A process gas cylinder sits on a programmable scale. The cylinder weighs 500 lbs empty, and 700 lbs when full of gas. In order to keep the cylinder from running dry, you need to set 2 alarms of scale: a warning for when the gas is 80% gone, and a fault for when the gas is 90% gone. What set points would you enter on the scale for the warning and fault values?

Answers

Answer 1

By setting the warning set point to 660 lbs and the fault set point to 680 lbs, you can ensure that the scale will trigger a warning when the gas is 80% gone and a fault when the gas is 90% gone, based on the weights of the cylinder.

To determine the set points for the warning and fault values on the scale, we need to calculate the weights corresponding to 80% and 90% of the total gas in the cylinder.

Given that the cylinder weighs 500 lbs when empty and 700 lbs when full, the total weight of the gas in the cylinder is:

Total Gas Weight = Full Weight - Empty Weight

                = 700 lbs - 500 lbs

                = 200 lbs

To find the warning set point, which corresponds to 80% of the total gas, we calculate:

Warning Set Point = Empty Weight + (0.8 * Total Gas Weight)

                 = 500 lbs + (0.8 * 200 lbs)

                 = 500 lbs + 160 lbs

                 = 660 lbs

Therefore, the warning set point on the scale should be set to 660 lbs.

Similarly, to find the fault set point, which corresponds to 90% of the total gas, we calculate:

Fault Set Point = Empty Weight + (0.9 * Total Gas Weight)

               = 500 lbs + (0.9 * 200 lbs)

               = 500 lbs + 180 lbs

               = 680 lbs

Therefore, the fault set point on the scale should be set to 680 lbs.

By setting the warning set point to 660 lbs and the fault set point to 680 lbs, you can ensure that the scale will trigger a warning when the gas is 80% gone and a fault when the gas is 90% gone, based on the weights of the cylinder.

To learn more about fault values   click here:

brainly.com/question/14466952

#SPJ11


Related Questions

What is the B-bit two's complement for the following integer?
-63

Answers

The 8-bit two's complement representation of -63 is 11000001. To find the B-bit two's complement representation of -63, we need to consider the binary representation of -63 and perform the two's complement operation.

First, we convert -63 to its binary representation. Since -63 is a negative number, we can represent it in binary using the sign-magnitude notation. The binary representation of 63 is 00111111.

Next, to obtain the two's complement representation, we need to invert all the bits (change 0s to 1s and 1s to 0s) and add 1 to the resulting value.

In this case, we invert all the bits of 00111111, which gives us 11000000. Then, we add 1 to the inverted value, resulting in 11000001.

The B-bit two's complement representation depends on the value of B, which represents the number of bits used for the representation. In this case, since we are dealing with -63, the B-bit two's complement representation would be 8 bits.

Therefore, the 8-bit two's complement representation of -63 is 11000001.

Learn more about binary here:

https://brainly.com/question/32721079

#SPJ11

given the following data for a c chart: random sample number 1234 number of nonconforming items 201930 31 sample size 5,000 5,000 5,000 5,000.

what is the upper control limit gor C chart using +- 3 sigma
a. 0.0200
b. 0.0500
c. 40.0000
d. 28.0000
e. 15.0000

Answers

Random sample number 1234, number of nonconforming items 2019,30, 31, and sample size 5,000, 5,000, 5,000, 5,000. We need to calculate the upper control limit for C chart using +3 Sigma.The option is d. 28.0000.

Given that C chart is a type of control chart that is used to monitor the count of defects or nonconformities in a sample. The formula to calculate the Upper Control Limit (UCL) for a C chart is as follows: $$U C L=C+3 \sqrt{C}$$where C

= average number of nonconforming units per sample.

Given that the average number of nonconforming units per sample is C = (2019+30+31) / 3

= 6933 / 3

= 2311.The sample size is 5,000, 5,000, 5,000, 5,000. Therefore, the total number of samples is 4 * 5,000

= 20,000.The count of nonconforming items is 2019, 30, 31. Therefore, the total number of nonconforming units is 2,019 + 30 + 31

= 2,080.The formula for Standard Deviation (σ) is as follows:$$\sigma=\sqrt{\frac{C}{n}}$$where n

= sample size.Plugging in the values, we get,$$\sigma

=\sqrt{\frac{2311}{5,000}}

= 0.1023$$

Therefore, the UCL for C chart is:$$U C L=C+3 \sqrt{C}

= 2311 + 3 * 0.1023 * \sqrt{2311}

= 28$$Thus, the upper control limit for C chart using +3 Sigma is d. 28.0000.

To know more about number, visit:

https://brainly.com/question/24908711

#SPJ11

A tourist purchases a car in England and ships it home to the United States. The car sticker advertised that the car's fuel consumption was at the rate of 40 miles per gallon on the open road. The tourist does not realize that the U.K. gallon differs from the U.S. gallon: 1 U.K. gallon =4.5459631 liters 1 U.S. gallon =3.7853060 liters For atrip of 747 miles (in the United States), how many gallons of fuel does (a) the mistaken tourist believe she needs and (b) the car actually require? (a) Number Units (b) Number Units

Answers

The mistaken tourist believes she needs 18.675 US gallons, and the car actually requires 621.128 US gallons.

A tourist purchases a car in England and ships it home to the United States. The car sticker advertised that the car's fuel consumption was at the rate of 40 miles per gallon on the open road. The tourist does not realize that the U.K. gallon differs from the U.S. gallon: 1 U.K. gallon =4.5459631 liters 1 U.S. gallon =3.7853060 liters The conversion factor for UK gallons to US gallons is: 1 UK gallon / 1.20095 US gallonsa) The number of gallons of fuel that the mistaken tourist believes she needs to cover a trip of 747 miles can be calculated as follows:40 miles per UK gallon = 40/1.20095 miles per US gallonNumber of gallons of fuel required = 747/40 = 18.675, so the tourist believes she needs 18.675 US gallons. b) The number of gallons of fuel the car actually requires to cover a trip of 747 miles can be calculated as follows:1 mile per 40 miles per UK gallon = 1 mile per 1.20095 miles per US gallonNumber of gallons of fuel required = 747/1.20095 = 621.128, so the car actually requires 621.128 US gallons.

To know more about number, visit:

https://brainly.com/question/3589540

#SPJ11

Suppose that the line ℓ is represented by r(t)=⟨10+2t,14+6t,5+2t⟩ and the plane P is represented by 2x−2y+5z=12
Find the intersection of the line ℓ and the plane P. Write your answer as a point (a,b,c) where a,b, and c are numbers.

Answers

The intersection of the line ℓ and the plane P is the point (5, -1, 0). To find the intersection of the line ℓ and the plane P, we need to substitute the coordinates of the line into the equation of the plane and solve for t.

The equation of the plane P is 2x - 2y + 5z = 12.

Substituting the coordinates of the line ℓ into the equation of the plane, we have:

2(10 + 2t) - 2(14 + 6t) + 5(5 + 2t) = 12.

Simplifying the equation:

20 + 4t - 28 - 12t + 25 + 10t = 12,

-12t + 4t + 10t + 20 - 28 + 25 = 12,

2t + 17 = 12,

2t = 12 - 17,

2t = -5,

t = -5/2.

Now, substitute the value of t back into the parametric equations of the line ℓ to find the coordinates (a, b, c) of the intersection point:

a = 10 + 2t = 10 + 2(-5/2) = 10 - 5 = 5,

b = 14 + 6t = 14 + 6(-5/2) = 14 - 15 = -1,

c = 5 + 2t = 5 + 2(-5/2) = 5 - 5 = 0.

Therefore, the intersection of the line ℓ and the plane P is the point (5, -1, 0).

Learn more about intersection here:

https://brainly.com/question/11297403

#SPJ11








2. What is the x -intercept of y=e^{3 x}+1 ? a) 0 b) -1 c) \ln 3 d) there is

Answers

Tthe answer is (d) there is no x-intercept. To find the x-intercept of  [tex]y=e^{(3x)}+1[/tex],

we need to substitute y = 0, as the x-intercept of a graph is where the graph crosses the x-axis.

Here's how to solve for the x-intercept of  [tex]y=e^{(3x)}+1[/tex]:

[tex]0 = e^{(3x)} + 1[/tex]

We will subtract 1 from both sides:

[tex]e^{(3x)} = -1[/tex]

Here, we encounter a problem, since [tex]e^{(3x)[/tex] is always a positive number, and -1 is not a positive number.

Therefore, the answer is (d) there is no x-intercept.

To know more about x-intercept visit:

https://brainly.com/question/32051056

#SPJ11

Let Y follow the distribution described by the pdf fy(y) = 2y on (0,1). You may use without proof that E[Y] = 2/3. Conditionally on Y = y, X follows a uniform distribution on (0, y).
(a) Compute E[X] and EX/Y].

(b) Compute the mgf Mx(.) of X.

(c) Using differentiation, obtain the expectation of X from the mgf computed above carefully justifying your steps. Hint: you may need to use l'Hôpital's rule to evaluate the derivative.

Answers

(a) Compute E[X] and E[X|Y].

To compute E[X], we need to find the expected value of X. Since X follows a uniform distribution on (0, y) given Y = y, we can use the formula for the expected value of a continuous random variable:

E[X] = ∫[0,1] x * fX(x) dx

Since X follows a uniform distribution on (0, y), its probability density function (pdf) is fX(x) = 1/y for 0 < x < y, and 0 otherwise. Substituting this into the formula, we have:

E[X] = ∫[0,1] x * (1/y) dx

To integrate this, we need to determine the limits of integration based on the range of values for x. Since X is defined as (0, y), the limits become 0 and y:

E[X] = ∫[0,y] x * (1/y) dx

= (1/y) * ∫[0,y] x dx

= (1/y) * [x^2/2] evaluated from 0 to y

= (1/y) * (y^2/2 - 0^2/2)

= (1/y) * (y^2/2)

= y/2

Therefore, E[X] = y/2.

To compute E[X|Y], we need to find the conditional expected value of X given Y = y. Since X follows a uniform distribution on (0, y) given Y = y, the conditional expected value of X is equal to the midpoint of the interval (0, y), which is y/2.

Therefore, E[X|Y] = y/2.

(b) Compute the mgf Mx(t) of X.

The moment-generating function (mgf) of a random variable X is defined as Mx(t) = E[e^(tX)].

Since X follows a uniform distribution on (0, y), its mgf can be computed as:

Mx(t) = E[e^(tX)] = ∫[0,y] e^(tx) * (1/y) dx

To integrate this, we need to determine the limits of integration based on the range of values for x. Since X is defined as (0, y), the limits become 0 and y:

Mx(t) = (1/y) * ∫[0,y] e^(tx) dx

= (1/y) * [e^(tx)/t] evaluated from 0 to y

= (1/y) * [(e^(ty)/t) - (e^(t0)/t)]

= (1/y) * [(e^(ty)/t) - (1/t)]

= (1/y) * [(e^(ty) - 1)/t]

Therefore, the mgf Mx(t) of X is (1/y) * [(e^(ty) - 1)/t].

(c) Using differentiation, obtain the expectation of X from the mgf computed above.

To obtain the expectation of X from the mgf, we differentiate the mgf with respect to t and evaluate it at t = 0.

Differentiating the mgf Mx(t) = (1/y) * [(e^(ty) - 1)/t] with respect to t:

Mx'(t) = (1/y) * [(y * e^(ty) * t - e^(ty)) / t^2]

= (1/y) * [(y * e^(ty) * t - e^(ty)) / t^2]

To evaluate this at t = 0, we can use l'Hôpital's rule, which states that if we have an indeterminate form of the type 0/0, we can take the derivative of the numerator and denominator and then evaluate the limit.

Taking the derivative of the numerator and denominator:

Mx'(t) = (1/y) * [(y^2 * e^(ty) * t^2 - 2y * e^(ty) * t + e^(ty)) / 2t]

= (1/y) * [(y^2 * e^(ty) * t - 2y * e^(ty) + e^(ty)) / 2t]

Evaluating the limit as t approaches 0:

Mx'(0) = (1/y) * [(y^2 * e^(0) * 0 - 2y * e^(0) + e^(0)) / 2(0)]

= (1/y) * [(-2y + 1) / 0]

= undefined

The derivative of the mgf at t = 0 is undefined, which means the expectation of X cannot be obtained directly from the mgf using differentiation.

The expectation of X is E[X] = y/2, and the mgf of X is Mx(t) = (1/y) * [(e^(ty) - 1)/t]. However, differentiation of the mgf does not yield the expectation of X in this case, and an alternative method should be used to obtain the expectation.

To know more about expected value visit

https://brainly.com/question/24855677

#SPJ11

5. Six people are in a room. Everyone shakes everyone else's hand one time. How many handshakes are chere? Explain your strategy for counting.

Answers

When six people are in a room and each person shakes everyone else's hand once, there will be 15 handshakes in total.

The problem asks us to determine the number of handshakes that occur when six people are in a room and each person shakes everyone else's hand once.

To count the number of handshakes, we can use a combination approach.

Each person needs to shake hands with the other five people in the room. However, if we simply multiply 6 by 5, we would be counting each handshake twice (once for each person involved).

Since a handshake between Person A and Person B is the same as a handshake between Person B and Person A, we need to divide the total count by 2 to avoid duplication.

Therefore, the number of handshakes can be calculated using the formula:

Number of handshakes = (Number of people * (Number of people - 1)) / 2

Substituting the given values, we have:

Number of handshakes = (6 * (6 - 1)) / 2 = 15

Thus, there would be 15 handshakes in total when six people are in a room and each person shakes everyone else's hand once.

Learn mkre about Number click here :brainly.com/question/3589540

#SPJ11

The volume of a sphere is 1436.03 To the nearest meter ​, what is the radius of the​ sphere? Use 3.14 for pie

Answers

The radius of the sphere to the nearest meter is 7 meters.

To find the radius of the sphere, we can use the formula for the volume of a sphere:

V = (4/3) * π * r³

Given that the volume of the sphere is approximately 1436.03, we can rearrange the formula and solve for the radius (r):

1436.03 = (4/3) * 3.14 * r³

Dividing both sides by (4/3) * 3.14, we have:

r³ = 1436.03 / ((4/3) * 3.14)

r³ ≈ 343.12

Now, to find the radius (r), we take the cube root of both sides:

r ≈ ∛343.12

Using a calculator, we find that the cube root of 343.12 is approximately 7.03.

For such more question on radius:

https://brainly.com/question/28162977

#SPJ8

Suppose that f and g are continuous on interval (−[infinity],1]. Prove : if 0≤g(x)≤f(x) on (−[infinity],1] and ∫−[infinity]1​g(x)dx diverges, then −[infinity]∫1 ​f(x)dx also diverges.

Answers

Every member of the family of functions y = Ce^(x^2/2) is a solution of the differential equation y' = xy, and a solution of the differential equation that satisfies the initial condition y(1) = 3 is y = (3 / e^(1/2)) * e^(x^2/2).

(a) To show that every member of the family of functions y = Ce^(x^2/2) is a solution of the given differential equation y' = xy, we need to substitute y = Ce^(x^2/2) into the differential equation and verify that the equation holds.

Taking the derivative of y with respect to x, we have y' = C * e^(x^2/2) * d/dx(x^2/2). Simplifying further, y' = C * e^(x^2/2) * x.

Substituting y' = xy into the equation, we have C * e^(x^2/2) * x = C * e^(x^2/2) * x.

Since the equation holds for any value of C and x, we can conclude that every member of the family of functions y = Ce^(x^2/2) is a solution of the given differential equation.

(b) To find a solution of the differential equation that satisfies the initial condition y(1) = 3, we can substitute the initial condition into the general solution y = Ce^(x^2/2) and solve for C.

Substituting x = 1 and y = 3, we have 3 = C * e^(1^2/2).

Simplifying, we get 3 = C * e^(1/2).

To solve for C, divide both sides of the equation by e^(1/2), giving C = 3 / e^(1/2).

Therefore, a solution of the differential equation that satisfies the initial condition y(1) = 3 is y = (3 / e^(1/2)) * e^(x^2/2).

Learn more about differential here:

https://brainly.com/question/31383100

#SPJ11

Length of metal strips produced by a machine process are normally distributed with a mean length of 500mm and a standard deviation of 10mm.

Giving your answer as a decimal to 4 decimal places, find the probablility that the length of a randomly selected strip is

a)Shorter than 490mm?

b)Longer than 509mm?

c)Between 479mm and 507mm ?

Answers

Given the mean length of metal strips produced by a machine process is 500mm and the standard deviation is 10mm.

The length of metal strips produced by the machine is normally distributed.

Mean, µ = 500mm, Standard deviation, σ = 10mm

(a) We need to find the probability that the length of a randomly selected strip is shorter than 490mm. Therefore, we need to find the value of the z-score in order to use the standard normal distribution tables.z = (x - µ)/σ = (490 - 500)/10 = -1P(Z < -1) = 0.1587 (from the standard normal distribution tables)Hence, the probability that the length of a randomly selected strip is shorter than 490mm is 0.1587 (approx) or 0.1587 to 4 decimal places.

(b) We need to find the probability that the length of a randomly selected strip is longer than 509mm. Therefore, we need to find the value of the z-score in order to use the standard normal distribution tables.z = (x - µ)/σ = (509 - 500)/10 = 0.9P(Z > 0.9) = 1 - P(Z < 0.9) = 1 - 0.8159 = 0.1841 (from the standard normal distribution tables).

Hence, the probability that the length of a randomly selected strip is longer than 509mm is 0.1841 (approx) or 0.1841 to 4 decimal places.

(c) We need to find the probability that the length of a randomly selected strip is between 479mm and 507mm.

Therefore, we need to find the value of z-scores for x1 and x2, respectively.z1 = (x1 - µ)/σ = (479 - 500)/10 = -2.1z2 = (x2 - µ)/σ = (507 - 500)/10 = 0.7P(479 < X < 507) = P(-2.1 < Z < 0.7) = P(Z < 0.7) - P(Z < -2.1) = 0.7580 - 0.0179 = 0.7401.

Hence, the probability that the length of a randomly selected strip is between 479mm and 507mm is 0.7401 (approx) or 0.7401 to 4 decimal places.

Learn more about probability and normal distribution https://brainly.com/question/4079902

#SPJ11

The number of cars washed in a certain car wash station is a Poisson random variable with mean of 6 cars per hour. a) What is the probability that next car arriving to this station will wait less than 45 ninutes? b) What is the probability that at least 1 cars will be washed in 30 minutes period?

Answers

a) Let X be the number of cars washed in a car wash station. The probability distribution of X is a Poisson distribution with mean μ = 6 cars per hour.The Poisson probability distribution function is given by:P(X = x) = ((μ^x)*e^-μ)/x!The waiting time T between the arrival of two consecutive cars follows an exponential distribution with parameter λ = 6 cars per hour.

The probability distribution of T is given by:P(T ≤ t) = 1 - e^(-λ*t)The waiting time between consecutive cars arriving at the station follows an exponential distribution with mean 1/λ = 1/6 hour. To find the probability that the next car will arrive at the station less than 45 minutes, we will calculate the probability that the waiting time is less than 45 minutes or 0.75 hour.P(T ≤ 0.75) = 1 - e^(-6*0.75) = 0.8256So the probability that the next car arriving at the station will wait less than 45 minutes is approximately 0.8256.

b) Let Y be the number of cars washed in a 30 minute period. The probability distribution of Y is a Poisson distribution with mean μ = (6/2) = 3 cars. We will use the Poisson probability distribution function to find the probability of at least one car being washed in a 30 minute period.P(Y ≥ 1) = 1 - P(Y = 0) = 1 - ((μ^0)*e^-μ)/0! = 1 - e^-3 ≈ 0.9502So the probability of at least one car being washed in a 30 minute period is approximately 0.9502.

Learn more about Probability here,https://brainly.com/question/13604758

#SPJ11

A volume is described as follows: 1. the base is the region bounded by y=6−6​x2/49 and y=0 2. every cross section parallel to the x-axis is a triangle whose height and base are equal. Find the volume of this object. volume = Find the volume of the solid obtained by rotating the region in the first quadrant bounded by the curves x=0,y=1,x=y3, about the line y=1.

Answers

The exact volume of the first object is approximately 992.05 cubic units, and the exact volume of the second object is (3π/14) cubic units.

Volume of the first object:

Volume =[tex]\int\limits^0_7 {1/2*(6-(6/49)x^{2})^{2} } \, dx[/tex]

Volume = [tex]\frac{1}{2} \int\limits^0_7 {36-(72/49)x^{2} +(36/2401)x^{4} } \, dx[/tex]

Volume = 1029 - (1836/7) + (10.347/7)

Volume ≈ 992.05 cubic units

Therefore, the volume of the first object is approximately 992.05 cubic units.

Volume of the second object:

Volume = [tex]\int\limits^0_1{2\pi *y^{3}*(1-y^{3} ) } \, dy[/tex]

Integrating term by term:

Volume = 2π [(1/4) - (1/7)]

Volume = 2π [(7 - 4)/28]

Volume = 2π * (3/28)

Volume = 3π/14

Therefore, the volume of the second object is (3π/14) cubic units.

Learn more about volume here:

https://brainly.com/question/32714484?

#SPJ11

Write the equation of the line (in slope-intercept form) that has an x-intercept at -6 and a y-intercept at 2. Provide a rough sketch of the line indicating the given points. [1 mark]. Exercise 2. For the polynomial f(x) = −3x² + 6x, determine the following: (A) State the degree and leading coefficient and use it to determine the graph's end behavior. [2 marks]. (B) State the zeros. [2 marks]. (C) State the x- and y-intercepts as points [3 marks]. (C) Determine algebraically whether the polynomial is even, odd, or neither.

Answers

To determine if the polynomial is even, odd, or neither, we substitute -x for x in the polynomial and simplify. -3(-x)² + 6(-x) = -3x² - 6x. Since the polynomial is not equal to its negation, it is neither even nor odd.

To write the equation of the line with an x-intercept at -6 and a y-intercept at 2, we can use the slope-intercept form of a line, y = mx + b, where m is the slope and b is the y-intercept.

In this case, the y-intercept is given as 2, so the equation becomes y = mx + 2. To find the slope, we can use the formula (y2 - y1) / (x2 - x1) with the given points (-6, 0) and (0, 2). We find that the slope is 1/3. Thus, the equation of the line is y = (1/3)x + 2.

For the polynomial f(x) = -3x² + 6x, the degree is 2 and the leading coefficient is -3. The end behavior of the graph is determined by the degree and leading coefficient. Since the leading coefficient is negative, the graph will be "downward" or "concave down" as x approaches positive or negative infinity.

To find the zeros, we set the polynomial equal to zero and solve for x. -3x² + 6x = 0. Factoring out x, we get x(-3x + 6) = 0. This gives us two solutions: x = 0 and x = 2.

The x-intercept is the point where the graph intersects the x-axis, and since it occurs when y = 0, we substitute y = 0 into the polynomial and solve for x. -3x² + 6x = 0. Factoring out x, we get x(-3x + 6) = 0. This gives us two x-intercepts: (0, 0) and (2, 0).

To determine if the polynomial is even, odd, or neither, we substitute -x for x in the polynomial and simplify. -3(-x)² + 6(-x) = -3x² - 6x. Since the polynomial is not equal to its negation, it is neither even nor odd.

Learn more about Polynomial here:

brainly.com/question/28973842

#SPJ11

Which of the following statements is true regarding z-scores for the normal probability distribution? A. Z-scores are negative for values of x that are less than the distribution mean. B. Z-scores are equal to 1.0 for values of x that are equal to the distribution mean. C. Z-scores are zero for values of x that are less than the distribution mean. D. Z-scores are positive for values of x that are less than the distribution mean. Determine whether the statement is true or false. If Allison is counting the number of customers visiting her store on a given day, she is working with continuous data. e True False

Answers

The statement "Z-scores are negative for values of x that are less than the distribution mean" is true. A

measures the number of standard deviations a given value is from the mean.

Since values less than the mean are below the average, their z-scores will be negative.

B. The statement "Z-scores are equal to 1.0 for values of x that are equal to the distribution mean" is false. The z-score for a value equal to the mean is always 0, not 1. A z-score of 1.0 represents a value that is one standard deviation above the mean.

C. The statement "Z-scores are zero for values of x that are less than the distribution mean" is false. Z-scores for values less than the mean will be negative, not zero. As mentioned earlier, the z-score of 0 corresponds to a value equal to the mean.

D. The statement "Z-scores are positive for values of x that are less than the distribution mean" is false. Z-scores for values less than the mean will be negative, not positive. Positive z-scores represent values greater than the mean.

Regarding Allison counting the number of customers visiting her store on a given day, the statement "she is working with continuous data" is true. Continuous data refers to measurements that can take on any value within a certain range. The number of customers visiting a store can be any non-negative real number, making it a continuous variable.

Learn more about z-score here:

brainly.com/question/15016913

#SPJ11

Edith buys a bag of cookies that contains 5 chocolate chip cookies, 8 peanut butter cookies, 8 sugar cookies and 5 oatmeal raisin cookies. What is the probability that Edith randomly selects an oatmeal raisin cookie from the bag, eats it, then randomly selects another oatmeal raisin cookie?

(Round your answer to 4 decimal places.)

Answers

Given that Edith buys a bag of cookies that contains 5 chocolate chip cookies, 8 peanut butter cookies, 8 sugar cookies, and 5 oatmeal raisin cookies. We have to determine the probability that Edith randomly selects an oatmeal raisin cookie from the bag, eats it, then randomly selects another oatmeal raisin cookie.

Therefore, the required probability is 0.0244 (rounded to 4 decimal places).

To solve the given question, we need to find the probability of selecting one oatmeal raisin cookie from the bag and then the probability of selecting another oatmeal raisin cookie from the remaining cookies in the bag.

Probability of selecting one oatmeal raisin cookie from the bag = number of oatmeal raisin cookies in the bag/total number of cookies in the bag.

P(one oatmeal raisin cookie) = 5/26

Probability of selecting another oatmeal raisin cookie from the remaining cookies in the bag = number of oatmeal raisin cookies in the remaining cookies in the bag/total number of remaining cookies in the bag.

After selecting one oatmeal raisin cookie, there are 25 cookies remaining in the bag, out of which 4 are oatmeal raisin cookies.P(the second oatmeal raisin cookie) = 4/25 Thus, the probability that Edith randomly selects an oatmeal raisin cookie from the bag, eats it, then randomly selects another oatmeal raisin cookie is: P(one oatmeal raisin cookie) * P(the second oatmeal raisin cookie) = 5/26 * 4/25

= 0.0244

= 0.0244 (rounded to 4 decimal places).

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

A population consists of the following four values: 10,12,14 and 16 . (i). List all samples of size 2 . (ii). Compute the population mean and the mean of the distribution of the sample mean. ) (iii). Compare the population dispersion to the sample mean dispersion.

Answers

(i) List of all samples of size 2: 10,12; 10,14; 10,16; 12,14; 12,16; 14,16.

(ii) Population mean: 13. Mean of the distribution of the sample mean: 13.

(iii) Population dispersion: 6. Sample mean dispersion: 4. Sample mean dispersion is generally smaller than the population dispersion due to limited sample size.

(i) List of all samples of size 2 from the given population:

10, 12

10, 14

10, 16

12, 14

12, 16

14, 16

(ii) Population mean:

The population mean is calculated by summing all values in the population and dividing by the total number of values:

Population mean = (10 + 12 + 14 + 16) / 4 = 52 / 4 = 13

Mean of the distribution of the sample mean:

To compute the mean of the distribution of the sample mean, we calculate the mean of all possible sample means:

Sample mean 1 = (10 + 12) / 2 = 22 / 2 = 11

Sample mean 2 = (10 + 14) / 2 = 24 / 2 = 12

Sample mean 3 = (10 + 16) / 2 = 26 / 2 = 13

Sample mean 4 = (12 + 14) / 2 = 26 / 2 = 13

Sample mean 5 = (12 + 16) / 2 = 28 / 2 = 14

Sample mean 6 = (14 + 16) / 2 = 30 / 2 = 15

Mean of the distribution of the sample mean = (11 + 12 + 13 + 13 + 14 + 15) / 6 = 78 / 6 = 13

(iii) Comparison of population dispersion and sample mean dispersion:

Since we only have four values in the population, we cannot accurately calculate measures of dispersion such as range or standard deviation. However, we can observe that the population dispersion is determined by the range between the smallest and largest values (16 - 10 = 6).

On the other hand, the sample mean dispersion is determined by the range between the smallest and largest sample means (15 - 11 = 4). Generally, the sample mean dispersion tends to be smaller than the population dispersion due to the limited sample size.

For more such questions on Population mean visit:

https://brainly.com/question/28103278

#SPJ8

What is the equation for a circle centered at the origin?
OFx+y
Or=√x+y
2
0 ₁² = (√x + y)²
07=x² + y²

Answers

The equation for a circle centered at the origin is x² + y² = r².

The equation for a circle centered at the origin is given by:

x² + y² = r²

In this equation, (x, y) represents a point on the circle, and r represents the radius of the circle.

Let's break down the equation step by step:

The center of the circle is at the origin, which means the coordinates of the center are (0, 0).

To find the equation of a circle, we start with the general equation for a circle: (x - h)² + (y - k)² = r², where (h, k) represents the coordinates of the center and r represents the radius.

Since the center is at the origin (0, 0), the equation simplifies to x² + y² = r².

The term x² + y² represents the sum of the squares of the x-coordinate and the y-coordinate of any point on the circle.

Therefore, the equation for a circle centered at the origin is x² + y² = r².

for such more question on origin

https://brainly.com/question/31185902

#SPJ8

Find the value of k if 2x^3-4x^2-3x+k is divisible by 2x-3.

Answers

2x-3 is divisible by 2x^3-4x^2-3x+k, resulting in 4x^2-6x+9-9, 2x-3(2x-3)(2x-3)-9, and -9x. Long division solves for k.

Given,2x^3-4x^2-3x+k is divisible by 2x-3.From the question,

2x-3 | 2x^3-4x^2-3x+k

⇒ 2x-3 | 2x^3-3x-4x^2+k

⇒ 2x-3 | x(2x^2-3) - 4x^2+k

⇒ 2x-3 | 2x^2-3

⇒ 2x-3 | 4x^2-6x

⇒ 2x-3 | 4x^2-6x+9-9

⇒ 2x-3 | (2x-3)(2x-3)-9

⇒ 2x-3 | 4x^2-12x+9 - 9

⇒ 2x-3 | 4x^2-12x

⇒ 2x-3 | 2x(2x-3)-9x

⇒ 2x-3 | -9x

So the value of k is 9. Here, we use long division to arrive at the above solution.

To know more about algebraic division Visit:

https://brainly.com/question/30940706

#SPJ11

solve for t please

student submitted image, transcription available below

the height of a helicopter above the ground is h=3.45t^3 , where h is in meters and t is in seconds. At t=1.50s, the helicopter releases a small mailbag. how long after its release does the mailbag reach the ground?

Answers

Initial velocity, acceleration, or any forces acting upon it, would be necessary to calculate the time it takes for the mailbag to reach the ground accurately.

To determine how long after its release the mailbag reaches the ground, we need to find the value of t when the height of the mailbag is equal to 0. In the given scenario, the height of the helicopter above the ground is given by the equation h = 3.45t^3, where h is in meters and t is in seconds.

Setting h to 0 and solving for t will give us the desired time. Let's solve the equation:

0 = 3.45t^3

To find the value of t, we can divide both sides of the equation by 3.45:

0 / 3.45 = t^3

0 = t^3

From this equation, we can see that t must be equal to 0, as any number raised to the power of 3 will be 0 only if the number itself is 0.

However, it's important to note that the given equation describes the height of the helicopter and not the mailbag. The equation represents a mathematical model for the height of the helicopter at different times. It does not provide information about the behavior or trajectory of the mailbag specifically.

Therefore, based on the information given, we cannot determine the exact time it takes for the mailbag to reach the ground. Additional information regarding the behavior of the mailbag, such as its initial velocity, acceleration, or any forces acting upon it, would be necessary to calculate the time it takes for the mailbag to reach the ground accurately.

To know more about Initial velocity, visit:

https://brainly.com/question/28395671

#SPJ11

a triangular plot of land has one side along a straight road measuring 375 feet. a second side makes a 23 degree angle with the road, and the third side makes a 21 degree angle with the road. how long are the other two sides?
the longer side of the triangular plot is _ feet. the shorter side of the triangular plot is _ feet.
round to the nearest hundreth as needed.

Answers

The longer side of the triangular plot is approximately 545.41 feet. The shorter side of the triangular plot is approximately 191.84 feet.

To calculate the lengths of the other two sides, we can use trigonometric functions. Let's denote the longer side as side A and the shorter side as side B.

First, we can find the length of side A. Since it forms a 23-degree angle with the road, we can use the cosine function:

cos(23°) = adjacent side (side A) / hypotenuse (375 feet)

Rearranging the equation, we have:

side A = cos(23°) * 375 feet

Calculating this, we find that side A is approximately 545.41 feet.

Next, we can find the length of side B. It forms a 21-degree angle with the road, so we can use the cosine function again:

cos(21°) = adjacent side (side B) / hypotenuse (375 feet)

Rearranging the equation, we have:

side B = cos(21°) * 375 feet

Calculating this, we find that side B is approximately 191.84 feet.

To know more about trigonometric functions, refer here:

https://brainly.com/question/25618616#

#SPJ11

The Centerline of a Control Chart indicates the central value of the specification tolerance
True
False

Answers

The statement "The Centerline of a Control Chart indicates the central value of the specification tolerance" is false.

A control chart is a statistical quality control tool that is used to monitor and analyze a process over time. A process control chart displays data over time on a graph. The purpose of the control chart is to determine if the process is within statistical limits and has remained consistent over time.

The Centerline of a Control Chart represents the process mean, not the central value of the specification tolerance. Furthermore, the Upper Control Limit (UCL) and the Lower Control Limit (LCL) are established using statistical calculations based on the process's standard deviation.

The specification limits, on the other hand, are established by the customer or regulatory body and represent the range of acceptable values for the product or service.

Therefore, the given statement "The Centerline of a Control Chart indicates the central value of the specification tolerance" is false.

Know more about Upper Control Limit here,

https://brainly.com/question/13861213

#SPJ11

Starting with the graph of f(x)=7^3 , write the equation of the graph that results from (a) shifting f(2)3 units downward. y= (b) shifting f(x)8 units to the left. y= (c) reflecting f(x) about the y-axis. y=

Answers

After shifting the graph 3 units downwards, we obtain the equation of the graph f(x) = 7³- 3.

Given: f(x) = 7³

To obtain the equation of the graph that results from

(a) Shift the graph 3 units downwards:

f(x) = 7³- 3

(b) Shift the graph 8 units to the left:

f(x) = 7³(x + 8)

(c) Reflect the graph about the y-axis:

f(x) = -7³

To know more about graph, visit:

https://brainly.com/question/17267403

#SPJ11

Question 6 (20 marks) Calculate the amount of payments of a \( \$ 4,000 \) loan with a \( 1.85 \% \) interest rate compounded annually that is paid off in 104 end of month instalments.

Answers

The amount of payments for a $4,000 loan with a 1.85% annual interest rate, compounded annually, paid off in 104 end-of-month installments, can be calculated using the amortization formula or financial calculators.

The amount of payments for the given loan, we can use the amortization formula:

P = (r * PV) / (1 - (1 + r)^(-n))

where:

P = amount of payment

r = interest rate per period

PV = present value (loan amount)

n = total number of periods

In this case, the interest rate is 1.85% compounded annually, so the interest rate per period would be (1.85% / 12) to account for monthly payments. The present value (loan amount) is $4,000, and the total number of periods is 104 (end-of-month installments).

By substituting the values into the formula, we can calculate the amount of payments (P) for the loan.

Alternatively, financial calculators or online amortization calculators can be used to compute the amount of payments more easily and accurately by inputting the loan details and number of installments.

Learn more about loan  : brainly.com/question/11794123

#SPJ11

# 4. For (xseq, yseq) data pairs, calculate the slope

# in a linear fit (yseq ~ xseq) and test it against the

# null hypothesis "slope=0" at significance level 0.001

xseq <- 1:16

set.seed(22)

yseq <- jitter(0.2 * xseq + 0.3, amount = 1.5)

plot(xseq, yseq, "p")

fit <- lm(yseq ~ xseq)

summary(fit)

Answers

The slope of a linear fit in (xseq, yseq) data pairs is 0.2143. It is significant at a 0.001 level of significance.

From the code above, the slope of a linear fit in (xseq, yseq) data pairs is 0.2143.

To calculate the slope of the data pairs, we can use the lm() function. The summary() function can be used to test the null hypothesis, slope = 0, at a significance level of 0.001.

From the summary output, we can see that the t-value for the slope is 4.482, and the corresponding p-value is 0.00045. Since the p-value is less than 0.001, we can reject the null hypothesis and conclude that the slope is significant at the 0.001 level of significance. Therefore, the slope of a linear fit in (xseq, yseq) data pairs is 0.2143, and it is significant at the 0.001 level of significance.

To know more about the p-value visit:

https://brainly.com/question/13786078

#SPJ11

The growing seasons for a random sample of 34 U.S. cities were recorded, yielding a sample mean of 189.1 days and the population standard deviation of 55.1 days. Estimate the true population mean of the growing season with 90% confidence. Round your answers to at least one decimal place.

Answers

The estimated true population mean of the growing season with 90% confidence is between 176.2 and 202.0 days. The confidence interval is calculated using the formula CI = X ± Zα/2(σ/√n), where CI is the confidence interval, X is the sample mean, Zα/2 is the critical value of the standard normal distribution, σ is the population standard deviation, and n is the sample size.

A confidence interval is a range of values that reflects how well a sample estimate approximates the true population parameter. A confidence level represents the level of confidence that the parameter falls within the given range.The formula to calculate a confidence interval for a population mean, assuming the population standard deviation is known, is: CI = X ± Zα/2(σ/√n), where CI represents the confidence interval, X is the sample mean, Zα/2 is the critical value of the standard normal distribution,

σ is the population standard deviation, and n is the sample size.Using this formula, the confidence interval for the true population mean of the growing season with a 90% confidence level can be calculated as:CI = 189.1 ± 1.645(55.1/√34)CI = 189.1 ± 12.9CI = (176.2, 202.0)Therefore, the estimated true population mean of the growing season with 90% confidence is between 176.2 and 202.0 days. The confidence interval is calculated using the formula CI = X ± Zα/2(σ/√n), where CI is the confidence interval, X is the sample mean, Zα/2 is the critical value of the standard normal distribution, σ is the population standard deviation, and n is the sample size.

Learn more about Standard deviation here,https://brainly.com/question/475676

#SPJ11


What is the data collection process for a qualitative
phenomenological and case study:
Sample size
Sample technique
Data collection material
Instrumentation
Use a table for the two designs.

Answers

Qualitative Phenomenological Study:

Data Collection Process  Qualitative Phenomenological Study

Sample Size                          Small, typically 5-25 participants

Sample Technique          Purposeful sampling

Data Collection Material  In-depth interviews, field notes

Instrumentation                  Interview guide, note-taking

Case Study:

Data Collection Process             Case Study

Sample Size                                     Typically one or a few cases

Sample Technique                     Purposeful sampling or convenience              

                                                           sampling

Data Collection Material             Interviews, observations, documents,  

                                                           artifacts

Instrumentation                             Interview guide, observation

                                                           checklist, data collection forms

Qualitative Phenomenological Study:

Sample Size: Qualitative phenomenological studies often have a small sample size, typically ranging from 5 to 25 participants. The emphasis is on understanding the experiences of each participant in-depth.

Sample Technique: Purposeful sampling is commonly used in qualitative phenomenological studies. Researchers select participants who have experienced the phenomenon of interest and can provide rich and meaningful data.

Data Collection Material: The primary data collection method is in-depth interviews with participants. These interviews are usually semi-structured or unstructured, allowing participants to express their experiences and perceptions openly. Researchers also take detailed field notes during and after the interviews.

Instrumentation: Researchers may use an interview guide to ensure consistency in the topics discussed during the interviews. Additionally, note-taking is an essential instrument for capturing important details and observations during the data collection process.

Case Study:

Sample Size: Case studies typically focus on one or a few cases in depth. The sample size is usually small, allowing for detailed examination and analysis of each case.

Sample Technique: Case studies often use purposeful sampling, where specific cases are chosen because they provide valuable insights or represent unique characteristics related to the research topic. Convenience sampling may also be employed if access to cases is limited.

Data Collection Material: Data collection methods in case studies can include interviews, observations, examination of documents and artifacts, and other sources of information relevant to the cases being studied. Researchers gather data from multiple sources to gain a comprehensive understanding of the cases.

Instrumentation: Depending on the nature of the study, researchers may use an interview guide to structure the interviews and ensure relevant information is obtained. Observation checklists and data collection forms may also be employed to systematically record observations and collect specific data points.

Qualitative phenomenological studies and case studies employ different data collection processes. Phenomenological studies focus on exploring the lived experiences of participants through in-depth interviews and field notes, while case studies examine specific cases using various data collection methods such as interviews, observations, and document analysis. The sample sizes, sampling techniques, data collection materials, and instrumentation can vary depending on the specific research design and objectives.

To know more about Qualitative Phenomenological Study visit

https://brainly.com/question/13187658

#SPJ11

Find the critical point of the function. Then use the second derivative test to classify the nature of this point, if possib f(x,y)=x^2−4xy+2y^2+4x+8y=6

Answers

The critical point of the function is (2, -1). The second derivative test classifies this point as a local minimum.

To find the critical point of the function f(x, y) = x² - 4xy + 2y² + 4x + 8y = 6, we need to find the values of x and y where the partial derivatives of f with respect to x and y are equal to zero. Taking the partial derivatives, we have:

∂f/∂x = 2x - 4y + 4 = 0,

∂f/∂y = -4x + 4y + 8 = 0.

Solving these equations simultaneously, we find x = 2 and y = -1. Therefore, the critical point of the function is (2, -1).

To classify the nature of this critical point, we can use the second derivative test. The second derivative test involves computing the determinant of the Hessian matrix, which is a matrix of second-order partial derivatives. In this case, the Hessian matrix is:

H = [[∂²f/∂x², ∂²f/∂x∂y],

    [∂²f/∂y∂x, ∂²f/∂y²]].

Evaluating the second-order partial derivatives, we find:

∂²f/∂x² = 2,

∂²f/∂x∂y = -4,

∂²f/∂y∂x = -4,

∂²f/∂y² = 4.

The determinant of the Hessian matrix is given by det(H) = (∂²f/∂x²)(∂²f/∂y²) - (∂²f/∂x∂y)(∂²f/∂y∂x) = (2)(4) - (-4)(-4) = 16.

Since the determinant is positive, and ∂²f/∂x² = 2 > 0, we can conclude that the critical point (2, -1) is a local minimum.

In summary, the critical point of the function is (2, -1), and it is classified as a local minimum according to the second derivative test.

Learn more about Critical point

brainly.com/question/32077588

#SPJ11

Find the equation of the straight line passing through the points (−1,1) and (2,−4)

Answers

The equation of the straight line passing through the points (-1,1) and (2,-4) is  y = -5/3x - 2/3.

To find the equation, we can use the point-slope form of a linear equation, which is y - y₁ = m(x - x₁), where (x₁, y₁) are the coordinates of a point on the line and m is the slope of the line.

We have,

Point 1: (-1, 1) with coordinates (x₁, y₁)

Point 2: (2, -4) with coordinates (x₂, y₂)

Let's calculate the slope (m):

m = (y₂ - y₁) / (x₂ - x₁)

 = (-4 - 1) / (2 - (-1))

 = -5 / 3

Now, substituting one of the points and the slope into the point-slope form, we have:

y - y₁ = m(x - x₁)

y - 1 = (-5/3)(x - (-1))

y - 1 = (-5/3)(x + 1)

Expanding the equation:

y - 1 = (-5/3)x - 5/3

To simplify the equation, let's multiply both sides by 3 to eliminate the fraction:

3(y - 1) = -5x - 5

Expanding and rearranging the equation, we get:

3y - 3 = -5x - 5

3y = -5x - 5 + 3

3y = -5x - 2

y = (-5/3)x - 2/3

Thus, the equation of the straight line passing through the points (-1,1) and (2,-4) is y = -5/3x - 2/3.

To know more about point-slope form of a linear equation, refer here:

https://brainly.com/question/29630521#

#SPJ11

A kindergarten class has several options for a field trip. A simple random sample of parents were surveyed about their preferences. What is the best reason to sample in this case? Asking all parents would be destructive. Asking all parents would be time-consuming. Asking all parents would be expensive. Sampling is not justified in this case.

Answers

The best reason to sample in the case of a kindergarten class with several options for a field trip, where a simple random sample of parents was surveyed about their preferences, is that asking all parents would be time-consuming.

Sampling in this case is a method for drawing a conclusion about a population by surveying a portion of it. It would be quite time-consuming to ask every parent of the kindergarten class which field trip options they prefer.

Therefore, in this scenario, sampling is a more feasible approach to obtain relevant data and make an informed decision without spending too much time or resources.

Sampling can also be more accurate as it is possible to collect a random sample of parents that is representative of the entire population, which can help reduce bias and provide a more precise estimation.

Know more about kindergarten here,

https://brainly.com/question/14623830

#SPJ11


Write in trigonometric form with ≤ Θ ≤
a) +
b) ―

Answers

The distance from the origin to the complex number and can be calculated using the formula: r = √(Re^2 + Im^2)

a) To write a complex number in trigonometric form with a positive angle (≤ θ ≤), we use the formula:

z = r(cosθ + isinθ)

where r is the magnitude (or modulus) of the complex number and θ is the argument (or angle) of the complex number.

b) To write a complex number in trigonometric form with a negative angle (≤ -θ ≤), we use the formula:

z = r(cos(-θ) + isin(-θ))

where r is the magnitude (or modulus) of the complex number and -θ is the negative angle.

Please note that in both cases, r represents the distance from the origin to the complex number and can be calculated using the formula:

r = √(Re^2 + Im^2)

where Re is the real part and Im is the imaginary part of the complex number.

To know more about origin refer here:

https://brainly.com/question/4675656#

#SPJ11

Other Questions
A negative charge of 0.565C exerts an upward 0.215 N Part A force on an unknown charge 0.310 m directly below it. What is the unknown charge? Express your answer in microcoulombs. Part B What is the magnitude of the force that the unknown charge exerts on the 0.565C charge? Express your answer in newtons. A negative charge of 0.565C exerts an upward 0.215 N Part A force on an unknown charge 0.310 m directly below it. - Part B Part C What is the direction of the force that the unknown charge exerts on the 0.565C charge? The significance of the Union victory at the battle of Shiloh (April 1862) is thata. Showed that the confederacy could not carry the battle in the northb. Was the single bloodiest day in US military historyc. Freed Grant to concentrate on Vicksburgd. Influenced confederate elections against Jefferson Davis and the Confederacye. Prompted slaves to run away from their plantations in even greater numbers than before Use linearity of expectation and the definition of covariance to show that: Cov(aX+bY,cZ+dW)=acCov(X,Z)+adCov(X,W)+bcCov(Y,Z)+bdCov(Y,W) where X,Y,Z,W are random variables and a,b,c,d are real numbers. We call this property bilinearity, that is Cov () is linear in each of its arguments. A diffraction grating with 230 lines per mm is used in an experiment to study the visible spectrum of a gas discharge tube. At what angle from the beam axis will the first order peak occur if the tube emits light with wavelength of 590.8 nm ? (in deg) Tries 0/12 At what angle will the second order peak occur? (in deg) Tries 0/12 If inflation is a major issue in the economy, what would be the correct fiscal policy response from an economic perspective? Why would members of Congress be unlikely to support such actions?Explain how fiscal policy can be used to close the (a) Recessionary gap and (b) inflationary gap T/F: if harmful organisms infect the gi tract, the body may help out the immune system by using vomiting When the quantity of an item on hand in inventory falls to a predetermined level, it is called an order point. True False Question 6 (1 point) Safety stock is intended to protect against the certainty Discrimination in the labor market The following table lists the name, gender, height, and minimum wage 10 people are willing to accept to work as sales clerks at a high-end clothing store. Name Gender F Height (Inches) 66 Minimum Wage (Dollars per week) $301 $325 Eileen Kate 66 Poornima $349 Hubert $362 Manuel $386 $410 Valerie F Shen $423 M 70 $447 Dmitri Antonio Caroline $460 M F 68 $484 The lowest wage that the clothing store can pay to hire five sales clerks is $ per week. Suppose the head of the clothing store has a preference for tall employees because he thinks it will increase revenue, and thus, he imposes the restriction that all sales clerks hired must be at least 67 inches in height. Under this new regulation, the wage rate the clothing store must pay to attract five sales clerks rises by $ per week. Identify two just cause reasons for termination from the following.IllnessAgeDishonestyUnwillingness to advance within the companyFraudManagement cannotDiscipline an employee for joining a unionDiscriminate someone who joins a unionInterfere with the formation of a unionAll of the above. According to the text, which strategy best represents taking action to move from the present state to an ideal state? locomotion open-mindedness exploring discovering Mountain Air Limited manufactures a line of room air purifiers. Management is currently evaluating the possible production of an air purifier for automobiles. Based on an annual volume of 10,000 units, the predicted cost per unit of an auto air purifier follows.Direct materials$8.00Direct labor1.50Factory overhead9.00Total$18.50These cost predictions include $60,000 in facility-level fixed factory overhead averaged over 10,000 units.One of the component parts of the auto air purifier is a battery-operated electric motor. Although the company does not currently manufacture these motors, the preceding cost predictions are based on the assumption that it will assemble such a motor. Mini Motor Company has offered to supply an assembled battery-operated motor at a cost of $5.50 per unit, with a minimum annual order of 5,000 units. If Mountain Air accepts this offer, it will be able to reduce the variable labor and variable overhead costs of the auto air purifier by 50 percent. The electric motor's components will cost $2.00 if Mountain Air assembles the motors.(a) Determine whether Mountain Air should continue to make the electric motor or outsource it from Mini Motor Company. (Hint: Analyze the relevant costs of making the "motors," not the entire air purifier.)Calculate the net advantage (disadvantage) of outsourcing the electric motors from Mini Motor Company.Use a negative sign with your answer to indicate a net disadvantage of outsourcing (if applicable).$Answer(b) If it could otherwise rent the motor-assembly space for $24,000 per year, should it make or outsource this component?Calculate the net advantage (disadvantage) of outsourcing the motors, assuming the space could be rented.Use a negative sign with your answer to indicate a net disadvantage of outsourcing (if applicable).$Answer(c) Management should consider which of the following nonquantitative factors in deciding whether to make or buy the motors.The quality of their own and the supplier's motors.The dependability of the supplier.Whether Mini Motor has a track record of meeting its commitments.Whether they can depend on Mini Motor to supply motors for a number of years or whether it is attempting to use some temporarily idle capacity.All of these. what is the most dangerous, and most common, emergency in scuba diving? Here are the details on 4 bonds. Current market rates are 5.5% for all 4 bonds.. Which bond would you buy and why? (3 marks) Hints: Current price is the Ask; Show your calculations (7 marks)!Bond A ABC Inc. 6% 10 Year Annual Pay Current Price $1,045.69Bond B DEF Ltd. 4% 15 Year Quarterly Pay Current Price $ 850.47Bond C MLM Inc. 5.5% 6 Year Semi-Annual Pay Current Price $ 998.40Bond D TJB Ltd. 5.5% 10 Year Annual Pay Current Price $1,000.00 what skills would the bachelors-prepared nurse need to learn in order to bring evidence-based practice to the bedside? Determine the x - intercepts and y - intercepts for the given function. (a) f(x)=x5 (b) p(x)=x31 Cineplex Inc.+You are required to conduct a financial statement analysis of a publicly listed company (PLC) from the following Be sure to use the 2021 Cineplex audit report.You should calculate and analyze financial ratios using the most recent year-end figures. There is no need to display any computations. The only thing needed is the outcome and its interpretation/analytical insights.Calculate and give analytical insights for different liquidity, profitability, and solvency measures.Conduct horizontal common size financial statement analysis with 2017 as the base year and give analytical insights. Social loafing can be avoided ifMultiple Choicegroup members do not know each other.the communication between group members is limited.group members believe that others will take advantage of them.clear performance goals exist.the culture supports and rewards individual performance \( s^{2} f(s)+s(f s)-6 F(s)=\frac{s^{2}+4}{s^{2}+s} \) which of the following best describes pierre robin syndrome? Remittance due dates for Worker's Compensation Premiums vary byjurisdiction and are often dependent on the size of the total assessablepayroll.TrueFalse