A house is 57.0ft ieng and 38.0ft wide and has B.0-ft-high celings. What is the volume of the interioe of the house in cubic meters and cubic centimeters? m3

The equivalent pressure of 968 mm Hg in units of atm is B) 0.785 atm.

Given that the pressure is 968 mmHg which we need to convert to atm.

To do the conversion, we need to know the value of 1 atm in terms of mmHg or torr.

The conversion factor of 1 atm to mmHg or torr is 760 mmHg.

So, to convert from mmHg to atm, divide the value in mmHg by 760.

Therefore, the equivalent pressure of 968 mm Hg in units of atm is given by;0.785 atm

So, the correct option is B) 0.785 atm.

For conversion from mmHg to atm: 1 atm = 760 mmHg (or torr)

Divide both sides by 760 mmHg (or torr) to get;

1 atm/760 mmHg = 1mmHg/1 atm

1 atm = 760 mmHg (or torr)

Divide by 760;

968 mmHg / 760 mmHg/atm = 1.27 atm

So, the answer is 1.27 atm, which is not in the options.

Thus, the correct option is B) 0.785 atm.

Learn more about the pressure from the given link-

https://brainly.com/question/24719118

#SPJ11

The option that does not represent a characteristic of a pure substance is:

C) It is made up of different types of particles.

A pure substance is a material that consists of only one type of particle, either atoms of an element or molecules of a compound. It does not contain different types of particles. This is what distinguishes a pure substance from a mixture, which is composed of two or more different substances mixed together.

Option A states that a pure substance has a uniform texture throughout, which means it is homogeneous. This is true because pure substances have a consistent composition and properties throughout.

Option B states that a pure substance has a fixed boiling point or melting point. This is also true because pure substances have well-defined temperature ranges at which they transition between solid, liquid, and gas phases.

Option D states that a pure substance can be an element or a compound. This is true as well because pure substances can exist as either single elements or compounds consisting of two or more elements chemically bonded together.

In summary, the correct option is C, as a pure substance does not consist of different types of particles.

learn more about pure substance Here:

https://brainly.com/question/24462192

#SPJ11

Answer: d) is correct

Explanation:

a) burning trees creates more carbon emissions

b) dead trees cannot turn co2 into oxygen and destroying them releases co2 in wood and soil

c) transpiration from plants creates 10% of the atmosphere's moisture, the rest being oceans, rivers and lakes

The amount of a 1.5% ointment could you make with 43gm of hydrocortisone powder is 23.11 gm.

To determine the grams of a 1.5% ointment that can be made from 43gm of hydrocortisone powder, we need to use the concept of percent concentration. We are given:

We can use the following formula to solve this problem:

C₁V₁ = C₂V₂

where:

C₁ = concentration of a stock solution (hydrocortisone powder) = ?

V₁ = volume of stock solution = 43g

C₂ = concentration of the final solution (ointment) = 1.5% = 0.015 (decimal form)

V₂ = volume of the final solution (ointment) = m₂

First, we need to find the volume of the stock solution that would contain 43gm of hydrocortisone powder. The density of hydrocortisone powder is 1.24 g/mL. Hence, the volume of the stock solution is:

Volume of stock solution (V₁) = mass of powder / density

= 43 g / 1.24 g/mL = 34.67 mL

Now, we can use the formula to find the volume of the ointment that can be prepared:

C₁V₁ = C₂V₂

34.67 × 0.01 = 0.015V₂

V₂ = 34.67 × 0.01 / 0.015

= 23.11 gm

So, 43 gm of hydrocortisone powder can make 23.11 gm of a 1.5% ointment.

Learn more about hydrocortisone: https://brainly.com/question/2970095

#SPJ11

Seismogram 2 was closest to the earthquake's epicenter. The time interval between P and S waves provides an estimate of the distance from the seismograph station to the earthquake epicenter.

Smaller time intervals indicate closer proximity. In this case, Seismogram 2 has the smallest time interval of 1 minute (P = 2:14pm, S = 2:15pm), suggesting it is closer to the epicenter compared to the other seismograms. Seismogram 1 has a time interval of 3 minutes (P = 2:15pm, S = 2:18pm), indicating it is farther from the epicenter. Seismogram 3 has a time interval of 4 minutes (P = 2:17pm, S = 2:21pm), suggesting it is farther from the epicenter compared to Seismogram 2.

Learn more about Seismogram here:

https://brainly.com/question/1747723

#SPJ11

The change in entropy of 1.00 m³ of water at 0°C when it is frozen into ice at the same temperature is -22.02 J/K.

To calculate the change in entropy, we can use the equation:

ΔS = ΔH/T

When water freezes, it undergoes a phase transition from liquid to solid. The enthalpy change during this phase transition is known as the heat of fusion (ΔH_fus). For water, the heat of fusion is approximately 333.5 J/g.

To calculate the change in entropy for 1.00 m³ of water, we need to convert the mass of water to grams. The density of water at 0°C is approximately 1000 kg/m³, so 1.00 m³ of water is equivalent to 1000 kg.

Using the given values and the equation for change in entropy, we have:

ΔH_fus = 333.5 J/g (heat of fusion of water)

mass = 1.00 m³ * 1000 kg/m³ = 1000 kg (mass of water)

T = 0°C + 273.15 = 273.15 K (temperature in Kelvin)

ΔS = (ΔH_fus * mass) / T

= (333.5 J/g * 1000 kg) / 273.15 K

≈ -22.02 J/K

learn more about entropy here:

https://brainly.com/question/32484278

#SPJ4

HC and CO are high and CO₂ and O₂ are low. This could be caused by a rich mixture.

A) rich mixture

If HC (hydrocarbons) and CO (carbon monoxide) levels are high, while CO₂ (carbon dioxide) and O₂ (oxygen) levels are low, it suggests a condition known as a "rich mixture" in the combustion process. A rich mixture refers to an air-fuel mixture in which there is an excess of fuel compared to the amount of air required for complete combustion.

When the fuel-air mixture is rich, it means that there is more fuel available relative to the available oxygen for combustion. This imbalance can occur due to several reasons, such as:

1. Incorrect fuel-to-air ratio: The air-fuel mixture may be adjusted incorrectly, with too much fuel being supplied relative to the amount of air. This can occur due to a malfunctioning fuel injection system.

2. Malfunctioning sensors: The sensors responsible for measuring the oxygen and fuel levels in the exhaust gases, such as the oxygen sensor or air-fuel ratio sensor, may be faulty or contaminated. This can result in inaccurate readings and improper adjustment of the fuel mixture.

3. Clogged air intake or fuel injectors: If the air intake or fuel injectors are clogged, it can disrupt the proper mixing of fuel and air, leading to a rich mixture.

The consequences of a rich mixture include:

High HC levels: A rich mixture results in incomplete combustion, leading to unburned hydrocarbon molecules being released into the exhaust gases. This increases the HC levels.

High CO levels: In a rich mixture, there is an excess of fuel. As a result, some of the fuel does not undergo complete combustion and is converted into carbon monoxide (CO). This leads to elevated CO levels.

Low CO₂ levels: Since there is incomplete combustion in a rich mixture, the amount of carbon dioxide (CO₂) produced is reduced.

Low O₂ levels: A rich mixture consumes most of the available oxygen for combustion, resulting in lower levels of oxygen (O₂) in the exhaust gases.

To know more about rich mixture here

https://brainly.com/question/32482229

#SPJ4

The complete question is:

HC and CO are high and CO₂ and O₂ are low. This could be caused by a  ____?

A) rich mixture

B) lean mixture

C) defective ignition component

D) clogged EGR passage

The correct chemical formula for the ionic compound formed when barium combines with nitrogen is (b) Ba3N2.

To determine the correct chemical formula for the ionic compound formed when barium (Ba) combines with nitrogen (N), we need to consider the charges of the ions involved.

Barium (Ba) is an alkaline earth metal located in Group 2 of the periodic table. It tends to lose two electrons to achieve a stable electron configuration, resulting in a 2+ charge (Ba2+).

Nitrogen (N), on the other hand, is a nonmetal located in Group 15 of the periodic table. It typically gains three electrons to achieve a stable electron configuration, resulting in a 3- charge (N3-).

When these ions combine, the charges must balance out to form a neutral compound. Since the 2+ charge of barium cancels out with the 3- charge of nitrogen, we need two barium ions (2x 2+ = 4+) to combine with three nitrogen ions (3x 3- = 9-) to achieve a neutral compound.

Therefore, the correct chemical formula for the ionic compound formed when barium combines with nitrogen is (b) Ba3N2.

Learn more about nitrogen

https://brainly.com/question/1380063

#SPJ11

The molarity of the bleach solution is approximately 0.128 M NaOCl.

To calculate the molarity of a bleach solution, we need to determine the number of moles of sodium hypochlorite (NaOCl) present in the given mass of NaOCl.

Mass of NaOCl = 9.5 g

Volume of bleach solution = 1 liter

First, we need to convert the mass of NaOCl to moles using its molar mass. The molar mass of NaOCl is the sum of the atomic masses of sodium (Na), oxygen (O), and chlorine (Cl).

Molar mass of NaOCl = (22.99 g/mol) + (16.00 g/mol) + (35.45 g/mol) = 74.44 g/mol

Now, we can calculate the number of moles of NaOCl:

Number of moles = Mass / Molar mass

Number of moles = 9.5 g / 74.44 g/mol

Next, we need to calculate the molarity using the number of moles and the volume of the solution:

Molarity (M) = Number of moles / Volume (in liters)

Molarity = (9.5 g / 74.44 g/mol) / 1 L

Now, we can calculate the molarity:

Molarity = 0.1276 mol / L ≈ 0.128 M NaOCl

To know more about molarity  refer to-

https://brainly.com/question/31545539

#SPJ11

1) The number of oxygen atoms produced from 20 g of oxygen is approximately 7.53 x 10²³ atoms.

2) The coefficients that correctly balance the reaction CH₄ + O₂ → H₂O + CO₂ are 1, 2, 1, 1.

3) The actual yield of carbon dioxide when 1000 g of methane reacts to produce 2300 g of carbon dioxide is 2300 g.

4) The theoretical yield of carbon dioxide when 1000 g of methane reacts to produce 2300 g of carbon dioxide is approximately 2750 g.

5) The percentage yield of carbon dioxide in the reaction CH₄ + O₂ → H₂O + CO is approximately 83.64%.

1.

The molar mass of oxygen is approximately 16 g/mol. To determine the number of moles, we divide the mass of oxygen by its molar mass:

Number of moles = mass / molar mass

Number of moles = 20 g / 16 g/mol

Number of moles = 1.25 mol

In one mole of oxygen (O₂), there are 2 moles of oxygen atoms. Therefore, the number of oxygen atoms can be calculated as:

Number of oxygen atoms = number of moles * Avogadro's number

Number of oxygen atoms = 1.25 mol * 6.022 x 10²³ atoms/mol

Number of oxygen atoms = 7.53 x 10²³ atoms

2.

The balanced equation for the reaction is:

CH₄ + 2O₂ → 2H₂O + CO₂

The correct answer is option (d): 1, 2, 1, 1.

3.

The actual yield is the amount of product actually obtained in the reaction. In this case, it is given as 2300 g of carbon dioxide.

The correct answer is option (c): 2300 g CO₂.

4.

The theoretical yield is the maximum amount of product that can be obtained based on the stoichiometry of the balanced equation. To determine the theoretical yield of carbon dioxide, we need to calculate the amount of carbon dioxide that would be produced if all the methane reacted completely.

The molar mass of methane (CH₄) is approximately 16 g/mol. To determine the number of moles of methane, we divide the mass by its molar mass:

Number of moles of CH₄ = mass / molar mass

Number of moles of CH₄ = 1000 g / 16 g/mol

Number of moles of CH₄ = 62.5 mol

From the balanced equation, we see that the stoichiometric ratio between methane (CH₄) and carbon dioxide (CO₂) is 1:1. Therefore, the theoretical yield of carbon dioxide is 62.5 mol.

The molar mass of carbon dioxide (CO₂) is approximately 44 g/mol. To convert the theoretical yield from moles to grams:

Theoretical yield of CO₂ = number of moles of CO₂ * molar mass

Theoretical yield of CO₂ = 62.5 mol * 44 g/mol

Theoretical yield of CO₂ = 2750 g

The correct answer is not provided in the given options.

5.

For the reaction represented by the equation CH₄ + O₂ → H₂O + CO, calculate the percentage yield of carbon dioxide if 1000 g of methane react with excess oxygen to produce 2300 g of carbon dioxide.

Percentage yield is calculated by dividing the actual yield by the theoretical yield and multiplying by 100.

Percentage yield = (actual yield / theoretical yield) * 100

Percentage yield = (2300 g / 2750 g) * 100

Percentage yield ≈ 83.64%

Learn more about theoretical yield from the link given below.

https://brainly.com/question/14966377

#SPJ4

The conversion of solar energy into chemical energy occurs in the process of photosynthesis.

A crucial metabolic activity performed by plants, algae, and some microorganisms is photosynthesis. It entails the absorption of solar energy, its conversion to chemical energy, and its storage as glucose and other organic compounds.

Chlorophyll pigments in the chloroplasts of plant cells absorb sunlight during photosynthesis. Using this energy, a series of chemical processes transform water (H2O) and carbon dioxide (CO2) into glucose (C6H12O6) and oxygen (O2).

Learn more about photosynthesis:

brainly.com/question/29775046

#SPJ4

The molar mass of HNO3 is approximately 63 g/mol (1 hydrogen atom = 1 g/mol, 1 nitrogen atom = 14 g/mol, and 3 oxygen atoms = 48 g/mol). By dividing 6.3 g by the molar mass of HNO3, we find that it contains approximately 0.1 moles of HNO3. Since there are three oxygen atoms in each molecule of HNO3, there are 0.1 moles x 3 oxygen atoms = 0.3 moles of oxygen atoms in 6.3 g of HNO3.

To find the number of oxygen atoms, we first calculate the number of moles of HNO3 in 6.3 g by dividing the given mass by the molar mass of HNO3. The molar mass of HNO3 is the sum of the atomic masses of its constituent elements: 1 hydrogen atom (1 g/mol), 1 nitrogen atom (14 g/mol), and 3 oxygen atoms (16 g/mol each).

Adding them up gives us a molar mass of 63 g/mol for HNO3. Dividing 6.3 g by 63 g/mol gives us approximately 0.1 moles of HNO3.

Since each molecule of HNO3 contains 3 oxygen atoms, we can multiply the number of moles of HNO3 by 3 to find the number of moles of oxygen atoms. Therefore, 0.1 moles of HNO3 x 3 = 0.3 moles of oxygen atoms. This means that in 6.3 g of HNO3, there are approximately 0.3 moles of oxygen atoms.

for such more questions on nitrogen

https://brainly.com/question/1380063

#SPJ8

The electron configuration of an oxide ion O2− is represented by 1s2 2s2 2p6. The oxide ion is formed by the gain of two electrons by an oxygen atom that leads to the completion of the outermost shell of the oxygen atom, and hence it attains the stable electronic configuration of the nearest noble gas, i.e., neon.

The oxide ion is a stable species that is commonly found in many compounds. For example, the oxide ion forms many different salts such as potassium oxide (K2O) and sodium oxide (Na2O), which are commonly used as a source of oxygen in industrial applications. It is also an important component of many minerals and rocks, such as quartz (SiO2) and hematite (Fe2O3).In conclusion, the electron configuration of an oxide ion O2− is 1s2 2s2 2p6, which is attained after the gain of two electrons by an oxygen atom.

know more about oxygen atom.

https://brainly.com/question/7716347

#SPJ11

The systematic name for the compound Ba(NO3)2 is barium nitrate. Barium nitrate is an inorganic salt with the chemical formula Ba (NO3)2. It is a colorless, odorless, and crystalline solid that is highly soluble in water. The compound is formed by combining one atom of barium and two ions of nitrate.

The name “barium” comes from the Greek word “barys,” which means “heavy,” and is a reference to its high density. The term “nitrate” refers to the polyatomic ion NO3-, which is composed of one nitrogen atom and three oxygen atoms. Barium nitrate is commonly used in pyrotechnics, as it is a powerful oxidizing agent that produces a bright green flame when ignited.

The systematic naming of inorganic compounds is based on the rules set out by the International Union of Pure and Applied Chemistry (IUPAC). The name of an ionic compound is composed of the cation name followed by the anion name. In the case of barium nitrate, “barium” is the name of the cation, while “nitrate” is the name of the anion.

Therefore, the systematic name for the compound Ba(NO3)2 is barium nitrate.

Know more about systematic name here:

https://brainly.com/question/1787202

#SPJ11

The total flux through the enclosed surface is zero N⋅m²/C.

When determining the total flux through an enclosed surface, we need to consider the electric field created by each charge and their respective contributions. In this scenario, there are three charges: q₁ = 9q, q₂ = -4q, and q₃ = -q, where q = 3.0 μC.

The electric flux through a closed surface is given by the formula Φ = ∮E · dA, where E represents the electric field and dA is a differential area vector perpendicular to the surface. The integral represents the sum of the dot product between the electric field and the differential area vector over the entire surface.

In this case, the charges are located outside the enclosed surface, and the electric field due to each charge will intersect the surface at different angles. The flux through a closed surface depends on the net electric field passing through it.

Learn more about Flux

brainly.com/question/15655691

#SPJ11

Approximately 0.628 grams of aluminum are required to react with 35 ml of 2.0 M hydrochloric acid.

To determine the grams of aluminum required to react with 35 ml of 2.0 M hydrochloric acid (HCl), we need to consider the stoichiometry of the balanced chemical equation.

The molar ratio between HCl and aluminum (Al) in the balanced equation is 6:2, which means 6 moles of HCl react with 2 moles of aluminum. From the given concentration of HCl (2.0 M) and volume (35 ml), we can calculate the moles of HCl:

moles of HCl = concentration × volume

              = 2.0 M × 0.035 L

              = 0.07 moles

Using the stoichiometry ratio, we can determine the moles of aluminum required:

moles of Al = (2/6) × moles of HCl

                = (2/6) × 0.07

                = 0.0233 moles

Finally, we can convert the moles of aluminum to grams using its molar mass (26.98 g/mol):

grams of Al = moles of Al × molar mass

              = 0.0233 mol × 26.98 g/mol

              = 0.628 g

Therefore, approximately 0.628 grams of aluminum are required to react with 35 ml of 2.0 M hydrochloric acid.

learn more about hydrochloric acid here:

https://brainly.com/question/14006357

#SPJ11

The energy of an electron in a hydrogen atom with an orbit of n = 3 is -5.45 x 10⁻¹⁹ J.

To calculate the energy of an electron in a hydrogen atom with an orbit of n=3, we know that the value of k is given as k = 2.18 × 10⁻¹⁸ J. We can use the Rydberg formula to calculate the energy of an electron in the hydrogen atom. The Rydberg formula states that:

1/wavelength = R(1/n1² - 1/n2²)

where R is the Rydberg constant, which is equal to 1.097 x 10⁷ m⁻¹. We can use the formula E = hν to calculate the energy of a photon with frequency ν. Where h is the Planck constant, which is equal to 6.626 x 10⁻³⁴ J s.

The energy of an electron in the hydrogen atom can be calculated using the formula

E = -Rh/n²

where Rh is the Rydberg energy, which is equal to 2.18 x 10⁻¹⁸ J, and n is the principal quantum number. The negative sign indicates that the electron is bound to the nucleus.

Substituting n = 3 and Rh = 2.18 x 10⁻¹⁸ J into the formula gives:

E = - Rh/n²

= - 2.18 × 10⁻¹⁸ J / 3²

= - 5.45 x 10⁻¹⁹ J

Learn more about hydrogen atom: https://brainly.com/question/30886690

#SPJ11

The reaction of the β-phase in an alloy of 80% Sn in the Pb-Sn system at 184°C and 182°C are such as at 184°C, the alloy is a two-phase mixture of β-phase and liquid phase, and it has the composition of 80% Sn-20% Pb. At 182°C, the alloy is a single-phase mixture of β-phase and has a composition of 80% Sn-20% Pb. There is no change in the alloy's microstructure as a result of a reaction at this temperature.

The solidus temperature is the temperature at which a mixture of solid and liquid phases coexists in equilibrium, and it is represented by the lower horizontal line of the phase diagram.

The liquidus temperature is the temperature at which a liquid mixture of two or more components begins to solidify, and it is represented by the upper horizontal line of the phase diagram.

The temperature at which the solidus and liquidus temperatures meet is known as the eutectic temperature.

The eutectic point is the point on a phase diagram where the lowest melting point is found for any mixture of the specified components.

A eutectic reaction occurs at 183°C as the β-phase and the liquid phase combine to produce a eutectic alloy of 61.9% Sn and 38.1% Pb.

Read more about β-phase.

https://brainly.com/question/15407961

#SPJ11

At a temperature of 100K, the rms speed of an oxygen molecule is approximately 483.2 m/s, the average speed is approximately 560.6 m/s, and the most probable speed is approximately 410.7 m/s.

To compute the root mean square (rms), average, and most probable speeds of an oxygen molecule (O₂) at a temperature of 100K, we can use the Maxwell-Boltzmann speed distribution equation. The equation for the speed distribution of gas molecules is given by:

f(v) = 4πv² * (m / (2πkT))^(3/2) * exp(-mv² / (2kT))

Where:

f(v) is the speed distribution function,

v is the speed of the molecule,

m is the mass of the molecule (in this case, the mass of an oxygen molecule O₂),

k is the Boltzmann constant, and

T is the temperature in Kelvin.

To calculate the rms, average, and most probable speeds, we need to integrate this equation over the range of possible speeds. However, for simplicity, we can use the simplified expressions for the speeds:

For rms speed (v_rms):

v_rms = √(3kT / m)

For average speed (v_avg):

v_avg = √(8kT / πm)

For most probable speed (v_mp):

v_mp = √(2kT / m)

Now let's calculate these values:

Given:

Temperature (T) = 100K

Mass of an oxygen molecule (m) = 5.31 × 10⁻²⁶ kg

Boltzmann constant (k) = 1.38 × 10⁻²³ J/K

Calculating the rms speed (v_rms):

v_rms = √(3 * 1.38 × 10⁻²³ J/K * 100K / (5.31 × 10⁻²⁶ kg))

v_rms ≈ 483.2 m/s (to three significant figures)

Calculating the average speed (v_avg):

v_avg = √(8 * 1.38 × 10⁻²³ J/K * 100K / (π * 5.31 × 10⁻²⁶ kg))

v_avg ≈ 560.6 m/s (to three significant figures)

Calculating the most probable speed (v_mp):

v_mp = √(2 * 1.38 × 10⁻²³ J/K * 100K / (5.31 × 10⁻²⁶ kg))

v_mp ≈ 410.7 m/s (to three significant figures)

Therefore, at a temperature of 100K, the rms speed of an oxygen molecule is approximately 483.2 m/s, the average speed is approximately 560.6 m/s, and the most probable speed is approximately 410.7 m/s.

Learn more about RMS speed from the link given below.

https://brainly.com/question/33262591

#SPJ4

The pH and the pOH of an aqueous solution that is 0.045 M in HCl(aq) and 0.095 M in HBr(aq) at 25 °C is 1.35, and 12.98 respectively.

To calculate the pH and pOH of the solution, we need to use the concentration of the acidic solutions and the dissociation constants of HCl and HBr.

First, calculate the pH:

For HCl (aq):

[HCl] = 0.045 M

HCl is a strong acid and dissociates completely in water, so the concentration of H⁺ ions is equal to the concentration of HCl:

[H⁺] = 0.045 M

Taking the negative logarithm (base 10) of the H⁺ concentration gives us the pH:

pH = -log10(0.045)

pH = 1.35

Now, let's calculate the pOH:

For HBr(aq):

[HBr] = 0.095 M

HBr is also a strong acid, and its dissociation is similar to HCl. The concentration of H⁺ ions is equal to the concentration of HBr:

[H⁺] = 0.095 M

Again, taking the negative logarithm (base 10) of the H⁺ concentration gives us the pH:

pH = -log10(0.095)

pH = 1.02

Since pH + pOH = 14 (at 25 °C), we can calculate the pOH:

pOH = 14 - pH

pOH = 14 - 1.02

pOH = 12.98

Therefore, the pH of the solution is approximately 1.35, and the pOH is approximately 12.98.

To know more about aqueous solution here

https://brainly.com/question/1382478

#SPJ4

The efficiency of the boiler is 1.57%.

The efficiency of a boiler in a coal-fired power plant can be determined from the given data below:

Efficiency of a boiler

Efficiency is the ratio of the useful energy output to the total energy input.

The efficiency of a boiler is given by:

Efficiency, η = Output/Input

                    = Heat absorbed by steam/Heat provided by coal

Where Heat provided by coal = Mass of coal × calorific value of coal η

                                                 = Heat absorbed by steam/(Mass of coal × calorific value of coal)

Heat absorbed by steam = Mass flow rate of steam × specific enthalpy of steam

Mass flow rate of steam can be calculated using the mass flow rate of coal and the moisture content in the coal.

By using Dulong's formula, the calorific value of coal can be calculated.

Calorific value of coal = C x 33700 + H2 x 144200 + O2 x 9320 + S x 3300 - M x 10900 - A x 2500

where C, H2, O2, S, M and A are the mass fractions of carbon, hydrogen, oxygen, sulfur, moisture, and ash in the coal. The moisture content is the percentage of water that is present in the coal, and the ash content is the percentage of incombustible materials that are present in the coal.

Mass of coal = 10 metric tons/hr

                     = 10000 kg/hrC

                     = 78%, H2

                     = 3%, O2

                     = 3%, S

                     = 1%,

M = 7%,

A = 8%

Calorific value of coal = 78 x 33700 + 3 x 144200 + 3 x 9320 + 1 x 3300 - 7 x 10900 - 8 x 2500

                                    = 714420 kJ/kg

Mass flow rate of steam = Mass flow rate of coal × (100 - Moisture content) × Specific enthalpy of steam/Calorific value of coal Moisture content

                                        = M/(100 - M)

                                        = 7/(100 - 7)

                                        = 7.53%

Specific enthalpy of steam can be found using steam tables.

At 18 cm H2O plenum chamber pressure and 21°C,

the specific enthalpy of steam is 2952.5 kJ/kg.

Calorific value of coal = 714420 kJ/kg

Specific enthalpy of steam = 2952.5 kJ/kg

Mass flow rate of steam = 10000 × (100 - 7.53) × 2952.5/714420

                                        = 38.06 kg/s

Heat absorbed by steam = Mass flow rate of steam × Specific enthalpy of steam

                                         = 38.06 × 2952.5

                                         = 112292.05 kJ/s

Heat provided by coal = Mass of coal × Calorific value of coal

                                     = 10000 × 714420

                                     = 7144200000 J/s

                                     = 7144.2 MJ/s

Efficiency,

η = Output/Input

  = Heat absorbed by steam/Heat provided by coal

  = 112292.05/7144200= 0.0157 or 1.57%

Therefore, the efficiency of the boiler is 1.57%.

Learn more about Efficieny from the given link;

https://brainly.com/question/13222283

#SPJ11

Chemicals that are used for cleaning and sanitizing should be stored in a safe and appropriate manner to ensure the safety of food and prevent contamination.

According to ServSafe guidelines, chemicals should be stored in a designated storage area separate from food, utensils, equipment, and other supplies. Here are some important considerations for storing cleaning and sanitizing chemicals:

1. Storage Location: Choose a well ventilated area away from food preparation and storage areas. Ideally, have a separate, locked storage room or cabinet specifically designated for chemicals.

2. Segregation: Store chemicals away from food and food-contact surfaces to prevent cross contamination. Keep them in a separate area or on separate shelving.

3. Labels and Identification: Ensure that all chemical containers are properly labeled with the name of the chemical, instructions for use, and any hazard warnings. This helps in easy identification and prevents accidental misuse.

4. Accessibility: Store chemicals in a location that is easily accessible to authorized personnel but out of reach of children, unauthorized individuals, and pests.

5. Compatibility: Store chemicals in a way that prevents them from coming into contact with each other, especially if they are incompatible. Different chemicals may have reactive properties, and storing them together can lead to dangerous reactions or spills. Follow manufacturer guidelines for proper storage and segregation.

6. Spill Containment: Use spill containment measures such as trays or secondary containers to prevent leaks and spills from spreading and contaminating other items or areas.

7. Security: Limit access to the storage area by keeping it locked or restricted to authorized personnel only. This prevents unauthorized individuals from accessing and potentially misusing the chemicals.

To know more about chemicals here

https://brainly.com/question/32891137

#SPJ4

Sunspot activity is a force that, when active, decreases solar flux.

Answer: False.

Deforestation removes (acts as a sink for) CO2.

Answer: False.

Sunspot activity is known to have the opposite effect on solar flux. When sunspot activity is active, it actually increases solar flux. Sunspots are cooler regions on the sun's surface that appear as dark spots. They are associated with intense magnetic activity, which can lead to increased solar flares and coronal mass ejections. These events release large amounts of energy and increase the solar flux, causing an elevation in the intensity of solar radiation reaching Earth.

Deforestation does not act as a sink for CO2; instead, it contributes to increased levels of carbon dioxide in the atmosphere. Trees play a crucial role in carbon sequestration as they absorb CO2 during photosynthesis and store it in their biomass. However, deforestation involves the removal or destruction of trees, which leads to the release of stored carbon back into the atmosphere as CO2. This process contributes to the greenhouse effect and exacerbates climate change. Deforestation is considered a major driver of CO2 emissions and loss of carbon sinks, thereby accelerating the accumulation of CO2 in the atmosphere.

learn more about carbon sequestration here:

https://brainly.com/question/30123473

#SPJ11

Based on the data provided, (A) the cost of generating electricity by using cane sugar = $4.656×10⁵ ; (B) the mega-joules of energy that corresponds to 4.967×10⁴ gallons of gasoline is 6.191 × 10⁶ MJ.

The electrical energy obtained from the sugar is calculated by the given formula :

Energy = mass × specific heat capacity × change in temperature

We have the following data :

Mass of cane sugar = 5 pounds

Specific heat capacity of cane sugar = 1300 J/kg °C

Change in temperature = 50 °C

(A) For calculating the cost of producing 3.68×10³ kWh of electrical energy from cane sugar, we first need to find the mass of sugar required.

We have the following data :

1 kilowatt-hour (kWh) = 3.6×10⁶ J3.68×10³ kWh = 3.68×10³ × 3.6×10⁶ J = 1.3248×10¹⁰ J

For 1 kilogram of cane sugar, Energy produced = mass × specific heat capacity × change in temperature

For 1 pound of cane sugar, Energy produced = mass × specific heat capacity × change in temperature

But, we need Energy produced for 1.3248×10¹⁰ J. So, we have to convert pounds to kilograms.

For 1 kilogram, mass = 2.20462 pounds

So, for 1 pound, mass = 1/2.20462 = 0.4536 kg

Energy produced for 1 pound cane sugar = mass × specific heat capacity × change in temperature

= 0.4536 × 1300 × 50= 2.3484×10⁴ J

For producing 1.3248×10¹⁰ J, mass of cane sugar required= (1.3248×10¹⁰)/2.3484×10⁴ = 5.637×10⁵ kg

Cost of one 5-pound bag of cane sugar = $4.19

Therefore, the cost of 5.637×10⁵ kg of cane sugar = (5.637×10⁵/5) × $4.19= $4.656×10⁵

Cost of producing 3.68×10³ kWh of electrical energy by using cane sugar =$4.656×10⁵

(B) To find the mega-joules of energy that corresponds to 4.967×10⁴ gallons of gasoline  

To solve this problem, we need to use the following conversion factors :

1 gallon of gasoline = 3.7854 litres of gasoline

1 litre of gasoline = 0.26417 gallons of gasoline

1 gallon of gasoline = 3.7854 × 10⁻³ m³ of gasoline

Density of gasoline = 730 kg/m³

Energy content of gasoline = 45.8 MJ/kg

Given data :

Volume of gasoline = 4.967×10⁴ gallons

Energy content of gasoline = 45.8 MJ/kg

Density of gasoline = 730 kg/m³

We can find the mass of gasoline using the density of gasoline.

Mass = volume × density= (4.967×10⁴ gallons) × (3.7854 × 10⁻³ m³/gallon) × (730 kg/m³)= 1.3529 × 10⁵ kg

Energy = mass × energy content of gasoline= (1.3529 × 10⁵ kg) × (45.8 MJ/kg)= 6.19102 × 10⁶ MJ

= 6.191 × 10³ GJ= 6.191 × 10⁻³ TJ= 6.191 × 10⁶ MJ

Therefore, the mega-joules of energy that corresponds to 4.967×10⁴ gallons of gasoline is 6.191 × 10⁶ MJ

Thus, the required answers are : (A) $4.656×10⁵ ; (B) 6.191 × 10⁶ MJ.

To learn more about specific heat capacity :

https://brainly.com/question/29792498

#SPJ11

a) the average kinetic energy would increase by a factor of 4 b) the speed of molecules will increase by a factor of 2. The relationship between the average kinetic energy of gas molecules and temperature is direct. The Kelvin scale can be used to determine how much the average kinetic energy rises.

(New temperature / Initial temperature) is a factor. (1000 K / 250 K) = 4 as a factor. As a result, the helium molecules' typical kinetic energy increased by a factor of 4. The square root of the temperature determines the speed of gas molecules.

The Kelvin scale can be used to determine how much the molecules' speed increases. (New temperature / Initial temperature) = Factor. Factor is equal to (1000 K / 250 K) = 4 = 2. Consequently, the helium molecules moved twice as quickly.

to know more about average kinetic energy refer to the link below

https://brainly.com/question/492249

#SPJ4

Option B: In most pantomographic units, the central ray of the X-ray beam is directed horizontally.

By aiming the central ray horizontally, the X-ray machine can rotate around the patient's head in a semi-circular motion. During this rotation, the X-ray detector and the X-ray source move simultaneously in opposite directions. This synchronized movement allows for a continuous exposure of the X-ray film or sensor, creating a panoramic image.

The horizontal positioning of the central ray enables the panoramic X-ray machine to capture a wide field of view that includes both the upper and lower jaws, teeth, surrounding bone structures, and other important anatomical features. This comprehensive image assists dental professionals in evaluating the overall dental and skeletal structures, identifying dental abnormalities, assessing impacted teeth, examining the temporomandibular joint, and detecting potential pathology.

To know more about X-ray, refer:

https://brainly.com/question/31170943

#SPJ4

The photon that carries more energy is the blue photon, and it carries around 50% more energy than the average orange photon (590-620 nm). The law used to solve the previous problem suggests that energy is proportional to the frequency of an electromagnetic wave. Thus, the higher the frequency, the higher the energy. The correct option is C.

In electromagnetic radiation, the energy carried by each photon is directly proportional to the frequency and inversely proportional to the wavelength. Thus, higher frequency photons carry more energy than lower frequency photons.

A photon's energy is directly proportional to its frequency and inversely proportional to its wavelength. Thus, higher frequency photons, such as blue photons, carry more energy than lower frequency photons, such as orange photons. The energy of a photon is given by the equation: E = hf

Where E is energy, h is Planck's constant (6.63 x 10⁻³⁴ J s), and f is frequency.

To know more about photon, refer to the link below:

https://brainly.com/question/33017722#

#SPJ11

To produce 4-methyl-2-pentene by an acid catalysed dehydration reaction we need an alcohol that has a hydroxyl group (-OH) attached to the carbon atom adjacent to the methyl group and the pentyl group.

B. 4-methyl-3-pentanol.

The process of acid catalyzed dehydration involves the removal of a water molecule from an alcohol molecule. In this case, we want to produce 4-methyl-2-pentene, which means we need to remove a water molecule from an alcohol that has the appropriate structure.

CH₃-CH₂-CH(CH₃)-CH₂-CH₂-OH

In this structure, the hydroxyl group (-OH) is attached to the carbon atom adjacent to the methyl group (CH₃) and the pentyl group (CH₂-CH₂-CH₂). This is the desired arrangement for the alcohol.

During an acid catalyzed dehydration reaction, an acid catalyst, such as sulfuric acid (H₂SO₄), is used to facilitate the removal of a water molecule. The acid protonates the hydroxyl group, making it a better leaving group. Then, a carbocation intermediate is formed, followed by the elimination of a water molecule to generate the alkene.

By subjecting 4-methyl-3-pentanol to an acid-catalyzed dehydration reaction, the hydroxyl group can be eliminated, resulting in the formation of 4-methyl-2-pentene:

CH₃-CH₂-CH(CH₃)-CH₂-CH₂-OH → CH₃-CH₂-CH(CH₃)-CH₂-CH=CH₂ + H₂O

Therefore, based on the given options, B. 4-methyl-3-pentanol is the appropriate alcohol to produce 4-methyl-2-pentene through an acid-catalyzed dehydration reaction.

To know more about dehydration reaction here

https://brainly.com/question/29262706

#SPJ4

The linear equation that converts from degrees "S" to degrees Celsius is:

°C = (100°C / 75.0) * "S" - 20°C

To develop a linear equation that converts from degrees "S" to degrees Celsius, we need to establish a relationship between the two temperature scales. We can use the concept of linear interpolation to determine the equation.

Given that on the "Strange" temperature scale, the freezing point of water is -15.0 degrees "S" and the boiling point of water is 60.0 degrees "S," we can set up two data points:

Point 1: (-15.0, 0°C) - freezing point of water

Point 2: (60.0, 100°C) - boiling point of water

Using these two points, we can find the equation of the line in slope-intercept form (y = mx + b), where "y" represents degrees Celsius (°C) and "x" represents degrees "S."

First, let's calculate the slope (m):

m = (change in y) / (change in x)

m = (100°C - 0°C) / (60.0 - (-15.0))

m = 100°C / 75.0

Now, let's substitute one of the points into the slope-intercept form to find the y-intercept (b):

0 = (100°C / 75.0) * (-15.0) + b

b = -20°C

Therefore, the linear equation that converts from degrees "S" to degrees Celsius is:

°C = (100°C / 75.0) * "S" - 20°C

This equation allows you to convert temperatures from the "Strange" scale (degrees "S") to the Celsius scale (°C).

Learn more about Freezing Point at

brainly.com/question/31357864

#SPJ4

The concentration of hydrogen at the low-pressure (or B) side of the membrane is 9.99E-6 wt%, and the concentration of hydrogen at the high-pressure (or A) side is 7.79E-5 wt%.

At the low-pressure (or B) side, the concentration of hydrogen is 9.99E-6 wt%. At the high-pressure (or A) side, the concentration of hydrogen is 7.79E-5 wt%.

The given problem involves the diffusion of hydrogen through an iron membrane.

The diffusion flux can be calculated using Fick's law of diffusion, which states that the flux (J) is equal to the diffusion coefficient (D) multiplied by the concentration gradient (ΔC) across the membrane.

In this case, we are given the thickness of the iron membrane (2.7 mm), the hydrogen pressures on both sides (0.16 MPa and 7.0 MPa), and the diffusion system parameters (Do = [tex]4.8 \times 10^7[/tex] m²/s and Q = 11 kJ/mol).

We can calculate the concentration gradient (ΔC) using the given concentrations and convert the thickness of the membrane to meters.

Learn more about concentration of hydrogen

brainly.com/question/15082545

#SPJ11