Option C is the one that explains the movement of the compass needle in this situation the best: The magnetic field created by the current in the wire pulls the needle towards it.
According to Ampere's law, when an electric current passes through a wire, it generates a magnetic field all around the wire. The compass needle moves as a result of this magnetic field's interaction with the compass needle's magnetic field. The position of the compass needle changes as a result of alignment with the magnetic field generated by the wire's current.
Because the copper wire does not by itself magnetize the needle, option A is erroneous. Option B is similarly mistaken since the copper wire is not magnetized by the needle. Option D cannot be used explanation as the insulation on the wire does not play a role in exerting a force on the needle.
To know more about compass:
https://brainly.com/question/30469055
#SPJ4
A transverse sinusoidal wave of wave vector k=4.38rad/m is traveling on a stretched string. The transverse speed of a particle on the string at x=0 is 45.5 m/s. What is the speed of the wave in m/s, when it displaces 2.0 cm from the mean position? Provided the displacement is 4.0 cm when the transverse velocity is zero.
A transverse sinusoidal wave of wave vector k=4.38rad/m is traveling on a stretched string.
The transverse speed of a particle on the string at x=0 is 45.5 m/s. The wave equation of the string is given by,[tex]\[y = A \sin (kx - \omega t)\][/tex] Where y is the displacement, A is the amplitude, k is the wave vector, x is the position, t is the time and ω is the angular frequency of the wave.
The transverse velocity of a particle at position x on the string is given by,
[tex][v = \frac{\partial y}{\partial t} = - A\omega \cos (kx - \omega t)\]At x = 0, y = A sin (0) = 0, and v = 45.5 m/s.So, \[45.5 = - A\omega \cos (0)\][/tex]
∴[tex]\[\omega = - \frac{45.5}{A} \]At x = 0.02 m, y = A sin (0.0876 - ωt) = 0.04 m and v = 0.[/tex]
Using [tex]\[k = \frac{2\pi}{\lambda} = \frac{2\pi}{x}\]∴ \[x = \frac{2\pi}{k}\]∴ \[kx = 2\pi\]At x = 0.02 m, \[kx = 0.0876\]So, \[\omega t = 0.0876 - \sin ^{-1} (\frac{0.04}{A})\][/tex]
The velocity of the wave is given by, [tex]\[v_{wave} = \frac{\omega}{k} = \frac{2\pi}{\lambda} = \frac{\lambda f}{\lambda} = f\][/tex] where f is the frequency of the wave.
To know more about sinusoidal visit:
https://brainly.com/question/32356854
#SPJ11
be driving a nail with a hammer When a hammer with a mass of 5.5kg hits a nail. the hammer stops at a speed of 4.8m/s and stops in about 7.4ms. 1) How much impact does the nail receive? 2) What is the average force acting on a nail?
1) the impact that the nail receives is -149.856 Joules
2) the average force acting on a nail is 7.43 kN (approx.)
1) The impact that the nail receives can be calculated using the formula for kinetic energy as given below;
Kinetic energy = 0.5 * mass * velocity²
Kinetic energy of the hammer before hitting the nail can be calculated as;
KE1 = 0.5 * m * v²
Where,m = mass of the hammer = 5.5 kgv = velocity of the hammer before hitting the nail = 0 m/s
KE1 = 0.5 * 5.5 * 0² = 0 Joules
Kinetic energy of the hammer after hitting the nail can be calculated as;
KE2 = 0.5 * m * v²
Where,v = velocity of the hammer after hitting the nail = 4.8 m/sKE2 = 0.5 * 5.5 * 4.8² = 149.856 Joules
The impact that the nail receives can be calculated as the difference in kinetic energy before and after hitting the nail.
Impact = KE1 - KE2 = 0 - 149.856 = -149.856 Joules
2) The average force acting on a nail can be calculated using the formula given below;
Average force = (final velocity - initial velocity) / time taken
The time taken by the hammer to stop after hitting the nail is given as 7.4 ms = 0.0074 seconds.
The final velocity of the hammer after hitting the nail is 4.8 m/s
.The initial velocity of the hammer before hitting the nail can be calculated using the formula of motion as given below;v = u + atu = v - at
Where,u = initial velocity of the hammer
a = acceleration of the hammer = F / mu = a * t + (v - u)
F = mu * a
Where,m = mass of the hammer
a = acceleration of the hammer = F / mut = time taken by the hammer to stop after hitting the nail
v = final velocity of the hammer after hitting the nail
u = initial velocity of the hammer before hitting the nail
u = v - a * tu = 4.8 - (F / m) * 0.0074
The average force acting on the nail can be calculated using the above equations.
Average force = (4.8 - (F / m) * 0.0074 - 0) / 0.0074F = (4.8 - u) * m / t
Average force = (4.8 - (4.8 - (F / m) * 0.0074)) * m / 0.0074
Average force = F * 5.5 / 0.0074
Average force = 7432.4324 * F
Average force = 7.43 kN (approx.)
Learn more about kinetic energy at
https://brainly.com/question/15032311
#SPJ11
The electron mass is 9×10
−31
kg. What is the momentum of an electron traveling at a velocity of ⟨0,0,−2.6×10
8
⟩m/s ?
p
= kg⋅m/s What is the magnitude of the momentum of the electron? p= \& kg⋅m/s
An electron is moving with a velocity of -2.6 x 10^8 m/s.
Calculate the momentum and magnitude of the momentum of the electron.
The mass of the electron is
[tex]9 × 10^−31 kg.[/tex]
The electron mass is an essential property of the electron, having a value of
[tex]9×10^−31 kg.[/tex]
The momentum of the electron is given by:
[tex]$p = mv$[/tex]
where p is the momentum, m is the mass of the electron, and v is the velocity.
Substituting the values given into the equation:
[tex]$$p = (9×10^{−31} kg) × (-2.6×10^{8} m/s)$$$$p = -2.34×10^{-22} kg⋅m/s$$[/tex]
The momentum of the electron is
[tex]-2.34×10^−22 kg·m/s.[/tex]
The magnitude of momentum is the absolute value of momentum.
It is given by:
[tex]$$|p| = |-2.34×10^{−22} kg⋅m/s|$$$$|p| = 2.34×10^{−22} kg⋅m/s$$[/tex]
the magnitude of the momentum of the electron is 2.34×10^−22 kg·m/s.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Figure 1: Triangular Resistive network 1. (6pt) Use circuit theory to find the effective resistance: (a) (2pt) R
12
( a battery is cotnocted to node 1 and node 2). (b) (2pt) R
1Ω
(a battery is cotasected to aode 1 and aode 3). (c) (2pt) R
2s
( a battery is cotnected to aode 2 and node 3 ). 2. (3pt) Find the Laplacin (the Kirchhoff) matrix L associated to this resistive network- 3. (16pt) Find the eigenvalues (λ
n
) and the eqemvectors (u
n
) of the matrix L. 4. (10pt) Find the matrices D and r
−T
such that D=F
T
LI ENGINEERING MATHEMATICS I GA ASSIGNMENT where D=
⎝
⎛
λ
1
0
0
0
λ
2
0
0
0
λ
3
⎠
⎞
,λ
1
<λ
2
<λ
1
5. (15pt) Use the "two point resistance" theoten to find the effective resistance: (a) (5pt)R
12
(b) (5pt)R
13
(c) (5pt)R
23
The two-point resistance theorem to determine the effective resistance as follows R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω and R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω and R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
(a) We can use circuit theory to determine the effective resistance, which gives:R12=1+2=3Ω.
The effective resistance can be determined using circuit theory, which gives:R13=(1×2)/(1+2)=2/3Ω
(c) We can determine the effective resistance using circuit theory, which gives:R23=1+2=3Ω.2.
We can use the nodal analysis method to calculate the Laplacian (Kirchhoff) matrix L associated with this resistive network. This matrix is given by:L = [ 3 -1 -2-1 2 -1-2 -1 3 ]3.
By using the Kirchhoff matrix L, the eigenvalues (λn) and eigenvectors (un) of the matrix L are calculated.
Since the dimension of matrix L is 3×3, the characteristic equation is given as:|L - λI|= 0, where I is the identity matrix of order 3.
Therefore, we can get the eigenvalues as follows:|L - λI| = [3-λ][2-λ](3-λ)-[(-1)][(-2)][(-1)] = 0=> λ3 - 8λ2 + 13λ - 6 = 0=> (λ - 1)(λ - 2)(λ - 3) = 0.
Hence, the eigenvalues of matrix L are λ1=1, λ2=2 and λ3=3.
Then, the eigenvectors of matrix L can be obtained by solving the following system of equations:(L - λnIn)un = 0.
We can solve for the eigenvectors corresponding to each eigenvalue:For λ1 = 1:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ1=1, we have the following:2u1 - u2 - 2u3 = 0 u1 - 2u2 + u3 = 0 u1 = u1.
Then the eigenvector is:u1 = [ 1, 1, 1 ]TFor λ2 = 2:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ2=2, we have the following:u2 - u3 = 0 u1 - u3 = 0 2u2 - u1 - 2u3 = 0.
Then the eigenvector is:u2 = [ -1, 0, 1 ]TFor λ3 = 3:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ3=3, we have the following:u1 + 2u2 + u3 = 0 u2 + 2u3 = 0 u1 + 2u2 + u3 = 0.
Then the eigenvector is:u3 = [ 1, -2, 1 ]T.4.
Here is the procedure for calculating the D and r-T matrices using the eigenvectors of L:Arrange the eigenvectors in the columns of a matrix F as follows:F = [ u1 u2 u3 ].
Construct the diagonal matrix D by arranging the eigenvalues in decreasing order along the diagonal, as follows:D = [λ1 0 0 0 λ2 0 0 0 λ3].
Compute the inverse of matrix F and denote it by F-1Calculate the matrix r-T by using the following formula:r-T = F-1Calculate the D matrix by using the following formula:D = F-1 L F.5.
We can use the two-point resistance theorem to determine the effective resistance as follows:(a) R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω(b) R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω(c) R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
Learn more about resistance here ;
https://brainly.com/question/29427458
#SPJ11
A thin, spherical shell has a radius of 30.0 cm and carries a charge of 150μC. Find the electric field a) 10.0 cm from the shell's center. b) 40.0 cm from the shell's center.
a) The electric field at 10.0 cm from the shell's center is zero.
b) The electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To find the electric field at a distance from a thin, spherical shell, we can make use of Gauss's law. According to Gauss's law, the electric field due to a spherically symmetric charge distribution outside the shell is the same as that of a point charge located at the center of the shell, with the total charge of the shell.
Radius of the spherical shell (r) = 30.0 cm
Charge of the spherical shell (Q) = 150 μC = 150 × 10⁻⁶ C
a) To find the electric field at a distance of 10.0 cm from the shell's center, which is less than the radius of the shell, we can consider a Gaussian surface inside the shell. Since the net charge enclosed by the Gaussian surface is zero, the electric field at this distance will be zero. This is because the electric field due to each infinitesimally small charge element on the shell cancels out exactly.
Therefore, the electric field at 10.0 cm from the shell's center is zero.
b) To find the electric field at a distance of 40.0 cm from the shell's center, which is greater than the radius of the shell, we can use Gauss's law. The electric field due to a point charge at the center of the shell is given by:
E = k * (Q / r²)
where E is the electric field, k is the electrostatic constant (8.99 × 10⁹ N m²/C²), Q is the charge of the shell, and r is the distance from the center of the shell.
Substituting the given values:
E = (8.99 × 10⁹ N m²/C²) * (150 × 10⁻⁶ C) / (0.40 m)²
Calculating the electric field:
E ≈ 3.36 × 10⁵ N/C
Therefore, the electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To know more about Gauss's law, refer to the link below:
https://brainly.com/question/30490908#
#SPJ11
A crate with mass m = 1.5 kg rests on the surface of a bar. The coefficient of static friction between the crate and the bar is μs = 0.74 and the coefficient of kinetic friction is μk = 0.26.
a) Write an expression for Fm the minimum force required to produce movement of the crate on the surface of the bar.
b) Solve numerically for the magnitude of the force Fm in Newtons.
c) Write an expression for a, the crate's acceleration, after it begins moving. (Assume the minimum force, Fm, continues to be applied.)
d) Solve numerically for the acceleration, a in m/s2.
a) Expression for the minimum force Fm required to produce the movement of the crate on the surface of the bar.
The minimum force required to produce movement of the crate on the surface of the bar is given by the expression: [tex]$$F_m = \mu_s m g$$[/tex]
Where, μs is the coefficient of static friction between the crate and the bar, m is the mass of the crate and g is the acceleration due to gravity.
μs = 0.74, m = 1.5 kg and g = 9.81 m/s²So, Fm = 10.877 N. (numerical value)
b) Solving numerically for the magnitude of the force Fm in Newtons
.Fm = 10.877 N. (numerical value)
c) Expression for a, the crate's acceleration after it begins moving.After it begins to move, the crate's acceleration is given by the expression:
[tex]$$a = \mu_k g$$[/tex]
Where, μk is the coefficient of kinetic friction between the crate and the bar, and g is the acceleration due to gravity.
μk = 0.26 and g = 9.81 m/s²
So, a = 2.5506 m/s² (numerical value)
d) Solving numerically for the acceleration a in m/s².a = 2.5506 m/s² (numerical value)
To know more about kinetic friction visit:
https://brainly.com/question/30886698
#SPJ11
. A 5 lbm system was taken from 50° F to 150° F. How much energy
in the form of heat was added to the system to produce this
temperature increase?
The amount of energy in the form of heat that was added to the 5 lbm system to produce a temperature increase from 50°F to 150°F is 113.4 joules.
To calculate the amount of energy in the form of heat that was added to a 5 lbm system to produce a temperature increase from 50°F to 150°F, we will use the specific heat capacity of the material in the system. The equation we will use is:
Q = mcΔT
where:
Q = amount of heat (in joules or calories) added or removed from the system
m = mass of the system (in pounds or kilograms)
c = specific heat capacity of the material (in joules/pound °F or calories/gram °C)
ΔT = change in temperature (in °F or °C)
First, let's convert the mass of the system from pounds to kilograms:
5 lbm ÷ 2.205 lbm/kg = 2.268 kg
Next, let's determine the specific heat capacity of the material in the system. If it is not given, we can look it up in a table. For example, the specific heat capacity of water is 1 calorie/gram °C or 4.184 joules/gram °C.
Let's assume the material in the system has a specific heat capacity of 0.5 joules/pound °F.
Substituting the values into the equation:
Q = (2.268 kg)(0.5 joules/pound °F)(150°F - 50°F)
Q = (2.268 kg)(0.5 joules/pound °F)(100°F)Q = 113.4 joules
Therefore, the amount of energy in the form of heat that was added to the 5 lbm system to produce a temperature increase from 50°F to 150°F is 113.4 joules.
Learn more about amount of energy at https://brainly.com/question/26380678
#SPJ11
Two converging lenses with focal lengths of 50 cm and 22 cm are 15 cm apart. A 2.5-cm-tall object is 25 cm in front of the 50-cm-focal-length lens. negative value if the image is on the same side. S = 33 cm Submit Previous Answers Correct Here we learn to determine image distance from the optical system consisting of two lenses. Part B Calculate the image height. Express your answer to two significant figures and include the appropriate units. D μA ? h' = 2.2 cm Submit Previous Answers Request Answer X Incorrect; Try Again; 8 attempts remaining Provide Feedback
According to the question,Two converging lenses with focal lengths of 50 cm and 22 cm are 15 cm apart.A 2.5-cm-tall object is 25 cm in front of the 50-cm-focal-length lens.
The object distance, u = -25 cm, because the object is to the left of the lens. The focal length of the first lens, f1 = 50 cm. The distance between the lenses, d = 15 cm.
The focal length of the second lens, f2 = 22 cm.
And the image distance, v is required.
Calculate the image height.μ = v/u = (d-f1)/f1d = 15 cmf2 = 22 cmv = (f2*d)/(f1+f2-d).
Using the formula to calculate v, we get;v = 66 cm.
Now, using the formula; Magnification, m = -v/u.
So, the magnification is;m = 66/(-25) = -2.64h' = m * h where h is the height of the object.
So;h' = -2.64 * 2.5 = -6.6 cm (rounded off to two significant figures).
As the magnification is negative, the image is inverted.
Therefore, the image height is 6.6 cm and it is inverted.
Learn more about focal length here ;
https://brainly.com/question/2194024
#SPJ
On a ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m. Calculate the final KG of the ship.
The final KG of the ship is 9.01639 m.The ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m.
We need to calculate the final KG of the ship.
We know that; Moment before = Moment after
Moment before = (total weight on the ship) x (KG of ship)Moment after = (total weight on the ship) x (KG of ship).
The total weight of the ship is 12000 tonnes + 200 tonnes = 12200 tonnes
Moment before = (12000 x 9) + (200 x 12) = 108000 + 2400 = 110400 tonne-meter
Moment after = (12000 x KG) + (200 x 2)12200 KG = 110400 / 12200 KG = 9.01639 m (final KG of ship).
Hence, the final KG of the ship is 9.01639 m.
Learn more about displacement here ;
https://brainly.com/question/29957379
#SPJ11
Find the energy of the following. Express your answers in units of electron volts, noting that 1 eV = 1.60 10-19 J.
(a) a photon having a frequency of 2.20e17 Hz
=_______ eV
(b) a photon having a wavelength of 7.40e2 nm
=___________ eV
The energy of the photon having a frequency of 2.20e17 Hz is 9.10 eV. The energy of the photon having a wavelength of 7.40e2 nm is 16.8 eV. The energy of a photon is determined by its frequency (ν) or wavelength (λ).
The relation between the energy and frequency of a photon is given as, E = hf. The frequency of a photon, f = 2.20 x 10^17 Hz= 2.20 x 10^17 s^(-1), Planck's constant, h = 6.626 x 10^(-34) Js. So, the energy of a photon can be calculated as, E = hf= 6.626 x 10^(-34) J s x 2.20 x 10^17 s^(-1)= 1.46 x 10^(-16) J. Energy of a photon in electron volts, E = E (J) / (1.60 x 10^(-19) J/eV)= (1.46 x 10^(-16) J) / (1.60 x 10^(-19) J/eV)= 9.10 eV. Therefore, the energy of the photon having a frequency of 2.20e17 Hz is 9.10 eV. The relation between the energy and wavelength of a photon is given as, E = hc/λ. The wavelength of a photon, λ = 7.40 x 10^(-7) m= 7.40 x 10^(-2)cm, Planck's constant, h = 6.626 x 10^(-34) Js, Speed of light, c = 3 x 10^8 m/s= 3 x 10^10 cm/s. So, the energy of a photon can be calculated as, E = hc/λ= 6.626 x 10^(-34) J s x 3 x 10^10 cm/s / (7.40 x 10^(-7) m)= 2.68 x 10^(-15) J. Energy of a photon in electron volts, E= E (J) / (1.60 x 10^(-19) J/eV)= (2.68 x 10^(-15) J) / (1.60 x 10^(-19) J/eV)= 16.8 eV. Therefore, the energy of the photon having a wavelength of 7.40e2 nm is 16.8 eV.
Read more about energy of the photon. https://brainly.com/question/3764691 #SPJ11
Q 2. 500 kg/hr of steam drives turbine. The steam enters the turbine at 44 atm and 450°C at a linear velocity of 60 m/s and leaves at a point 5m below the turbine inlet at atmospheric pressure and a velocity of 360 m/s. The turbine delivers shaft work at a rate 30 kw and heat loss from the turbine is estimated to be 104 kcal/h. a. Sketch the process flow diagram (1 mark) b. Calculate the specific enthalpy change of the process (7 marks)
The specific enthalpy change of the process is -3080 kJ/kg.
The specific enthalpy change of the process can be calculated using the formula:
Δh = h2 - h1
Where Δh is the specific enthalpy change, h2 is the specific enthalpy at the turbine outlet, and h1 is the specific enthalpy at the turbine inlet.
To calculate the specific enthalpy change, we need to determine the specific enthalpy values at the turbine inlet and outlet. We can use steam tables or thermodynamic properties of steam to find these values.
Given:
- Steam enters the turbine at 44 atm and 450°C.
- Steam leaves the turbine at atmospheric pressure.
- Turbine delivers shaft work at a rate of 30 kW.
- Heat loss from the turbine is estimated to be 104 kcal/h.
Using the provided information, we can determine the specific enthalpy values at the turbine inlet and outlet. We can then calculate the specific enthalpy change using the formula mentioned earlier.
Learn more about the calculations involved in determining the specific enthalpy change of the process.
An airplane in a holding pattern flies at constant altitude along a circular path of radius 3.26 km. If the airplane rounds half the circle in 180 s, determine the following. (a) Determine the magnitude of the airplane's displacement during the given time (in m ). m (b) Determine the magnitude of the airplane's average velocity during the given time (in m/s ). m/s (c) What is the airplane's average speed during the same time interval (in m/s )? m/s
Given data:The airplane flies at a constant altitude along a circular path of radius `r = 3.26 km`
The airplane rounds half the circle in `t = 180 s`
Part (a) Magnitude of the airplane's displacement during the given time:
The displacement is given by the difference between the initial and final positions of the airplane.
Displacement `s = 2r` (since the airplane rounds half the circle)Displacement `s = 2 × 3.26 km`Displacement `s = 6.52 km`We know that `1 km = 1000 m`.
Hence,Displacement `s = 6.52 km × 1000 m/km`Displacement `s = 6520 m`Therefore, the magnitude of the airplane's displacement during the given time is `6520 m`.
Part (b) Magnitude of the airplane's average velocity during the given time:
Average velocity `v` is given by the ratio of the displacement and time.
Average velocity `v = s/t`Average velocity `v = 6520 m/180 s`Average velocity `v = 36.22 m/s`
The magnitude of the airplane's average velocity during the given time is `36.22 m/s`.
Part (c) Magnitude of the airplane's average speed during the given time:
Average speed is given by the ratio of the total distance covered by the airplane and time.Average speed `v_ave = d/t`We know that the total distance covered by the airplane is the circumference of the circle.
Total distance `d = 2πr`Total distance `d = 2π × 3.26 km`Total distance `d = 20.49 km`Converting km to m,Total distance `d = 20.49 km × 1000 m/km`Total distance `d = 20,490 m`Average speed `v_ave = d/t`Average speed `v_ave = 20,490 m/180 s`Average speed `v_ave = 113.83 m/s`
The airplane's average speed during the given time interval is `113.83 m/s`.
Hence, the magnitudes of the airplane's displacement, average velocity, and average speed during the given time are `6520 m`, `36.22 m/s`, and `113.83 m/s` respectively.
To know more about altitude visit:
https://brainly.com/question/31017444
#SPJ11
4. What happens to the width of the central maximum in a single-slit diffraction if the slit width is increased? 5. In a single-slit diffraction, what happens to the intensity pattern if the slit width becomes narrower and narrower?
(4) The width of the central maximum in a single-slit diffraction decreases when the slit width is increased.
(5) In a single-slit diffraction, the intensity pattern becomes more pronounced and exhibits sharper fringes when the slit width becomes narrower and narrower.
(4) In a single-slit diffraction experiment, the width of the central maximum is directly related to the slit width. As the slit width increases, the central maximum becomes wider. This is because a wider slit allows for more diffraction, resulting in a broader central maximum.
(5) The intensity pattern in a single-slit diffraction experiment is determined by the interference of light waves passing through the slit. When the slit width becomes narrower and narrower, the interference becomes more pronounced and distinct. The intensity pattern exhibits sharper fringes and greater contrast between bright and dark regions. This is because a narrower slit restricts the passage of light, leading to a greater deviation of light waves and more pronounced interference effects.
To illustrate this, consider the equation for the intensity pattern in a single-slit diffraction, given by I(θ) = ([tex]A^2)[/tex]([tex]sin^2(\beta )[/tex])/([tex]\beta ^2[/tex]), where A is the amplitude of the wave and β is the phase difference between light waves. As the slit width decreases, the value of β increases, resulting in a larger denominator and smaller values of[tex]\beta ^2[/tex]. This leads to sharper fringes and a more distinct intensity pattern.
In summary, when the slit width is increased in a single-slit diffraction experiment, the width of the central maximum increases. Conversely, when the slit width becomes narrower, the intensity pattern exhibits sharper fringes and greater contrast between bright and dark regions.
Learn more about diffraction here:
brainly.com/question/12290582
#SPJ11
Two point charges of equal magnitude are 7.0 cm apart. At the midpoint of the line connecting them, their combined electric field has a magnitude of 48 Part A N/C. Find the magnitude of the charges. Express your answer using two significant figures.
The answer to this question is that the magnitude of the charges is 1.3 μC.
To find the magnitude of the charges, we can use the formula for the electric field due to a point charge:
E = k * (|q1| / r1^2) + k * (|q2| / r2^2)
where E is the combined electric field at the midpoint, k is the electrostatic constant (8.99 x 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the charges, and r1 and r2 are the distances from the charges to the midpoint.
Given that the charges are of equal magnitude and the electric field at the midpoint has a magnitude of 48 N/C, we can set up the equation as follows:
48 N/C = k * (|q| / (0.035 m)^2) + k * (|q| / (0.035 m)^2)
Simplifying the equation, we get:
48 N/C = 2 * k * (|q| / (0.035 m)^2)
Dividing both sides of the equation by 2k and rearranging, we have:
(|q| / (0.035 m)^2) = 48 N/C / (2 * k)
Solving for |q|, we find:
|q| = (48 N/C / (2 * k)) * (0.035 m)^2
Plugging in the values for k (8.99 x 10^9 N m^2/C^2) and the distance (0.035 m), we can calculate:
|q| = (48 N/C / (2 * (8.99 x 10^9 N m^2/C^2))) * (0.035 m)^2
Simplifying the equation, we get:
|q| ≈ 1.3 μC
Therefore, the magnitude of the charges is approximately 1.3 μC.
Learn more about Magnitude
brainly.com/question/31022175
#SPJ11
Three capacitors of 2, 3 and 6 μF, are connected in series, to a
10 V source. The charge on the 3 μF capacitor, in μC, is:
Group of answer choices
D. 110
E. 11
A. 10
B. 1
C. 30
Three capacitors of 2, 3, and 6 μF, are connected in series, to a 10 V source. The charge on the 3 μF capacitor, in μC, is 30 μC (Option C).
We can calculate the charge on the 3μF capacitor using the capacitance formula Q = CV. Given that three capacitors of 2, 3, and 6μF are connected in series to a 10 V source, the equivalent capacitance of the capacitors can be calculated as follows;
1/Ceq = 1/C1 + 1/C2 + 1/C3
Therefore;
1/Ceq = 1/2 + 1/3 + 1/6= 3/6 + 2/6 + 1/6= 6/6= 1F
The equivalent capacitance is 1μF. Now we can use the charging formula;
Q = CV
The voltage across all capacitors is 10 V since they are in series. We can, therefore, calculate the charge on the 3μF capacitor as follows;
Q3 = C3V= 3μF * 10 V= 30 μC
Therefore, the charge on the 3μF capacitor is 30 μC. Hence, the correct answer is option C.
You can learn more about capacitors at: brainly.com/question/31627158
#SPJ11
A person is running in a straight line when you measure their velocity. The x-component of the velocity vector is 1.3 m/s2 and the y-component of the velocity vector is -1.4 m/s2.
What is the direction (angle in degrees) of the resultant velocity vector with respect to the + x‐axis? Remember to account for sign in your answer.
Velocity is defined as the rate of change of displacement. It's a vector quantity that specifies both speed and direction. The x-component of the velocity vector is 1.3 m/s², and the y-component of the velocity vector is -1.4 m/s².
To determine the direction of the resultant velocity vector with respect to the + x‐axis, we need to calculate the angle made by the vector with the x-axis.
The tangent of the angle is the ratio of the y-component of the velocity to the x-component of the velocity.
tan θ = (-1.4 m/s²) / (1.3 m/s²)
θ = tan⁻¹ (-1.4/1.3)
θ = -49.78°
Therefore, the direction of the resultant velocity vector with respect to the + x‐axis is -49.78°.
Note: The negative sign in the answer represents that the angle is measured clockwise from the + x-axis.
To know more about displacement visit :
https://brainly.com/question/11934397
#SPJ11
How long will it take to charge a capacitor of capacitance 5×10
−5
F to 90% of its full capacity using a charging circui of resistance of 5Ω and a battery of voltage 100 V. B) Consider a simple single-loop circuit containing a battery of voltage 10 V, a resistor of resistance 10Ω, an inductor of inductance 0.0005H, and a switch. How long will it take for the current in the circuit to reach 95% of its final maximum value?
A) It will take approximately 0.081 seconds to charge the capacitor to 90% of its full capacity. B) It will take approximately 0.105 seconds for the current in the circuit to reach 95% of its final maximum value.
A) To determine the time it takes to charge a capacitor to 90% of its full capacity, we can use the formula for the charging of a capacitor in an RC circuit:
t = -RC ln(1 - V÷V₀)
where t is the time, R is the resistance, C is the capacitance, V is the final voltage (90% of the full capacity), and V₀ is the initial voltage (0V).
Given:
Capacitance (C) = 5×[tex]10^{-5}[/tex] F
Resistance (R) = 5 Ω
Final voltage (V) = 0.9 (maximum voltage capacity)
Initial voltage (V₀) = 0V (since the capacitor is initially uncharged)
We can calculate the time as follows:
t = -(5 Ω) (5×[tex]10^{-5}[/tex] F) ln(1 - 0.9)
t ≈ 0.081 seconds
Therefore, it will take approximately 0.081 seconds to charge the capacitor to 90% of its full capacity.
B) To determine the time it takes for the current in the circuit to reach 95% of its final maximum value, we can use the formula for the current in an RL circuit:
I(t) = (V÷R) (1 - ([tex]e^{\frac{-t}{τ} }[/tex]))
where I(t) is the current at time t, V is the voltage, R is the resistance, τ is the time constant (L/R), and e is the base of the natural logarithm.
Given:
Voltage (V) = 10 V
Resistance (R) = 10 Ω
Inductance (L) = 0.0005 H
Final maximum value of current (I) = 0.95 (maximum current value)
We need to find the time (t) when the current reaches 95% of its final maximum value (0.95I):
0.95I = (10 V ÷ 10 Ω) (1 - [tex]e^{\frac{-t/0.0005 H}{10 ohm} }[/tex] )
0.95 = 1 - [tex]e^{\frac{2t}{0.0005} }[/tex]
Rearranging the equation:
[tex]e^{\frac{2t}{0.0005} }[/tex] = 0.05
Taking the natural logarithm of both sides:
-2t÷0.0005 = ln(0.05)
Solving for t:
t ≈ -0.0005 ln(0.05) ÷ 2
Using a calculator, we find:
t ≈ 0.105 seconds
Therefore, it will take approximately 0.105 seconds for the current in the circuit to reach 95% of its final maximum value.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
6. A object weighing 30 N in air weigh 24.5 N when immersed in water. If the density of water is 1000 kg/m^3, what is the density of the object.
The density of the object is 53497 kg/m^3.
To solve this problem, we can use the concept of buoyancy and the relationship between the weight of an object, the weight of the displaced fluid, and the density of the object.
Given:
Weight of the object in air = 30 N
Weight of the object in water = 24.5 N
Density of water = 1000 kg/m^3
Let's denote the volume of the object as V (in m^3) and the density of the object as ρ (in kg/m^3).
When the object is immersed in water, it experiences an upward buoyant force equal to the weight of the water it displaces. According to Archimedes' principle, this buoyant force is equal to the weight difference between the object in air and in water:
Buoyant force = Weight of the object in air - Weight of the object in water
Substituting the given values:
Buoyant force = 30 N - 24.5 N
Buoyant force = 5.5 N
The buoyant force is also equal to the weight of the fluid displaced by the object, which can be calculated using the formula:
Buoyant force = Density of the fluid * Volume of the object * g
Substituting the given values for the density of water and the volume of the object, we have:
5.5 N = 1000 kg/m^3 * V * 9.8 m/s^2
Simplifying the equation, we find:
V = 5.5 N / (1000 kg/m^3 * 9.8 m/s^2)
V ≈ 0.000561 m^3
Now, we can determine the density of the object by dividing its weight in air by its volume:
ρ = Weight of the object in air / Volume of the object
ρ = 30 N / 0.000561 m^3
Calculating the density, we have:
ρ ≈ 53497 kg/m^3
Therefore, the density of the object is approximately 53497 kg/m^3.
Learn more about density from the given link
#SPJ11
The coefficient of performance of an air conditioner is 2.5. The
work done by the motor is 60 J. How much energy is removed from the
room it cools?
a.
250J
b.
120J
c.
160J
d.
150J
The amount of energy removed from the room by the air conditioner is 150J (option d).
To decide how much energy eliminated from the room by the climate control system, we can utilize the coefficient of performance (COP) and the work done by the engine.
The coefficient of execution (COP) is characterized as the proportion of the intensity moved (energy eliminated) from the space to the work done by the engine. For this situation, the COP is given as 2.5.
COP = Intensity Moved/Work Done
We are given that the work done by the engine is 60 J. Utilizing the COP equation, we can modify it to settle for the intensity moved:
Heat Moved = COP * Work Done
Subbing the given qualities:
Heat Moved = 2.5 * 60 J = 150 J
Subsequently, how much energy eliminated from the room by the forced air system is 150 J. The right response is d. 150J.
To learn more about coefficient of performance (COP), refer:
https://brainly.com/question/14182691
#SPJ4
A fluid in a fire hose with a 42.2 mm radius, has a velocity of 0.61 m/s. Solve for the power, hp, available in the jet at the nozzle attached at the end of the hose if its diameter is 21.18 mm. Express your answer in 4 decimal places.
The power available in the jet at the nozzle attached at the end of the hose is approximately 0.000043 hp (to 4 decimal places).
The power available in the jet at the nozzle attached at the end of the hose can be calculated using the following formula:
[tex]( P = \frac{1}{2}\rho v^2 A )[/tex]
where ( P ) is the power, ( \rho ) is the density of the fluid, ( v ) is the velocity of the fluid, and ( A ) is the cross-sectional area of the nozzle.
The density of water is approximately 1000 kg/m³.
The cross-sectional area of the hose can be calculated using the following formula:
[tex]( A = \pi r^2 = \pi (0.0422\text{ m})^2 = 0.0056\text{ m}^2 )[/tex]
The cross-sectional area of the nozzle can be calculated using the following formula:
[tex]( A = \pi r^2 = \pi (0.02118\text{ m})^2 = 0.00141\text{ m}^2 )[/tex]
Using these values and the given velocity of 0.61 m/s, we get:
[tex]( P = \frac{1}{2}\rho v^2 A = \frac{1}{2}(1000\text{ kg/m}^3)(0.61\text{ m/s})^2(0.00141\text{ m}^2) = 0.0318\text{ W} )[/tex]
To convert watts to horsepower, we can use the following conversion factor:
1 hp = 746 W
Therefore, we get:
[tex]( P_{hp} = \frac{P}{746} = \frac{0.0318\text{ W}}{746\text{ W/hp}} = 4.26\times10^{-5}\text{ hp} )[/tex]
Therefore, the power available in the jet at the nozzle attached at the end of the hose is approximately 0.000043 hp (to 4 decimal places).
To know more about power
https://brainly.com/question/1634438
#SPJ4
The Clausius-Clapeyron relation predicts that for every 1 K increase in surface temperature, assuming relative humidity and near-surface wind speeds are fixed, the evaporation from the surface will increase by approximately 7%. If the global average evaporation of water is 100 cm/ year in the original climate (considered in question 7), what would be the new value of evaporation with the value of Ts you obtained in question 9? Express your answer in units of cm/ year rounded to the nearest 1 cm/ year.
Based on your answer to question 9, what are the values of global mean precipitation for the original climate (considered in question 7) and the perturbed climate (considered in question 9)? Express your answers in units of cm/ year rounded to the nearest 1 cm/ year.
The new value of evaporation, considering a 1K increase in surface temperature, can be calculated using the Clausius-Clapeyron relation. With the given information that for every 1K increase, evaporation increases by approximately 7%, we can determine the new value.
From Question 9, the surface temperature (Ts) was obtained. Let's assume that Ts is the original temperature. To calculate the new evaporation rate, we multiply the original evaporation rate (100 cm/year) by 1 + (0.07 × ΔT), where ΔT is the change in temperature.
For example, if the change in temperature (ΔT) from the original climate is 2K, the new evaporation rate would be:
New evaporation rate = 100 cm/year × {1 + (0.07 × 2)} = 114 cm/year.
Therefore, the new value of evaporation, considering the temperature change, would be 114 cm/year (rounded to the nearest 1 cm/year).
Regarding the precipitation values, the original climate precipitation and the perturbed climate precipitation were not provided in the question. Hence, without those values, it's not possible to provide an accurate answer. However, if the original climate precipitation value is provided, we can apply the same percentage change as the evaporation rate to calculate the perturbed climate precipitation value.
Learn more about the Clausius-Clapeyron relation at:
https://brainly.com/question/33369944
#SPJ11
When two waves are out of phase, this means that the waves travel further by one wavelength crest overlaps crest crest overlaps trough trough overlaps trough the waves travel further by quarter of a wavelength Question 8 ( 1 point) As the distance between the slits increases, the distance between the dark fringes decreases. True False
The given statement " As the distance between the slits increases, the distance between the dark fringes decreases. " is False because,
As the distance between the slits increases, the distance between the dark fringes actually increases, rather than decreases. This phenomenon can be understood by considering the principles of interference in waves.
When light passes through multiple slits, such as in a double-slit experiment, it forms an interference pattern on a screen. The interference pattern consists of alternating bright and dark fringes.
The bright fringes occur where the waves from the two slits constructively interfere, resulting in a maximum intensity of light.
The dark fringes, on the other hand, occur where the waves from the two slits destructively interfere, resulting in a minimum intensity or complete darkness.
The distance between adjacent dark fringes, known as the fringe spacing or fringe separation, depends on the wavelength of the light and the distance between the slits. Mathematically, the fringe spacing can be calculated using the formula:
dsin(theta) = mlambda
where d is the distance between the slits, theta is the angle of the fringe from the central maximum, m is the order of the fringe, and lambda is the wavelength of the light.
We can see that as the distance between the slits (d) increases, the fringe spacing also increases, resulting in a greater distance between the dark fringes.
The statement that the distance between the dark fringes decreases as the distance between the slits increases is false.
To know more about dark fringes refer here
https://brainly.com/question/31576174#
#SPJ11
In the circuit shown 12 = 2 A and 13= 1.1 A. The value of (in V) is 62 빠 I NII 52, 3 w E2 We R |
The value of (in V) is 50.
In the given circuit, the current passing through resistor 12 is 2 A, and the current passing through resistor 13 is 1.1 A. We are asked to find the value of (in V), which represents the voltage drop across resistor 11.
To determine the voltage drop across resistor 11, we can apply Ohm's Law, which states that the voltage (V) across a resistor is equal to the current (I) passing through it multiplied by the resistance (R). In this case, we know the current passing through resistor 12 (2 A) and resistor 13 (1.1 A), but we don't have the resistance values.
To find the value of (in V), we need to consider the concept of parallel resistors. When resistors are connected in parallel, the voltage across each resistor is the same. Therefore, the voltage drop across resistor 11 would be equal to the voltage drop across either resistor 12 or resistor 13.
Since we are given the current passing through each resistor, we can use Ohm's Law to calculate the voltage drops across resistors 12 and 13. Let's assume the resistance of resistor 12 is R12 and the resistance of resistor 13 is R13.
Using Ohm's Law, the voltage drop across resistor 12 can be calculated as V12 = I12 * R12, and the voltage drop across resistor 13 can be calculated as V13 = I13 * R13. However, we don't have the resistance values to directly calculate the voltage drops.
Therefore, we need more information or additional equations to determine the resistance values and subsequently calculate the voltage drop across resistor 11. Without further details or equations, we cannot find the exact value of (in V).
Learn more about Value
brainly.com/question/30145972
#SPJ11
which term refers to energy due to an object's motion
The term that refers to energy due to an object's motion is called Kinetic energy.
Kinetic energy is the energy of motion of an object. It is directly proportional to its mass and velocity. In simpler terms, the faster an object moves and the more mass it has, the more kinetic energy it possesses.
Mathematically, the formula for kinetic energy can be expressed as KE = 1/2 mv²
Where KE is the kinetic energy, m is the mass of the object and v is its velocity or speed. The unit of kinetic energy is Joules (J). Examples of Kinetic Energy. Some of the common examples of kinetic energy include.
An airplane in flight . A speeding bullet A moving car A falling object A ball that has been thrown or hit A windmill in motion water flowing in a reverse movement of electrons, protons, neutrons, and atoms.
To know more about Kinetic Energy please refer to:
https://brainly.com/question/999862
#SPJ11
A potential difference of 0.800 V is needed to provide a large current for arc welding. The potential difference across the primary of a step-down transformer is 161 V. How many turns must be on the primary for each turn on the secondary?
Each turn on the primary must have 0.005 V.
In order to determine the number of turns required on the primary for each turn on the secondary, we need to compare the potential differences across the primary and the desired potential difference for arc welding.
We are given that a potential difference of 0.800 V is needed for arc welding, and the potential difference across the primary of the step-down transformer is 161 V. To find the ratio of turns, we can divide the potential difference across the primary by the desired potential difference for arc welding:
161 V / 0.800 V = 201.25
This result tells us that for each turn on the secondary, there must be approximately 201.25 turns on the primary. However, the requested answer is the number of turns on the primary for each turn on the secondary. To calculate this, we take the reciprocal of the above result:
1 / 201.25 = 0.0049691
Hence, each turn on the primary must have approximately 0.0049691 V.
Learn more about Turn
brainly.com/question/28340063
#SPJ11
2) A Nebraska Cornhusker football player runs in for a touchdown and inadvertently hits the padded goalpost. At the time of the collision he was running at a velocity of 7.50 m/s and came to a full-stop after compressing the goalpost padding (and his uniform padding) by .350 meters. a) What was his deacceleration? b) How long does the collision last?
The player experiences a deceleration of approximately 80.36 m/s² when colliding with the goalpost padding and comes to a full-stop. The collision lasts for approximately 0.0933 seconds.
a) To find the deceleration, we can use the equation of motion:
v² = u² + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Since the player comes to a full-stop, the final velocity is 0 m/s, the initial velocity is 7.50 m/s, and the displacement is -0.350 m (taking the direction of compression as negative).
0² = (7.50)² + 2a(-0.350)
Simplifying the equation:
0 = 56.25 - 0.70a
Rearranging the terms:
0.70a = 56.25
a = 56.25 / 0.70
a ≈ 80.36 m/s²
Therefore, the deceleration of the player is approximately 80.36 m/s².
b) To find the time duration of the collision, we can use the equation:
v = u + at
where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.
Since the player comes to a full-stop, the final velocity is 0 m/s, the initial velocity is 7.50 m/s, and the acceleration is -80.36 m/s² (taking deceleration as negative).
0 = 7.50 + (-80.36)t
Rearranging the terms:
80.36t = 7.50
t ≈ 0.0933 seconds
Therefore, the collision lasts approximately 0.0933 seconds.
To know more about deceleration refer to-
https://brainly.com/question/18417367
#SPJ11
How much greater is the light collecting area of a 4m telescope than that of a 1 meter telescope?
a. 4
b. 8
c. 12
d. 16
The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Hence, the correct option is D.
The light collecting area of a telescope is directly proportional to the square of its diameter. Therefore, to compare the light collecting areas of a 4m telescope and a 1m telescope:
Light collecting area of a 4m telescope = [tex](4m)^2[/tex] = 16[tex]m^{2}[/tex]
Light collecting area of a 1m telescope = [tex](1m)^2[/tex] = 1[tex]m^{2}[/tex]
The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Therefore, The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Hence, the correct option is D.
To know more about telescope here
https://brainly.com/question/19349900
#SPJ4
Derive temperature distribution in a tube wall. Outer surface (at r=ra) is thermally insulated, while inner surface (n.) has constant temperature T
The temperature distribution in a tube wall refers to how the temperature varies across the thickness of the wall. in a tube wall, temperature distribution can be given as T(r, t) = R(r) Θ(t).
To derive the temperature distribution in a tube wall, we can use the heat conduction equation in cylindrical coordinates. The equation is:
∂²T/∂r² + (1/r) ∂T/∂r = (1/α) ∂T/∂t,
where T is the temperature, r is the radial coordinate, α is the thermal diffusivity, and t is the time.
Since the outer surface of the tube wall is thermally insulated, there is no heat transfer across that surface. This implies that the heat flux at r = ra is zero:
(-k) (dT/dr) |(at r=ra) = 0,
where k is the thermal conductivity.
Additionally, since the inner surface of the tube wall has a constant temperature T, we can set:
T(r=0) = [tex]T_{inner[/tex].
To solve this differential equation subject to the given boundary conditions, we can assume a separation of variables solution of the form:
T(r, t) = R(r) Θ(t).
Plugging this into the heat conduction equation, we get:
(R''/R) + (1/r)(R'/R) = (1/(αΘ))(Θ'/Θ) = -λ²,
where λ is the separation constant.
Simplifying, we have:
(zR'' + R')/R = λ²,
and
(Θ'/Θ) = -λ²α,
which gives us two separate ordinary differential equations (ODEs):
rR'' + R' - λ²R = 0, (1)
Θ'/Θ = -λ²α. (2)
Solving equation (2), we have:
Θ(t) = C exp(-λ²αt),
where C is a constant determined by the initial conditions.
Next, let's solve equation (1). This is a second-order linear ODE, and its solution depends on the specific boundary conditions and geometry of the tube wall. Different boundary conditions would result in different solutions.
Once we solve equation (1) and obtain the solution R(r), we can express the general solution for the temperature distribution as:
T(r, t) = R(r) Θ(t).
In the equation T(r, t) = R(r) Θ(t):
T(r, t) represents the temperature at a specific radial position (r) and time (t) within the tube wall.
R(r) represents the radial part of the temperature distribution. It describes how the temperature varies in the radial direction of the tube wall.
Θ(t) represents the time-dependent part of the temperature distribution. It describes how the temperature changes over time.
Learn more about temperature distribution here:
https://brainly.com/question/33346371
#SPJ11
1. Semi-diurnal tides have ________ high tide(s) and _________ low tide(s) per day.
a. 2. . . 2
b. 1. . . 1
c. 1. . . 2
d. 2. . . 1
2. Constructive wave interference __________.
a. seldom happens
b. is always happening
c. occurs when wave crests coincide making the resulting wave heights greater than the original wave heights
d. occurs when a wave crest and trough coincide making the resulting wave heights less than the original heights
e. Both b and c are correct.
Semi-diurnal tides have _2_ high tide(s) and _2_ low tide(s) per day. (option a). Constructive wave interference occurs when wave crests coincide making the resulting wave heights greater than the original wave heights. (option c).
Semi-diurnal tides are one of the many types of tides. These tides have two high tides and two low tides each day, with a time gap of about 12 hours and 25 minutes between each.
Constructive wave interference _occurs when wave crests coincide making the resulting wave heights greater than the original wave heights_.Wave interference is the phenomenon in which two waves combine to form a resultant wave of greater, lower, or the same amplitude as the original waves. When the waves' crests coincide, they add up, resulting in larger wave heights than either of the original waves, known as constructive wave interference.
Hence option a and c are the correct answers respectively.
Learn more about Semi-diurnal tides at https://brainly.com/question/28098307
#SPJ11
A proton traveling at 4.38 × 105 m/s moves into a
uniform 0.040-T magnetic field. What is the radius of the proton's
resulting orbit?
The radius of the proton's resulting orbit can be calculated using the equation (mv) / (qB), where m is the mass of the proton, v is its velocity, q is its charge, and B is the magnetic field strength. By substituting the given values and solving the equation, we can determine the radius of the orbit.
To find the radius of the proton's resulting orbit, we can use the equation for the centripetal force experienced by a charged particle moving in a magnetic field:
F = qvB
where F is the centripetal force, q is the charge of the proton, v is its velocity, and B is the magnetic field strength. The centripetal force is provided by the magnetic force acting on the proton. The magnetic force is given by:
F = qvB = [tex](mv^2[/tex]) / r
where m is the mass of the proton and r is the radius of the orbit. Rearranging the equation, we can solve for r:
r = (mv) / (qB)
Substituting the given values of the proton's velocity, mass, charge, and the magnetic field strength, we can calculate the radius of the proton's resulting orbit.
To know more about centripetal force refer to-
https://brainly.com/question/14021112
#SPJ11