A resistor, an inductor, and a capacitor are connected in series to an ac source. What is the condition for resonance to occur?.

As a professional ethics student, analyze five reasons why members of Effutu community act unethically.

They are:

This refers to the moral principles that guide a person's behavior and show their conduct to others and also to themselves.

Hence, we can see that based on the assertion made by the Effutu community members, they ended up justifying unethical behavior and the analysis has been made above.

Read more about ethics here:

https://brainly.com/question/13383200
#SPJ1

Based upon the Von Mises theory, the safety factor for points A and B are 2.77 and 6.22 respectively.

From the diagram of this bar made of AISI 1006 cold-drawn steel shown in the image attached below, we can logically deduce the following parameters:

At point A, the stress is given by this equation:

σx = Mc/I + P/Area

[tex]\sigma_x = \frac{Fl(\frac{d}{2}) }{\frac{\pi d^2}{64} } +\frac{P}{\frac{\pi d^2}{4} } \\\\[/tex]

σx = 32Fl/πd³ + 4P/πd²

Substituting the given parameters into the formula, we have;

σx = 32(550)(0.1)/π(0.02)³ + 4(800)/π(0.02)²

σx = 95.49 MPa.

Next, we would determine the torque:

Mathematically, torque can be calculated by using this formula:

τxy = Tr/J = 16T/πd³

τxy = 16(30)/π(0.02)³

τxy = 19.10 MPa.

From Von Misses theory, we have:

σVM = √(σx² + 3τxy²)

σVM = √(95.49² + 3(19.10)²)

σVM = 101.1 MPa.

Now, we can calculate the safety factor for point A:

n = Sy/σVM

n = 280/101.1

n = 2.77.

At point B, the stress is given by this equation:

σx = 4P/πd²

σx = 4(800)/π(0.02)²

σx = 25.47 MPa.

Next, we would determine the torque:

Mathematically, torque can be calculated by using this formula:

τxy = Tr/J = 16T/πd³ + 4V/3A

τxy = 16(30)/π(0.02)³ + 4(550)/3π(0.02)³

τxy = 21.43 MPa.

From Von Mises theory, we have:

σVM = √(σx² + 3τxy²)

σVM = √(25.47² + 3(21.43)²)

σVM = 45.02 MPa.

Now, we can calculate the safety factor for point B:

n = Sy/σVM

n = 280/45.02

n = 6.22.

Read more on Von Mises theory here: https://brainly.com/question/12976779

#SPJ1

The Steps my friend need to make an ethical decision are:

An ethical decision-making model is known to be a kind of a tool that can be used by a person to help create the ability to think in regards to an ethical dilemma and come to an ethical decision.

Note that Ethical decision-making is one that is dependent on the key character values such as trustworthiness, respect, role, fairness,  and others.

Therefore, The Steps my friend need to make an ethical decision are:

Learn more about ethical decision from

https://brainly.com/question/21105288

#SPJ1

Answer: ………………..

Explanation:???????????????

Answer:

These are the components telecommunication service providers use to run certain operations towards customers.

hope it helps. pls like and follow

Business support systems "provide job-related information support to users at all levels of a company". The correct option is 'a'.

Business support systems (BSS) encompass a combination of functionalities mentioned in the provided options. Let's discuss each option briefly:

a. Provide job-related information support to users at all levels of a company:

This statement aligns with the concept of Decision Support Systems (DSS), which are a type of BSS that aid users in making informed decisions by providing relevant information and analysis. DSS supports various levels of management by assisting them in evaluating alternatives, analyzing data, and generating reports to support decision-making processes.

b. Simulate human reasoning by combining a knowledge base and inference rules that determine how the knowledge is applied:

This description pertains to Expert Systems, which are an advanced form of BSS. Expert Systems utilize a knowledge base and inference rules to imitate human expertise and provide intelligent solutions to complex problems. They are particularly useful in domains where specialized knowledge is required.

c. Process data generated by day-to-day business operations:

This statement refers to Transaction Processing Systems (TPS), which are an essential component of BSS. TPS handles routine, day-to-day transactions and processes data generated during regular business operations, such as sales, inventory, and payroll.

d. Include e-mail, voice mail, fax, video conferencing, word processing, automated calendars, database management, spreadsheets, and integrated mobile computing systems:

These technologies are examples of Office Automation Systems (OAS), another category of BSS. OAS streamline office tasks and improve communication and collaboration among employees through various software tools and applications.

Therefore, business support systems encompass a range of applications and technologies that provide job-related information support.

To learn more about Business support systems;

https://brainly.com/question/31807690

#SPJ3

The complete question:

Business support systems ____.

a. provide job-related information support to users at all levels of a company

b. simulate human reasoning by combining a knowledge base and inference rules that determine how the knowledge is applied

c. process data generated by day-to-day business operations

d. include e-mail, voice mail, fax, video conferencing, word processing, automated calendars, database management, spreadsheets, and integrated mobile computing systems

Answer:

By using a forward-inclined half-moon torch position, stopping momentarily at each end of the weld pool

Explanation:

By using a forward-inclined half-moon torch position, stopping momentarily at each end of the weld pool

Adjusting welding parameters, using appropriate electrode size, and maintaining proper torch angle can prevent undercutting in horizontal

welding of an inside corner.

We have,

When an inside corner is being welded in the horizontal position, undercutting can be decreased or prevented by adjusting the welding parameters, such as:

- Controlling Welding Parameters:

Adjusting the welding parameters is crucial in preventing undercutting.

It involves regulating the welding current, voltage, and travel speed.

- Selecting Appropriate Electrode Size:

Choosing the right electrode size is essential to control the heat generated during the welding process.

Smaller electrode diameters generally provide lower heat input, which can help prevent undercutting.

- Maintaining Proper Torch Angle and Manipulation Techniques:

Keeping the correct torch angle during welding is crucial to control the weld pool and metal deposition.

- reducing the welding current and travel speed

- using the appropriate electrode size

- maintaining proper torch angle and manipulation techniques.

Thus,

Adjusting welding parameters, using appropriate electrode size, and maintaining proper torch angle can prevent undercutting in horizontal welding of an inside corner.

Learn more about welding parameters here:

https://brainly.com/question/29654991

#SPJ7

Answer:

Helps to remove Oxides formed during brazing.

Explanation:

Flux is needed to dissolve and remove oxides that may form during brazing. Prevent or inhibit the formation of oxide during the brazing process

Answer:

Explanation:

It is the voltage a voltmeter would read when connected across something that has resistance.

___________0_________O______O_______

|                                                                               |

|                                              |                                |

|_____________________|  |_____________ |

                                              |

The diagram above is supposed to represent 3 lightbulbs connected in series. The vertical lines in the middle are supposed to be a battery which powers the three light bulbs. If you put a voltmeter across one of the lightbulbs, it will read a voltage that is 1/3 of the voltage of the battery.

Answer

That reading you get across the one light bulb is The Voltage Drop.

Since you have notified the company that they were out of compliance with MS licensing requirement, the next thing to do is to look or ask for the product key that is with the company

The other information would you need is for the company to obtain the product license by buying the product key.

If you get to buy any of the  standard Microsoft Office or other packages that is said to be the Home and Student edition, a person or firm will need a  license.

Note that the license is one that guarantee one the use of the product and its installation.

Therefore You need to purchase a lot of  copies of it and as such, Since you have notified the company that they were out of compliance with MS licensing requirement, the next thing to do is to look or ask for the product key that is with the company

The other information would you need is for the company to obtain the product license by buying the product key.

Learn more about MS licensing requirement from

https://brainly.com/question/14222113

#SPJ1

The relative velocity is defined as the velocity of an object with respect to another observer. It is the time rate of change of relative position of one object with respect to another object.

The relative velocity of A with respect to B= velocity of the body A – velocity of the body B.

The relative velocity formula is expressed as. V → = V A B → + V B C → Where. VAB is the velocity with respect to A and B, VBC is the velocity with respect to B and C and VAC is the velocity with respect to A and C.

To learn more about relative velocity, refer

https://brainly.com/question/17228388

#SPJ9

In the ungrounded electrical circuits or systems, the circuit is one that is not  or do not have the connection to the grounding electrode.

An ungrounded system is known to be defined as a system that is known to be one that do not have an intentional connection to ground, and it has an exception of possibly going through potential indication or other kinds of devices.

Note that The neutral of an ungrounded system is one that is seen to be under reasonably balanced load conditions and thus it is one that is usually near to ground potential.

Hence, In the ungrounded electrical circuits or systems, the circuit is one that is not  or do not have the connection to the grounding electrode.

Learn more about electrical circuits from

https://brainly.com/question/2969220

#SPJ1

The cubic inch space that is required inside a box for 4 #6 XHHN current carrying conductors will be D. 8 cubic inches.

It should be noted that a conductor simply means a substance or material that simply allows electricity to pass through it.

From the information given, the cubic inch space that is required inside a box for 4 #6 XHHN current carrying conductors is yo be computed.

This will be:

= (4 × 6)/3

= 24/3

= 8

In conclusion, the cubic inch space that is required inside a box for 4 #6 XHHN current carrying conductors will be 8 cubic inches.

Learn more about conductor on:

brainly.com/question/11845176

#SPJ1

Answer:

no false

Explanation: all bench are ame current.

Military glorification through mosaics, relief carvings and triumphant arches are often associated with roman architectural monument and is the correct choice.

This can be defined as a structure which is usually large and is used to commemorate the history of an influential person. This helps to serve as an example and also a reminder as to why the performance of good deeds are important

The use of military glorification through mosaics, relief carvings and triumphant arches were also often used by the Romans in other to commemorate war victories and the succession of a new ruler which is known as the emperor.

Read more about Roman monuments here https://brainly.com/question/15786258

#SPJ1

When required to drill holes on a roof that has no power supply the best drill for the job would be a cordless drill.

It should be noted that a power supply is an electrical device which supplies electric power to an electrical load.

In this case, the main purpose of a power supply is simply to be able to convert electric current from the source to the correct current, and frequency.

In this case, the power supply unit converts the main AC to a low-voltage regulated DC power. Therefore, When required to drill holes on a roof that has no power supply the best drill for the job would be a cordless drill.

Learn more about power supply on:

https://brainly.com/question/14510836

#SPJ1

Answer: block o’ metal

Explanation:

The critical buckling load of an ideal column of circular cross section can be reduced by increasing the diameter of the column.

The critical load is known to be that factor that is labeled the greatest load that is one which is unable to cause lateral deflection (buckling).

Note that For loads greater than the critical load, the column will tend to decrease laterally. The critical load is known to be one that puts the column in what we call the state of an unstable form of equilibrium.

The critical buckling load is based  on the shape and dimensions of beam section that is said to have constant cross sectional area.

Hence, The critical buckling load of an ideal column of circular cross section can be reduced by increasing the diameter of the column.

Learn more about ideal column from

https://brainly.com/question/1788884

#SPJ1

Answer:

Im so pretty hahahaha

Explanation:

I can describe myself to you hehehehehe I'm just calm

The potential evidence of childhood fixation that shows up in adult personality is oral fixation. It is the oral fixation that is caused by unmet oral needs. Such kinds of needs can be seen in early childhood.

There are some devices or items that are intended or actually used depending upon their functions or capabilities. One may get other information that is contained in it. Such an item is known as potential evidence.

There is one more way to keep the record of such kind of item, and that is digital. When the evidence is recorded in the digital form, they are stored in the binary form that may be relied on in court. This evidence can be found on a computer hard drive or on a mobile phone.

Thus, it is the oral fixation that has been done in childhood.

Learn more about potential evidence from here:

https://brainly.com/question/4608050

#SPJ2

Answer:

Stainless Steel.

Explanation:

A regulator diaphragm is often made from stainless steel.

We can infer and logically deduce that the color of a boat's sternlight is white.

A sternlight can be defined as a white light that is designed and developed to be placed as closely as possible and practical with the stern shining continuously (constantly).

By default, a sternlight is typically affixed to the boat in such a way that the light will shine out at an angle of 135 degrees (135°) from the back of the boat.

In this context, we can infer and logically deduce that the color of a boat's sternlight is white and it avails sailors and other persons the opportunity of determining and knowing the direction that a boat (vessel) is moving.

Read more on sternlight here: https://brainly.com/question/27999695

#SPJ1

Complete Question:

What color is a boat sternlight?

Both Technician A that says that some manufacturers recommend against breaking the cylinder glaze with a glaze breaker and Tech B that says  Flex-Hone is used to help break the cylinder glaze are right.

Deglazing  can be regarded as the techniques that is been used  on the surface of an engine cylinder which is been  roughened to create friction between the moving parts .

Doing this will now give room for engine oil to grip the sides of the cylinder, hence Both Technician A that says that some manufacturers recommend against breaking the cylinder glaze with a glaze breaker and Tech B that says  Flex-Hone is used to help break the cylinder glaze are right.

Learn more about cylinder on:

https://brainly.com/question/76387

#SPJ1

Answer:

Valvoline™ ZEREX™ Asian Vehicle has been designed to meet the requirements of Asian manufacturers, which specify a silicate free HOAT formula with a phosphate additive to protect their cooling systems from rust and corrosion. Available in both red and blue formulas to better match your Asian vehicle’s specific requirements.

Explanation:

ZEREX Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Toyota , Lexus , Scion and others) requiring a red, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive.

Answer:poat formulation

Explanation:

It is false that a complicated emissions control system would be the only way to lower a rotary engines poor emissions.

Emission control system is developed to reduce emissions and discharge.

They are found in vehicles and other automobile to limit the discharge or release of gases thay are noxious which emit from combustion engine.

To control exhaust emissions, the air-injection system can be used and also, the exhaust gas recirculation (EGR) system can be used to reduce emissions. A high emissions requires high energy control system.

Therefore, It is false that a complicated emissions control system would be the only way to lower a rotary engines poor emissions

Learn more on emission below

https://brainly.com/question/2187993

#SPJ1

pf=cos(thira)

pf=kw/kvar

The power factor of the motor and the amount of capacitance is 195 μF. The amount of capacitance required to correct the power factor to 95%. Thus, option B is correct.

A capacitor has been defined as a device that stores the electric strength in an electric powered discipline by using the virtue of accumulating the electric costs on near surfaces insulated from each other. It's miles a passive digital thing with terminals.

The effect of the capacitor is referred to as capacitance. The capacitor is a part that has the capacity or “ability” to save strength inside the form of an electrical price producing a potential difference (Static Voltage) across its plates, similar to a small rechargeable battery.

Calculation:-

P = 18700

Q₂ = 29049.34

S = 29680

Q₂ = v²ωc

29049.34  = (560)² × ( 2π × 60 )

C = 1.95 × 10⁻⁴

C  = 195 μF

Therefore, The power factor of the motor and the amount of capacitance is 195 μF. The amount of capacitance required to correct the power factor to 95%. Thus, option B is correct.

Learn more about capacitance on:

https://brainly.com/question/28445252

#SPJ2

Answer:al part of question

Explanation:voltage

Disability is extremely diverse. While some health conditions associated with disability result in poor health and extensive health care needs, others do not. However, all people with disability have the same general health care needs as everyone else, and therefore need access to mainstream health care services.

When making a conduit-to-box connection and a bonding wire will be installed, by using a. grounding locknut.

Metallic couplings  can be used for metallic conduit and they can be  secured  with set screws or via compression.

It should be noted that the threaded couplings screw onto couplings that have threaded ends will make it easier.

Nonmetallic couplings can be used for  nonmetallic conduit  which are usually attached with solvent cement, hence When making a conduit-to-box connection and a bonding wire will be installed, by using a. grounding locknut.

Learn more about bonding wire  on:

https://brainly.com/question/3753070

#SPJ1

Explanation:

HP to torque (Nm) Calculation:

Torque T(Nm) in Newton meter (Nm) is equal to the 746 times of power P(HP) in horsepower divided by the 0.105 times of the motor speed N(rpm) in RPM. In another short word, 7127 times of horsepower divided by the motor speed is equal to motor torque.

One of the solutions that can help to reduce fraudulent conduct by those in power is to hold them accountable.

This refers to the process through which an area or region experiences growth and improvement in terms of infrastructure and general well-being.

Hence, we can see that some of the effects of dishonest or fraudulent conduct by those in power are:

Read more about development here:

https://brainly.com/question/11352260

#SPJ1

Answer: D

Explanation: did it on edge