The frictional force between the crate and the ramp is determined as 35.2 N.
Energy lost to frictional forceApply the principle of conservation energy to calculate the change in the energy of the crate.
Change in energy of the crate = energy loss to friction
P.Ei - K.Ef = E
mgh - ¹/₂mv² = E
where;
m is mass of the crateh is vertical height traveled by the cratev is the final velocity of the crate(30)(9.8)(2) - (0.5)(30)(2²) = E
528 J = E
Frictional force between the crate and the rampE = Fd
where;
F is the frictional forced is the distance traveled by the crateF = E/d
F = (528)/(15)
F = 35.2 N
Thus, the frictional force between the crate and the ramp is determined as 35.2 N.
Learn more about frictional force here: https://brainly.com/question/4618599
#SPJ1
A car with a mass of 1000 kg accelerates from 0 to 90 km/h in 10 seconds. a) What is its acceleration? b) What is the net force on the car?
Answer:
v
f=90km/h=25m/s
v_{_{i}}=0v
i=0
t=10\;\mathrm{s}t=10s
m=1000\;\mathrm{kg}m=1000kg
The acceleration of the car is 2.5 m/s². The net force acting on the car is 2500 Newtons (N). The correct answers are 2.5 m/s², 2500 Newtons (N).
Given:
Mass of the car (m) = 1000 kg
Acceleration (a) = 2.5 m/s²
a) The acceleration of the car is:
Acceleration (a) = Change in velocity / Time taken
Final velocity (v(f)) = 90 × 0.27778 = 25 m/s
Acceleration (a) = (Final velocity - Initial velocity) / Time taken
Acceleration (a) = (25 - 0 ) / 10
Acceleration (a) = 2.5 m/s²
Therefore, The acceleration of the car is 2.5 m/s².
b) Newton's second law of motion:
F = m × a
F = 1000 × 2.5
F = 2500 N
The net force acting on the car is 2500 Newtons (N).
To know more about the acceleration:
https://brainly.com/question/30660316
#SPJ3
density of a substance ratio
Answer:
Density of a substance is the ratio of mass of the substance to its volume.
Answer:
Density of a substance is the ratio of mass of the substance to its volume.
A simple pendulum suspended in a rocket ship has a period [tex]T_{0}[/tex]. Assume that the rocket ship is near the earth in a uniform gravitational field.
True or false:
1. If the ship moves upward with a constant velocity, the period increases.
2. If the length of the pendulum is doubled, the new period will be: square root of 2 times [tex]T_{0}[/tex].
3. If the ship accelerates upward, the period increases.
4. If the ship accelerates downward at 9.81 [tex]m/s^{2}[/tex], the pendulum will no longer oscillate.
5. If the mass of the pendulum is halved, the period decreases.
(1) If the ship moves upward with a constant velocity, the period increases, false.
(2) If the length of the pendulum is doubled, the new period will be: square root of 2 times T₀. true.
(3) If the ship accelerates upward, the period increases, true.
(4) If the ship accelerates downward at 9.81 m/s² , the pendulum will no longer oscillate, false.
(5) If the mass of the pendulum is halved, the period decreases, false.
Period of a simple pendulum
The period of a simple pendulum is given as;
T = 2π√(L/g) ------- (1)
where;
L is length of the pendulumg is acceleration due to gravityWhen the ship moves upward with a constant velocity, the period will not change.
When the length of the pendulum is doubledT ∝√L
when, L = 2L₀
T = T₀√2
Thus, if the length of the pendulum is doubled, the new period will be: square root of 2 times T₀.
when ship accelerates upwardt = √2h/g
when the height increases, time or period increaseswhen mass of the pendulum is halvedT = √I/mgd
where;
m is mass of the pendulumwhen the mass is halved, the period increases.
Learn more about period of pendulum here: https://brainly.com/question/26524032
#SPJ1
a ball bearing x is dropped vertically downwards,from the edge of a table and it takes 0.5seconds to hit the floor. Another bearing y leaves from the edge of the table horizontally with a velocity of 5m/s . Find:.
a)the time taken for bearing y to reach the table?
b)the horizontal distance traveled by y before hitting the floor
c)the height of the table top above the floor level
Answer:
See below
Explanation:
A) bearing y reaches the FLOOR in the same amount of time .5 seconds since there is no initial vertical velocity component
B. in .5 seconds y will travel 5 m/s * .5 s = 2.5 meters horizontally
C. d = 1/2 a t^2
= 1/2 (9.81)(.5^2) = 1.23 m table height
(a) Bearing y takes 0.2 seconds to reach the table. (b) Bearing y travels 1 meter horizontally before hitting the floor. (c) The height of the table top above the floor level is 1.225 meters.
a) Time is taken for bearing y to reach the table:
For a horizontal motion, the equation to calculate time is:
Time (t) = Distance (d) ÷ Velocity (v)
Time (t) = Width of the table / Velocity of y
t = 1 / 5
t = 0.2 sec
So, bearing y takes 0.2 seconds to reach the table.
b) Horizontal distance traveled by bearing y before hitting the floor:
Distance (d) = Velocity (v) × Time (t)
d = 5 × 0.2
d = 1 m
So, Bearing y travels 1 meter horizontally before hitting the floor.
c) The height of the table top above the floor level:
h = (1/2) × g × t²
h = (1/2) × 9.8 × (0.5)²
h = (1/2) × 9.8 × 0.25
h = 1.225 m
So, the height of the table top above the floor level is 1.225 meters.
To know more about the height and distance:
https://brainly.com/question/9965435
#SPJ7
Explain the mechanism by which an open fracture could result in shock.
Answer:
an open fracture contains some sort of water which if it comes in contact with electrons could result to a shock
Suppose you need your silicon circuit element to run continuously for 3 minutes before it shuts off long enough to cool back down to its initial temperature. If the circuit element can withstand a temperature change of 5.1 ∘C without being damaged, what is the maximum rate at which energy can be added to the circuit element?
The maximum rate at which energy can be added to the circuit element mathematically given as
[tex]MER=5.044 \times 10^{-4} \mathrm{~J} / \mathrm{sec}[/tex]
What is the maximum rate at which energy can be added to the circuit element?Generally, the equation for P is mathematically given as
[tex]P=\ln s \frac{\Delta T}{\Delta t}[/tex]
Therefore
[tex]Rate\ of\ Change\ of\ Temp =\frac{p}{lnS}[/tex]
[tex]\frac{p}{lnS}=\frac{7.4 \times 10^{-3}}{23 \times 10^{-6} \times 705}[/tex]
[tex]\frac{p}{lnS}=0.456^{\circ \mathrm{c}} / \mathrm{sec}[/tex]
Max temp Change
[tex]MaxT=5.6^{\circ} \mathrm{C}[/tex]
[tex]\text { time }=3 \times 60[/tex]
t=180s
In conclusion, Max Energy Rate
[tex]MER =23 \times 10^{-6} \times \frac{301 \times 5.6}{180}[/tex]
[tex]MER=5.044 \times 10^{-4} \mathrm{~J} / \mathrm{sec}[/tex]
Read more about Energy
https://brainly.com/question/13439286
#SPJ1
An object is thrown upward with initial velocity of 30m/s at angle of 30 degree to the horizontal. calculate the components of the initial velocity.
Answer:
Vo (vertical) = Vo sin 30 = 30 m/s / 2 = 15 m/s
Vo (horizontal) = Vo cos 30 = .866 30 m/s = 26 m/s
is power and voltage the same thing yes or no
A 5 Ω and a 5 Ω resistor are in parallel. What is their total resistance?
A. 10 Ω
B. 2.5 Ω
C. 25 Ω
D. 5 Ω
Answer:
B. 2.5 Ω
Explanation:
[tex]\frac{1}{5} +\frac{1}{5}=0.4[/tex]
Put a one on top of the 0.4
[tex]\frac{1}{0.4} =2.5[/tex]
is a pot plant a closed system?
Answer:
No because a pot plant system must interact with its surroundings (air, water, etc) and these are not closed systems.
Only if the pot plant were completely enclosed, say in a large glass jar would the system be closed.
Consider the ballistic pendulum collision. The projectile, of mass m, is fired into a large block of mass M. (Figure 1)
a) Derive a formula for the fraction of the magnitude of kinetic energy lost
Express your answer in terms of the variables m and M .
b)Evaluate the fraction for m = 18.0 g and M = 380 g .
Express your answer using three significant figures.
The fraction of the magnitude of the kinetic energy lost is [tex]\frac{(change) KE }{KE} = 1 - \frac{m}{m + M }[/tex]. = 0.955.
using the law of conservation of momentum,
[tex]mv=(m+M)V[/tex]
[tex]V= m ( \frac{1}{M+m} ) v\\[/tex]
kinetic energy lost,
Δ[tex]KE=KE_{i} -KE_{f}[/tex]
(see image )
now, for the other part
the fraction of the kinetic energy lost,
ΔKE/ KE = [tex]1- m (\frac{1}{m+M} )[/tex]
ΔKE/ KE = [tex]1 - 18 ( \frac{1}{18 + 380 } )[/tex]
ΔKE/ KE = 0.955.
what is kinetic energy ?
The energy that an object has as a result of motion is known as kinetic energy. It is stated as the effort needed to transfer a bulk body from rest to the given velocity. The body holds onto the kinetic energy it gained during its acceleration until its speed changes.
Learn more about kinetic energy here:-
https://brainly.com/question/999862
#SPJ1
Is it possible for an object to be in equilibrium (no net force), if only one force is acting on it ?
1. What type of waves can only travel through a medium?
Answer:
A mechanical wave can only travel through a medium.
Particles that are __________ can transfer heat energy as they vibrate.
A. The same size
B. The same color
C. Very close together
D. Very far apart
How does the suns energy affect the climate of an area
Answer:
the earth receives the suns energy as radiation which is able to travel without the need of matter from point A to point B and this radiation is also in the form of heat.
Explanation:
Sun's energy fall on the earth in form of radiation and heats up the atmosphere and produces unequal heating due to its spherical nature and impacts climate of different areas.
The Sun is the only source of energy for the Earth's climate system. Fundamental to atmospheric composition is the warming of the atmosphere caused by solar radiation, which also causes global wind patterns and aids in the development of clouds, storms, and rainfall.
When the sun is at its maximum (peak in sunspots, prominences, and flares), it produces more ultraviolet (UV) radiation. More ozone is produced as a result of UV light, warming the stratosphere. The lower atmosphere and Earth's surface warm slightly as a result of the increased solar radiation.
Learn more about sun here;
https://brainly.com/question/17376727
#SPJ1
In thicker materials the particles can move more easily, therefore the resistance has to ____________.
A. Increase
B. Decrease
C. Stay the same
D. Not enough info
In thicker materials the particles can move more easily, therefore the resistance has to decrease.
Hence Option (b) is correct.
Resistivity, which is sometimes represented by the Greek letter rho, is quantitatively equal to a specimen's resistance R times its cross-sectional area A times its length.
ρ = R × A/ l
R = ρ × l/ A
It means the Resistance of the material is inversely proportional to the area of the material.
As the area of the material increases, the resistance decreases and vice versa.
Hence, In thicker particles, there is a greater area available and that's why resistance has to decrease so that particles can move more easily.
Hence, Option (b) is correct.
Learn more about Resistance & Resistivity here https://brainly.com/question/13735984
#SPJ1
Circle the anomalous result in the table below. An anomaly is a piece of data that doesn't
fit in with the rest of the data.
1. Concentration of
sucrose (M)
0.25
0.5
1
1.5
2
2. Change in mass of piece of potato (g)
Group B's
Group A's
measurements
0.02
0.05
0.12
0.17
0.21
3. measurements
0.03
0.05
2.3
0.14
0.2
Average?
Pls help I need to get this done really soon otherwise I will get a detention for two hours after school with my least fave teacher plss it’s for a test!!!!!!
Answer:
Explanation:
yes
Using the Left Hand Rule, if motion is down and the current is toward you, which way is the field?
In the left-hand rule, the field is represented by the forefinger and it is perpendicular to the motion.
Fleming’s Left-Hand Rule:A force perpendicular to the field's direction and the direction of the current flow is experienced by a current-carrying conductor when it is exposed to an external magnetic field. According to Fleming's Left Hand Rule, if the thumb, forefinger, and middle finger are arranged in a straight line on the left hand, the thumb will point in the direction of the force experienced by the conductor, and the forefinger will point in the direction of the magnetic field, and the middle finger will point in the direction of the electric current. This rule is employed to determine the magnetic force's direction within an electric motor.
Fleming’s Left-Hand Rule are essential rules applicable in magnetism and electromagnetism. They were created by John Ambrose Fleming in the late 19th century as an easy method of determining the direction of motion in an electric motor.
Learn more about Fleming’s Left-Hand here:
https://brainly.com/question/956563
#SPJ1
4 Four objects are stiuated along the y axis as follow: a 20 kg object is at +3 m, a 3 kg object is at +2.5 m, a 2.5 kg object is at origin, and a 4 kg object is at -5 m. What is the center of mass of these objects?
Answer: 1.348 meters
Explanation: Although the sign is missing from the location of the 4.00 kg object, it is assumed to be positive. The net moment of all the objects about the center of mass must be zero. Let the center of mass be on the y axis at a point c . Adding the four moments together, we get:
(2.00)(3.00−c)+(3.00)(2.50−c)+(2.50)(0−c)+(4.00)(0.500−c)=0
6.00−2.00c+7.50−3.00c+0−2.50c+2.00−4.00c=0
11.5c=15.50
c= 1.348 metres
The center of mass is on the y axis at y = 1.348 metres.
i. Which of the following formula gives definition of relative density? d d B. A. C. d water at 4°C d d mercury at 4°C D. d water at 40°C d d alcohol at 4°C
Answer:
water at 4°c that's abnormal stage of water
what is barometer ???
Answer:
an instrument measuring atmospheric pressure, used especially in forecasting the weather and determining altitude.
Explanation:
hope it helps ya
I = 30A and R = 30; what is V?
A. 900v
B.90v
C.10v
D.0.1v
Answer:
[tex]V = 900\; {\rm V}[/tex] for a resistor where [tex]I = 30\; {\rm A}[/tex] and [tex]R = 30\; {\rm \Omega}[/tex].
Explanation:
By Ohm's Law, if the electric resistance of a resistor is [tex]R[/tex] and the current going through that resistor is [tex]I[/tex], the voltage across that resistor would be [tex]V = I\, R[/tex].
Note that electric resistance is typically measured in Ohms, where [tex]1\; {\rm \Omega} = 1\; {\rm V \cdot A^{-1}}[/tex].
Given that [tex]I = 30\; {\rm A}[/tex] and [tex]R = 30\; {\rm \Omega}[/tex] for the resistor in this question, apply the formula [tex]V = I\, R[/tex] to find the voltage [tex]V[/tex] across this resistor:
[tex]\begin{aligned} V &= I\, R \\ &= 30\; {\rm A} \times 30\; {\rm \Omega} \\ &= 30\; {\rm A} \times 30\; {\rm V \cdot A^{-1}} \\ &= 900\; {\rm V} \end{aligned}[/tex].
A bead of mass 15g is sliding on a wire. It has a speed of 2.0m/s at A, and it stops as it reaches the point C. The length of the wire from A to C is 250cm. How large an average friction force opposed the motion of the bead?
Answer:
.12 N
Explanation:
Velocity goes from 2 m/s to 0 m/s so average velocity = 1 m/s
.250 m / 1 m/s = .25 second to stop
change in velocity / change in time = accel
2 m/s / .25 sec = 8 m/s^2
F = ma
= .015 kg * 8 m/s^2 = .12 N
If a skydiver jumps out of a plane horizontally (in other words with no initial vertical velocity), then what will her vertical speed be after having fallen a vertical distance of 50.8m if you neglect air resistance over that distance?
The final vertical velocity of the skydiver at 50.8 m of fall is 31.56 m/s.
Time of motion of the girl
The time of motion of the girl is calculated as follows;
h = vt + ¹/₂gt²
where;
v is initial vertical velocity = 0t is time of motiong is acceleration due to gravitySubstitute the given parameters and solve for time of motion;
50.8 = 0 + ¹/₂(9.8)t²
2(50.8) = 9.8t²
101.6 = 9.8t²
t² = 101.6/9.8
t² = 10.367
t = √10.367
t = 3.22 seconds
Final vertical velocity of the skydivervf = vi + gt
where;
vi is the initial vertical velocity = 0
vf = 0 + 9.8(3.22)
vf = 31.56 m/s
Thus, the final vertical velocity of the skydiver at 50.8 m of fall is 31.56 m/s.
Learn more about vertical velocity here: https://brainly.com/question/24949996
#SPJ1
Glucose solution is administered to a patient in a hospital. The density of the solution is 1.308 kg/l. If the blood pressure in the vein is 35.7 mmHg, then what is the minimum necessary height of the IV bag above the position of the needle?
The minimum necessary height of the IV bag above the position of the needle is 0.37 m.
Minimum necessary heightThe minimum necessary height of the IV bag above the position of the needle is calculated as follows;
P = ρgh
where;
ρ is density = 1.308 kg/L = 1308 kg/m³g is acceleration due to gravity = 9.8 m/s²p is pressure = 35.7 mmHg = 4759.609 Pah is height, (m) = ?Substitute the given parameters and solve for minimum height
h = P/ρg
h = (4759.609) / (9.8 x 1308)
h = 0.37 m
Thus, the minimum necessary height of the IV bag above the position of the needle is 0.37 m.
Learn more about pressure here: brainly.com/question/25736513
#SPJ1
progress of science has not caused any ill effect true or false?
Is there any change in mass of substance after it changes its state? Explain with an example
Answer:
No
Explanation:
When a substance changes its state , there will not be any change in the mass of substance . For example , if we change 100 grams of water (liquid) to ice(solid) , the mass of ice will be same i.e., 100 grams . This shows there is no change in the mass even if a substance changes its state.
MARK ME AS BRAINLIST
What climate zone are you in temperatures are always very warm Where is this zone located on Earth
Answer:
Warm weather may be found in the tropical zone since the sun's heat is concentrated in regions close to the equator. At 23.5 degrees north of the equator and 23.5 degrees south of the equator, this area is nearly in the middle of the world. It has a monthly average temperature of 18 degrees Celsius or higher.
Explanation:
When a 6kg block is placed on a vertical spring, the spring is compressed by 20cm. How much work is required to compress the spring by an additional 10CM
Answer:
Mass of block = 6kg
wright = 6 × g = 60 N using g = 10 m/s^2 .
compression= 0.20m
spring constant =( weight / compression) =( 60/0.20) = 300 N/m .
Work done in compressing 0.20 m =( 1/2 × 300 × 0.20 × 0.20)= 6 joule.
Additional compression = 0.10 m
total compression = 0.20+ 0.10= 0.30 m.
Total work done = ( 1/2 × 300 × 0.30× 0.30) = 13.5 joule.
Hence work done in compressing from 0.20 m to 0.30 m will be = ( 13.5 - 6) = 7.5 joule.
Note :- work done in compressing a spring having spring constant K N/m by x m is equal to 1/2× (K) × X^ 2 .
Why does Usain bolt run?
Answer:
because he's fast and speedy
Explanation: