A mechanic changing the spark plugs in a car notes that the instruction manual calls for a torque with a magnitude of
39 N · m.

If the mechanic grasps the wrench as shown in the figure below, determine the magnitude (in N) of the force she must exert on the wrench.

______N

The voltage across the wire is 1.72 x [tex]10^{-3}[/tex] V

The resistance of a wire is the opposition to the flow of current. It depends on the following;

Given that the resistivity of a 1.0 m long wire is 1.72 × 10-8 ωm and its cross sectional area is 2.0 × 10-6 m2. if the wire carries a current of 0.20A

The given parameters are;

The formula to use to get R will be

R = ρL / A

Substitute all the necessary parameters into the formula

R = 1.72 x [tex]10^{-8}[/tex] x 1 / 2 x [tex]10^{-6}[/tex]

R = 8.6 x [tex]10^{-3}[/tex]  Ω

From Ohm's law, V = IR

Substitute all the necessary parameters into the formula

V = 0.2 x 8.6 × [tex]10^{-3}[/tex]

V = 1.72 x [tex]10^{-3}[/tex] V

Therefore, the voltage across the wire is 1.72 x [tex]10^{-3}[/tex] V

Learn more about Resistance here: https://brainly.com/question/17563681

#SPJ1

Explanation:

India. Total wealth: $8.9 trillion | Wealth per capita: $6,440 | India, which is the fifth-largest economy in the world, is home to 3,57,000 HNWIs and 128 billionaires.

Answer:

50505050128128128128

Explanation:

Answer:

Approximately [tex]2.03 \times 10^{7}\; {\rm m}[/tex].

Explanation:

Assume that the radius of this orbit is [tex]r[/tex].

Let [tex]m[/tex] denote the mass of this satellite and let [tex]M[/tex] denote the mass of the Earth. At a distance of [tex]r[/tex] from the center of the earth, the magnitude of the gravitational attraction on this satellite would be [tex]G\, m\, M / (r^{2})[/tex].

The question implies that the gravitational pull from the earth is the only significant force on this satellite. Hence, the net force on this satellite would be also [tex]G\, m\, M / (r^{2})[/tex].

The acceleration of this satellite would thus be [tex]a = (\text{net force}) / (\text{mass}) = G\, M / (r^{2})[/tex].

Let [tex]\omega[/tex] denote the angular velocity of this satellite. Since this satellite in in a circular motion, the acceleration on this satellite would need to satisfy [tex]a = \omega^{2} \, r[/tex].

In other words:

[tex]\begin{aligned} \frac{G\, M}{r^{2}} = a = \omega^{2} \, r \end{aligned}[/tex].

[tex]\begin{aligned} r &= \left(\frac{G\, M}{\omega^{2}}\right)^{1/3}\end{aligned}[/tex].

The question asks for a rotation of [tex]3\times (2\, \pi) = 6\, \pi\; {\text{rad}}[/tex] within a day, which is [tex]24 \times 3600\; {\rm s}[/tex]. The angular velocity of this satellite should be:

[tex]\begin{aligned}\omega = \frac{6\, \pi}{24 \times 3600\; {\rm s}} \end{aligned}[/tex].

Substitute this value into the expression for [tex]r[/tex] and evaluate:

[tex]\begin{aligned} r &= \left(\frac{G\, M}{\omega^{2}}\right)^{1/3} \\ &= \left(\frac{(6.67 \times 10^{-11}\; {\rm N \cdot m^{2} \cdot kg^{-2}}) \times (5.97 \times 10^{24}\; {\rm kg})}{((6\, \pi) / (24 \times 3600\; {\rm s}))^{2}}\right)^{1/3} \\ &\approx 2.03 \times 10^{7}\; {\rm m}\end{aligned}[/tex].

(Note that [tex]1\; {\rm N} = 1\; {\rm kg \cdot m \cdot s^{-2}}[/tex].)

The height of the water level in the water tank is 0.011 m.

t = (2× 1.72)/9.8 = 0.35 s

Velocity along x direction= x × t

= 1.33 × 0.35

= 0.46 m/s

As per Bernoulli's theorem, 1/2 × ρ × v² = ρ × g× h

=> h = v²/2g = 0.46²/(2×9.8)

= 0.011 m

Thus, we can conclude that the height of water level is 0.011m.

Learn more about the Bernoulli's theorem here:

brainly.com/question/18724307

#SPJ1

In hydrogen atom the electronic transition from n= ∞ to n=1 corresponds to largest energy emission.

Electronic transition is the jump of an electron from one energy level to another energy level .

E = hc/λ

h= plank constant =6.62*10^(-34)

c=speed of light

λ= wavelength of emited electron .

Thus , we can conclude that the electronic transition from infinity to n=1 (ground state) corresponds to largest energy emission .

Learn more about electronic transition here:

brainly.com/question/19054395

#SPJ1

Answer:  It simply means that a freely falling object would increase its velocity by 9.8 m/s per second

Answer:

Hello!

"The acceleration due to gravity on the surface of the earth is 9.8 m/s ²." What does it means that

That every second an object is in free fall, gravity will cause the velocity of the object to increase 9.8 m/s. So, after one second, the object is traveling at 9.8 m/s.

The change in the speed of the space capsule will be -0.189 m/s.

The average force exerted by each on the other will be 567 N.

The kinetic energy of each after the push for the astronaut and the capsule are 459.27 J and 32.14 J.

Mass of the astronaut, [tex]m_a[/tex] = 126 kg

Speed he acquires, [tex]v_{a}[/tex]  = 2.70 m/s

Mass of the space capsule, [tex]m_{c}[/tex] = 1800kg

The initial momentum of the astronaut-capsule system is zero due to rest.

[tex]P_f = m_av_a + m_cv_c[/tex]

[tex]P_I[/tex] = 0

[tex]m_av_a + m_cv_c = 0[/tex]

[tex]v_c =\frac{- m_a v_a}{m_c}}\\\\[/tex]

   [tex]= \frac{126* 2.70}{1800}[/tex]

   [tex]= - 0.189[/tex] m/s

Therefore,

According, to the impulse-momentum theorem;

FΔt = ΔP

ΔP = m Δv

ΔP = 126×2.70

    = 340.2 kgm/sec

t is time interval = 0.600s

F = ΔP/Δt

F = 340.2/0.600

  = 567 N

Therefore, the average force exerted by each on the other will be 567 N.

The Kinetic Energy of the astronaut;

K.E = [tex]\frac{1}{2} m v^2[/tex]

     [tex]= \frac{1}{2}[/tex] × 126 × [tex](2.70) ^2[/tex]

     = 459.27 J

The Kinetic Energy of the capsule;

K.E = [tex]\frac{1}{2} m v^2[/tex]

     = [tex]\frac{1}{2}[/tex]×1800×[tex](0.189) ^2[/tex]

     = 32.14 J

Therefore, the kinetic energy of each after the push for the astronaut and the capsule are 459.27 J and 32.14 J.

Learn more about kinetic energy here:

https://brainly.com/question/26520543

#SPJ1

Answer:

100rad because it angular velocity

(a) The electric field strength at a point 1.00 cm to the left of the middle is  2.0 x 10⁷ N/C.

(b) The magnitude of the force is 94.4 N and direction of the force on it towards the left.

The electric field strength at a point 1.00 cm to the left of the middle is calculated as follows;

E = kq/r²

E1 = (9 x 10⁹ x 6 x 10⁻⁶)/(0.02)²

E1 = 1.35 x 10⁸ N/C

E2 =  -(9 x 10⁹ x 1.5 x 10⁻⁶)/(0.01)²

E2 = - 1.35 x 10⁸ N/C

E3 = - (9 x 10⁹ x 2 x 10⁻⁶)/(0.03)²

E3 = -2.0 x 10⁷ N/C

E = E1 + E2 + E3

E = +1.35 x 10⁸ N/C - 1.35 x 10⁸ N/C - (-2.0 x 10⁷ N/C)

E = +2.0 x 10⁷ N/C

F = Eq

F = 2.0 x 10⁷ x -4.72 x 10⁻⁶

F = -94.4 N

Thus, the direction of the force will be towards the left.

Learn more about force on charge here: brainly.com/question/25923373

#SPJ1

The height of the light house is 17.86m.

To find the answer, we have to know about the simple pendulum.

                       [tex]T=2\pi \sqrt{\frac{l}{g} } \\[/tex]

where, g is acceleration due to gravity, and l is the length of the pendulum.

              [tex]h=(\frac{T}{2\pi }) ^2g=(\frac{8.48}{2*3.14}) ^2*9.8=17.86m[/tex]

Thus, we can conclude that, the height of the light house is 17.86m.

Learn more about the simple pendulum here:

https://brainly.com/question/23269083

#SPJ1

Answer:

453 gm

Explanation:

Immersed objects are buoyed up by force equal to mass of displaced liquid

400 + 53 = 453 gm  in air

When a piece of elastic material between two pieces of wood is being stretched beyond its limit, the elastic material or the object does not return to its original length when the force is removed

However, in physics, the type of stress applied when an elastic material is stretched is tensile stress.

Recall:

Stess is defined as force per unit area

Mathematically; Stress = F/A

Elasticity can be defined as the ability of a deformed elastic material or body to return to its original size and shape when the forces causing the deformation are removed.

So therefore, when a piece of elastic material between two pieces of wood is being stretched beyond its limit, the elastic material or the object does not return to its original length when the force is removed

Complete question:

What happens when a piece of elastic material between two pieces of wood is being stretched beyond its limit?

Learn more about elasticity:

https://brainly.com/question/7694106

#SPJ1

The frictional force between the crate and the ramp is determined as 35.2 N.

Apply the principle of conservation energy to calculate the change in the energy of the crate.

Change in energy of the crate = energy loss to friction

P.Ei - K.Ef = E

mgh - ¹/₂mv² = E

where;

(30)(9.8)(2) - (0.5)(30)(2²) = E

528 J = E

E = Fd

where;

F = E/d

F = (528)/(15)

F = 35.2 N

Thus, the frictional force between the crate and the ramp is determined as 35.2 N.

Learn more about frictional force here: https://brainly.com/question/4618599

#SPJ1

Faraday's law is applicable in the mechanism behind electric generators, credit cards, metal detectors, computer hard drives and electronic drum

Faraday's law states that a changing magnetic field through an area or equivalently, a changing area with constant field will cause a voltage.

So therefore, Faraday's law is applicable in the mechanism behind electric generators, credit cards, metal detectors, computer hard drives and electronic drum

Learn more about Faraday's law:

https://brainly.com/question/1640558?referrer=searchResults&source=aidnull

#SPJ1

The required orbital speed of the ice cube is 355,358m/s

The force of gravitation is directly proportional to the product of the masses and inversely proportional to the distance between them. This can be expressed mathematically as;

Fr = GMm/r²

The distance is calculated as;

s = Gm/r²

Solving both equation, we will have:

v²/r = Gm/r²

v² = Gm/r

Take the square root of both sides

v = √Gm/r

Solve the required orbital speed

V =  √6.67×10^-11 * 5.68 x 10^26 / 3.00 x 10^5

V = 355358.97m/s

Hence the required orbital speed of the ice cube is 355,358m/s

Learn more on orbital speed here: https://brainly.com/question/22247460

#SPJ1

Answer: 56.44°

Explanation:

Given:

Converting to SI Units (m/s):

= (1.2 mach)(340 ms^-1 / 1 Mach)

u  = 408 m/s

Find:

We have, sinθ = speed of sound / speed of object

               sinθ = v / u

                   θ = sin^-1 (v / u)  

                      = sin^-1 (340 / 408)

                   θ = 56.44°

(a) The angular acceleration will be 26.035 rev/[tex]min^{2}[/tex].

(b) The final angular velocity is expected to be 33.846 rev/min.

Given.

t=1.3 min, Θ=22 rev, [tex]ω_{i}[/tex]=0

We know, Θ= [tex]ω_{i}[/tex]t+[tex]\frac{1}{2}[/tex][tex]\alpha[/tex][tex]t^{2}[/tex]

22=0+[tex]\frac{1}{2}[/tex][tex]\alpha[/tex][tex]1.3^{2}[/tex]

[tex]\alpha[/tex]=26.035 rev/[tex]min^{2}[/tex]

[tex]ω_{f} =ω_{i}+\alpha t[/tex]=0+26.035*1.3=33.846 rev/min

An object's rate of change in angular position or orientation over time is depicted by its angular velocity, rotational velocity, or both ( or ), also known as the angular frequency vector (i.e. how quickly an object rotates or revolves relative to a point or axis). The direction of the pseudovector is normal to the instantaneous plane of rotation or angular displacement, and its magnitude denotes the angular speed, or the rate at which the item rotates or revolves. It is customary to use the right-hand rule to specify the direction of angular motion. A general definition of angular velocity is "angle per unit time" (angle replacing distance from linear velocity with time in common). Radians per second is how angles are measured in the SI.

Learn more about Angular velocity here:

https://brainly.com/question/13649539

#SPJ1

Kinetic energy of pieces A and B are 2724 Joule and 5176 Joule respectively.

Mass of piece B = Mb

Ma×Va = Mb×Vb

So, 1.9Mb × Va = Mb×Vb

=> 1.9Va = Vb

=>1/2 × Ma × Va² + 1/2 × Mb × Vb² = 7900

=> 1/2 × Ma × Va² + 1/2 × (Ma/1.9) × (1.9Va)² = 7900

=> 1/2 × Ma × Va² ×(1+1.9) = 7900 j

=> 1/2 × Ma × Va² = 7900/2.9 = 2724 Joule

Thus, we can conclude that the kinetic energy of piece A and B are 2724 Joule and 5176 Joule respectively.

Learn more about the kinetic energy here:

brainly.com/question/25959744

#SPJ1

The maximum force constant of the spring Kmax is 2337.9 N/m.

The force constant or spring constant is defined as the force required to stretch or compress a spring such that the displacement in the spring is 1 meter.

Force constant is denoted by K and its unit is N/m.

Where;

K = spring constant

x = displacement

The work done by the spring is given below as follows:

Work done = Fx/2

Kinetic Energy = mv²/2

Force on an inclined plane = mgsinθ

Total force, F = mgsinθ + frictional force

F = 1390 * sin 22° + 515

F = 1035.7 N

Work done = change in KE

Fx/2 = mv²/2

Fx = mv²

m  = 1390/9.81 = 141.692

Solving for x;

x = mv²/F

x = 141.692 * 1.8²/1035.7

x = 0.443 m

The maximum force constant of the spring Kmax = 1035.7/0.443

Kmax = 2337.9 N/m

In conclusion, the maximum force constant of the spring  is the ratio of the total force and displacement.

Learn more about force constant of a spring at: https://brainly.com/question/12253978

#SPJ1

Note that the complete question is given below:

You are designing a delivery ramp for crates containing exercise equipment. The crates of weight 1490 N will move with speed 2.0 m/s at the top of a ramp that slopes downward at an angle 21.0 ∘. The ramp will exert a 533 N force of kinetic friction on each crate, and the maximum force of static friction also has this value. At the bottom of the ramp, each crate will come to rest after compressing a spring a distance x. Each crate will move a total distance of 8.0 m along the ramp; this distance includes x. Once stopped, a crate must not rebound back up the ramp. Calculate the maximum force constant of the spring Kmax that can be used in order to meet the design criteria

The correct answer is 5828.675 J.

Given combined mass 4kg and mass of bullet 150gm=0.150kg.

Total mass= 4+0.150=4.150kg

Velocity=53 m/s

Kinetic energy = [tex]\frac{1}{2} *m*v^{2}[/tex] =0.5*4.150*[tex]53^{2}[/tex] =5828.675 J

Kinetic energy is a type of power that an item or particle possesses as a result of motion. When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and consequently obtains kinetic energy. A moving object or particle's kinetic energy, which depends on both mass and speed, is one of its characteristics. Any combination of motions, including translation (or travel along a path from one location to another), rotation about an axis, and vibration, may be used as the type of motion.

A body's translational kinetic energy is equal to  [tex]\frac{1}{2} *m*v^{2}[/tex] , or one-half of the product of its mass, m, and square of its velocity, v.

a trolley and a sandbag have a combined mass of 4 kg. a bullet with a mass of 150 gram is fired towards the trolley and is lodged in the sand bag immediately after the Collision, on the trolley and sandbag in combination with the bullet, move backwards at 53 metre per second calculate the kinetic energy of the trolley , with the sandbag and bullet ,directly after the Collision ​

Learn more about kinetic energy here:

https://brainly.com/question/12669551

#SPJ1

Angular momentum is conserved in the above examples such as the ice skater, the torque or the rotating effect of the force is almost equal to zero because there is negligible friction between the skates and the ice.

The principle of conservation of angular momentum states that the total angular momentum acting on an object is constant, provided there is no  external torque acting on the object.

Angular momentum of a system is conserved as long as there is no net external torque acting on the system.

Thus, angular momentum is conserved in the above examples such as the ice skater, the torque or the rotating effect of the force is almost equal to zero because there is negligible friction between the skates and the ice.

Learn more about angular momentum here: https://brainly.com/question/7538238

#SPJ1

The orbital speed of an ice cube in the rings of saturn is approximately 3.56 * 10^6 m/s

The law of gravitation states that the force of gravitation is directly proportional to the product of the masses and inversely proportional to the distance between the masses. Mathematically;

F = GMm/r²

where

M and m are the mass of ice cube and

Recall that;

s = Gm1/r^2

Also;

F = sm²

Substitute to have;

s = m²/F

For the centripetal acceleration

a = v²/r

Such that;

v²/r = Gm/r²

v² = Gm/r

v = √Gm/r

Substitute the given parameters into the formula to have:

V =  √6.67×10^-11 *  5.68 x 10^26 / 3.00 x 10^5

V = 355358.97m/s = 3.56 * 10^6 m/s

Therefore the orbital speed of an ice cube in the rings of saturn is approximately 3.56 * 10^6 m/s

Learn more on orbital speed here: https://brainly.com/question/7260440

#SPJ1

Based on the calculations, the average velocity is equal to 360 m/s and the percent difference is equal to 4.72%.

An average velocity can be defined as the total distance covered by a physical object divided by the total time taken.

An average is also referred to as mean and it can be defined as a ratio of the sum of the total number in a data set to the frequency of the data set.

Mathematically, the average velocity for this data set would be calculated by using this formula:

Average = [F(v)]/n

Vavg = [v₁ + v₂ + v₃ + v₄ + v₅)/5

Since the values of the average velocity from the table are missing, we would assume the following values for the purpose of an explanation:

Substituting the parameters into the formula, we have:

Vavg = [300 + 450 + 500 + 250 + 300)/5

Vavg = 1800/5

Vavg = 360 m/s.

Next, we would calculate the percent difference by using this formula:

[tex]Percent \;difference = \frac{[V_{avg}\;-\;V_{sound}]}{V_{sound}} \times 100[/tex]

Percent difference = [360 - 343]/360 × 100

Percent difference = 17/360 × 100

Percent difference = 0.0472 × 100

Percent difference = 4.72%.

Read more on average here: https://brainly.com/question/9550536

#SPJ1

Answer:

Gravity exist between two objects that have mass

A 0.350-kg ice puck, moving east with a speed of 5.22 m/s , has a head-on collision with a 0.950-kg puck initially at rest then

(a) The speed of the 0.350- kg puck after the collision - 2.40 m/s

(b) The direction of the velocity of the 0.350- kg puck after the collision is towards West.

c) The speed of the 0.950- kg puck after the collision is 2.82 m/s

d) The direction of the velocity of the 0.950- kg puck after the collision is towards East.

Mass of ice puck, m₁ = 0.350 kg

Mass of another puck, m₂ = 0.950 kg

Velocity of ice puck, v₁ = 5.22 m/s

Velocity of another puck, v₂ = 0 m/s

[tex]v^{'}_1= ?[/tex]

[tex]v^{'}_2= ?[/tex]

[tex]m_{1} v_{1} + m_{2} v_{2 }= m_{1} v^{'} _{1} + m_{2} v^{'}_{2 }[/tex]

[tex]v_{1} - v_{2} = - ( v^{'}_1 - v^{'}_2 )\\v_{1} - v_{2} = - v^{'}_1 + v^{'}_2\\v^{'}_2 = v^{'}_1 + v_{1}\\\\\\m_{1} v_{1} + m_{2} v_{2 }= m_{1} v^{'} _{1} + m_{2} v^{'}_{1 } + m_{2} v_{1 }[/tex]

[tex](0.35)(5.22) + 0 = 0.350 v^{'} _{1} + 0.950 v^{'}_{1 }+ (0.950)(5.22)\\1.827 = 0.350v^{'} _{1} + 0.950v^{'}_{1 } + 4.959\\1.827 - 4.959 = 1.3 v^{'} _{1}\\- 3.132 = 1.3 v^{'} _{1}\\v^{'} _{1} = -2.40 m/s\\\\\\[/tex]

Therefore, the speed of the 0.350- kg puck after the collision is - 2.40 m/s.

[tex]v^{'}_2 = v^{'} + v_1[/tex]

    [tex]= -2.40+5.22[/tex]

    [tex]= 2.82 m/s[/tex]

Therefore, the speed of the 0.950- kg puck after the collision is 2.82 m/s.

Learn more about speed here:

https://brainly.com/question/12661922

#SPJ1

Answer:

Anticlockwise directions

Please mark me Brainliest to help me

change in velocity is 3m/s,the force exterted by bat on ball is 4.8N and the acceleration is 30m/s².

1) Speed is scalar quantity but velocity is vector quantity.

2) Speed is distance followed by an individual with respect to  time and velocity is displacement with respect to time .

1) final velocity- intial velocity

 25-22= 3m/s

2) The force is

F= ma

 . 0.16×30= 4.8N

to learn more about speed and velocity click https://brainly.com/question/19425181

#SPJ9

Answer:

s^ -1    ( or    1/sec)

Explanation:

Velocity is given in units of displacement / sec

like feet /sec   or   m/sec    

so b would have units of   s^-1

(or perhaps a more general term would be   time^-1)

The energy needed to move an electron in a hydrogenatome from the ground state (n=1) to n=3 will be 1.93 *10^-18J and 12.09 eV.

The following can be deduced:

Energy of electron in hydrogen atom is

En = -13.6 /n2 eV

where n is principal quantum number of orbit.

Energy of electron in first orbit = E1 = -13.6 / 12 = - 13.6eV

Energy of electron in third orbit = E3 = -13.6 /32 = -1.51 eV

Energy required to move an electron fromfirst to thirdorbit ΔE = E3- E1

ΔE = -1.51 - ( 13.6) = 12.09 eV

Energy in Joule = 12.09 *l/× 1.6 × 10^-19 = 1.93 × 10^-18 J.

Learn more about energy on:

https://brainly.com/question/13881533

#SPJ1

Complete question:

How much energy is needed to move an electron in a hydrogenatome from the ground state (n=1) to n=3? Give theanswer (a) in joules and (b) in eV.