential for integration with classical electronic components. This integration could enable the development of hybrid systems that combine classical computing with quantum processing, offering enhanced computational capabilities.
Despite these advantages, silicon-based qubits also face challenges. One significant challenge is achieving strong and reliable qubit-qubit interactions, as this is essential for performing quantum gate operations. Various techniques, such as coupling through quantum dots or superconducting resonators, are being explored to address this challenge.
In summary, silicon-based qubits offer several advantages for quantum computing, including long coherence times, compatibility with existing silicon technology, and potential integration with classical electronics. Continued research and development in this field are expected to advance the performance and scalability of silicon-based qubits, bringing us closer to realizing practical quantum computers.
To learn more about Silicon, click here: https://brainly.com/question/28213172
#SPJ11
A box rests on a frozen pond, which serves as a frictionless horizontal surface. A fisherman applies a force with a magnitude of 480 N at an angle of 45 to the horizontal produces an acceleration of 30.0 m/s , what is the mass of the box?
In order to find the mass of the box, we need to apply Newton's second law of motion which states that the force acting on an object is equal to its mass times its acceleration.
That is,
F = ma
Where F is the force acting on the object,
m is the mass of the object,
a is the acceleration produced by the force.
Now we can find the mass of the box using the given values.
The force applied is 480 N at an angle of 45 to the horizontal, which means that the horizontal component of the force is given by:
Fx = F cos θ = 480 cos 45° = 480 × 0.7071 = 339.4 N
The vertical component of the force is given by:
Fy = F sin θ = 480 sin 45° = 480 × 0.7071 = 339.4 N
The force acting on the box is only in the horizontal direction,
and there is no friction on the surface, so the net force acting on the box is simply the force applied.
That is,
Fnet = Fx = 339.4 N
The acceleration produced by the force is given as 30.0 m/s².
So we have:
a = Fnet / m30 = 339.4 / mm = 339.4 / 30m = 11.3 kg
the mass of the box is 11.3 kg.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ11
Which of the following is not true regarding the cerebellum? O It is separated from other structures by the Falx cerebelli The hemispheres are connected by a thick bundles of nerve fibers called the corpus collosum O It has a surface cortex of gray matter and a deeper layer of white matter O It contains over 50% of the brain's neurons O It is the largest region of the brain
The given statement "It is the largest region of the brain" is not true for the cerebellum.
The cerebellum is a distinct structure located at the posterior part of the brain, beneath the occipital lobes. While it is a significant structure, it is not the largest region of the brain.
The cerebrum, which includes the cerebral hemispheres, is the largest region of the brain. It is responsible for higher cognitive functions such as memory, thinking, and sensory processing.
The other statements provided are generally true regarding the cerebellum:
The cerebellum is separated from other structures by the Falx cerebelli, which is a fold of dura mater that helps to separate the cerebellum from the cerebrum.
The cerebellum has a surface cortex that has gray matter and a deeper layer of white matter. The gray matter is densely packed with neuronal cell bodies, while the white matter consists of nerve fibers.
The cerebellum does contain a significant number of neurons, accounting for over 50% of the brain's total neurons.
The cerebellar hemispheres is connected by a thick bundle of nerve fibers called the corpus callosum. However, it should be noted that the corpus callosum primarily connects the two cerebral hemispheres, not the cerebellar hemispheres.
In summary, the incorrect statement is that the cerebellum is the largest region of the brain.
To learn more about cerebellum, refer to the link:
https://brainly.com/question/15006100
#SPJ4
A sateilite is orbiting the earth just above its surface. The centripetal force making the satellite follow a circular trajectory is ust its weight, so its centripetal zeceleration is about 9.81 m s
2
. (the icceleration due to gravity near the earth's surface). If the earth's radius W about 6360 km, how Rast must the satellite be mowinn?How long will it takie for the satelife to complete one trip around this earth? A satellite is orbiting the earth just above its surface. The centripetai force making the satellite follow a circular trajectory tis justits Weight, so its centripetal acceleration is about 981 m/s
2
(the acceleration due to fravity near the earth's surfacel if the earth's rodius is about 6360 km, how tast must the satelike be movins? How long wilit take for the sataliite to complete one trip around the earti??
The satellite must be moving at a speed of about 7,905.52 m/s and its height from the surface of the earth should be about 42,155.59 m. The time taken by the satellite to complete one trip around the earth is about 50.78 minutes.
Centripetal acceleration, a = 9.81 m/s²Radius of the earth, R = 6360 km = 6,360,000 m.
Let the distance of the satellite from the center of the earth be r.
Time taken by the satellite to complete one revolution around the earth is given by:T = 2πr/v Where v is the velocity of the satellite.
Now, we know that the centripetal force acting on a body moving in a circular path is given by:F = m × a Where m is the mass of the body.
Further, we know that the gravitational force acting on a body of mass m near the surface of the earth is given by:F = m × gWhere g is the acceleration due to gravity near the surface of the earth.
Substituting the value of F in the expression of centripetal force, we get:m × g = m × ar = R + h Where h is the height of the satellite above the surface of the earth.
Substituting the value of a and simplifying, we get:h = 42,155.59 m.
Time taken by the satellite to complete one revolution around the earth is given by:T = 2πr/v.
The velocity of the satellite can be calculated as follows:
From the above equation, we get:v = √(GM/R) Where G is the universal gravitational constant and M is the mass of the earth.
Substituting the values, we get:v = 7,905.52 m/s.
Now, the distance traveled by the satellite in one revolution is equal to the circumference of the circle with radius r, i.e.C = 2πr.
Substituting the values, we get:C = 4,01,070.41 m.
Time taken by the satellite to complete one revolution around the earth is given by:T = C/vSubstituting the values, we get:T = 50.78 minutes.
Therefore, the satellite must be moving at a speed of about 7,905.52 m/s and its height from the surface of the earth should be about 42,155.59 m. The time taken by the satellite to complete one trip around the earth is about 50.78 minutes.
Learn more about gravitational force here ;
https://brainly.com/question/32609171
#SPJ11
Predicting low-latitude scintillation is a difficult problem
that has been researched for several decades. Give a reason why it
is difficult to predict scintillation and suggest how it could be
addres
Predicting low-latitude scintillation is difficult due to its complex nature, influenced by a combination of factors such as ionospheric irregularities, solar activity, and geomagnetic disturbances.
Low-latitude scintillation refers to the rapid fluctuations in the amplitude and phase of radio signals passing through the Earth's ionosphere in regions closer to the equator. It is challenging to predict scintillation accurately because it involves a complex interplay of various factors.
One of the main reasons for the difficulty is the presence of ionospheric irregularities. These irregularities are caused by the interaction between the solar wind and the Earth's magnetosphere, leading to the formation of plasma density structures in the ionosphere. These structures can cause signal distortions and scintillation. However, these irregularities are highly dynamic and difficult to model accurately, making it challenging to predict their occurrence and characteristics.
To address the difficulty of predicting low-latitude scintillation, a multi-disciplinary approach is required. This involves combining data from various sources such as ground-based and satellite observations, ionospheric modeling, and space weather monitoring. By improving our understanding of ionospheric physics, developing advanced modeling techniques, and integrating real-time observations, scientists can work towards improving the prediction of low-latitude scintillation events.
In summary, predicting low-latitude scintillation is challenging due to the complex nature of ionospheric irregularities and the influence of solar activity and geomagnetic disturbances. Addressing this challenge requires a multi-disciplinary approach and advancements in observational techniques and modeling methods.
Learn more about amplitude from the given link:
https://brainly.com/question/9525052
#SPJ11.
Three identical metallic spherical objects have individual charges of, q1 = -9.612 nC, q2 = +3.204 nC and q3 = +6.408 nC. If the three objects are brought into contact with each other at the same time and the separated, determine: a) the final net charge on q1 = __________ nC; b) the final net charge on q2 = __________ nC; c) the final net charge on q3 = __________ nC; d) the number of electrons that were removed from/added to q1 = __________ electrons were __________ q1.
Given three identical metallic spherical objects have individual charges of, q1 = -9.612 nC,
q2 = +3.204 nC,
and q3 = +6.408 nC.
If the three objects are brought into contact with each other at the same time and then separated, the final net charge on q1, q2, and q3 will be calculated as follows;
Initial total charge, Q = q1 + q2 + q3
Q= -9.612 nC + 3.204 nC + 6.408 nC
Q= -0.002 nC
The final net charge on q1, q2, and q3 is same as they are identical:
q1 + q2 + q3 = -0.002 nC
q1 = q2 = q3 = -0.002 nC/3
q1 = -0.0006667 nC
Therefore, the final net charge on q1, q2, and q3 is -0.0006667 nC.The charge on q1 before and after is -9.612 nC and -0.0006667 nC respectively. The difference is the number of electrons that were removed from/added to q1. The number of electrons can be calculated as follows;
Charge on an electron,
e = 1.6 ×[tex]10^{-19[/tex] C
Total number of electrons removed from
q1 = [(final charge on q1) - (initial charge on q1)] / e
q1 = [-0.0006667 - (-9.612)] / 1.6 × [tex]10^{-19[/tex]
q1 = 6.0075 × 1013
The number of electrons removed from q1 is 6.0075 × 1013, and electrons were removed from q1. Thus, option d is,
"The number of electrons that were removed from q1 = 6.0075 × 1013 electrons were removed from q1."
To know more about individual visit:
https://brainly.com/question/32647607
#SPJ11
What value of inductance should be used if a 19.6 {k} \Omega reactance is needed at a frequency of 523 {~Hz} ?
Reactance (X) is an opposition of an inductor to a change in the electrical current flowing through it.
An inductor's reactance is directly proportional to its inductance and frequency of operation.
The formula that relates the reactance (X),
frequency (f),
and inductance (L) of an inductor is:
X = 2πfL
where: X is in Ohms (Ω)f is in Hertz (Hz)L is in Henrys (H)
To calculate the value of inductance (L) required for a reactance (X) of 19.6 kΩ at a frequency (f) of 523 Hz, the formula above can be rearranged as:
L = X/2πf
Substituting the given values:
L = 19.6 kΩ / 2π(523 Hz)
L = 19.6 × 10³ / 2π(523)
Henry
L = 19.6 × 10³ / 3285.7
Henry
L = 5.97
Henry (approx.)
the value of inductance that should be used if a reactance of 19.6 kΩ is required at a frequency of 523 Hz is approximately 5.97 Henry.
To know more about opposition visit:
https://brainly.com/question/29134649
#SPJ11
After a 6.12Ω resistor is connected across a battery with a 0.17Ω internal resistance, the electric potential between the physical battery terminals is 4 V. What is the rated emf of the battery? Answer in units of V.
The rated electric potential difference of the battery is 4.177 V which is calculated using the equation emf = IR
The electric potential difference (emf) of a battery is defined as the voltage across it when it is discharging through a resistance. The emf of a battery can be calculated using the equation:
emf = IR
where I is the current flowing through the resistance and R is the resistance of the battery.
In this case, the battery is supplying a current of 0.17 A to a 6.12Ω resistor, so the current through the battery is:
I = V / R = (4 V) / (0.17 Ω) = 226.7 A
The resistance of the battery can be calculated using Ohm's law:
R = V / I = (4 V) / (226.7 A) = 0.001847 Ω
Substituting these values into the emf equation, we get:
emf = IR = (0.001847 Ω) x (226.7 A) = 4.177 V
Therefore, the rated emf of the battery is 4.177 V.
Learn more about potential difference
https://brainly.com/question/24142403
#SPJ11
Mass =?M⊕
Radius =1/2R⊕
Gravity =1 F⊕
• 1/4 x Earth's
• 1/2× Earth's
• 1× Earth's
• 2× Earth's
In the given expressions, M⊕ represents the mass of Earth, R⊕ represents the radius of Earth, and F⊕ represents the gravitational force on Earth.
Let's calculate the values based on the provided ratios:
1/4 x Earth's:
If we consider 1/4 x Earth's mass, the mass would be:
Mass = (1/4) x M⊕
1/2 × Earth's:
If we consider 1/2 × Earth's mass, the mass would be:
Mass = (1/2) x M⊕
1 × Earth's:
If we consider 1 × Earth's mass, the mass would be:
Mass = 1 x M⊕ = M⊕
2 × Earth's:
If we consider 2 × Earth's mass, the mass would be:
Mass = 2 x M⊕
Now, let's calculate the values for radius and gravity based on the given ratios:
Radius = 1/2R⊕:
If we consider 1/2 of Earth's radius, the radius would be:
Radius = (1/2) x R⊕
Gravity = 1 F⊕:
If we consider 1 times the gravitational force on Earth, the gravity would be:
Gravity = 1 x F⊕ = F⊕
To learn more about mass of Earth follow:
https://brainly.com/question/30501849
#SPJ11